Instructions for using the water heater Ariston 50 liters. General information on Ariston water heaters

Simat water heater instructions for use

Turning on the water heater (water heater, boller.

Instructions / certificates.

Electric water heater - Wikipedia.

User's manual (instruction) for operation.

Specifications, principle of operation and functions.

Do-it-yourself boiler repair: video, photo, instruction.

Ariston | Ariston official website.

Water heater installation. Video instruction youtube.

Termex water heater models for 30, 50 and 80 liters.

Operating Instructions.

Water heaters to buy cheap in obi, heater prices.

Water heater reviews how to choose the best.

Buy electric storage water heaters.

How to disassemble a water heater ariston 10, 15, 30, 50, 80, 100.

Warranty repair.

Operating instructions for electric water heaters.

Ariston electric storage water heaters, buy.

Electric water heater vertical under the sink simat nts.

Reshebnik in mathematics grade 5 vilenkin.n.yaTeenage Mutant Ninja Turtles cartoon downloadNetwork controller driver for lenovoSale of exhibition samples of kitchen in StavropolReshebnik for RPS 4 class Kholodov 1 class part

Ariston sells dozens of models of water heaters with a capacity of 10 to 200 liters. They are reliable, durable and trouble-free. At least that's what the user manual says. However, not a single instruction for the Ariston boiler will help you choose your model.

Boiler Ariston ABS VLS PW 50

How to choose an Ariston boiler?

When choosing a water heater, try to consider the following parameters:

• Storage tank capacity
• Heating element power

The first parameter is selected based on the needs of the user. This takes into account the following proportion - 1 person \u003d 20 liters.

Therefore, count potential users, multiply the number by 20 liters, add 10-20% "in reserve" and start searching for your model, starting from this volume.

The second parameter is determined based on the thermal resistance of the housing and the volume of heated water. Simply put: it is determined by the boiler designers. However, from the user's point of view, there is only one rule: less is more. After all, the lower the power of the heater, the lower the electricity bill.

User manual (instruction) for the operation of the Ariston electric water heater

Therefore, having determined the required volume, choose the model with the lowest power of the heating element.

And now let's take a closer look at the most popular boiler models, dividing Ariston's product range into three groups:

• Water heaters for 1-2 users – up to 40 liters.
• Boilers for 3-5 users – up to 100 liters
• Storage heaters for 6-10 users – up to 200 liters

Popular boilers up to 40 liters

Kitchen boiler ARISTON PRO15 ST R/3

Designed to heat 15 liters of water.

Main advantages : small dimensions, allowing you to install a heater under the sink; flanged inlet to the tank, facilitating maintenance; safety thermostat.

Main disadvantages : small volume, due to which the boiler cannot be used in the bathroom; the absence of a power cord, which complicates installation - this boiler cannot be “plugged into an outlet”.

• Volume - 15 liters.
• Heating element power – 1.2 kW
• Heating time from 18-20 °С to 60-70 °С - 27-30 minutes.
• Price - 80-85 US dollars.

ABS PRO R 30 V Slim

Boiler Ariston 30 liters, designed for one user.

The main advantage of the model – low power consumption.

Main disadvantage – the ability to serve only one person. However, this model covers all the needs of its owner, supplying hot water to both the kitchen and the bathroom.

Main characteristics:

• Volume of the tank - 30 liters.
• Heater power - 1.5 kW.
• Heating time – 1 hour 5 minutes.
• Water temperature – up to 70 °C.
• Price - 85-90 dollars.

Demanded models up to 100 liters

ARISTON SG 50

Boiler Ariston 50 liters, designed for a family of two. This model is completed with a reliable mechanical regulator and is calculated on water heating up to 75 °C.

The main advantage of the model - low price with decent quality.

Main disadvantage - inconvenient location of the temperature controller.

The main characteristics of the model:

• Storage tank volume - 50 liters.
• Heater power - 1.5 kW.
• Warm-up time up to 75 °С - 2 hours 10 minutes.
• Price – up to 75 USD.

ARISTON SG80

Mounted boiler Ariston 80 liters, designed for the needs of a family of three. However, installing a heater in the bathroom - to serve only the shower - makes it possible to increase the number of users to four people.

Main advantage - energy efficiency - the boiler has the lowest power in the heating element segment.

Main disadvantage – low rate of water heating.

Main characteristics:

• Tank capacity - 80 l.
• Heating element power – 1.5 kW
• Warm up time – 3 hours 40 minutes.
• Maximum water heating temperature – 80 °С.
• Price – 80 USD.

ABS VLS PW 80

Compact boiler Ariston 80-liter capacity, designed for hidden or open installation.

Easily serves the needs of a family of 3, and in the fast heating mode it can serve up to four users.

Main advantages - compact size and two heaters, accelerating the heating of water.

Main disadvantage - overpriced, explained by the use of an electronic control unit with automatic diagnostics and exclusive coating of the insides of the tank - AG +.

Main characteristics:

• Tank for 80 liters.
• Two heating elements for 1 and 1.5 kW.
• Tank warm-up time with one heating element - 3 hours.
• Tank warm-up time with two heaters – 1 hour 30 minutes.
• Water temperature – up to 80 °С.
• Price - 175-180 US dollars.

ARISTON SG 100

Budget boiler Ariston 100 liters, covering the needs of a family of 4-5 people. This water heater is equipped with a proprietary non-return valve and a magnesium anode. The control unit is mechanical.

Main advantage - low cost of the device. Moreover, the operation of the heater will also be relatively inexpensive.

Main disadvantage - prolonged warm-up.

Other features:

• Displacement - 0.1 m3 (100 liters).
• One heating element at 1.5 kW.
• Warm-up time – 3 hours 45 minutes.
• Water temperature – up to 75 °С.
• Price – up to 85 USD.

Boilers Ariston up to 200 liters

ARISTON ARI 200 VERT 560 THER MO

Water heater for 200 liters, serving 8-10 people. This boiler is made of the most environmentally friendly materials: there is no phenol in the heat insulator, the tank coating is free of nickel, and so on.

Main advantage - the maximum volume that covers the needs of not only at home, but also a cafe or a mini-hotel.

Main disadvantage – long time heating.

Water heater characteristics:

• Volume of the tank - 200 liters.
• Heating element power - 2.2 kW.
• Water heating time – 5 hours 30 minutes.
• Working temperature – up to 75 °С.
• Price - 290-300 US dollars.

ARISTON ARI 150 VERT 560 THER MO

Boiler for 150 liters, serving 7-8 people. Another semi-industrial boiler made from environmentally friendly construction materials.

Advantages and disadvantages match the model described above with a 200 liter tank.

Other features:

• Volume of the tank - 150 liters.
• Heating element power - 1.8 kW.
• Water heating time - 5:00.
• Working temperature – up to 75 °С.
• Price – 280-285 USD

Ariston water heaters - principle of operation and advantages

Italian trademark Ariston is known all over the world for its quality products and rightfully occupies one of the leading positions in the TOP manufacturers of household appliances. The company opened its representative offices in 150 countries of the world. The main products of the company are consumer electronics, gas and plumbing equipment, including water heaters.

Photo 1 Models of water heaters manufactured by Ariston

The principle of operation of a boiler (water heater) from Ariston

The principle of operation for all water heaters is the same. It is necessary to heat the water to a certain temperature using a heat carrier. The only difference is in the details:

• heating rate;
• power consumption;
• energy efficiency;
• cost of equipment;
• maintainability;
• installation and operating conditions.

