How and how to lubricate the door hinges so that they do not creak. How to grease door hinges? So that the door hinges do not creak

23.06.2020

It doesn’t matter if the door is expensive or cheap, but sooner or later, when performing direct duties, it begins to make terribly unpleasant sounds: buzzing, creaking, rattle. During the day it is hardly noticeable, but at night it becomes a real test, forcing you not to enter the room once again.

The question of how to lubricate the door hinges so that it does not creak at home is relevant for everyone who has already encountered this problem or is not yet aware of its existence.

Causes of the squeak

Before choosing a method effective disposal from unpleasant annoying and frightening sounds made by the door, it is necessary to find the source of the problem. The reason may be:

Insufficient fit of the fasteners to the jamb, which happens due to violation of the installation rules or the use of unsuitable low-quality elements.
The cladding touches the hinges, which, when moving, rub against the material, deforming it.
Lack of balls in canopies.
Lack or complete abrasion of grease in the hinges.

Sometimes dust gets clogged into the joints of moving parts and small debris gets into it. All this absorbs the lubricant and acts as an abrasive that grinds the metal. The only way out will be complete analysis elements, cleaning and lubrication.

Ways to eliminate the squeak

Solutions to the problem:

If the reason lies in improperly selected fittings, the only way out will be to dismantle the canvas and purchase good parts of the required configuration and dimensions.
Loose fasteners are enough to tighten with a screwdriver desired type. The main thing is not to pinch too much, otherwise the sash will move poorly, which will have a detrimental effect on the duration of the door's operation.
Facing that is not installed correctly. It must be removed and adjusted to the dimensions of the canvas.
Some models of loops cause the presence of balls that can be lost or not included at all. To solve the problem, you will have to remove the loops and put the missing elements inside.
The absence or a critically small amount of an anti-friction agent is the easiest to solve.

If the question arose of how to lubricate the door so that it does not creak, you should know: there are a lot of substances that will help solve this problem.

WD-40

A special liquid is used by motorists who do not disdain to sort out the mechanisms of the machine on their own, perfect for household needs.

Solidol

Viscous and oily, it is a popular household material for lubricating moving door hardware.

Litol

Waterproof, effective and frost-resistant means is suitable both for interroom, and for street shutters. He is not afraid of even a fierce winter.

Tsiatim

Substance of thickened structure with antioxidant effect. Refers to universal kinematic lubricants and can be used to eliminate defects in canopies.

Sewing machine oil

Surely there is every housewife who is engaged in sewing. The lubricant for these mechanisms is almost universal.

car oil

New machine or "working out" remaining after replacement in the engine. It is convenient to apply, and there are almost no streaks on the door.

Folk ways

If there is no special tool, and you need to eliminate the problem urgently, you can use something from what is available in the house:

petroleum jelly - present in every second first aid kit, but in the case of creaking loops it will help for a while;
wax - often used as an independent lubricant;
paraffin - is used more often for the prevention of creaking than for “treatment”;
pencil lead is one of the most reliable tools at hand because it contains oils and wax.

Important: thick lubricants are preferable to liquid ones, as they last longer, do not spread or leave marks.

Solving household problems with the help of improvised means is interested in whether it is possible to lubricate the hinges vegetable oil. It seems to be a very common practice. But doing so is not recommended. For a few days, the nasty sound will really disappear, but then the sunflower oil will thicken, become hard and dark. You will have to completely change the hardware.

Features of lubrication of various types of doors

Having decided how to lubricate the door hinges, it remains to do it correctly. The method of performing work is influenced by many factors: material, location, design.

Iron door

Usually begins to “sing”, sagging due to the heavy canvas and corrosion. iron doors, as a rule, street entrances, mainly all-welded non-separable structures. They will have to be processed on the spot without removing. You just need to pick up a strong stop to lift the sash.

First you need to clean the fittings from dirt and rust deposits, and lubricate in those places where the metal rubs - between moving elements.

The leaked residues must be wiped off, and then the door is opened and closed several times to distribute the substance along the internal hinges.

plastic

Mostly indoor, but there are balconies. In the latter case, the sash is first processed from the street, and then from the side of the room.

The open door needs to be lifted slightly with the stop. Apply a small amount of oil and close the canvas.

