Best Bath Cleaner: A Ranking of Proven Bathroom Cleaners. Bathroom detergents and cleaners

A well-groomed, clean, tidy bathroom speaks of the hard work, cleanliness of the hostess, since maintaining order in this room takes a lot of time and effort. Plumbing requires the most attention, because proper care guarantees not only an aesthetic appearance, but also trouble-free operation of devices.

The hardest thing to wash is a cast-iron bath, the enamel of which is easily damaged by improperly selected detergents. In this article, we will tell you how to clean cast iron washing containers at home in order to maintain the whiteness and glossy shine of the product for a long time.

Types of pollution

Enamel, which is used to cover cast iron products during the production process, is a powder, it is applied to the surface of the bowl by an electrostatic method, and then baked in a heat chamber. In order to clean, but not damage the cast-iron bath, you need to know what types of contaminants are found on it and with what they can be washed:

Important! The enamel of old cast iron products is quite fragile, so you need to wash and clean such a bath carefully, trying not to damage the coating. To wash the bowl from dirt and preserve the integrity of the enamel layer, it is not recommended to use abrasive and aggressive detergents and hard brushes.

Purification technology

To maintain the whiteness and glossy sheen of a cast iron sanitary ware, it is necessary to wash the product after each use. If there is no serious contamination on the surface of the enamel, then it is not necessary to clean it, just rinse it thoroughly with warm water and dry it. Once or twice a week, a deeper cleaning is performed:

Note! If you wash a cast iron bath with abrasive and acid-containing products, clean with hard brushes and sponges, the enamel will become covered with microcracks, and then begin to collapse. Restoring the enamel coating at home is quite difficult, so you need to clean the plumbing fixture from this material with an ordinary soapy solution.

Operating rules

To make washing and cleaning a cast iron bath easier, you must follow the instructions for using this plumbing fixture. If you follow the manufacturer's recommendations for using the product, as well as regularly clean it with approved products, the enamel will last more than 15 years, retaining its shine and whiteness. To extend the life of the bath, you must follow the following rules:

Please note that at home it is quite difficult to clean old enamel to perfect whiteness. Sometimes, in order to restore the original appearance of the product, staining or re-enamelling is required. This operation is performed after careful preparation of the surface using epoxy enamel or liquid acrylic.

Video instruction

The bathroom is a place where a person spends a lot of time. It can be problematic to care for this room, because it is a place where bacteria accumulate due to humidity. Many people do not pay due attention to cleaning their homes and use those bathroom cleaners that they first came across in a household chemicals store. Not everyone thinks about whether a cleaning agent is suitable for a specific coating of products that are located in this room.

Popular manufacturers of household chemicals

Now on the shelves of shops you can find a large number of household chemicals of both domestic and foreign manufacturers. All of them try to use in their means only innovative technologies. Cleaning products vary in price. You can buy an inexpensive product or a more expensive professional product.

Despite the wide assortment presented in stores, it can be difficult to decide which cleaning agent to give preference to. Funds are different forms release:

• Spray.
• Paste.
• Powder.
• Gel.

Often sellers use the confusion of the buyer for their own purposes, and offer to purchase what is beneficial to them, and not products that satisfy the goals of the consumer. In order not to get confused in a huge assortment, you need to know which bathroom cleaners are the best. Now very popular buyers of the following manufacturers of cleaning products:

• Frosch.
• Bass.
• Bagi.
• Oricont.
• comet.

Some of the brands presented in the rating are unfamiliar to the consumer, and therefore may cause concern. In fact, these firms have been around for a long time and are gaining the trust of an increasing number of buyers. This is due to the high efficiency and quality of the products.

Cleaning cast iron baths

Its effectiveness in the fight with various impurities on cast iron baths, the following popular products have been confirmed:

• CIF Crem.
• Comet gel.

These products meet the basic requirements for household chemicals used for cast iron bathtubs with enamel. They qualitatively clean even complex contaminants and do not contain substances that can damage the coating.

Delicate and effective Cif cream

This cleaner allows you to achieve quick results when cleaning cast iron bathtubs. It works quickly, efficiently and gently. In addition to the bath, it can be used for cleaning tiles, faucets and other surfaces in the shower room. The cleaner for enameled bathtubs and cast iron tubs contains special microgranules surrounded by bubbles. Benefits of the tool:

• Strong pollution is quickly removed due to their dissolution.
• There is no damage to the enamel, which is usually covered with cast-iron bathtubs.
• If the product is used regularly, the surface will shine white without a yellow coating.

