Do-it-yourself suspended ceiling made of plastic. Do-it-yourself plastic ceiling: preparation and installation

23.06.2020

With the advent of inexpensive building plastic, it has become much easier to repair the ceiling, and presentable has been added to cost reduction and easy installation. appearance designs. Indeed, practical glossy panels in the bathroom or kitchen look elegant and quite appropriate, and their design is not inferior to the design of plasterboard and tension systems. Thanks to a wide range of ready-made building materials, you can make a plastic suspended ceiling with your own hands, while the result will practically not differ from the work of professional craftsmen.

Why plastic is better than other materials

The first question that arises at the mention of plastic false ceilings concerns their safety for people or animals. Modern artificial PVC panels are absolutely harmless. PVC modifications are used not only for the production of building materials, but also for the manufacture of dishes, food packaging, and souvenirs.

At the same time, plastic, unlike wood, is light in weight, and for a ceiling device this is an important factor. In addition, PVC parts have a smooth, non-porous texture, while the natural material - wood - changes shape and weight with changes in temperature or humidity in the air. confined space.

Plastic is great for finishing ceilings in modern kitchens

One of the important advantages for utility rooms and bathrooms is practicality. Reiki and panels do not need to be updated with paint, it is enough to wipe it several times a year with a cloth slightly dampened with water. Stronger contaminants are removed by traditional detergents- Laundry soap or cleaning gel. Abrasive powders are not recommended, as they can scratch smooth surface, it is especially easy to spoil the look of mirror and glossy elements.

The ease of installation of the PVC panel structure is also one of the advantages of this material. Even without special training, you can design and create a frame from a metal profile or wooden slats, and then attach plastic parts to it. Anyone who knows how to use a screwdriver or drill will succeed.

Do not forget that the plastic false ceiling perfectly masks communications: ventilation pipes and electrical wiring. PVC panels also perfectly hide heat-insulating mats. In the event of flooding from above, even repairs will not be required, although, suppose the drywall becomes unusable, and the tension structure has to be restored. As you can see, plastic ceilings have enough advantages.

A sample of the ceiling from textured fragments plastic panels: thanks to segments of various lengths, an interesting pattern is formed

Choice of plastic panels

Consumable plastic can be divided into two categories - wide panels, most often glossy or matte, and narrow slats, resembling a wooden "lining" in size. The assembly principle for both types is the same: the parts are folded in parallel end-to-end, one by one, over the area of the entire ceiling. It is not necessary to place elements along or across the walls, some hobbyists stack them diagonally, although this method is a little more difficult to perform.

Given the interior of the room, you can choose colored panels - most often they are painted in pastel, pale colors. There are options with a pattern, but they should be used with extreme caution, while the ornament on plastic should be combined in style with wallpaper, tiles and furnishings.

After choosing the color and size of the parts, you need to calculate their number. The dimensions of the panels are indicated on the labels, therefore, knowing the total area of the room, it is easy to calculate the number of pieces: we divide the area of \u200b\u200bthe room by the area of one part. 1-2 additional elements will not interfere, since some of the panels have to be cut.

Samples of panels with drawings of natural themes

When buying, pay attention to the following nuances:

the same color of the elements of the entire batch;
integrity of cardboard or film packaging;
No scratches or chips on the plastic.

Pay special attention to the thickness of the panels. As a rule, ceiling specimens are slightly thinner than wall ones, their average thickness is 8-10 mm, the most reliable ones are 12.5 mm.

In addition to traditional panels white color widely used colored plastic

What materials and tools will be required

In addition to plastic panels for suspended ceilings you will need a number of materials for the frame and a set of tools:

starting (bearing) profile;
connecting H-profile;
corner (end) F-profile;
ceiling plinth;
corners (external and internal).

In the process of drafting a project, it is necessary to draw a layout of the panels and calculate how much it will take approximately consumable. Do not forget about lamps, wires and fasteners - dowels and screws.

A standard set of tools is most likely to be found on the farm, the rest will have to be purchased: a drill, a screwdriver, a hacksaw or a circular saw, carpentry knife.

Mirror panels visually increase the height of the ceiling in the bathroom

Installation instructions for plastic ceiling

The proposed phased plan is the basis for the construction of a plastic false ceiling the simplest design. It is suitable for decorating a kitchen, bathroom or hallway of a rectangular or square shape. The instructions can be supplemented or slightly modified, if required. design solution.

