Homemade for the home workshop. What are homemade machines and fixtures? Self-made for the home workshop

16.06.2019

Crafts made from old items and things that can be given a second life can make your home much more comfortable. Some do-it-yourself homemade crafts for the household can significantly save the home budget, make work easier, or make the surrounding interior more interesting. And even if difficulties arise in the process, overcoming them will be worth it.

DIY for the home workshop

In almost any home there is always some set of tools necessary for the household. But sometimes situations arise when working in your own workshop or garage requires some kind of device that is either impossible to purchase in a store or is very expensive. In this case, the way out can be found by making it yourself.

Blacksmith's forge from a cylinder

This device for heating metal will become indispensable assistant in the home workshop. The forge can be safely used to make original items using artistic forging. These will be truly unique forged items.

For the bugle, it is best to use an empty gas cylinder with a capacity of 25 liters. Its ends are cut off by a grinder, and the hearth door and its back will be made from the cut parts. Inner part the cylinder is covered with refractory ceramic wool, which is able to withstand temperatures of more than 1200 0 C. From above it is coated with fireclay (lined), which can withstand temperatures up to 1500 0 C. Fireclay slabs or refractory bricks are laid on the bottom of the hearth after lining.

A hole is drilled from above and a small drive is inserted, allowing you to insert the nozzle of a gas-powered burner, which can create a temperature in the hearth of more than 1000 0 C - quite sufficient to heat the metal to certain temperature suitable for forging.

Collapsible garage crane beam

In the manufacture of such a lift, the cash costs will be much less than buying a factory model. For its manufacture, you will have to spend money only on materials, half of which, perhaps, can be found in the garage.

Materials needed to assemble the lift:

two racks - profile pipe 100x100x2350.
Cross bar - steel pipe arbitrary length with a diameter of 100 mm.
Four supports for the rod - profile pipe 100x100x600.
The basis and braces - a corner with regiments on 100 mm.
Two metal rollers for the cable.
Four wheels for movement.

For the lifting mechanism, it is best to use a hand winch with a worm gear with a maximum load of up to 500 kg, which is attached to one of the racks of the crane beam.

The design does not take up much space in the workshop, moves easily on hard surfaces and is quite convenient for removing the engine from the car.

Mobile tool rack

The main highlight of this rack is its small size , but at the same time it is possible to place a large number of tools, and if necessary - quickly move it to any place or adjacent room. It is very convenient to use such a rack in your workshop or when conducting construction and repair work in large rooms, especially when you need to frequently move tools.

The rack can be assembled on the basis of a collapsible plastic rack mounted on a self-made platform with wheels (trolley). The platform is made exactly to the dimensions of the rack from metal corner with shelves 45x45 mm or a sheet of plywood with a thickness of at least 10 mm. For movement, furniture metal wheels are used.

It is additionally possible to manufacture and fix fasteners for the rack building levels, extension cords and other tools that can be stored hanging.

Help for the hostess

There is not always a financial opportunity to buy, for example, something from new furniture in a furniture store or place an order for its manufacture. But you can always get out of this situation by making the right thing with your own hands, while making it attractive and unique, using improvised means for this.

Cork kitchen apron

A kitchen apron is a wall surface located between the countertop and wall cabinets. Usually this part of the wall is lined with tiles. But many other materials can be used to cover it, for example, wine corks can be glued to the wall.

Such an exclusive decor looks quite great.

Before sticking, each cork is cut lengthwise into two halves with a sharp clerical knife. It is desirable to paint the wall black, which will emphasize the seams between the plugs.

Corks are glued to the wall with liquid nails in a checkerboard pattern or with a certain pattern, since it is unlikely that they will be laid out perfectly evenly, and curved rows will visually look disgusting.

The corks themselves are not afraid of moisture, but they quickly get dirty and are poorly washed, so it is best to close them with a tempered glass screen. True, you will have to spend a little money on it and order glass in a special workshop, where they will cut it to a given size and make holes for sockets and fasteners.

