Ceiling borders made of foam and paper, how to glue them? How to make a wallpaper border sticker Finishing wallpaper with borders.

Each person in his life strives to bring something new, individual. Also, during the repair, I want to create a new interior, stick wallpapers that will differ in their originality and color of flowers. But sometimes, when sticking the most expensive wallpaper, you get the impression of something unfinished and unfinished. A do-it-yourself wallpaper border will not only solve this problem, but will also help create a cozy, warm and comfortable atmosphere in the room.

A glued border on the wallpaper adds originality to it, while creating a cozy and warm atmosphere in the room.

Some Features

The border is a separate element that turns the room into something exclusive. It can be ceiling and middle, which is glued in the middle and can harmoniously connect wallpapers of the same color, but with a different texture pattern. According to their qualities, they are divided into three types:

• on an adhesive basis;
• self-adhesive;
• simple.

Wallpaper borders are available in various widths and textures.

A large selection of shades and patterns, allows you to choose this element of decoration for any color and quality. Simple borders are glued to ordinary wallpaper glue, those that are glue-based, it is enough to moisten with water and stick, but self-adhesive - their name speaks for itself.

They can be glued anywhere, both near the floor and under the ceiling, around the door, and you can make an edge around the window opening. But what is it for anyway? The border tape is used if, on the advice of the designer, several types of wallpaper material are combined in one room at once. Borders emphasize some design elements, they can visually reduce or enlarge the room. There is another attraction of the borders, which are glued to the center of the walls. Wallpaper from the bottom gets dirty faster, and if you have combined ones, then the bottom part is very easy to replace by choosing the color.

In general, it is advisable to use borders in a room with high ceilings. If the ceiling is not high, then the curb will visually further reduce the room.

Borders, as a rule, are used at the point of contact between the wall and the ceiling. Their sticker is the final step. They are mainly sold complete with wallpaper, with the exception of plain material. In this case, the border tape can be selected separately. They are also used if you want to give expressiveness to any area or highlight the play of daylight.

For mounting the curb tape use special adhesive mixtures, which are designed specifically for gluing wallpaper and border material. When carrying out work, in order to evenly stick the tape, it is necessary to stretch a fishing line or thread along the wall.

Back to index

Types of borders depending on the material

There are several types of wallpaper borders made from the same materials:

• for fiberglass wallpaper;
• for textile wallpaper;
• for acrylic wallpaper;
• vinyl;
• paper.

Paper ones are the cheapest type, and therefore they have a short service life. They are easy to stick on and just as easy to remove, which in the future will not be difficult to change them. Such borders are not in demand. This type is prone to rapid fading, they cannot be washed with water, as they will instantly fail. But they found their application in rooms where you often have to change the interior. They are produced in different structures, they can be both embossed and smooth, with or without a pattern.

Vinyl borders made on paper basis, covered with vinyl, are available in different densities. They have a number of advantages:

• water resistance;
• strength;
• resistance to ultraviolet rays;
• durability;
• washable with detergents.

This type of borders and wallpaper is used in rooms with high pollution. They can be used in the kitchen, bathroom, dressing room. They are non-toxic and have a porous base, which means that the walls have access to air.

For acrylic wallpaper, borders are similar to vinyl, but with one difference: they do not have a vinyl coating, but an acrylic one.

Borders for textile wallpapers or silk-screen printing give the walls a richness of exquisite decoration. They are two glued layers, the bottom is thick paper, and the top is woven. They do not collect dust and have antistatic properties.

Fiberglass wallpaper borders are made from fiberglass yarn and contain sand, soda and dolomite. These types of borders are considered the most durable, they are resistant to fires, they can be painted, they are elastic and environmentally friendly. They have a corrugated structure.

Using a wallpaper border will make the walls look more finished Not very wide strips for decorating wallpaper are called borders. Often they serve as a border for combining different types of wallpaper on one wall, in particular, in a horizontal way. The border in this situation looks natural and concise.

Decorative borders for wallpaper: what is their feature

Glue borders most often in the upper segment of the wall. This does not mean that only this option is acceptable, but this is a typical case. Although, it would not be superfluous to consider the option with a border along the perimeter of the ceiling, or, which is also interesting, in the lower third of the wall.

Features of the location of the curb:

1. At the top of the wall it plays the role of a decorative edging, which definitely makes the room cozier.
2. Around the ceiling the border serves as a separator, zonator.
3. Wall bordering near the floor - a way to hide the unsuccessful gluing of the walls, when you made a little mistake with the height of the wallpaper.

