Wall decoration options in the hallway: advantages and disadvantages of different options. Finishing the corridor in the apartment How can I finish the corridor in the apartment

The corridor or hallway is the room where the tenants of the apartment first of all get when they come home from the street, so pollution and damage are sure to appear on their walls over time. If there are small children or animals in the apartment or house, then the decoration of the lower part of the wall will certainly be in a special risk zone. Therefore, when starting repairs, you need to carefully consider how to finish the walls in the corridor so that the material is resistant to most mechanical influences.

In addition, it is necessary to take into account the fact that the entrance hall is usually the “face” of the apartment, setting the tone for the interior design of all rooms, which means that one cannot but think not only about the strength qualities of the material, but also about its aesthetic side.

A large assortment of modern materials, which today can be found in hardware stores, makes it possible to choose a finish for any request in terms of style and financial possibilities. However, before dwelling on one of the many design options, you need to consider the positive and negative aspects of the chosen approach.

wood finish

The tree has not gone out of fashion for many centuries, thanks to its amazing qualities that create the most favorable microclimate in the premises of the apartment. For finishing the hallway and corridors, wooden cladding materials produced in the form of lining or panels are suitable, depending on the chosen design style.

Natural lining

Wooden lining is a more affordable material compared to natural panels. It is manufactured in various forms, so it is possible to use it to create an interior that matches different styles.

Several types of lining are produced, but all of them are used when decorating a corridor in such styles as Provence, Country or Russian hut.

Wood is a material with a structure that does not conduct heat well, thereby keeping it indoors, so walls sheathed with it will always be warm to the touch. In addition, such a finish can partially reduce the level of noise coming from outside.

Wooden lining is often called a tongue-and-groove board in a different way, although this is a contradiction - such a term is more suitable for floor boards that do not have an external relief. However, a board with a smooth, non-profiled outer surface is often a good material for finishing walls in hallways and corridors.

The lining is classified, in addition to the type of profile, according to quality features - it is customary to distinguish between classes "extra", "A", "B", "C".

• "Extra" is the lining of the highest class, without defects and the core of the trunk.
• "A" - a class of material, also of high quality. In the production of this lining, wood is selected, on which one knot per 1500 linear millimeters is allowed on the front side or edge, as well as up to two non-through and small cracks on the back side of the board.
• "B" - a class of lining, which has a lower quality, so it can have up to four knots for every 1500 p. mm, with a diameter of up to 20 mm. It is also allowed up to two non-through cracks, darkening and streaks.
• "C" is the lowest class of finishing material. It can have knots up to 25 mm in diameter, several cracks up to 5% of the length of the lamella, bluish and dark stains, and even mechanical damage. This material has a low price, so it is often used for the manufacture of crates. If such a lining is planned to be used for decorative cladding, then it will have to work a lot on it, cleaning the surfaces and repairing flaws.

Any of the classes is suitable for lining the walls of the corridor, but some of them can be used in their natural form, that is, while preserving the textured pattern of the tree, while others must be painted to mask the damage repaired with putty.

The lining is made from various woods, both coniferous and hardwood. The most affordable material can be called pine, linden and aspen, and the most expensive finish is lining made of larch, cedar, oak, alder and ash.

The lining can be installed on the walls horizontally or vertically, depending on the effect you want to get. If the hallway or corridor is narrow and long, then it is best to mount the lamellas vertically, otherwise the room will seem even narrower and longer. In a square hallway, the lining can be fixed in different ways, as planned by the design. To give the room originality, you can apply combined option fastenings, that is, sheathe one wall horizontally, the other vertically, or even combine different directions on one wall.

Natural massive panels

More expensive natural wood finishes are massive panels, which can completely sheathe all the walls, one of them, or only the lower sections are decorated with them. For the manufacture of this material, mainly expensive hardwood is used, which has a beautiful textured pattern, such as beech, oak, alder, cedar, ash. However, all these breeds have a high price and are not always affordable for a family with an average income. To reduce the cost of their production, most often different types of wood are combined with each other.

For example, the base of the panel is made from a less expensive material - it can be pine or spruce, and then its front side is covered with two or three layers of fine wood veneer. The veneer is fastened to the base using a special hot pressing technology, which gives the panels increased strength.

Panels are also made from plywood, which is also veneered, and then varnished or waxed.

Wall panels, depending on their design, can be applied in different styles - these are classics, classic English, Victorian, modern, neoclassicism, rococo and other areas.

Advantages and disadvantages of wood finishes

If we talk about negative aspects finishing the corridor with wood, then they practically do not exist, since it is devoid of flaws, with the exception of the high price of some of its options. But on the other hand, it has many more advantages than any other material.

• Wood has excellent strength and resistance to mechanical stress, therefore, with proper processing, the finish is not afraid of the claws and teeth of pets.
• The environmental friendliness of wood is undeniable compared to others faux finishes, so this design is able to create a favorable microclimate for the residents of the apartment.
• The durability of the wooden finish will allow not a single dozen years to resort to repairing the hallway.
• If you want to change the interior design of the room, the finish can be easily painted in one or more colors.
• The ease of installation of any type of wood finish, with the necessary tools, allows you to carry out this process on your own.
• Each type of wood has its own textured pattern and colors, so choosing exactly the option that will appeal to the owners of the apartment and will fit well into the planned interior of the hallway will not be difficult.
• Wood paneling, well-fitting boards and clapboards pair well with a wide variety of materials, such as wallpaper or artificial stone, so this finish provides ample room for imagination when developing an interior project.

Wallpaper finishing

In spite of a large number of new finishing materials that have recently appeared in the public domain continue to be popular, not only for living rooms, but also for the corridor or hallway.

But, as you know, wallpaper is a rather thin material that is prone to damage and pollution. Therefore, if there is no perverse desire to renovate the corridor every year, then it is best to combine them with more durable finishes, such as wood, plastic, chipboard or MDF panels or artificial stone.

It is especially important to choose a combined option if there are animals in the house. Well, in the event that he lives in an apartment Small child, and it was decided to finish with wallpaper only, then their washable version is best suited.

If earlier only paper wallpapers could be found in stores, then today the range of this finishing material is extremely wide. So, for a hallway or corridor, non-woven, vinyl, fiberglass, metallized and photo wallpapers can be suitable. You should not choose textile finishing cloths for decoration of these rooms, as dust can accumulate in them, which can cause the development of allergic reactions.

To make a choice, it is worth considering a little more in detail the most popular types of this material.