Surface preparation and marking

Preparatory work consists in removing everything superfluous from the ceiling surface - old paint, fragments of plaster. If there is big cracks, they need to be puttied. Concrete plates in rooms with high level humidity should be treated with a composition against mold and fungus.

Then, using a level and a tape measure, you need to make a markup for the guide profile. The distance from the ceiling surface to the starting level is at least 10 cm, and preferably 12-15. The height of the ceilings will noticeably decrease, for this reason it is not recommended to arrange suspended structures in a typical panel and brick housing with a ceiling height of 2 m 50 cm.

Ready-made frame from the guide and ceiling profile in the bathroom

Installing a box from a profile

Properly mounted profile frame is a guarantee of long service life and reliability of the suspended structure. The procedure for installing a metal profile box (a crate made of wooden slats is attached according to the same principle):

We drill holes for dowels in the walls and fix the guide profile.
We connect the parts together with special fasteners - "bugs".
We attach suspensions to the ceiling - in a straight line, at intervals of 50-55 cm.
We mount a ceiling profile to the suspensions, on which plastic panels will be attached.

If necessary, if the room has a length of more than 4 meters, we build up the profile in segments using longitudinal connectors or simply fasten it with self-tapping screws.

Fastening plastic panels with pre-installed spotlights

Installation of plastic panels

The final step, which should be done slowly and very carefully. We release each part from the film and cut off the excess part, if necessary, using a grinder. You can work with a hacksaw or a jigsaw, but the process in this case will be delayed. The length of each panel should be 4-5 mm shorter than the length of the room. Sand the edges and fasten with screws to the profile.

From the following panels, folded back to back, we assemble a smooth canvas. For glossy parts, the seams will be barely noticeable, for elements with a pattern, they will show through more clearly. Small grooves will remain between the thin slats. We cut off the last part according to the width of the remaining space.

Standard scheme for laying plastic panels

We cut out holes for the lamps with a knife, the wiring to them was laid even during the installation of the frame. Spotlights come in a variety of sizes and designs, so it won't be hard to find the right spotlight for your type of ceiling. We cover the edges of the plastic sheet with a frieze or corner.

The result of your efforts will be a beautifully designed suspended structure that masks all the flaws of the old ceiling.

Video selection: installation of a ceiling made of plastic panels

Improving the appearance of the ceiling is simple. With all the variety of modern finishing materials There are many ways to change the interior of a room. One of them is the installation of a ceiling made of pvc panels. It is not surprising that the question of how to make a suspended ceiling from plastic panels with your own hands is heard more and more often.

This type of finish immediately gives the room unusual view and it can be attributed to the class "Euro-repair", with relatively small cash costs and without loss of quality of work.

Benefits of using plastic products

Those who installed a suspended ceiling made of PVC panels on their own note such distinctive features how:

Durability;
Good plasticity and sound insulation;
Protection against fading in the sun and moisture;
Easy to clean;
Environmentally friendly;
Effectively hides uneven ceilings;
Allows you to discreetly place electrical wiring under light elements.

Cons of PVC ceilings

Despite the fact that PVC panels, which finish the suspended ceiling, resist high temperatures well (up to 400 ° C), they, like all plastic materials, may burn. And when ignited, toxic gas is released. Therefore, for safety reasons, you should limit the power of pendant and built-in luminaires in suspended structures, as well as avoid places with open sources of fire.
The material itself, from which the cladding panels are made, is plastic, which cannot withstand mechanical stress, such as hitting with a hammer. After that, the panels simply crack and lose their appearance.
If direct sunlight falls on the ceiling, which is planned to be finished with plastic elements, it is recommended that this venture should be abandoned. Under the influence of direct sunlight, plastic panels fade and acquire an unpleasant yellow tint. And the colored elements just fade in the sun over time.
Some homeowners refuse to finish the ceilings with PVC panels due to the fact that the premises take on a non-residential office look. But this can rather be attributed to the category of psychological perception. And here is a matter of taste.

We calculate the necessary material

Before starting work, during which the ceiling of PVC panels will be mounted, you need to know how much and what material may be needed during work.

PVC panels

In order to correctly purchase the right amount of material, you need to know them dimensions. As a rule, they are indicated on the packaging. Panels are available:

Thickness - from 5 to 10 mm,

Width - 25 - 30 cm,

The length of the canvas is 2.7 - 3 meters.

