Log bath 6 5. Beautiful projects of log baths

  • 03.03.2020



Send to Facebook

Send to whatsapp

Sales open for 2020. Fix the price.


Sauna stove "Ermak 12" as a gift!

  • With a compact size, it has enough power to heat the steam room, which allows you to bathe in this bath in winter.
  • The central location of the chimney greatly simplifies the installation of the furnace.
  • The ventilated heater contributes to the rapid heating of the stones.
  • "Ermak 12" is more focused on maintaining the regime of the Russian bath with a moderate temperature at high humidity.
  • Self-cooling handle.
  • Spacious, ventilated open heater.
  • Hole for cleaning gas ducts.

Finishing a pair of aspen lining grade "A" as a gift!

  • Lining grade A is in many ways similar to more expensive counterparts.
  • It is distinguished by a small number of defects. There are no "falling out" knots. If there are cracks, they are not through and occupy a small percentage of the entire volume of the board. The core occupies no more than 20%.
  • On such a product there is neither rot nor blue. Black knots are also not allowed.
  • Project: B-36.
  • External dimensions of the bath: 5x6 meters.
  • Material in stock: in stock. The walls of the bath are made of profiled planed timber.
  • The term for the construction of a bath on your site: 3 to 9 days.

The price of a bath 5x6 on a turnkey basis and under shrinkage

Room height

Height of the 1st floor - 2.15 m + -5 cm, (16 rows)

Exterior walls

Prof. timber 140x140 mm

Prof. timber 190x140 mm

Sauna binding

Edged timber 100x150mm

Edged timber 150x150mm

Edged timber 150x200mm

lags

Bar 40x150 mm (step 600mm)

Draft floor

Edged board 20x100 mm

Finished floor

Tongue-and-groove board, 36 mm thick, kiln dried

Partitions

Frame-panel

truss structure

Board 40x100mm (step 1000mm)

Roofing crate

Roofing film

membrane film

Ondutis A

Wind-moisture protection of the floor

glassine

Exterior finishing of gables

Ceiling

Imitation of timber 14x90-120 mm chamber drying

Insulation: floor and ceiling

Mezhventsovye warming

Linen jute cloth

Roof

Wavy sheets Ondulin (color: red, brown, green) ()

Celestials

Width 350-400mm

Window

Wooden, double glazing. A seal with fittings is installed on the sash. ()

doors

Wooden, paneled, in the double compartment aspen with glass. ()

plinth

In the corners, the perimeter of the floor and ceiling.

Trim on windows and doors

Imitation of a bar 17х90-120 mm chamber drying

Steam room finishing

Thermal insulation Nanoizol (foil),

Aspen lining 17x90mm

Canopies

Frame from a bar 50x50mm,

finished with aspen clapboard 17x90mm

washing

A shower tray with a drainage system is installed. ()

Sauna oven

The sauna stove is not included in the basic package. We offer several sauna stoves to choose from. If you want to install your stove, then the cost of installation is 50% of the cost of the bath set.

Additional options: List of options for this project which you can order for an additional fee.

4 000 rub/pile

Pile-screw foundation, D=108mm, L=2500mm + cap. The installation includes screwing the pile, trimming to the level, pouring a cement-sand mixture grade m400 with a mortar, welding the head, delivery of the foundation is calculated separately at the rate of 60 rubles. per kilometer from Moscow Ring Road or Ring Road.

2000 rub/linear m.

Plinth panels

300 rub/m. P

Additional row of timber 90x140 mm

450 rub/m. P

Additional row of timber 140x140 mm

600 rub/m. P

Additional row of timber 190x140 mm
Additional meter of partition.
Replacing the partition with a bar.

500 rub/sq.m

Treatment of the base, rough floors and genital lags with an antiseptic composition.

370 rub/sq.m

Exterior and interior wall painting.

150 rub/sq.m

Additional layer of insulation in 50 mm "ISOVER".

250 rub/sq.m

Replacing a 27mm thick floorboard with a 36mm thick sheet piling.