Electric heating elements are most often used as a heater. They are of two main types:

A more practical option is to use dry heating elements.

not leaving scale during operation. You can buy such Ariston water heaters, starting from 7 thousand rubles. Popular models are ARISTONPROECO 80 VDRY, ARISTONPROECO 50 VDRY. Wet can be picked up from 4 thousand, for example, ARISTON SG 50 or ARISTON SG 100.

Photo 2 Boiler Ariston

The device heats the water to the set temperature, after which the thermostat turns off further heating. When the temperature drops below the set interval, the automation repeats the heating. In this way, the stock is maintained warm water. Boilers allow you to adjust this temperature range.

When buying a boiler from any manufacturer, you must consider the place where it will be installed. The installation method can be both floor and suspended. To save space, the second option is preferable.

The functional difference between the heaters is the volume of the tank. It can be on average from 30 to 150 liters. But you don't have to pay for large volumes. If a family of three lives in a standard apartment, then an 80 liter tank will be enough for them. most suitable budget model for this is Ariston SG 80 with vertical installation.

1 Installation and installation of Ariston water heaters

Electrical components of the Ariston water heater

Cheaper models of water heaters have one heating element each. But it is more profitable to purchase equipment with a couple of independent elements that you can start and turn off on your own.

Boilers with a pair of heating elements reduce the peak load on the wiring, and save electricity costs.

Electrochemical protection is installed on boilers to combat corrosion.

How to use the Ariston water heater?

For this, a sacrificial magnesium anode is mounted inside. less often it is zinc. During operation, the anode gradually dissolves and protects the tank with its particles.

Photo 3 Electrochemical protection

The thermostat control can be hidden.

But often they are used only for the initial setup of the entire device after installation. Then this adjustment is practically not used in everyday use.

Complete set, service, installation

When purchasing equipment, you must make sure that the maximum configuration of additional parts for installation. Otherwise, you will have to buy them yourself.

Important! At the same time with the purchase of the boiler, order an additional electrical cable that can withstand the load of the water heater.

Among other things, you will need blast valve, installed to manually relieve pressure before supplying water to the tank.

Immediately you need to stock up on fasteners for installation, water pipes and connecting elements for them. It is mandatory to install a coarse filter and autonomous power management.

Installation can be carried out by licensed specialists of the company. At the same time, the warranty obligation for the repair and maintenance of the device remains. Installation by third parties is allowed, but subject to the basic rules for safe operation:

• properly installed grounding;
• parity of the cold water pressure at the inlet with the pressure at the heater;
• connection to the water supply with exclusively rigid pipes;
• free access to the device.

Advantages over competitors

Products fit perfectly into the formula for matching price and quality. Most often, negative reviews are obtained with improper installation and connection.

The main advantages of the company's boilers are as follows:

• fast enough heating of water;
• the possibility of using batch heating;
• additional cleaning of bacteria using the eco function;
• application of nanomix for economical filling of the tank;
• protective ag+ silver coating with antibacterial properties;
• use of magnesium anodes;
• a huge selection of shapes, colors and price categories.

The use of boilers with gas heating

Ariston gas boilers are separated into a separate SGA series. They operate with an open combustion chamber and conventional draft. Wall units are available in formats from 50 to 100 liters. For floor boilers, the volume of models has been increased to 200 liters. According to the power consumption, they are divided into industrial and household. Wall-mounted ones consume from 3 to 4.4 kW, and floor-standing ones up to 8.5 kW.

The maximum allowable pressure for the operation of gas boilers is 8 bar. The use of liquefied gas is allowed. Low gas pressure does not significantly affect the stability of operation.

Complete set of gas boilers Ariston:

• piezo ignition with flame signaling device;
• high quality thermal insulation;
• protective magnesium anode;
• safety block with gas valve;
• regulator and water temperature indicator.

Features of a gas boiler

It is possible to regulate the temperature in the range from 40 to 70 degrees. The tank is made of steel 1.8 mm thick and coated with high-strength enamel. The outer casing is made of steel. The device is adjusted and ready to work with gas pressure up to 13 mbar, corresponding to the Russian standard.

Photo 4 Ariston gas boiler diagram

Indirect water heaters

The company Ariston is engaged in the production of boilers with indirect heating. This principle of operation allows you to use simultaneously at several points of consumption. The work consists in the fact that a coil with a coolant is installed in the tank, passing through which the coolant heats the water in the tank.

The main series of this type are marked "BS 1S", "BS 2S", "BACD". The design can be different, and the volume of tanks varies from 150 to 500 liters. The tanks are coated with titanium enamel. It is possible to additionally install a heating element in such devices.

Devices marked "BS 1S" are connected to a gas carrier and are made in a floor version. Boilers "BS 2S" can be connected to solar collector, and "BACD" are sold both in floor and in wall version. They also run on gas.

http://www.portaltepla.ru

The well-known Italian brand Ariston, which is a major manufacturer of consumer electronics, is well known and loved by Russian consumers. The long history of the company, which began with a simple business of an Italian family, once again testifies to the popularity and recognition of the brand far beyond Italy. The Ariston Margarita 2000 washing machine is practicality, reliability and durability. It is intended, first of all, for people who value simplicity and stability.

Overview of technology, a set of functions and programs

The ariston Margherita 2000 series includes several models of washing machines. All of them have great functionality, have high rates in terms of the quality of washing clothes, rinsing and spinning them. Each new model of the machine in this series is a more advanced version of its predecessors. Automatic machines are economical devices in terms of the amount of energy and water consumed during operation.

The most popular Margherita 2000 models are als88x and als109x. They differ little from each other. They have different years of production, the als109x automatic machine is a little newer. It has all the qualities of its predecessor, but there are some differences. In the newer model, the manufacturer has increased the amount of laundry allowed to load from 5 kg to 6 kg. The maximum spin speed has also increased from 800 rpm. up to 1000. The dimensions of the equipment itself remained the same - 85cm * 59.5cm * 40 cm.

A distinctive feature of Ariston Margherita 2000 is the possibility of high-quality washing even at a temperature of 40°C. The presence of the Cashmere Gold program, which allows you to wash woolen products marked “hand wash only” at low drum speeds (90 rpm), also distinguishes this device from other brands. When using it, the fibers of the fabric are not destroyed and do not deteriorate even during rinsing.

The control panel is quite simple. On the left is a compartment for detergents, on the right is a switch and program start, buttons for basic and additional functions, door lock indicators, and an on / off button for the washer.

The detergent dispenser has a semicircular shape and is divided into four compartments. Above it is the key to the programs. It contains a description of the washing programs and button functions. This is very convenient, since the user does not have to look at the instructions for the device every time before use.

Number of washing modes - 9. Class A at 40°C and daily wash are additional programs.

Specifications

Ariston Margherita 2000 is a free-standing model of the machine, with the possibility of embedding. It has a front loading type. The maximum amount of laundry to be loaded is 6 kg. There is a system of protection against leaks Menalux. Additional features include the " hand wash wool", which is described above. The delayed start option allows you to delay the start of the program by 1, 6, 9 or 12 hours.

The weight of the machine is 67 kg. The base color of the case is white. The manufacturer's warranty is 1 year. Energy efficiency and washing class - A. Spin class - D.

Before installing the machine, you should definitely read the instructions, which contain diagrams and detailed descriptions how to connect the device correctly.

The manufacturer claims that correct installation technology and its appropriate operation, will extend the service life for years.

