Projects of houses of baths 6 7 meters. Choice of interior layout

In 2018 they built a house for me, according to my project, by professionals in their field. The project itself is somewhat more expensive in comparison with competitors, but in our village they built another house and the owners were satisfied.

We ordered the construction of a bathhouse, coped with it in the shortest possible time, without any complaints about the work of the brigade.

The full cycle from the production of material to the assembly of the house is perfectly organized. Quality, professionalism at the highest level... Recommend.

It is very important to find your own manager who will advise not only when concluding a contract, but also during construction. We talked with Igor, in the end the bathhouse is ready on the site, we are using it, everything is fine. Thank you.

Great homes, great service! They told everything, helped with the choice. You can see everything alive - we went to a facility under construction, roughly similar to ours, where they saw how they work, only after that they decided to build. Thanks for the patience of the managers and builders for answering all the questions!

In 2018, they ordered a bathhouse. We are very pleased with the work of the employees of this company. Starting with an estimate and ending with a team of builders. We were lucky with the action, we received a stove-heater for a bath as a gift!

Thank you for the sauna house. On the site, some prices are indicated, but in fact there are more. But it is understandable that the price is indicated for the very minimum, like everyone else on the Internet, if you want with comfort, pay extra for special stages. In general, "thank you" to the builders.

Baths 6 to 7- the gold standard for suburban construction. Such a bath gives all the possibilities for comfortable rest, while quietly fits into a site with a complex landscape or a large number of outbuildings. The bathhouse can be used not only for recreation: projects with an attic are suitable for short-term living, equipping a workshop or playroom, storing things and garden tools.

The advantages of a bath 6 to 7

• All the necessary premises under one roof. Sauna projects include a steam room, a washing room, a bathroom, a recreation room, a vestibule, and sometimes an open terrace or a kitchen area.
• Compact size. A 6 by 7 bath can be built on plots of 6-12 acres. If you need more space, look at projects with an attic or second floor.
• Short construction time. A compact bath from a bar does not require a capital foundation - screw or reinforced concrete piles are enough, which are mounted in one day. Masters " Timber technologies»A bath of this size is assembled in 1 week.

When choosing a project, the area of ​​the site and the number of people who will use the bath are important. The steam room is usually made small, since it is easier to warm up a compact room. Most of the building is dedicated to the recreation room, where the whole company usually gathers. If you plan to have a rest in winter, provide a warm vestibule and a bathroom; a spacious outdoor terrace will come in handy for a summer vacation.

Construction of a bathhouse 6 by 7 with "Brusovy technologies"

We build saunas according to standard and individual projects. Any of standard projects presented in the catalog can be processed according to the requirements of the customer. For those who need an exclusive, we provide an individual design service. Send photos, drawings, planning ideas, the in-house architect will develop a project based on them in 1-2 days.

The construction of a 6 by 7 bath from a bar takes up to 2 weeks. A team of carpenters assembles them from prepared turnkey or shrinkage lumber.

The cost of each bath is indicated in the description. It includes the project, lumber, assembly on site. You can get detailed advice on the timing and cost of construction by phone.

Before the construction of a house or other object, a project is prepared in order to coordinate actions, calculate the material and reduce the cost of deliveries. The article describes a 7 by 7 bath and provides drawings with other dimensions. The advantages and disadvantages of layouts are discussed, Construction Materials and finishing methods.

Sauna 7 to 7

Above is the project of a 7 by 7 bath, which is placed in the corner of the site, which allows rational use of the territory, since part of the building is sloped. Two windows in the break room increase the amount of natural light, which is important for saving electricity. In the steam room, windows are not provided to isolate the room from heat loss. For the same purpose, there is only an exit from the washroom to the living room. A tambour with an area of ​​2.2 m 2 is enough for outerwear and storage solid fuel... As an air buffer, it prevents cold air from entering.

The layout of this 7 × 7 bath differs from the previous one. It is placed in any part of the territory near country house... Allocate space for a terrace with an area of ​​30 m2. The latter is used to rest on fresh air... The surface is raised on a columnar foundation so that it is not flooded with rain and the supports are ventilated from below. The relaxation room in the bath is divided into functional areas: a dining room and a kitchen. The stove is located in the bath between the steam room and the furnace. The advantage of the solution is that there is no waste from firewood, the disadvantage is that you need to go to the furnace across the street to add fuel.