Glass is fixed to the wall with anchor dowels, which can be purchased at almost any hardware store.

Although the apron, decorated wine corks may turn out to be an expensive pleasure, but the result achieved will be worth it.

The surface of the countertop, as well as the wall, can be decorated with corks and covered with tempered glass.

Hinged folding table

fixed on the wall folding table IR allows you to save some space in the apartment. In the folded state, it can protrude from the wall at a distance of no more than 10 cm and does not interfere with anyone at all, but when unfolded, it can replace a full-fledged table.

There are many options where you can use a folding table fixed to the wall. Here are just a few of the most basic ones:

Shower for giving

There is probably nothing better than refreshing yourself under running water on a hot summer day, especially if he was working in the garden. Naturally, only a shower will solve this problem and relieve the fatigue that has accumulated during the day.

The shower can be installed independently without the involvement of outside help, the main thing is to choose a place for it and decide on the type of shower cabin.

Three types of cabins stand out among summer showers, which you can freely build on your own:

Installation of a simple shower is done in this way:

A shower cabin frame is being made, which can be assembled from metal, wooden beam or other improvised materials.
A metal or plastic water tank is installed on the roof of the assembled frame, which can be from 50 to 200 liters in volume.
It is advisable to paint a metal container black for better heating of the water. Additionally, several electric heating elements can be installed in the container, then you can take a shower even in cloudy weather.

The booth can be sheathed with boards, plywood, slate, or simply covered with a tarpaulin or cellophane film with folding canopies.

To build on your own

The topic of construction or repair, probably, worries everyone. And, of course, everyone who deals with it wants to finish it quickly with minimal financial costs. Therefore, if you want to save money, you can make some materials for construction on your own. For example, it can be wall SIP panels or such useful tool, like a vibrating plate, the need for which often arises among many owners of a personal plot.

Homemade SIP panels

For their manufacture, you need to prepare a flat, hard platform. After laying a sheet of OSB 10-12 mm thick on it with a rubber spatula with teeth, apply glue to it.

Then lay sheets of foam grade 25-30 on the glue. After that, an adhesive mass is applied on top of the laid foam, as well as on the bottom OSB plate, and the second sheet of OSB is laid on top.

If several stacked boards are being made at the same time, work should be done quickly until the adhesive has set. Usually in this way you can prepare no more than 4-5 panels at a time.

After harvesting, the formed slabs need to be pressurized with a press. Since at home, of course, hydraulic press no, it can be replaced with a thick plywood sheet laid on prepared SIP boards over the entire plane and loaded for 2-3 hours, for example, with several bags of cement, sand or other cargo. You can even use a car by driving onto a plywood sheet along a pre-made flyover.

After the glue has completely dried, the home-made panels are ready, they can be folded into a separate pile and proceed to the preparation of new panels. The manufactured panels should lie unloaded for another day, after which they can be used for their intended purpose.

Vibrating plate manufacturing

To make a homemade vibrating plate, you will need to prepare:

An electric motor with an eccentric brand IV-98E, which is the main part of the vibrating plate.
Steel sheet, not less than 8 mm thick, 450x800 mm in size. It can be ordered at any metal base.
Two pieces of channel no more than 400 mm long.
An inch pipe for the handle and two rubber bushings for attaching it.
Of the tools you will need a welding machine, a grinder and a set of wrenches.

From the narrow sides of the plate, stepping back from the edges by 80-100 mm, make an incision with a grinder to a depth of about 5 mm. After that, bend the edges towards the notch at an angle of approximately 25 0 and weld them by welding. Bends are needed so that the vibrating plate does not sink into the material compacted by it and moves freely along its surface.

Then, across the plate at a certain distance, calculated for mounting the electric motor, two channels are welded with the shelves down. Through advance drilled holes in the channel, with the help of M10 bolts, an electric vibrator is attached to them.

The tube handle is attached to the vibrator via soft rubber grommets, which can be purchased at an auto parts store or hardware store in the hardware department.