When calculating the number of PVC panels, the surface area of the ceiling must be divided by the area of one panel (it is written on the package). 10-15% is added for unforeseen expenses, after which you can purchase material for lining the ceiling.

Metallic profile

It is more difficult to determine the number of profiles for the installation of a false ceiling.

It is best to take a sheet of paper and reflect a large-scale copy of the ceiling on it. Parallel corners are drawn on the sheet in increments of 60 cm. The required profile volume for the entire room is calculated. It is also necessary to take into account the need for more rigid profiles that are mounted around the entire perimeter of the ceiling. Similarly, the number of screws and dowels is calculated.

Ceiling plinth

They are framed by the entire ceiling around the entire perimeter of the room. Knowing the perimeter, it is necessary to divide by 3 (the length of one segment). We get the required number of plinth strips. Do not forget about unforeseen expenses of 10-15%.

Required tool

In progress self-finishing PVC ceiling panels, you can not do without the following tools:

screwdriver or low-speed drill;
bubble 2-meter level;
miter box;
hacksaw;
metal scissors;
"liquid Nails";
rag.

Be sure to have plastic dowels and screws for them to fasten the mounting elements. A frame is assembled with a screwdriver. PVC panels can be directly fastened to the frame itself either with screws with a press washer, or with metal clips designed for this type of fastening work.

Ceiling preparation

Before the beginning installation work, it is necessary to prepare the surface of the ceiling. Everything that crumbles or falls off the surface (plaster, old whitewash, etc.) is carefully cleaned. Then the surface of the ceiling is recommended to be primed.

After preparatory work, start marking the frame around the perimeter. A solid line is marked with a pencil around the room on the walls. It will serve as a guide for the installation of suspended elements.

This distance must take into account the space under concealed wiring room lighting elements - at least 2 cm. The lowest place is selected on the surface of the ceiling and a line is drawn along the walls at a 2-meter level. Also, all lines are transferred to other walls according to the level. The laser level is optimal for this stage of work.

Important! The estimated level of the suspended ceiling can be drawn with a string of twine, liberally smeared with chalk.

Then they begin marking the supporting structures of the frame. They are located perpendicular to the PVC panels (60 cm apart).

Types of crates

1st type: plastic crate

The material for the manufacture of a U-shaped profile or plinth is high-quality plastic. After the lower border is drawn on the walls, it is attached to the walls along this line. When mounting in the corners, use a hacksaw.

The profile is fixed every 25-30 cm.

2nd type: frame made of wooden beams

Used as a frame wooden beam. With dowels and impact screws, the beam is attached to the ceiling every 60 cm. To level it in one level, wooden linings are used between the beam and the ceiling.

3rd type: frame made of metal elements

The most common type of crate for false ceilings. U-shaped metal components are mounted to the floor surface every 60-80 cm using anchors that are able to take heavy loads on suspended structures.

In places where heavy elements are supposed to be fastened (such as a chandelier), additional jumpers are installed between the supporting elements of the frame.

Phased installation of the frame

We are approaching the description of the phased installation of a suspended ceiling made of PVC panels.

1st stage

Places for attaching profiles are marked on the walls. In order for the false ceiling line to be horizontal, a level is used. Then, a profile is installed along the perimeter of the ceiling, so that there are no cracks and gaps between the wall and the profile.

2nd stage

Installation of transverse profiles.

3rd stage

We take the profile "L" and fasten it around the perimeter of the room.

Starting "L" profile

If it is planned to place additional lighting in a false ceiling, electrical wiring is done.

4th stage

Products from PVC panels are being prepared. Laying the first panel is carried out in the corner to the transverse U-shaped profiles. Subsequent panels are inserted into the groove of the previous one and fixed to the frame with self-tapping screws.

Experienced craftsmen know how to make a ceiling from pvc panels. With a knife or a hacksaw, the latch is cut around the entire edge of the first panel. The material is easy to cut.

In order for the panels to fit snugly together, they are hammered to the stop during installation.

Attention! Ready-made strips of PVC panels should not be bent with great effort during operation. Plates can break!

5th stage

The last panel is installed. At this stage, special care and patience is required, as cutting to width will most likely be required. Carefully, so as not to break, the panel is inserted into the bar of the opposite wall.

