Boiler ariston 100 instruction manual. User manual (instruction) for the operation of the Ariston electric water heater

18.10.2019

GENERAL REQUIREMENTS

This manual is included with the water heater. Keep the instructions in an accessible place
in case of transfer of the device to another user and / or moving to another place of operation.

Please read this manual carefully. The manual contains the necessary information on measures

safety during installation, operation and maintenance of the water heater.

carried out

user.

Installation

equipment

fulfill

a qualified specialist in compliance with safety regulations.

for damage resulting from failure to follow the instructions in this manual.

All installation work and maintenance must be carried out by a qualified person

in accordance with applicable standards and regulations, as well as with the requirements of the manufacturer.

Operation incorrectly installed device may result in personal injury and property damage.

The manufacturer is not responsible for damage resulting from incorrect installation.

equipment.

Keep packaging materials (clips, plastic bags, styrofoam, etc.) out of the reach of

children place. Packaging material is harmful to health,

The appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental abilities or in their absence life experience or knowledge if they are not under control

or have not been instructed in the use of the appliance by a person responsible for their safety

Do not touch the appliance if you are barefoot or have wet hands and/or feet.

Repairs must be carried out by a qualified technician using spare parts

produced by the manufacturer. Failure to comply with this requirement will result in the manufacturer disclaiming
all warranties.

11.Temperature hot water It is controlled by a thermostat that acts as an overheating protection.

12. Wiring must be carried out in accordance with paragraph "Electrical connection".

It is strictly forbidden to modify or replace safety valve to another that does not match

current requirements and standards, if it is not included in the kit,

14. Do not store flammable substances in close proximity to the equipment.

Symbols used in instruction text

Symbol

Meaning

Failure to follow these instructions can result in serious injury up to

fatality

Failure to comply with these requirements may result in property damage,

plants or animals

General requirements and rules for safe operation

GENERAL RULES FOR SAFE OPERATION

rule

Danger

Symbol

Do not open the body of the water heater.

Defeat electric shock. Receipt

o> ^ south when touching hot components.

Injury from touching sharp edges
and performances.

Do not turn on or turn off the water heater,

inserting or removing the mains plug from the socket.

Use a switch for this purpose.

Electric shock if
damage to the cable, plug or socket.

Do not operate the water heater with

damaged power cable.

Electric shock when touching wires with

damaged ichlatation, under voltage.

Do not place foreign objects on

water heater.

Injury caused by objects falling into

caused by vibrations in the water heater.

foreign objects due to vibrations.

Injury caused by falling device.

Do not step on the water heater.

Damage to the device or objects,

located under it, when falling
device.

The Ariston water heater is represented by a fairly wide plumbing assortment and the corresponding standard model lines.

The products of this trademark has the following categories:

traditional boilers;
floor boilers;
condensing boilers;
floor boilers;
boilers with indirect heating;
instantaneous gas water heaters;
water heaters equipped with heat pumps;
storage water heaters on gas;

Each appliance is equipped with heating elements, control devices and additional accessories.

Why Ariston water heaters are created

Household appliances for heating water, which are powered by electricity, are most often used for the period when hot water is turned off. As a rule, they acquire compact models. When professionally installed, it provides a supply warm water for daily household needs: washing, cleaning or showering.

In private sectors, with all communications, they use gas and larger volumes with storage. In this case, household appliances of the most famous Italian company are used all year round.

How to turn on the water heater Ariston

Under no circumstances switch on an empty heater!

Most household appliances are characterized by the following instructions when first turned on:

Open the cold water supply valve (not to be confused with the safety valve);
Open the hot water tap or lever from the mixer connected to the water heater;
Wait a certain amount of time to collect water;
When the heater is filled, water should flow from the mixer;
Provide proper nutrition for the device;
At the first start-up, the temperature should be set in the middle position, over time, the liquid temperature level is adjusted to save and quickly heat up;
Electronic models Ariston is regulated by buttons for the required level of heating;

These steps must be performed by the installation wizard.

Due to inexperience, they forget to open the valve responsible for supplying hot water from the boiler. If it is not fixed in the desired position, then the heated water from the device will follow into the riser of the house.

Water heater repair Ariston

Ariston water heaters have vulnerable parts:

thermostat;
sensors;
switches;
heating elements.

