After planting tomato seedlings in open ground, one of the points of plant care is tying. Tomatoes tie up both tall and short varieties. How to do it right and what material to use for this are questions that concern many summer residents.

A garter of tomatoes gives a lot: the fruits will not break the bush from their weight, the plant will not waste vitality to support their bush, at a height they will not be able to rot from touching wet ground (from watering or rain), they will not be dirty, they will not have to. Tomatoes will grow well, warm up, ventilate, it will become much more convenient, hilling and spraying.

You can tie tomatoes in different ways and with different improvised materials. Use metal or wooden stakes, fittings. For tying tomatoes, it is better to use twine, fabric or unnecessary nylon tights, such material will not damage the stem. The width of the strips is not less than 3 cm. The dressing material must be new every year so that the plants cannot become infected with last year's diseases. Of course, you can remove the material annually and boil it to disinfect it, but do you want to do this? Do not use fishing line, thin rope or wire, they can damage the stem.

How to tie tomatoes

• Stakes, which are deepened by 20-30 cm, moving away from the shoots by 10 cm. The height of the stakes is 1-3 m, depending on the variety of tomatoes. With a thick rope (twine) they tie the trunk of each plant to its support.
• When planting, make a trellis with a vertical support of 2 or 3 m. Deepen the stakes along the edges of the beds and pull the wire between them in the middle and at the top. Ropes are tied to the top line, along which the plants will curl. The lower end of each rope should correspond to a separate bush, securing it to the trunk. You can make several rows of wire horizontally () and tie the bushes to them.

• It is very convenient to use specially made cells for gartering tomatoes. Metal circles are made, which are connected by reinforcement (2-3 pieces are enough). Thus, they planted a tomato bush, dug a cage around the bush to a depth of 20-30 cm, and then just tie it up as it grows.

• From metal stakes (reinforcement) they make caps like a wigwam, like a pyramid, which are also installed when planting. To do this, they dig in a stake and make 3-4 tension wires around. Tomato bushes are planted between the corners of this design. Thus, one such design becomes a support for several plants at once. The distance between such pyramids should be 1-1.2 m.

Having connected the stalk of tomatoes (upper part) with a support, they tie it 2-3 times and only then tie it.

If the strapping is done with twine, then in the form of a figure eight.

When tying tomatoes, do not overtighten the stem, as it develops it becomes thicker, and it can be damaged at the tying point.

There should be some free space between the stem and the support.

As the bush grows, make additional garters, in total they will need 3-6 per season.

The proposed methods of tying tomatoes can be used when growing both in open ground and under greenhouse conditions.

​Related Articles​

What gives a garter

The method of gartering greenhouse tomatoes depends on the height of the plant and its power. The easiest way is to use an individual peg for each bush. Any material is suitable for this - fittings, metal rod, wooden rail or plastic pipes. The length is selected based on the height of the bush plus a margin of thirty centimeters. For this difference, the stake is driven into the ground a few centimeters from the bush. After that, the garter is performed. It should be noted that this option is suitable for medium-sized species. Large bushes with their weight are able to overturn the peg. There is also a minus - as the plants grow, the garter is performed several times.

• The material for tying tomatoes should not cut into the trunk of the plant, should not damage it in any way.
• Seedlings are planted in the ground in May-June, depending on which region you live in. In any case, the risk of returning frosts should be minimal, or be prepared to cover the tomatoes with a covering material.
• For 1 bucket of such a soil mixture, add a liter jar of river sand (and preferably vermiculite) and a tablespoon of ash and superphosphate.
• The tomato tying procedure is a crucial moment in the cultivation of tomatoes, which should not be ignored. Caring vegetable growers use it not only for tall varieties. Low-growing tomatoes with this method of growing get sick less and give excellent yields.
• Growing vegetables is a fun activity. Amateur vegetable growers place a wide variety of crops on their plots. But none of them is complete without juicy and delicious tomatoes. A variety of tomato varieties will require an individual approach to each of them when growing. Low-growing tomato species are compact bushes that do not require special agricultural practices. But how can you resist the temptation of growing large-fruited varieties tomatoes? They have incomparable taste. But at the same time such vegetable crops will require more attention than undersized relatives.
• If the bed is long, then it will be necessary to strengthen the structure by driving in additional intermediate stakes, then no wind will be terrible for your garter. And if you plant 2 beds parallel to each other at a short distance, then the design will come in handy for tying tomatoes from both at once: you will get a kind of tomato hut.
• For low and medium-sized varieties, you can choose materials 20-30 cm above the seedlings, but tall ones will require longer stakes - up to 2-2.5 m.
• With the development of horticulture, the breeding of new crops by breeders and the invention modern materials, appeared and took root in vegetable growing several ways to garter a tomato when grown in open ground. Each of them has proven its effectiveness in practice, so you can safely choose any that is convenient for you and your suburban area. You may even be able to invent something of your own based on them, so let's take a closer look at each option on how to properly tie up tomatoes.