Alternatively, the PVC strip is turned over with the lock facing the opposite direction and cut from the side of the groove.

Screws secure the last element.

6th stage

The ceiling plinth is fixed with liquid nails. Glue is applied to the baseboard and pressed against the ceiling for a few seconds. Remains of glue are removed with a rag.

Attention! Ceiling plinth can be successfully attached to both the wall and the ceiling.

If the plinth is collapsible, installation takes place by simply snapping the opposite part. The cracks are covered with sealants.

Completion of works

In the designated places in the PVC panels, holes are made for the installation of lighting devices. Then the lamps themselves and equipment for them are installed.

If the installation of fixtures is carried out for the bathroom, it is better to use light elements with low voltage (a current converter is needed). So you can protect yourself and your neighbors from above from electric shock in case of flooding.

PVC plates installed as a false ceiling in the kitchen can be perfectly cleaned from soot and grease with conventional detergents.

Conclusion

So, now we can say with confidence that making a ceiling from pvc panels with your own hands is possible even for people without experience in installing suspended ceilings.

Suspension plastic ceiling is one of the most practical and hygienic interior decoration. The material from which plastic panels are made, PVC has a glossy surface, on which microbes and harmful bacteria have practically no opportunity to multiply. In addition, this material is environmentally friendly and does not emit an unpleasant odor.

The listed qualities of plastic often determine the areas of their application. As a rule, these are kitchens, bathrooms, balconies and loggias. Plastic is practically not afraid of moisture and frost. Installing a plastic false ceiling with your own hands is very simple and this work will not cause difficulties even for a beginner.

Before you begin to familiarize yourself with the installation secrets, familiarize yourself with the sequence of operations. The list is simple, but you cannot rearrange the items. It looks like this:

 Calculation of materials of the suspended structure
 Marking the level of the future ceiling
 Installation of battens and embedded parts for lighting devices
 Installing the start profile
 Ceiling cladding with PVC panels

Installing plastic ceilings will require a tricky set of tools that every household master probably has: an impact drill or puncher, a level for marking the horizontal plane of the ceiling (water or laser), a tape measure, a pencil, a ruler, a paint chopping thread, a saw for metal and hammer.

Important to remember! To speed up the cladding process, it is recommended to use an electric screwdriver with a magnetic cross head.

Calculation of materials for the ceiling

To calculate a plastic suspended ceiling, you need to calculate the area of \u200b\u200bthe existing ceiling. To do this, multiply the width of the room by its length. You can measure with a tape measure with the help of one partner, which will be needed for other operations.

It is necessary to add 5-10% of the total area to the figure obtained. This is the necessary margin to compensate for the costs of cutting PVC plates. Most running size this is a width of 25 cm, a length of 3 m. However, other sizes can be found on sale.

As a crate, you can use a wooden beam 40 x 40 mm or 40 x 60 mm. If the climate is quite humid, then you can use the UD-27 wall or gypsum ceiling profile and the CD-60 load-bearing ceiling profile. They are made of galvanized metal and are not afraid of corrosion and deformation from excessive moisture.

The number of UD-27 profiles is equal to the perimeter of the room. The bearing ceiling profile TsD-60 is placed at intervals of 600 mm from each other. 300 mm recede from the edge of the wall and calculate the number of pieces. Usually the width of the room in meters is divided by 0.6. The length of the profiles is 2.5-3m.

To make suspended plastic ceilings look beautiful, you can use as a guide or starting profile PVC profile with decorative plinth. It can be made in a monolithic form, or the plinth can be attached to the profile groove separately. Its amount is also equal to the perimeter of the ceiling plus 3-5%.

In order for the joining of the plinth in the corners to look aesthetically beautiful, the plinth can be cut in a joiner's miter box at an angle of 45 degrees or you can buy ready-made plastic corners. The frame is fastened to the ceiling with dowels at intervals of 50-60 cm. Galvanized self-tapping screws with a press washer 25 mm long are used to fix the PVC plates to the ceiling.

Installation of a ceiling made of plastic panels

Installing plastic on the ceiling begins with markings. First determine the horizontal plane of the future ceiling. To do this, use a laser or hydraulic level. The minimum height of the ceiling can be lowered by the thickness of the beam or metal profile.

If more is required, then the galvanized TsD-60 ceiling profile is hung on straight or U-shaped hangers for plasterboard ceilings. Under the timber, you can put wooden dies.