Important: grease stains are very noticeable on white plastic, which is not visible immediately, but some time after the procedure. Preferably, before “treating” the door, make a test in an inconspicuous place and observe the reaction of the material to the substance.

Wooden

It is installed mainly in apartments and between rooms. The procedure is carried out according to the generally accepted scheme, but is simplified by the fact that some models are easily disassembled, providing access to fittings. Otherwise, grease is introduced into the gaps on the hinges.

Important: natural wood it is better to protect it from contact with chemicals, as deformation may occur or a stain may remain.

glass

Despite the apparent airiness, such a door is very heavy, therefore special hinges are used in the design - with rubber seals. During installation work, this place is treated with glue to increase reliability and extend the service life.

This feature does not exclude rattle and creak, does not interfere with lubrication, but it is better to know about it when planning to carry out processing.

Important: oil does not wash off glass, therefore it is recommended to use WD-40.

Accordion door

Easy to understand, but requires a thorough approach:

cleaning the groove and wheels from what stuck during the operation of the door;
lubrication of all moving parts.

But the latter is performed exclusively with a special silicone tool. Only rubbish will not stick to him.

Sliding door

Most often, it makes noise not due to poor lubrication, but due to debris that accumulates in all possible places. Some hardened deposits can be cleaned with a wire brush, and other rubbish with a vacuum cleaner.

Important: To make the wheels move more easily, silicone grease is applied after cleaning.

How to apply the composition

Accessories are different, depending on its type and a specific approach is needed. Start from what exactly managed to creak. The video will guide you through the process.

For detachable hinges or canopies

They usually consist of two parts, because the canvas can be removed without unscrewing them completely. In case of abundant rust damage, it is recommended to apply a rag soaked in machine oil for several hours - the oxide can be easily cleaned. After applying the lubricant, the sash is hung immediately in place.

On one-piece hinges or hinges

It can be dismantled only by removing all fasteners - screws. Due to the significant number of elements, they quickly begin to make noise, especially with frequent use. Despite the difficulty in maintenance, they are very popular because they are universal, due to which they are suitable for both left and right doors. They need regular lubrication.

On guides

Before processing, mandatory cleaning is required with the separation of all parts of the fittings in stages. Only with the complete absence of debris can special silicone be applied.

To avoid creaking and other noises that the door can make, it is enough to regularly carry out preventive measures, getting rid of debris and lubricating problem areas.

The creaking of the door is terribly unpleasant. . But eliminating the creak is easy enough. You just need to grease the hinges. Today we will talk about 4 quick and effective ways dealing with creaking door hinges.

1 way. Aerosol WD
This tool is in the car of any motorist. Universal grease based on white spirit with a convenient dispenser can save you from squeaking. However, the effect will not last long. The fact is that the tool is not intended for lubrication, it helps to clean and dehydrate the surface before applying a real lubricant. WD contains oil, but it is not more than 20% of the total composition of the aerosol.

2 way. Machine oil
Any oil that is used to lubricate car parts is suitable here. Choose with the highest viscosity. Engine oil is ideal, and if you find a lubricant called “Litol”, you will forget about the creak in the door hinges for a long time.

To apply the oil, you can use a regular syringe or pipette. Lubricate all moving parts of the hinge liberally, and wipe off excess with a dry cloth. Before oiling, clean the surface well with a WD spray.

3 way. Pencil
Our grandmothers did not have WD, Litol and other joys of civilization, so they used a simple pencil lead. It can be crushed and poured into the slots of the hinges, or you can lift the door and crush a piece inside the mechanism directly with a hinge. The lead contains oil and wax, so it can really get rid of the squeak.

4 way. Liquid soap, wax or sunflower oil
If none of the above is at hand, then use improvised means. Any liquid and viscous agent will do here. But remember that the use of sunflower oil can lead to dust and dirt sticking to the hinges, and this will subsequently lead to rapid wear of the mechanism. And the effect of such treatment will be short-lived.

Here they are - saviors from the creak in the hinges

The creaking of doors is annoying, regardless of whether we are talking about entrance, interior, balcony doors, refrigerators or cabinets. This trouble can be eliminated independently, without resorting to the services of specialists.

As previously mentioned, often the cause of the creaking of door hinges lies in the lack of lubrication. You can fill it with special lubricants, since there are a lot of them in stores.