It is also much easier to carry out other procedures for caring for seedlings in the open field: mulching, hilling, weeding, pinching

No matter how strong the stem is, all gardeners recommend tying tomatoes in the open field. Any varieties of tomatoes require timely garters, and especially tall ones - those that reach 2 meters in height. Low-growing varieties are often not tied up at all, but the proportion of their cultivation compared to taller varieties that give a more abundant harvest is constantly decreasing, because everyone is striving for the expedient use of every square meter of land on the site. Therefore, with the same care, labor costs and planting area, high varieties are more rational and cost-effective than their low counterparts.

Ways

A convenient method is to tie a tomato in a greenhouse to a trellis. Strong supports are installed in the bed, on which a wire or a strong rope is pulled. As the bushes grow, their stems are tucked behind the wire according to the principle of weaving. And you can stretch the wire only along the upper sections of the supports, and tie the bushes to it with twine. It remains only to direct the bush as it grows around it, so that it wraps itself around it.

Now, with regard to the stepsoning of tomatoes in the open field ... A lot depends on the region - if you have a warm climate in which the fruits even on stepchildren have time to ripen before the cold weather, then of course you can not stepchild bushes. If the summer is short, it is better to pinch, that is, break out the side shoots growing from the axils of the leaves, or at least pinch to the first flower brush. Read more about this in the article on how to properly pinch tomatoes. When planting seedlings in the ground, the plant is carefully removed from the cup and placed in a prepared hole, which is desirable to spill warm water. The plant is lowered into the hole to the cotyledon leaves and sprinkled around with earth, compacting it a little. Now we pour the prepared soil into the boxes, compact it a little and sow tomato seeds. Sprinkle more soil on top, about 0.5-1 cm. If the sowing depth is less, sprouts may appear with a seed coat on them. (In this case, do not tear it off, but drip it with water and a little later the seed will be removed easily). The soil after sowing must be watered from the sprayer.​

Growing tomatoes in the open field includes sowing seeds for seedlings, growing seedlings, planting seedlings in the ground, caring for adult plants and harvesting.

stakes

There are many varieties of tall tomatoes. They differ in color and size of fruits, which are distinguished by excellent taste. However, growing them is a rather troublesome business. But for the sake of getting large-fruited tomatoes, it is worth working hard. As a rule, vegetable growers grow seedlings of tall tomatoes on their own. For its landing, the land has been prepared since autumn. Tomatoes require well-lit areas with fertile soil. The beds are planned in such a way that it is possible to carry out the necessary agrotechnical measures, during which one cannot do without tying tomatoes. Novice amateur vegetable growers make mistakes when fixing plants.

With a little effort, you can design entire structures for the garter that will last you for a single year. These will be original cells for vegetables. They are built separately for each bush. First, several circles of the same diameter are made of dense reinforcing wire, then they are fixed at the insistence of each other on vertical racks of the same wire. It turns out a cylindrical wire cage, which is installed at the same time as the pegs, and then, as the bush grows, you only need to tie the stem in time.

Each of the pegs should be strengthened in the ground so that it holds firmly, usually deepened by 20-25 cm, retreating from the stem of the tomato by about 10 cm, so that the root system is not inadvertently damaged by you. You need to tie the tomato loosely, it will be right to first fix the string on a peg, then wrap the stem around and tie. As the vegetable grows, we perform this process several times.