The delicacy of the effect and the power of the cleansing cream are known among consumers, who very often prefer it. To clean the bathroom, the product must be applied to the bottom and sides of the product and left for 5 minutes. The surface should then be rinsed with plenty of water. . The Cif product handles the following issues:

• Rust.
• Plaque.
• Stubborn stains.

All available contaminants are removed with Cif Crem. The product does not damage the surface of products, has a pleasant smell, reduces cleaning time, perfectly copes with all dirt and is easy to apply due to its creamy consistency. The disadvantages of the product include a small volume of the bottle - only 500 ml.

Comet gel against bacteria

Cast iron bath detergent does the job perfectly. Cleaners in the form of a gel or cream are especially recommended for delicate enamel. Comet Gel is an excellent choice for cleaning the bath of impurities. This product is advertised a lot on TV, but in this case the product is not a marketing gimmick and actually works well. The unusual formula consists of a cleaning base, the elements of which can cope with all kinds of stains, limescale, old smudges and many other dirt.

After applying the product to the surface of the bath, it must be kept for 10 minutes so that it dissolves the dirt well. The product is then rinsed off immediately clean water. If there is a need, then in places of accumulation of pollution, you can walk with a sponge on which Comet is applied. The product contains disinfectant additives, unique polymers and mineral acids, which are the last to work. They form protective film, which repels dirt from the surface of the bath. Thanks to this, the product remains clean for a long time. Comets have a lot of advantages:

The downside is the smell which may not be to everyone's liking.

Acrylic bath products

Among the wide variety of products used to clean acrylic bathtubs, the best way The following manufacturers have proven themselves:

• Bass.
• Acrylan.
• Frosch.

The surface of acrylic bathtubs is very capricious and requires special care. She is afraid of exposure to aggressive acids or rough abrasives in cleaning compositions. The products described here are absolutely safe for this type of bath.

Bass for delicate materials

Bass is considered one of the best bathroom cleaners. The tool is specially designed for the care of products made of "delicate" materials. The detergent product is excellent for quick surface cleaning or for stubborn stains, plaque or stubborn dirt.

The consistency of the product is thick, so it slowly flows from the surface of the product. The composition acts very gently, without damaging the acrylic layer. For a more effective result, the product must be spread over the entire surface of the bath with a soft sponge or cloth. The gel should be left for 15 minutes, then wipe the surface with a sponge, and only after that the product should be washed off with a sufficient amount of water. To achieve a more lasting result, you can use an acrylic bath polish. The product fixes the effect and gives the product a sparkling look. In addition to the bathroom, Bass can also be used to clean showers. Product advantages:

• The acrylic layer is not damaged.
• The composition does not contain coarse abrasives and aggressive acids.
• Due to the thick consistency of the product, vertical surfaces can be washed.
• Perfectly copes even with old and stubborn dirt.

There are no drawbacks to the Bass detergent.

Acrylan with citric acid

This is a cleaning agent from the manufacturer Bagi. The product is a foam that gently and thoroughly removes dirt from product surfaces. Acrylan perfectly copes with dirt, plaque, rust, stubborn stains, as well as fungus and mold. Apart from acrylic bath, the product can be used to clean enamel, ceramics, tiles and glass. When the cleaning work is done, the product leaves a protective film that prevents the accumulation of dirt and plaque for several days.

The manufacturer of Acrylan warns that the product can only be used in protective gloves so as not to damage the skin of the hands. The product is applied to the surface of the item to be cleaned, then it is necessary to wait a few minutes for the Acrylane to work, after which it is necessary to wash off the agent with a large amount of warm water. The composition of the product includes surfactants and citric acid, which together have a disinfecting and cleansing effect.

The product must not be left on the surface of the acrylic bath until completely dry or mixed with other household chemicals. Advantages of the tool:

• Acceptable cost per package.
• Can be applied to different surfaces.
• Convenient and fast to work with the product.
• The composition does not contain coarse abrasive components that damage the acrylic layer.
• The foam has an airy texture.
• Copes with all types of pollution.

Acrylan has little to no downsides, but many people may not like the strong chemical smell.

Luxus Professional: professional care

The enameled surface is very capricious, so it needs to be carefully looked after. This cleaning product from the manufacturer Oricont has received numerous awards for its high cleaning power and quality. It perfectly copes with pollution on the bathtub, faucets, tiles, mirrors, glass and plastic products. The special formula of the cleaning composition removes well limescale, rust, soap stains, and also fights harmful microorganisms. When using Luxus Professional, the bathtub and other products are not mechanically damaged.