The following lubricants can be called the most effective.

WD-40 is an all-purpose lubricant available in spray and oil form. It perfectly copes with the task: it provides ease in the movement of elements, cleans the mechanism of dirt and prevents the formation of corrosion.
Solid oil is a high density grease. Very popular for processing any moving mechanisms.
Lithol is a lubricant known for its frost resistance and water-resistant quality. Often used in outdoor applications.
Tsiatim is another effective remedy in the form of a multi-purpose lubricant that will help if the house has a squeaky door.

What else can lubricate the door hinges so that they creak

In addition to special industrial lubricants, other methods for processing loops using improvised household products are also known.

Among them:

vegetable oils;
petrolatum;
wax, paraffin;
pencil lead.

However, it should be noted that these funds are ineffective. Usually, after a few days, the creak comes back again. In addition, edible fats, such as petroleum jelly, attract dust and contaminate the lubricated mechanism, which contributes to the formation of rust.

Features of lubrication of various types of doors

Having decided how to lubricate the door hinges, it remains to do it correctly. The method of performing work is influenced by many factors: material, location, design.

Iron door

Usually begins to “sing”, sagging due to the heavy canvas and corrosion. Iron doors, as a rule, are street entrance doors, mostly they are all-welded non-separable structures. They will have to be processed on the spot without removing. You just need to pick up a strong stop to lift the sash.

First you need to clean the fittings from dirt and rust deposits, and lubricate in those places where the metal rubs - between moving elements.

The leaked residues must be wiped off, and then the door is opened and closed several times to distribute the substance along the internal hinges.

plastic

Mostly indoor, but there are balconies. In the latter case, the sash is first processed from the street, and then from the side of the room.

The open door needs to be lifted slightly with the stop. Apply a small amount of oil and close the canvas.

Important: grease stains are very noticeable on white plastic, which is not visible immediately, but some time after the procedure. Preferably, before “treating” the door, make a test in an inconspicuous place and observe the reaction of the material to the substance.

Wooden

Important: It is better to protect natural wood from contact with chemicals, as deformation may occur or a stain will remain.

glass

This feature does not exclude rattle and creak, does not interfere with lubrication, but it is better to know about it when planning to carry out processing.

Important: oil does not wash off glass, therefore it is recommended to use WD-40.

Accordion door

Easy to understand, but requires a thorough approach:

cleaning the groove and wheels from what stuck during the operation of the door;
lubrication of all moving parts.

But the latter is performed exclusively with a special silicone tool. Only rubbish will not stick to him.

Sliding door

Important: To make the wheels move more easily, silicone grease is applied after cleaning.

How to lubricate?

The final result depends on the technique of applying the lubricant no less than on what means it is carried out. The hinges must be able to be lubricated correctly so that they do not creak. The composition applied to the desired area will help solve the problem efficiently and without hassle. This will help to avoid subsequent contamination of the mechanism and extend its service life. It is worth clarifying certain rules regarding the process of lubricating any door hinges.

The product must be applied using a special oiler, using a nozzle with a thin tube or a medical syringe.
If the loops are disassembled, you can handle them with a thin brush or cotton swab lubricated with grease. A cloth is less convenient for lubrication.
In order not to stain the doors with excess oil, you need to use a dry paper towel.
When the door creaks in a particular place, this area needs more intensive treatment. It is easy to find by external traces of abrasion.
The inside of the hinges needs a more generous oil treatment, as it is the working part mechanism.

To process universal hinges without removing the door, you need to choose the right lubricant and a bottle with a thin nose. If the product is already packaged in this way, you can immediately get down to business. In another case, it is worth carefully pouring the oil composition into a convenient container. The lubricant should easily penetrate dust and cover protective film all working parts of the hinge mechanism.

It is convenient to use the product in the form of a spray. Silicone and lithium greases are no less convenient. The last one is sold in all auto shops and is great for processing anything squeaky and metallic. This method is very convenient for someone who is unable to lift a heavy door leaf. Grease is applied between the hinges, carefully filling the gaps with it.