On the trellis

​To begin with, we note that any of the methods listed below use materials that do not harm the plant, so follow the tips and you will never have problems growing tomatoes.​

1. Tying a tomato stem will simplify watering, because, based on the correct growing technology, the vegetable does not welcome excess moisture on the leaves too much, so any water procedures it is better to produce near the root.
2. A tomato garter is not a tribute to garden traditions, but a “production necessity”. This simple procedure has a lot of benefits for your future harvest, namely:

The most commonly used method is individual support pegs. Some gardeners install trellises, but in this case the wire is replaced wooden slats, giving it strength and stability in case there is a strong wind.​

​Cultivation garden culture implies knowledge of certain subtleties. Just planting seeds in the ground will not bring anything - you need to make an effort to get results. Tomato bushes are one of the most demanding types of crops; they imply the implementation of measures that contribute not only to improving yields, but also to preserving vegetables. Today we will consider one of these questions - how to properly tie up tomatoes, step by step description, photo.​

Cells

The scheme for planting tomatoes in the open field depends on the planted variety: early ripe tomatoes are usually planted according to the scheme 30x40 cm, late ones - 50x50 cm and on the method of formation of the bush.

To speed up the emergence of seedlings, plantings can be covered with a film. As soon as shoots appear, the film must be removed.

Caps

In this article, we will tell novice gardeners in detail how to grow tomatoes in the open field.
What is the correct tomato garter? Tall plants, depending on the variety, will require pinching and regular stem fixation. The tomato garter procedure is performed 3 to 6 times per season. At the same time, this agricultural technique is performed for each plant individually.

Video "Garter of tomatoes"

If you can’t find the wire, then you can build a similar frame out of wood, fastening the stakes together like a stool, only without a seat. If you make such a cage wide enough, then it is able to cover 4 bushes of tomatoes - for each "leg" of the structure. This is much more reliable than driving in individual pegs.​

plodovie.ru

Ways to tie tomatoes when grown outdoors

If you have a tomato plantation, it would be more rational to use a different garter method. It will require a thin beam or strong pegs, and their number is much less than in the method described above. We drive in the racks at the beginning and end of the tomato beds, we stretch the wire between them. With this method, you will need to tie the stem of the tomato to a stretched wire. You can tie up a plant like this if you planted a tall variety of tomato, and using a stretched wire is available in several options:

The twine, which you will use as an improvised tool in order to tie up tomato bushes, cannot be tightened tightly so that it does not crash into the stem of the plant.

Tying up the stem will keep the fruit some distance off the ground, so your crop won't become a dining room for slugs or mice.

The stem will not bend and break as it grows and under the weight of the fruit, so its vitality will not be used to fight for survival, but will only be aimed at a good harvest.

It is important to choose the right dressing material that will be in direct contact with the plant. It should be strong and of good width. Wire, nylon fishing line, thin twine - all this should be set aside, as the materials will cut into the stem, damaging it.

It should be warned that not all tomato varieties need tying. Shrubs of low growth and quickly ripening do without it, but tall species need a garter.

Tomato care includes timely watering, weeding, top dressing, garter, pinching and, if necessary, disease control.

fb.ru

Growing tomatoes outdoors

Boxes with seedlings should stand in a very lit place. If the seedlings begin to stretch, then it does not have enough light. In this case, fix additional lighting above the landings, by 1 square meter 1 fluorescent lamp per 40 W is enough. If there is no way to hang the lamp, you can compensate for the lack of lighting by applying potash fertilizers.​

The approximate planting time for your tomato variety is indicated on the seed bag, and you can find out the most favorable dates for this if you look moon calendar for gardeners.​

Spring planting of tall tomato seedlings differ from low-growing varieties. Bushes of individual species can reach 1.5 meters in height. Therefore, plants are planted at a distance of 1 meter from each other. After planting tomatoes, they select material for tying tomatoes.

Unusual designs and convenient designs of a different kind - caps. They are suitable for tying not only a tomato. The bottom line is that you need to build a tall narrow "wigwam" or a pyramid from improvised means.

Pull a strong wire onto a high beam at a level of about 2 m - then the strings for the garter should be long enough to reach both the support (wire) and the stem. Tomato lashes will wrap around these ropes as they grow;

For fastenings, any fabric torn into strips, twine or other type of rope will do. Wire or fishing line will not work at all, because it can cut deep into the stem and irreparably destroy it.

Excessive soil moisture will not harm the ripening of the fruits if they are not located on the ground, so the garter will keep the vegetables from rotting on the branches.

With a vertical arrangement of the tomato bush, it will be as open as possible to the sun's rays and fresh air, so it will develop sufficiently, because the plant loves the sun and will give an excellent harvest.

When performing pinching of bushes, this is best done when they are tied up. Plants of high growth also need a garter because an abundance of fruits can break the main stem of a bush.

Watering tomatoes should be carried out on average once a week, but this is very dependent on the weather, this is the difference in growing tomatoes in a greenhouse and in open ground - it is impossible to control watering.

