How to sheathe the slopes of the front door mdf. How to make slopes of the front door from MDF

MDF is one of the most popular materials used for finishing. Such panels look very representative and also fit any style. Very often used for finishing the doorway. Let us consider in more detail how to make slopes on the front door with your own hands from MDF.

MDF slopes - a popular option for finishing a doorway

Material Features

To complete, a prerequisite is the removal of even and neat slopes. Often the owners decide to do everything with their own hands. For these purposes, a variety of different materials, one of the popular options is MDF.

MDF slopes can be used for entrance doors in almost any interior. This material has a number of positive qualities:

• Strength. It is not afraid of moderate blows and most damage.
• Decorative. Looks great, brings an atmosphere of comfort and style.
• Variety of coatings. It may differ in color and type of top layer: veneer, eco-veneer, PVC, etc.
• Ease of installation. Easy to handle and install with your own hands, even for a beginner.
• tree imitation. The coating basically imitates wood texture, it may look like an expensive breed.
• Soundproofing. Provides additional protection against outside noise.

The main advantages of MDF panels are their strength and ease of installation.

It should be borne in mind that under adverse operating conditions, in particular high humidity, as well as when using low-quality MDF material, it can peel over time, swell and delaminate. Also, the coating does not withstand strong impacts and contact with sharp objects.

Opening insulation and preparation

The first thing to start with is the preparation of the opening itself. Doing it yourself is very easy. First you need to free the opening from everything superfluous, in particular, from the remnants of construction debris. If you are afraid to get dirty or damage the new door, you can leave it on protective film or even remove the canvas for the duration of the work.

First of all, remove the dust and seal all the cracks with mounting foam or sealant. Then you need to take care of applying an antiseptic impregnation or primer. To additionally isolate the opening from the cold and noise from the outside of the apartment, a layer of insulation should be laid along the slopes. As such a substrate is most often used:

• mineral wool;
• isolon;
• synthetic winterizer;
• polyurethane foam;
• expanded polystyrene.

Proper finishing of the slopes of the front door involves a layer of insulation

An excellent option is spraying insulation, but this is a very costly undertaking. To facilitate further cladding and final insulation of gaps, it is recommended to perform. A small layer will be enough, it is not necessary to display a perfectly flat surface. Special corner profiles are installed in the corners, this will not only facilitate the task of leveling, but also strengthen such a vulnerable part of the slopes.

Marking and cutting

An equally important stage in the process of finishing door slopes, rather than the preparation and installation itself, is the sawing of the necessary fragments. In order to take measurements as accurately as possible, one tape measure will not be enough. Use a square and templates to create original patterns.

You need to start with the bar that you plan to fix in the first place. Usually this is the top panel. Please note that in most cases the edges of the slopes do not have an even cut, but go slightly at an angle. All this should be displayed on the MDF. Subsequent elements must be applied after the installation of the initial panel. That is why the process of marking and sawing is combined with the installation.

Sawing MDF panels should start from the top bar

You can cut MDF with a hacksaw, saw, but a jigsaw is considered the best option. Due to its cutting element, it is possible to obtain a perfect cut without chips and burrs. Plus, you don't have to put in any effort.

When working with sidewalls, be sure to take into account the presence of a threshold. This is important point, as it can significantly affect the height of the side slats.

Panel installation

In order to install door slopes in the opening with your own hands, you need to perform several stages of work:

1. First you need to decide on the method of attachment. If the panels do not have a locking connection, it will be easiest to fix them to the frame. As the latter, aluminum profiles or wooden planks can be used, which is more preferable.
2. Determine the level at which the trim will be placed. At the same time, it is important to take into account the thickness of the panels themselves, since if the material protrudes excessively in the opening, the movement of the door leaf may become difficult.
3. The frame is fixed in the wall with bolts. You will also need a drill for this. With inside you can fix the bar on the door frame itself. There is also an alternative wooden frame- special guides that are installed at the corners of the opening. This option is suitable for mounting L-shaped panels.
4. After the frame is fixed, MDF panels are applied to it and all excess is cut off. You can first fix the top crossbar, and then proceed to the sidewalls, or do the opposite. MDF can be glued to wooden planks using liquid nails or beat. In the latter case, small nails without hats are used.

