Corner metal 25x25 weight 1 p m

Product description:

The length of the corners is 12 meters.

The price is specified at purchase from 5 tons of one position.

When buying a larger or smaller volume, check the price with your manager.

Corner equal-shelf 63x63 - irreplaceable in construction and aircraft industry.

Corner 63x63 - This is a shaped product. The numbers mean that the width of the corner shelves is 63 mm., There is no hollow space in its section. Equal-shelf steel corner 63x63 is most often made from carbon steel according to GOST 380-94 of ordinary quality. Or from low-alloy steel with increased strength in accordance with GOST 19281-89. Weight running meter products with shelf dimensions of 63x63x5mm is 4.81kg.

If we are talking about a hot-rolled corner, then it is formed under high pressure, on a special rolling mill. And cold-rolled or bent corners are profiled on special bending machines.

The corner 63x63 is used mainly in construction. Both for decorative purposes and for the assembly of load-bearing structures. And also for the assembly of small architectural forms of medium and large structures. Such, in particular, as: canopies and canopies, public transport stops and trade pavilions. Depending on the complexity of the task, a corner of normal or high accuracy is used. So, for example, a high-precision equal-shelf corner 63x63, namely, duralumin is used in the aircraft industry.

Buy goods "Steel angle 63x63 (equal-shelf hot-rolled)" at a price per linear meter 217.75 rubles.

Metalworking services

Metal band sawing is band saw moving in a circle and cutting metal profile located in the work area.

The main advantages of band saw processing are a clean and even cut, the cut is obtained without burrs and sags, since the metal is not subjected to thermal stress.

The most popular cutting band saw profile pipes hollow section as there is no crumple of edges. No less in demand is the cutting of metal beams (I-beams) in this way to obtain a perfectly clean cut.

Rolled metal dimensions suitable for a band saw machine 400x600 mm.

You can order rolled metal products from us (Reinforcements of construction, I-beams, profile pipes of square and rectangular section, circle, square, corners, steel channel, etc.) according to your drawings and dimensions on a band saw machine.

Today, band saw cutting is popular seamless pipes, in this case it is possible to sell not a whole pipe, but a piece of pipe or several pipe sections of the required length.

The cost of band saw cutting consists of many parameters (what we cut, steel grade, dimensions, number of cuts, etc.), so please check with your manager for the cost.

We offer gas cutting services, that is, dividing it into parts according to the customer's size. The main advantage of manual gas cutting is its mobility and efficiency. Basically, manual cutting of metal with gas is ordered to reduce the cost of transportation costs, in order to be able not to involve long lengths and heavy equipment for unloading for the transportation of rolled metal.

Manual gas cutting is carried out either in advance by agreement with the customer, or directly during the loading of rolled metal.

The amount of processed rolled metal is taken to calculate the cost of the service: 1 cut is equal to 5% of the amount, for each subsequent cut we add 2%.
Example: 4 cuts = 5+2+2+2 = 11% of the cost of rolled metal.

Of the minuses of this metal cutting, one can indicate the quality of the cut itself, along the edges of the cut there will be sagging of metal and scale, and the evenness of the cut suffers a little. Basically, this type of cutting is used for cutting reinforcement, beams, channel bars, rolled sheets, angles and other long and pipe rolled products where a high-quality cut is not important.

For a high-quality cut, other types of metal-roll processing are used. You can read about it in the following sections.

The topic of the article is a corner 25x25x3, the weight of 1 meter of the product, the total length. Everything related to this type of profile.

This type of rental is extremely popular among developers. Why? Corner 25x25x3 is in demand in many areas of construction. Sometimes it is impossible to do without it when pouring the foundation, in which it works as an element of rigid reinforcement, thereby enhancing the strength characteristics of concrete. It is widely used in the manufacture of window grilles, etc.

And in most cases, the developer needs to know its weight. In particular, the weight of 1 linear meter of the corner. Mainly in order to order transport of the required carrying capacity.

Passport weight of 1 meter corner 25x25x3

This figure is standard, it is equal to 1.12 kg.

But you need to take into account the fact that on sale you can find a corner 25x25x4 with a thicker shelf. Naturally, the weight of 1 meter of such a product will be slightly higher - 1.46 kg.

