We make budget repairs in the bathroom: inexpensive options for finishing the room. How to cheaply finish the bathroom Walls in the bathroom economy option

27.06.2020

Organizing a budget bathroom renovation with your own hands is a doable task. The right strategy when choosing finishing materials and clear view on the progress of work will allow even with a modest budget to transform the bathroom without sacrificing quality.

Organization of the process

Good planning is the first step towards a successful completion. Most of the work in the bathroom with a budget repair can be done by hand. Removing old coatings, dismantling plumbing or painting can be done even by a novice master.

But if experience in wall tiling is not enough, you should think about inviting specialists to individual areas of bathroom renovation. Do not overestimate your strengths and capabilities. Sometimes reworking your own mistakes will cost more than inviting the master initially.

When the bathroom renovation work is distributed, they move on to the choice of finishing materials. It is better to refuse well-known imported brands. A significant part of the cost is a fee for the brand, which, with a budget repair option, looks inappropriate. The cheapness of Chinese goods is also not the best option.

Advice! Stop at a domestic manufacturer or an assortment from Poland, Slovenia and Bulgaria.

This applies to both finishing materials for the bathroom and plumbing. The combination of reasonable cost and good quality – distinguishing feature offered products.

An important condition for a qualitative result when carrying out budget repairs with your own hands is compliance with the technological process. If any stage of the work is in doubt, listen to the recommendations of experts, improvisation is inappropriate.

Redevelopment of the bathroom automatically increases the repair estimate at times, so there is no need to talk about the budget option. Leave your ideas for moving walls or plumbing to another place until better times, when there will be no financial constraints.

Volume preparatory work removal of the old cladding depends on the choice of new materials. Sometimes this step can be avoided. Mandatory dismantling of plumbing is required if it is planned to replace it.

Wall decoration

An economical bathroom renovation includes several options for wall decoration:

staining;
installation of PVC panels;
wallpapering, including self-adhesive film;
facing with tiles from the budget segment.

Each method has undoubted advantages and some negative points.

Coloring

Wall covering with paint is the leader among economical finishing options due to its ease of execution and low cost. A competent approach when choosing paint and high-quality wall preparation is the beginning of the path to success.

Advice! It is not recommended to completely cover the walls of the room with paint.

The project is characterized by greater efficiency, where the areas near the sink and bathtub are lined with inexpensive tiles or moisture-resistant PVC panels.

Moisture resistance and antibacterial properties are prerequisites when buying paint, otherwise it will not be possible to avoid the development of fungus and peeling of the coating in the bathroom. High performance characteristics against the background of budgetary cost are inherent in paints:

latex;
acrylic;
silicone.

The absence of a pungent odor is a definite plus of water-based formulations, and silicone paints perfectly perform the function of a hydrobarrier. It is better to refuse the use of oil mixtures. After a short time after the repair, the walls of the bathroom will be covered with cracks.

When renovating a bathroom economically, keep in mind that paints with an attractive glossy effect accentuate any irregularities in the walls and make any imperfections more visible. Therefore, careful alignment of the walls is necessary. The advantage of gloss is the ability to visually enlarge the space of a small bathroom.

Often, during renovations, it is necessary to remove the old paint coating from the walls of the bathroom. You can do this in several ways:

use a drill with a special grinding nozzle;
purchase a liquid for removing paint; in the process, you will also need a spatula and a scraper;
use thermal methods, when the old coating is heated with a building hair dryer or burner, and the swollen paint is scraped off with a spatula.

Naturally, at the end of the removal process and before the start of staining, the whole range of measures is carried out: sealing cracks, eliminating protrusions, priming.

In the photo, a bathroom with a budget renovation with your own hands:

PVC panels

You can repair the walls of the bathroom with PVC panels. At a cost, this will cost a little more than buying paint, but the method has two distinct advantages:

The appearance of the bathroom after a budget renovation using PVC panels, in terms of design, is incomparably better.
No extensive preparation of the wall surface is required.

The process of mounting panels does not contain complex steps and is available for do-it-yourself. After calculating the need for the material, the formation of the crate is carried out. For these purposes, plastic profiles with clips are used. Suitable for economy bathroom renovation wooden slats. Pre-impregnation of the material with antiseptics will protect the slats from high moisture.

Wallpapering

It has the right to exist and the option of repairing a bathroom using wallpaper, the main thing is to choose moisture-resistant products. The work is being carried out at a fast pace, the removal of the old coating is not required in all cases. There are 3 main types of wallpaper designed for use in the bathroom:

Vinyl with non-woven base. The price is quite high, the repair will require the purchase of special glue, which is not always advisable in an economy project. But high performance is the basis of popularity among consumers.
Washable. Compared to vinyl copies, they are less practical, the cost of the product is correspondingly lower.
Remark! When repairing with your own hands, it is advisable to avoid pasting areas of the bathroom that may be exposed to water.
Self-adhesive film. Incredibly practical material, which is initially equipped with an adhesive layer. A wide range of design solutions able to create a wonderful transformation with a bathroom after renovation.