The laser level is fixed on the wall with a dowel, stepping back from the existing ceiling the required distance. The device is installed in the horizon using its standard bubble levels. When turned on, the laser beam will mark the horizontal plane of the future ceiling on the walls.

Using a paint thread with blue, you need to “recapture” this level on the walls. After that, the axes of the ceiling profiles are marked on the ceiling. To do this, you can use a ruler, chalk and a building corner of 90 degrees.

According to the line marked on the walls with dowels at an interval of 0.5 m, the wall profile UD-27 is mounted. P-suspensions are attached to the ceiling with an interval of 60 cm with dowels. Their perforated legs are lowered down at an angle of 90 degrees. Carrier profiles are attached to them with 12 mm galvanized self-tapping screws.

If it is planned to install an overhead chandelier, an embedded part is mounted on the plastic ceiling on the existing ceiling.

You can make it from a piece of plywood and straight hangers, fixing them in the corners. Having bent the legs to the required height, the part is attached with dowels to. Do not forget to drill a hole in the center of the board and bring the lighting wire into it.

A guide profile along the perimeter is attached to the wall-mounted UD-27 profile with self-tapping screws with a press washer. The plate for plastic ceilings is made in such a way that there is a spike on one side of it, and a groove on the other. The first plate is cut to size and the spike is cut off. After that, it is brought into the guide grooves of the starting profile with a cut spike against the wall and pushed all the way.

With self-tapping screws with a press washer, the first is attached to the ceiling profiles in the upper wall of the groove. The second trimmed plate is inserted with a spike into the groove of the first. In order to reduce the joint between the second panel, they tap the heel of the palm. It is also convenient to do this with a hammer through a wooden plate.

The whole process is repeated until the last panel is laid into the plastic ceilings. It may have to be cut not only in length, but also in width. At a distance of 1-1.5 cm from the cut, it is necessary to drill holes in the front layer of the plate. It should be the diameter of the screw head.

The self-tapping screws will go in and fix the last plastic ceiling panel. Do not forget to drill a hole for the wire in the plate on which the overhead lamp will be located. The plastic ceiling is ready and if you still have questions, then the video on installing plastic ceilings will help answer them.

Reading time ≈ 9 minutes

Ceiling repair is a fascinating and time-consuming process, but sometimes it takes a lot of time and effort. It is always a shame when a plastered ceiling begins to crumble and crack over time. This type of finish is being replaced by polymeric surfaces. Plastic panels are very popular today as among experienced builders as well as among newcomers.

The modern market is crowded various types finishing materials. Among buyers, the simplicity and efficiency of installation, as well as quality and reliability, are especially appreciated. All these requirements are met by finishing the ceiling with PVC panels, with which you can easily sheathe the ceiling surface in any room. With them, you can forget about the thorough preparation of the base and alignment. Consider in this article how to make plastic panels on your own, without having much experience in repair work.

Material Features

Today, building stores offer a huge selection of PVC panel models, they can differ in size, shape, manufacturing technique (matte, glossy, varnished) and decor (wood, stone). However, it is very important not to confuse them with wall ones. Ceiling panels lighter and softer than wall tiles, they weigh less and are more fragile. They are easy to install, but require careful handling, so a dent can be put by hand.

Plastic panels have a number of advantages:

What are PVC panels

Plastic sheets are lightweight, porous PVC products. They are smooth and flat, on the cut of the long end, internal locks are visible for fixing during assembly, like in a laminate. The panels consist of two sheets interconnected by plastic ribs.
How to lay out the ceiling of plastic panels is shown in the video below.

Installation of PVC sheets is possible on a frame made of wood or metal, and for sheathing it is necessary to use several types of profiles.

Profile types:

Starting. They are used most often, close the ends of the sheets along the perimeter of the ceiling.
F-profiles. Also hide the outer ends of the panels.
H-profiles. This is a connecting type of profiles to increase the length.
Corners made of plastic (external and internal). Hide the outer and inner ends.
Plastic plinth for the ceiling.
Universal plastic corner. Suitable for all angles.

The downside of a PVC suspended ceiling is the limited choice of shapes and the impossibility of assembling a multi-level structure. And also the presence of joints between plastic sheets is always noticeable. It is better not to buy cheap panels, as this will ruin general form ceiling, because through low-quality sheets lighting fixtures can be seen through.