Thus, you can make a lot of useful things in the household with your own hands, spending on this only a part of the money that you would have to pay when buying a finished product. You just need to make some effort and have certain skills.

Do-it-yourself making of various handicrafts, furniture, self repair cars are popular not only because of the innate ability of our people to create. This is also a good savings for the family budget.

However, such a hobby requires special equipment. Every home has basic hand tools, including electric ones. Drill, screwdriver, grinder, manual Circular Saw, jigsaw.

These devices facilitate the work of the home master, but with their help it is impossible to perform the work professionally. The home workshop should be equipped with compact machines.

Overview of homemade machines for the home workshop - video

Such equipment is offered in abundance by specialized stores.

Equipping workplace with such an arsenal, you can make anything. But the high cost of the tool negates the savings in the production of crafts.

There is only one thing left - to make machines with your own hands. Homemade equipment can work just as well as factory equipment. In addition, constructive know-how can be added to expand the possibilities.

Homemade machines for a home wood workshop

Wood lathe

It can be made from existing tools. A sturdy table is enough, or just massive board installed on legs. This will be the bed.

A clamping spindle for wooden blanks is optional. As well as a separate drive motor. There is a simple integrated solution - an electric drill.

If there is a speed controller - generally great. A drill bit for wood is fixed in the cartridge. It needs to be finalized: sharpen the working edge in the form of a trident.

The next mandatory element is the tailstock. In metal lathes, it is necessary to support long blanks. When processing wood on a machine without a clamping spindle, the tailstock is a locking element. She presses the blank to the trident and supports it on the axis of rotation.

Typical design of the tailstock in the illustration.

The cutter in such a machine is not fixed in the caliper. Wooden blanks are processed with a hand chisel, which rests on a handpiece.

The master is not distinguished by the greed that some masters suffer from, who do not want to share their findings with others and, like a dog in the manger, neither to themselves nor to people. And this self-taught inventor came up with a great gadget with which you will always be on top and can even improve your standard of living. Why, you can put on stream the production of such an instrument and sell it to everyone. Maybe this is too loud, but you should think about automating and mechanizing all the routine work at home.

8 accessories for craftsmen.

You probably haven't seen many of them. Cool tools create DIYs. These devices will help you work more comfortably in the workshop. The video was filmed on the channel “Hands from Shoulders”.

Folding table for the master

1. Let's start with a folding table, which will be a great helper in a small workshop. It will help to save even a small area. The table has a compartment for small things. Shelf that can be laid out essential tool. Due to the large number of holes, the workpieces can be clamped comfortably and quickly with the help of a clamp. Stops are inserted into them. It is convenient to fix the parts in a vertical position. If inserted into the guide bolts, we get additional emphasis. Having a set of clamps and such a table, you can comfortably perform a variety of jobs.

Folding stand homemade

2. Very original idea folding stand for hand tools. Everyone is in their place. It doesn't take up much space. The design is based on furniture guides. the stand is held in the upper position. Neodymium magnets prevent instruments from falling out of their stocks. A great idea for the Samodelkins, who love to do everything with their own hands.

Apple puller

3.Gardeners will be interested in the fruit puller. Its advantage over analogues is the absolute free of charge and ease of manufacture. It is not at all difficult to find a plastic bottle, a rope and cut a stick. 5 minutes and you can go for apples.

Handicraft apple press

4. If the harvest is large, then the question arises, where to put it? Great option - Apple juice. For purchased juicers, apples need to be cut and peeled, which is inconvenient. The grater below will handle whole apples. Dali only remains to squeeze the resulting mass under pressure. As a result, we get natural tasty juice and almost dry cake.

Tool trolley

5. The mobile tool cart is very convenient for the workshop. When, for example, the workbench is littered with parts. Or it doesn't exist at all. Having loaded into it everything you need at the moment, we get the entire tool in one place at your fingertips.

What can be done from an electric planer with your own hands

6. Another interesting thickness gauge design is based on an electric planer. With the help of guides, it moves in 2 planes. The movement takes place with the help of an elevator. There are rulers on each side of the fixture for fine adjustment.