The popularity of the product is due to its light weight and at a small price, so it is not particularly stale in warehouses.

Production has been debugged for a long time - it's just a drawn or rolled L-shaped profile with a shelf width of 25 mm and a thickness of 3 mm.

What can be said about the length of the corner 25x25x3? Usually it is equal 6 meters. Why not longer? With a small cross section, it makes no sense to increase the length, because twisting of the goods during transportation and other unpleasant things are inevitable. But there is also a nine-meter product.

Steel for production is usually high-quality, carbon structural. The profile of the corner has rounded internal corners and direct external. As a result, this profile works great for bending.

Are there tolerances from the given numbers? Exists. by weight of the corner 25x25x3 should not go beyond 3-5%. Deviations along the length should be within the parameters of less than 0.8%.

Product description:

The length of the corners is 12 meters.

The price is specified at purchase from 5 tons of one position.

When buying a larger or smaller volume, check the price with your manager.

An equal-shelf angle 75x75 is an accurate and reliable supporting element.

Corner 75x75 - this is an L-shaped metal profile with equal shelves. Its mass is about 7.96 kilograms / linear meter, it depends on the thickness of the shelf, which can vary from 5 to 9 mm.

It is made from steel ordinary quality, according to GOST-y 380-88, or from high-strength steel 12GS, 09G2S, 16GS - according to GOST 19281-89. The production process is the drawing of a metal ingot by rotating shafts, followed by forcing through a rolling mill. And in cold-rolled manufacturing, finished steel sheet cut and then bent on a bending machine.

A corner with such a width of shelves is used in construction to strengthen load-bearing structures. special kind equal-shelf angle made of stainless steel is used on special objects, with increased level air humidity. And galvanized - in medical premises and Food Industry. Corner 75x75 of normal accuracy is used in the manufacture of metal fireproof doors or gates. It is strong enough and can act as a supporting element. Another equal-shelf corner 75x75 is indispensable for the installation of siding or heat facade slabs.

Buy goods "Steel angle 75x75 (equal-shelf hot-rolled)" at a price per linear meter 262.62 rubles.

Metalworking services

Band saw metal processing is a band saw moving in a circle and cutting a metal profile located in the working area.

The main advantages of band saw processing are a clean and even cut, the cut is obtained without burrs and sags, since the metal is not subjected to thermal stress.

The most popular is the cutting of profile pipes of hollow section with a band saw machine, since there is no crinkling of the edges. No less in demand is the cutting of metal beams (I-beams) in this way to obtain a perfectly clean cut.

Rolled metal dimensions suitable for a band saw machine 400x600 mm.

You can order rolled metal products from us (Reinforcements of construction, I-beams, profile pipes of square and rectangular section, circle, square, corners, steel channel, etc.) according to your drawings and dimensions on a band saw machine.

To date, band saw cutting of seamless pipes is popular, in this case it is possible to sell not a whole pipe, but a piece of pipe or several pipe sections of the desired length.

The cost of band saw cutting consists of many parameters (what we cut, steel grade, dimensions, number of cuts, etc.), so please check with your manager for the cost.

We offer gas cutting services, that is, dividing it into parts according to the customer's size. The main advantage of manual gas cutting is its mobility and efficiency. Basically, manual cutting of metal with gas is ordered to reduce the cost of transportation costs, in order to be able not to involve long lengths and heavy equipment for unloading for the transportation of rolled metal.

Manual gas cutting is carried out either in advance by agreement with the customer, or directly during the loading of rolled metal.

The amount of processed rolled metal is taken to calculate the cost of the service: 1 cut is equal to 5% of the amount, for each subsequent cut we add 2%.
Example: 4 cuts = 5+2+2+2 = 11% of the cost of rolled metal.

Of the minuses of this metal cutting, one can indicate the quality of the cut itself, along the edges of the cut there will be sagging of metal and scale, and the evenness of the cut suffers a little. Basically, this type of cutting is used for cutting reinforcement, beams, channel bars, rolled sheets, angles and other long and pipe rolled products where a high-quality cut is not important.

For a high-quality cut, other types of metal-roll processing are used. You can read about it in the following sections.