Boiler Ariston instructions for use. Ariston water heater (80 liters): model characteristics and their main advantages

Updated:

2016-09-07

Instructions for the water heater Ariston 80 liters and a number of other issues regarding this equipment will be discussed in our material. We will talk about the main advantages of Ariston equipment, the device, the rules for connecting and operating the units.

Ariston products are in rather impressive demand in the domestic market. Many people choose this particular manufacturer when buying a water heater. What is the reason for this? The advantages that a boiler of 30, 50, 80 or even 100 liters carries.

When choosing a boiler for 30, 50, 80 or 100 liters, you should rely on the number of users and the number of consumer points. If this is a small family of 2 people, 30 or 50 liters is enough. But for families of 3 people or more, it is better to take a boiler for 80 or 100 liters.

Now about the benefits of Ariston.

1. Attractive, modern design Ariston. Many are guided not only by the efficiency of the boiler, but also by appearance, since the unit will be located in a conspicuous place. In this regard, Ariston appliances are able to decorate the interior, and not only provide hot water.
2. Long service life. Ariston boilers with a volume of 30, 50, 80 and 100 liters have a factory warranty for several years, but in reality they can serve for more than ten years. This was achieved through the use of special materials that cover the inner walls of the boilers. They protect against scale, rust, plaque.
3. Modern dividers are used. Due to them, cold water does not mix with heated water. Therefore, when heating even a small amount of water in a boiler of 30, 50, 80 or 100 liters, you can use hot water rather than waiting for the full heating of the entire volume of the water heater.
4. Protective mechanisms of the water heater. They work very efficiently, responding to potentially dangerous power surges. This largely ensures such a long service life of Ariston equipment, which we talked about earlier.
5. Antibacterial protection. With its help, you can safely wash under water from a boiler that has been operating in your house for more than a year, without fear of water contamination.
6. Protection of the water heater from an empty tank. Everyone knows that it is impossible to turn on the boiler when the tank is empty. Otherwise it burns out. But there have been many precedents. Unlike them, Ariston water heaters are equipped with special mechanism, which does not allow the device to be put into operation if the tank is empty.

Device

Now let's see what components a modern Ariston water heater consists of. In fact, regardless of the tank of 30, 50, 80 or 100 liters, the design remains identical. Only differences are in the size of the elements, their characteristics, capabilities.

• Water heater body. This is the outer shell that hides all the internal components. The designers did a great job making Ariston boilers not only efficient, but also very beautiful;
• Internal capacity. Or a tank. This is the same tank where cold water is poured from the water supply system;
• TEN. A heating element that provides heating of the incoming cold water into the boiler. In models with a volume of 30 and 50 liters, one heating element is used, and water heaters of 80 and 100 liters can be equipped with two heating elements at once. This contributes to faster heating of a large volume of water;
• Thermal insulation layer. An effective heat-insulating layer on Ariston boilers contributes to the long-term preservation of the temperature of the heated liquid;
• Pipe and splitter. These devices are responsible for the separation of heated and cold water, as well as the supply of hot liquid to taps, shower heads and other consumers;
• magnesium anode. This is an indispensable element of any boiler. Its task is to prevent salt deposits on internal surfaces. Considering the quality of the water entering the boiler from the centralized water supply, the developers used an improved efficiency anode to cope with less than perfect water. It is not uncommon for the repair of Ariston water heaters to involve the replacement of the anode or heating element;
• Temperature controller. It is necessary in order to turn off the operation of the heating element when the water temperature reaches the user-set mark;
• Thermal relay. An important unit that contributes automatic start Heating element in a situation where the temperature drops below a predetermined mark;
• indicator lamp. This voltage indicator allows you to monitor the operation of the boiler;
• Thermometer. All Ariston water heaters are equipped with built-in thermometers. With their help, the user can monitor the change in the temperature of the heated water.

Useful Features

Having chosen a boiler from Ariston for 100, 80, 50 or 30 liters, it will be useful to know about the capabilities of this equipment.

• Turning on and off. A working boiler is determined by luminous indicators;
• Power adjustment. The user himself sets the parameters on which the equipment operates;
• antibacterial mode. To turn it on or off, hold the "Power" button for 5 seconds;
• Temperature change. You can change from 30 to 75 degrees by pressing the + or - buttons.

Installation instructions

Let's be honest, the installation of boilers for 30, 50, 80 and 100 liters is best left to a specialist. But if you decide to do everything yourself, then we recommend that you follow certain rules.