In this sauna project, the steam room is designed for the simultaneous stay of 4 people. There is a small window for ventilation and natural light. The tambour serves as a hallway and is a transitional zone between the entrance, the recreation room and small terrace... The steam room is heated from the living room. The walls are insulated with basalt wool and a heating system is installed, since there will be heat losses from the windows. The bathhouse is erected from bricks or rounded logs.

Sauna 7 to 5

Baths are 7 by 5 smaller than the previous version, but the necessary rooms are placed on this area without sacrificing convenience. The option shown above is erected from brick or foam block. The latter is insulated outside mineral wool after fixing the waterproofing. Inside the bathhouse, it is covered with vapor barrier and finishing. Ventilation is installed in order to timely remove moisture that is absorbed into the pores of the foam blocks. The entrance to the bathhouse is through the terrace, which is convenient when visiting in rainy weather. In this case, dirty shoes are left under the canopy. The space is divided into two parts. The rest room is a buffer between the cold air from the outside and the hot air in the steam room.

Part of the useful area of ​​the bath project is allocated for open terrace... Because of this, they donated the vestibule, which is important for creating an air barrier. 15 m 2 are allocated for the recreation room. It can be divided with plasterboard partitions to organize the kitchen and turn the bath into a living room. The steam room can be attended by 6–8 people at the same time. If a building of this size is erected from bricks, then they do it on strip foundation buried below the freezing point.

The bath project shown above is implemented by the frame method on a pile foundation. The structure has a gable roof with an attic underneath. Exit to it through the recreation room, where the stairs are shifted to the corner so as not to take up space. If you use the screw version, you can save 1.5–2 m 2. The terrace is made open or closed. The second option has the advantage, since it can be used in bad weather, and the board will last longer without getting wet. The bathroom is separated from the washing room and is displaced towards the exit, therefore it provides an air gap with the steam room wall.

The emphasis in this project is on open space. Part of the usable area is given over to the terrace, which bends around the bathhouse on both sides. The territory is fenced with a decorative fence and has supporting elements, so a cover can be installed.

Sauna project 4 by 7

Baths with a size of 4 by 7 are placed in long, but narrow areas. The option shown above is assembled from a log house, therefore, a shallow or columnar belt is used as the foundation. After assembling the boxes, they wait a year until finishing... This is necessary for the shrinkage of the bath building. The rest room is isolated from the steam washroom. The firebox from the stove goes into the last one, which is convenient for keeping clean, but inconvenient for laying firewood. The room is planned in the proposed way or installed in a far corner from the entrance Kitchen Area, and opposite place furniture and a table.

Compact sauna with separate bathroom and a washing room. This is convenient if the bathhouse is attended by more than 4 people. The rest room is isolated from wet rooms, so the firebox is placed in the washing room or in the hall, which, warming up, does not blow out the warm air from the living room and shower room. As an option for redevelopment, they combine a shower and a bathroom, reduce the hall and expand the steam room, which will allow 7-8 people to be in it at the same time.

The bath project is interesting for the presence of a bay window. The latter visually expands the recreation room due to sunlight that enters the room through three windows. The walls are erected from a brick or block, since the timber will require cutting and docking at an angle, which will complicate the task. The water in the washing room is heated from the stove, so the boiler is installed if the bath is used as a guest house.

The variant is notable for the division of the internal space into three parts. The side ones are equal in width, the rest room is larger in area. Part of it is reserved for a covered terrace, which can be turned into a closed room and combined with the living room. The shelves in the steam room are mounted in two rows to increase convenience in levels. The washing room and steam room do not have windows, which reduces heat loss.

Sauna project 6x7

The interior layout in such a bath project is thought out by cutting off cold air from the street. This was achieved not by the diagonal location of the entrance to the steam room, but on the same line. Due to this, the circulation of air masses is hindered. The fuel is loaded into the furnace from a washing room or a rest room. The way the shops are placed depends on this. The terrace is used as a buffer zone in front of the entrance, since it is narrow for outdoor recreation.

The 6 by 7 bath, shown above, stands out for its versatility. The latter is manifested in the balance of the area of ​​the internal premises and the terrace. The veranda is under the same roof as the building, which is important in bad weather. The entrance to it is organized from two sides, which is convenient if there is a pond for swimming after a steam room on one side.

Sauna 7 to 7 with an attic

The advantage of a bath with an attic is the placement of bedrooms or lounges on the second floor. In this case, the steam room and shower room are expanded, which is not combined with a bathroom. Shown above is a project built from a rounded beam. The staircase is located in the hallway, which does not take away the useful area of ​​the living room. The second floor is divided in half with the installation of a partition or left solid for the gym and the billiard table.