Advantages and disadvantages

The advantage of technology is its capacity, with small sizes, optimal set of programs, simple operation. Such a machine will be easy to use even for the older generation.

The advantages include greater savings in energy resources, relatively low level noise emitted during operation.

But the lack of some important options, such as child lock, is a minus.

Water heaters Ariston 80 liters - user manual

Appearance washing machine pretty simple and boring. The manufacturer also did not finalize this.

User Reviews

Katya, Yekaterinburg

Very roomy and compact design. Prices for it in stores are quite acceptable for the average person. For more than 10 years of use there were no breakdowns. Therefore, reliability and durability are pluses.

The downside is the lack of an electronic scoreboard from which you can track all the washing cycles. A child lock would also be nice.

Ivan, Tyumen

We bought a washing machine 15 years ago. Over the years, it turned out that the technique is simply not killed. When working, it does not make loud sounds, the programs have never gone astray. The buttons, however, have faded over time. But this is a trifle. But the fact that it began to rust is already a problem. Although, this is more likely from improper operation than a defect of manufacturers. In general, I am satisfied with the washer, I think that it will last a couple of years.

George, Samara

The technique easily copes with its main task. Washes things perfectly, does not leave stains. But it rumbles and makes noise in the spin mode. There is always water in the bleach and rinse compartment, which must be wiped off after each cycle.

Inna, Moscow

I have been using the Ariston Margarita machine for about five years. The absence of breakdowns is the main proof that it is really reliable. It is very pleasing that it is possible to independently select the water temperature and the number of revolutions during the spin cycle. It holds a lot of things, while this does not affect the result of the work. The design is a bit simplistic. But for technology, this is not the main thing.

The result of the review will be the following conclusion: "Ariston Margarita" is Italian classic, tested over the years by thousands of Russian users. The fact that the units work up to 10 and over years only confirms the build quality of the Ariston equipment - perhaps this will help you in choosing a washing machine.

Ariston, brand, Margarita 2000, machine, model, disadvantages, review, reviews, advantages, washing, functions

Certificate of Conformity TS RU C-IT.AYA46.V.70803

Electric water heaters of the trademark "Ariston" models: (see Appendix - forms No. 0221821, 0221822)

Information from the register:

Chapter: Product Compliance Certificate technical regulations Eurasian Economic Union

Registration number of the certificate of conformity: TS RU S-IT.AYA46.V.70803

Certificate validity start date: 03.08.2015

Certificate expiration date: 27.01.2018

Submitted documents: Application No. 116-220 / TRTS dated 06/29/2015. Typical representative - Electric water heater of the Ariston trademark, model: ABS Pro 15, ABS VLS PW 100

Reason for issuing the certificate: Test reports No. 58/15, 59/15 dated 01/21/2015. Testing laboratory of technical equipment for electromagnetic compatibility parameters of the Federal budget institution"State Regional Center for Standardization, Metrology and Testing

Applicant type: foreign legal entity

Type of applicant: Manufacturer

Full name of the applicant:"Ariston Thermo SpA", (Person authorized by the manufacturer: Company with limited liability Ariston Thermo Rus.

Home master: water heater Ariston 80 liters instruction

Contract No. b/n dated XX.XX.XXXX OGRN: XXXXXXXXXXXXX, Information on state registration: Registered by the Inspectorate of the Ministry

Applicant's location address:

Applicant phone number: +0732603609

Fax number of the applicant: +0732628200

The address Email applicant: [email protected]

Manufacturer type: entity

Full name of the manufacturer: Ariston Thermo SpA

Manufacturer's location address: ITALY, Fabriano (AN), Viale A.Merloni, 45 CAP 60044

Certification object type: serial production

Product Type: Imported

Full product name: Electric water heaters of the Ariston trademark

Information about the product (type, brand, model, grade, article, etc.) providing its identification: models: (see Appendix - Forms No. 0221821, 0221822)

Code according to the Commodity Nomenclature for Foreign Economic Activity (TN VED): 8516108000

Technical regulation: TR TS 004/2011 "On the safety of low-voltage equipment"; TR TS 020/2011 "Electromagnetic compatibility of technical means"

Number of application form to CC for the manufacturer's table: 0221823

Full name of the manufacturer (Appendix):"Ariston Thermo SpA";"Ariston Thermo SpA";"Ariston Thermo S.p.A.";"Ariston Thermo Benelux S.A/N.V. Legal”;Limited Liability Company “Ariston Thermo Rus”;”Ariston Thermo (China) Co., Ltd”;”Racold Thermo Ltd.”;”Ariston Thermo Vietnam”;”

Manufacturer's location address (Appendix): ITALY, Strada Provinciale Frasassi 60040 GENGA (AN) Namur Malonne (B) N Entreprise-Ond

The number of the application form to the SS for the product table: 0221821, 0221822

Product Table (Appendix):

Full name— Electric water heaters brand "Ariston"
- models: ABS PRO 15, ABS VLS PW 100, ARI 200 STAB 560 THER MO VS EU, ARI 300 STAB 560 THER MO VS EU, ARI 200 VERT 530 THER MO SF, CHX 10 PL, CHX 10U PL, CHX 15 PL, CHX 15U PL, CHX 30 PL, ANDRIS R 10 PL, ANDRIS R 10U PL, ANDRIS R 15 PL, ANDRIS R 15U PL, ANDRIS R 30 PL, BLU EVO R 10 PL EU, BLU EVO R 10U PL EU, BLU EVO R 15 PL EU, BLU EVO R 15U PL EU, BLU EVO R 30 PL EU, PRO R 120 V 2K CZ EU, PRO R 150 V 2K CZ EU, VLS 50 EU, VLS 80 EU, VLS 100 EU, PRO R 120 V 1.8K PL EU, PRO R 150 V 1.8K PL EU, PLT ECO EVO 50 V 1.8K PL EU, PLT ECO EVO 80 V ECO EVO 120 V 1,8K PL EU, PLT R 120 V 2K EU, PLT R 150 V 2K EU, VLS 50 EU, VLS 80 EU, VLS 100 EU, VLS INOX 50 EU, VLS INOX 80 EU, VLS INOX 100 EU , NTS 120 2K EU, PLT R 50 V 2K EU, PLT R 80 V 2K EU, ABS VLS EVO PW 30, ABS VLS EVO PW 50, ABS VLS EVO PW 80, ABS VLS EVO PW 100, ABS VLS EVO QH 30, ABS VLS EVO QH 50, ABS VLS EVO QH 80, ABS VLS EVO QH 100, ABS VLS EVO PW 30 D, ABS VLS EVO PW 50 D, ABS VLS EVO PW 8 0 D, ABS VLS EVO PW 100 D, ABS VLS EVO QH 30 D, ABS VLS EVO QH 50 D, ABS VLS EVO QH 80 D, ABS VLS EVO QH 100 D, ABS VLS EVO INOX PW 30, ABS VLS EVO INOX PW 50, ABS VLS EVO INOX PW 80, ABS VLS EVO INOX PW 100, ABS VLS EVO INOX QH 30, ABS VLS EVO INOX QH 50, ABS VLS EVO INOX QH 80, ABS VLS EVO INOX QH 100, ABS VLS EVO INOX PW 30 D, ABS VLS EVO INOX PW 50 D, ABS VLS EVO INOX PW 80 D, ABS VLS EVO INOX PW 100 D, ABS VLS EVO INOX QH 30 D, ABS VLS EVO INOX QH 50 D, ABS VLS EVO INOX QH 80 D, ABS VLS EVO INOX QH 100 D, REG 10 EU, REG 10U EU, REG 15U EU, REG 30 EU,
TN VED codes — 8516108000