Examples of finishing the slopes of entrance doors with MDF panels

In order to eliminate drafts, additionally insulate the slopes and provide a stronger grip, mounting foam is used. It is important not to smear the MDF during the foaming process, as it will not be easy to clean off.

Final finishing

After the mounting foam dries out, and the glue grabs, you can proceed to the final finish. First of all, it is necessary to cut off all the protruding sections of the foam along the edges. This is best done with a paint knife. In order for the foam not to collapse under the influence of the external environment, it must be carefully puttied. In order not to smear the new slopes, cover them with masking tape.

The final step in the installation of slopes is the installation of platbands

To give the doorway an ideal appearance, platbands are installed over the closed slots on the slopes. The last stage is the masking of the junctions. If you used nails, then you need to use special mastic to match the finish or furniture stickers.

Thus, it is possible without special efforts install slopes for entrance doors both from MDF and other similar material. Doing everything with your own hands is quite within the power of everyone, since they are used for work available materials and simple technologies.

Door slopes made of MDF give the interior a completely finished look. But their installation requires compliance with certain technological rules that allow you to achieve the necessary reliability. The fact is that any violations can lead to undesirable consequences. Although all the work is easily done by hand with a minimum set of tools.

- This is a simple procedure that requires only a certain accuracy and compliance with some nuances. Different materials can be used in the work, but MDF panels are considered the most successful. Their popularity is due to numerous advantages:

1. Availability. Indeed, now there is a wide variety of these products that are affordable. You can buy all the necessary accessories for them.
2. Ease of installation. Naturally, if there is no experience, then any finishing work may seem complicated. But it is worth a little practice and understand the essence - the work will seem easy enough.
3. A great appearance. There is a certain rule, which is that all elements must be combined with each other. Therefore, the slopes on the front door must be made of suitable products. MDF - will be an excellent solution in such a situation.
4. Additional sound and heat insulation. This is an important point that many initially do not take into account.
5. Security. The panels are completely eco-friendly.

MDF panels allow you to create a spectacular decorative coating and insulate slopes

We must not forget that there are no completely ideal materials. Therefore, the disadvantages should also be taken into account:

1. Medium resistance to damage. Such a product perfectly withstands various impacts due to its high density, but is very unstable to scratches, as well as to other similar influences.
2. MDF is a poor option for rooms that have high humidity.
3. Sometimes there are difficulties with the selection of additional elements. The fact is that overhead MDF corners, which have a limited decorative range, can be used for decoration. Therefore, you should think over the overall design in advance.

On a note! Many mistakenly confuse the finishing of MDF doorways and the installation of extensions on door frames. These are completely different procedures. It should be borne in mind that extensions are great for narrow (up to 11-12 cm) and straight openings that are found in interior structures.

Finishing technology

Installation is divided into several stages, each of which depends on the general condition of the opening. It is assumed that all work will be carried out thoroughly.

Training

It all starts with the fact that preparations. This is especially important for front doors. The fact is that they are a link with the outer space. Accordingly, this leads to the fact that cold can penetrate through the existing cracks and cracks and heat can escape.

The following manipulations are performed:

• The surface is completely cleared of everything superfluous. It is necessary to foresee the protection of the door leaf and adjacent areas (floor, walls) from damage. They are covered plastic wrap and cardboard.
• The coating should be carefully examined. If it has traces of destruction, then it is removed completely, to the ground.

On a note! The front door can be full of surprises. The fact is that a lot of wires are passed through the jamb. This is an electric (input) cable, twisted pair to the Internet and more. Therefore, extreme caution should be exercised.

• If work is carried out in connection with the installation new door, then a well-cured polyurethane foam is cut off.
• A layer of plaster or putty is applied. It should completely cover all cracks and chips. After drying, everything is covered with a primer, and the joints are coated with sealant.
• A layer of thermal insulation is laid. Exist various options this product, which are selected based on the thickness of the assembly seam. The fact is that the thicker it is, the more the layer needs to be built up in order to install the MDF parts.

Stages of preparing the slope for the installation of MDF panels

Finishing the slopes of the front door with MDF panels is a procedure on which the overall microclimate inside the house or apartment depends. If you do preparatory work poor quality, for example, to leave gaps and unsealed joints, then there is a high probability of a draft.

