Ariston water heater control buttons. General information on Ariston water heaters

18.10.2019

It is difficult to imagine a normal comfortable life in an apartment or a private house without hot water supply. However, even when district heating it is not always stable. Therefore, water heaters have long ceased to count high technology and especially luxury.

Among the many firms tirelessly fighting for the market in Russia, the Italian Ariston has achieved particular success. Benefits of its products:

Range breadth(more than 70 models);
Excellent quality components. The company uses special protection against corrosion. Magnesium anodes are mounted even in cheap models of water heaters. The kit is always supplied, and environmentally friendly material is used as a heater.
Ease of device control. Budget options equipped with mechanical temperature control, more expensive digital blocks. But at the same time, each boiler has a built-in controller that optimizes the selected mode.
A fairly low price makes a water heater 80-100 liters affordable for almost anyone even the most needy person.
Simple service. The process of assembling and disassembling the heating unit is greatly facilitated.
Excellent heat resistance. In the off state, the boiler cools down by no more than 12 degrees per day.
Good heating rate. 30 minutes after turning on the device in the network, you can already use warm water.

This is just a small list of the advantages of the Ariston campaign boilers. Below, using the example of a model with a volume of 80 liters, we will analyze the device, installation, repair and operation of this device.

Water heater devices

Why exactly 80 liters? Very simply, according to statistics, this volume is considered the most popular among the population. This amount of water is enough for an average family of three.

How is this device arranged? Today, the boiler is required not only to heat the water, but also to keep the set temperature as long as possible.

As a rule, the 80 liter unit has a flat shape, but can be round. Inside is a stainless steel tank. In the middle is a heating element (). Next to it is a magnesium anode that protects the device from scale.

Also inside are a short tube for supplying cold water and a long one (almost to the top) for hot water to exit. This is to ensure that hot water does not flow until the tank is full. Thanks to this, the heating element will always be in the water.

On the front side the boiler is a thermostat, and below the thermostat and exits under the water. The space between the outer shell and the inner tank is filled with heat-insulating material. When buying in a store, a valve and fasteners are included with the water heater.

There is a thermostat on the front side of the boiler, and a thermostat and water outlets on the bottom

Instrument selection

How to choose the most suitable device for your apartment? Let's say you decide on the volume, deciding that 80 liters is enough for you. You need to decide what price you are willing to pay for this pleasure. Budget boilers are no worse than expensive ones. Maybe not so beautiful with less precise settings, but Ariston gives a guarantee on all its models.

Next, we define the form. It all depends on where you are going to hang it. You can take round or flat. Perhaps, if there is absolutely no free space on the walls, the only option would be a horizontal water heater.

Decide on power. Ariston is economical, so it rarely puts too powerful heating elements on its products. Of course, if you want the device to heat water faster, it is better to buy a more powerful device, for example 2.5 kW.

If you want to save money, take a 1.5 or 1.2 kW device. Heating will be slower, but save on electricity. Naturally, it is necessary to do what we do with any product in the store - check its integrity with the package. Do not listen to the excuses of sellers like “the dent is small, it’s okay”, you will live with this device for a long time, demand a replacement.

Budget boilers are no worse than expensive ones. Maybe not so beautiful with less precise settings, but Ariston gives a guarantee on all its models

Installation and connection of the boiler

Installing a water heater is not particularly difficult. If you wish, you can do it yourself, but it is better to entrust this operation to a professional. If you still decide to do it yourself, let's immediately discuss the issue of electricity.

Important: no extension cords with adapters. Only a separate socket. Do it yourself if you can. No, call an electrician you know and run a separate line from the switchboard. The socket must be in a safe and dry place.