High quality and attractive appearance self-adhesives accompany 3 negative points:

The rather high cost of the product, which may not fit into the budget repair estimate.
Bathroom walls require careful preparation, as any flaw under self-adhesive wallpaper will be extremely noticeable.
Pretty complicated application process. The painstaking process takes much longer than standard pasting.

tiling

Budget repairs also involve the use of tiles in wall cladding. The main thing is to choose an inexpensive product with decent quality. Solution advantages:

the material is resistant to temperature extremes;
not afraid of high humidity, withstands prolonged contact with water;
washes well;
resistant to mechanical damage.

The following negative points can become an obstacle to using the bathroom during budget repairs:

additionally, you need to purchase a mixture for fixing to the wall and a grout;
walls with old paint need to be prepared, the coating must be removed;
the process requires a certain amount of experience and not everyone can do it on their own, inviting a master will increase the repair estimate;
It takes more time for lining than when pasting wallpaper or painting.

The best option when renovating a bathroom with a budget project is to combine cladding. The area near the bath and sink is tiled, and for those less exposed to water, a simpler and more economical method of coating is chosen.

Ceiling finish

The amount of work on the budget finishing of the ceiling depends on its initial state. It is enough to cover a flat surface water-based paint or whiten. A simple and quick process can be done by hand. It is recommended to remove a significant curvature or mask the communications of the bathroom with a suspended structure. Rack elements or PVC panels are suitable as a material.

The main advantages of the choice:

affordable price segment;
simple lining procedure;
does not require perfect surface preparation of the bathroom ceiling;
successfully mask wires and pipes;
Possibility of installation of built-in lamps.

The result of the budget repair is shown in the photo:

floor covering

The finishing option depends on the renovation estimate and the condition of the old bathroom flooring. Sometimes just refreshing the look of a tile is enough. To do this, you will need to remove the grout and pick up a new one that matches the color of the tile.

It is quite simple and cheap to lay linoleum, but this measure will be temporary. The increased level of humidity in the bathroom provokes the development of mold on the linoleum.

Comment! To avoid negative consequences during budget repairs, the purchase of PVC-based linoleum or without a base at all will allow.

Greater practicality in the repair of the bathroom has a tile, even if it is a budget cost. Facing is carried out without dismantling the old tiles. The cost of labor and time will require a screed. To repair the bathroom floor, choose a tile with a rough texture to avoid slipping and not cause injury.

When extremely limited budget the most economical option would be to purchase a large rubber mat that will cover the free space of the bathroom floor as much as possible. It can be changed much more often than any stationary coating, and a fresh look of the interior at minimal cost will be provided.

The nuances of choosing plumbing

Replacement of plumbing in the case of budget repairs is not always carried out. Sometimes they stop at the option of restoring the bath. There are several ways to update:

The inner surface is treated with a two-component polyester enamel. Most budget friendly.
Restoration with liquid acrylic is characterized by greater durability and cost.
Sometimes both methods are unacceptable due to the deplorable state of the bath. An acrylic tab will save the situation, the fixation of which is carried out with a sealant.

Each of the methods still implies financial costs, although they will be incomparably lower than the purchase of a new bowl.

If a budget repair involves the purchase of new plumbing in the bathroom, consider the following options:

acrylic container. Located at the bottom of the price segment. Easy installation and easy maintenance are the key advantages of the product for the bathroom. A short service life and instability before mechanical damage are the main negative features.
Cast iron is characterized by greater practicality. The cost is higher than acrylic counterparts.
Steel bathtubs in their characteristics are between acrylic and cast iron products.
If the presence in the bathroom of the bath itself is not important, you can think about installing a shower cabin. But the repair will already go beyond the budget.

When replacing sinks in the bathroom, choose between hook-on or stem-mounted equipment. The first option is more budgetary, the second has more aesthetics, as it successfully masks communications. The nuances of choosing plumbing and the preference of a domestic manufacturer were discussed in the first section.

Conclusion

To embellish the interior of the bathroom after a budget repair, small trifles can. original curtain, decorative stickers and new accessories will enliven the design of the room. Communications are not left open, they will spoil the result of even the most expensive repairs bathroom. A budget way to quickly hide the functional elements of the decor is to form a plastic box. It will take a little time and costs, but the result will be obvious.

No wonder the people there is a proverb "Cheap fish - a bad ear." You and I need to find a middle ground so that the renovation in the bathroom turns out to be excellent, and we had to pay for it at a minimum. This article will consider budgetary and at the same time good options renovation of a small bathroom.