The second way to lubricate the hinges on the door is more troublesome. Suitable for detachable hinges. You will have to remove the canvas by lifting it with a crowbar. Place it on top of two stable chairs and process as directed. In this position, it is much more convenient to inspect the hinges, especially if you have to disassemble or repair them.

Prepare unnecessary old rags in advance. Be sure to dry and clean to wipe off excess oil and clean dirty areas. They must be cleaned before being treated with a lubricant. Otherwise, all your efforts will be in vain. Abrasive particles with a new portion of lubricant will harm the hinges even more actively. After lubrication, the door leaf must be hung in place.

Causes of creaking at door hinges

There are several reasons why door hinges may creak:

Getting rid of the creak of a plastic door

Doors in rooms today may well be made of plastic. Especially often this material is used for the manufacture of doors that lead from the room to the balcony. This is due to the fact that currently plastic trim on the balcony is fashionable.

And now a problem arises: does the plastic door creak? What to do and how to be? In general, all the means referred to in this article are relevant. However, there are opinions that some oils (spindle, machine, diesel) destroy plastic, and therefore it is better to choose, for example, silicone grease here.

Note that any plastic door is actually quite heavy, so creaking can occur due to such a phenomenon as sagging. To eliminate this shortcoming, it is necessary to adjust the upper loop. And for this you have to remove the decorative fittings. The same will need to be done if the bottom loop is the problem. Of course, it is better if a professional and a specialist takes care of these operations.

If, despite all the efforts and methods, the creak has not disappeared, it means that the fittings have simply served their time and must be replaced with a new one.

Anti-rust spray WD-40

It is made on the basis of white spirit and includes 20%! oils from the total composition. Therefore, it can get rid of the creak only for a short period. Its main purpose is to prepare parts for lubrication (to clean, dehydrate and degrease the surface). Packaged in bottles with a convenient dispenser.

Causes of an unpleasant sound

In order to determine what exactly makes a creaking sound: a door leaf or hinged hinges, you should smoothly and slowly move the door by the handle in different directions, carefully listening to the sounds it makes. Most often, a creak can be issued due to:

Almost all the reasons that cause creaking, except high wear hinges, their factory defects and improper installation, can be easily corrected by simply lubricating the door curtains.

Why doors creak and how to get rid of it

The creak is the result of friction. constituent parts door hinges to each other. Most affordable way elimination of the problem - lubrication of the contact point of moving parts. To do this, you can use the following tools:

grease;
paraffin for candles;
vegetable food (sunflower) oil;
special lubricants in tubes or aerosol cans;
crushed soft graphite rods of simple pencils;
liquid lubricating oils for various parts machines and mechanisms.

Certain types of lubricants have their own application features. Sunflower oil will fit to achieve a quick, but short-term effect, but in long term it can cause corrosion of metal parts.

In order to clean the skin of the hands from grease or machine oil, ordinary soap will not be enough. You will have to resort to special means or detergent compositions for dishes. So, it’s easier to use a syringe for liquid lubricants and a wooden stick for grease.

We clean the oven from fat and soot with improvised means

Why does the door creak

The main causes of creaking doors have long been known.

Hinge corrosion is one of the most common causes of door creaking. Especially, this applies to street entrance structures made of metal. Dampness and adverse weather conditions, over time, can lead to rust of the hinges. That, in turn, gradually destroys iron, impedes the movement of elements and, as a result, leads to a creak.
Insufficient specialty lubricant is another common cause of door squeaks. To make the movement of the canvas easy, it is necessary to additionally lubricate the door hinges. However, over time, the grease tends to thicken. It can also spread or simply dry out. As a result, the appearance of friction between the elements of the loops during movement and a creaking mechanism. Over time, the problem can worsen even more: long mashing of parts can lead to blocking of the mechanism, or even to its breakdown.
Using the wrong lubricant. If the hinges are treated with a lubricant that is not suitable for its intended purpose, then it is likely that its action will not be effective and will not be able to provide the necessary ease of operation of the mechanism. The result is the same outcome as described above.
Part wear. Usually, the loop mechanism serves faithfully for many years. However, over time it can break down. Especially if the rules for the prevention of wear were not observed during operation. In this case, the problem in the operation of the mechanism is eliminated by replacing the mechanism itself.
Clogged hinges are also a not-so-rare cause of squeaking. Dust, rust and other debris - all this can clog the mechanism or absorb lubricant, and, as a result, a creaky door.
The hinges are not equipped with a special ball. When setting the input metal doors or gate, ordinary loops are used, inside of which a ball of the required diameter is placed. The absence of this element may cause a creak. To eliminate it, it is enough to complete the mechanism with the missing part, after removing the door from the hinges, and then install it back.
Structural flaws or mistakes made when installing a doorway are the most time-consuming problem to solve. Usually, the consequences of improper installation appear immediately or make themselves felt from the first days of operation. The most common installation errors that lead to unpleasant consequences are described below:

skewed structure - can occur if the door is very heavy (the outcome of this situation is not only damage to the hinges and a creaky door, but also a loose door frame);
incorrectly or poorly installed hinges;
the contact of the canvas with the skin, door frame and cash.

How to apply the composition

Accessories are different, depending on its type and a specific approach is needed. Start from what exactly managed to creak. The video will guide you through the process.

For detachable hinges or canopies

On one-piece hinges or hinges

On guides

Before processing, mandatory cleaning is required with the separation of all parts of the fittings in stages. Only with the complete absence of debris can special silicone be applied.

To avoid creaking and other noises that the door can make, it is enough to regularly carry out preventive measures, getting rid of debris and lubricating problem areas.

Why do hinges creak?

creak door hinges start for different reasons. It is important to monitor their condition in order to avoid wear in the future. The main problems causing the appearance of a creak are as follows.

Insufficient lubrication. Over time, the lubricant expires. It thickens, spreads or dries out, blocking the normal movement of the door, which has a devastating effect on the mechanism.

Corrosion. The most common cause of creaking hinges on street doors. Blame it all high humidity, which is not tolerated by all metallic elements door structure. If you do not take measures against rust, the movement of the canvas is gradually difficult, and the iron is destroyed.
Part wear. Prolonged or incorrect operation of the door structure and its fittings leads to wear and tear of the mechanism and its breakdown.

Pollution. Dust and small debris often accumulate in the loop space. If nothing is done, the dirt accumulates in the lubricant, gets on the hinge hinges and gradually begins to wear down the metal like an abrasive.
Door tilt. If the door leaf is massive or a mistake was made during the installation of the structure, it may skew. This is not only detrimental to the fittings, but also leads to even greater loosening of the box itself and a change in the contours of the canvas. Usually, the consequences of an unprofessional installation make themselves felt in the very first days of operation of the door structure.

The most common flaws during installation, leading to unpleasant consequences: skew of the mounted structure, incorrect or unstable installation of hinges, friction of the canvas against the sheathing, box or casing. The conclusion suggests itself: the creak of the door indicates that it is necessary to immediately deal with the cause of its appearance.

How to properly lubricate creaking hinges

For different types of doors, different types of hinges are used. Lubrication in each case has its own nuances.

How to oil wooden door hinges

The most popular type for wooden doors are universal loops. They can be collapsible and non-collapsible. In order to perfectly lubricate the door hinges and solve the creaking problem for a long time, it is necessary to remove the door leaf and thoroughly clean all elements of rust. The doors are then put in place. The order of work for a collapsible type of loops:

If you try to perform the operation without removal, you can bend the metal elements. For example, when a rod is pulled out of top design, the force will increase on the lower one, and the entire door can lead to the side.

Non-separable canopies can only be lubricated with liquid material. There is no need to remove the door.

There are also ordinary (detachable) canopies, which are slightly different from hinges with a rod (universal). They are being used less and less. This design is made on the principle of "thorn-groove". The rod is welded directly to one hinge element and inserted into another.

Doors with split door hinges can be removed by simply lifting them up

To lubricate such a canopy, it is not necessary to completely remove the doors. There is a simpler way, but it requires a liquid lubricant. Lubrication is carried out in several steps:

This method is great for lubricating ordinary wooden hinges. interior doors. They always use detachable or universal canopies.

There are also hidden hinges, which are often used for entrance doors. All rubbing elements should be found and carefully treated with a liquid lubricant. Now most models have holes where lubricants must be poured. On different types of construction, they are in different places, so you just need to carefully examine the fastener.