Step by step:

We decide on a place, drill holes for fasteners and hang the heater. All this is best done with a level to avoid unnecessary distortions.
Next, you need to embed the tees into the wiring pipes. If they are metal-plastic or polypropylene, then there will be no problems with this. What to do when the pipes are metal? There are two options here: either use a grinder and a klupp (threading machine), or connect to a mixer.
Holes were drilled, the apparatus was hung up, tees with layering were cut into the pipes. It is imperative to put a valve on the cold water supply in order to be able to shut off the water to the boiler.
We fasten the valve to the cold water outlet (it should be included). Do not forget to wrap flax or fum tape on the thread. The valve has a dual function. On the one hand, it discharges water at high pressure, on the other hand, in the event of a shutdown, it does not allow water to flow out of the apparatus and thus leave the heating element dry (which is unacceptable).
It is advisable to put a tee with a tap above the valve for. This will make your life much easier if you decide to remove the unit one day. We wind American women onto the valve and the hot water outlet. Why exactly them? The reason is the same. If you decide to remove the device for repair or replacement, you will not have to suffer with the connections, the Americans are easy to disassemble and assemble. We connect the pipes from the pipes to the boiler.
The launch is as follows. Without turning on the water heater, open the cold water supply. Do not forget to turn off the valve on the hot water pipe leading to the riser, otherwise you will supply heat to all your neighbors. We open hot water in the bathroom in order to release air from the boiler. As soon as water confidently comes out of the tap, you can turn on the water heater.

Now briefly about how to connect the device to the mixer. It's easy to do. It is necessary to find a pair of tees, in which on both sides external thread, and with one internal. Carefully remove the mixer. We unscrew the eccentrics from the nests. We screw tees in their place.

The external threads in the middle must point upwards. We screw valves on them. In internal thread screw the eccentrics and put on the mixer. We hook the water heater to the valves. The convenience of this option is that you do not need to do a sidebar. This method is used for metal wiring.

Do not forget to turn off the valve on the hot water pipe leading to the riser, otherwise you will supply heat to all your neighbors

Rules for using the device

There are several general rules, following which you can significantly increase the life of your device and avoid many problems. Here are some of them:

Read the manual carefully by use!
Turning the device on and off too often can damage it. electronic stuffing. Here it is better to be guided by the principle of "turn on and forget".
Be sure to turn off the hot water supply to the apartment before turning on the device.
At least once a year it is necessary to carry out preventive maintenance(clean the heating element, anode, tank from scale).
Do not turn off the device during heating. This can significantly shorten its service life.
Do not turn on an empty boiler. There is a high probability that the heating elements will burn out without water.
If you are going to leave home for a long time, disconnect the water heater from the network!

Turning the device on and off too often can harm its electronics.

How to disassemble the boiler. Boiler cleaning

If your device began to slowly heat water or stopped heating altogether, the problem may be scale and it's time to clean the heating element or change it (if it burned out). Fortunately, the device of these models easily allows you to get to the heater and other insides of the tank.

Here's how it's done:

Turn off the device from the network (mandatory);
Shut off the water supply;
Drain the water (for this we put a tee with a valve above the valve);
We turn out two screws, remove the protective box;
Unscrew the nut securing the flange with a wrench;
Carefully remove the old heater together with the anode;
We clean the tank, the heating element with the anode from scale (replace if necessary).
We assemble in reverse order. Replace gaskets if necessary.

As you can see, there is nothing complicated. We hang the device in place, fill it with water, turn it on, check it.

Price

The Ariston lineup is very diverse. We also observe a wide range in terms of the cost of devices. From economy class models to very comfortable ones. Let's look at several samples from the 80 liter line, but at different prices.

Let's start with the humblest:

Ariston SUPERLUX NTS 80V price 5,650 rubles. tubular heating element, Maximum temperature 75 degrees, power 1.5 kW, number of heating elements - 1. Mechanical control, heating time 186 minutes. The inner coating is enamel. Maximum pressure up to 7 atmospheres.

Now consider a more expensive model:

Ariston ABS PRO ECO INOX PW 80V price 11,046 rubles. Temperature up to 80 degrees. Power 4 kW. Number of heating elements - 2. Electronic control(buttons). The inner lining is stainless steel. Protection against switching on without water and protection against overheating. Accelerated heating of water.

As you can see, there is a difference. Let's see an even more expensive model:

Ariston VELIS INOX 80 l price 22,990 rubles. Inner tank - stainless steel with special protection. Super fast water heating. Protection against: electric shock, switching on without water, power surge, bacteria. Ultra-precise temperature control. Automatic error diagnosis. Improved magnesium anode. Electronic control. Polyurethane foam insulation. Power 1.5 kW.