Before proceeding with the decoration of the walls and floor, we need to find out what condition the bathroom is in. Do walls need to be leveled? Leave the floor as it is, or do you want to tweak it a bit? What is the condition of the ceiling? After evaluating the premises, we draw up a specific work plan and begin its phased implementation.

Economical option for wall decoration in the bathroom

We do not forget that we are very limited in the area of the room. This is not a royal mansion, but a compact room that was built in the era of Nikita Khrushchev or even earlier. This means that for wall decoration we will choose methods that “steal” the already modest space in the room to a minimum.

Tip 1. It is better to cover the walls in the bathroom with plaster than to sheathe them with some kind of drywall.
Tip 2. What to choose: tiles or wall panels? Of course, the first option, since the panels take away a lot of free space, which is already lacking.

Of course, each case is individual. Well, if you swung at overhaul and want a nice bathroom, you can sacrifice free space.

To begin with, you and I need to clean the walls from old finish. If this old tiles, the easiest way is to knock it down with a puncher, although you can get by with the old-fashioned way, picking up a chisel. The paint is well cleaned with a special brush having a metal pile.

After the trim has been removed, we boldly proceed to replace all communications. We will not dwell on this aspect in detail. We only note that after it you start leveling the walls (if necessary). Of course, there is a more economical option - to sheathe the walls of the bathroom with some kind of moisture-resistant plasterboard. Alternatively, you can try cement boards. Just do not forget to treat the wall with a good antifungal agent.

Wall painting

This finishing method is the least expensive. In principle, everything is simple here - they chose the paint, applied it to the walls, waited for a while. Even if the paint is not ordinary, but textured, it will still turn out inexpensively. Wall tiling or paneling is much more expensive.

Perhaps the only drawback of painting the walls in the bathroom is the final result. He is not even an amateur, he is a rare gourmet. By the way, if you decide to paint the walls, you will need to align them very well, since any curvature will be very noticeable.

Summarize. Wall painting is the best budget way bathroom renovation. It can be recommended to people who operate on a limited budget or are fans of minimalism.

Wall paneling

Wall panels are sometimes called plastic lining. This name is quite understandable. Plastic panels for wall decoration will be offered to you in any, even a small hardware store. The economical option is white, the more expensive panels are laminated on the outside. Their cost is not too different from natural wood.

The plating process is as follows. The panels are mounted on a frame, which is a wooden beam. Before that, it is treated with all sorts of means: antifungal, water-repellent, bactericidal. This helps prevent rotting. The frame is attached to the walls with dowels.

Wall panels are glued with the help of “liquid nails”, they are easily connected to each other in a lock.

By the way, under the plastic you can hide a couple of massive boards. It is very convenient to screw in the fasteners of numerous shelves and cabinets that you will hang in the bathroom.

To sum up, paneling bathroom walls will cost you a bit more. Another drawback is that it takes up free space in the room. However, this material looks much better than ordinary painting.

Wall tiling

This method of finishing is considered the most practical. Here is a little step by step guide:

First, markings are applied to the wall to determine the lines vertically and horizontally. Required tools: plumb line, level of sufficient length.
On the flat wall tile adhesive is applied. To do this, you can use a spatula or a special grater.
Grooves will need to be formed on the adhesive composition. They must be the same depth.
The tile is applied to the adhesive layer, pressed by hand as tightly as possible. In this way, 3-4 tiles can be laid. After that, it is better to pick up the level and once again check how correctly and evenly the material was laid. Mistakes made on early stage styling, much easier to fix than trying to do it at the end of the repair.
The final stage of finishing will be grouting the joints between the tiles. To do this, you need to purchase at a hardware store special composition.

The cheapest option for finishing the floor in the bathroom

If you do floor repairs from the very beginning, you will need to remove old material. The ancient screed and trim are removed with a perforator. Waterproofing materials are laid on top of the cleaned base. A new screed is poured on top.

The most economical and simple coating option is linoleum. Today, this material is relatively inexpensive and practical. Moisture is not afraid, it is easily replaced in case of damage. In addition, if linoleum was laid in the kitchen or in the hall, you probably still have a couple of squares left. You can safely take it and put it in the bathroom.

An alternative estimate for repairs in the bathroom with the involvement of a team of craftsmen

Of course, ideally, it is best to buy a waterproof laminate. His modern options are not afraid of moisture and do not swell.

As in the case of the walls, the classic here was and remains ceramic tile. But here, too, you can save money. Just don't buy oversized tiles - you end up with a lot of unnecessary waste.

The cost of the cheapest bathroom renovation - estimate

Withdrawal old plaster– 500-600 rubles
Plastering, wall leveling (from 450 rubles per sq. meter)
Laying tiles - about 400-500 rubles per square meter.
Screed on the floor - the same.