Planting a tomato in open ground

When the plants have two true leaves, the seedlings need to dive (seed), that is, carefully remove the plants from the common box and plant each in a separate cup - the roots need more space to grow. First pour an incomplete cup of soil, better later add it as the plant grows, so that additional lateral roots form on the stem.

In any case, tomato seedlings are planted in the ground at the age of 55-60 days. Estimate approximately when the last return frosts in your area, subtract 60 days, add 5-7 days for seedlings and get an approximate time for sowing seeds for seedlings. Usually this is the end of February - the beginning of March.​

This will require, first of all, twine, which should be quite soft and elastic. Wire or fishing line should not be used for this purpose. They can damage plants. Tomato garter pegs should be of sufficient height, fairly strong. Usually these are wooden or metal pegs that can be used for several seasons in a row. The material for the garter of tomatoes is ready. As the plants grow, they begin to fix them. You shouldn't be late with this. Bushes that touch the ground are prone to diseases and, as a result, lag behind in development and bear fruit poorly. This will lead to crop loss and a decrease in the quality of vegetable products. The garter is made immediately to permanent pegs that will serve the plant all season. Fixing a tomato bush is easy. A support is installed near each bush. It must be strong enough. The fixation of the plant should not be rigid, and take into account the fact that as the tomato stalk grows, it will thicken. Tomatoes are tied with a soft rope or fabric ribbons. Twine several times (in the form of a figure eight) wrap the stem of the plant and the peg. Then it is fixed on a peg. A free loop is formed between the plant and the peg, which does not interfere with the growth of the plant. As they grow, they carry out repeated garters of tomatoes.

Caring for tomatoes in the open field

It can be wire, vine or stakes in a cross-knit warp in the form of a cage. Install similar caps along with planting seedlings, and they are useful for tying several bushes at once. Such pyramids should be placed at some distance from each other so that there is no crowding of plants, usually it is 1 meter or a little more if the site allows.

Stretch several rows of wire, fixing them on the beam. Then each bush will need to be tied up separately several times to the formed stretch or skip the stem as it grows through horizontal stripes so that the braid comes out of the tomato.

Natural fabrics are good, but not entirely acceptable for open ground, because. can rot and fall off, but even worse, become an incubator for a pathogenic infection. Therefore, we will choose something synthetic, but not too thin to tie up the stem. By the way, you can use materials for gartering grapes. In any case, the rule applies: you choose the garter material for one year, and then throw it away so as not to transfer a possible infection or disease to new seedlings next year.

Garter tomato in the open field

Precisely, based on the above good points tomato garters, experienced gardeners never forget about this stage of growing a vegetable.

Inevitable rains and downpours will not be able to damage the tomato in the open field if it is securely fixed on an additional support.

​If you have chosen a garter material that you hope to use for several years in a row, do not forget to disinfect it with boiling water to evaporate pathogens that have accumulated in the fabric in the previous season.

tomatland.ru

How to tie up tomatoes step by step description, photo | Merry Harvester

The need for this event

1. When the seedling take root better just mulch the soil with straw, so it will be much easier to keep the soil moist, and weeds hardly grow. There is no crust under the straw and therefore loosening is not required. A sort of lazy way of growing tomatoes.
2. A couple of weeks before planting seedlings in open ground, they begin to harden it. If possible, move it to a cooler, but not cold, place. Reduce watering.​
3. The soil for growing seedlings can be taken purchased, already prepared, or you can prepare it yourself. To do this, mix 1 part of sod land, peat and humus.
4. No less effective is the trellis method of growing tall varieties of tomatoes. To do this, a trellis is built along a row with planted seedlings. Metal stakes are installed on both sides of the row. Several rows of twine are fixed on them at different heights. Growing plants will be securely fixed on such a trellis.

in the greenhouse

A record of how easy it is to tie up tomatoes with a dense thread without harming the plant.

In any garden culture there are subtleties and rules for growing. It is impossible to grow something in your garden without putting any extra effort into it, just by sowing the seeds in the ground. Today our attention is rewarded with tomatoes. As we know, tomatoes are a very complex garden crop that requires a lot of care to get good harvest. In this article, we focus on how to tie up tomatoes in a greenhouse.

So, you should first figure out why, in general, do you need a tomato garter in a greenhouse? It should be noted right away that not all varieties of tomatoes need a garter. These varieties include undersized and early maturing species. However, these tomatoes are rarely grown in greenhouses, more common are taller and more fruitful tomato varieties.