Most often, valves and insulation gaskets are repaired. The integrity of the tank is violated less often. This failure occurs due to corrosion or careless handling. The tank needs to be repaired only in the service.

As an independent repair, timely preventive cleaning is implied. Every six months, it is recommended to clean the heater for the Ariston water heater.

How to determine the malfunction?

It's simple, with obvious changes in work:

Strange hissing during operation.
The standard heating period is extended.
Switching on and off noticeably increased.

Any high-quality Ariston device is easy to handle with self repair. But it's better to follow this guide:

De-energize the room and the device.
Drain the water. Drainage must be provided by a hose with a diameter slightly smaller than the liquid discharge hole.
Put the drain hose into the toilet.
Shut off the cold water supply.
Disconnect from valve cold water hose.
Connect this hose to a faucet and lower it into the toilet.
Remove TEN. Its fastening is always on a nut with a washer or a plate.
Having pulled out the heating element, carefully examine all places with scale and try to remove everything without harm to the tank.
After removing the scale, pour clean water over the tank.
If the heater itself is in working condition, then you can clean it in the same way.
Install all hoses and parts of the heater in the same order.

The budget and optimal way to wash off scale is lemon acid, diluted in water. This solution is poured into the tank and left for 24 hours.

With an independent approach, it is possible and necessary to replace parts only with original ones. Spare parts for the Ariston water heater from the manufacturer guarantee the quality, the money invested in repairs and the stable operation of the devices.

Modern appliances for heating water are classified, first of all, by displacement. Selection also begins with the volume of the tank. Each of the Ariston models is designed for specific rooms and the frequency of switching on. What is the difference between the models?

Models and displacement

Line of models:

VELIS INOX.

Original Specs:

stainless elements, including tanks;
characteristic difference - universal (simple) installation;
flat shape;
Ariston water heater is available in 30, 50, 80 and 100 liters;
there is a protection system on the power cord;
fuse from starting with an empty container;
additional equipment is equipped with protection against freezing or overheating;
branded heating elements are made of high quality copper;
load distribution function due to flasks and two heating elements of 1 and 1.5 kW;
maximum power 2.5 kW.

ABS VLS INOX QH

Outwardly similar to VELIS INOX, but has differences:

Ariston water heater for 30, 50, 80 and 100 liters;
improved design solutions;
equipment with electronics for rapid heating, antibacterial water treatment (ECO), temperature measurement;
water is processed in two tanks; in rooms with a large area, an Ariston water heater of this model of 100 liters is recommended.

VELIS QH

It has external similarities with ABS VLS INOX QH and VELIS INOX.

Model differences:

super-fast heating;
ease of design and use;
LCD - display;
soft touch function (automatic saving);
water is heated in several stages;
internal tanks are covered with steel;
three heating elements (heating element);
Ariston water heater for 30, 50, 80 and 100 liters.

ABC VELIS PW

Original Specs:

safety shutdown (ABS0);
bacterial protection (ECO);
the inner tank is covered by latest technology AG+;
special welding method during the assembly process;
two heating elements;
heating in two containers.

PRO ECO INOX PW V SLIM

Original Specs:

water pressure function;
stainless steel;
model SLIM, diameter is only 353 mm;
internal tank with a special antibacterial coating;
installed at points with cold water pressure, any level of pressure is suitable;
low power (up to 1.5 kW).

ABS PRO ECO INOX PW

Original Specs:

Ariston heaters for 50, 80 and 100 liters;
narrow cylindrical shape;
simple installation;
electronic control;
external and internal parts from stainless steel;
testing for 16 atmospheres;
7 years warranty.

ABS PRO R INOX

Original Specs:

mechanical thermostat;
Ariston heaters for 30, 50, 80 and 100 liters;
a magnesium anode was installed to protect against corrosion and scale concentration;
external heating control;
protection against water drops;
water resistance;
one of the most economical models.

ABS PRO ECO PW SLIM

Original Specs:

Ariston heaters for 30, 50, 65 and 80 liters;
narrow forms of a water heater;
economical energy consumption, the tank of the model was tested for strength under a pressure of 16 atmospheres, a good margin of safety;
equipped with all security systems.

ABS PRO ECO PW

Original Specs:

Ariston heaters for 50, 80, 100, 120, 150 liters;
suitable for kitchen sink, full-fledged home or cottage;
equipped with all protective security systems;
additional heating element.