Information about the product, providing its identification— SIMAT 15U/5 EU, SIMAT 30/5 EU, CHX 10 PL EU, CHX 10U PL EU, CHX 15 PL EU, CHX 15U PL EU, CHX 30 PL EU, ANDRIS RS 10/3 EU, ANDRIS RS 10U/3 EU, ANDRIS RS 15/3 EU, ANDRIS RS 15U/3 EU, ANDRIS RS 30/3 EU, ANDRIS LUX ECO 10/5 EU, ANDRIS LUX ECO 10U/5 EU, ANDRIS LUX ECO 15/5 EU, ANDRIS LUX ECO 30/5 EU, ANDRIS R 10 PL EU, ANDRIS R 10U PL EU, ANDRIS R 15 PL EU, ANDRIS R 15U PL EU, ANDRIS R 30 PL EU, ANDRIS LUX ECO 15U/5 EU, SHP PREMIUM 50 V 1,8K EU, SHP PREMIUM 80 V 1,8K EU, HP PREMIUM 100 V 1,8K EU, SHP PREMIUM 50 V Slim 1,8K, SHP PREMIUM 65 V Slim 1,8K, PRO ECO EVO 50 V 1,8K PL EU, PRO ECO EVO 80 V 1,8K PL EU, PRO ECO EVO 100 V 1,8K PL EU, SHP ECO EVO 50 V 1,8K EU, SHP ECO EVO 80 V 1,8K EU, SHP ECO EVO 100 V 1,8K EU , PRO R 100 VTD 1.8K EU, PRO R 100 VTS 1.8K EU, PRO R 50 V 1.8K PL EU, PRO R 80 V 1.8K PL EU, PRO R 100 V 1.8K PL EU, BLU R 50 V 1.8K PL EU, BLU R 80 V 1.8K PL EU, BLU R 100 V 1.8K PL EU, SHP ECO EVO 65 V 1.8K EU, CHX 50 R PL EU, CHX 80 R PL EU , CHX 100 R PL EU, PRO R 80 H 1.8K P L EU, PRO R 100 H 1.8K PL EU, ARI 200 VERT 560 THER MO EU, ARI 200 VERT 530 THER MO EU, PRO R 150 VTS EU, PRO R 200 VTS EU, CHA 150 VERT 530 STEA MO EU, CHA 200 VERT 530 STEA MO EU, CHA 150 VERT 530 THER MO EU, CHA 200 VERT 530 THER MO EU, CHA 300 STAB 560 THER MO EU, ABS ANDRIS LUX 10, ABS ANDRIS LUX 10U, ABS ANDRIS LUX 15, ABS ANDRIS LUX 15U , ABS ANDRIS LUX 30.
TN VED codes — 8516108000

Full name of the Certification Body that registered the certificate: Certification body "ROSTEST-Moscow" CJSC "Regional body for certification and testing"

Certificate number of the certification body: RA.RU.10AYA46

Legal address of the certification body: 119049, Russian Federation,

Moscow, st. Zhitnaya, 14, building 1

Address of the location of the certification body: 117418, Russian Federation, Moscow, Nakhimovsky prospect, 31

Date of registration of the certificate: 27.04.2015

Phone number of the certification body: +74956682715,+74991291911

Fax number of the certification body: +74991249996

E-mail address of the certification body: [email protected]

Surname Name Patronymic of the expert: Kruglova Olga Nikolaevna

EVN Ariston - Installation and use

Proper installation and connection of Ariston storage water heaters for 15, 30 and 50 liters

Model range: Ariston Velis 50, Andris lux 30, Andris lux 15 ur

For self connection electric water heaters the first thing to do is choose a location and install. Most often, these devices are placed in the bathroom or in the toilet.

Please note that EWH for 50 liters or more takes up considerable space. The closer the device is to watershed points, the less heat loss.

Installation

Of course, the easiest way to install a floor water heater. All you need to do is choose a location. If the floor covering has defects, it is recommended to level the floor in advance (pouring a screed or laying a tile).

Installation of wall-mounted boilers takes place in several stages:

First, mark up the fasteners. To do this, you will need to measure the distance between the openings for the hooks on the back of the device. You can make notes with a pencil using building level. Using a puncher, drill holes for the fasteners. Anchors can be used as fasteners. Fasteners are selected based on the mass of the boiler. For small EWHs, 10mm anchors are quite suitable, for 30-liter ones, 12-millimeter ones are used.

Water supply

The next stage is the connection to the water supply. First, think over the scheme, draw it on paper, and then transfer it to the wall. Drill holes along the entire length of the pipes and install clips. Turn off the tap at the water inlet, a tee is installed on the branch closest to the electric water heater. A pipe is drawn from it to the device. A tap must be installed on the pipe, for ease of maintenance, a strainer and a check valve.

Next, bring a flexible hose to the EWH and connect it to the branch pipe. Most often, the input is denoted blue color. Similarly, a branch is drawn to the watershed point. Experts do not recommend connecting without a hose. It is not only beautiful, but also reliable. In the event of sudden pressure surges, the entire blow will fall on the tank.

After you connect all the nodes, open the taps and check all connections for leaks. If a leak is found, then reconnect or add more tow to the threads.

Electrical connection

At this stage, it is also very important to think over the scheme correctly. To connect less powerful models of Ariston water heaters for 15 and 30 liters, it is allowed to use moisture-resistant sockets, while powerful devices must be connected with a separate wire, which is output to the machine.

How to turn on the water heater "Ariston"?

It is very important to use 3-core copper wires with a cross section of at least 2.5mm. Moreover, to protect against breakdowns on the wire, it is recommended to install an RCD.

Then take off plastic cover boiler and connect the wire according to the marking. Then bring the wire in plastic boxes to the electrical panel and put it on the machine. The final stage is to check the performance of the connected Ariston water heater. Open the valves and turn on the electricity.

Turning on the Ariston boiler after installation

For the initial start-up of the device, it is necessary to carry out a number of actions: Before the first start-up of the boiler, fill the tank, for this you need to turn off the hot water supply tap on the riser, then open the water supply valve at the outlet of the electric water heater. Turn off the valve hot water and bleed the air out of the container. As soon as water flows, you can close the valve.

Visually inspect pipes for leaks. After that, set the temperature with a thermostat, the most optimal temperature is 60-65 degrees, this will save energy as much as possible and will contribute to minimal scale formation. Next, you can connect the boiler to electricity, after which the light will turn on.

The time during which the 50-liter Ariston Velis EWH tank is completely heated is about two hours. After this time, the device will be ready for operation. Follow for half an hour and see if the fluid is heating up.

Fill the container with water. You learned how to do this correctly above, using the example of the 1st option. Connect the device to the mains. Set the time by pressing the plus and minus buttons, the transition from hours to minutes is done by pressing the set key.

The next steps for the conversion electric water heater: use the on / off keys to turn on the boiler, pressing plus and minus, set the most comfortable temperature, from 40 to 80 degrees, the manufacturers set an acceptable temperature of 70 degrees. The indicator on the monitor will come on when the water reaches the set temperature.

Water heater with digital monitor. If you install the device in a horizontal position, then in order to change the monitor position to horizontal, you need to simultaneously hold down the “mode” and “eco” keys and hold for several seconds. Starting is done with the on/off button.