Detailing

Detailing is done by hand quite simply. It is necessary to remove all dimensions from the opening and transfer them to a piece of paper. Based on the available data, a diagram of each element is drawn up. Important nuances are taken into account:

1. The presence of a threshold.
2. The sequence of fragments. Namely, the thickness of the horizontal element is subtracted from the two sidewalls.
3. The overall width of the opening, as well as various angles of inclination.

It is necessary to carefully measure the opening, taking into account all the features of the door slope

Used for cutting electric jigsaw, which can be replaced hand saw on wood with fine teeth.

Mounting

Facing the surface of MDF panels occurs in two ways. The width of the opening also plays an important role. If the strips are not large enough, then they have to be joined. Of course, this is best avoided. In this case, the installation is carried out exclusively on the crate. If it is possible to install solid parts, then an adhesive option can be used.

On a note! MDF has a sheet variation. Such products are great for any work, but have limitations on the decorative component.

In the presence of a wide door slope, which requires docking of panels, MDF installation produced only by the method of erecting a frame

Frame installation

This method involves the use wooden beam, which will serve as a support for the parts. There are tips where it is proposed to use a metal profile. This option is great if the walls are sheathed with a common frame.

The technology is:

• Rails are installed horizontally. Between them it is advisable to maintain intervals of 30-45 cm.
• They are attached to dowels.
• The voids are filled with mounting foam or insulation.
• Prepared parts are tried on in size. Next comes the turn of their fixation. To do this, you can use self-tapping screws. They are recessed into pre-prepared holes, which are smeared or closed with special overlays.

You can use other technology. In this case, the foam will act as glue. It is poured after installing the parts in the existing voids. Care must be taken, the composition should not be much.

Mounting foam tends to expand, therefore, when filling voids, it is important not to overdo it with the amount of material poured

Adhesive method

Slopes made of MDF on the door can be mounted without using a frame. This option provides that the parts will be laid directly on the surface. For this, glue is used. This method is perfect when the thickness of the mounting seam is minimal.

The general procedure is as follows:

• Good initial preparation is essential. It should be borne in mind that it is not always possible to use a heater in this situation. Therefore, all cracks must be smeared, and the areas covered with a layer of putty. Everything is treated with a primer.
• Glue is applied to the wrong side of the parts that are pressed against the surface. After waiting a little, they are torn off. You should wait for some time, which is necessary for the adhesive composition to gain its functions.
• Further, all elements are installed in their places. Existing joints are covered or covered with overlays.

Now all that's left is to finish the exterior. For this, facing with platbands or simple leveling with putty is excellent.

In order to install the door yourself, you need to have some experience and knowledge in this matter. The MDF slopes of the front door in this case are part of the space, and quite important. Installation of slopes, which are often made of MDF, takes place at the final stage of installing the door itself.

Function MDF slopes in this case, it consists, firstly, in improving the appearance of the structure, and secondly, in warming the room. The installation method may be different, however, it is necessary to take into account the material from which the door leaf itself is made, since the protective properties of the door and other equally important characteristics depend on this. When installing a door, you must consider the following rules:

• to ensure the free opening of the door, the installation of slopes must be carried out at the bottom of the box (20 mm);
• slopes on the front door must be placed at different distances;
• for correct installation doors must be properly measured.

Cladding can be done in a different way. The standard method includes attaching a ready-made slope directly to the box itself. In this case, there is a great time saving, since it is not required to make the slopes for the entrance doors themselves.

There is a finishing option using drywall or plaster. This method is considered no less popular, however, not everyone will be able to produce such a finish, since this requires some knowledge in the construction field.

In order to determine the method, you need to know the type of box installed. If the door slopes are installed on the interior structure, insulation is not required in this case. Here, the best option would be facing with decorative materials.

As for the front doors, they require more careful and careful work. Here, the best option would be MDF panels (wood fiber boards). Their popularity is quite high, since this material is not affected by temperature and dampness. The color of the panels in this case is selected in accordance with the color of the door itself. High-quality finishes include the combined use of MDF with plaster.

Tools and materials for work

Before starting work, you need to make sure that you have all the tools. To install the slopes of the front door, using combined method, you will need:

• foam, with which joints are sealed;
• primer, cement, putty, sand;
• dowel;
• mortar;
• profile used in construction;
• liquid Nails.