The tool is available in the form of a convenient spray bottle. The composition is sprayed on the surface of the product and cleans from dirt. The agent must be removed after 15 minutes, and you can enjoy the radiant whiteness and purity of the bath. The product washes off easily with water and leaves no streaks behind. If the product has stubborn stains, then the contaminated area must be additionally worked out with a soft sponge. Oricont's products can be applied to acrylic products. Advantages of the tool:

• Acceptable cost for a bottle of 500 ml.
• It gives the bath and other products a white and well-groomed appearance.
• After using the product, a protective film remains.
• Can be used on acrylic surfaces.
• The composition does not contain aggressive acids that damage the bath.

The disadvantages include a strong and not very pleasant smell.

Hypoallergenic Frosch

This product is an alternative to conventional chemical compounds. It is made from a biodegradable base. Frosch contains grape acid, which allows people suffering from allergies to use the product. And also the product will appeal to consumers who can not stand the pungent smell. The product effectively cleans enameled surfaces without damaging them. It is convenient to spray the product from a spray bottle with a child-proof lock.

The working time of the composition depends on the depth of contamination. If it is necessary to carry out preventive cleaning of the surface, then the agent can be sprayed for 10 minutes, after which the product must be washed off with running water. If general cleaning is carried out, then the composition should be left for 20 minutes, and then the contaminated area should be worked out with a soft sponge or brush. Frosch does not contain additives harmful to humans, such as phosphates and formaldehydes. Advantages:

The disadvantages include the mandatory use of the product in protective gloves.

Criteria for choosing a cleaning agent

One of the leading products is Cif Crem. Many consumers note its high efficiency. It is a versatile product because it washes away dirt from many surfaces, including cast iron bathtubs. Sif does a great job. various pollution, and at the same time has budget cost. Therefore, a cleaning cream can be advised to all buyers.

Comet Gel Recognized best product for cleaning cast iron bathtubs. It gets rid of plaque, rust, stains, dirt, as well as germs and bacteria. The product gives a festive whiteness and protects against the appearance of new pollution.

Bass Gel does not include strong chemical acids, so it is good helper in the fight against stains, plaque and rust on an acrylic bath. The bass penetrates deep into impurities, breaks them down and removes them without residue.

Acrylan is a versatile cleaning product. It is able to clean almost any surface from stubborn dirt, while it disinfects and removes mold and fungus. Convenient packaging with a spray bottle allows you to choose 2 spray modes: foam or liquid.

Supporters of sustainable products will appreciate Frosch, which has a pleasant smell and does not allergic.

Attention, only TODAY!

How nice it is when the bath shines with whiteness and freshness. Do you know what is the best way to clean a bath? chemicals or folk? What tools are best for enamelled bath, and which for acrylic. How to remove rust and limescale? How to make a bathtub perfectly white? Today you will learn how to clean the bath. There are rules here.

Rule One

I recommend washing the bathtub after each visit. Just rinse it with clean warm water and dry it with a cloth (you can use a terry or linen towel). This will be useful for any bath and enameled and acrylic. Do not forget to do it yourself and teach the household.

Rule Two

You need to clean the bath as it gets dirty, preferably once a week. This rule is suitable for enamelled baths. Acrylic bathtubs are cleaned less frequently - once every two weeks.

To clean the bathtub, apply a suitable cleaning agent to its surface, leave it for 15-20 minutes (or as directed in the instructions), then rinse with a sponge or cloth and rinse with warm, clean shower water.

Rule Three

Different baths - different cleaning products.

Products containing baking soda are ideal for an enameled bath. Such as "Pemolux", "Comet".

For an acrylic bath, it is better to use special liquid and gel-like products. For example, "Sun Klin", "Mr. Chister", "Pani Vanna", "Triton", "Arlilan - steal".

Rule Four

Do not use for cleaning enamelled baths:

• fiberglass sponges and metal brushes. Otherwise, scratches and indelible gray streaks will appear;
• products containing hydrochloric, oxalic acid, alkalis, formaldehydes. They corrode the enamel, which then cannot be restored;
• toilet bowl cleaners, they include aggressive acids that destroy the enamel.