ABS PRO R SLIM

Original Specs:

the convenient shape of the cylinder allows you to mount the heater in any corner of the room;
Ariston heaters for 30, 50, 65 and 80 liters;
"folk", budgetary and suitable in size water heater;
with a diameter of 35 centimeters;
fast heating;
the presence of a safety valve;
all water protection systems, switching on without water;
the price of an Ariston Water Heater of such a model of 80 liters is only 8800 rubles.

Original Specs:

instant heating;
practicality;
compactness;
affordable;
the possibility of horizontal and vertical suspension;

Typical instructions for a water heater Ariston 80 liters

Water heaters of this volume are necessary for daily use by the whole family. Presence of sensors and temperature level guarantees safe operation.

A complex and responsible event in the installation process is the wiring. Most often, the wires need to be lengthened, because the factory cable is not long enough.

For long-term use of the device, it is necessary to carry out installation according to all the rules or with the help of an experienced craftsman. To avoid breakdowns and other troubles, follow the rules of operation:

The first switching on and switching off is carried out with a filled tank.
If the batteries are damaged, be sure to replace the weak parts.
In a room with a minus temperature, it is necessary to drain the water from the heater.
Long periods of inactivity of the appliance without heating function should be carried out with a closed tap or valve supplying water. Also, heaters must be unplugged from the outlet.

Devices for high-quality water heating from Ariston are presented in user-friendly sizes, equipped with all kinds of engineering improvements and are available in all major retail chains. It is enough to choose the model you need for individual installation.

Overview of the Ariston Velis PW 50 Water Heater - video

For the convenience of quickly obtaining hot water in the room, regardless of central heating, storage electric water heaters - boilers were developed. The range of electric heaters is very wide. Today we will take a closer look at the instruction manual for one of them, namely, the Ariston water heater.

Your task is to use it correctly

Having purchased Ariston electrical equipment for the home, do not forget to carefully study the instructions and always have it "at hand". Follow instructions should not in any way be skeptical and underestimated, since it is, first of all, your safety. Even if you accidentally lost the instructions from the device, you can get its electronic version specifically for your Ariston model on the official website of the manufacturer. People who create electrical devices, test them, test them, put the maximum useful information to the manuals for use and operation with the only important goal- so that you use them correctly. The same article will discuss General requirements and introductory moments.

Boiler diagram Ariston 50

Boiler designs have approximately the same construction scheme. It has a body, a water tank (the boiler itself), and a heating element (otherwise a heating element, sometimes there are several of them in the configuration). Be sure to install next to the heating element magnesium anode which prevents the formation of scale. The boiler itself from the outside and in its inner part has an insulating layer.

Two pipes lead to the water heater - one for supplying hot water, the second for cold. Boiler bodies can be cylindrical or flat. The boiler tank can have a different capacity - from 30 to 100 liters. The basic principle of operation of the boiler is to heat the water in the tank and maintain its constant temperature, set by a person, depending on the need.

What you need to know about Ariston boilers

The main function of Ariston water heaters is to provide houses, apartments, cottages, cottages with hot water for household purposes. In order for the electric water heater to serve for a long time and with high quality, the following characteristics:

It should be noted that the instructions for water heater models that differ only in the system of different volumes of the same series are almost identical. There are two types of heaters according to the principle of operation: flow-through (the heat exchanger heats the temperature instantly as soon as you open the tap) and storage (water is drawn into the tank and then heated). Storage water heaters, or boilers, have compact tank, designed for different volumes - 30, 50, 80, 100 liters. Boilers are of direct heating (they heat water using gas or electricity) and indirect (such devices are located near the heat exchanger, for example, a boiler).

Installation of the device must be carried out by a specialist, otherwise your equipment will lose the right to warranty service. After installation electric water heater check the following:

About installing an electric water heater Ariston according to the instructions

Before installing the water heater, make sure the wiring can handle the added power. It is especially important that the outlet to which you are going to connect the device is grounded and not in contact with water. The power supply to the water heater must go from the shield on a separate cable. When choosing a place to install an electric water heater, consider its weight together with water in three times the size and the strength of the walls.

For fastening, hooks with a size of at least 15 mm are required. It is recommended to install a water heater in the immediate vicinity of the displacer, which will also reduce heat loss when water is supplied to the point of analysis. The distance from the ceiling is at least 10 cm, the space around the device is within a radius of at least 50 cm for technical work.