850 rub/sq.m

Replacement roofing"Onduline" on the metal tile 0.45mm "Supermonterrey", polyester coating (color of your choice).
Replacement front door to metal.

7 000 rub/corner

Assembling a log house in a "warm corner" (additional protection against blowing).

2 000 rub/row

Assembling the log house on wooden birch dowels (improves the shrinkage process).
Window replacement for 1x1.2 (wooden double glazing)
Window replacement with 0.8x0.8 (wooden double glazing)
Replacement wooden window on plastic (Size 600x600mm, two-chamber, color - white).
Replacing a wooden window with a plastic one (Size 800x800mm, two-chamber, color - white).
Replacing a wooden window with a plastic one (Size 1000x1200mm, two-chamber, color - white).
Replacing a wooden window with a plastic one (Size 1200x1500mm, two-chamber, color - white).
Generator rental (Customer AI-92 gasoline).
Change house for housing workers, 4x2.3m. Roofing: Onduline.

Let's build a log cabin baths without fine finishing. Six months or a year after shrinkage, you can order a turnkey finish from us or complete the bath yourself.

Beam diameter


90x140mm


140x140mm


190x140mm

Foundation

Support-columnar blocks () (One bedside table measuring 400x400x400 mm, consists of four cement blocks measuring 200x200x400 mm, interconnected by a sand-cement mixture). The cost of the pile foundation is calculated separately.

Room height

Height of the 1st floor - 2.20 m + -5cm, (16 rows)

attic floor height

(if available in the project) - 2.20 m + -5cm

Outer walls 1st

floors

Profiled timber 90x140 mm

Profiled timber 140x140 mm

Profiled timber 190x140 mm

Sauna binding

Edged timber 100x150mm

Edged timber 150x150mm

Edged timber 150x200mm

First floor joists

Bar 40x150 mm (step 600mm)

Draft floor

Edged board 20x100 mm

Partitions

1st floor

Profiled timber 90x140 mm

Frame of gables

Bar 40x100mm (step 800-1000mm)

truss structure

Bar 40x100mm (step 1000mm)

Roofing crate

Board 20x100 mm (step no more than 300-350 mm)

Roofing film

membrane film

Ondutis A

Exterior finishing of gables

Imitation of a bar 17х120-90 mm chamber drying

Mezhventsovye warming

Linen jute cloth

Roof

Ondulin (color to choose from: red, green, brown)

Celestials

Imitation of a bar 17х90-120 mm chamber drying

If you decide that you will build a bathhouse on your site and have chosen a log as the main material, this is a reasonable choice. The construction of this material is much more durable than panel, frame, as well as structures made of timber. With appropriate processing and protection of wood, it is practically not inferior in terms of durability to brick.

In the photo - log cabin baths 6x6 with a terrace

First you need to pick up a 6 by 6 bath project from a log, since starting construction without a plan is at least unreasonable.

One-story bath project

If the bath is located on your site, or there is no need for an attic floor, the easiest way is to build a one-story building, in which, nevertheless, there will be enough space for the whole company. Consider a 6x6 log bath project with a porch.

The layout is quite simple, but at the same time comfortable and functional. A small vestibule, a spacious rest room and a shower room will provide the necessary level of comfort.

This project is made of planed logs, is 2.5 meters.

In addition to wood for walls and partitions, you will need:

  • Timber for ceiling, rafter system and battens, the type of which depends on the chosen roofing material.
  • Draft and finishing floor, which can also be in a variety of variations.
  • The gables of the roof, the building looks best if they are also chopped.
  • Insulation material and foundation waterproofing, there are a lot of varieties, but you should not buy too cheap types, as their quality leaves much to be desired.
  • Roofing material, there are also a lot of them, but, as practice shows, the best solution in terms of price-quality ratio is soft roof, which has a wide selection of colors and patterns of the roof.
  • Materials for the foundation, which is most often tape.