In this project, a 7 by 7 bathhouse with an attic is the kitchen area. The premises are combined with a recreation room, which does not create inconveniences, since there is a staircase on the border that leads to the second floor. The entrance hall is a buffer zone that separates the living room from the entrance. The attic is divided into two equal bedrooms with a corridor in the middle. The disadvantage is the lack of a second bathroom. The useful area of ​​the second floor in the bathhouse is less than the first one due to the roof slopes.

Sauna 6 to 7 with an attic

An interesting project of a bathhouse 6 by 7 with an attic. The first floor has a bay window that expands the recreation area. If the building is used as a guest house, then an office is placed in the ledge. The exit to the second floor is shifted to a corner and not separated on the second floor, which creates a single bedroom space. The stove in the steam room is installed in a partition with a relaxation room. The project is being built from foam blocks or bricks. The foundation is strengthened due to the weight of the walls and the increase in the load from the second level. Roofing system - hip or kinked.

A simple project of a bathhouse with an attic, allowing for redevelopment. The partitions are made of plasterboard, and the load-bearing walls are erected from a foam block. The gable roof reduces the area of ​​the second level. There are two terraces that can be used independently. The rest room on the ground floor is divided into two parts, so one of them is set aside for the kitchen. Another option is to expand the steam room in the bath into the washing area, and move the living room into one room.

In this project of a bath with an attic, the same area is allocated for the entrance hall as for the rest room. This can be allowed, since the former is used for storing firewood and as a furnace. There is also an exit to the second floor. The bathroom is separated from the washing room and the premises are located on the sides of the steam room. The solution creates protection on three sides, which reduces the consumption of firewood for heating. Only one wall faces the street. The width of the terrace in front of the entrance is sufficient for installing armchairs in the corners.

Conclusion

The 7 to 7 bath is not the only project that is being implemented at summer cottage... For a rectangular one, options 4 by 7 and 7 by 5 are suitable. Rounded timber, brick or gas-filled blocks are used as the main material. On difficult soils they are erecting frame baths that do not lose in thermal insulation, but win in the speed of construction and maintenance. To expand the usable area, the attic space is converted into an attic. Pay attention to the warming of the planes. An additional layer of vapor barrier is placed in the steam room and ventilation is installed to remove moisture after use. Some ideas for projects can be gleaned from the video below.

You have decided to make your dream come true and finally build a bathhouse on your site - pay attention to the projects of baths 6 by 7 (6x7) meters in the DK-Dom Design Workshop. Our company is engaged in the creation and development of projects of houses and baths from a log house, rounded logs, glued and profiled beams. Building a wooden bathhouse on the site is a great opportunity to spend time with friends, improve your health, and just relax and gain strength.

Features of designing a bath 6 by 7 (6x7) meters

Wooden bath 6 by 7 (6x7) meters has become an excellent solution for those land owners who have already built their own bath. They appreciated the spaciousness and functionality, because 42 sq. m. you can safely place all the necessary premises for high-quality bath procedures. In addition to the main ones: a dressing room, a washing room with a bathroom. knot, steam room. You can plan additional room for a plunge pool or plunge pool, or a billiards room.

The layout of the premises is developed based on the wishes of the customer. The traditional solution is the design of three spacious rooms: a dressing room, a washing room and the steam room itself. And not traditionally, you can develop a layout based on the individual wishes of the customer, for example, you can differentiate the washing room into a free-standing shower cabin and places with pedestals on which you can place basins and other bath accessories.

Designing a 6 by 7 (6x7) meter bath has a number of positive aspects:

• It is possible to design a spacious washing room where several people can wash without problems at the same time;
• A spacious lounge can be divided into sections, for example, in one part you can install a comfortable sofa and a TV, and in the other part you can place furniture with a large table;
• Dimensions 6 by 7 (6x7) meters will allow you to build a second or attic floor, while creating more space for a pleasant pastime;

The project of a bathhouse 6 by 7 (6x7) meters with an attic from the design workshop "DK-Dom"

Considering the dimensions of the structure 6 by 7 (6x7) meters, the design of the upper one becomes possible and preferred among connoisseurs of real rest. Project wooden bath 6 by 7 (6x7) meters with an attic will be a compact, reliable and safe structure for large family or big company friends. On the upper floor, you can organize a relaxation room with comfortable furniture with access to the veranda, where it will be convenient for you to relax in the fresh air with refreshing drinks or hot tea.