Here is such a difference. If any of the listed data is important to you, you can pay extra and buy yourself a more expensive device. If not, then the budget model is quite suitable for you.

Today, Ariston water heaters are one of the most popular on the market. In particular, the 50 liter models are in particularly high demand. Such water heaters have small dimensions, so they can easily fit in any room. Ariston water heaters are easy to operate, maintain and have a long service life.

Peculiarities

Ariston heater able to heat water from +30 to +85 degrees. An interesting feature of this product is that such a water heater has an extremely pleasant and convenient design that can fit into any room, and constantly provides a home hot water. Many models also have an energy saving function - the water automatically heats up to a temperature of +50 degrees. Of course, you can increase this figure if you wish. Also, Ariston 50 liter boilers can automatically turn off when there is a power surge, which helps prevent damage to the unit. AT modern models it is worth noting the functions of accelerated heating and water filtration.

Kinds

Among the main models of Ariston water heaters, there are several types.

Water heaters accumulative type. Two tubes and power supply are connected to the storage heaters. The first tube is designed to supply cold water to the boiler. After heating it, it exits through the second tube. Typically, 50 liter models are mounted - they are attached to the wall. Water in these types of boilers is heated by electricity. Thanks to the thermostat, the storage electric boiler automatically turns off after the liquid is heated to desired temperature. Users marked storage boilers Ariston VLS, which, among other things, are flat. They are extremely compact, so they do not take up much space.

Boilers of gas type. Gas models differ in that they heat water not at the expense of electricity, but with the help of gas. Otherwise, the device and the principle of operation are similar to storage-type water heaters. It should be noted that the gas boiler is usually made of steel and is additionally covered with a layer of titanium enamel, which allows both to increase the reliability of the water heater and reduce heat loss.

Water heaters with indirect heating. They carry out heating of water by means of the coil installed inside. It is noted that these models heat water faster than all previous ones. But usually they are quite large and have big weight, but able to heat a large number of water (150-500 liters). Such volumetric models are not recommended to be fixed to the wall, but placed on the floor. The floor water heater has a very durable coating that increases its service life.

Among other types of Ariston boilers, it is worth noting flat devices. These compact models have minimal dimensions, they can be placed anywhere. Despite their small size, these boilers are quite powerful. This option organically fits into the room of any size and does not take up much space. And also the manufacturer offers customers rather unusual boilers that can be positioned horizontally. Horizontal models can be placed in a specially designated niche, thereby completely hiding it, which allows for even greater savings in usable space.

Popular Models

It is worth highlighting some of the most common models of Ariston boilers.

Ariston Velis Inox. This model has horizontal and vertical variations. Stylish design and a flat body make the boiler a rather attractive technical device that does not take up extra space.

Ariston ABS VLS. This option is almost completely automatic. The device has various systems that monitor the temperature and protect the heating elements from overheating.

Ariston ABS PRO. This type of water heater is cylindrical in shape, which allows you to place it in the corner of the room. This version of the boiler is one of the most budgetary.

How to connect?

Usually, the installation and connection of Ariston 50 liter boilers does not cause great difficulties. Each device is accompanied by an instruction manual. Therefore, installing a boiler is a simple matter and can be done with your own hands.

Installation of a mounted boiler is carried out as follows:

measurements must be taken on the wall, including determining the height of the unit;
then a pair of holes should be made with a puncher, which should be approximately 10 cm in depth;
for fastening the boiler, strong anchors are used that can withstand the heavy weight of the structure;
then the boiler is simply hung on the anchor with a special mounting plate, which is located behind the body.

One of the main points when installing a boiler is to correctly connect and carry out the first start of the device, using rules such as:

first you need to open the valve to supply cold water to the boiler;
then open the mixer, from which hot water should flow; most likely, at the first start it will produce loud and intermittent sounds, but do not be afraid - this is normal for the first inclusion;
then you need to wait a bit until the boiler carries out a set of cold water to heat it;
after filling the boiler and heating the liquid, the water from the tap must flow stably; it is advisable not to immediately set a large temperature regime;
After the first start, the water temperature can be easily adjusted using simple commands on the water heater.