Non-woven wallpaper

The non-woven version of the wallpaper consists of two layers - a base made of non-woven cellulose fabric, as well as an upper polymer coating. This type of material is not strong enough, but is able to hide small flaws in the walls. It does not shrink when pasted, wear-resistant, environmentally friendly, easy to self-assembly, since when finishing, the glue is applied only to the wall.

Non-woven wallpaper is suitable for decorating not only walls, but also the ceiling. If you need to change the interior, they can be painted in the desired color.

If a cat can reach the non-woven wallpaper, it will gladly sharpen its claws on them, so it is best to combine them with high, durable panels.

Vinyl wallpapers

Vinyl wallpapers also consist of two layers - a base made of paper or non-woven fabric, and a decorative PVC coating, which can have different thicknesses and reliefs. This coating has many varieties, and one of them, which has become especially popular, is “silk-screen printing”.

Vinyl sheets have high strength and wear resistance, they are inert to ultraviolet radiation and retain their original color for many years. Such wallpapers can be called washable, as they are easily amenable to regular wet cleaning. The variety of colors and textures of this material is so great that they can be matched to any interior style.

If this particular finish is chosen to decorate the corridor, then it is not recommended to purchase wallpapers of dubious quality due to their low price, as they can be toxic. The best option for any of the rooms would be non-woven fabrics, as they are breathable.

fiberglass wallpaper

Wallpapers based on fiberglass have increased strength, as they contain strong fibers in their composition. This is an environmentally friendly material that can be painted after wall gluing with water-based or latex-based paints. Wallpapers are highly wear-resistant, their service life is about 30 years, and during this period they are able to freely withstand up to 15 repaints. The material does not crack at the corners when the structure shrinks, it does not burn, is water resistant and is not a nutrient medium for microflora colonies.

Wallpapering the corridor with wallpaper can be done independently

Many owners have already tried their hand at carrying out such a finish with their own hands. But if there is no relevant experience, then before starting this work, we recommend that you read the article on our portal.

Wall mural

Wall murals are made from various materials- they can be paper, non-woven, vinyl and fabric. For the corridor, it is best to choose a vinyl or non-woven version, as they have the characteristics suitable for this room.

Finishing material is also subdivided by texture. So, on sale you can find:

— Wallpaper with a smooth glossy and matte surface.

- Embossed wallpaper imitating sand, canvas and other fabric weaving, as well as a variety of three-dimensional drawings.

This finishing material can be decorated with images with different effects:

• Background photo wallpaper decorated with frequent floral or other patterns, arranged in a certain order. They differ in that they do not have a specific plot. This option is suitable for decorating a corridor or hallway, but it is necessary to choose washable varieties or combine them with other materials.

Background decoration, depending on the choice of color and pattern, can visually expand or reduce the area of ​​​​the room being decorated.

• Panoramic wallpaper have images of natural or modern urban landscapes, balconies or small courtyards. They can also create a room-enlarging effect, so they are the best suited for decorating narrow rooms.

• Photo wallpaper with realistic images are also often used to decorate the walls of corridors - these are photographs of flowers, grass, flowering trees, etc. Most often, these canvases have a three-dimensional 3D effect that creates the illusion of expanding space, or HD, in which the drawings have the clearest detail.
• Subject photo wallpaper , on which large images of one or more objects are applied, are better suited for rooms with large areas, since in small rooms they will look ridiculous and visually reduce them. For a corridor, this is not the best option.

Have you tried wallpapering?

The question is not idle, since this finishing operation is quite complex, replete with nuances. in order to avoid mistakes and not spoil expensive material - read in a separate publication of our portal.

cork finish

Cork, which has antistatic properties, is fire-resistant and non-hygroscopic, resistant to deformation, ultraviolet, and most importantly, to mechanical stress, will be an ideal finishing option for the corridor. Due to the strength of this material, it is not afraid of the claws and teeth of animals. Cork is an environmentally friendly material, it is very light in weight, which simplifies its installation on walls.

plastic panels

Cork is a natural material that perfectly insulates the room and makes the walls warm and pleasant to the touch. Cork finishing is produced in different versions - it can be wallpaper, plates and rolled cloth on a self-adhesive basis. The color scheme of the finishing elements is diverse, as it can have a large number of options, both plain and interspersed with different shades.

Cork finishing materials are made from oak bark growing in the Mediterranean. Veneer is cut from the removed bark, whole panels are prepared, or it is crushed into crumbs, followed by the production of wall and floor tiles, rolled materials, without core or having paper base wallpaper. Cork is used to decorate not only walls, but also other surfaces of the room.

In stores, you can find cork materials that require additional processing - they have a lower price. However, it is better to purchase a finish that does not need to be additionally applied with protective agents, since if this process is carried out incorrectly, it is quite possible to spoil the appearance of the coating.

• Cork panels

Cork tiles or panels are made on a plywood or MDF basis, on which tongue-and-groove joints are made. This allows you to assemble individual elements into a single coating with almost invisible seams.

Another version of cork slabs consists of three rather thin layers - the lower one, which serves as the basis, the middle one, and the upper decorative one, interconnected with natural glue. This finishing material is decorated with cork veneer.

• Roll web

Rolled cork cloth consists of two layers - pressed crumb, which is the basis, and decorative thin veneer. Cloths are glued on the surface of the walls and floor butt. After installation of such a finish, the sheets merge into a single coating with invisible seams of joints.

In addition to decorative, technical cork roll coatings, which are used as substrates for other types of finishes. They are used as an effective insulating and soundproofing material.

• Cork wallpaper

Cork wallpaper has a thickness of 1 to 4 mm. They can be baseless, like a roll web, or paper serves as the basis for them. Therefore, they are glued to prepared walls in much the same way as ordinary wallpapers, but, unlike them, they are able to mask small flaws on surfaces.

It should be noted that any cork material goes well with other finishes, so you can develop and implement various combined options.

Cork flooring is well suited for finishing walk-through rooms, both in terms of aesthetic and technical characteristics. The only thing that can stop you from choosing it is a rather high price.

Wall decoration with bamboo

Finishing the corridor with bamboo is an excellent choice, as this material is highly durable and is not afraid of mechanical stress. In addition, it is an environmentally friendly and durable, easy-care material that can be cleaned with a vacuum cleaner or a damp cloth.

Bamboo trim is produced in different forms - it can be rigid panels or wallpaper mats assembled from slats of different widths.

• bamboo panels

For the manufacture of bamboo panels, one-piece trunks or their halves are most often used, but sometimes they are also assembled from slats glued to the base. They consist of one or two layers, are produced by hot pressing, while they can have different dimensions and thicknesses.