Grinding tool

7. Having a jigsaw, you can get a cool grinder. Interestingly, it is not the abrasive that moves, but the workpiece itself.

Cheap homemade grinder

8. The most budget version of the grinder, created by the Samodelkins. Used as rollers plastic bottles. They are seated on bearings. Adjustment of the tape on the rollers occurs with the help of lambs. The tension is adjustable with a bolt. The structure is set in motion with a drill. You can slightly improve the design by Samodelkin by replacing plastic bottles with polypropylene tubes.

Homemade self-taught shook the network with his video

The self-taught inventor conquered the online community of craftsmen with his video, in which he presented a fundamentally new utility model to improve the efficiency of the work of craftsmen and those who like to work in the garage. The best part is that it doesn't require buying an idea. And moreover, all this can be done by yourself and even a novice master can handle it. All this is for the benefit of every resident of the cities in which the masters settled, because with such high level mastery, now you don’t want to hammer walls at home on weekends or rattle some kind of ultra-decibel grinder for an incomprehensible purpose. With such a device, you can safely make your own workshop and live rich life Russian artisan.

DIY tool stirs up the web

This video stirred up the community of lovers of inventions in the global network. The master thought about this idea for years and finally brought to the public discussion a brilliant idea in terms of simplicity and a radically beneficial idea for those who used to hammer walls with a perforator, realize their inclinations as a woodpecker and a brilliant builder-grinder, and now they can make themselves rich for free, working in silence workshop in the garage or even in a detached building.

And at the same time, you don’t have to spend money and take out the money saved for beer from the stash. All this is free - the master loves to show the whole world the useful things that he comes up with.

Many car owners use their garage as a workshop, gradually filling it with practical devices that facilitate car repair and maintenance. Many of them can be made independently using the recommendations presented in this article.

Many garage workshop fixtures can be made on your own, the video below shows some of them.

Garage homemade products are devices that greatly facilitate garage life, in addition, they work no worse than factory machines. Having equipped your workshop with such devices, you can independently make the necessary parts for cars, as well as various crafts for home or summer cottages.

Video homemade garage tools and fixtures

It is difficult to predict in advance what devices may be needed when carrying out car repairs, however, there are some homemade products, some are used most often. Some of them can be seen in the video below.

Drawings of homemade devices

A pipe bender is a useful household appliance that allows you to bend metal or polymer pipe under a certain degree. Bent pipes are often used in the construction of greenhouses and greenhouses, installation of heating and other needs. Using the presented drawing, a manual pipe bender can be made independently.

A vise is a practical device used when performing plumbing work. With its help, it is possible to securely fix the part requiring metalwork in a certain position.

This device consists of several parts:

base plate;
2nd lips - mobile and not mobile;
lever;
drive screw.

With the help of small-sized metalwork vise, the drawing of which is presented above, it is convenient to sharpen and other processing of small parts.

The presence in the home workshop of a CNC milling machine allows you to perform whole line work on machining tree.

Homemade milling machine consists of several nodes and parts:

bed;
calipers designed to move cutters;
caliper guides;
spindle with installed cutter;
microcontroller or switching board with microcircuits that automate the operation of the machine;
electric motor with power supply;
drivers responsible for transmitting commands from the controller to the electric motor;
vacuum cleaner for collecting sawdust resulting from the operation of the machine.

A do-it-yourself CNC milling machine allows you to perform engraving and milling work.

Homemade car repair tools

The windshield wiper arm puller is a special tool that facilitates the process of removing the wiper arms. You can make it yourself from a piece of reinforcement, a six channel and a dozen bolt. To do this, using a drilling machine, make holes for 14 and weld 2 nuts on both sides of the hole and a handle from the reinforcement, screw the bolt into the workpiece and, putting on heat shrink, screw in the threaded rivet. The tool is ready.
Another version of the device for shooting wiper leashes is shown in the photo below.

Another useful home-made device with which you can manually re-roll the wheels yourself. Another version of this device can be seen in the photo below.