The border can be the boundary between the panel and the main wall. In this case, it is located at a height of at least 80 cm from the floor level

But the vertical use of borders is not uncommon. For example, if you need to visually divide the wall into two zones, this option is often chosen in the nursery. Doors, mirrors, etc. are bordered with a border, in a word, what you want to highlight.

Paper borders for wallpaper in the nursery: application specifics

A paper border is often used in a nursery. And this is a smart move.

The border in this case will help:

• Divide the room into a zone (work, play, neutral);
• Visually change the space, visually increase or expand it;

A wallpaper border will help to separate the lower third of the wall, which in the nursery just makes sense to paste over with other wallpaper, more dense, washable, practical

A definite mistake would be sticking a border in the middle of the wall. Not only does it not look very impressive, it cuts off a large part of the wall, visually, of course. But vertically gluing a border in the middle of the wall is not forbidden.

How to glue a border on wallpaper: instructions step by step

The pasting process is simple, your main task is the perfect evenness of the walls, where the border will be fixed.

You will need a building level and a slate pencil.

Proceed like this:

1. Measure in several places the desired height from the floor (of course, the same everywhere);
2. Put dots in these places, and connect the lines to each other;
3. The place is determined, which means that half the work is done;
4. Roll a small roll along the wall and cut it in the right places;
5. Lay the pieces with the pattern down, and on reverse side apply special glue to the curb;
6. You can fold the canvas with an accordion so that the side with glue is inside;
7. Take the canvas left hand, straighten the first fold and attach it to the wall;
8. Smoothing the border from the middle, move to the edges;
9. Apply the canvas until it is completely glued to the wall.

Each new part must be combined with the previous one. At the corners, the borders are glued according to the type of wallpaper, that is, they overlap. The allowance will be approximately one and a half centimeters

Great, if you purchased self-adhesive borders, this will speed up the process. If you have a regular border, the question arises of what glue to fix it on. Paper borders are glued to the glue for the appropriate type of wallpaper, denser ones can be glued to liquid nails or Titanium glue.

Wallpaper border (video)

Do-it-yourself wallpaper border: we make the decor ourselves

If you decide to make a wallpaper border yourself, the most obvious way is to cut a strip from another type of wallpaper. Of course, you need to cut carefully and strictly along the line marked in advance. Any unevenness will be noticeable.

But there are more creative options for making borders. If its length is short, you can build a border from children's photos. For a baby or teenager's room, this is a very original and touching option.

You need to make a strip of a certain width on which children's photos will be pasted. To make the border look aesthetically pleasing, already print the photos in decorative frames so that they do not just stick dully to each other.

As an alternative, for a wallpaper border, you can use decorative plaster or piece decor

DIY wallpaper border can be made from:

• Fragments of designer cardboard;
• Postcards;
• textile fragments;
• Self-adhesive film;
• Colored fluorescent paper.

And here the most daring ideas can be taken - the border can be laid out from the covers of old records, magazines, posters.

Wallpaper with a border in the interior: important points

There are a few more helpful tips that may come in handy before you get started.

Note Tips:

1. You should not stick a border on a wallpaper that has just been glued, be patient for a couple of days in order to avoid unexpected troubles;
2. Special glue dries quickly, so glue the border in stages;
3. When cutting, make the pieces a little longer so that the pattern can be compared.

A wide, dark-colored border draws attention away from the dirt that is often found at the bottom of the wall.

The border serves as a stylish addition to the interior. It seems to be a small detail, and the room becomes more elegant.

The delimiter border eliminates the need to use furniture as a zoner. One glued strip visually divides the room into zones, and it usually looks convincing.

It is important not to miscalculate in the palette. Do not confuse cold and warm colors, such a substitution will literally cut the eye.

The specifics of gluing a border for wallpaper (video)

The border is not a new solution, sophisticated, interesting, classic. modern standard apartments often lacks the conciseness, rigor, sophistication that the border brings to the interior.

Happy interior design!

Border for wallpaper in the interior (photo)

Conducting another redecorating, the owners are probably thinking not so much about updating appearance decoration of rooms, how much to create a unique design, so that it looks beautiful and matches the purpose of the room.

Sometimes in the design of the walls a technique is used - a combination of several types of wallpaper. Its use serves different purposes. For example, such: to hide the imperfections of the surfaces of the walls, the disproportionate size of the walls and ceiling; give the atmosphere of the room some dynamism; highlight and emphasize the details and accessories in the interior of the room.

Sometimes alternating horizontal wallpaper of different colors may require gluing a border. Therefore, we will dwell in more detail on how to stick the border correctly.