Prices do not include the cost of the materials themselves. According to the most conservative estimates, renovating a bathroom from scratch will cost you 150k (~$3500-$4000) if everything is done from scratch, including replacing the door and wiring. It's great if a person has even hands and at least part of the work he can do on his own. Then the repair really turns out to be economical, really cheap.

Video: economical / budget bathroom renovation

The video briefly and clearly indicates the points where you can save a lot when renovating a bathroom.

In a crisis, you especially want to save on repairs, but the requests remain the same: beautiful, original, elegant. Like any other renovation, the decoration of the walls and floor in the bathroom has its own nuances. Consider them at the planning stage - and you can save more than one thousand rubles, and all work will be completed on time.

The question of how to finish a bathroom cheaply worries many people in our country. Average salaries do not allow you to make expensive repairs in the apartment and force you to resort to finding a budget option. Some of them for some reason believe that their dream cannot be translated into reality, but in reality this is not so. You can achieve aesthetics, comfort, durability and safety of the planned repair, using even relatively inexpensive materials. How to do it?

Everyone knows the old saying that if you want to do something well, do it yourself. Before renovating a bathroom, many people want the whole event to be inexpensive, while at the same time wanting quality and a beautiful appearance. However, do quality repair not everyone can independently because of the lack of the right tool, free time or experience. In this article, we will look at how to inexpensively decorate a bathroom, what materials to use and learn a few useful tips from experts. Before you start planning inexpensive repair bathroom and toilet, we need to clearly understand what end results we want to achieve in the end. The purpose of a repair is usually:

creating a beautiful interior;

safe operation of plumbing and furniture;

creating comfort and increasing functionality;

prevention of mold and fungal bacteria;

the longest possible service life of the materials used.

Economical repairs in the bathroom can be done using inexpensive materials, while observing all of the above points, if you plan everything correctly and choose the right material.

How to choose budget building materials

Today, the industry produces building materials of various price categories, designed for consumers of various income levels. These can be economy, standard and elite class goods. There are also very cheap materials on sale, but their advantage is only in a low price. The quality and appearance of such products do not stand up to criticism. Many works can be done independently, without involving specialists. For example, filing the ceiling with plastic clapboard does not require any special skills. Installing plumbing is also not difficult. Toilet, bathtub, washbasin - all this can be mounted independently. It is only important not to rush, carefully study the range, calculate all the stages of the work performed, then a successful result will be ensured.

As for building materials, it is more expedient to choose goods of an economy class and a standard price segment. Both of these types of materials practically do not differ in quality. The same manufacturer may produce similar products under different brand names. The first will be considered a standard class product, and the second - an economical option, and they will differ only in cost. World standards provide for certain quality criteria, for example, the density of building mixtures for solidification must not be below a certain threshold. For economical materials, this indicator will be closer to the lower value. This statement is true in relation to consumables. As for finishing materials, plumbing fixtures and other things, the low price is not at all the same as poor quality. It is only necessary to take into account the mode of loads to which the product will be subjected. For example, floor tiles should be stronger than wall tiles. With proper selection and installation, bathroom tiles can last more than fifteen years. If you have decided to carry out a budget renovation of the bathroom, you should not purchase building materials of elite classes. Their quality is not higher than that of budget products, and they benefit only due to their aesthetics. It should be understood that expensive is not always high quality, and vice versa. The high price may be due to, say, the possibility of application in special situations, while your conditions do not require such dedication. The significant remoteness of the store from the production facilities of the producing company can increase the cost. Sometimes you have to overpay for a well-promoted brand. One should not exclude the difference in living standards in different countries- if a product is produced in a state with high average incomes of the population and high salaries for all employees, then residents of all other countries are forced to dump themselves on this sky-high salary if they want to buy specific products. In general, to finish the bathroom cheaply, you should approach the task wisely.

Wall finishing materials

1. Usually under good repair bathroom most imply tiled finish. Pros: Aesthetics and durability. A variety of textures and shades gives almost endless scope for design solutions. In addition, the tile is not afraid of almost any external influences and can serve almost indefinitely. Minuses: This material is the most expensive. And not only because of the cost of the tile itself, but also due to the complexity of the preparatory work. The walls will have to be properly cleaned and leveled. In addition, the laying of tiles itself is an expensive and time-consuming process, requiring special skills.

2. Another option: coating with moisture-resistant paint or a special self-adhesive film. Pros: Profitability. Minuses: Even more thorough cleaning and leveling of the walls will be required, as the slightest irregularities will catch the eye. But even with the most scrupulous approach, the appearance of such a coating will be very far from perfect. Yes, and these materials will not last long. 3. Inexpensive and very practical option - PVC panels. Pros: The choice is huge, you can choose a design for every taste. You can mount them on the walls on "liquid nails" or a special crate frame. In the first case, again, you will need to level the walls, and it will not be easy to replace the panels if necessary. But the second option does not require any special preparation. Plastic mounting strips are attached to the walls, and on them - with the help of special clips - the panels themselves. Even a non-professional can easily and quickly cope with this task. PVC panels are not afraid of constant humidity and are easy to clean. Minuses: They can't handle serious mechanical damage. The cheapest can take a long time to publish bad smell, and over time - turn yellow, so it's better to choose not the most "penny".