Faults

Even the most reliable equipment is not immune from accidental breakdowns. No matter how high the characteristics of the device, it can still fail. Various factors can influence this. Water heaters are usually characterized by breakdowns of water heating elements and thermostats. In order to avoid damage to the heating elements, it is recommended to carry out preventive maintenance and cleaning of the heating elements at least once a year. A long period of water heating, extraneous sounds during boiler operation, or more frequent spontaneous shutdowns can serve as an indicator of a malfunction. Boiler repair can be done independently; To do this, you need to disassemble the unit and determine the location of the breakdown.

In order to eliminate the malfunction with your own hands, you must follow certain steps.

To begin with, it is worth disconnecting the device from the mains, and then completely drain the water from it. To do this, you can use a hose that connects to a special hole for discharging water.
Shut off the flow of fluid into the boiler. After draining the water, you can begin to inspect the parts of the water heater.
Often breakdowns occur precisely in electric heaters, so you should immediately inspect the heating element (heater).
With prolonged use, any heating element is covered with scale. Therefore, it should be carefully removed, while you can use special tools.
If replacement of any components is necessary, then it is necessary to purchase only original parts by contacting the official manufacturer.

In some cases, a water heater tank may leak. In this case, you need to carefully examine the body of the product. It is possible that the problem lies in a leaky gasket, which should simply be replaced with a new one. But if the heater tank is leaking due to a crack or chip, then it is unlikely that it will be possible to eliminate this malfunction by independent forces. You can try to use the soldering method, but this is unlikely to help on long time. If the housing is damaged, corrosion in the heater begins to occur faster, and heat loss begins to increase.

Therefore, the installation of the heater should be carried out very carefully so as not to accidentally damage the housing. If such a problem still occurs, then best solution will contact the service center.

After analyzing customer reviews on the use of Ariston boilers, it should be noted that most of the owners are satisfied with the purchase, because the operation of such a water heater does not cause serious complaints. Buyers appreciated the stylish appearance, compactness and simplicity in management of a water heater. And also, a low level of heat loss, low electricity consumption during the operation of the boiler were separately noted. In general, the owners of Ariston boilers noted good value for money, as well as professional service in specialized services.

As negative points periodic breakdowns of the water heating element were noted. Usually manufacturer Ariston gives a guarantee for the heating element up to one year. Some owners of boilers have had breakdowns before. But the performance of this element depends on many factors - frequency of use, water hardness and others. And also among the negative aspects, it is worth noting the lack of elements for mounting some wall-mounted boilers in the kit. These brackets must be purchased separately.

The Ariston water heater is designed according to the latest technologies The Ariston water heater is designed according to the latest technologies, has not only a high-quality water heating tank, but also good technical characteristics. The main advantages of such a boiler are durability and reliability, intuitive control and convenient operation. Each device is necessarily supplemented by a detailed instruction manual, which allows not only to independently install and connect the water heater, but also to perform simple repairs with your own hands.

- 1. Electric water heater Ariston: technical characteristics of boilers for 50, 80 and 100 liters
- 2. Water heater Ariston: installation (video)
- 3. Gas boiler Ariston
- 4. Boiler Ariston: device and principle of operation
- 5. Operating instructions for Ariston water heaters
- 6. Overview of the Ariston water heater (video)
- 7. Do-it-yourself Ariston boiler repair
- 8. Repair of the water heater Ariston (video)
- 9. Reviews and comments

Electric water heater Ariston: technical characteristics of boilers for 50, 80 and 100 liters

Ariston produces more than seventy models of storage water heaters with a capacity of 10-200 liters. Cumulative electric water heater It is represented by several models, among which the 50.80 and 100 liter series are especially popular.