Bamboo pairs well with other finishes such as wallpaper or tiles that mimic flat stone options. Most often, panels are used to decorate the lower part of the walls, which are more in need of their protective functions. Bamboo is not afraid of cat claws and any pollution - the latter are easily removed by all available means. On the wall, the panels are fixed with the help of “liquid nails”, and installation, as a rule, does not pose any difficulties.

• bamboo wallpaper

Bamboo wallpapers are made from slats, on which the inside of solid trunks is unfolded. The thickness of the canvases can vary from 3 to 5 mm. The slats are stitched with a thick strong thread, which makes them look like mats (which, by and large, they are). Most often, rolls of 10 × 0.92 m are found on sale.

Another version of the wallpaper made of this material has a base of technical gauze or rice paper, on which slats cut from the outer smooth part of the trunk, which is its bark, are glued. The width of the slats is from 8 to 20 mm, and the thickness is 1÷2 mm. A roll of such wallpaper has standard parameters, its length is 10,000 mm, and its width is 2500, 2000, 1500 and 1000 mm.

Wallpapers are produced in different design options - they can be plain or have a natural pattern characteristic of this material.

a natural stone

For its decorative qualities bamboo wallpaper almost indistinguishable from panels. They can be combined with each other, but for this you need to choose harmonizing shades.

Bamboo wallpapers are fixed to the wall with PVA polymer glue. It is recommended to level the walls with drywall before their installation, on the primed surface of which they are fixed quite easily. If the material will be glued to another, more complex surface, then it is better to use “liquid nails” for installation work.

Plastic panels

PVC panels are an affordable and easy-to-install material that can, nevertheless, significantly transform any room. Such cladding provides great opportunities in planning your own version of the interior of the corridor, as it is produced in a rich variety of colors, ornamental and relief patterns, with a very reliable imitation of natural materials - the texture of wood, stone, sand, etc.

This material is very popular due to its aesthetic appearance, durability and relative strength. The panels are easily put in order with the help of wet cleaning, so they are perfect for finishing the walls of the corridor, both the lower part of the wall and all surfaces completely.

If PVC panels are chosen for finishing the corridor, then the repair will take place quickly and relatively cleanly, without unpleasant odors paint and spilled glue.

With the help of this material, it is quite easy to level the surfaces of the premises, it becomes possible to hide cables and communication pipes without digging the walls. In addition, soundproofing material can be placed behind the panels.

Panels produced for interior decoration, are an environmentally friendly material that does not emit harmful fumes.

The advantage of PVC panels is also that such a coating will not attract animals to itself, as it has a smooth surface that is not easy to grab with claws.

In order for the finish to meet all the qualities mentioned above, you should not purchase cheap materials. The stiffening ribs installed inside the panel should not be visible through the outer solid layers of plastic, and when pressed with your fingers, they should not be crushed.

The surface of the panels should not have deformations and dents, and the joining of individual lamellas should be easy, with the tongue fully entering the groove.

It is impossible not to recall that for the decoration of corridors and hallways it is necessary to choose PVC panels with a flammability category G1 or NG. They have a special treatment that makes them more resistant to ignition and melting even when heated to extremely high temperatures. This circumstance must be taken into account in order to emergency situations the exit from the apartment was not blocked by strong and toxic smoke or even open fire.

The process of installing PVC cladding on walls is available to everyone!

Any more or less “savvy” with basic building skills, the owner is able to perform such a cladding. How it is produced - read in a separate publication of our portal.

MDF or fiberboard panels

MDF is a fibreboard obtained by dry pressing fibers using carbamide resins. The outer side of the panels is decorated with a coating imitating natural wood different breeds or other natural materials. Some panels are covered with a special protective film This process is called lamination.

In addition to MDF, fiberboard panels are also on sale, which have a lower cost, but experienced craftsmen still recommend choosing the first finishing option.

The essential difference between these materials lies in their technical characteristics:

• MDF is a safer material than fiberboard, since the latter uses phenol-formaldehyde resins as a binder, which emit toxic fumes that can harm the health of apartment residents. MDF, from this point of view, is incomparably cleaner.
• The strength of MDF is much higher than that of fiberboard finishes. Such panels are more resistant to external mechanical influences, which is very important for a room such as a corridor.
• MDF, unlike fiberboard, has a water-repellent coating that allows wet cleaning walls without much regard for the frequency of this process.

However, for all its merits, MDF has a high flammability category - G4, and different models Fiberboard, this parameter can be lower - from G1 to G4. Therefore, when choosing a finish, you must definitely pay attention to this characteristic.

Installation of both MDF and fiberboard is carried out in the same way, approximately the same as for PVC panels and natural wooden lining: along the batten guides installed vertically or horizontally.

MDF panels are produced in different dimensional standards. Thickness usually varies from 6 to 14 mm, width - from 98 to 325 mm, and in length they are 1300 or 2600 mm, that is, they are perfect for filling floor-to-ceiling space in a standard city apartment.

MDF panels are produced in several variations, which are divided according to the production method, characteristics and color features. They may be:

• Whole-pressed.
• Laminated with a smooth glossy surface.
• Moisture resistant, designed for rooms with high humidity.
• Veneered, imitating the finish of natural wood or cork.
• Painted with a special paint that can smooth out irregularities and create a glossy or matte surface.

Fake diamond

Artificial is becoming quite popular material for finishing the corridor. decorative rock. They either completely lay out the walls, or combine it with plastered or otherwise decorated surfaces.

Gypsum and cement based stone

The most common, which is used for decoration, is made on the basis of cement or gypsum using various plasticizing additives. This finishing material can be characterized as follows:

• A wide variety of relief patterns and shades of artificial stone perfectly imitates a wide variety of natural materials.
• Sufficiently high strength indicators guarantee the durability of the finish with properly executed masonry.
• In case of accidental damage to the surface of the stone, they can be easily restored on their own, the main thing is to determine exactly what material it is made of. If the base is gypsum, then the restoration should be done only with this material (the same applies to cement).
• If you have experience in laying ceramic tiles, it will not be difficult to finish the walls with artificial stone yourself.
• Artificial stone also has several disadvantages:
• Low resistance to abrasion of the surface of the material. Therefore, it will be necessary to periodically update the color or immediately cover the surface of the stone fixed to the wall with a varnish with high surface resistance (for example, polyurethane).
• The cost of such a finishing material is quite high.

You can make artificial stone yourself!

If you want to save on the purchase of material and try your hand at this craft, the reader should read the article, which is located on the pages of our portal.