We have considered a fairly convenient and functional design of a 6x6 log bath, but, in some cases, when the bath is located on a separate area or you need a lot of space, you can consider a larger area. If the site is small and space is limited, the best option would be to build a bathhouse with an attic floor.

Two storey layout

This option has gained wide popularity due to the fact that the building occupies a small space, which is important for small areas, but at the same time, the presence of an attic floor almost doubles the usable area.

Let's consider a very interesting and functional project of a 6x6 log bath with an attic floor.

Functionality of the 1st floor

Everything here is very functional:

  • A spacious terrace 6x1.5 will allow you to sit in the warm season and spend time on fresh air with maximum comfort.
  • On the ground floor there is a huge recreation room with an area of ​​more than 16 m 2, in which even the largest company can comfortably accommodate, from this room you can go to the washing room, or you can climb the stairs to the 2nd floor.
  • The washing room is not very large, but it has enough space to install a shower cabin or other equipment.
  • The steam room, of course, is the main room, the area is not very large, but 3-4 people can easily fit in it.

Arrangement of the 2nd floor

The room on the second floor has an area of ​​​​almost 20 m 2, which allows you to place in it a lot of sleeping places, as well as equip a gym, install a billiard or tennis table, or make a large game room. The area allows you to realize many options, some even divide it into two rooms and equip guest bedrooms.

In addition, there is a terrace-sized balcony on the top floor, where you can relax and watch the sunset in a rocking chair.

Tip: as practice shows, a table tennis or billiard table is the most popular type of pastime in the bath.

Other options for two-story buildings

Naturally, 6 by 6 log bath projects are not limited to these two options and can vary in many ways. various options layouts and layouts, the main factors are your preferences and the price you are willing to pay, because the cost can vary very much (

PROJECT B-560-1: basic model of a 6x5 log cabin, "STANDARD"

Price 217,000 rubles.

reference Information: the price of a log cabin of a bath 5 * 6 set "ECONOMY" 205,000 rubles; set "STANDARD +" 236,000 rubles.

Economy : log house baths from a log of manual felling, for shrinkage. Size 5x6 m, final height during assembly from the floor log to the ceiling beams 215-220 cm. The set includes a five-wall frame, processing a log for a staple, cutting corners into a paw, inside a semi-carriage (partition of a log - carriage), floor and ceiling logs beams from a log prepared for striping floors and ceilings (aligned horizontally). Insulation moss or tow. Delivery and assembly are included in the price.

Description of the log house project 6x5 in the configuration "Standard" : in addition to the “Economy” configuration, draft floors are hemmed, a roof is installed. Attic space above the log cabin of the bath with a ridge height of 190-200 cm ( rafter system from thin logs, lathing from unedged board, covering with a temporary roof - roofing material, the gables of the attic are sewn up with clapboard).

Description of the bath project 5x6 in the configuration "Standard+" : in addition to the “Standard” configuration, floor beams are cut to size and finished floors are hemmed from a tongue-and-groove planed board 36-38 mm thick. We recommend to hem the finished floor front side down so that during shrinkage it is possible to use the log house as a service room and not damage the floor board. During the shrinkage of the log house, the floors dry out and when finishing the bath, they require constriction. Finishing ceilings from lining 16-18 mm thick are hemmed along the beams.

Any intermediate configuration is possible, as well as additional options (euro-slate or metal roof tiles, strip foundation, pile-screw foundation, bored foundation, cutting "into a bowl", etc.)

Prices for the most common accessories log cabin baths 6 to 5

  • Additional crown (makes the frame 20 cm higher): 15 000 rub.
  • Strapping from a round log or from a bar with a log cut for installing a log house on screw piles: 20 000 rub.
  • Processing the log cabin of the bath from the outside under the planer: 12 000 rub.
  • Production of an attic floor under a gable roof (ridge height 320-330 cm) with room framing: 27 000 rub.
  • Production of an attic floor under a sloping roof with room framing: 32 000 rub.
  • Veranda 6x2 along the long side of the log house with an increase in the roof over the veranda, the pediment towards the veranda: 21,000 (Standard) / 24,000 (Standard+) rub.
Bath size Additional crown + 20 cm height Strapping crown on piles Cutting the lag into the harness Planer processing broken roof Veranda 5x2 m Pile-screw foundation
log house 5x6 13000 rub. 13000 rub. 5000 rub. 10000 rub. 30000 rub. 22000 rub. from 35200 rub.