Next, you will need to select 1 of the 4 modes with the “mode”-MANUAL button (in this mode, you yourself set the desired heating by pressing the “set” key) or P1 (start heating at 9 am at 70 degrees), P2 (start at 7 pm at 70 degrees), P1 + P2.

Ariston sg 30 or

How to start the electric water heater Ariston sg 30 or. To do this, you will need to perform a number of such actions: Fill the device with water. Next, check all joints and connections for leaks.

Turn on the boiler by pressing the button on the device. Set the temperature by turning the regulator, the most acceptable position is “E”.

How to use correctly storage water heater Ariston

In the configuration of each device there is an instruction manual, but most often everything is described there in technical terms and it can be difficult for a person who is far from this to understand what it is about.

launch

After inspecting the inlet pipe to the boiler, find the check valve. If the pressure is higher than normal, water will ooze out of it. That is why you should install a basin under it, or bring a hose into the sewer.

Pick up a tank. To do this, open the valve for inlet and outlet of liquid from the boiler. Rotate the valve knobs 90 degrees counterclockwise. Open the hot water valve. Now you need to wait a bit until the tank is full. If water begins to flow out, it means that the device is full. It is recommended to visually inspect all pipes for leaks. If you find a leak in some place, turn off the water and call the master to fix the problem.

Connecting the boiler to the electrical network. All that is required is to insert the plug into the socket or turn on the machine to which it is connected. electrical cable. The machine is located near the location of the water heater or in the switchboard. Set the desired water temperature. Experts advise setting 60 - 65 degrees. Higher temperatures contribute to the accumulation of scale, and at lower temperatures harmful bacteria multiply. The temperature can be set using a mechanical knob, as in the Ariston SG 30 OR models, or with the keys on the panel, as in the VELIS EVO PW models. In principle, this is all, now you need to wait until the device heats the water. For maximum comfort, you can mix hot water from the boiler with cold water from the tap, while obtaining the desired temperature.

Water heating

Based on the volume of the tank 30, 50 or 80 liters, the initial heating time will be different. It will take approximately 1 hour to warm up a 30-liter tank of Andris lux 30 to 65 degrees, a 50-liter tank of a VELIS boiler will take a little more - 2 hours, and a tank of 80 liters will heat up in 3 hours.

The time for which the heating will take place also depends on the heat of the incoming water and the power of the boiler. So, for example, in winter period the incoming liquid is icy and, accordingly, it takes a little more time to heat up.

Water heaters with powerful heating elements heat water much faster, but consume more electricity.

Use of the shower and bath

For such purposes, Ariston TI TRONIC INDUSTRIAL for 300 liters is excellent.

To be sure that there will be residual water, you can set the thermostat to the maximum value. Showering uses significantly less water.

How does an Ariston storage water heater work?

How is water heated

How does a water heater work? Inside the device there is a tank in which there is a heating element. The principle of operation of EVN. Cold water enters the electric water heater from the central water supply. There are 2 tubes in the tank - one of which is designed for cold water supply, equipped with a divider for constant heating (located at the bottom). The second tube for the intake of hot water (located at the top).

The time of full heating depends on the volume of the tank (from one to five hours). The desired temperature is set individually, using a thermostat (it can be mechanical and electronic, the latter shows a more correct temperature), the maximum temperature is 75 degrees.

After the EWH reaches the set temperature, the device turns off by itself, the temperature is maintained constantly while the device is connected to the mains, it does not matter if the water was flowing or it just cooled down. The water in the tank does not mix due to the fact that the incoming cold liquid displaces the hot liquid up.

The mechanism responsible for heating water is called a heating element. Based on how many liters your water heater depends on the number of heating elements (there can be from one to six) and their power. If the device has two heating elements, then you can reduce the load and use the device in economy mode.

For example, for fifteen-liter devices, one heating element with a power of 1.2 kilowatts per hour is quite enough; in 80-liter ABS VLS EVO PW 80 models, two heating elements are installed, the power of which is 2.5 kilowatts per hour. The time for which the electric heater heats up depends on the power of the heating elements.

Why thermal insulation is needed

The Ariston electric water heater is a tank, it can be enameled or silver-plated (in expensive models), the body is closed. The service life of enameled steel tanks is longer, and the formation and accumulation of scale is much less.

To maintain the heating temperature, there is a heat-insulating layer between the tank and the body. Foamed polyurethane or foam rubber is most often used for thermal insulation.

Heat loss in fifty-liter EWH is about 12 degrees in 24 hours. This is subject to good thermal insulation, if the outside of the tank is warm, this indicates that the thermal insulation is very weak, and heat loss occurs. When you open the hot water valve, it comes out of the appliance, in order to adjust the temperature, open the cold water and equalize.

___________________________________________________________________________________________

___________________________________________________________________________________________

___________________________________________________________________________________________

Thermex water heaters
What should be done if the Termex boiler starts to leak? In each model, the causes of leakage may be different. If you have a Safedry EWH with a dry heating element in operation, then one of the reasons ...

Ariston water heaters
Malfunctions that you may encounter when using the Ariston storage water heater: The heater may not start; Drain valve…

Water heaters Edisson
The set temperature is 70 degrees, it also shows about 70. When the consumption is on the display, the temperature decreases, the heating turns on. That is, as a full-fledged work. And the real...

water heater Haier
When supplying previously disconnected hot water, hot water went through the blast valve, practically in a jet. The secant valve on the main line was opened and…

Zanussi water heaters
Electric water heater Zanussi 80 liters. Is the operation affected by low inlet water pressure or weak electrical voltage? EVN can perform…

AEG water heater
Electric water heater AEG EWH 50 Comfort EL in operation. What influences the temperature of water heating? Which one is better to show? The first thing that affects...

Water heaters Electrolux
He installed and connected the Electrolux EWH 80 Royal Flash electric water heater, the last time the heating element was changed more than three years ago. In general, we have been using them for about five years. There was…

Water heater Polaris
I start the storage water heater Polaris Ultra IMF 50 V, it heats up to a certain temperature and turns off completely. Previously everything was fine, heated ...

An analysis of sales of the domestic market for water heating equipment shows that the undisputed leader here is the products of the Italian company Ariston. Consistently high quality, reliability, ergonomic design - that's what attracts consumers to the products of this company. Among the many models, the most popular are Ariston 100 l water heaters, since they are able to satisfy the daily need for hot water for a family of 3-4 people. It consists of a body and a tank covered with insulating material, as well as a heating element and control devices (thermostat, control unit).

The manufacturer, among others, manufactures installations that have a volume of 100 liters. Mostly electrical devices accumulative type, which are used to heat water in apartments, private houses and other premises connected to the mains. They are presented in the following series:

1. Ariston ABS Velis (QH, INOX QH, POWER, INOX POWER, PREMIUM).

The abbreviation ABS means that all models are equipped with the Absolute Bodyguard System - a residual current device. In the event of power outages, water leaks or problems with the pressure valve, the system blocks the operation of the device, making it absolutely safe. The main difference between Velis 100 V and other series of units is that they are equipped with 2 internal independent tanks, in which it is installed according to the heating element.

This allows you to get water heated to 45 ° C already 53 minutes after switching on. Both tanks are internally treated with a layer of AG+ (plating with silver content), which helps to protect the body from corrosion. The wall-mounted storage electric water heater Ariston Velis can be mounted on the wall in any position: vertical or horizontal. A digital display with programming function is installed on the front panel of the boilers.