The main purpose of alternation is to mask the imperfections of the surfaces of the living space.

Alternate stripes of wallpaper vertically

The combination of 2 pairs of wallpaper colors can be expressed in the alternating vertical alternation of different wallpaper strips at regular intervals. To glue wallpaper according to this option, you need to be very careful about choosing paired shades for wallpaper. The principles for selecting paired colors for wallpaper can be as follows:

1. Use of shades within 1 color (for example, green of a lighter and darker shade).
2. Harmonious colors. For yellow, for example, it will be orange, egg, light green, cream, etc.
3. Contrasting colors (green - red, lilac - yellow, orange - sea green).

You can start alternating using a smooth transition on one of the walls. This will eliminate sharp color changes, but get a very original effect.

For an oblong room, you can use the "Symmetry" technique. Background wallpaper should be lighter in color, and cover almost the entire room with them, except for the center of 2 opposite walls. In the central part of the walls there will be a wide panel of wallpaper with an additional bright shade and a different texture. It is up to the size of the panel that the room will be perceived visually much smaller.

Somewhat reminiscent of the previous "Asymmetry" technique. At the same time, wallpaper should be glued on the 1st wall in the same way as described above. Here it is important to know how to glue the wallpaper on the opposite side. Bright stripes of wallpaper are glued on it, starting from an angular location. This approach to the wallpaper sticker will visually increase the width of the room, slightly reducing its length.

Horizontal combination of wallpaper with different patterns

Alternating wallpaper horizontally, it is not necessary to adhere to the standard ratio of 1/3, pasting over the lower part of the wall surface with a meter-long piece.

Connect your imagination and experiment with the choice of colors and textures of materials. The combination is welcome in the kitchen different finishes for walls (paint, tiles, wallpaper). In the bathroom, for obvious reasons, the choice is not so wide (panels, tiles, paint). In living rooms, the choice will have to be limited to different types of wallpaper.

1. Today, a very popular technique is to focus on one zone. It is used to give a separate element of the interior increased attention in the overall composition of the entire design. For example, highlighting the area of ​​the wall behind the TV. The main background in the room can be wallpaper with a pattern, then the highlighted area is decorated with wallpaper without a pattern.
2. In the bedroom, it is also permissible to highlight the accent wall: often brighter wallpaper with ornaments is pasted over the wall located behind the bed.
3. Splitting horizontally is a good alternative to vertical striping. The lower part is pasted over with textured wallpaper, and the upper part - textile. The seam is masked behind a plank, molding or border. When there is no idea how to properly paste wallpaper with a border, then it makes sense to use the previous methods of gluing paired wallpaper.
4. The patchwork technique looks original in any interior style. To implement it, you will need different rolls of wallpaper. Identical pieces are cut out of them, which are then randomly glued to the wall.
5. Protrusions and niches can be distinguished by material of contrasting shades. A special effect will be achieved on a colorful background.

Examples of decorating different wallpapers for a children's room

How to paste wallpaper in a baby's room using a combination of wallpaper?

1. You can use the technique of wallpaper inserts: all wall surfaces are pasted over with the same wallpaper, and bright characters from animated films are pasted over the background, forming entire plots.
2. If you glue wallpaper with a border in a child's room, then it is best to stick a border with drawings at the level of the baby's eyes, then he will be able to look at funny pictures with pleasure.
3. Another interesting option in the child's room: the upper part is made plain (painted or pasted over), and strips of special washing wallpaper with carved edges are glued to the bottom at a distance of 45 cm from the floor. Such decorative wide wallpaper rolls are expensive. But you can find such a way out - to glue them only visible to the eye parts of the walls where there is no furniture.

Today, for almost all wallpapers, you can find a suitable border.

What is important to consider when buying a wallpaper border, and how to glue the border in accordance with all the rules?

Wallpaper borders are narrow strips of wallpaper used for decorative edging of a pasted area. The border serves as a horizontal embossing of the surface and the visual perception of the height of the room will depend on its size (the wider the strip, the lower the ceiling height will look). Border dimensions - 10-20 cm wide.

The difference between a border and a frieze is that the strip of the latter is more than 20 cm wide.

For what types of wallpaper are there borders?

1. For paper. They are easy to put on and easy to take off. Such wallpapers will be an excellent option for those who often make repairs. This is due to the fact that such strips are not very durable, they instantly lose their brightness, and they cannot be washed (especially with the use of detergents).
2. For vinyl. It is impossible not to note their practicality: they are easy to wash, clean; they retain their original color for a long time. Therefore, they can easily be involved in the design of a bathroom, toilet, kitchen, hallway.
3. For textile. They have 2 layers: a paper bottom and a woven top.
4. For acrylic. These are analogues of vinyl. The main difference is that acrylic emulsion is applied on the base. Cheaper than vinyl.