1. Check the condition of the safety valve. If it has visually noticeable defects, be sure to replace it with a new one.
2. When installing the screws used to install the boiler, be sure to use plastic dowels.
3. Make sure that the grounding elements are installed correctly.
4. Use only a separate power line to connect the boiler. No extensions. Choose waterproof outlets.
5. To connect Ariston water heaters, use only the plug that came with the kit.

Operating rules

In order for your Ariston boiler to work for more than one year, and always efficiently heat all 30, 50, 80 or even 100 liters of water, follow certain recommendations for operating the equipment.

• Check the presence of liquid in the container before each shutdown and restart of the equipment. Only when the tank is full can power be applied. Despite the presence of a protective system in Ariston, ignore this advice do not recommend.
• If the boiler cord is damaged, the replacement is carried out exclusively with a component of the same manufacturer and with the same characteristics. It is better to buy accessories for Ariston boilers in branded or specialized outlets.
• When planning a long shutdown of the water heater, be sure to drain the old water according to the instructions for your boiler model, then turn off the water supply valve from the water supply system, and then turn off the power.
• Periodically, your Ariston will need a system cleanup. Here we recommend using a warranty and post-warranty agreement so that this procedure is performed by specialists. You can learn all the subtleties, in order to then do the work with your own hands.

Ariston boilers are time-tested water heaters that rightly occupy their high positions in the market.

Comfort modern apartment impossible without warm water. But public utilities are in no hurry to make our lives easier and more enjoyable. Therefore, it is necessary to independently take care of the presence of comfort in your home. Hardware stores offer us a huge selection of water heaters. Which one to stop?

If your home is not suitable for installation geysers, then opt for Ariston boilers 80 liters. This is the famous Italian trademark, which has become a leader in the design and manufacture of household appliances. In order to dispel your doubts, we will explain the boring instructions in an accessible language.

Features of the water heater

A characteristic feature of water heaters is built-in tank. Water accumulates in it, keeping the temperature set by the program. Such a model will become relevant for those who from time to time have problems with hot and cold water supply. Eighty-liter tank of the model, as indicated by the instructions, perfect option for a family of three. Wash the dishes, take a shower, bathe the baby.

The structure of the boiler resembles a thermos: in it, the liquid not only heats up, but also retains heat. Thermal insulation material occupies the empty space between the body of the water heater and the tank. Schematic representation The manual clearly shows this to us. Thanks to him, energy is saved: after all, you do not have to constantly maintain the temperature.

The inner tank of the water heater "Ariston" 80 liters is made of quality steel, which has an increased resistance to corrosion processes. The fact is that under the influence of aggressive environments (constant high temperatures, humidity, changes in water level), metal components suffer first of all. Therefore, the Ariston engineering bureau developed a special alloy, which received maximum resistance to rust corrosion.

The heating element of the water heater (TEN) has a reliable insulation. The feature of the model is heating element material - alloy, which may contain:

• copper;
• stainless steel.

Thermal power is increased by a brass flange.

One of the main parts of the Ariston boiler 80 liters is magnesium anode. It is made of a special alloy and is attached next to the heating element. Its function is to protect the walls of the water heater tank from rust, to reduce the amount of scale. If you do not start fighting corrosion in time, then over time it will begin to corrode the metal walls of the container and, as a result, it will begin to let water through. Scale layers on the heating element will increase the heating time, which will lead to waste of electricity, and even breakage of the element. Entering into chemical reaction With aggressive environment, the anode shields the internal parts from negative impact. You, of course, will not read this in the instructions for the device, but to obtain general information healthy.

Intelligent control system in which even a schoolboy will understand. The ergonomic design allows you to place the Ariston 80 liter water heater models in a horizontal position. In addition, the equipment is reliably protected from overheating, high pressure.

Water heater installation

So you bought a boiler and carefully study the instructions. Remember that in order for the water heater to work reliably, all installation actions should be entrusted to the service center employees. In case of an error at self installation, warranty obligations technology does not apply.

Water heater: control system

Before turning on the water heater, you must make sure that there is water in the tank.

When the boiler is connected to the network, within one or two seconds, the temperature readings will be displayed on the screen of the water heater control panel. The instruction indicates that if the numbers flash, then this means only one thing - the device is still turned off. Click on the "On / Off" button (in the upper left corner) to start the technique.

There is a power control button on the remote control. It can be used to adjust the strength voltage from 2500 W to 1500. This function allows you to increase or decrease the time for heating water.