When carrying out serious car repairs, as a rule, you can not do without a lift. A factory-made device is not cheap, and is not needed very often, so it may well be replaced with a home-made device.

Homemade machines and accessories for the garage

Having made devices for tire fitting and balancing, you can independently perform these works, significantly saving money on car maintenance. In addition, such devices will come to the rescue if it is not possible to come to a specialized tire fitting.

In your garage workshop you can equip universal machine for tire fitting using improvised materials - metal pipes and a hub.

When doing various crafts for the home, it often becomes necessary to drill an even hole. This is difficult to do with a conventional drill, but if you make a stand for a drill, such as the one shown in the photo, then drilling without distortions will be much easier. This design can be made from various materials. For instance:

from metal;

from wood.

Using the diagram below, you can make your own drilling machine from a drill.

Usage homemade press will allow in the garage workshop to produce products by pressing. It is possible to make such a device from a hydraulic jack fixed at the top of the bed, which in turn is welded from improvised materials. The pressure in this case is directed downward.

Another version of a homemade press, the design of which involves mounting a jack at the base of the bed. In this case, the process of pressure is produced upwards.

With the help of a home-made press, you can straighten, bend sheets of metal, compress cardboard, fasten individual elements. The video below demonstrates how to make such a necessary device yourself.

Tool storage in the garage

The presence of order is the key to comfortable use of the workplace in the garage. Special organizers are designed to ensure this order in the workplace, allowing you to conveniently store and easily find the right tools. You can make such devices yourself, using improvised means.

Simple and accessible way keep hand tool, is a wall organizer made from tin cans attached to a plywood sheet. In addition, several hooks or nails can be nailed to it in order to conveniently hang measuring and electrical tools. In the absence of cans, PVC pipes of various diameters, cut into pieces and screwed to a sheet of plywood or chipboard, can be used as holders.

Even easier to do special device to store screwdrivers. To do this, you need to take a wooden block and drill holes in it. right size. Fix the finished holder on the wall. On the same holder, you can organize a storage system for chisels and a chisel. It is enough to cut special holes in a wooden blank. In the same way, you can make a holder for power tools by sawing the appropriate holes in a wooden shelf.

An interesting way to store tools is suggested in the photo above. Its principle is based on the use of magnetic tapes attached to metal strips. With the help of such a system, it is convenient to store drills, keys and other metal tools.
Convenient and practical organizers for storing screws, bolts, nails and other small things can be made with your own hands from transparent plastic jars with lids. So that they do not take up space, you should attach them by the cover from below to the shelf. This and other ways to store tools allow you to efficiently use the space in the garage and everything you need at hand.

The video below shows how to set up a simple and convenient tool storage system in your workshop or garage.

Homemade woodworking tools for the home workshop

Homemade milling machines can perform one or more operations. Preference, of course, is given to multifunctional devices that save space in the garage workshop. With their help, you can:
make recesses of a certain shape;
drill holes
make grooves;
process workpieces.
The simplest milling machine can be made on the basis of a drill. To do this, it is attached to steel profile or in a plywood case, and a rotating clamp is placed opposite it. Processing of details is carried out with the help of special cutters held by hands.

Homemade lathe

DIY creation lathe allows you to make dishes, interior decor and furniture from wooden blanks. Such a device will become an affordable alternative to industrial models, and will help to realize their creative potential. A homemade lathe can be made from individual components and parts:

an electric motor used as an electric drive of the machine;
the headstock, which can be an electric grinder;
tailstock made from a drill;
stop for incisors;
transverse guides;
frame made of metal profiles or beams.

Front and tailstock lathe are the main working elements, between which is placed wooden blank. The rotating movement from the electric motor is transmitted to the workpiece through the headstock, while the tailstock remains static, responsible for holding the workpiece. If you equip a home-made lathe with additional devices - a baluster, a trident, a copier and others, then its functionality will increase significantly.

The video below demonstrates how to make a lathe with your own hands.