	Volume (liters)	Heating time up to 45°C (min)	Protection class IPX	Dimensions (mm)
ABS VELIS INOX QH D





ABS PRO ECO INOX POWER SLIM

ABS PRO ECO INOX POWER





ABS BLU ECO POWER SLIM

Water heater Ariston: installation (video)

Gas boiler Ariston

Price gas equipment depends on the principle of the water heater and its type. Each boiler is arranged, as a rule, of the same type, but it also has some features:

DGI water heaters have electronic ignition and manual power control. Characteristic is the natural removal. The gas water heater has a concise rectangular shape;
Fast-CF does not need additional power supply, and copper is used for the heat exchanger, which can significantly reduce heat loss;
Marco-Polog7s features a closed combustion chamber for added operational safety. There is a touch screen and modern design, which makes the model the most popular among consumers;
Marco-Polo M2 is a model with a combustion chamber open type and a smoke exhaust fan. There are a couple of stages of device protection that prevent overheating and guarantee high performance safety and long service life.

Before installing the device, you must familiarize yourself with the principle of operation of the Ariston water heater, as well as study the instructions with detailed instructions individual features installation.

DGI water heaters have electronic ignition and manual power control

Boiler Ariston: device and principle of operation

The manufacturer uses proprietary protection against corrosive changes. Everything budget models equipped with a mechanical regulator, and each expensive water heater is equipped with a digital control unit. An internal temperature controller works inside the water heater, which allows you to optimize heating. The device and principle of operation of such equipment are as follows:

an internal tank or boiler designed to receive cold water and framed by an external casing.
built-in heater designed to heat incoming water;
a heat-insulating layer located between the body of the water heater and the boiler, which performs the function of a kind of thermos and allows for a long time to maintain the temperature indicators of heated water;
a shortened branch pipe equipped with a divider for water supply;
outlet pipe;
built-in magnesium anode to prevent strong sedimentation in the form of mineral salts on the walls of the inner surface of the tank.
thermostat designed to automatically interrupt the power circuit after heating the liquid to the specified temperature.

The device and principle of operation of Ariston boilers are relatively simple

Control of the operation of water heating equipment is carried out by means of a voltage indicator, and with the help of a built-in thermometer, you can monitor changes in temperature indicators.

Ariston water heater user manual

Convenient connection of water-heating equipment from the company "Ariston" consists in the use of manufacturers of an autoclave special flange mechanism. The basic principle of operation of such a mechanism is based on pressing the gasket under the influence of water pressure. As a result, it is possible to completely eliminate not only the leakage of liquid, but also the formation of watery smudges. To avoid excessive heat loss, fastening electrical models water heater from the company "Ariston" is carried out in close proximity to the point of output.

Overview of the water heater Ariston (video)

To install wall models, the equipment is fixed with anchors or bolts. Optimal standard diameter fastener should be 10 mm or more. Installation of 100-liter hot water tanks has some features. In this case, fastening must necessarily occur with fixation on the other side of the wall. It is for this reason that experts recommend installing water heaters before the start of the main finishing works.

It is important to remember that when connecting different types metals, it is mandatory to use dielectric adapters, by means of which differences in the degree of expansion of materials differing in parameters are compensated. It is necessary to connect the input using a standard valve, and a branch pipe is installed on the output. At the final stage, the installed water heater must be turned on and checked for correct connection, no leaks and operability.

To install wall models, the equipment is fixed with anchors or bolts.

During the operation of water heaters manufactured by Ariston, difficulties, as a rule, do not arise, but it is necessary to take into account some rules that affect the durability of the device and its performance. Periodic preventive measures are taken, including inspection internal parts equipment, descaling and replacement of worn-out heating elements. average duration the operation of all mechanisms of a particular model can be found in the manufacturer's instructions. It must be remembered that the timely replacement of the anode allows you to extend the life of the water heating mechanism. In accordance with the recommendations of professionals, it is not advisable to set the thermostat to the maximum heating level.

If you set the temperature limit by about 10 ° C below the maximum values, then you can significantly reduce the cost of electrical energy, as well as save the resources of equipment parts. It is important to remember that you can disassemble the device yourself only as a last resort. Do-it-yourself repair work will result in the exclusion of the possibility of exercising the right to warranty repairs.

During the operation of water heaters manufactured by Ariston, difficulties, as a rule, do not arise

Do-it-yourself Ariston boiler repair

Repair work related to the elimination of breakdowns in gas appliances require the involvement of qualified specialists, and the repair of an electric boiler can, as a rule, be done independently.