Project B-560-1, classic wooden bath 5x6 with a gable attic roof

Log cabin baths 6x5, standard sizes
Log cabin baths 5x6, view from the pediment
Log cabin baths 6 * 5, side view of the building
Log cabin baths 5 * 6, layout option

to enlarge a photo or a project of a 6 * 5 log cabin, click on the image

* Payment produced in two stages: 60-70% of the cost for the supply of a log house to the construction site, 30-40% of the cost after acceptance of the finished building. If the delivery is delayed by more than 15 days from the date of placing the order, it is possible to make an advance payment, the amount of which depends on the time of the delay in delivery (for example, when ordering a sauna in January with delivery in May, the prepayment will be 15% of the total cost of the log house).

** Foundation cost on the basis of screw piles is not included in the cost of the log cabin of the bathhouse and is calculated separately, depending on the distance from the Moscow Ring Road, the presence or absence of a slope in the building spot and other factors.

*** Delivery of the log cabin: up to 80 km from the Moscow Ring Road (for Moscow) and 50 km from the Ring Road (for St. Petersburg), as well as to Smolensk, Pskov, Kaluga, partly Tula and partly Tver regions are included in the price. Other regions - depending on the popularity of the region (usually we carry two baths per flight, but delivery of one log house is possible), direction and distance from our production base in the village. Usvyaty of the Pskov region.

Log cabin baths 5x6 (bath from logs hand-cut): description

The log cabin of the bath 5x6 meters is one of the least in demand. A bath of this size is ordered during the construction season a single number of times, probably 15-20 times less often than log cabins 6x4 or 5x3 meters. This fact must be explained psychologically rather than technically. The fact is that the traditional length of sawn timber, both logs in the workpiece and edged (beam, board) is 6 meters. The equipment is set up for this length, trucks transporting lumber have a multiple of 6 meters in length. Therefore, when building baths and houses made of wood, people are guided by the size of 6 meters. Accordingly, they either build a log cabin of a bath 6x6 meters, or obviously less, 3x4, 5x3, 6x4, etc.

We have the opportunity to cut the log cabins of baths directly on the logging plots, therefore we are not limited to a length of 6 meters, neither up nor down. When cutting a 6x5 log house, we do not have log tails a meter long and we do not write them off as consumables. Therefore, a log cabin of a 5x6 bath costs exactly as much as a log cabin with internal dimension 30 square meters. The cost of a log house is calculated, first of all, based on its quadrature. If we compare the price square meter area, then for a log house 5x6 it is the same as for a log house 6x6 or 6x4.

Opportunities interior layout log cabin baths 5x6 meters is one of the most convenient. If you install the inner fifth wall so that it divides the space into rectangles of 4x5 and 2x5 meters (in fact, you need to move the wall so that 2 meters remain after finishing the steam room, that is, the rough width of the room is 210-215 cm), you get a comfortable a relaxation room, a large steam room, a separate toilet and a separate shower compartment. The entrance to the log house in this case is done directly into the rest room. If it is necessary to use the log cabin of the bathhouse in winter as a living space, we recommend combining a toilet and a shower, and instead of a separate bathroom, make a dressing room that cuts off cold air at the entrance to the bath.

As standard, the log cabin of a 5x6 bath, as well as log cabins of other sizes, is installed on a columnar foundation of solid sand concrete blocks 20x20x40 cm. However, in practice recent years, especially after the flood in the spring of 2013, for large log cabins, we cannot unequivocally recommend installing a sauna on posts. The foundation based on screw piles is optimal in terms of price and quality. You can learn more about this type of foundations on the specialized website of the company, which is our structural unit. The recommended mounting scheme for screw piles and accessories (heads, channel bars) under the log cabin of a 6x5 bath is presented on the page dedicated to screw pile foundations.