If necessary, drill precise holes in metal, plastic or wooden details, experienced craftsmen recommend using a drilling machine. Unlike a drill, which vibrates strongly during operation, such a device provides a high-quality result, regardless of the material and thickness of the workpiece. You can make a simple drilling machine yourself by using the same homemade drill, but installing it in a vertical position on a frame made of furniture board and attaching it to a metal rack. If necessary, such a machine can be equipped with an asynchronous motor.

As a rule, home craftsmen do not stop at the manufacture of the machines themselves. Very often they work on improving existing equipment.

The video below demonstrates useful accessories for a lathe that expand its functionality.

Homemade metal fixtures for the home workshop

These do-it-yourself fixtures for the home workshop are designed to facilitate the metalworking process. They are usually made from improvised materials and tools.

Among the most popular devices, it is worth highlighting:

pipe benders;
presses;
vise;
milling, locksmith, turning, drilling and thicknessing machines;
devices for sharpening drills, knives and other tools.

With their help, a home craftsman can make practical devices for a summer residence, a garage, and also equip a comfortable home. Examples of useful machines and devices in the household can be seen in the photo below.

Homemade cutting machine for metal

How to make some useful household appliances, the video demonstrates.

Taking into account the presented recommendations and drawings, any home master will be able to make useful devices for the garage and machines for his workshop, arrange an ergonomic space in it, and realize his creative abilities.

A summer cottage is the territory where you can give yourself the freedom to conduct numerous experiments and dream up plenty. This is manifested not only in interior design, but mainly in the design of the garden or vegetable garden. Inquisitive and resourceful owners have not been guided by expensive and standard methods for arranging their sites for a long time, since there are many alternative solutions for virtually all areas of activity.

There are several varieties of vertical beds that allow you to optimize the use of free space. Custom designs are a great opportunity to create interesting design garden, orchard, suburban area.

This type of beds in most cases is used for growing ornamental plants or herbs.

Materials for manufacturing:

The length of the drainpipes is adjustable in accordance with the wishes of the owner of the site. However, bulky beds should not be made, as they can complicate movement around the territory.

Creating a bed

Stage 1. Create a container. To do this, we take a drainpipe, cut it in two lengthwise and put on special plugs on both sides.

Stage 2. We take the prepared metal holders, put them on the resulting frames for the beds.

Stage 3. We make holes in the pipe. They are made in those places where there will be metal fasteners.

Stage 4. We pass a cable or a strong rope through the holes made.

Stage 5. We fix the cable / rope with fasteners.

Stage 6. We fill the resulting beds with expanded clay and soil.

Stage 7. We plant plants in the beds.

Stage 8. We hang pipes to the chosen place. Sometimes a special wooden crossbar is placed for this, more precisely, a design in the shape of the letter “P”.

Step 9. Alternatively, you can make a special design for the pipes.

Important! A drainpipe bed is not resistant to strong gusty winds, so you should choose a place for it that is not blown from four sides by winds. Otherwise, the frame will quickly collapse, nullifying all your efforts.

A bed made from a plastic bag is another modification of vertical beds. It is extremely compact, functional and interesting in appearance. You can make such a bed in a couple of hours.

Materials for manufacturing:

durable polyethylene film;
sewing machine;
priming;
seedling.

In order for the bed to be strong, it is recommended to pay special attention to the thickness polyethylene film, which in this case will act as the "framework" of the structure. The minimum film thickness is 0.2 mm.

The process of creating a polyethylene bed

Step 1 . We cut out 2 rectangular pieces of film, the size of which corresponds to the size of the created beds. An allowance of one and a half to two centimeters should be left on each side. The recommended diameter of the beds is twenty centimeters.

Step 2. Sew the rectangles together, leaving only the top of the bag unconnected.

Step 3. We sew a handle to the future bed, the strength of which will withstand the weight of the bag filled with soil. It should also be noted that when watering, the weight will increase.

Step 4. Fill the bag with fertilized soil.

Step 5. We make horizontal cuts on the bag in increments of twenty centimeters. They are necessary in order to plant seedlings in the garden.