In addition to the above materials, more expensive ones are also used for manufacturing - they make a more durable artificial stone that is not subject to abrasion and mechanical damage.

acrylic stone

This kind of artificial stone is made from 75% mineral natural environmentally friendly materials that exude from white clay. In addition to it, it includes stone chips - it can be marble, granite, jasper and other minerals. The binder for the ingredients is acrylic resin (polymethyl methacryl). The color scheme is created by special natural pigments that are harmless to humans.

Thanks to all the above components, acrylic artificial stone is very wear-resistant and durable material, so even elements such as kitchen countertops and sinks.

quartz stone

Quartz artificial stone is more durable than acrylic, as it contains about 90% natural crushed quartz. It is more resistant to scratches and any other damage, and is also used not only as a decorative finish, but also for the manufacture of durable kitchen countertops.

Polyester resins serve as a binder for quartz and color pigments - thanks to these components, the material is stronger than granite. In addition to strength, quartz stone has such qualities as environmental friendliness and resistance to the appearance and development of microorganisms harmful to humans on it. This material is light in weight and easy to care for, it does not absorb dirt, and it is enough to periodically wipe it with a damp cloth.

Indoor walls, from a technical point of view, have no restrictions, since it is not combustible and does not contain substances harmful to humans. However, it is necessary to show a sense of proportion, otherwise the apartment will resemble some kind of cave. Therefore, most often stone trim is combined with decorative or ordinary plaster, and sometimes even just with wallpaper.

The stone is most often laid around doorways, or they get off the corners of the room, which will contribute not only to the decorative design, but also to the protection of the most vulnerable places on the walls to damage.

Single inserts of stone on the plastered surface of the walls are also possible. The main thing is to correctly think over the color scheme and correct location finishing material.

Now, after getting acquainted with what finishes are best suited for the walls of the corridor, it will be easier for the reader to choose the best option, given the quality of the materials, the design style and, of course, their own financial capabilities. And let the video selection below with very interesting design solutions decoration of the corridor in the apartment.

Video: There is a lot to learn - design options for finishing the corridor

The entrance hall is the first thing that everyone who enters the apartment sees, which means that it would be nice to think about a good finish. Wall materials should combine both practicality and beauty. Ideas and methods of decor can be very diverse, it is important that the selected coating is easy to clean and does not wear out from constant touching with bags, bicycles, strollers, etc. It is better to choose lighter colors of materials, because there are no windows in the hallway, but first things first .

hallway design

Basic requirements for wall covering

The list of requirements for the materials used is not as long as in the case of a bathroom, kitchen or nursery - rooms that require certain conditions to be met. Most important quality which coatings must have is wear resistance. The fact is that even a tiny entrance hall is the most passable place in the apartment and the load on it is maximum. Accordingly, any options for fragile and delicate materials are not appropriate here. Materials must be resistant to accidental mechanical damage so that the claws of animals or metal parts dimensional objects did not leave scratches on the walls.

The second important requirement is ease of maintenance. Surfaces should not only be easy to clean, but in principle almost not get dirty. The entrance hall is the place where everyone, coming from the street, brings dust and dirt, and in winter also snow, after which dirty stains remain.

Ideas for wall coverings

There are many materials for decorating the walls of the hallway, and there really is plenty to choose from. picking up suitable options finishes, keep in mind that it should be in harmony with the overall design of the apartment. The most popular types of wall decoration materials:
wall panels (they can be wooden, plastic or MDF);

• laminate flooring;
• 3D panels with three-dimensional patterns;
• dye;
• wallpaper;
• plaster;
• finishing stone;
• frescoes;
• ceramic tile.

The choice of coverage depends only on your imagination, taste and financial capabilities. To better understand which of these is suitable for your hallway, you need to learn more about each of the materials.

Wall panels (plastic, MDF)

Plastic panels

There is an opinion that paneling is more suitable for office space, rather than apartments, but in reality this is prejudice. On the market of finishing materials there is a wide variety of models made in different colors and differing in different textures. Properly selected materials will look very stylish on the walls of the corridor, giving the room a special atmosphere.

Panels are made of several types of materials - MDF, natural wood or plastic. Last option- the most popular. Plastic is easy to clean, it is not afraid of water and sun, and it is also a bit more affordable than other materials. But plastic panels there is a minus - they are not recommended for use in residential premises. It is better to use natural materials for wall decoration, for example, MDF - pressed boards. wood chips they are much lighter than solid wood. Such material is an excellent sound insulator, and if you purchase MDF panels with special impregnation, they will not be afraid of moisture.

Wood is the most noble and at the same time expensive material for finishing any room. According to its characteristics, wood is stronger and more reliable than MDF. Wall panels made of any material are mounted to a metal crate using self-tapping screws or simply glued to the walls themselves - the mounting options depend on the level of humidity in the room. Otherwise, the installation of panels is simple and does not take much time.

This type of finish is more commonly seen on the floor, however, walls can also be finished with laminate panels. This option in its appearance looks no less chic than natural wood, but at the same time cheaper.
Advantages of laminate flooring:

• environmental friendliness and safety;
• the ability to choose any color and texture;
• easy to install;
• looks nice and presentable;
• moderate price.

It is worth considering that the laminate, although very resistant, does not tolerate moisture well, so if the humidity level in the room is high enough, this type of finish is not suitable for the hallway. Otherwise, the laminated coating will be deformed.
Using HPL panels for wall decoration is a good alternative to conventional laminate. Such a coating is resistant to moisture and can withstand temperature changes. In the production of such panels, the material is exposed to very high temperatures, as a result of which it does not delaminate during use. Some HPL panels are treated with a special fire retardant.

Finishing the hallway with 3D panels

3d panels for the hallway

The use of such material as a finish will require special care. The fact is that 3D panels made of gypsum have a special texture - wavy or reminiscent of air jets. There will be no problems if you decorate only part of the walls with such panels, but if you want to use 3D panels to finish the entire surface, you will need to monitor the alignment of the pattern.

After installation, such a coating can be easily painted in any color, depending on the chosen design of the room. Before painting, the surface must be treated with a primer, but any paint itself is suitable - based on acrylic, latex or ordinary water-based emulsion.

Wallpaper and paint

Both of these options are the most budgetary and simple. Paint is the easiest to use, but this type of finish is only suitable if the walls are perfectly aligned. The paint is very easy to care for - all dirt is easily washed off from it. It is best to choose a moisture resistant coating.

Wallpaper paint

Using ordinary paint, you can embody different interior design ideas. The easiest way to diversify walls is to paint one in one color and the rest in another, or use stencils when painting so that there are various shapes or silhouettes against a solid background.

With the use of wallpaper, there are even more options for decoration - patterns and textures can be selected for every taste and color. Can be combined in one room different types wallpaper, it is only important to choose the right finish for the tone so that the walls do not look clumsy.
Non-woven vinyl wallpapers look best, they are easy to maintain and very durable compared to other types of this finishing material.