2. Overview electric water heater Ariston ABS PRO R 100 V indicates that the unit is equipped with a tank made of cold rolled steel. Its surface is coated on the outside with a layer of finely dispersed enamel, which provides protection against leakage and corrosion. The Ariston ABS PRO-R 100 electric water heater is equipped with an on / off indicator, a reliable mechanical thermostat and a heating scale displayed on the outer panel of the device. In addition, it has a special magnesium anode that protects the heating element from premature wear.

In the production of a metal tank of a 100 l Ariston ABS PRO ECO 100 V storage water heater, a special welding technology (microplazmatig) is used, due to which high strength and durability of the seams are achieved, and the boiler is able to withstand pressure drops up to 15 atmospheres. Silver-derived ECO coating neutralizes harmful chemical elements. The unit is equipped with an electric thermometer that allows you to monitor the operation of the boiler in real time, providing constant temperature control.

1. Ariston ABS Blu.

The devices of this series are represented by the R and ECO model lines. The description of the Ariston Blu R100V vertical water heater suggests that this modification is equipped with a simple mechanical thermostat. storage capacity the outside is covered with a protective layer of polyurethane, which contributes to the fastest possible heating. The walls of the tank are covered with a protective layer of Ag+ from the inside. Another model - BLU ECO POWER 100V, is equipped with an electronic thermostat and a digital display. It is intended for the accelerated heating of water.

The series includes compact boilers TI TRONIC, TI TECH and TI SHAPE. Ariston TI TRONIC is a high-quality water heater equipped with a mechanical device for temperature control. The inside of the container is treated with Titanium + technology, which provides it with protection against rust formation. The Ariston TI TECH QB 100V compact water heater device is equipped with a simple thermostat, but it has more power and heats water faster up to desired temperature.

3. Ariston Perla.

This is a type of heating devices that combine 2 heating methods. For example, the technical characteristics of the Ariston PERLA 100 VRDT / 5 combined water heater are such that, thanks to the heat exchanger built into the tank, heating season it can function as an indirect type heater. Then a 1.5 kW heater makes it possible to use it as an electric boiler, for this it is only necessary to turn off the tap connecting the installation to the heating system.

Models of this series also belong to the combined type and are equipped with two types of heaters: a heat exchanger and a heating element. In addition to the main thermostat, the SG R 100 LTDTS has an additional one, which makes the work completely safe.

In addition to the above electric heaters, Ariston also produces units with a tank volume of 100 liters, powered by another source of energy - gas. but the lineup of such installations is limited to SGA products. Gas installations have natural draft and an open combustion chamber, which makes it possible to receive heated water regardless of the pressure in the gas and water supply system. In addition, they are equipped with a piezo ignition device with a built-in thermocouple that controls the flame. Modification of the wall-mounted boiler SUPER SGA is used for domestic and industrial needs.

Technical characteristics of water heaters with a tank of 100 liters

Series	Model	Indicators
		power, kWt	Voltage, V	Working temperature, °C	Pressure, bar	Water heating time up to 45 °C, min	Dimensions, mm	Weight, kg
Velis	QH,INOX QH	1,5+1	230	80	8	first tank - 53, second - 139	1275x490x270	30
	POWER, INOX POWER	1,5+1		80		First tank - 91, second - 139
Pro	R	1,5		75		206	913x450x480	26
	ECO	1,5		80		232	1338x450x470	26
blu	R	1,5		75		232	913x450x480	26
	ECO POWER	2,5		80		130	1338x450x470	29
TI	TI TRONIC	1,5		80		232	913x450x480	26
	TI TECH QB	2,0		75		170	963x493x499	34
PERLA	100 VRTD/5	1,5		80		232	913x450x480	25
SG	SG-R100L/RTDTS	1,8		80	6	175	904x450x470	35
SGA	SUPER SGA	4,4	—	45	8	71	950x495x510	35

Advantages and disadvantages

TO positive qualities Ariston boilers include:

• Rapid heating of the required volume of water.
• Processing of tanks using AG+ and Titanium+ technology.
• ABS system, which protects installations from breakdowns associated with power surges, leakage, and so on.
• Simple, reliable mechanical and electronic thermostats that allow you to achieve the most accurate control with an error of no more than 1 °C.
• Possibility of use at low pressure in the water supply system.
• The ECO function provides water purification from harmful chemical elements.
• With all the technical innovations used in the manufacture, the price remains affordable for any category of consumers.
• Warranty period from 5 to 10 years.

Judging by the reviews, the water heater is not without drawbacks:

• The load on the power grid increases by an average of 1-1.5 kW.
• When the power is turned off, such equipment will not work.
• The kit does not include brackets for wall mounting, flexible hoses for inlets, and a tube for condensate discharge.

How to install an Ariston water heater

Electric storage boiler Ariston according to the instructions should be installed in dry, warm, well-ventilated areas. This process takes about 2 hours and consists of the following steps:

1. Using a perforator, holes are drilled in the wall for anchors, on which the water heater is hung.

2. With flexible hoses, it connects to the water pipe. As a rule, the cold water inlet is marked in blue. It has a pressure relief valve. The red outlet is connected to the hot tap. Tow is wound on all joints.

3. Taps are opened and all connections are checked for leakage.

4. Using the connector, the device is connected to the mains. The contact on the water heater terminal, marked with the letter L, means "phase", with the letter N - "zero", yellow grounding is marked.

In the event of problems during operation, it is better to entrust the repair of the Ariston boiler to a specialist by contacting an authorized service center.

Such offices are open in all major cities of Russia. Self repair can lead to damage to expensive components and removal from warranty service.

Price

Average prices in rubles in Moscow are different and depend on the series and model of the boiler. The cheapest TI Shape 100 V installation costs 4,800 - 5,660. Moreover, it is worth noting that the price of an Ariston TI Shape 15 UR water heater, equipped with a much smaller tank (only 15 liters), is not much less - 4,100 - 4,500.

• Model ABS Blu R 100 V will cost 5,900 - 7,000.
• You can buy Ariston ABS PRO ECO 100 V for 7,100 - 8,600, ABS Pro-R 100V is somewhat cheaper - 5,800 - 8,380.
• The cost of a 100-liter quick heating water heater Ariston Velis is 12,700 - 14,910.
• Installations of the combined type Perla 100 VRTD / 5 will cost an average of 9,440 to 10,400.
• The most expensive are gas-powered units SGA-17,100 - 1,9,700.

The comfort of a modern apartment is impossible without warm water. But public utilities are in no hurry to make our lives easier and more enjoyable. Therefore, it is necessary to independently take care of the presence of comfort in your home. Hardware stores offer us a huge selection of water heaters. Which one to stop?

If your home is not suitable for installation geysers, then opt for Ariston boilers 80 liters. This is a well-known Italian brand that has become a leader in the design and manufacture of household appliances. In order to dispel your doubts, we will explain the boring instructions in an accessible language.

Features of the water heater

A characteristic feature of water heaters is built-in tank. Water accumulates in it, keeping the temperature set by the program. Such a model will become relevant for those who from time to time have problems with hot and cold water supply. The eighty-liter tank of the model, as the instructions indicate, is ideal for a family of three. Wash the dishes, take a shower, bathe the baby.

The structure of the boiler resembles a thermos: in it, the liquid not only heats up, but also retains heat. Thermal insulation material occupies the empty space between the body of the water heater and the tank. Schematic representation The manual clearly shows this to us. Thanks to him, energy is saved: after all, you do not have to constantly maintain the temperature.