Dismantling of the old cladding

Do not forget to take out all the furniture from the bathroom, remove the mirrors, seal the faucets with masking tape, and cover the plumbing with film or newspapers, because preparing the walls for painting is the dirtiest and most time-consuming step. The first step in a bathroom renovation is to remove the old wall and floor cladding. It is done with a hammer and chisel. Thus, old tiles and plaster are removed, preparing the walls for renovation. It is very important to purchase a special putty designed specifically for the walls and ceiling of the bathroom. This putty contains a special disinfectant composition that prevents the appearance of fungus due to high humidity. In order for the putty to be convenient to work with, it must be fresh and of high quality. After the walls are leveled and dried, decorative plastic panels, mosaics or tiles can be used. The ceiling is carefully leveled for subsequent painting. It's not scary if a little putty remains, it can be stored for several months in a closed container. You should not apply new layers of paint over the old peeling, nothing good will come of it. If you have a drill in your arsenal, get a couple of sanding attachments for it and clean off the old paintwork from the walls. Remember safety precautions. Use paint strippers, a scraper, and a spatula. The method is effective, but it is better to work in a respirator and gloves made of thick rubber.

You can remove the paint by thermal methods, for example, using a burner or a building hair dryer. Heat the wall section and scrape off the peeled coating with a narrow spatula. When all the old paint is removed from the walls, it is necessary to repair cracks and potholes, knock down the ledges.

DIY wall painting

Wall painting is considered one of the easiest and least expensive ways to finish. It is important to choose the right paint and prepare the surface of the walls. Bathroom paint should have antibacterial properties and be moisture resistant. Otherwise, the appearance of fungus and peeling of the coating cannot be avoided. Due to their low cost and excellent performance characteristics, latex, silicone, acrylic paints. At the same time, water-based mixtures do not have an unpleasant pungent odor, and silicone paints can act as a hydrobarrier. Traditional oil paints deprived of such dignity, and also quickly covered with cracks, so it is better to immediately refuse this option. When choosing shades, remember that small bathrooms are inappropriate to be painted in dark tones, since visually this will further reduce the space. Do not overdo it with the number of bright spots or complex patterns and their number so that the interior does not look vulgar. Soft pastel colors will visually expand the room and fill it with light.

Please note that paints can be matte, glossy and semi-gloss. Of this variety, it is matte enamels that hide small defects on the walls best of all, while drops and streaks are clearly visible on glossy surfaces. However, if you can't make a choice, consider combining glossy and matte finishes. This technique will make the bathroom modern and stylish without significant costs.

Wall tiling

When discussing how to cheaply renovate a bathroom, with a budget renovation, you probably will not consider expensive Italian high-strength tiles with a non-slip coating and the ideal geometry of each product. Here it is also important to take into account the policy of manufacturers, which is similar to the situation with the glue described above. Considering cheap repair bathroom, we do not take into account elite tiles made from special grades of clay with all kinds of additives and additives, but look at budget or middle-class products. In the vast majority of cases, the tile of the middle or low price category does not differ in any way in its composition. Inexpensive bathroom decoration from cheap tiles differs only in the appearance of the glaze. Of course, products of the middle category have a wider range of shades and a variety of texture solutions. In this case, when repairing an economy class bathroom, you should not chase after a chic appearance, you can get by with more restrained solutions, but beat them very worthily.

To work with this material, you also need a special tool, certain theoretical knowledge and, of course, practical experience. To make repairs in the bathroom yourself using tiles, without having the necessary knowledge and tools, of course, will not work.

Decorative plastic panels

When renovating a bathroom, the largest costs usually go to the purchase of tiles and work on wall and floor cladding. As an alternative to ceramic tiles, decorative plastic panels can be used. This is a great way to economically update the bathroom and get a very presentable interior. Calculate the number of panels needed, make a margin of 5-10%. If you have little experience, and the bathroom has a lot of engineering communications, to close which you need to cut the panels, then take a margin of 10%. At the same time, estimate the number of starting profiles, external and internal corners. They are sold in a standard dyne, they cost a penny, there is no need to save. The panels are attached to a special crate, which is drilled to the walls. Due to the ease of processing, the panels do not cause much trouble home master, and their installation rarely takes more than a day or two. We fix the elements in the same plane: 1. Check the condition of the wall with a plumb line, pay special attention to the attachment points plastic profiles or rack. 2. Fix the two extreme elements under the level, re-check their position. If there are large recesses at the place where the profiles are attached, then use linings made of various materials. The dowels must attract the profile over the entire plane; there cannot be a gap between it and the wall at the attachment point. 3. Pull the ropes between them, two are enough at the ends of the profiles or rails. 4. Install all other profiles under the rope, use it to control the position of the rails. Then, along the perimeter of the room, a decorative plinth is attached to the floor and ceiling, which can mask the possible flaws in the cut edges of the panels.