Bath 6x5 is convenient for simultaneous use by a company of 3-5 people. A large room rest leaves space for setting a table, sofa, TV, etc. At the same time, the dimensions of the rest room do not “infringe” on the steam room, where the L-shaped design of the beds fits with the ability to accommodate two people lying on the upper tier at once. The maximum number of "sitting" places with this arrangement of beds is three, plus one separate "recumbent".

It is believed that log baths are the best, because the tree can breathe, due to which there is a natural regulation of humidity and temperature. But in relation to baths, these, and some other properties of wood, create quite a few problems.

There is an opinion that a log house from a log costs less than the same from a profiled beam (it is better processed than a regular beam and has locks that reduce the risk of cracks). If you look at the cost of one cubic meter of material, then this is true. But after all, logs for the same project will need much more than timber. If you take a beam of 200 mm, then the thickness of the wall will be 200 mm, and the height of the crown will be 200 mm. And if you take logs with a diameter of 200 mm, then a groove 10-12 cm wide is selected in it. And the thickness of the wall at the junction of two logs will be these 10-12 cm. And the height of the crown will not be 200 mm, but 100-120 mm. From here comes the difference in the required volumes during the purchase. Add more laboriousness of work and it will immediately become clear why log cabins from a bar are still more often installed. If we talk about, then in it the dimensions should match to within a few millimeters. With such material, work progresses quickly: only the bowls are cut (most often with a chain saw), the insulation is laid and a new crown is placed.

When erecting a log house, a longitudinal groove is cut in a log in order to “join” it with another

Another important fact: it is easier to work with a bar. Especially with profiled. It has exactly the same dimensions (if made with high quality) and folds one with the other without problems. And with a log, if it is not rounded, fuss is more than enough.

Log processing

First of all, you need to know that a log house made of logs or timber (except glued) must be settled under the roof for at least 8 of the driest months. More often they put a bath in December, Finishing work start in August. But only if these are really dry months and they are in a hurry to start a bathhouse. If there is no hurry, it is better to wait one and a half to two years.


Work and at the time of drying will be enough. After installation, the logs must be treated with solvent-based antiseptics. For example, Tikkuril has, Teknos has Woodex Base. They will protect the wood from fungi and blueing. The ends of the logs, so that they are not torn apart during drying, are smeared with another composition from the same Teknos or its analogue.


After the wood dries, the log is sanded, removing the bacterial treatment. This operation opens the pores of the wood, allowing it to be painted over with high quality. For coloring the log house, oil-wax is used more often. These products also have a coloring pigment in their composition, which gives a shade to the wood. Therefore, in addition to protective properties, they also perform a decorative function.


Crack sealing

It's no secret that even in a well-made log house there will be gaps: it is impossible to cut down the bowl so that it perfectly repeats the shape of the log. Still, some gaps remain. Moreover, in the process of shrinkage, they increase, and cracks appear and deepen.

All these cracks close up - caulk. Use for this tool, similar to a small flat spatula and a hammer. Moss or tow is placed in the cracks. Tow is filled with caulk into the slot, compacting by tapping on the handle.


If the frame was assembled on moss (dried moss is laid out between the crowns for compaction), then its ends hang from the cracks. To prevent birds from stealing it, it is tucked inside immediately after installation. It is not necessary to strongly compact and zealous. The task of this processing is only to remove the hanging ends. Caulking itself is carried out later - after six to seven months.

If the log house is placed on a jute tape or tow, the first caulking is carried out after the initial shrinkage of the log house - after six months. After that, you can install windows and doors in the log house. A secondary caulk will be needed in about a year. It usually requires less time and materials than the first time.

In general, as they say, a log house "leads" all his life. Therefore, periodically it needs to be inspected and the gaps sealed. In addition to the fact that the old ones are getting wider, the tow is taken away to the bird's nests. You have to periodically update the finish. But this is in the event that the log house is not finished with anything on the outside.