An unusual effect is created by colorless borders made of artificial materials. They are used in tandem with wallpaper for painting or glued onto plain painted walls, after which they are rolled up simultaneously with wallpaper with water-based paint.

A glued border on the wallpaper creates a cozy and warm atmosphere in the room.

Finding a border is a responsible business. It is easy to find suitable borders for wallpaper. Surely already in the wallpaper store they will offer several alternative options to choose from. This can be done from a beautiful catalog, the pages of which present samples of wallpaper and stripes in harmony with them.

Correspondence of the border to the wallpaper canvas. Manufacturers limit the choice to 2 types of combinations of borders and wallpapers - by shade and the presence of a pattern. For example, a dark green background with floral ornaments can be complemented with a white or light green stripe with or without a similar pattern of twigs and flowers.

It will not be difficult to pick up a border of any color and with a different pattern for plain wallpaper.

Sometimes factories provide a combination of different patterns on the borders and wallpaper. But this should be done with great care in the presence of artistic taste. Otherwise, the wall may turn out to be too colorful.

Sometimes there are proposals from manufacturers when wallpaper with borders is made with the same pattern, but of a different scale. For example, on the wallpaper, the leaves can look large, and on the strip - miniature. It is important that the wall covering has a color consonance with other elements of the decor. Therefore, it is so necessary to accurately select the shade of the edging or the wallpaper itself.

Locations on the wall surface

Wallpaper borders can be located at the top and bottom of the wall. With the first arrangement, a decorative edging is obtained, giving the room more comfort. In the second position, the border strip acts as a delimiter between different types of wallpaper. The border is not glued in the center, because in this case the room begins to seem much lower. The optimal location is considered to be at a distance of 1/3 from the floor surface.

Less often they make an edge at the very bottom of the floor. This technique is applicable in a situation where too short strips of wallpaper are cut off and the gap needs to be filled with something.

Wallpaper borders can be glued both horizontally and vertically (to visually highlight a certain part or section of the wall). Of these, they make a frame for wall panels, photo wallpaper, interior doors, furniture and other accessories.

Attaching borders to the wall

There are several ways to stick a border on wallpaper:

1. Often the border is glued directly to the wallpaper. But in this case, you will have to wait for the latter to dry completely in order to get the best result. It is preferable to use a special acrylic-based border adhesive. There is no need to dilute it with water, as it is released ready for use. The tube of glue has an applicator with a brush or brush. The glue is applied to pre-cut strips of the border, after which the base is moistened with water. Within 4-5 minutes, the glue should be absorbed.
2. It happens that the border is glued end-to-end with wallpaper. This method of gluing is recommended for wallpapers with high relief (wallpaper with embossed two-layer paper or foamed vinyl). In this case, you can glue the border with ordinary glue for the type of wallpaper used.
3. Another way to glue the border. Along the entire perimeter of the room at the indicated height, a horizontal line is marked with a simple pencil. After that, the upper component (above the border) of the finish is glued. The bottom edge is cut along the marked line with a metal ruler and a sharp knife. The border pre-impregnated with glue is glued end-to-end to the edge of the wallpaper, while its lower edge of 1.5-2 cm is left not pressed against the wall. The wallpaper canvases of the bottom panel are brought under the curb and cut off along the bottom edge. The segment is removed, and the border is finally glued to the wall.

First decide where exactly to stick the border: at the baseboard or under the ceiling, at a distance of 1/3 of the wall or around the door and window.

It will not be superfluous to make sure that the place of the future sticker is not contaminated. You can use soapy water to clean the surface. A clean wall is the key to successful and high-quality work done.

There should be no voids, holes, cracks and other defects at the place of gluing the future border. Since most of the borders are made of loose paper, sooner or later all the irregularities will become noticeable. Holes should be puttied, traces of paint, glue and other stains should be wiped off. Glue is applied to the already prepared surface.

You can purchase a self-adhesive border, but you should not count on it to hold perfectly. Lubricate with glue for greater reliability it does not hurt. Applying the border to the wall surface, you need to carefully smooth it and remove excess glue.

When pasting a border in a corner, try to put the end of the border on the adjacent wall. Glue the other strip with an overlap on the previous one. In this case, there is no gap in the corner.

Pasting interior doors or windows

Taping windows or doors with stripes will add more decorative effect. general view rooms. Here there is one difficulty when connecting the strips: they need to be cut very accurately and connected in a mustache (observe an angle of 45 °).