Hidden hinge is not visible when the door is closed

Video: lubrication of different types of hinges

How to lubricate the hinges of a plastic door

Plastic doors have their own distinctive features. PVC material practically does not conduct heat. Also plastic doors very tight to the frame thanks to the seals.

A creak can appear not only because of the hinges, but also because of other fittings (handles, closers, clamping elements).

Most people start lubricating the hinges right away. Other elements of the product are simply ignored. You can’t do this, because the creak may not disappear. It is necessary to pay attention to the accessories.

It should also be lubricated. The work is performed in the following sequence:

If the door still creaks, then the problem may lie in something else, and not in the hinges. In this case, it will have to be reinstalled or replaced completely.

How to grease glass door hinges

Hinges for glass doors have a more accurate and delicate design. Often they are non-separable or difficult to disassemble, so liquid products should be used for lubrication.

Lubrication of the hinge for glass doors usually occurs without dismantling

It is best to use WD-40. It is necessary to pour lubricant into each gap found from a can. Then, check for the presence of a squeak. If it remains, add lubricant and more.

How to grease metal door hinges

Before installation, metal doors are thoroughly lubricated. But over time, the lubricant is produced. When it becomes small, a creak appears.

V winter time solidol can be used. He will not let the loops freeze. But it is better to use a specialized tool - graphite grease.

There are hinges inside which are not a ball, but bearings

Metal door hinges can be treated with lubricant without removal. But this is only if they are not hidden under the overlays. If the overlays are present, you will have to remove the entire structure. They are welded to the door frame and block access to the hinges. Lubrication work is carried out according to the standard principle:

If the hinges of a metal door are heavily rusted, they must first be treated with WD-40. Only after complete cleaning you can start lubrication. In the summer, WD-40 can also be used as a lubricant.

How to oil a folding door

Such a door does not have hinges, but a creak may appear in the wheels or due to a dirty guide. With the guide, everything is simple - you just need to carefully clean it.

It is necessary to lubricate the rollers in a timely manner so that the bearings do not rust.

Wheels will need to be lubricated. For this you need:

The guides should not be lubricated, as the dirt will begin to stick even more.

How to grease the hinges of a double-sided door

There are also double doors. They can open in any direction.

Double-sided doors are very comfortable, but with a strong draft they can start to twitch

Such hinges must be lubricated with machine oil. For this you need:

Often doors with such hinges are installed in public places. Therefore, lubrication must be carried out every 6 months. If a lot of people pass through the door, then preventive lubrication should be done every 3 months.

How to deal with the creak of metal doors?

Modern doors are made from different materials, and in this question it matters.

For metal doors, of course, both machine oil and other indicated compositions will also be effective, but only if the metal product creaks due to friction of the hinge components.

However, the annoying sound may also be due to the fact that the canopies were installed incorrectly during the installation of the door. In this case, especially if the structure is input, the only option is to contact a professional installer. On your own, without special knowledge and skills, it is unlikely that you will be able to fix everything.

Pencil (verified by the editors)

Pour the lead removed from the pencil into the slots of the loops. You can also, without removing the door completely, slightly raise it and place a piece of the rod between the mechanisms. It will crumble itself and be distributed over the hinges after several movements of the door. In order not to open the pencil, you can use spare rods from the Compasses set.

Checked by the editors: for convenience, without breaking off the lead from a sharply sharpened pencil, they placed it in the hinges of a raised door. They returned it to its place, under pressure the rod broke off. After a few "open-close" movements, the door in the room no longer creaks.

Preventive door care

With proper operation and regular preventive maintenance of door fittings, especially locks and hinges, problems with creaking almost never occur. To do this, simply follow:

Lubricate door hinges regularly.
In time, check and tighten the screws that fasten the hinges to the leaf and the door frame.
Try to avoid indoors high level humidity and maintain a certain comfortable temperature.

So that the door creak is never heard in the apartment or country house you just need to be careful with it. At the slightest creak, you just need to take the oiler in your hands and lubricate the hinges.

You can get rid of the creaking of the door if you lubricate the door hinges with one of the following means. Some of them have only a short-term effect, for example, vegetable oil, while others (pencil, polish) have a long-term effect.

Anti-rust spray WD-40

It is made on the basis of white spirit and includes 20% oil from the total composition. Therefore, it can get rid of the creak only for a short period. Its main purpose is to prepare parts for lubrication (to clean, dehydrate and degrease the surface). Packaged in bottles with a convenient dispenser.