Wall decoration with wallpaper

For wallpapering, you can use only waterproof types. This method of finishing has a number of undeniable advantages. Low cost makes it possible to have an exclusive and reliable coverage with small material losses. High technology. Among all the possible ways to finish the walls in the bathroom, wallpapering is the easiest. The work is carried out within a few hours, the room can be used for its intended purpose the very next day. It is possible to frequently change the design of the premises. In some cases, re-pasting can be performed without removing the old one - the repair time is significantly reduced, and the amount of construction debris is minimized. The disadvantage is that in terms of physical strength, wallpaper is inferior to traditional materials. But, if you behave carefully and avoid mechanical damage, then the period is calculated for many years. In addition, defects on the wallpaper are easily eliminated, after pasting there will always be a small amount of materials left. Don't throw it away, keep it "just in case" for repairs. Wallpaper for pasting the bathroom must be moisture resistant. During the purchase, pay attention to physical strength, and it depends on the material of manufacture. Non-woven vinyl - the most modern, differ high rates mechanical strength, can have a long direct contact with water. Available in a wide range color solutions, can be plain or with various patterns and ornaments, with a structured or smooth front surface. Disadvantages - relatively high price, the need to use special glue.

Washable - a cheaper segment, according to performance characteristics inferior to vinyl. It is recommended to use on wall areas that are not exposed to water splashes. Self-adhesive - made of a special polymer film, have a huge number of design solutions. Disadvantages - relatively high price and complexity of finishing. In addition, they can only be used on perfectly flat surfaces.

How to decorate the ceiling

The simplest and cheap way- plastering and painting. However, if there are significant irregularities on the ceiling, it will be almost impossible to achieve a good result. Over time, the paint may darken, or even peel off, even with a small leak, the ceiling will be hopelessly damaged. Installing built-in lighting will not work - only pendant lights will be available to you. A more practical option is the same PVC panels or suspended rack ceiling. The latter are made from steel, aluminum or plastic rails and are often sold as ready-made kits - along with the frame and mounts. Such ceilings are inexpensive, durable, easy to install and operate and are suitable for almost any bathroom.

becoming more and more popular and stretch ceiling. To install them, you will have to call professionals with special equipment, but as a result you will get not only a perfectly smooth ceiling, but also reliable protection from leaks: stretch ceilings withstand from 70 to 120 liters of water per square meter. True, this option is not suitable for those who have a geyser installed in the bathroom.

How to cover the floor?

Most cheap option- linoleum. It is not difficult to lay it, but in no case should moisture get under the coating, otherwise mold will begin to multiply there, an unpleasant smell will appear. Therefore, linoleum must be glued to the floor, and the seams must be treated with silicone sealant. With proper installation, this material has one drawback - a very conditional "beauty". A universal option is ceramic tile or porcelain stoneware. They can be chosen for every taste and budget. There are practically no shortcomings of this material, except, perhaps, ubiquitous distribution.

Fans of more original solutions choose moisture-resistant laminate or self-leveling floors. However, the first option has too low moisture resistance and quickly fails, and the second is too expensive and difficult to install.

Bathroom lighting

Pay attention to lighting options. Properly thought-out lighting, installed in the right places, can turn the most ordinary-looking room into a masterpiece of design art. Economical bathroom renovation does not involve installation concealed wiring in the walls or LED lighting. But you can install wall lights so that they visually narrow or expand the room. Budget decoration of the bathroom provides for suspended ceilings made of plastic panels, in which spotlights can be installed, they will highlight advantageous places, divide the room into functional zones and hide unnecessary structural or design flaws.

Plumbing in the bathroom

It is important to remember one simple rule. Plumbing and its important components are not the things you can save on. If there are problem areas, leaks or other temporary defects in the water supply system, then they must be eliminated. Also, low-budget repairs in the bathroom fully allow for the complete replacement of siphons and faucets. An old cast iron or steel bathroom can be insulated with mounting foam and the enamelled coating can be renewed. If there are cracks or chips in the washbasin, it is better to replace it with a new, inexpensive sample. The cheapest bathroom renovation can be done without even changing the sink or toilet with old cracks. For these purposes, there are many modern materials that can repair cracks, renew the coating, or in some cases simply clean it of old plaque.