It is important to note that there are two technologies for mounting plastic ceiling panels:

For glue.
On the profile crate.

Choosing the Right

What are the criteria for choosing PVC sheets:

Of the tools we need:

Drill (low speed) or hammer drill.
Screwdriver.
Roulette.
Sharp knife and scissors for metal.
Hacksaw.
Miter box for cutting.
Hammer.
Water and bubble level.
Steel plumb lines (for a frame made of plastic or metal).

Varieties of PVC sheets:

Suture. The joints on such panels are immediately evident.
Seamless. The junctions of the strips on the ceiling are practically invisible.
Glossy. They reflect light well, they are able to visually enlarge and expand the space.
Matte texture. More a budget option, can imitate white paint finish.
Monophonic.
With drawings and other decor.

Finishing the ceiling with plastic panels is shown in stages in this video.

Let's start installation

All work on the installation of a suspended ceiling made of PVC panels can be divided into several stages:

Preparatory stage.
Installation of the frame (made of metal, plastic or wood).
Installation of the panels themselves.
Ceiling finish.

Preparation stage

The ceiling surface must be prepared for repair work. Although it will not be visible, the ceiling must be cleaned of dust, dirt, traces of old paint, plaster, whitewash or putty. Then we prime the surface and wait for it to dry completely.

Now let's start marking for the future frame: we apply a line on all the walls in the room using a laser and water level, which determines the level of our future suspended ceiling. In this case, you can use twine, previously painted with bright chalk. We press the string a little against the wall so that the chalk remains on it. For wiring from lamps or fixtures, we leave gaps from the frame to the ceiling up to 2 centimeters in size.

After we have finished delineating the perimeter, we proceed to mark the frame. The frame profiles should be located strictly perpendicular to the PVC sheets at a distance of 40-60 centimeters. How to make a ceiling of plastic panels, shown in this video.

Frame installation

Wooden

Using dowels, we mount wooden slats in the ceiling, screwing screws every 60 centimeters. Between the beams and the ceiling, you can place wooden linings for leveling. The disadvantage of a frame made of this material is the possibility of deformation when the wood gets wet and dry during operation.

Plastic

We make this frame from U-shaped plastic guides. We mount suspensions in the ceiling in increments of up to 60 centimeters, and profile guides in increments of 50 centimeters. We attach the starting profile to the guides using self-tapping screws at a distance of 50 centimeters from each other.
The bottom border of the frame should follow the line drawn in the layout step. To join the profile in the corners, we use a miter box or carefully cut with a hacksaw. The disadvantage of this type of frame is the inability to withstand heavy loads.

Metal

Such a frame is considered the most reliable, since it is not deformable and serves as the basis for a perfectly flat plane. The galvanized metal frame has the most sophisticated technology installation, however, all the same U-shaped profiles are used (every 60-80 centimeters). After lines are drawn on the surface to determine the level of the future ceiling, we make marks for installing plumb lines. How to sheathe the ceiling with plastic panels with metal frame shown in the video below.

Using a perforator on the walls and ceiling, we make holes for the location of plastic dowels. We mount the guides of the supporting profile to the wall, and the suspensions to the ceiling. We mount transverse profiles in load-bearing installations, and then align their horizontal position using the building level.

When the frame is installed, do not forget about the wiring to ensure the operation of lighting equipment in the future.

PVC panel cladding

We mount plastic sheets across the installed profiles. The first sheet must be cut so that it is 5 mm shorter than the width of the room. We cut off excess material with a jigsaw, grinder or hacksaw. The edges are processed with sandpaper.

We slide the finished first sheet into the starting U-shaped profile, make sure that the panel falls into place. Now we fix it with clips, self-tapping screws or screws to all the support profiles on the frame.

The second and subsequent sheets are mounted in the same way, except for the last one. We cut the finishing panel along the length by 1 mm less than the distance from the wall to the starting guide profile of the opposite wall. We push the strip all the way in the very corner of the ceiling to the profile. We extend the other end a little from the first corner and also insert it all the way.

A small gap may form between the last two sheets, which can be easily eliminated with masking tape. We apply adhesive tape across the finish panel and move it in the direction of the penultimate one.
Suspended ceiling made of plastic panels is ready. Now you can start finishing surfaces. Holes for fixtures can be cut at any stage, as shown in the video.