The temperature setting is activated by holding the button (plus or minus) for a few seconds. The range ranges from 30C to 75C. After installation, the water heater remembers the program, working in the specified mode. The instruction says: if the device is turned off, all settings are reset.

If you have not read the instructions to the end, then you do not know about the very convenient function of the water heater - protection against bacteria. Hot water is an ideal breeding ground for all kinds of microorganisms. And heat kills them. By enabling this option, you force the technician to increase the degree above 65, that is, to a level where microbes cannot exist, multiply. Once a month is enough for your water heater tank to be freed from all evil spirits.

Possible breakdowns

Water heaters "Ariston" 80 liters belong to the technique with a high degree of reliability. However, as sad as it is to say, damage does happen.

According to the repair service employees, the most “popular” breakdown is the failure of the electronic scoreboard. Do not panic, flipping nervously through the instructions, this does not affect the overall operation of the water heater. Experts also recommend using maximum temperature, but within 60C.

Heating elements for boilers "Ariston" 80 liters need to be changed from time to time. No matter how powerful anti-scale protection is, the quality of our water still does not improve. Therefore, after two or three years, your heating element will turn into a small pebble. If you do not open the water heater, then you can determine the presence of this unpleasant feature by increasing the heating time.

The instructions for the water heater indicate the marking commonly reported errors:

• E2 - an attempt to turn on the boiler with an empty tank;
• E3 - temperature sensor depressurized, short circuit occurred;
• E4 - in case of heating water up to 90C.

If you see any of the above on the water heater control panel, you need to contact the service center.

So, we examined the main characteristics of one of the popular models that Ariston water heaters represent 80 liters. With proper operation, compliance with all the rules of the instructions, this reliable device will serve you for many years. And a wide network of official service centers will nullify discomfort in the event of a breakdown.

Like all Ariston appliances, the water heaters of this company have a lot of benefits:

1. The first of these can be called stylish design which helps to decorate any interior. Moreover, each of the models is created in accordance with the latest technologies.
2. Ariston 80 water heater is different longest service life . This effect was achieved due to the fact that internal walls storage tank covered with a layer modern material which protects the tank from plaque and rust.
3. Built-in latest dividers, prevent mixing of already heated and cold water . This allows you to keep the temperature of the liquid. Also, the Ariston heater is protected from overheating, thanks to built-in temperature control sensors.
4. Presence of a safety shutdown device , which is triggered at moments of a sharp change in voltage.
5. Using Ariston water heaters, users can significant savings on gas or electricity consumption . This is facilitated by the presence of thermal insulation, which keeps the water hot for a long period of time.
6. Many models of water heaters equipped with bacteria protection which makes it possible to use purified water. If there is no water in the system, then you do not have to worry that the water heater will turn on, as it is equipped with special protection.

The device of ARISTON water heaters for 80 liters

The external simplicity of any water heater carries with it the same uncomplicated internal structure. The difference can be observed only in the external design and materials from which the heater is made. The external structure of the housing can be made in a cylindrical or flat shape.

Any water heater has:

• Inner tank - a boiler into which cold water enters. It is framed by an outer casing.
• The water that entered the tank is heated by the built-in heating element . For faster heating of water, two heating elements may be present in the boiler.

• Thermal insulation layer , which is present between the body and the boiler, acts as a thermos, which allows you to keep the water temperature longer.
• Water enters the tank through shortened branch pipe with divider . The heated water is supplied by a drain pipe.
• magnesium anode , built into the ariston 80 water heater, helps prevent the deposition of mineral salts on the walls of the inside of the tank. This element is replaced as needed.

• During heating, when the set temperature is reached, the thermostat , which automatically interrupts the power circuit.
• If the heating element is turned on, and the water temperature indicators have fallen below the set ones, then the configured thermal relay .
• Allows you to control the operation of the water heater voltage indicator (indicator light).
• Built-in thermometer makes it possible to monitor temperature changes.

The water heater has the same typical internal structure. accumulative ariston 80, which refers to flat horizontal models.

Shuttle Ariston electric water heater: instructions for using boilers, diagram

After buying such an assistant as an Ariston 80 liter water heater into the house, the instruction should be the first document that should be carefully studied before starting its operation. This will help to understand all the nuances of working with the boiler and extend the period of operation of the device.

Ariston water heater 80 liters is used to supply the house with hot water. The choice of this series of heaters is promoted by a set of positive characteristics.