Before you cheaply renovate a bathroom, do not forget about the market rows, where you can find many used products in excellent condition, while at prices significantly lower than market prices. They enter the market from construction organizations who, while doing an economy class bathroom renovation at other facilities, simply dismantle the old plumbing and put it on the market for sale. There, worn parts such as gaskets in mixers and valves are replaced, and then sold at significantly reduced prices.

Anton Tsugunov

Reading time: 5 minutes

A bathroom is a room that is updated infrequently. Usually cosmetic finishing is carried out here. And only with significant damage to communications or coatings, they radically change its appearance. With a lack of funds for expensive materials and a qualified team of workers, you can get by with low costs by choosing a budget way to renovate a bathroom. Some designers are specifically engaged in the creation of inexpensive projects for the arrangement and decoration of bathrooms. The choice of the optimal solution for your bathroom depends on the goals pursued by the owner of the apartment. Most people want to make repairs with high quality and for a long time in accordance with fashion trends, but use inexpensive building materials. This is a completely justified desire. Therefore, the question arises of how and from what to carry out a budget bathroom renovation.

How time saves on repairs

Many of us do not think about such things:

Repairs made on time can save you a lot of money.
the choice of the right materials helps to increase the operational life of plumbing, pipes and coatings;
quality work creates temporary advantages in the use of the bathroom space.

Bathroom - a room in which water and sewer communications are concentrated. They are the first to fail. In the process of active operation, the coating on the bathtub, toilet bowl, and sink deteriorates. They change color. They form chips and cracks. All this makes the owners think about replacing the main objects of this room. However, we do this when patching holes is already impossible. And then you have to spend significant amounts on materials and the work of specialists.

Undoubtedly, it is better to solve the problem with an unsightly interior in time, using durable materials and enjoy the excellent condition of your bathroom. Products for finishing bathrooms of high quality are very expensive. Thinking about savings, consumers often buy products, formulations and coatings from a range of "second-rate" products that quickly lose their properties.

Going to do budget repairs on long time, you should think about the service life of the main materials and try to choose the most optimal options.

Where to begin

To understand how much money you have to invest in a bathroom renovation, you need to find out all the ins and outs of it. To do this, remove all old coatings, conduct an audit of water and sewer pipes, and examine the state of plumbing.

If they need to be completely restored, materials with a long service life are chosen from among modern high-strength compounds. In most apartments, the bathroom is a small room, so not so many materials are needed. It is not worth saving on plaster and putty. They provide safety and durability. decorative coatings, which can be purchased at a budget price.

A freshly refurbished bathroom is usually fitted with new plumbing. Here you can think about buying a bathtub, toilet and sink, or updating old ones with special liquid formulations. This will require the help of a specialist who will quickly restore used plumbing.

Surface preparation

After removing the old coating, all the flaws in the walls, ceiling and floor are found. First anew , and on the lower surface . For these works, it is advisable to use a cement mortar. It is not as expensive as modern building mixtures with special components. In addition, good quality gray plaster is a solid base for cladding.

cosmetic finish

for a budget option decorative finishes bathroom use paints made on the basis of latex or acrylic. They are moisture resistant and good operational properties. Of course, all surfaces in the bathroom are best, but this is an expensive solution. The tile can be applied partially: make a half-meter border around the bathtub and sink from white squares, and paint the rest of the walls and ceiling in the color you like;

a good option for the ceiling is a stretch fabric made of synthetic material. It is inexpensive, since its area is small and the amount of work for installers is insignificant. Serves for quite a long time. When using it, you can save on the restoration of the base. The canvas will hide all visible defects;

an economical solution for finishing walls and ceilings. But not those that are attached to the crate: they eat up part of the space and require additional costs for related parts. It is necessary to use canvases that are glued to a special composition directly to the surface. However, for this it is important to align them as accurately as possible;

the floor requires special attention, as it is most exploited. It is not worth saving on tiles here. it best coverage for the lower base for all indicators. But, based on the overall dimensions of most bathrooms, you won't need much. In addition, matte embossed products, which are most suitable for bathrooms, are slightly cheaper than glossy and smooth ones.

USEFUL INFORMATION: How to paint the ceiling with water-based paint correctly and without streaks

Plumbing

Now a lot of items for hygiene procedures are being sold, differing in color, shape, size and materials from which they are made. Naturally, they differ in price. If there is no need for a daily bath, you should think about installing a shower cabin. It will save space and money, as it has a compact size and is cheaper.

Can be done on a limited budget simple models sinks and toilets, if in an apartment

How to save on materials without losing quality?

It should be understood that expensive is not always high quality, and vice versa. The high price may be due to, say, the possibility of application in special situations, while your conditions do not require such dedication. The significant remoteness of the store from the production facilities of the producing company can increase the cost. Sometimes you have to overpay for a well-promoted brand. The difference in living standards in different countries should not be ruled out - if a product is produced in a state with high average incomes of the population and high salaries for all employees, then residents of all other countries are forced to dump themselves on this sky-high salary if they want to buy specific products. In general, to finish the bathroom cheaply, you should approach the task wisely.