Try to pick up the strips in such a way that there are no patterns at the joints, large drawing or flowers. Lay the strips overlapping at the junction, and using a diagonal ruler and a sharp knife, make a cut through both strips. Delete the segment from the horizontal border. Bend the edge of the same border and remove the segment of the vertical border. Put the horizontal edge back, press down and iron the seam.

The use of borders is optional, but desirable. Especially in the case when there are 2 border zones in the surface finish of the walls. The choice and use of borders must be approached competently and carefully, since a decorative frame can both narrow and visually expand a room.

Want to better understand why wallpaper borders are needed? Name your favorite accessory. Now imagine that you went to the wedding of close friends without him. You feel inadequate. This feeling evokes room interior where there is no exclusivity.

The paper border is a wall decorative element, presented in the form of narrow wallpaper tapes, suitable both for ennobling the interior and for smoothing minor errors.

Have you finally decided to dilute the plain background of your walls with a wallpaper border? Fine. Picking the right one is easy. If the repair is at the stage of purchasing materials, then a consultant from a specialized store (focused on the sale of wallpaper) will help to correctly arrange the necessary details. On the spot, you can browse through the latest catalog and choose exactly the idea that fits perfectly into your apartment.

Don't have enough budget to visit good hardware stores? Do you do all your shopping at the market? Or maybe you question the qualifications of sellers? In any case, do not despair. You can make a decent choice on your own. The following information on wallpaper borders will help you with this. So, let's begin.

Where do experts never glue wallpaper borders?

Wallpaper borders are a versatile decorative finish that can be used in almost any space, from the bedroom to the work office. By the way, recently the line of models was replenished with moisture-resistant curbs that do an excellent job with high humidity. Now they can be glued even in the bathroom. Do not forget that the scope of application of borders is not limited to wall decoration. Check out our design tutorials and you'll be amazed at how skillfully you can transform an old chest of drawers or a mirror with a few narrow wallpaper tapes.

Usually there are two ways of pasting walls with a wallpaper border

• Edging around the ceiling (around the entire perimeter).
• Pasting in the lower third of the wall surface. This variant is especially interesting, since its correct implementation can smooth out the difference between different colors selected wallpapers (for example, when a cold tone is pasted at the bottom, and a warm one is at the top).

This edge arrangement is also gaining popularity, when it is glued in a vertical position instead of the usual horizontal one. This arrangement allows you to focus on the functional areas of the room or highlight the purpose of a particular area.

Due to poor-quality repairs, when wallpaper blanks were cut incorrectly, the lower level of the wall may be clumsy and incorrect. In this example, well-chosen edging can mask flaws, but it will only look good if they are chosen correctly. Let's consider further how to do it.

Nuances of choice

• All lanes have their own classification, which must be studied as a matter of priority. The fact is that each type of room has its own functionality, and therefore it should be decorated individually.
• It is customary to combine wallpaper strips by color or applied pattern (it is important that the interior is designed in the same style). However, try never to choose colors that would give the room an overly bright, aggressive or vulgar tone.
• The materials chosen for pasting the room must be of the same quality. So, a paper border should be combined with paper wallpaper etc. Ignoring this rule will quickly affect not only the appearance, but the long-term performance of pasting.

Features of different types of borders

• Paper frame. Differ in that it can be glued and removed without special efforts. Among the shortcomings can be noted the instability to mechanical damage(cannot be processed detergents), fragility, and sensitivity to sunlight (burn out).
• Vinyl edging. Great for bathrooms, hallways, and other high-pollution areas. Gluing them and caring for them is easy, since all the disadvantages of paper-type stripes are absent.
• Acrylic edge. It absorbed all the characteristics of vinyl, however, due to the application of an acrylic emulsion to the base, it costs a little less.
• Textile edging. Its peculiarity lies in the dense structure resulting from the adhesion of two layers (fabric and paper).

How to glue a border on wallpaper?

It is necessary to stock up on inventory and necessary materials. You will need:

• glue, which is selected depending on the type of wallpaper chosen;
• ladder;
• desktop (required for cutting wallpaper and stripes);
• roller;
• brush;
• scissors.

Immediately before gluing, each strip must be checked for defects and flaws. Unfortunately, marriage is quite common.

Pasting algorithm

• Preparing glue. Carefully read the manufacturer's instructions, as some types of mixture are diluted non-standard. As a general rule, the dry mixture is poured into a volumetric vessel with water, slowly mixed and infused for 20 minutes. After that, the composition must be re-mixed until a homogeneous mass (without lumps). If you bought glue mixed with acrylic mass, then you do not need to dilute it with water. Such a mixture can be used immediately, and the brush built into the tube greatly facilitates this process. By the way, it is the acrylic base that provides the perfect fight.