Major mechanical failures are most often manifested by tank leaks, from which water begins to ooze or drip during operation. The cause of this failure may be corrosion in the weld areas or a malfunction of the reverse protection system of the valve, which operates and performs an emergency reset. In this case, it is necessary to eliminate the excess level of water and air pressure by means of a reducer. Any depressurization of the storage tank will require the purchase of a new tank. If such a defect is insignificant, then it is enough to replace the sealing gasket.

Repair work related to the elimination of breakdowns in gas appliances requires the involvement of qualified specialists

A fairly inexpensive measure is the independent replacement of some electrical parts, including a heating element, a bimetallic thermostat, sensors or switches. In case of prolonged heating, noise or hiss, as well as in the event of an ABS system shutdown protection, a replacement of the heating element is required, the average service life of which, as a rule, does not exceed five years. Replacement is carried out after de-energizing the device, draining the water and removing the flange.

It is very important to systematically check the magnesium anode, which is a consumable item and is intended for effective protection the inner surface of the tank and the heating element from corrosive changes. When thinning the anode to? from the initial volume is carried out mandatory replacement. The heating element is able to last much longer if the so-called “dry” heating element is installed in the structure.

Water heater repair Ariston (video)

Ariston, a well-established manufacturer in the water heating equipment market, has been a leader for a long time and offers the consumer only high-quality and very reliable products in a wide range. And the presence of the largest network of service centers in many cities of our country allows you to easily receive qualified assistance, both in repair work and in the maintenance of water heating equipment.

Each property owner wants to equip his house with an autonomous plumbing system that supplies hot water. So hot water can be used all year round, regardless of the season or schedule of the centralized installation. The 50-liter Ariston water heater is in great demand because it has a wide range of advantages.

A water heating boiler is a specialized device that performs the function of heating water with further stable maintenance of the temperature regime for a long time. What exactly is interesting about the 50-liter model and what models the manufacturer offers - in our article.

Equipment classification

Units of this manufacturer are divided into several classifications based on the following parameters:

Water heaters are accumulative, flowing, indirect;
Floor or wall type devices;
Equipment that runs on natural gas or electricity.

Each device has a specific heating system, a control unit, fasteners corresponding to the classification and other additional options.

Purpose of the tank

Household units powered by electricity are often used during the period when the water supply from the centralized pipeline stops. For short-term use, small wall-mounted storage water heaters are purchased. At competent installation, the device will provide the house with a supply warm water, which can be used to fulfill all household needs: washing dishes, wet cleaning, washing clothes or taking a shower.

In private cottages in combination with gas boilers use gas or electrical type heaters with large storage tank dimensions. In this case, the Ariston boiler is used year-round.

Rating of the best Ariston water heaters for 50 liters

The Italian company produces many modifications of water heaters, differing in the type of heating, volume, shape and other important technical specifications. We offer to consider the most popular models.

Ariston (50 liters) VELIS INOX

The wall-mounted device can be installed in a horizontal or vertical position. It is characterized by relatively low cost and medium volumes. The flat shape of the unit allows you to mount equipment not only on the open area of \u200b\u200bthe wall, but also in a niche.

The Ariston water heater is equipped with copper heating elements and power up to 2500 watts. In addition, the device has a protection system located on the electrical cord and a fuse that prevents unexpected start-up of devices with an empty tank.

Short description:

Ariston ABS VLS INOX QH

The external parameters of the model have significant similarities with the previous modification. The unit is equipped with automatic equipment that quickly heats up and thoroughly filters the liquid. In addition, the device regularly monitors temperature regime the coolant itself, preventing the electric water heater from overheating.

Ariston ABS VELIS PW

The inside of the equipment is covered with a protective layer developed in accordance with the innovative AG + technological scheme. The equipment is equipped with a system of protection against bacteria and two heating elements.

When assembling the device, a special welding technology was used, providing a strong and monolithic connection, which eliminates the possibility of leakage.