The internal tank of the Ariston water heater of 80 liters is made of high-quality steel, which has increased resistance to corrosion processes. The fact is that under the influence of aggressive environments (constant high temperatures, humidity, changes in water level), metal components suffer first of all. Therefore, the Ariston engineering bureau developed a special alloy, which received maximum resistance to rust corrosion.

The heating element of the water heater (TEN) has a reliable insulation. The feature of the model is heating element material - alloy, which may contain:

• copper;
• stainless steel.

Thermal power is increased by a brass flange.

One of the main parts of the Ariston boiler 80 liters is a magnesium anode. It is made of a special alloy and is attached next to the heating element. Its function is to protect the walls of the water heater tank from rust, to reduce the amount of scale. If you do not start fighting corrosion in time, then over time it will begin to corrode the metal walls of the container and, as a result, it will begin to let water through. Scale layers on the heating element will increase the heating time, which will lead to waste of electricity, and even breakage of the element. Entering into chemical reaction With aggressive environment, the anode shields the internal parts from negative impact. You, of course, will not read this in the instructions for the device, but to obtain general information healthy.

Intelligent control system in which even a schoolboy will understand. The ergonomic design allows you to place the Ariston 80 liter water heater models in a horizontal position. In addition, the equipment is reliably protected from overheating, high pressure.

Water heater installation

So you bought a boiler and carefully study the instructions. Remember that in order for the water heater to work reliably, all installation actions should be entrusted to the service center employees. In case of an error during self-installation, warranty obligations technology does not apply.

Water heater: control system

Before turning on the water heater, you must make sure that there is water in the tank.

When the boiler is connected to the network, within one or two seconds, the temperature readings will be displayed on the screen of the water heater control panel. The instruction indicates that if the numbers flash, then this means only one thing - the device is still turned off. Click on the "On / Off" button (in the upper left corner) to start the technique.

There is a power control button on the remote control. It can be used to adjust the strength voltage from 2500 W to 1500. This function allows you to increase or decrease the time for heating water.

The temperature setting is activated by holding the button (plus or minus) for a few seconds. The range ranges from 30C to 75C. After installation, the water heater remembers the program, working in the specified mode. The instruction says: if the device is turned off, all settings are reset.

If you have not read the instructions to the end, then you do not know about the very convenient function of the water heater - protection against bacteria. Hot water is an ideal breeding ground for all kinds of microorganisms. And heat kills them. By enabling this option, you force the technician to increase the degree above 65, that is, to a level where microbes cannot exist, multiply. Once a month is enough for your water heater tank to be freed from all evil spirits.

Possible breakdowns

Water heaters "Ariston" 80 liters belong to the technique with a high degree of reliability. However, as sad as it is to say, damage does happen.

According to the repair service employees, the most “popular” breakdown is the failure of the electronic scoreboard. Do not panic, flipping nervously through the instructions, this does not affect the overall operation of the water heater. Experts also recommend using not the maximum temperature, but within 60C.

Heating elements for boilers "Ariston" 80 liters need to be changed from time to time. No matter how powerful anti-scale protection is, the quality of our water still does not improve. Therefore, after two or three years, your heating element will turn into a small pebble. If you do not open the water heater, then you can determine the presence of this unpleasant feature by increasing the heating time.

The instructions for the water heater indicate the marking commonly reported errors:

• E2 - an attempt to turn on the boiler with an empty tank;
• E3 - temperature sensor depressurized, short circuit occurred;
• E4 - in case of heating water up to 90C.

If you see any of the above on the water heater control panel, you need to contact the service center.

So, we examined the main characteristics of one of the popular models that Ariston water heaters represent 80 liters. With proper operation, compliance with all the rules of the instructions, this reliable device will serve you for many years. And a wide network of official service centers will nullify discomfort in the event of a breakdown.

Ariston water heaters are popular in the world market. This is due to the high quality of the products and the long service life, if the technical requirements both during the installation of the equipment and during its operation.

Popular models of Ariston water heaters.

Why Ariston water heaters are created

Ariston boilers are designed to heat and maintain the desired water temperature. Equipment is needed if there are interruptions in the supply of hot water. Installation of equipment can be carried out in bathrooms (bath, toilet).

Models and displacement

Due to the popularity of products, the manufacturer produces a large number of models with different characteristics. Models with electric heating elements differ in volume and the presence of a storage tank, power, water temperature limit. The higher the power of the heating element, the higher the maximum heating temperature.

There is also a difference in dimensions, weight and installation methods (vertical, horizontal).

The list below shows the most popular Ariston brand models on the market - a water heater and its brief description:

1. ABS VLS (VELIS) ​​EVO PW 50- electric storage water heater. Volume - 50 l, equipped with a quick heating function, an electronic thermometer to monitor the water temperature, a safety device to protect against turning on if the tank is empty.
2. NTS 80V 1.5K SU 3700366- electric storage water heater. Volume - 80 l. Equipped with an external temperature controller in the form of a round scale.
3. ABS VLS EVO INOX PW 80 D- electric storage water heater. Volume - 80 l. The tank consists of 2 40-liter compartments. It has the possibility of accelerated heating, in the presence of 2 heating elements.
4. ABS PRO R 100V- electric storage water heater. Volume — 100 l. The model is equipped with protection against overheating (ABS security system). Energy savings are ensured by polyurethane foam insulation. Vertical installation provided.
5. ABS ANDRIS LUX 30- electric storage water heater. Volume — 30 l. The model has a bottom water pipe connection. The tank is made of steel, the inner coating is Ag+.

There are also small models with tanks of 15 and 10 liters. All the mentioned products in Tyumen can be purchased at the QUANTA + online store.

Typical boiler diagram Ariston 50

Components of the electric storage water heater Ariston.

Electric storage water heater Ariston consists of:

• outer case;
• bracket;
• internal tank;
• hot water outlet;
• magnesium anode;
• cold water inlet;
• heat insulator;
• thermostat sleeves;
• heating element (TEN);
• flange;
• thermostat;
• power cable;
• regulator knobs.

To connect the Ariston boiler correctly, you must follow the manufacturer's instructions.

First, the water heater is mounted on a wall or a supporting surface and a drain is provided from water pipe(cold water). It is most advantageous to install the device as close as possible to the source of water supply - this allows you to minimize heat loss.

If there is a collector in the system, a separate cold water supply pipe is transferred to the installation site of the water heater. In the absence of a collector, the nearest segment of the water pipe is cut, a standard tee is installed at the cut site.

The installation method of the tee depends on the material from which the pipes are made. On plastic fasteners is carried out using a special soldering iron, on metal - threaded.

A ball valve is installed on a separate section of the water supply system, designed to shut off the supply of cold water.

Scheme for connecting an electric storage water heater Ariston.

To connect the water heater to the water supply, you should:

1. Pay attention to the hot and cold water pipes - it is important not to confuse them. A check valve is installed on a cold one, it can be included in the standard kit. Hot water is connected via a pipe. First, a cold water pipe is mounted, then a hot one.
2. A special tape is wound on the threads as a sealant and sealant, this is recommended by the manufacturer.
3. A tee is installed on the cold water pipe, at the bottom of which there is a relief valve. A tap is attached to the side to completely drain the water from the tank in case of emergency possible under abnormal pressure or heat. A shut-off valve and an adapter are installed under the tee at a short distance. The next step is connecting to the water supply.
4. Connection to hot water is also made by installing a shut-off valve.
5. In the case of connecting different metals, adapters should be used.