High price for Decoration Materials does not always speak about their quality, so if there is no desire to overpay, you need to choose wisely

Economic glue

Let's start with a simple one - with tiles, or rather, with glue for it. Tile is one of the main materials for finishing walls and floors in the bathroom, and if it is often not worth saving on the tile itself, then glue is often overpaid. Consumers often prefer the famous Ceresit glue, refusing the cheaper Moment, without even suspecting that both trade marks belong to the same company. Of course, the two options differ from each other in the range of hardness, but for ordinary home repairs, as a rule, there is no difference. If for the walls there is still some point in acquiring more expensive expendable materials, then the tiles will not fall off the floor even with the Moment, unless you arrange a dance floor in the bathroom.

Wall decoration

At first glance, it is obvious that the most expensive tile options may look more prestigious, but those who want to save money are more often interested in another question - is there a difference in strength and durability? It should be noted that usually it is still not there - you can trim the walls with cheap tiles for decades to come.

The difference in price is usually due to the attitude to appearance - if expensive models are a real masterpiece, then budget options often seem to be made somehow, but most often it is just a visual deception.

The manufacturer can also save on non-slip coating, but if the finish is chosen for the walls, then this is not too important. Another thing is that laying tiles usually requires the involvement of professionals, so, in any case, this is not the cheapest option.

You can significantly save money by getting approximately the same result if you finish the bathroom walls with plastic panels. In terms of a variety of colors, they are not inferior to tiles, but they are much cheaper and much easier to install. Unlike tiles, damaged fragments are much easier to replace, and communications can be hidden under the panels. The installation of panels does not require leveling the wall, however, due to the additional fastening profiles, the area of \u200b\u200bthe bathroom may be slightly reduced.

Plastic panels - an economical option for finishing the bathroom

Of course, the most budgetary repair option is painting the walls. Even the most expensive paint will cost the owner less than the same plastic panels, especially since even a child can do the job, because the only thing that is really needed for this is accuracy. However, this option is very limited in application - if the walls are crooked, then it will have to be abandoned. Of course, the wall can be leveled, but it is not easy to bring it to the ideal on your own, and the call of a specialist forces you to delete this design method from the list of inexpensive ones.

Floor decoration

For floor ideal option tile is also - although it is expensive, it is still optimal in terms of practicality and durability.

The most practical option for bathroom flooring is tile, the cost of which varies over a wide range.

Linoleum is usually used in classic competitors, however, it should be borne in mind that an attempt to purchase a cheaper version of it is fraught with the rapid destruction of the repair - the material does not perceive constant moisture well.

Actually, the most budgetary solution to updating the flooring in the bathroom is simply to lay a new rug, if possible, picking it up to match the walls and the rest of the finish. At the same time, in order to prevent the appearance of mold, the rug should be regularly lifted and the floor under it should be wiped.

Ceiling and lighting

Repairing the ceiling surface in the bathroom with a limited budget involves the use of plastic panels that allow spotlights to be built into the ceiling.

However, lighting fixtures can also be left on the wall, the main thing is to place them correctly.

A competent approach to the layout of the premises, as well as cleanliness and order will make it visually attractive and worthy of dear guests.

Plumbing

It is undesirable to save on plumbing and pipes, because any accident will force the owner to start repairing the bathroom from scratch. The quality should be maximum, but sometimes it makes sense not to buy new plumbing, but to restore the old one. If the bath has not lost its integrity, but has problems with the enamel coating, then it is better to renew it - modern materials allow for different kind restoration of enamel, but it costs much less than buying a new bathroom bowl.

The option of buying equipment that was already in use on the market is not excluded - construction companies that carry out regular repairs in public institutions (for example, hotels) can rent out removed plumbing for resale. At the same time, before implementation, it usually undergoes restoration to a normal functional level and costs much less.

Latest bathroom details

When the interior is almost ready, it remains to add the finishing touches that will make the room ready for its intended use - we are talking about a curtain, shelves and hangers.

The curtain can be found at very low prices if it is made of film or inexpensive fabric. If there is an opportunity to invest a little more money now, in order to invest less later, it is worth overpaying a little for a curtain made of waterproof fabric - it will more reliably protect against splashing water and last longer. It is important to choose a beautiful design of the accessory, and then its low cost will not seem obvious.

As for the shelves and hangers, they just need to be placed correctly, hitting the overall color scheme. If neatness and order reign on the shelves, the guest will not notice much difference between expensive and cheap accessories, and vice versa - there is no point in overpaying for a shelf if the appearance of the jars on it raises vague doubts about the solvency of the owner.