Comparing wallpaper with paint, we can say that the first option looks much better and more aesthetically pleasing on the walls. In addition, the wallpaper is quite thick material, which allows you to hide small irregularities in the walls, while the paint will make them even more noticeable.

Tiling

tiling

Ceramic tiles are one of the oldest finishing materials for walls and floors. Tiles are most often finished in the bathroom and kitchen, but for the hallway this is also a good finishing option. The tile can be different in texture and colors, but there are common qualities for all variants of this coating:

• high strength;
• long service life;
• water resistance;
• practicality in use;
• resistance to low and high temperatures;
• affordable price.

Tiled walls will remain unchanged for decades, so you won’t have to think about repairs for a long time (only if you don’t get tired of the appearance of the finish itself). The operational characteristics of the material allow tiling rooms with any level of humidity and temperature. The tile is not afraid of street dirt, it can be easily and quickly washed off any stains.

Decorative plaster

Decorative plaster

This finishing option is able to translate into reality the most unusual ideas. With the help of decorative plaster, you can imitate the most different materials due to the wide variety of colors and textures. Marbled walls will look spectacular.

Advantages of decorative plaster:

• ease of care;
• environmental friendliness;
• high strength;
• compatibility with any style of interior.

Microcement is one of the options for decorative plaster. This material is convenient in that it can be used on any surface - concrete, wood, metal, ceramic or stone. With this type of decorative plaster, you can create different surfaces - matte, glossy, rough or smooth. Moreover, microcement has natural shades, which makes it different from other types of decorative wall coverings. If we compare it with classic decorative plasters, microcement, with the same qualities, is not only cheaper, but also easier to use.

Decorative finishing stone

Decorative rock

Of course, we are not talking about natural material - it is not only too expensive for the hallway, but also hard for the walls. For this reason, a lighter imitation of stone from artificial materials is used. Such a coating is also quite expensive, but easier to install. Stones are most often trimmed with some individual details, for example, doorways or arches. If you have ever had ideas about decorating a room like a cave or an ancient castle, stone is just the right option.
In terms of its decorative properties and texture, artificial stone looks like marble, granite, sandstone, limestone, etc. Most often, gypsum is used to produce this material. Advantages of artificial stone as a finish:

• high strength;
• ease of installation and operation;
• environmental friendliness;
• stylish appearance;
• ease of maintenance.

It is best to trim the lower parts of the walls with such a stone - this will protect the most dangerous areas from damage.

decorative frescoes

The frescoes, one might say, are a kind of window into the Mediterranean. This finish will give the room an Italian charm. A fresco is a painting (landscape or some kind of plot) made on the wall. The basis for the frescoes are non-woven or synthetic canvases and the classic version - plaster. Frescoes are often artificially aged in order to achieve a certain visual effect.

One way or another, the fresco is a sign of the delicate taste of the owners of the house. Of course, such decoration is not an option for a tiny hallway; such walls will look best in spacious halls. Regardless general style interior, you can choose a fresco that matches the colors and design.

Advantages:

• environmentally friendly materials;
• uniqueness;
• long service life;
• high quality coverage.

Of the minuses, one can note the high cost and the great complexity of the execution technique. First, it is necessary to apply a specially processed canvas to the base, which has previously been given a certain texture, and only then the drawing itself is applied. The final image is additionally covered with a layer of varnish. Without artistic skills and experience, it is impossible to make a decent fresco on your own, but you can mount finished frescoes on the wall. The image is glued to the wall with a special adhesive.

What is better to choose?

No one can answer this question except you. The fact is that absolutely everything depends on the general idea, your financial capabilities, the characteristics of the hallway. It is worth choosing a material, guided by ease of installation and maintenance, as well as durability and aesthetic parameters. Everything in the apartment should be harmonious.

On a modest budget good options finishes - paint or wallpaper. Paint is the simplest and most affordable material, even if it looks rustic on the walls, but it is easy to apply, economical and easy to clean from any dirt.

Wallpaper - too inexpensive option finishes, but there is much more room for experimentation. Colors, patterns and textures are very diverse. A hallway finished with laminate or panels is a slightly more expensive interior option.

Finishing with artificial stone or frescoes is more presentable and exclusive, but the materials themselves are expensive and rather capricious.

Tiles as a finish are simpler and cheaper, in addition, there are models that imitate natural stone and brickwork.

Laminate and MDF are a great alternative to expensive natural wood, while such walls will look just as good.

Obviously, any wall material has its pros and cons, and right choice depends on finding the right balance between beautiful appearance, price and durability.

The corridor is an important room in any apartment. This is where you and your guests enter as soon as you cross the threshold of the apartment. Therefore, when decorating it, every effort should be made to make it respectable and beautiful.

In this article we will tell you about the existing wall decorations of the corridor in the photo. We will also briefly mention the choice of floor material. In any case, this article will be useful to those who have not yet decided on the choice of facing material and are on its threshold.

What to pay attention to

So, before proceeding with the choice of one or another building and finishing material, it is extremely important to identify the specifics of a particular room. So, the corridor in the apartment is the most passable place. It is here that the greatest movement is observed in the morning and evening, sometimes at lunchtime. Moreover, the corridor in the apartment is faced with dust, dirt, water and other contaminants. Moreover, during the cold period, we all dress in outerwear and the walls of the corridor are subjected to excessive friction. considering all this, it is worth taking seriously the choice of finishing the corridor of the apartment photo.

So, if everything is marked, then the selected material for the corridor must meet at least the following requirements:

• High wear resistance.
• Practicality, there should be a fine line with attractiveness.
• The ability to easily wash the surface from any contamination.
• Eco-friendliness whenever possible.
• Repairable.

It is equally important to think in advance about the design style of the corridor in the apartment. To do this, you will need to look at ready-made designs, photos, and more on the net to see what you would like. Although, if repairs have already been made in the entire apartment, then the style should be tied. This is the easiest way.

Among other things, it is worth paying attention to the shape of the corridor in the apartment. It can also influence the choice of a specific building material. So, we offer you some original solutions:

• The corridor in the apartment has a tunnel shape. In this case, you can use broken shapes, square endings, and so on. Everything that visually reduces this distance, and not vice versa, lengthens it.
• Keep in mind that there are mostly no windows with natural light in this room, so additional artificial light sources will be installed. They can beat certain elements.
• There is usually little space in the hallway of an apartment, so there is not much room for installing luxurious furniture.