Incorrect preparation of glue in the future may affect decorative features wall covering. Therefore, do not be too lazy to perform this simple action correctly. Otherwise, you will have to re-glue.

• We do calculations. If wallpaper borders glue only on the wall, you first need to measure the length and width of the room, and then multiply the resulting value by 2. Such a simple action will allow you to correctly calculate the required number of blanks.
• We cut the borders and slightly moisten them with water.. Everything is simple here, the main thing is to strictly adhere to the markup.
• We prepare the surface. In order for the strips to be glued evenly, the walls must first be cleaned of dust. This is done with a brush.

The drier the base, the more secure the curb will hold. Therefore, be sure to wait until the wallpaper is completely dry.

• The blanks are treated with glue and left alone for 5-10 minutes.
• We glue the borders in the intended area. Pay special attention to the corners. Traditionally, it is in them that the most difficulties arise.
• When the whole room is processed, go around the perimeter and check again that there are no drops of glue left on the surface. Remove if necessary.
• Let the borders dry.
• If the material used is created on a self-adhesive basis, then before large-scale pasting it must be tested on small plot. To increase the level of coupling, you can additionally treat the strips with glue.

Now consider the main parameters by which the wallpaper edge is selected.

What to look for when choosing a frame?

• The style of the interior and the selected wallpaper (combination of color and picture). Any ornamental border that fits into the general background is suitable for plain wallpaper. If used in the room, then the edging can be selected for any of the dominant colors (or pattern). Keep in mind that in specialized stores, wallpapers are sold complete with an accompanying frame.
• Size. The state standard provides for various lengths (5-10 meters) and widths (starting from a couple of centimeters and ending with meter-long specimens).
• Do not forget to match the material of the edging and wallpaper sheets ( vinyl wallpapers- vinyl edging; non-woven - textile frame, etc.).
• Wallpaper strips in the bathroom and children's room should have different parameters of water resistance and strength. The same goes for the rest of the rooms.
• The texture of the border is embossed and smooth, and can also be made of lace, gold and other coatings. It all depends on the individual preferences of the user.

Recently made repairs and think that you do not need wallpaper borders? In vain. You may need them ahead of time. Indeed, almost no manufacturer can guarantee that its wallpaper sheets will last in their original form for the desired number of years. Also remember what kind of canvas children like to create their masterpieces on. Right. These are all wallpapers.

Do repairs competently, and let your interior fill with a warm, abundant atmosphere. Good luck!

Wallpaper border (or frieze, edging, edging, border tape) is made of various materials a strip of small width, which is glued on top of the wallpaper or in places where they are paired with other materials. Choosing the right edging is not so difficult. This article describes in detail what you need to consider and what nuances you should pay attention to before buying a wallpaper border.

Often when buying wallpaper in addition to the main finishing material it is proposed to purchase such a decorative element as borders. This product allows you to complement the appearance of the room, highlight significant design details, adjust the visual size of the interior space, hide finishing errors, set boundaries at the joints with other materials.

Almost any specialized wallpaper store has border tape catalogs. The buyer can choose it independently from the offered assortment. However, many manufacturers greatly simplify the selection task by providing one or more border options with the wallpaper model.

As a rule, the manufacturer offers two combination options: by color or by pattern. For example, light-colored green wallpaper with floral patterns goes well with a white or dark green border with or without the same pattern. In the case of a monochromatic coating, you should opt for a frieze of a similar shade with some kind of print. Such an addition will enrich the design of the room and make it more refined and attractive.

It is important to choose a border that will be in harmony with

Useful advice! In one collection, you can find wallpaper and border tape with different patterns. This combination may not look very good in small room, too oversaturating the appearance of the walls and drawing too much attention to them.

Another option from manufacturers are wallpapers and borders with the same image. For example, the first ones are decorated with large geometric figures, and the edging is identical in color and shape, but smaller. It should also be taken into account that the wall covering should be combined not only with the frieze, but also with other design elements.

With regard to choice colors it must be said separately that a very colorful ribbon is appropriate only in rooms where the emphasis is on the walls. At the same time, even lockers and other furniture items are not planned to be hung. However, there is one type of room where the use of bright colors is justified - a nursery.

When a child reaches a conscious age, caring parents often want to wallpaper his room with wallpaper of the theme that interests him at the moment. This is the main mistake, since the hobbies of a young child usually change very quickly. It is much more expedient to choose a curb tape “by interests”. Replacing it will be much easier, cheaper and faster than completely re-gluing the entire covering in the nursery.