Ariston ABS PRO R SLIM

The cylindrical shape of the equipment allows you to install the unit in any convenient corner of the room. Accumulative electrical elements produce rapid heating of the liquid. The budget version is divided into classifications by displacement - 30, 50, 65 and 80. You can buy a unit at an average cost - from 8,000 to 14,000 rubles.

First power on

In order for the device to properly perform the functions for its intended purpose, you need to follow the selection recommendations, install the equipment and make the first switch-on, taking into account all the rules. Most Ariston water heaters are characterized by the following step by step instructions launch:

First of all, the cold water supply valve opens. It is very important not to confuse the element with the safety lever.
At the same time, open all mixers that receive a hot stream of liquid. The faucets will produce loud sounds and the pressure will be intermittent.
Wait until the tank is completely filled when a steady stream of water comes out of the faucet.
Turn on the power, set the temperature to medium.

It will be possible to increase the degree of heating after the first start-up of the equipment.

Very important in a water heater accumulative Ariston 50, 60 or 100, fix the lever in the required position, which is responsible for supplying hot pressure. If you ignore the situation, the heated liquid can enter the common riser of the house.

VIDEO: Water heaters ARISTON. Installation and installation

Repair work

Like any other technique, an electric storage water heater of 50 liters is flat or rounded, has vulnerable elements. In this case it is:

Thermoregulatory system;
Heat transfer sensors;
Switches;
heating elements.

Valves or gaskets are often the first to fail. The integrity of the boiler is violated in rare cases. The reason for this can be corrosion formations and improper operation. In case of serious damage, you must contact the service department.

Repair of Ariston 50 at home provides only preventive processes associated with the timely cleaning of heating elements. Experts recommend cleaning parts at least twice a year.

First signs of breakdown

During operation, the device emits a hiss.
The average amount of time spent on heating water has increased significantly.

Before proceeding with repair work, it is necessary to carry out preliminary preparation of the device. To begin with, the power supply is turned off, the liquid is drained from the system, the water supply is shut off.

The most optimal option for descaling is considered lemon acid previously diluted in water. The liquid is poured into the tank for a day, after which the mixture is poured out and the container is washed from the remnants of plaque with clean water.

The magnesium anode helps to solve the scale problem, in which the potential limit is lower than that of the tank coating and the heating element itself. If to speak plain language, the process of rust formation begins precisely from the anode, and only then it “spreads” to the heating element and inner surface tank. With regular replacement of the anode (on average 1 time in 8-12 months), the heating element will not need to be cleaned, and the equipment itself will work properly.

All modern water heating equipment is already equipped with removable magnesium anodes. The user is only required to timely replace with original consumables.

If necessary self replacement parts, only original parts should be purchased. Spare parts can be ordered from a specialist dealer or from direct suppliers.

Disadvantages of Ariston 50 l, 60, 100

Requires regular preventive maintenance to clean the heating element from scale. If you clean the heating element less often, this will lead to a quick breakdown of the device.
Uneconomical consumption of electricity.
Expensive repairs and spare parts.

VIDEO: Ariston water heater repair

Ariston water heaters are popular in the world market. This is due to the high quality of the products and the long service life, if the technical requirements both during the installation of the equipment and during its operation.

Popular models of Ariston water heaters.

Why Ariston water heaters are created

Ariston boilers are designed to heat and maintain the desired water temperature. Equipment is needed if there are interruptions in the supply of hot water. Installation of equipment can be carried out in bathrooms (bath, toilet).

Models and displacement

Due to the popularity of products, the manufacturer produces a large number of models with different characteristics. Models with electric heating elements differ in volume and the presence of a storage tank, power, water temperature limit. The higher the power of the heating element, the higher the maximum heating temperature.

There is also a difference in dimensions, weight and installation methods (vertical, horizontal).