Features of construction and operation

Quite a few problems arise for the owners of wooden baths during operation: high humidity stimulates the development of various sores and fungi. Few agree to process wood with some potent chemicals: at the same time, you can process yourself. Therefore, even during construction, it is necessary to take all possible measures to ensure good ventilation:


In addition, after each visit to the bath, it is necessary to create conditions for drying the entire room. It is not difficult to do this: after soaring, throw a bunch of firewood into the stove and open the windows and doors. Additional heat coupled with a draft will dry the bath well.

There is a wooden bath and another enemy: woodworms. If in the washing and rest room the lining is most often treated from these pests with impregnations, then in the steam room they prefer to put it “as is”. If steamed at temperatures above 60°C, the larvae do not survive and there are no problems. But the Russian steam room provides for temperatures below this threshold. Then, if you notice traces of woodworms in the sheathing or on the shelf, you need to fry them. Heat the bath “dry”, and raise the temperature to at least 80-90 ° C and hold it for at least an hour or two. It is necessary to ensure that the inside of the wood is warmer than 60°C. Then there is a chance to get rid of both adults and larvae without harming the wood.


If the problems are still local - there are few places where the larvae come out, you can get by with little blood: warm up the places of damage. You can do this with a hair dryer. Just do not set a high temperature - no higher than 150 ° C - even without charring, the wood can get a thermal burn, and then it will quickly collapse. And you won't understand why. So, set the temperature and warm up the exit points of the beetles (holes) and the surrounding areas.

Bath preparation time

The features and complexity of construction are not all the "pitfalls". Baths made of logs (and timber too) need to be heated longer than aerated concrete. The point is the high heat capacity of wood. Until it warms up, the air will not start to heat up. But the radiant heat emanating from the heated walls is much more pleasant in sensations and is better perceived by our body, warming it to a greater depth.

But the fact remains: to prepare a steam room in wooden bath it will take more time and firewood (ceteris paribus). If we talk about the bath from the log in which it stands, then the preparation time generally takes at least 3-5 hours. Sometimes more, sometimes less - depends on the wood, design and power of the stove. Moreover, in order for the temperature background to even out, several more hours must pass after the desired degree of heating is reached. The owners of such baths even have a special term: the bath stands. The total preparation time is 6-8 hours. Few of the townspeople have such a supply of time (and patience).


One point: in such baths there is usually no special insulation of the walls of the steam room. The ceiling can still be insulated, and even then, rather folk methods- clay, sawdust, expanded clay. To warm up such a steam room with a metal stove, it must be taken with a good supply of power. But then it's hard to keep the temperature within the limits of the Russian bath conditions - at the level of 50-60°C.

Natural wood has long been considered the most popular building material. Baths were also made from it. Now timber buildings are still popular. There are many interesting projects steam rooms made of timber, which will find a place both on a rural plot and next to a luxurious cottage.

Peculiarities

Wooden log cabin projects have many advantages and disadvantages.

pros

First of all, it is worth noting the advantages of log buildings:

  • Designs from natural wood enjoy their environmental friendliness. This material is completely safe for health, thanks to the use of which an ideal microclimate is created in the room. Even the products that are used to impregnate and protect the facade are non-toxic.
  • Wood is an excellent basis for walls also because this material retains heat well in the room. Thanks to this, a fairly comfortable microclimate is created inside the bath.

  • wooden walls not only retain heat inside, but also have good soundproofing properties. Here comes the air natural wood passes, so it is easy to breathe in such a room.
  • Also pleased with the fact that the building is strong and durable. Especially if you additionally cover the material protective equipment like varnish and special impregnations.
  • The last plus is the ability to create truly unique and original buildings. The tree is easy to process and polish. In addition, it can be decorated with exquisite carvings. This can be done even with your own hands, without seeking help from professionals.