The walls themselves are executed in a neutral positive color. It is worth remembering that too bright and defiant room can cause anxiety in children.

The choice of material for the execution of the border tape for wallpaper

There are several options for making a decorative frieze.

Paper border for wallpaper. This option is subject to ultraviolet rays, pigment burnout, as well as mechanical damage during cleaning. Such framing in repairs can be used if relatively frequent changes in the interior of the room are foreseen. The main advantage is the ease of pasting and removal. All this is worth taking into account before buying a paper border for wallpaper.

Vinyl framing. It is more practical, durable, strong, less prone to fading, easy to clean with wet cleaning. Vinyl tape is well suited for hallways, kitchens, bathrooms and other high-pollution areas.

Acrylic piping. It includes all the advantages of vinyl, but has a lower cost due to the use of acrylic emulsion in it.

Textile edge. It has a two-layer structure of paper and fabric, resulting in a high density and strength of the coating.

How to place a wallpaper border on the wall

It should be noted right away that the edging is never glued in the center of the wall. Otherwise, visually the room becomes lower. The ideal location is 1/3 of the height from the floor. In this case, the strip becomes the boundary between the wallpaper. different kind. One of the classic examples of the combination is "striped wallpaper - edging - patterned wallpaper." The choice can also be made in favor of plain wallpaper, while the lighter ones are glued at the top, and the dark ones at the bottom.

The framing arrangement described above is especially relevant when pasting the kitchen. Practicality is the main factor here. Often, a more expensive coating is glued to the top of the wall, and special washable wallpaper and vinyl or acrylic piping cover the work area.

The most common location for a decorative border for wallpaper is under the ceiling. At the same time, it partially replaces the ceiling plinth. It must be taken into account that it is recommended to choose frieze pasting at the very top of the wall only for large spacious rooms. This emphasizes the beauty of the ceiling, makes the room more comfortable and cozy, corrects its visual dimensions.

Useful advice! ABOUT wallpaper edging can be pasted vertically. This allows you to visually highlight a specific section of the wall or functional area. You can edging doorways, mirrors, furniture, etc.

Very rarely, the border tape for wallpaper is located at the bottom near the floor. This technique can be used if a mistake was made when measuring the height of the wall and the wallpaper turned out to be a bit short after cutting. There are also cases where low-quality material shrinks when it dries.

Related article:

Wallpaper types. How to choose wallpaper for apartment rooms: living room, bedroom, nursery. Wallpaper for walls: catalog of photos and prices for different kinds wallpaper.

Also, the tape is glued to the ceiling and, like a mirror image, immediately below it on the walls. This arrangement visually adjusts the size of the room and its appearance.

Tips for preparing and applying wallpaper edging

When pasting wallpaper absorb moisture and become more susceptible to mechanical stress and pollution. Therefore, you should let them dry well and only then proceed with the application. wallpaper borders. The drier the surface, the better the adhesion of the two materials after application.

Adhesive for borders polymerizes (dries) rather quickly. Therefore, in the absence of much experience, the pasting process should be divided into stages. This avoids situations when the smeared edging has dried up and become unusable. It is also worth making sure in advance that all necessary tools.

Some wallpaper has a pattern with horizontal guides that you need to navigate. The lack of parallel between the frame and the main wall pattern can be very noticeable and negatively affect the visual perception of the design.

When cutting, the pieces need to be made a little longer, which will allow you to compare the images. This is true for borders with a pattern.

It is necessary to carefully check the surface of the walls on which it is planned to place the tape. Any irregularities will sooner or later appear due to the thin material of the execution. It is necessary to cover up all the bumps, cracks, remove the remnants of paint or glue.

When using self-adhesive wallpaper edging, you should not rely entirely on its quality. Over time, it may begin to fall off. Therefore, it is much more expedient to additionally lubricate the surface with glue when placing than to solve the problems that have arisen in the future.

Sometimes the wallpaper border is glued end-to-end with the main coating. This is true for varieties with a developed or high relief (two-layer wallpaper with embossed or with an additional layer of foamed vinyl). In this case, ordinary wallpaper glue is used.

Necessary tools for applying a border on the wall

To glue the frieze, you will need the following tools.

Level. It is very important to observe a strictly horizontal arrangement of the edge, which allows you to perfectly match the border around the entire perimeter of the room and not spoil the appearance of the interior.