Assembling a suspended ceiling from PVC sheets with your own hands is not at all difficult. The main thing is to take into account the features of the material and strictly follow the instructions.

Citizens who want to acquire an inexpensive and functional element of decor should study the question of how to make a plastic ceiling with their own hands. The design gained its popularity due to its versatility. You can install it in the restroom, living room, bedroom or hallway. At the same time, it is not necessary to allocate significant funds for a full-scale repair. Another "plus" is a quick installation that does not require building qualifications.

In addition to the characteristics mentioned above, this kind of construction is not susceptible to moisture. This makes it possible to install it in country house or in a building where there are fluctuations in humidity levels.

Even if there were traces of flooding from the neighbors in the restroom or bathroom where it is planned to install the plastic ceiling, the beginner will cope with the installation without any problems.

Thanks to the use of unpretentious materials, it is easy to care for the ceiling. It is enough to wipe it with a dry cloth from time to time.

Among other advantages of the design, builders distinguish the following:

The ability to hide even significant defects in the ceiling. This includes construction errors, communications, wiring, and more. At the same time, panels made of PVC make it possible to integrate, for example, a spot lighting system.
The universal nature of the design. This means that the plastic ceiling can be assembled in a room with any architectural style without compromising it.

Another argument in favor of purchasing a plastic ceiling will be its durability. Subject to the manufacturer's recommendations and the absence of an emergency at home, the structure will last at least 15 years.

Recommendations: how to make a plastic ceiling yourself

As soon as the parameters of the room where you plan to hang the plastic ceiling with your own hands are recorded, you can safely go to the store for building materials. In order not to make a rash purchase, you need to understand the various modifications of suspended ceilings. Firstly, they are hard and heavy - wall type, and lightweight and at the same time fragile - ceiling type.

The second type must be acquired only when a person has sufficient experience. Even slight pressure with the tool on the plastic surface will result in a noticeable notch.

Speaking of other varieties plastic structures, then the designers distinguish the following:

With applied decorative varnish;
Cheap - represented by processed PVC (do not contain external coatings);
More expensive ones are presented on the market with printed panels.

It must be remembered that ceiling coatings differ in a number of other parameters. We are talking about color, surface texture and width. In this regard, it is necessary to carefully examine the potential purchase.

We choose a plastic ceiling with our own hands in the store

Not everyone can boast of having a construction education, but this is not a reason to refuse a thorough inspection of plastic ceiling panels. This can be done without a special tool. To begin with, the geometry of the outer surface is studied.

Irregularities, chips or unevenness when drawing a picture - all this is a reason to refuse a purchase.

In addition to the listed nuances, the buyer must check the following:

The number of stiffeners used - the more of them, the stronger the fastening of the plastic structure.
Take 2-3 panels and check how tightly they fit together.
Squeeze hard pvc panel and check its strength. If the product has retained the shape and appearance of the surface, then the decoration of the ceiling walls will be durable.

The analysis of plastic panels is completed with a bend test. This is done using the example of one of the two corners. The appearance of a chip or even a slight crack is a reason to look at another panel.

Do-it-yourself high-quality installation of a plastic ceiling

You can fix a plastic ceiling only with a building level in your hands. First you need to make sure that the profile of the ceiling is relatively flat. After that, 10 cm retreats from it. You can retreat more. It all depends on the height of a particular room.

The next step is to install the transverse profile. It acts as the basis for fastening the PVC panel.

Once the profile is fixed, you need to attach the L-shaped fasteners to it. This is done using a self-tapping screw.

The further course of action is as follows:

Internal communications are laid;
Filling the space with PVC panels;
Create holes for installing the lighting system;
The installation of the first panel always starts from the wall;
Each is cut with a hacksaw in accordance with the parameters of the ceiling;
After installing the first panel, it is fixed with self-tapping screws, and each subsequent one is inserted into the previous one.

If there are plans to use a plastic plinth, then in this case it is necessary to bring the edges of the panels to be installed into the L-shaped fasteners located at the end walls. The installation process is completed by "fitting" the width of the last panel. It is worth preparing yourself for the thought that you will have to tinker with this. You will need a ruler and a small hacksaw for metal.

Do-it-yourself plastic ceiling (video)

So, what can be said in the end about the plastic ceiling - it's inexpensive and beautiful. Interesting ideas And essential tool will do their job. It remains the case for small things, and apply a little of your strength!