Rule Five

To clean acrylic bathtubs, do not use:

• abrasive pastes, washing powders. They can easily scratch the surface of the baths;
• emulsions containing alcohol;
• gasoline and acetone, ammonia, chlorine-containing preparations. They corrode the acrylic.

What to use to remove rust?

To remove rust, you can use special products sold in stores (now there is a wide variety of them). However, they should not be used constantly, otherwise the thin enamel will collapse.

Proven folk remedies are great for removing rust on an enamel bath.

• Take regular baking soda, rub it on the rusty spots on the tub, leave it on the dirty tub surface for 10 minutes, then rinse with water.
• Prepare a mixture of borax and vinegar, apply it to a cloth, and rub the mixture on the rust stain until it disappears.
• Rub the yellow rust stains on the tub with a mixture of warmed vinegar and they will disappear.
• A thick slurry of the mixture and turpentine will help to cope with rust stains.

How to remove limescale?

Limescale from an enamel bath can be removed with improvised means.

• Ammonia. Simply dissolve it in water and apply to the surface of the bath for 10 minutes, then rinse with warm water.
• Lemon juice. Apply it on the walls of the bath and wash it off after 8-10 minutes.
• Vinegar with Apply the mixture to the limescale and wipe. The flight will go away.

An acrylic bathtub can be cleaned using a solution of citric acid or vinegar.

Pour into the bath warm water(20-25 degrees) so that it covers the limescale with a layer of at least 5 centimeters. Then add 1.5 liters of vinegar or 7% solution to the water citric acid. Mix everything thoroughly using improvised means (tongs for boiling clothes, a scoop for water, a stream from the shower) and leave for 12 hours. Then drain the water, rinse the bath from the shower and wipe.

How to make a bathtub perfectly white?

If the bath is new, then shine and whiteness can be restored in this way: cover the bath with paper towels soaked in vinegar and leave for several hours. Then rinse the bath.

If the bathroom is not quite new, then the following method will do.

Apply a mixture of drinking and soda ash (in a ratio of 1: 1) to a wet bath for 5-10 minutes. On this layer, apply a mixture of 50 g of bleach and 50 g of vinegar. After half an hour, wash everything off with plenty of water. The result is a white bath.

Today I told you how to clean the bath. And what means and methods do you use, please share. I'll be happy.

Rust spots, plaque and sediment that were not removed in due time are a reason for doubting the cleanliness of the house. How to clean the bath until white, while maintaining the result? Which means are the most effective and least safe, and which are the opposite?

The surface of the tub can be cleaned with a sponge and detergent (dishwashing detergent or laundry soap).

Choice of cleaning products

Shelves of the housekeeping departments in supermarkets abound with bath cleaners. There are more than a dozen of their names. But without knowing the rules for their use, you can choose a tool that will not have an effect or, on the contrary, will have a very strong effect, corroding the enamel.

To remove stubborn stains from the surface of an acrylic bath, use acrylic bath cleaners: Triton, Mr. Chister and Sun Clean.

Despite the fact that the bath has not met with the brush for so long that the enamel has darkened over time, the situation cannot be corrected with the usual means. The best solution would be to choose a high performance, acidic cleaner in the form of any liquid composition or gel. But for plumbing that is kept in proper cleanliness, it is better to purchase a mild product and with a not so “lethal” effect.

Before you clean the bath, you should remember that, making great efforts when washing, it is important not to overdo it with them.

When rust cleaning is required on an enameled product, do not stock up on too strong a product and do not keep it on the coating for a long time. For example, "Sanox" has an instant effect, removing all rust deposits. But at the same time, the enamel on the surface is gradually washed off, exposing the unsightly sheen of the metal.

It makes sense to be patient and thoroughly scrub the surface than to overpay for enamel restoration or reinstallation of a new product later.

Do not forget about safety. Especially for those housewives who have children, allergies and just households with a sensitive skin type.

Rinse off the cleaning composition from the surface carefully, using a soft sponge or rags, without saving water on the secondary rinse.

Back to index

List of chemicals

The most effective and gentle coating means are:

To clean the bath, detergents such as Cif, Acrylan, Sarma and Cillit Bang are used.

1. Cif - Ultra White gel composition is preferred.
2. Cilit Bang - applicable for regular use, on complex spots(rust, lime deposits) may not be effective.
3. Comet gel is universal, applicable for various plumbing fixtures and kitchen surfaces. Helps to overcome strong pollution. For baths, the series "7 Days of Purity" is effective.
4. "Pemolux" - better option to clean the enameled bath, and do not.
5. Domestos in liquid or gel form is suitable for frequent care, can master spots of medium complexity (not very neglected). Minus - sharply gives chlorine, which is part of it.
6. "Triton", "Mr. Chister", "San Klin" - for cleaning hydromassage acrylic bathtubs. They do not contain strong substances, including acids, therefore they are ideal for processing fragile acrylic.