The connection to the mains is carried out as follows:

1. V switchboard a separate machine (RCD) is installed, it is connected to a central automatic fuse. A three-core cable is pulled from a separate RCD to the boiler, which is placed in an external cable channel (or a special gate is punched in the wall).
2. It is recommended to install a 16 A fuse as a switch, since the socket and plug are subject to heat and moisture. In addition, the cost of waterproof electrical equipment is higher than the cost of the machine. The "switch" is closed in a compact cabinet with a removable panel.
3. A separate RCD machine and a “switch” are connected by a wire.
4. A three-wire wire is connected to the heating element, for this the bottom panel is removed from the water heater.
5. Then the output of the machine is connected to the boiler.
6. The next step is to wire the ground, phase and zero lines to the appropriate connectors.

Scheme of connecting the Ariston water heater to the mains.

Before turning on the device, you must make sure there are no leaks and the correct position of the flange (strictly in the middle). Then fill the tank cold water and open the hot water faucet to release the air. After the air is released, the valve closes and a trial run is carried out.

How to identify a malfunction

For repair work the user needs to notice a malfunction in the operation of the water heater in time. Ariston boilers are often equipped with an electronic display on which messages appear in case of equipment failures.

Direct signs of a malfunction can be:

• operation of the machine at the moment the boiler is turned on - this indicates a malfunction of the heating element;
• heating water above the maximum allowable temperature - this indicates a failure of the thermostat;
• heating water below the required indicators - this may indicate contamination of the heating element, the appearance of scale;
• drips at the bottom of the tank and on its walls;
• breakdown of the information board, which most often does not cause significant failures in the overall functionality of the device, but can reduce comfort during its use.

Updated:

2016-09-07

Instructions for the water heater Ariston 80 liters and a number of other issues regarding this equipment will be discussed in our material. We will talk about the main advantages of Ariston equipment, the device, the rules for connecting and operating the units.

Ariston products are in rather impressive demand in the domestic market. Many people choose this particular manufacturer when buying a water heater. What is the reason for this? The advantages that a boiler of 30, 50, 80 or even 100 liters carries.

When choosing a boiler for 30, 50, 80 or 100 liters, you should rely on the number of users and the number of consumer points. If this is a small family of 2 people, 30 or 50 liters is enough. But for families of 3 people or more, it is better to take a boiler for 80 or 100 liters.

Now about the benefits of Ariston.

1. Attractive, modern design Ariston. Many are guided not only by the efficiency of the boiler, but also by appearance, since the unit will be located in a conspicuous place. In this regard, Ariston appliances are able to decorate the interior, and not only provide hot water.
2. Long service life. Ariston boilers with a volume of 30, 50, 80 and 100 liters have a factory warranty for several years, but in reality they can serve for more than ten years. This was achieved through the use of special materials that cover the inner walls of the boilers. They protect against scale, rust, plaque.
3. Modern dividers are used. Due to them, cold water does not mix with heated water. Therefore, when heating even a small amount of water in a boiler of 30, 50, 80 or 100 liters, you can use hot water rather than waiting for the full heating of the entire volume of the water heater.
4. Protective mechanisms of the water heater. They work very efficiently, responding to potentially dangerous power surges. This largely ensures such a long service life of Ariston equipment, which we talked about earlier.
5. Antibacterial protection. With its help, you can safely wash under water from a boiler that has been operating in your house for more than a year, without fear of water contamination.
6. Protection of the water heater from an empty tank. Everyone knows that it is impossible to turn on the boiler when the tank is empty. Otherwise it burns out. But there have been many precedents. Unlike them, Ariston water heaters are equipped with special mechanism, which does not allow the device to be put into operation if the tank is empty.

Device

Now let's see what components a modern Ariston water heater consists of. In fact, regardless of the tank of 30, 50, 80 or 100 liters, the design remains identical. Only differences are in the size of the elements, their characteristics, capabilities.

• Water heater body. This is the outer shell that hides all the internal components. The designers did a great job making Ariston boilers not only efficient, but also very beautiful;
• Internal capacity. Or a tank. This is the same tank where cold water is poured from the water supply system;
• TEN. A heating element that provides heating of the incoming cold water to the boiler. In models with a volume of 30 and 50 liters, one heating element is used, and water heaters of 80 and 100 liters can be equipped with two heating elements at once. This contributes to faster heating of a large volume of water;
• Thermal insulation layer. An effective heat-insulating layer on Ariston boilers contributes to the long-term preservation of the temperature of the heated liquid;
• Pipe and splitter. These devices are responsible for the separation of heated and cold water, as well as the supply of hot liquid to taps, shower heads and other consumers;
• magnesium anode. This is an indispensable element of any boiler. Its task is to prevent salt deposits on internal surfaces. Considering the quality of the water entering the boiler from the centralized water supply, the developers used an improved efficiency anode to cope with less than perfect water. It is not uncommon for the repair of Ariston water heaters to involve the replacement of the anode or heating element;
• Temperature controller. It is necessary in order to turn off the operation of the heating element when the water temperature reaches the user-set mark;
• Thermal relay. An important unit that contributes to the automatic inclusion of the heating element in a situation where the temperature drops below a predetermined mark;
• indicator lamp. This voltage indicator allows you to monitor the operation of the boiler;
• Thermometer. All Ariston water heaters are equipped with built-in thermometers. With their help, the user can monitor the change in the temperature of the heated water.

Useful Features

Having chosen a boiler from Ariston for 100, 80, 50 or 30 liters, it will be useful to know about the capabilities of this equipment.

• Turning on and off. A working boiler is determined by luminous indicators;
• Power adjustment. The user himself sets the parameters on which the equipment works;
• antibacterial mode. To turn it on or off, hold the "Power" button for 5 seconds;
• Temperature change. You can change from 30 to 75 degrees by pressing the + or - buttons.

Installation instructions

Let's be honest, the installation of boilers for 30, 50, 80 and 100 liters is best left to a specialist. But if you decide to do everything yourself, then we recommend that you follow certain rules.

1. Check the condition of the safety valve. If it has visually noticeable defects, be sure to replace it with a new one.
2. When installing the screws used to install the boiler, be sure to use plastic dowels.
3. Make sure that the grounding elements are installed correctly.
4. Use only a separate power line to connect the boiler. No extensions. Choose waterproof outlets.
5. To connect Ariston water heaters, use only the plug that came with the kit.

Operating rules

In order for your Ariston boiler to work for more than one year, and always efficiently heat all 30, 50, 80 or even 100 liters of water, follow certain recommendations for operating the equipment.

• Check the presence of liquid in the container before each shutdown and restart of the equipment. Only when the tank is full can power be applied. Despite the presence of a protective system in Ariston, we do not recommend ignoring this advice.
• If the boiler cord is damaged, the replacement is carried out exclusively with a component of the same manufacturer and with the same characteristics. It is better to buy accessories for Ariston boilers in branded or specialized outlets.
• When planning a long shutdown of the water heater, be sure to drain the old water according to the instructions for your boiler model, then turn off the water supply tap from the water supply system, and then turn off the power.
• Periodically, your Ariston will need a system cleanup. Here we recommend using a warranty and post-warranty agreement so that this procedure is performed by specialists. You can learn all the subtleties, in order to then do the work with your own hands.

Ariston boilers are time-tested water heaters that rightly occupy their high positions in the market.