The ariston 80 v water heater has the same device and instructions for use as all models of this series. Installation should be carried out in accordance with the attached diagrams.

Connecting the boiler Ariston

It is better if this work is carried out by specialists. The rules to be followed when installing the device are given below:

1. It is necessary to inspect the safety valve, which should not have visible flaws. If they are, then the damaged part should be replaced.
2. Plastic dowels are used for driving screws.
3. Be sure to check all grounding elements.
4. The electric heater requires a separate power line to operate. The use of extension cords is strictly prohibited. The socket is placed in a non-humid place.
5. In operation, you must use the plug that came with the kit.

The water heater Ariston 80 performs the following functions :

• Turn on/off . After switching on, the whole system starts up, which is due to the lights on, the temperature of the water in the boiler will be displayed. If the indicators are not displayed or flashing, this indicates a system shutdown.
• Water heater ariston abs vls 80 has power level adjustment function , which makes it possible to set the necessary indicators.
• Water heater ariston abs vls pw 80 allows you to use antibacterial function , which can be activated or deactivated by holding the "power" button for 5 seconds.
• Possibility to adjust the temperature using the "+" or "-" buttons in the range from 30 o to 75 o; The set values ​​are not fixed. After switching on again, the values ​​\u200b\u200bmust be set again. Standard temperature values ​​​​are 75 °, power - 1500 watts.

Water heater operating rules

It is not difficult to extend the life of an ariston brand storage heater, you just need to install it according to the instructions and steadily follow the rules for using the device :

• Should control the presence of water in the boiler every time you turn it on and off devices. Switching on is possible only when the tank is filled with water.
• If the power cord is damaged, replacement must be carried out with a material of the same brand , which is best purchased at a specialized outlet.
• If the heater will not be used for a long period, especially during the cold season, then water from the boiler must be drained , following all the rules prescribed in the instructions. After that, the cold water supply valve is closed. After these steps, the heater is disconnected from the electricity supply.
• The heater eventually requires cleaning from dirt . To carry out this work, it is better to use the services of specialists.

Reviews of ARISTON water heaters with a volume of 80 liters

For those buyers who have decided and purchased an ariston water heater, the reviews remain purely positive. Below are some of them.

“Pros: excellent “employee”.
Cons: didn't find any.

Since we have a private house, but there is no gas, it was decided to purchase a boiler. Tired of constantly heating water on the stove in order to buy up and simply wash the dishes. We asked friends who already have experience with such units. Those, in turn, advised the ariston water heater. After reading more reviews, we opted for a brand like ARISTON.

Bought a model with a volume of 80 liters. This is enough for a family to use. I really liked the presence of a sensor with which you can always find out the level of water temperature in order to “not get into a slippage”)). This heater served us for many years, it was even sad to leave (they removed it, because they had gas and connected a double-circuit boiler). But during the service, this heater proved to be just fine: it quickly “delivered” hot water and kept its temperature for a long time, it consumed little electric energy. In general, the model is excellent !!!

“Advantages: compactness, fast heating of water, low electricity consumption, equipped with additional protection.
Cons: none.

Excellent water heater. I had to get acquainted with him when a systematic shutdown of hot water began in the houses. indefinite terms. In order not to sit and wait for a "miracle", it was decided to buy a water heater. On the advice of the seller purchased a heater

Ariston SG-80, which did not have a high price. And yes, we liked it too. The place for the boiler was determined in the toilet, where it did not create inconvenience to anyone. During the use, we made sure that we took an excellent assistant: it quickly heats water (80 liters in 4 hours), consumes little - 1.5 kW, heats water to an acceptable temperature - 75 o, there is a safety valve and a magnesium anode. We were completely satisfied with our choice!”

“Advantages: simplicity, reliability, ease of use.
Cons: didn't find any.

The Ariston SG-80 brand water heater came into our house back in 2013, we bought it at a discount and did not regret it. My husband did the installation himself and it wasn't that hard. The heater serves the bathroom and sink. There is enough water to the head, despite the fact that we set the heating level to 50 o, it allows you to save a little. It takes an average of 2 hours to heat 80 liters at this temperature. I was very pleased with the quiet operation of this device. We are satisfied with the purchase."

“Advantages: heating up to 75 °, low consumption of electricity.
Disadvantages: little essential, but ill-conceived lid.