Step 6. We plant seedlings.

Step 7. Water the soil regularly and add the necessary fertilizers.

With these simple steps, you can get a cheap and useful garden bed.

An integral element of each suburban area is a compost heap. This is the place where all kinds of biochemical reactions take place that ensure the creation of fertilizers.

In order to create fertilizers that will satisfy all the requirements for them, you should carefully consider several milestones: creating a container and directly making the compost itself. Let's talk about each of them in more detail.

Stage 1. We take eight supporting posts of the same length.

Stage 2. We process the lower part of the wooden posts with engine oil or tar.

Stage 3. We dig the posts into the ground so that they are reliable and stable. If the compost bin is located next to the fence, then 4 posts (that is, one side) can be attached to the fence. This will avoid having to dig 4 holes.

Stage 4. Between each two adjacent columns we nail the crossbars in such a way that in the end we get three independent sections. Be sure to leave gaps that will serve as ventilation holes.

Stage 5. In two sections, horizontally nail the boards to half the height of the pillars. In these places, it is planned to create two small doors.

Stage 6. There will be a large door in the remaining section, so only one board should be nailed. It should be located at the very bottom in a horizontal position, that is, like a regular crossbar.

Stage 7. Install the covers. To do this, you can use one large solid board.

Stage 8. We install the doors prepared in advance.

Stage 9. We provide doors with handles and latches.

Stage 10. We process wood using special impregnations.

Stage 11. We paint the box in any color that matches the preferences.

Many gardeners mistakenly believe that any components can be dumped into the compost heap. In fact, in order to create the right biofertilizer, the “ingredients” must be carefully selected.

Among the required components compost heap the following components:

peat;
ash;
needles;
tree branches;
leaves;
hay or grass;
wood ash;
plant roots;
raw vegetables and fruits, etc.

All elements are randomly mixed in the heap. To speed up chemical reactions it is recommended to cover the pile with a tarp (this is especially true in the absence of a box).

Trips to the country with the family suggest the presence of entertainment elements on the site that will delight children. The most common way to occupy young summer residents is a swing.

Building a swing yourself is not an easy task, but quite doable. Of course, you can always take a stick, tie it with a rope and hang the structure on a tree, but this can hardly be called a full-fledged swing. Real craftsmen prefer to build convenient structures with comfortable place for sitting.

Structural components:

two logs;
strong rope.

Indicators:

log diameter - 85 mm;
log length - 700 mm;
the distance between the ropes is 500 mm.

Making a swing

Stage 1. We stretch the ropes between the logs.

Stage 2. We wrap each log with ropes.

Stage 3. We release the ropes out.

Stage 4. We tighten the ropes by 3 knots.

Stage 5. We fix the swing on the tree.

Important: such a swing is designed for only one person.

Garden path from improvised materials

There are several types of garden paths that you can easily do with your own hands.

Step 1. Remove the sidewall from the tire using a knife or saw.

Step 2. Cut the tires.

Step 3. We line the space with corrugated stripes.

Step 4. Paint the track with paint.

Step 5. Sprinkle with stone chips.

This is an economical option for those who do not want to rack their brains and spend time on a full-fledged garden path. Tire track is usually used for vegetable gardens, as it easily fits into the ground.

Stage 1. We paint the corks in different colors.

Stage 2. We dig a small trench.

Stage 3. We drive in supports to strengthen the future track.

Stage 4. We construct formwork using boards.

Stage 5. We install spacers along the edges of the trench.

Stage 6. We place crushed stone deep into the trench and carefully tamp it down.

Stage 7. We make a solution of sand, cement, glue and water.

Stage 8. Pour the solution into the trench.

Stage 9. We press the plugs in random order. Smooth multi-colored stripes look interesting.

These are the simplest and quick ways make a garden path without purchasing expensive materials.

DIY tools

The expression “everything will come in handy on the farm” turns out to be as relevant as possible when it comes to canisters. From this plastic container you can make a large number of indispensable tools that are actively used in the process of dacha work.