All of these products are certified, have passed laboratory tests and tests in dermatology. And despite this, the exercise of caution in handling them does not hurt.

Back to index

Folk methods

It happens that it is a pity to spend money on the purchase of a good cleaning composition, or its use is unacceptable due to the poor health of someone close to you. How in that case? Folk methods will help out.

Back to index

Baking soda

To clean the bath to perfect condition, baking soda, along with soda ash, will help. This option is budget, but one hundred percent effective.

Mix calcined with baking soda(ratio 1:1). The mixture is evenly distributed over the surface of the device. Wait 7-10 minutes and proceed to the next step: a solution of vinegar and bleach is applied to the soda in the same ratio. For a regular bath, a small bag of bleach powder is enough.

After 40 minutes, all layers are thoroughly washed off. Plumbing that gets cleaned by this method with soda, shines with a new brilliance.

Aesthetics of a cast-iron bathtub is given by snow-white enamel, which must be looked after and applied means that do not damage it. Cast iron bathtubs- This is one of the most popular types of fonts.

Such demand for cast iron is associated with the durability and strength of the metal, its heat capacity and resistance to temperature fluctuations.

Thanks to enamel, the bowl is distinguished by snow-whiteness and shine, which does not go away over the years with proper use.

When bathing, there is not much noise from the impact of the jet on the bowl, the bath practically does not absorb dirt.

Like any plumbing, it requires careful and regular maintenance, which helps to maintain the original color and luster of the enamel.

Why does the bath get dirty?

Limescale is formed due to the content in water:

• salts;
• minerals;
• calcium;
• magnesium.

Many install filters on the risers to soften the water - and this serves as a prevention of lime stains.

If the mesh is missing, grayish stains appear on the surface of the bowl, which are difficult to wash with ordinary powder.

Required for care special agent destroying the structure of lime deposits.

The main problem of cast iron baths is enamel, to which zirconium substances are added for heat resistance, strength and elasticity.

But they are completely incapable of resisting rust. Because of this, the bowl is quickly covered with micro-scratches, cracks through which corrosion can affect the metal.

Modern technological process wall treatment involves the use of titanium salts, making the bowl more resistant to wear and smooth.

Rust forms on the walls and bottom due to the precipitation of iron salts. Usually such pollution occurs due to old water pipes.

These are dangerous streaks that gradually corrode the enamel, corrosion can reach the metal. To prevent this, it is necessary to clean the bathtub at the first sign of rust.

Another type of pollution is fat. Fat deposits are a product of the excretion of the human body. At water procedures household dirt and exfoliated scales are washed off the skin.

If you do not wash the bath regularly, such plaque turns into dense layers that are difficult to clean.

How to clean a cast iron bath?

During prolonged use, dirt accumulates, the enamel acquires an unpleasant gray or yellowish tint, and obvious streaks become visible on the surface.

If the bath is in a neglected state, it is difficult, and sometimes impossible, to wash it.

Due to improper care, the font becomes rough, dirt is absorbed into the micropores, only special solutions can cope with it.

There are many for sale effective means who help.

At the same time, preparations for acrylic equipment are not suitable for enamel, so before buying, you need to study the composition, and then follow the instructions when washing.

Household chemicals

Trace elements and reagents, as components of cleaning products, successfully cope with almost all layers.

An overview of the most popular solutions will help you choose the right preparation for both old and new baths.

White

This tool is suitable for returning enamel to its original color. It will not cope with rust and lime deposits, it is better to wash surfaces with minor streaks.

Whiteness removes fat deposits, shallow stains left over from dyes.

The solution belongs to disinfectants, eliminates most of the bacteria.

• enamel;
• tiles;
• joints;
• corners over the bowl.

The composition removes mold and fungi, especially in areas where water is drained. You need to wash the bath with a hard sponge, without metal fibers. Whiteness is best diluted with water in a ratio of 1: 2.

Mister Muscle

This product is suitable for disinfection and care even for damaged surfaces.

It can clean:

• soap scum;
• layers of dirt;
• lime deposits.

The composition penetrates deep into the structure of stains, destroys them, is able to eliminate all types of microbes.