Under what conditions should the device not be installed?

If the water is hard, you must additionally install a filter, otherwise the water heater will quickly fail. The appliance must not be installed indoors temperature regime which may have a negative indicator, exclude the influence of factors dangerous for the device - dampness, frost, direct sunlight, dust and insects. Maximum avoid splashing water, steam on the body of the device, that is, it is not recommended to install it directly above the bathtub.

With low water pressure, it is necessary to set the maximum temperature, otherwise the device may not turn on at all.

Only branded parts

All parts of the water heater, when first installed, must be in good condition. This is especially true for the safety valve. If damage is noticeable, the part should be replaced with a similar one. In no case do not use adapters or extension cords, do not replace the water heater plug with another one. Separate power line required to power the boiler. If the power cord is damaged, replace it with a similar one.

When turning off the electric heater, use a two-pole switch, the gap between open contacts is from 3 mm. Also note that the pipes to which the water heater pipes will be connected have withstood temperatures in excess of 80 degrees Celsius and the maximum working pressure.

Precautionary measures

If you know that you will not be using the appliance for a while, simply drain all the water from it. To do this, turn off the power to the device, close the cold water supply valve at the water heater, and open the hot water tap on the mixer. Open the tee drain valve. A magnesium anode that wears out over time should be replaced with a similar one. The first start-up of the device should be carried out strictly according to the instructions.

Prevention

With frequent use of the boiler, the first technical inspection should be carried out in six months or a year. Every 3 months it is recommended to drain the contents of the tank in order to remove sediment, which prevents heat transfer and reduces the efficiency of the heating element. It is also recommended to replace the magnesium anode after a year of operation of the device. Never ignore the error codes that appear. You can see in detail what each of them means in the instruction manual.

Updated:

2016-09-07

Instructions for the water heater Ariston 80 liters and a number of other issues regarding this equipment will be discussed in our material. We will talk about the main advantages of Ariston equipment, the device, the rules for connecting and operating the units.

Ariston products are in rather impressive demand in the domestic market. Many people choose this particular manufacturer when buying a water heater. What is the reason for this? The advantages that a boiler of 30, 50, 80 or even 100 liters carries.

When choosing a boiler for 30, 50, 80 or 100 liters, you should rely on the number of users and the number of consumer points. If this is a small family of 2 people, 30 or 50 liters is enough. But for families of 3 people or more, it is better to take a boiler for 80 or 100 liters.

Now about the benefits of Ariston.

Attractive, modern design Ariston. Many are guided not only by the efficiency of the boiler, but also by appearance, since the unit will be located in a conspicuous place. In this regard, Ariston appliances are able to decorate the interior, and not only provide hot water.
Long service life. Ariston boilers with a volume of 30, 50, 80 and 100 liters have a factory warranty for several years, but in reality they can serve for more than ten years. This was achieved through the use special materials, which cover the inner walls of the boilers. They protect against scale, rust, plaque.
Modern dividers are used. Due to them, cold water does not mix with heated water. Therefore, when heating even a small amount of water in a boiler of 30, 50, 80 or 100 liters, you can use hot water rather than waiting for the full heating of the entire volume of the water heater.
Protective mechanisms of the water heater. They work very efficiently, responding to potentially dangerous power surges. This largely ensures such a long service life of Ariston equipment, which we talked about earlier.
Antibacterial protection. With its help, you can safely wash under water from a boiler that has been operating in your house for more than a year, without fear of water pollution.
Protection of the water heater from an empty tank. Everyone knows that it is impossible to turn on the boiler when the tank is empty. Otherwise it burns out. But there have been many precedents. Unlike them, Ariston water heaters are equipped with special mechanism, which does not allow the device to be put into operation if the tank is empty.

Device

Now let's see what components a modern Ariston water heater consists of. In fact, regardless of the tank of 30, 50, 80 or 100 liters, the design remains identical. Only differences are in the size of the elements, their characteristics, capabilities.