So, as you can see, when choosing a facing material for walls and floors in the corridor, it is necessary to take into account a large number of nuances. We now invite you to consider possible options finishes. Perhaps some ideas will inspire you, and you will get an original idea for its implementation with one or another material.

wall decoration

The construction market offers a huge range of facing materials for wall decoration in the corridor. Each of them is unique in its own way and requires an individual approach to its application. Here is a list of existing building materials:

• Decorative plaster.
• Brick.
• A natural stone.
• Fake diamond.
• Panels.
• Clapboard.
• PVC panels.
• Wallpaper.
• Painting.
• Tiles and more.

Of course, of all the above, the most fashionable and original solution is decorative plaster for the corridor. But its cost may scare you away. Moreover, not every home craftsman is able to independently apply it to the walls of the corridor. As a result, one cannot do without the help of a qualified specialist, and this is an additional expense.

That is why many are looking for alternative solutions as opposed to this modern trend. Especially if you have limited financial resources. We offer you for comparison a number of construction facing materials for the corridor.

Decorative rock

This is one of the most popular solutions and can rightly be attributed to the budget finish. Some home craftsmen make decorative stone with their own hands, which further reduces the cost of the entire repair. The main advantage of this material for the walls of the corridor in the apartment is that this finish perfectly imitates a large number of building materials, such as slate, sandstone, and the like. Plus, it is very easy to lay, the main thing is to properly prepare the base. After gluing, the artificial stone is painted in the desired color and treated with varnish and wax. As a result, its surface is protected from all kinds of contaminants.

flexible stone

Another original solution that has recently appeared on the domestic market. This stone is in the natural category. As a result, it is high strength, resistance to moisture and other contaminants. An excellent choice for finishing the corridor in the apartment. It can be safely combined with other materials in the corridor, for example, painting, wallpaper, decorative plaster and so on.

Wallpaper

Here it is worth highlighting their huge variety. If you turn to the market, then you will see a huge number of them. This finishing material is an ideal solution for budgetary and not only repairs in the corridor. They can be easily glued on their own without the involvement of specialists. For our part, we need to understand which existing species wallpapers are the best for your apartment.

1. Vinyl. This is the most popular wallpaper option in the domestic market. They have a PVC coating, which allows you to wash with a damp cloth and remove dirt from the walls in the apartment. They are characterized by a long service life. It is easy to work with them with your own hands. As for the cost, the price is quite affordable for this finish.
2. Cork. This is a great alternative to vinyl, as cork wallpaper is natural and environmentally friendly. Many are stopped by the choice in their favor by the fact that this material has a uniform color. If your corridor in the apartment has small dimensions, then it is better to refuse such material.
3. Liquid. If we talk about practicality, then liquid wallpaper is the leader in this component for an apartment. But to buy high-quality liquid raw materials, you will need to shell out a lot of money. However, the end result will please you. They can create all sorts of pictures right on the wall in the apartment.
4. Quartz. This is a material that has a natural basis. So, paper or interlining is the basis. The surface is covered with quartz sand. High cost, here is the main disadvantage of finishing.
5. Glass fiber. This is a natural material on which paint or any image is applied. For the price they are available to a wide range.
6. Wallpaper. This is a classic of the genre. And although photo wallpapers were a great success in the days of our ancestors, today the situation has not changed at all. Moreover, modern technologies have made it possible to improve this finish, for example, you can order the printing of any image directly on the wallpaper.

decorative paint

As mentioned at the beginning of this article, decorative painting in an apartment is one of the most expensive. And this is not surprising, especially if you look at the decorative plaster in the photo in the corridor. The results of its application are simply impressive. Moreover, this coating has excellent technical characteristics. So, the surface can be washed, it is durable, practical and beautiful. Today there is a huge variety of types of decorative plaster that can be used for the corridor in the apartment.

Panels

There is a great variety here. The panels can be based on a variety of Construction Materials. For example, the decoration of the corridor in the apartment looks original with an imitation of timber. Of course, there is no comrade for the taste and color, but there is something in it. So, panels can be made of wood, plastic, brick, concrete, have a 3D effect, and so on.

Important! Panels allow you to quickly and reliably hide absolutely any flaws in the premises in the apartment. For their installation, most importantly, Smooth surface.

Brick

This is another stylish and original solution that attracts with its uniqueness for apartments. For this, bricks are used, cut in half lengthwise. Such a finish will look bulky and massive. Therefore, an excellent solution would be for spacious corridors in the apartment. Moreover, problems may arise if you want to hang certain items on the walls of the apartment.

Stone

Natural stone is one of the luxurious solutions for wall decoration. However, if the budget is limited, you can give preference to artificial stone. But in any case, nothing will convey the structure of a natural stone like it itself. Even if you have a beautiful imitation in front of you. This is especially true for tactile sensations.

Painting

In this case, it is necessary to use durable and high-quality paints that can cope with the load imposed. Today, there are many types of paints that can even be washed with detergents. However, remember that for painting you need a perfectly smooth and even surface of the wall in the apartment. Otherwise, all the bumps will be very visible. This is a very time-consuming job and requires special skills in construction.

Combination of materials

If you liked several original finishing solutions at once, then you should consider combining them together. This will allow you to achieve a special result. For example, partially the walls can be painted or covered with wallpaper. Partially, decorative / artificial stone can be glued to the walls. Walls in the corridor finishing options can be very different. Always start from your own taste, because you can’t please everyone.

Floor finish

When it comes to flooring, there isn't much to choose from. However, the choice of facing material for the corridor floor in the apartment should also be approached responsibly. Again, it is worth considering the specifics of this room in the apartment. Here the floors are subjected to serious loads. Wet and dirty shoes, active movement, etc. Therefore, the material for the floor must be heavy-duty, beautiful and reliable.

The best option is ceramic tiles. It perfectly copes with all mechanical loads. Also, this finish is not afraid of moisture, cold and so on. Any contamination is very easy to remove from the surface of this finish. However, when choosing ceramic tiles for the floor of a corridor in an apartment, one should take into account its property - thermal conductivity. Without underfloor heating, tiles will always be cold. Therefore, it is first recommended to lay a water or electric floor system in the apartment on the floor.

Important! The presence of a warm floor in the corridor will always keep shoes clean and dry. It will be warm, especially in wet and frosty weather.

In addition to ceramic tiles, there is also a laminate option. But for the corridor in the apartment it is extremely important to choose an expensive laminate, one that is designed for serious loads. It is also worth paying attention to the lock system, it should have special protection against moisture penetration. In a word, laminate flooring in the hallway is not the best solution. Although according to its technical characteristics, the laminate perfectly copes with the resulting dirt, debris and moisture. It is easy to take care of him. But, if snow-covered boots stand on it all night and the snow melts, then there is a big risk of damage to the coating. Therefore, think and decide for yourself whether it is worth the risk.