Manufacturing instructions

This method requires special attention, so you must follow all the instructions exactly. It would be useful to watch a video on the topic: "How to make slopes." As soon as the installation of the door is carried out, the appearance of cracks can be observed along the edges. In this case, in order to close up such gaps between the wall and the box, a special foam (mounting) is used. After using it, you need to wait some time for it to harden, cut off the excess and trim the surface.

This is followed by surface treatment in those places where the joints will be located. The first step is to apply a primer, which will strengthen the material and improve its protective properties. Surface evenness can be ensured by plastering using a profile. As for the corners, their fastening to the corner is carried out with the help of dowels.

You can start plastering, but first you need to prepare the appropriate solution. It is prepared simply, it is enough to mix sand, cement and lime mortar. In some cases, it can be replaced with putty, which is used for facade cladding. It must be applied in an even, fairly thick layer, removing excess with a wooden lath.

The corners are reinforced with a perforated profile laid in a layer of plaster. The next layer should be applied after the previous one has dried. Once the puttying process has been completed, the MDF panels can be installed. Finishing the slopes of the front door with MDF panels with your own hands includes the following steps:

1. Before starting work, it is necessary to prepare the basis for the slopes for the front door. The appropriate solution is laid on the surface, after which it needs to dry. A primer layer is applied.
2. Cutting MDF. It is done to get three separate parts on the top of the structure and on the sides.
3. Glue is applied to the upper part of the opening and the MDF panel is pressed. It must be pressed and held until the mass dries. Other parts of the slope are made in the same way. For a tighter fixation, on the recommendation of the builders, spacers can be used.
4. The space formed during the work is sheathed with plastic of a small size.
5. The next step is to measure the opening angles. To prevent gaps from appearing, before mounting, it is necessary to attach the material and see how tightly it fits. Then we attach the panel details to the corners. It should be borne in mind that the corners account for half the value of the opening angle.
6. The final step is decoration. For this, the same material from which the door itself is made is used.

Thus, observing all the nuances and following the instructions, it will not be difficult to do quality work, and if you still have any questions, you can watch the corresponding video.

When the repair and installation of the front door is completed, doorway around it often has an unsightly appearance, which can spoil the feeling of joy after the completion of the repair. In addition, unshaped edges allow drafts to penetrate inside and lower the temperature in the room. Therefore, it is very important to correctly make and arrange door slopes in order to prevent the influence of all these negative factors.

Peculiarities

When doors are already installed in the apartment, many people think that protection from external factors, such as noise and cold, is provided. But it is not so. It is necessary to carry out additional finishing in order to complete the repair and give the doorway a harmonious appearance. From the outside, the entrance doors are always trimmed with platbands or a special solution during installation, but the internal slopes of the master during the installation of the door frame are always left to the discretion of the owners of the house.

Finishing the slopes is not included in the work of installing the door. That is why, in front of your eyes, concrete, brick or other materials without exterior finish. To hide all this, you need to correctly arrange the slopes. Not all companies that install doors provide additional services for the design of slopes. That's why given task very often it is shifted to the shoulders of the owner of the house, and he has to do this work on his own.

The purpose of installing this element is to give an elegant appearance to the door and doorway, as well as to complete its outlines.

In addition, door slopes are installed in order to hide all door fasteners from prying eyes and increase protection against burglary. In addition, with their help they provide heat and sound insulation, as well as protection from dust and dirt flying from the street or from the landing.

Slopes are a very important and necessary element, which can make the doorway more presentable and tidy. They are a beautiful decoration that complements any hallway. The slopes are designed in accordance with the style of the front door, as well as in accordance with its colors and with the stylistic design of the hallway. That is why choosing the right slopes is a very important task.

Apart from the decorative function, the slopes also very effectively insulate the door frame and allow you to hide the joints between the box and the wall. Slopes also hide mounting foam. Thus, this element also allows you to additionally perform the role of thermal insulation. Mounting foam, located in plain sight in the room, absorbs moisture and loses its protective properties, and at the same time it looks very neat.

Thus, door slope is very important element, which pay attention during the repair.

Kinds

There are three main systems of slopes for door structures, which differ in the method of installation:

• Applying cement to the wall and subsequent plastering. Such a finishing system is considered the most reliable and quite cheap. But not everyone can cope with such a task, it is a very time-consuming and painstaking process. In order to create very even and high-quality surfaces, it is necessary to have the skills to prepare the right plaster mortar and experience in its uniform application and distribution.