Water heater body. This is the outer shell that hides all the internal components. The designers did a great job making Ariston boilers not only efficient, but also very beautiful;
Internal capacity. Or a tank. This is the same tank where cold water is poured from the water supply system;
TEN. A heating element that provides heating of the incoming cold water to the boiler. In models with a volume of 30 and 50 liters, one heating element is used, and water heaters of 80 and 100 liters can be equipped with two heating elements at once. This contributes to faster heating of a large volume of water;
Thermal insulation layer. An effective heat-insulating layer on Ariston boilers contributes to the long-term preservation of the temperature of the heated liquid;
Pipe and splitter. These devices are responsible for the separation of heated and cold water, as well as the supply of hot liquid to taps, shower heads and other consumers;
magnesium anode. This is an indispensable element of any boiler. Its task is to prevent salt deposits on internal surfaces. Considering the quality of the water entering the boiler from the centralized water supply, the developers used an improved efficiency anode to cope with less than perfect water. It is not uncommon for the repair of Ariston water heaters to involve the replacement of the anode or heating element;
Temperature controller. It is necessary in order to turn off the operation of the heating element when the water temperature reaches the user-set mark;
Thermal relay. An important unit that contributes automatic start Heating element in a situation where the temperature drops below a predetermined mark;
indicator lamp. This voltage indicator allows you to monitor the operation of the boiler;
Thermometer. All Ariston water heaters are equipped with built-in thermometers. With their help, the user can monitor the change in the temperature of the heated water.

Useful Features

Having chosen a boiler from Ariston for 100, 80, 50 or 30 liters, it will be useful to know about the capabilities of this equipment.

Turning on and off. A working boiler is determined by luminous indicators;
Power adjustment. The user himself sets the parameters on which the equipment works;
antibacterial mode. To turn it on or off, hold the "Power" button for 5 seconds;
Temperature change. You can change from 30 to 75 degrees by pressing the + or - buttons.

Installation instructions

Let's be honest, the installation of boilers for 30, 50, 80 and 100 liters is best left to a specialist. But if you decide to do everything yourself, then we recommend that you follow certain rules.

Check the condition of the safety valve. If it has visually noticeable defects, be sure to replace it with a new one.
When installing the screws used to install the boiler, be sure to use plastic dowels.
Make sure that the grounding elements are installed correctly.
Use only a separate power line to connect the boiler. No extensions. Choose waterproof outlets.
To connect Ariston water heaters, use only the plug that came with the kit.

Operating rules

In order for your Ariston boiler to work for more than one year, and always efficiently heat all 30, 50, 80 or even 100 liters of water, follow certain recommendations for operating the equipment.

Check the presence of liquid in the container before each shutdown and restart of the equipment. Only when the tank is full can power be applied. Despite the presence of a protective system in Ariston, ignore this advice do not recommend.
If the boiler cord is damaged, the replacement is carried out exclusively with a component of the same manufacturer and with the same characteristics. It is better to buy accessories for Ariston boilers in branded or specialized outlets.
When planning a long shutdown of the water heater, be sure to drain the old water according to the instructions for your boiler model, then turn off the water supply tap from the water supply system, and then turn off the power.
Periodically, your Ariston will need a system cleanup. Here we recommend using a warranty and post-warranty agreement so that this procedure is performed by specialists. You can learn all the subtleties, in order to then do the work with your own hands.

Ariston boilers are time-tested water heaters that rightly occupy their high positions in the market.

Like all Ariston appliances, the water heaters of this company have a lot of benefits:

The first of these can be called stylish design which helps to decorate any interior. Moreover, each of the models is created in accordance with the latest technologies.
Ariston 80 water heater is different longest service life . This effect was achieved due to the fact that internal walls storage tank covered with a layer modern material which protects the tank from plaque and rust.
Built-in latest dividers, prevent mixing of already heated and cold water . This allows you to keep the temperature of the liquid. Also, the Ariston heater is protected from overheating, thanks to built-in temperature control sensors.
Presence of a safety shutdown device , which is triggered at moments of a sharp change in voltage.
Using Ariston water heaters, users can significant savings on gas or electricity consumption . This is facilitated by the presence of thermal insulation, which keeps the water hot for a long period of time.
Many models of water heaters equipped with bacteria protection which makes it possible to use purified water. If there is no water in the system, then you do not have to worry that the water heater will turn on, as it is equipped with special protection.

The device of ARISTON water heaters for 80 liters

The external simplicity of any water heater carries with it the same uncomplicated internal structure. The difference can be observed only in the external design and materials from which the heater is made. The external structure of the housing can be made in a cylindrical or flat shape.

Any water heater has:

Inner tank - a boiler into which cold water enters. It is framed by an outer case.
The water that entered the tank is heated by the built-in heating element . For faster heating of water, two heating elements may be present in the boiler.