Conclusion

So, here we have considered all the features of the choice of facing materials for finishing the corridor in the apartment. As you can see, it is really necessary to take into account a large number of nuances. The easiest way to not miss anything is to analyze the specifics of this room in the apartment. So, you will be able to determine for sure how well this or that finish is suitable for covering it on the walls or floor in the corridor.

We hope that this material was useful to you. We are confident that you will be able to weigh the pros and cons and accept the right decision. In order not to be mistaken, we suggest that you watch the prepared video material at the end of this article. This will help you consolidate all the theory provided.

There are many different ideas and techniques for finishing the corridor, its arrangement and design, using which you can competently ensure that this room brings joy and pleasure not only to the owner himself, but also to guests.

Design of the corridor as a passage room

Entering the house, a person immediately enters the corridor - a long and narrow space that connects all other rooms in the apartment. It is in its appearance that the first impression of a dwelling is often created, therefore, each owner should approach its arrangement, the design of walls and floors with special attention.

The corridor should not only be comfortable and functional, its aesthetic component is no less important. The corridor is traditionally a narrow and small room from which access to the main part of the house is opened. In new buildings, it often merges with other rooms and has a rather large width. There should not be too much furniture here.

When deciding on the design of the corridor, it is advisable to stop the choice on light colors, which should be combined with each other. So you can visually make the corridor wider.

wall decoration

Considering various options for finishing the corridor, the first thing you need to pay attention to is the shape and size of the room, the stylistic orientation. It is also necessary to decide whether the corridor will act as an independent room or complement the overall design of the house.

Before proceeding with the repair, be sure to remove old decorative coatings from the surfaces.. After that, it is necessary to examine the condition of the walls and, if necessary, level them using plaster and putty. This is especially true for those rooms that will subsequently be finished with tiles, wallpaper or decorative plaster. After you select the most suitable type of finish, you should calculate the amount of material and purchase it.

When all questions regarding the future type of corridor are resolved, you can proceed to work. Repairs are carried out in a strictly defined order: first they update the ceiling, then they move on to the walls, and at the very end they change the flooring.

There are many ideas for transforming the walls in the corridor, and some can highlight this room, making it especially original.

Among the variety of materials for wall decoration in the corridor, most often the choice falls on Wall panels, wallpaper, decorative plaster and decorative stone. In some cases, a combination of the above materials is allowed.

Wall panels

One of the modern finishing materials, which is widely used in wall decoration in the corridor. It gained great popularity due to its advantages: low cost, a wide selection of patterns and textures, simple installation technology, ease of maintenance.

If necessary, the owner can independently replace the damaged fragment. The technology for installing such panels on the walls in the corridor does not require preliminary leveling of the surface.

Depending on the shape, wall panels are usually divided into three main types.:

• rack type-setting;
• tiled;
• leafy.

Installation of panels is carried out on a wooden or metal crate. But with this method of fastening, the room loses its usable area, so it only makes sense to use it for spacious corridors.

Depending on the material of manufacture of the panel, it is customary to subdivide into:

• plastic;
• wooden;
• laminate;
• glass;
• drywall, etc.

Plastic panels differ from other finishing materials in a wide variety of patterns. There are among them options that imitate wood, stone, as well as other natural materials. Manufacturers produce them in different widths and heights, which allows buyers to choose the material that is most convenient for installation. Installation of such panels can be carried out on a frame, special glue or liquid nails, if the walls in the room are even.

MDF panels are also very popular.. This was largely facilitated by the safety and environmental friendliness of the material.

Among the advantages that these panels possess, it is worth highlighting the excellent heat and noise protection properties, ease of cutting, and the absence of difficulties with mounting on the surface. Subject to the recommendations for operation, such panels can serve for many years.

Wood panels are often seen as an alternative to plastic and MDF options. They attract consumers with environmental friendliness, ease of care and ease of installation. They will look great in any design, if necessary, they can be repainted in any color. Installation of such panels is carried out on a crate, which can be filled special material to improve the heat and sound insulation characteristics of the room.

Wallpaper and decorative plaster

Wallpapers do not lose their relevance, despite the fact that more technologically advanced finishing materials are available today. In recent years, manufacturers have been able to fill the market of finishing materials with a large number of new models. Modern wallpapers differ not only in a variety of patterns and colors, but also in the material of manufacture, which directly affects their quality and resistance to various influences. The most popular among them are:

Decorative plaster differs from other similar materials in the greatest affordability. Provides a large number of textures and effects, does not deprive the wall of the ability to "breathe", is resistant to external influences. After pasting, such walls can be painted with any paint, including latex, water-based and acrylic. Have more sophisticated technology application, but it allows you to hide small defects in the wall.

Ceiling and floor decoration

If you want to not only transform the corridor, but make it original, then you need to pay special attention to the ceiling decoration. Harmony with the walls will give the room a complete look.

It is worth recalling that it is with the repair of the ceiling surface that it is necessary to begin finishing the corridor. The first step is to decide what type of finish you will use. Considering that in this room the ceiling is not exposed to aggressive influences, the choice can be stopped on any finishing material. Along with traditional options (paint, plasterboard sheets), preference can be given to modern solutions - suspended or stretch ceilings. It all depends on the imagination and financial capabilities.

We must not forget about the lighting in the corridor. Before repair, you need to understand how the lighting points will be located after installation new design ceiling. Indeed, for a comfortable stay, lighting in the corridor is no less important than in other rooms.

With special attention it is necessary to approach the choice of flooring. It must be remembered that in the corridor the floor is subjected to maximum loads. With this in mind, it is recommended to stop the choice on the following materials:

• tile;
• laminate;
• linoleum.

Tiles can be either ceramic or synthetic. The main thing is that it should have good wear resistance, be of a sufficiently high class, have a rough surface, preventing possible slips. Additionally, you can install a warm floor. The tile goes well with many modern materials you just need to choose the right ones.

Laminate is a finishing material that can be used to decorate not only rooms, but also the corridor. But we must remember that it must be a material of a sufficiently high wear resistance class.

No less important is moisture resistance, which should be the same both on the outer surfaces and on the end edges. In order to save money, you can lay a more resistant laminate around the doors, and ordinary material on the rest of the area.

For the corridor, it is best to purchase semi-commercial linoleum, which differs from the traditional one in increased strength and service life. If possible, it is better to buy a material with an anti-slip effect and a non-uniform pattern.