• Slope design system using panels and special glue. In this case, it is made adhesive mixture and ready-made finishing panels are applied to it. This principle is quite costly. In another way, it is called wet.

This process is very time consuming as each layer of adhesive needs to dry well before you apply the next layer. But even with the long duration of such work, they are quite simple and even a beginner in the installation business can handle them.

Fixing the finish to an already finished frame. It's very simple and fast way, which allows you to achieve ideal in shape and very neat door slopes. So you can not only hide from prying eyes concrete wall, bricks and polyurethane foam, but also close all wires and other communication networks.

In addition, you can independently install additional lighting fixtures in the door frame and beautifully play with the light in this area of ​​the room. This option is suitable for both panel apartments and private houses.

The only drawback of this method is the low strength and susceptibility of finishing materials, even on steel frame to mechanical stress. Thus, this option will be more prone to hacking. As a rule, it is used for finishing wooden door structures inside the apartment.

For more information on how to make a slope of an MDF front door, see the following video.

materials

For the design of slopes, high-quality and stable finishing materials are often used.

Dye

This is one of the most popular coatings, which allows you to decorate the door slope very brightly and interestingly. You can make it an interesting accent of your hallway. In addition, you can choose the paint to match the color of the door. In this way, even a metal door can be decorated. You can buy water-based paint or use the usual version. In addition, you can apply a beautiful textured pattern that will look very original and will decorate any hallway.

Wallpaper

This is a great solution for those who decide not only to change the door in the hallway, but also to completely renovate the hallway. Decorating a door slope with wallpaper is quite simple, but this requires a flat base. Very often, the same wallpaper is used on the walls as on the slopes. This creates the impression of a monolithic surface. Thus, it is possible to visually expand the doorway and the space of the hallway as a whole.

One-sided sandwich panels

These panels are a sheet of polymer plastic, on which a layer of extruded polystyrene foam is glued. It has a fairly dense texture, which has excellent soundproofing properties and acts as great option for insulation. Thus, you will not need to additionally insulate the doors and take special measures for soundproofing.

These panels are very light weight and therefore they hold well on the door even with special glue without additional fasteners. In addition, their design can be very diverse, there are even wood-like models and products that imitate other materials and surfaces.

Plastic panels

This is a fairly easy-to-install option, which differs interesting decor. Plastic panels are somewhat similar to the previous version, but they are less reliable and thinner. If the slopes are deep, then plastic laying is not recommended.. This is due to the fact that it can be easily deformed and damaged. Plastic panels will not give the same rigidity throughout the door slope. But their undoubted advantage is an interesting and varied design.

Among the plastic options, vinyl panels are very popular. They are pretty reliable. In addition, if this element of the door structure is sheathed with vinyl, it will respond well to temperature changes and air humidity levels, which is typical for areas near the front door. Therefore, they are often used for sheathing slopes.

MDF

This is a very durable material that is resistant to external influences. It perfectly withstands various impacts and there are practically no scratches and other point damage on its surface. Externally, this material is similar to wood panels, so it looks very elegant. In addition, MDF is very easy to install and can be installed on almost any door slope. These models look best on wooden products , but there are also models for metal doors.

parquet board

This natural quality material perfect for decorating door slopes. Usually it is chosen for wooden doors or the color floor covering. It is important to choose the most appropriate tone, texture and relief. Thus, this composition will look very beautiful and harmonious. Manufacturers represent a huge number of types of parquet boards that can outwardly match any wooden door, wenge models are especially beautiful.

Laminate

Another option that is perfect for finishing slopes. It can imitate a door pattern, so it is perfect for models from natural materials. They can repeat the pattern of any other materials, including stone, marble and other finishes. Thus, it can be matched to almost any type of door leaf.

Since laminate is often used as a floor covering, it is distinguished by its strength and endurance, so the slopes will last a very long time.

But there are a number of materials that are used to insulate the door frame. For this, foam, penoizol, metvat, as well as other materials are used. But in the case when the width of the slopes is small, it is quite difficult to make insulation, so sandwich panels are perfect. For finishing wide doorways frame slopes are often used. When installing thin sheets, such as plastic panels, often use insulation - polyurethane foam, sealant and other materials, acting as a heat barrier.