Thermal insulation layer , which is present between the body and the boiler, acts as a thermos, which allows you to keep the water temperature longer.
Water enters the tank through shortened branch pipe with divider . The heated water is supplied by a drain pipe.
magnesium anode , built into the ariston 80 water heater, helps prevent the deposition of mineral salts on the walls of the inside of the tank. This element is replaced as needed.

During heating, when the set temperature is reached, the thermostat , which automatically interrupts the power circuit.
If the heating element is turned on, and the water temperature indicators have fallen below the set ones, then the configured thermal relay .
Allows you to control the operation of the water heater voltage indicator (indicator light).
Built-in thermometer makes it possible to monitor temperature changes.

The water heater has the same typical internal structure. accumulative ariston 80, which refers to flat horizontal models.

Shuttle Ariston electric water heater: instructions for using boilers, diagram

After buying such an assistant as an Ariston 80 liter water heater into the house, the instruction should be the first document that should be carefully studied before starting its operation. This will help to understand all the nuances of working with the boiler and extend the period of operation of the device.

Ariston water heater 80 liters is used to supply the house with hot water. The choice of this series of heaters is promoted by a set of positive characteristics.

The ariston 80 v water heater has the same device and instructions for use as all models of this series. Installation should be carried out in accordance with the attached diagrams.

Connecting the boiler Ariston

It is better if this work is carried out by specialists. The rules to be followed when installing the device are given below:

It is necessary to inspect the safety valve, which should not have visible flaws. If they are, then the damaged part should be replaced.
Plastic dowels are used for driving screws.
Be sure to check all grounding elements.
The electric heater requires a separate power line to operate. The use of extension cords is strictly prohibited. The socket is placed in a non-humid place.
In operation, you must use the plug that came with the kit.

The water heater Ariston 80 performs the following functions :

Turn on/off . After switching on, the whole system starts up, which is due to the lights on, the temperature of the water in the boiler will be displayed. If the indicators are not displayed or flashing, this indicates a system shutdown.
Water heater ariston abs vls 80 has power level adjustment function , which makes it possible to set the necessary indicators.
Water heater ariston abs vls pw 80 allows you to use antibacterial function , which can be activated or deactivated by holding the "power" button for 5 seconds.
Possibility to adjust the temperature using the "+" or "-" buttons in the range from 30 o to 75 o; The set values are not fixed. After switching on again, the values \u200b\u200bmust be set again. Standard temperature values are 75 °, power - 1500 watts.

Water heater operating rules

It is not difficult to extend the life of an ariston brand storage heater, you just need to install it according to the instructions and steadily follow the rules for using the device :

Should control the presence of water in the boiler every time you turn it on and off devices. Switching on is possible only when the tank is filled with water.
If the power cord is damaged, replacement must be carried out with a material of the same brand , which is best purchased at a specialized outlet.
If the heater will not be used for a long period, especially during the cold season, then water from the boiler must be drained , following all the rules prescribed in the instructions. After that, the cold water supply valve is closed. After these steps, the heater is disconnected from the electricity supply.
The heater eventually requires cleaning from dirt . To carry out this work, it is better to use the services of specialists.

Reviews of ARISTON water heaters with a volume of 80 liters

For those buyers who have decided and purchased an ariston water heater, the reviews remain purely positive. Below are some of them.

“Pros: excellent “employee”.
Cons: didn't find any.

Since we have private house, but there is no gas, it was decided to purchase a boiler. Tired of constantly heating water on the stove in order to buy up and simply wash the dishes. We asked friends who already have experience with such units. Those, in turn, advised the ariston water heater. After reading more reviews, we opted for a brand like ARISTON.

Bought a model with a volume of 80 liters. This is enough for a family to use. I really liked the presence of a sensor with which you can always find out the level of water temperature in order to “not get into a slippage”)). This heater served us for many years, it was even sad to leave (they removed it, because they had gas and connected a double-circuit boiler). But during the service, this heater showed itself just fine: it quickly “delivered” hot water and kept its temperature for a long time, it spent little electricity. In general, the model is excellent !!!

“Advantages: compactness, fast heating of water, low electricity consumption, equipped with additional protection.
Cons: none.