Some gardeners argue that, in principle, a garter is not needed for a tomato, they argue that nature itself should bring a quality crop without human intervention. However, this belief is wrong.

Let's figure out why, in general, tie up tomatoes?

• All tomatoes need to remove stepchildren. This prevents the consumption of excess plant strength. It is most convenient to do this when the tomatoes are tied up. This process will be described a little later.
• If the tomato variety is tall, then there is a high probability that the plant will not support its weight and will break.
• Fruits that lie on the ground are attacked by various pests. This will not happen with tied tomatoes.
• Tomatoes need to be watered at the root. It is much easier to do this when they are tied up.

Now you can make sure that if you do not tie up the tomatoes, you can, in principle, lose them.

How to stepson tomatoes in a greenhouse

Every gardener who decides to start growing a tomato should know everything about the process of stepping this beautiful garden crop. During growth, side shoots are formed in this plant, which are called stepchildren. If you do not remove these stepchildren, they will begin thrive, turning your plant into a bush. In this regard, all the forces will be spent on greenery, which will lead either to a small harvest, or to the absence of fruits in principle.

The process of pinching is also called the process of forming a tomato. The tomato must be formed so that it has time to release about 7 fertile brushes. This process helps to accelerate growth and increase fruit. Stepchildren should be removed every 10–12 days, while shoots should not be allowed to grow up to 5 cm. It is very simple to do this, stepchildren need to be pulled down until they break themselves. It is best to do the process in the early morning. And, most importantly, remember that without pinching your plant will not bring a quality crop.

Some rules of quality pinching:

1. Deletion in progress with bare hands without using additional tools. This is most easily done when the shoot reaches 5 cm.
2. As mentioned earlier, the formation is done in the morning.
3. During the entire summer season, stepchildren should be removed.
4. In order to speed up the ripening of fruits and improve the air exchange of the plant, you can remove lower leaves. However, no more than 3 leaves can be removed at a time, otherwise the tomatoes will undergo deformation.
5. Between 9 am and 11 am, you can shake the plants, this will help pollination. After shaking, moisten the soil.

How to tie tomatoes

It's time to still learn how to tie up tomatoes in a greenhouse. All we need is long wooden or metal stakes, wires, and ropes that the plant will use. tie to the rods. The rope should be torn into strips, and its total width should be about 2-3 cm. You can use old clothes, sheets and more.

In order for the same material to serve you for many seasons, after each harvest you to be disinfected using boiling water and laundry soap.

Since gartering a tomato in a greenhouse has become commonplace, you can find entire sets of tools for this in many stores.

If your greenhouses are designed for growing a large number tomato for sale, it would be nice to get a garter. This device works in much the same way as a regular stapler.

So, now let's get acquainted with the process of gartering your crop in a greenhouse. There are many different ways garters, which depend on many factors of plants: their power, height, yield, variety. Worth choosing The right way so as not to harm the crop.

Tomatoes are very useful fruits for any organism. To get a quality and rich harvest in your greenhouse, you should know how to properly care for your garden to avoid any kind of crop problems. Garter and pinching - the most important processes that need to be done with your plants, otherwise the crop may turn out to be small, of poor quality.

Support material

In order not to change the props every year, choose them from durable materials. They must support the weight of the fruit and not break.

Wood. Rotting-resistant acacia and chestnut will serve you for a long time. Lightweight and durable, it has many branches from the main twig. This will help keep the rope from slipping while tying.

Bamboo. Lightweight and durable, it is ideal for creating support structures. But only it is too smooth and the ropes can slip off it.

Metal. Very convenient to use steel reinforcement. It is durable and the garters do not slip on it. The disadvantage is the rust with which they are covered and do not look aesthetically pleasing.

Types of supports

Straight rods or stakes 1.5-2 m long. Suitable for tomatoes formed in one trunk. It is convenient to tie the stem with a rope to the support as the plant grows approximately every 30 cm. You need to tie it to the support with a soft rope and not tight, so as not to damage the stem. The rods must be deep enough into the ground so that they do not lie under the weight of the fruit. Rope garters in the greenhouse. It is necessary to tie the rope to the roof bar of the greenhouse and to the base of the tomato trunk so that it is not stretched. As the plant grows, wrap its stem around this rope. The rope will need to be tightened, so don't make double knots, tie it into a bow. This type of support can also be used in open ground by installing a crossbar over a row of planted tomatoes, to which the stems are tied with ropes.