What drywall to use?

Any drywall is a layer of gypsum between two strong cardboard sheets. This is one of the easiest materials to install. They allow you to level the surface without putty and primer. Even a novice in this business can handle the installation of drywall sheets.

In addition, this design of the slopes allows you to get rid of excess debris that could arise when using a different method of finishing. In this case, the slopes are perfectly smooth and even, which gives room for imagination and their further design.

For the design of slopes at the front door, it is important to take not standard models, but materials that differ in quality and water resistance. It well withstands the increase in air humidity characteristic of the hallway. To ensure greater safety, it is better to give preference to sheets with the addition of fiberglass, since such material is non-flammable and provides insulation for the entrance structure.

How to close up for a metal sheet?

To finish the slopes at the metal entrance door, the frame method is most often used. To create a base, you need to use metal profiles. Finishing with wooden bars is also acceptable. It is important that the canvas adheres tightly to the surface.

To strengthen the metal door frame, you need to install a lintel on the supporting part of the structure. Their installation at the corners of the structure is especially important. At this stage, you can lay cables and other wires. After that, it is necessary to fix the selected canvas with screws or nails.

It is also very popular to seal the slopes of metal doors with a cement-sand slope. But for this it is necessary to level all the slopes with a primer and place emphasis on the subsequent installation of finishing materials. For metal structureit is important to take into account the thickness of the solution layer and the thickness of the finishing material so that such a finish is not too massive and does not violate the overall picture of the door structure.

For sealing slopes approx. metal door drywall works great. This is due to its small thickness and versatility. But this material requires additional insulation.

Finishing after installation

After installing the door, it is important to correctly arrange the slopes in order to ennoble the appearance of the entrance to the house as a whole. This can be easily done with your own hands, the main thing is to correctly align the door slopes from the inside. Highly interesting option finishing after installing the doors is the use of extensions. You can also use the following options.

Natural or artificial stone

It's pretty fancy and beautiful option, which performs a decorative role. It is quite expensive, especially when it comes to natural stone. This method has many advantages, since the material is considered very durable and of high quality. Natural stone is a completely eco-friendly option that is resistant to external mechanical influences.

But cheaper fake diamond is not of the same quality. He has a large number of disadvantages, since it is made on a plaster basis. It is easily damaged and crumpled. In addition, it can easily crumble or warp when exposed to water or high humidity.

Tile

This method of finishing after installing the door is quite complicated. Not all tile options can be used for this. In particular, it is better to avoid glazed models, as they will look very strange and cheap on the door slopes. It is best to give preference to clinker tiles.

This option can imitate brickwork or a natural stone. Therefore, it can be chosen for any stylistic design hallway. It is best to choose not very easily soiled and not glossy tiles. This finish option is good because these surfaces are quite easy to care for. In addition, manufacturers present a wide variety of models for decoration.

PVC panels

Very simple finishing material, which is cheap, beautiful, but short-lived. Some low-quality models can be easily pierced, even leaning on them with an elbow or hitting them hard with a foot.

Decorative plaster

This is a very interesting, but rather laborious installation option. Applying decorative plaster is a whole art, so it is better to entrust this process to professionals. But in the end, the slopes and the space near the door can noticeably change.

All finishing methods are used both individually and in combination with each other. So you can not only decorate beautifully door structure and slopes, but also to make the door more reliable, insulate and protect it from external factors and from breaking.

Mounting and design options

There are two main options for mounting slopes:

• frameless;
• frame.

Before moving on to finishing, you need to make sure that the structure is installed correctly, that the exact parallel between the opposite borders of the door frame is observed and that all seams are sealed. First of all, it is necessary to check the structure for cracks. To do this, light a match or candle and run it along the entire doorway. Where the flame begins to deviate or even go out, it is necessary to additionally insulate the slopes and add sealant.

When all the insulation work has been completed, you need to cut off the excess dried layer polyurethane foam and additionally cover the door frame with masking tape. After that important to get rid of old plaster and loose concrete and brick wall elements.

After that, you need to move on to plastering. First you need to completely clean the wall of construction dust and level it. Then you need to use a deep penetration primer. It will make the base of the frame more durable and even.