The list below shows the most popular Ariston brand models on the market - a water heater and its brief description:

ABS VLS (VELIS) EVO PW 50- electric storage water heater. Volume - 50 l, equipped with a quick heating function, an electronic thermometer to monitor the water temperature, a safety device to protect against switching on if the tank is empty.
NTS 80V 1.5K SU 3700366- electric storage water heater. Volume - 80 l. Equipped with an external temperature controller in the form of a round scale.
ABS VLS EVO INOX PW 80 D- electric storage water heater. Volume - 80 l. The tank consists of 2 40-liter compartments. It has the possibility of accelerated heating, in the presence of 2 heating elements.
ABS PRO R 100V- electric storage water heater. Volume — 100 l. The model is equipped with protection against overheating (ABS security system). Energy savings are ensured by polyurethane foam insulation. Vertical installation provided.
ABS ANDRIS LUX 30- electric storage water heater. Volume — 30 l. The model has a bottom water pipe connection. The tank is made of steel, the inner coating is Ag+.

There are also small models with tanks of 15 and 10 liters. All the mentioned products in Tyumen can be purchased at the QUANTA + online store.

Typical boiler diagram Ariston 50

Electrical accessories storage water heater Ariston.

Electric storage water heater Ariston consists of:

outer case;
bracket;
internal tank;
hot water outlet;
magnesium anode;
cold water inlet;
heat insulator;
thermostat sleeves;
heating element (TEN);
flange;
thermostat;
power cable;
regulator knobs.

To connect the Ariston boiler correctly, you must follow the manufacturer's instructions.

First, the water heater is mounted on a wall or a supporting surface and a drain is provided from water pipe(cold water). It is most advantageous to install the device as close as possible to the source of water supply - this allows you to minimize heat loss.

If there is a collector in the system, a separate cold water supply pipe is transferred to the installation site of the water heater. In the absence of a collector, the nearest segment of the water pipe is cut, a standard tee is installed at the cut site.

The installation method of the tee depends on the material from which the pipes are made. On plastic fasteners is carried out using a special soldering iron, on metal - threaded.

A ball valve is installed on a separate section of the water supply system, designed to shut off the supply of cold water.

Scheme for connecting an electric storage water heater Ariston.

To connect the water heater to the water supply, you should:

Pay attention to the hot and cold water pipes - it is important not to confuse them. Installed on cold check valve, it can be included in the standard package. Hot water is connected via a pipe. First, a cold water pipe is mounted, then a hot one.
A special tape is wound on the threads as a sealant and sealant, this is recommended by the manufacturer.
A tee is installed on the cold water pipe, at the bottom of which there is a relief valve. A tap is attached to the side to completely drain the water from the tank in case of emergency possible under abnormal pressure or heat. A shut-off valve and an adapter are installed under the tee at a short distance. The next step is connecting to the water supply.
Connection to hot water is also made by installing a shut-off valve.
In the case of connecting different metals, adapters should be used.

The connection to the mains is carried out as follows:

AT switchboard a separate machine (RCD) is installed, it is connected to a central automatic fuse. A three-core cable is pulled from a separate RCD to the boiler, which is placed in an external cable channel (or a special gate is punched in the wall).
It is recommended to install a 16 A fuse as a switch, since the socket and plug are subject to heat and moisture. In addition, the cost of waterproof electrical equipment is higher than the cost of the machine. The "switch" is closed in a compact cabinet with a removable panel.
A separate RCD machine and a “switch” are connected by a wire.
A three-wire wire is connected to the heating element, for this the bottom panel is removed from the water heater.
Then the output of the machine is connected to the boiler.
The next step is to wire the ground, phase and zero lines to the appropriate connectors.

Scheme of connecting the Ariston water heater to the mains.

Before turning on the device, you must make sure there are no leaks and correct position flange (strictly in the middle). Then fill the tank cold water and open the hot water faucet to release the air. After the air is released, the valve closes and a trial run is carried out.

How to identify a malfunction

To carry out repair work, the user needs to notice a malfunction in the operation of the water heater in time. Ariston boilers are often equipped with an electronic display on which messages appear in case of equipment failures.

Direct signs of a malfunction can be:

operation of the machine at the moment the boiler is turned on - this indicates a malfunction of the heating element;
heating water above the maximum allowable temperature - this indicates a failure of the thermostat;
heating water below the required indicators - this may indicate contamination of the heating element, the appearance of scale;
drips at the bottom of the tank and on its walls;
breakdown of the information board, which most often does not cause significant failures in the overall functionality of the device, but can reduce comfort during its use.