The plastic container with a spray gun is convenient to use, the improved shape of the spray gun allows you to adjust the jet that penetrates into hard-to-reach places.

There are two modes of operation of the canister:

1. Application over a large area is achieved due to the wide holes in the nozzle of the spray gun.
2. To flush narrow gaps, the tip is brought to the point spray position. After that, the surface is wiped with a sponge, washed off with water. If necessary, you need to clean the bathtub two or three times.

Creamy paste has a formula thanks to which chemicals penetrate into the deep layers of dirt, break them down from the inside. The composition does not contain abrasive substances, so it is absolutely safe for enamel.

cif

The cream easily copes with grease and lime, but is not able to remove old rust. For such stains, there is a special Ultra White formula with enhanced whitening composition.

To clean the surface, it is enough to apply a thin film of the drug for 1-15 minutes, then wipe and rinse with water.

Active substances during this time instantly penetrate into the deposits, damage the cells. As a result, the drip, which was difficult to eliminate, turns into a liquid flowing down from the walls.

All creams and solutions of CIF are available with various fragrances:

• lemon;
• pink;
• coniferous;
• nautical.

Gels are safe for humans, do not negative impact on the skin and mucous membranes. The main advantage is an affordable price and a choice for bathtubs made from various materials, including pastes suitable for cleaning enamel.

comet

A product that can be used to clean any surface. It is used for cleaning in the bathroom and in the kitchen. Available in powder and gel form. Last option packaged in plastic containers with dispenser.

The mixture has a slight bleaching effect, well disinfects plumbing, tiles, stoves. The composition contains a chloride substance that corrodes fat.

Due to the fact that the manufacturer replaced the silicate abrasive with chalk, you can clean the font without fear of damaging the coating.

It should be noted that the product contains a number of acids, so it must be used with caution. When applying, it is not recommended to leave the gel for a long time.

10 minutes is enough to wash the rust stains, after which the bowl is rinsed with plenty of running water.

Sanoks

Cream made Russian manufacturer household chemicals. Due to the high concentration of active substances, the mixture copes with complex contaminants, allows you to effectively clean old streaks and stains.

The improved formula is designed to combat 99% of harmful microorganisms, corrosion of fat, lime deposits, rust.

The composition includes oxalic acid, so the product is not used for a thin layer of enamel. It is better to pre-test on an inconspicuous area of ​​\u200b\u200bthe bowl.

The test will show whether it is possible to wash a certain coating, how long the paste needs to be kept.

The gel has the ability to eliminate unpleasant odors, after its application in the room, a slight aroma remains for a long time.

home remedies

Some people don't use household chemicals to wash the bath. They think it's up to renewal appearance bowls there is no need to buy professional formulations.

Indeed, cleaning can be carried out with components that are always at hand.

Here popular and effective recipes:

1. To remove rust, take hydrogen peroxide and ammonia in equal proportions. The mixture is applied only to damaged areas, and then washed off with water. If necessary, the procedure is repeated 2-3 times.
2. With old yellow spots, a combination of vinegar and salt, which are combined into a mass in equal amounts. Rusty streaks, places near faucets and taps are smeared with paste. It can be left for several hours. Natural ingredients are not able to damage the coating.
3. Turpentine can clean lime deposits. The substance is mixed with soda and salt until a homogeneous mass is formed. The streaks are treated with gruel, give 2 hours for the reaction, after which the softened dirt is removed with a sponge, washed with water.

Acids are not used for enamel, with the exception of oxalic acid, which needs to be cleaned of stains that are not amenable to other means.

It is diluted with water to a semi-liquid state, the layers are lubricated. After an hour and a half, you should lightly walk with a soft sponge, rinse thoroughly.

In order not to have to restore the font, it is necessary stick to certain rules:

1. Despite the heat-resistant coating, do not draw too much into the bowl. hot water, the optimum temperature is up to 750C.
2. If you clean the equipment with brushes with metal fibers, cracks instantly form on it.
3. Whiteness is used only in a diluted form so that it does not damage the enamel.
4. Washing with caustic acids is possible in extreme cases; it is not recommended to leave it for a long time.
5. Do not put metal objects in the container.
6. If you clean the bath immediately after the hygiene procedure, the risk of deposits will be significantly reduced.

Enameled cast iron bathtubs require special care. Lost during use White color, yellowness, rust often appears,.

To get rid of unpleasant stains, use household chemicals designed for such equipment.