Excellent water heater. I had to get acquainted with him when a systematic shutdown of hot water began in the houses. indefinite terms. In order not to sit and wait for a "miracle", it was decided to buy a water heater. On the advice of the seller purchased a heater

Ariston SG-80, which did not have a high price. And yes, we liked it too. The place for the boiler was determined in the toilet, where it did not create inconvenience to anyone. During the use, we made sure that we took an excellent assistant: it quickly heats water (80 liters in 4 hours), consumes little - 1.5 kW, heats water to an acceptable temperature - 75 o, there is a safety valve and a magnesium anode. We were completely satisfied with our choice!”

“Advantages: simplicity, reliability, ease of use.
Cons: didn't find any.

The Ariston SG-80 brand water heater came into our house back in 2013, we bought it at a discount and did not regret it. My husband did the installation himself and it wasn't that hard. The heater serves the bathroom and sink. There is enough water to the head, despite the fact that we set the heating level to 50 o, it allows you to save a little. It takes an average of 2 hours to heat 80 liters at this temperature. I was very pleased with the quiet operation of this device. We are satisfied with the purchase."

“Advantages: heating up to 75 °, low consumption of electricity.
Disadvantages: little essential, but ill-conceived lid.

Our small town is not connected to hot water supply. While they lived together, they managed. But after the appearance of the baby, they decided to buy a boiler. We chose models with a volume of 80 liters available at our means. Stopped at Ariston models SG 80, which suited us in all respects: energy consumption of 1.5 kW, volume, heating temperature, which reaches 75 ° and, of course, the price.

Having established, they themselves felt the dignity. Everything worked "with a bang." It created a little inconvenience when switching the temperature, when it was necessary to switch the lever under the lid. It was not entirely convenient to crawl with a screwdriver to the right place. But this is not so significant, because we had to change the temperature indicators only once. In general, the model is excellent. Recomend for everybody!"

Prices for the main models (name, description, manufacturer, price)

When it comes time to buy a heating device, it is immediately better to pay attention to the Ariston 80 liter water heater, the price of which is fully consistent with the quality. Consider some models of heaters from this manufacturer.

ARISTON ABS BLU R - vertical storage water heater. The price ranges from 6300 to 7700 rubles.

It has an anti-corrosion coating Ag +;
Additional protection in the form of a magnesium anode;
Uniform heating of water is provided by the Nanomix technology;
Thanks to Absolut Bodyguard System technology, the system is blocked in the event of a lack of water or power surges;
Built-in safety valve.
Built-in external thermometer.
Mechanical control with indicator.
Water heating up to 75 ° is carried out in 3 hours with a consumption of 1.5 kW.

water heater ariston vls pw 80 - wall heater with the possibility of mounting horizontally and vertically. The price for this model varies between 11,000 - 13,000 rubles.

The inner tank is treated with a special Ag+ coating;
Double heating element accelerates water heating by 60% after connecting the ExraPower mode;
ABS 2.0 protection protects the system from power surges and operation in the absence by turning it off.
External water temperature sensors allow you to monitor the state of water heating;
Built-in ECO antibacterial system;
The Nanomix technology accelerates the heating of water, which contributes to the uniform heating of the liquid.
Water is heated up to a maximum value of 80 °C at a power of 1.5 kW in 3 hours, at a power of 2.5 kW in 2 hours.

Ariston SUPER SGA - excellent gas heater made in Italy. The price of such a storage water heater is 16,500 rubles.

Device characteristics:

Steel case;
Internal enamel anti-corrosion coating;
Thermal insulation layer made of polyurethane foam;
The presence of a gas valve.
Connection can be carried out both in parallel and in series;
Works independently of the mains;
Ability to control the flame;
External regulators and indicators.

Flat electric water heater Ariston ABS VLS INOX PW Can be installed in vertical and horizontal position. The price for such a model is 17,250 - 19,930 rubles.

Main characteristics of this model:

Steel inner tank with additional protection;
The “fast” function speeds up the heating process by turning on the second heating element;
Antibacterial protection system;
Protection against overheating, power surges, switching on without water;
Built-in “Nanomix” system;
The presence of an electronic thermometer;
There is a system "Autodiagnostics";
External display with control buttons.
Water heating is carried out to a temperature of 80 ° C by one heating element in 3 hours 06 minutes with a consumption of 1.5 kW, with the “fast” system turned on in 1 hour 51 minutes with a consumption of 2.5 kW.