Minuses

As for the disadvantages of log baths, there are also enough of them:

In general, despite all the existing disadvantages, wood is very good material to build a bath. If you follow all the safety rules and listen to the advice of professionals, you can get a reliable and luxurious building that will delight you with its appearance and quality for a long time.

Types of buildings

There are many ideas that can be used when building baths. Home steam rooms differ not only in their design, but also in size. Before building the bath itself, you need to calculate everything on paper and make the necessary drawings.

classical

The standard option is a 6x8 bath. Such a building is quite large, so it has enough space not only for the steam room itself, but also for a dressing room in which you can place a dressing room or a place to relax. One-story baths of this type are a real Russian classic. They have enough space for both family gatherings and for relaxing with friends.

Building with an attic

If there is not so much space in the yard, then you can build a two-story building, or at least add an attic to the room. This solution is suitable if a very small bath is planned, 3x3, 3x5 or 3x4 in size.. As a rule, if a building with an attic is being built, then there is a steam room on the first floor, and a relaxation room on the second floor, in which several people can comfortably accommodate.

In some cases, the attic can be equipped with a billiard room or, for example, a place to watch your favorite sports programs on the big screen. This is very convenient, since the relaxation room will be located separately from the stuffy steam room. In some cases, you can even make a separate entrance to the attic by attaching a convenient staircase to the side.

with terrace

A bath with an additional terrace is just as good as a house with a veranda. Such a room can be built from scratch, and a terrace can be attached to it when the bath is ready. This option is suitable both for very small buildings measuring 3x6 or 3x5, and for more spacious ones, for example, 6x6.

On the terrace you can put sun loungers, folding chairs or a table surrounded by log benches.

By the way, the terrace itself also performs a decorative function. Especially if it is surrounded by a decorative fence.

large building

If there is a lot of free space on the territory of the yard, then it is possible to build a truly luxurious large building from a calibrated timber. Designing such a building will take a lot of time, because you don’t want to waste free meters for nothing.

A bath measuring 8 by 8 or more allows you to apply many different arrangement ideas. There is enough space for a steam room, and for a dressing room with a place to store firewood, and for a shower room with a toilet, and even for a guest room. In this case, you don’t even need to make 2 floors - there will be enough space for everything.

Next to such a building, as well as near buildings 4x4, 4x6 or 5x5 in size, you can place a pool. Even a small reservoir is enough to cool down a little after the bath and relax. There are both round pools and rectangular or even corner ones.

From a log, you can make both standard buildings sized 4 by 6, 6x4, or 4x5, as well as more original buildings. Even the best ready-made ideas can always be supplemented with something of your own, bringing a twist to a standard project. When designing a room, you definitely need to take into account all the features of the landscape, as well as how many people will relax in this room.

materials

To build baths suburban area can be used different materials. For those who do not understand the topic of construction at all, it is better to entrust this process to professionals. Builders will select the ideal material that will withstand both weather conditions and high humidity.

Foundation

Before choosing the material that is used to build the walls, it is worth choosing a quality foundation. This is a very important step, because the wood can shrink, and to prevent this from happening, you need to strengthen the base.

The strip foundation is best suited for classic baths. It is both easy to make and cheap. Therefore, the construction of a bath when choosing such a foundation is many times cheaper, and even non-professionals can cope with pouring it.

Wood

To build the base of the bath, you need to choose very quality wood. This is one of the most important stages, because it depends on the selected logs appearance the buildings. Wood for a bath must be chosen very high quality and devoid of any defects. There should be no cracks or damage, or any colored spots.

Before starting the construction process, the material must be thoroughly dried.. It is quite simple to do this - just put the logs in the yard and hold them on outdoors. After that, their surface of the cylindrical beam must be processed by special means protecting the tree from fire, decay and pests. Without this, the building will not last long.

To build a bath from rounded timber, you need to choose the right type of wood. Experts say that fragrant pine logs are best suited for log cabins. In this case, preference should be given to trees cut down cold winter. This is what makes wood resistant to moisture. Chopped larches, spruces or cedars are also suitable.