Smoothing roller. Serves to expel bubbles and excess glue. This tool can be replaced with a plastic spatula or a soft sponge. However, the roller has an advantage: the likelihood of displacement when smoothing the wallpaper border tape is minimal.

Brush. The surface on which the frieze is glued must be as clean as possible. A soft brush will help get rid of dust immediately before pasting.

Sponge or absorbent cloth. It is needed to remove excess glue from the wall. The fabric should not be fluffy. It is best to use natural white linen or cotton fabric so that the cloth dye does not smear the coating when wet.

glue roller. Can be replaced with regular paint brush. However, it should be noted that when pasting the pile can cause a lot of inconvenience and slow down the work. If one person is pasting, it will be quite difficult for him to simultaneously hold the plastered frieze and at the same time get rid of adhering debris.

Wallpaper glue. When choosing an adhesive, it makes sense to additionally consult with the seller at the time of purchase, indicating the material of the frieze and on which surface it should be applied.

Stepladder or table. If you plan to place the curb on the walls in the upper part, then you will need a stepladder or a sturdy table that can support the weight of a person. It is necessary to remove in advance all objects that interfere with movement along the perimeter of the room. This will also reduce the chance of further injury from falling from a height.

Desktop. Necessary for placing the tape when spreading. The work surface must be thoroughly cleaned of dirt and can be covered with plastic wrap to avoid any contamination during operation.

The process of gluing a decorative border for wallpaper

Before proceeding with the main operations, once again make sure that all the necessary tools and materials are available. Remove all unnecessary items from the room or protect them from accidental contamination, conveniently position the work surface.

Glue preparation. It is strongly recommended that you carefully study the manufacturer's instructions, as some adhesive mixtures are diluted non-standard. According to general rules, the dry mixture is placed in a container with water and slowly mixed. The subsequent infusion process takes approximately 20 minutes. After this time, the glue is re-mixed until a homogeneous mass without lumps is obtained.

In the case of using an adhesive mixed with an acrylic mass, mixing with water is not required. Such material can be used immediately. It should be noted that thanks to the acrylic base, an ideal adhesion to the surface is ensured.

Note! Incorrect preparation of the adhesive will subsequently affect the decorative features of the wallpaper edging. Therefore, it is worth taking this step responsibly. Otherwise, the tape will have to be re-glued.

markup. In order for the edging to be glued evenly, you need to mark in advance with a simple pencil the location of its location. This will greatly speed up and simplify the subsequent work and make its result ideal. For marking, a level and a long ruler (or other straight guide for drawing) are used. The greater the distance between two points when drawing lines, the less likely the deviations.

An interesting approach that greatly speeds up the process of drawing lines is the use of a guide line. At the same time, you can mark as much as you like in one step long wall. However, for such work, at least three people are needed: two for maintaining the guide and one for drafting.

Tape cutting. This step is very simple, but requires special care. After the surface is marked, measurements are taken and pieces of wallpaper border tape are cut. If the length is chosen with a small margin, the process of combining joints can be greatly simplified. Excess can be neatly trimmed immediately after being placed on the wall.

Glue application. Glue is applied to the curb tape with a brush or roller. The greased edging is left for 5-10 minutes. This time can be used to once again go over the surface of the wall with a brush and remove settled dust.

Applying the edging. The wallpaper border is neatly placed on the wall according to the pre-made markings. When gluing in corners, the end of the tape must grip the adjacent wall. The next strip is glued with an overlap, the allowance is 5-10 mm. This avoids gaps. Do not make sudden movements and strong bends. Otherwise, the border may break.

After application, using a special roller (or a clean cloth), air bubbles and excess glue are expelled from under the material. Next, excess glue is carefully removed with a cloth or sponge. After the entire perimeter of the room has been processed, the curb glued to the wall should dry well. Drying time depends on the selected adhesive, but often up to 24 hours.

Border for wallpaper around the perimeter of openings

Highlighting door or window openings with decorative tape will be a spectacular decoration and addition to the overall design of the room. The main difficulty here is that the pieces of tape must be connected at an angle of 45 degrees.

To get the perfect joint, you need to place a vertical and horizontal stripes overlapping, one on top of the other. Immediately after that, attach a ruler along the line of the future joint (diagonally) and draw with a sharp knife, cutting both layers. Next, fold the edges and remove the trim. After that, return the parts of the joint to their original position and carefully smooth out, while removing excess glue.

Choosing and applying a border to a wall is a simple task that even the first time can do it. However, it is worth remembering that what in theory seems new, original idea- in practice, it can give far from the expected result. Therefore, it makes sense, if not to be guided, then at least to take into account the well-known rules and recommendations of specialists.