Thus, for the ceiling, floor and walls in the corridor, there are countless finishing options. And each of them allows you to create an atmosphere of comfort and coziness in this room. But, adhering to the recommendations of experts, do not forget about your own preferences. A lot of good ideas can be found on the Internet. Some of them may well become Starting point to create your own original design project of the corridor.

Pets bring their owners a lot of positive emotions. Many people cannot imagine their life without a four-legged friend. However, every pet owner should take into account that our smaller brothers do not treat the luxurious designer interior of the apartment as something inviolable. Your premises are their home, respectively, they dispose of all its attributes at their discretion. Often, cats can tear up walls and furniture, and dogs can taste everything that is possible.

Owners should take care of the reliability of the methods of protecting their homes in advance. The entire apartment is in the zone of potential danger, but special attention should be paid to the hallway and corridor, where animals frolic most actively, sometimes have their own soft spot-bed and, of course, carry dirt from the street.

Who lives with you in the apartment? Miniature cat or big dog? Of course, it is impossible to say for sure what to expect from your pet, however, its size, breed and character are of great importance. For playful and active large animals, you need to choose a more practical way of finishing.

It is not advisable to resort to paper or fabric wallpaper for wall decoration, because they are practically impossible to wash and clean. Better pay attention to non-woven types - they wash well. But if your animal still grinds its claws, pulls, tears and scratches the coatings, then it is best to secure the apartment and the hall with other types of coatings.

When choosing how to decorate the walls in the corridor, if there are dogs and cats in the house, you can consider anti-vandal vinyl wallpaper. They differ from conventional ones in increased mechanical strength and wear resistance. The vinyl coating in them is pressed, they are very dense and heavy (about 400 g per 1 m). In such varieties, the dye is introduced into the material, and not applied from above. Small imperfections on anti-vandal wallpaper are almost invisible, so they will perfectly fit into the design of apartments where cats and dogs live.

The instinctive behavior of animals will not affect your apartment so much if the surfaces are coated with acrylic paint, which has several advantages. In order to prepare the walls for painting, you need to make some efforts: carefully plaster, prime and putty. Having done this work, the surface is easy to paint in any color you like. An ordinary flat wall is unlikely to be of particular interest to animals.

This is a rolled wall covering, visually similar to a fabric with a certain structure. It is made from very thin glass filaments formed by melting quartz sand. The result is one of the most durable materials available today, also used in the aircraft and automotive industries.

These coatings can be easily repainted in different shades many times. After painting, the wallpaper becomes completely uninteresting for animals: after several unsuccessful attempts to influence the wall, four-legged comrades simply lose interest in such an activity. Thanks to a special adhesive that gives extra strength, the canvas adheres tightly to the surface, which makes it much more difficult to tear or damage it than ordinary vinyl wallpaper.

Choosing the best way to protect the walls from a dog that has soiled its paws on a walk, it is better to give preference to acrylic paint. When choosing the right coating composition, it is easy to wash in case of contamination, and it is also easy to paint over the dirt. Of the options with which it is possible to decorate the walls in the corridor in order to protect them, this one is one of the most budgetary.

To help protect the walls from the clawed paws of a cat, tiles will help. The stereotype that tiles are used exclusively in the bathroom, toilet and as an “apron” over the cutting surface and stove in the kitchen is long gone. Today, there are many options for coatings that are successfully selected for the design of any room. Drawing of natural stone? Brickwork? Fancy wood pattern? Or an interesting ornament that perfectly complements plain walls? With a creative approach to the issue, even the most inconspicuous corridor will be decorated with harmonious modern tiles. It not only protects the walls from animal mischief, but also helps to avoid pollution in the hallway.

It is worth noting that only the lower part of the wall is often sheathed with panels and clapboard, leaving the upper part for painting or wallpapering. It is definitely not worth decorating partitions with cork panels in order to protect the surface. It is better to prefer models made of chipboard, MDF, PVC, artificial stone. However, some types of MDF and plastic can still be quite vulnerable if the pet is too active or has an impressive size. You need to take this into account and choose more durable and high-quality options. In order to increase the wear resistance of wall panels, it is worth gluing them with liquid nails not on the crate, but close to the wall. There are models lined with a glossy vinyl film, which creates an additional protective layer and makes them more resistant to damage. In the case of animal leprosy, replacing damaged segments will not be difficult.

Clapboard cladding can be an alternative to panels, but this option is far from suitable for any style. Today, the construction market offers a wide selection of wooden coatings from various breeds tree. They are quite strong and durable, but some damage may still be noticeable on it. If your pet is calm and obedient, feel free to choose clapboard lining.

A good addition to an ordinary wall for painting will be its volumetric texture. Decorative plaster will help solve the problem of boring walls, give the surface interesting view. You can choose any version of the relief texture you like, here are some of them:

• structural;
• Venetian;
• flock;
• "bark beetle";
• "lamb";
• "fur coat".

Decorative plaster will minimize the risk of significant surface damage. On such a wall, cat claws and dog teeth have absolutely nothing to catch on, so, most likely, the animals will not be up to it.

Choosing natural stone or brick as a wall covering is a win-win option. This material is most resistant to various kinds of damage, durable and reliable, in addition, environmentally friendly. With such a surface, the pranks of your pets will quickly come to naught.

The choice of a coating made of artificial materials that look like natural stone or brick should be approached very carefully: poor-quality raw materials are easily pressed through, scratched and peeled off. If you want to provide durability and comfort for years, it is better to consider not the most budget options.

Initially, it was customary to use laminate flooring only as a floor covering, but in modern realities, its use extends to other planes: to walls and even to the ceiling. Natural wood pattern always looks interesting and expensive, attracts the eye (especially in such an unusual design). There are some features of laminate mounting:

• you can attach the board with thin screws at the top and bottom edges right along the front panel, then close these places with skirting boards;
• fastening with self-tapping screws through the lock groove is possible;
• for walls, an installation option using liquid nails is suitable - special, for heavy structures (before gluing the surface, it is worth preparing and sanding it reverse side material).

Laminate will help you decide how to protect the walls from cats and dogs. When choosing from a variety of cladding options, don't overlook this one if you want to combine durability and style.

Whatever wall covering you choose, it is worth remembering that the zone of active damage ends at about 1 m from the floor (or depending on the size of your pet), so it is not at all necessary to finish all the walls in the hall monotonously and evenly.

Now you know how to paste over the corridor if the cat is tearing up the wallpaper, and the dog is actively playing in it. With due attention paid to the coating in the hallway, none of the guests will think about the forced choice of a certain material, and you and your beloved dog or kitten will be able to live the best moments together in a cozy apartment without problems and worries.