Machine oil or for sewing machines

It is applied to the moving parts of the loop with a pipette or injection syringe (two or five). Preference should be given to engine oil with the highest viscosity. It will not only get rid of the creak, but also from the resulting rust on the canopies.

To do this, apply a cloth well soaked in machine oil to rusty places for 3-4 hours. This must be done carefully, not to allow it to spread over the door leaf or jambs.

Pencil (verified by the editors)

Edited by: for convenience, without breaking off the lead from a sharply sharpened pencil, they placed it in the hinges of a raised door. They returned it to its place, under pressure the rod broke off. After a few "open-close" movements, the door in the room no longer creaks.

Sunflower oil

Drip between moving door mechanisms also with a pipette or syringe, or by lifting the door leaf, they wipe the hinges. The disadvantage of this method is the adhesion of dust, a short-lived effect and its frequent use can lead to rapid wear of the mechanism.

Butter, edible fats and petroleum jelly are not used for lubrication because they all cause metal corrosion. The effect of their exposure is very short-lived until they dry.

For instillation of liquid lubricants you can use empty washed bottles of eye drops or for the nose.

Solidol, "Litol" or "Ciatim"

Due to the thick composition, they are applied with a stick, ruler, brush for drawing or with a finger on the loops. Slightly lift the creaking door and apply one of the selected products into the resulting gap.

Solidol cannot be used to lubricate street doors (gates, gates or driveways). Under the influence of low temperatures, it thickens and turns into an abrasive, so it can only be used at home.

Litol is characterized as a water and frost resistant lubricant, but harmful to aluminum surfaces.

Ciatim "(thick lubricant for automotive parts) has antioxidant and frost-resistant properties, is practically not washed out with water, but with a long stay on outdoors the lubricant dries up.

Silicone Grease

Spray it on the hinges or apply a thin layer and close - open the door a couple of times to distribute the product. For more effective action, remove the rod and treat it with grease.

Preventive lubrication of canopies of interior doors once a year will protect against the appearance of a creak.

This might come in handy: even in hard to reach places.

The creak of the door creates psychological discomfort, acts irritatingly. First you need to identify the cause of the creak, in most cases for any door it is enough to lubricate the hinges. Sometimes it is necessary to additionally adjust individual parts of the door connection mechanism. It is not always necessary to dismantle the door leaf in order to lubricate the door hinges without removing the door.

metal hinges front door

Causes of the squeak

The main ones include errors during installation, unbalance of the fastening system, deterioration of the mechanism for hanging the door leaf. In the event that errors were initially made during installation, it is better to invite a specialist and reinstall the door again.
In other cases, you can use simple ways, properly lubricate the hinges with special means to get rid of the squeak.

Before eliminating the defect, it is necessary to open and close the door leaf several times, then it will become clear at what point an unpleasant sound occurs. First, we determine the cause of the creak, it can be:

Lubrication of hinges with vegetable oil

Sometimes housewives lubricate the loops with vegetable oil, but this procedure gives a short-term effect, it is better to use special means. A tool that is not intended for depreciation quickly becomes dirty, loses its properties.

In the event that the door leaf sags, insufficient clearance requires adjustment of the input group.

In other cases, special lubricants are used.

The process of lubricating the hinges with special means

These include:

How to lubricate the hinges of interior doors, the entrance group

Mounted mechanisms are of two types:

detachable, they consist of two halves, one of them is attached to the door, the second to the box;
universal, their parts of the loops are not separated.

The process of lubricating hinges in interior doors

Sequence:

A lever is placed under the canvas to slightly push the gaps between the joints.
To process the loops, a substance, a lubricant is applied to these places.
The lever is removed, the door leaf is rotated somewhat so that the lubricant is distributed over the connecting mechanism.

An example of greasing the hinges in the doors

After that, as a rule, the unpleasant sound disappears. It may be that the creak on the front door appears when the temperature outside is below zero. A similar problem can be solved by choosing a lubricant that is resistant to low temperatures. These include Ciatim (up to -65⁰С), motor oils.

Coping with the squeak of hinges in your home is quite simple, you just need to choose a reliable lubricant.