Tapestry from rods. Set the stakes in a row and firmly tie the crossbars between them at different heights. It turns out a lattice of rods, to which you can tie not only one stem, but also heavy branches and bushes formed into 2-3 stems.

"Hut" of rods. For those planted in two rows, install a support for each plant at an angle to the adjacent row. Tie the tops of these supports. For even greater strength of this structure, install a horizontal crossbar on top of these supports.

"Cage" for tomatoes made of wire mesh. Allows tomatoes to grow inside the round mesh without being tied. The diameter of the "cage" can be adjusted as the tomato develops. It can be covered with a covering material when it gets cold. The support method is very developed in the USA. Very convenient, but expensive way. For each plant you need to purchase at least 1.5-2m. nets 1.5 m wide. The mesh must be fastened to the ground with small pegs and tied in height with wires.

Tomato bushes, even undersized, it is desirable to grow using a support. Exists
many solutions for the construction of such supports. Find out how to not only make growing tomatoes easy, but also improve the design of your garden.
Tomato bushes need to be removed from the ground in order to:
- avoid getting sick
- make harvesting easier
- the fruits were clean and did not lose their presentation
- Simplify pollination and plant care.

Wooden boards are a simple and inexpensive solution. You will need to tie them to a support. Be sure to use multiple planks to support your tomatoes well.

There can be many support options for tomato bushes, below are a few fairly simple and convenient ones, you can choose one of them.

A well-made cage, such as this welded one, can be a sculptural element in a garden, as well as a structural support for tall tomatoes.

Stakes

This simple support requires only a little force to drive it into the ground near each bush and then fasten it to the stake as the plant grows. Supports for tall varieties should be 1.5-2 meters in height. It is advisable to support such high supports with a shorter peg or dig deeper for stability. You can buy wooden, plastic, and bamboo stakes for this purpose, or you can make your own from tubing or other suitable materials.

This cage is made of reinforced concrete mesh.

It is necessary to install such a support next to the bush when you plant it in the soil. If you want to wait for the bush to grow, don't wait too long, because you can damage the roots by placing a peg. Tie the main stem to the support loosely with a soft rope so as not to damage the plant. Knitted stripes are ideal for this purpose.

Create an original center point in your garden by installing a tall tomato teepee support. Extra-long pieces of bamboo are used for support.

Stakes are set at a distance of 60 -100 cm from each other, depending on the size of the bush of your tomato variety. Stakes are easy to remove at the end of the season by simply pulling them out of the soil.

Bamboo slats are long enough to support tall tomatoes such as this variety.

tomato cells

Plants growing in a cage do not need a tie because the sides of the cage support the stems. You can buy ready-made wire cages, although these are often not large enough for tall varieties.

This a good option for small tomatoes

You can make a large tomato cage that will last for years. Such a cage can be quite simply built from a ready-made lattice fabric, such as pasture fencing mesh. To arrange the cage, you just need to cut off a piece of mesh right size and roll it up to make a cone. The edges can be fastened with wire, and the cage is ready.

Set up a cage around the plants shortly after planting, while the plants are still small. This will ensure that you do not damage the roots.

First you need to plant a tomato bush, and then install a cage around it.
Set the cages at least a meter apart, depending on the size of your tomato variety. Cages are easy to remove at the end of the season.

In this garden, metal spirals hang down from a metal frame. Quite an original example of a support for tomatoes.

wire grate

Wire grating is a combination of the above two methods. To install the grate, you need to dig or drive stakes into the ground at a distance of about a meter from each other. Make sure they are driven in deep enough and properly secured to support the weight of all the tomato plants when they are ripe. The height of the stakes must be at least one and a half meters. After installing the support stakes, attach the net to them.

The rustic prop is made from ordinary tree branches.

Plant the tomatoes along the trellis at a distance of 60 cm to one meter from each other. Direct the stems so that they continue to climb up the lattice on their own, tie them up from time to time when necessary. The trellis can stand in one place for several years, and you can alternate tomatoes with beans and cucumbers to avoid insect and disease build-up problems in the soil. Unlike the other two support methods, wire mesh is not mobile and is not easy to dismantle.

The dug-in poles with a wire mesh stretched between them form this tall and strong tomato trellis.

Permanent supports

Some gardeners install permanent trellises from rebar welded into a tall rectangular frame. It is heavy enough to be dismantled at the end of the season and stays in place like a sculpture, even in winter.