Interior

There are many interesting ideas on the design of the interior of the bath and its external decoration. To begin with, it is worth paying attention to the features of the characteristics of each of the style directions, and then decide which one is most suitable for your bath.

Russian

One of the most popular finishing options is a bathhouse in the traditional Russian style. On the one hand, the interior of such a room can be really simple, and on the other hand, it can be really luxurious. It all depends on the choice of materials and decorative details.

The log walls and wooden floor already look very good on their own. Therefore, no additional finishing is needed. Furniture will decorate the room. She will find a place in the rest room and in the dressing room. Russian-style furniture is wooden benches, tables and chairs, decorated with exquisite carvings, or simply knocked down from boards.

In the washroom there is also a place for Russian-style decor - a watering can used instead of a classic shower, or an original wicker rug. You can experiment with decor in the lounge or guest room. Here you can put a large table covered with an embroidered tablecloth, put luxurious services or old samovars on the shelves.

As a decor, you can use all kinds of lamps. Metal or bronze lamps look best in a Russian-style bath. Such a source of live fire as a real Russian stove would also be appropriate. It can be additionally painted with bright colors or painted in a traditional style.

In such a building there is a place for the original pool. The reservoir described in old Russian fairy tales is a combination of contrasts. Two round mini-pools are filled with water: one is warm, and the second is icy. Not the fact that bathing in it will have a rejuvenating effect, but it will definitely heal and cheer you up.

Rustic

This interior decoration option is similar to the previous one. But here everything is much simpler. There is no artificial gilding and luxurious decor. Everything is done as simply as possible - the wooden base is complemented by handmade jewelry.

Anything can act as a decor here - from a simple birch broom to a wooden tub or mugs. All kinds of wicker napkins, rugs and other textile products that will fill the room with comfort will also come in handy. And here all kinds of frills will obviously be superfluous. This applies to forged decorative details, and modern jewelry.

Modern

If the option with a traditional Russian or a simple village bath seems too boring, then you can choose something more modern to decorate the room. For example, a bright bathhouse made of high-quality logs, decorated with LEDs around the entire perimeter of the room.

In a modern steam room, it is worth putting not a huge heater, but a metal stove, for example. Furniture can be selected multifunctional and practical. In log baths modern style you can experiment a little with the layout, trying new unusual ideas. A dressing room, for example, can be taken under a stylish locker room, and a washing room can be supplemented with a bathroom.

To decorate the rest room, you can choose all sorts of little things that evoke associations with the sea: shells, starfish, pebbles that cover the floor.

Generally interior decoration baths, of course, are less luxurious than the design of a residential building. But nothing prevents you from decorating this place for relaxation at your own discretion, changing the style and atmosphere.

photos

Exterior finish

Specialize in exterior trim log baths are not worth it. The round log house itself looks very concise. Therefore, all that needs to be done is to cover the logs with a protective layer of varnish or antiseptics. This will slightly decorate the wood, making its texture more expressive and, of course, extending the life of the building.

In some cases, the room is also additionally insulated so that you can steam even in severe frosts.

exterior finish baths are recommended to start not immediately after the construction of the bath. It is worth waiting a certain time for the tree to sit well. After a couple of weeks, you can already mount the windows. A wall decor and insulation should be started only a year or even two after construction. So you can be sure that the tree will not “float”, and the design will remain beautiful for many years.

The facade of the timber must be covered with a high-quality composition, which in the future will prevent the reproduction of all kinds of insects or any other microorganisms inside the tree. Properly selected products, by the way, also decorate the base of the bath, emphasizing the wood fibers. To protect the log house from rapid aging and decay, such methods of working with wood as grinding and caulking are also used.


Useful tips for everything

© Copyright 2023,
sued.ru -Useful tips about everything in the world

  • Categories
  • Milling machines
  • Machine tools
  • Air preparation
  • Forging machines
  • Milling machines
  • Machine tools
  • Air preparation
  • Forging machines
  • Other
  • About the site
  • Site Map
  • Contacts
  • Advertising