It is very important to pay special attention to the concrete lintel on the door. For its processing, it is better to use the so-called concrete contact.

If the surface does not absorb moisture well, then it is also necessary to use a special primer. After the soil layer dries, you will need to install the profiles. But before that, it is better to wait about 8 hours until it dries completely. Profiles are necessary in order to even out the layers of plaster on all slopes.

To do this, it is necessary to mark the position of the vertical line on the side of the door about 3-4 cm with a laser or the simplest level. There it is necessary to drill several holes with a diameter of 6 mm in increments of 30 cm. Dowels are inserted into the holes, and then the level of their caps is leveled with twine. After installing all these items it is necessary to check their correctness and even vertical. By the same principle, it is necessary to install a profile on top and on the opposite side of the doorway.

After completing the installation process, you need to do cement mixture. It is best to use sand and cement grade M150 for this. All these finishing materials must be sieved through a sieve with small cells. To create a high-quality solution, it is necessary to mix sand with cement in a ratio of 3: 1. You need to add a little to the dry mixture clean water and at the same time stir the resulting solution with a special nozzle of a drill.

When the mixture becomes homogeneous and thick, like dough, the solution can be used to finish the slopes. Using a spatula, it must be sharply and quickly thrown onto the wall and ironed, closing the profiles. Thus, you can make a perfectly flat surface without unnecessary deformations.

The panel version without a frame is simpler. In this case, laminate, drywall, sandwich panels, MDF, chipboard and other options are often used. And you absolutely do not have to smooth the surface of the slopes. Finishing is carried out by mounting on glue. It is important that the surface is straight. There should be no defects or irregularities on the surface.

Even if she herself door frame has some defects, they can be corrected using this design of the slopes. In this case, it is necessary to additionally plaster the door exactly in the missing flat surface places. If the original surface is flat and smooth, then the frame method will be very simple. Initially, you need to apply primer to the base where the panels will be fixed.

Then you need to measure all the slopes and select the right amount of finishing materials. On the panels, you need to make all notes and put points. Then you need to connect all the lines and check them with a tape measure and a special square. This must be done very carefully. A sheet of such a panel must be cut into the required number of individual elements and prepared for installation.

As for laminate or parquet, they can be installed both vertically, one for each slope in width, and horizontally, using several short panels. Then, it is necessary to apply glue on the finishing material using the nest method in increments of approximately 15 cm in the shape of a square. All adhesive spots must be dried a little so that a film begins to form on their surface. Only after that it is possible to apply slope elements, but it is important to be very accurate, since it will be possible to align the finishing panels only a couple of centimeters, no more.

Then, starting at the top and moving down, you need to gently press the panels against the wall, but do not press hard on them so as not to push them. This is especially true for plastic panels.

Design and decor

The design of the door slopes is the final touch after finishing them. As a rule, models from MDF and decorative materials do not require additional decoration, since these materials look quite elegant and without additions. This also applies to options with laminate, parquet board and plastic panels. To complete finishing works in this case, platbands are installed and the joints and all joints are masked with the help of special furniture stickers or mastic, which is selected in exact accordance with the color of the finishing materials.

But if the doorway is only plastered, then it is necessary to use other methods of decoration for it. So, paint is used for this, decorative plaster or wallpaper. But before that, the slope is covered with two layers of putty to hide the bumps and get a smooth layer. When finishing with paint, a primer is applied first, and then a layer water-based paint and a bright accent on the layer acrylic paint. So you can interestingly arrange the slope and make it very bright, playing in contrast with the door. This decor looks especially interesting in black and white.

Another option for finishing is wallpapering. But it is better to choose them in the color of the walls in the hallway, so either you need to choose the most similar coating, or finish both the slopes and all the walls with one material. If you have chosen wallpaper only for the decoration of the slopes, then it is better to pay attention to the options without a pattern, as they may look a little strange near the door. This is due to the fact that most doors have a classic simple design.

Wallpaper should completely cover the entire width of the door slope, taking into account the overlap over the corner line, so that you can cut off the excess at any time. Wallpaper can be textured, embossed, and even have an interesting mother-of-pearl tint. They will look very beautiful and elegant. But try to use soft wallpaper for decorating door slopes, which can also be washed and cleaned. This is due to the fact that dust and dirt from the street very often accumulates near the front door.