Our small town is not connected to hot water supply. While they lived together, they managed. But after the appearance of the baby, they decided to buy a boiler. We chose models with a volume of 80 liters available at our means. Stopped at Ariston models SG 80, which suited us in all respects: energy consumption of 1.5 kW, volume, heating temperature, which reaches 75 ° and, of course, the price.

Having established, they themselves felt the dignity. Everything worked "with a bang." It created a little inconvenience when switching the temperature, when it was necessary to switch the lever under the lid. It was not entirely convenient to crawl with a screwdriver to the right place. But this is not so significant, because we had to change the temperature indicators only once. In general, the model is excellent. I recommend to all!"

Prices for the main models (name, description, manufacturer, price)

When it comes time to buy a heating device, it is immediately better to pay attention to the Ariston 80 liter water heater, the price of which is fully consistent with the quality. Consider some models of heaters from this manufacturer.

ARISTON ABS BLU R - vertical storage water heater. The price ranges from 6300 to 7700 rubles.

• It has an anti-corrosion coating Ag +;
• Additional protection in the form of a magnesium anode;
• Uniform heating of water is provided by the Nanomix technology;
• Thanks to Absolut Bodyguard System technology, the system is blocked in the event of a lack of water or power surges;
• Built-in safety valve.
• Built-in external thermometer.
• Mechanical control with indicator.
• Water heating up to 75 ° is carried out in 3 hours with a consumption of 1.5 kW.

water heater ariston vls pw 80 - wall heater with the possibility of mounting horizontally and vertically. The price for this model varies between 11,000 - 13,000 rubles.

• The inner tank is treated with a special Ag+ coating;
• Double heating element accelerates water heating by 60% after connecting the ExraPower mode;
• ABS 2.0 protection protects the system from power surges and operation in the absence by turning it off.
• External water temperature sensors allow you to monitor the state of water heating;
• Built-in ECO antibacterial system;
• The Nanomix technology accelerates the heating of water, which contributes to the uniform heating of the liquid.
• Water is heated up to a maximum value of 80 °C at a power of 1.5 kW in 3 hours, at a power of 2.5 kW in 2 hours.

Ariston SUPER SGA - excellent gas heater made in Italy. The price of such a storage water heater is 16,500 rubles.

Device characteristics:

• Steel case;
• Internal enamel anti-corrosion coating;
• Thermal insulation layer made of polyurethane foam;
• The presence of a gas valve.
• Connection can be carried out both in parallel and in series;
• Works independently of the mains;
• Ability to control the flame;
• External regulators and indicators.

Flat electric water heater Ariston ABS VLS INOX PW Can be installed in vertical and horizontal position. The price for such a model is 17,250 - 19,930 rubles.

Main characteristics of this model:

• Steel inner tank with additional protection;
• The “fast” function speeds up the heating process by turning on the second heating element;
• Antibacterial protection system;
• Protection against overheating, power surges, switching on without water;
• Built-in “Nanomix” system;
• The presence of an electronic thermometer;
• There is a system "Autodiagnostics";
• External display with control buttons.
• Water is heated up to a temperature of 80 ° C by one heating element in 3 hours 06 minutes with a consumption of 1.5 kW, with the “fast” system turned on in 1 hour 51 minutes with a consumption of 2.5 kW.

Water heater "Ariston" is designed according to the latest technologies, has not only a high-quality water heating tank, but also good technical characteristics. The main advantages of such a boiler are durability and reliability, intuitive control and convenient operation. Each device is necessarily supplemented by a detailed instruction manual, which allows you not only to install and connect the water heater yourself, but also to perform simple repairs with your own hands.

Electric water heater Ariston: technical characteristics of boilers for 50, 80 and 100 liters

Ariston produces more than seventy models of storage water heaters with a capacity of 10-200 liters. The storage electric water heater is represented by several models, among which the 50.80 and 100 liter series are especially popular.

	Volume (liters)	Heating time up to 45°C (min)	Protection class IPX	Dimensions (mm)
ABS VELIS INOX QH D
ABS PRO ECO INOX POWER SLIM
ABS PRO ECO INOX POWER
ABS BLU ECO POWER SLIM

Water heater Ariston: installation (video)

Gas boiler Ariston

Price gas equipment depends on the principle of the water heater and its type. Each boiler is arranged in the same way, but it also has some features:

• DGI water heaters have electronic ignition and manual control of power indicators. Characteristic is the natural removal. The gas water heater has a concise rectangular shape;
• Fast-CF does not need additional power supply, and copper is used for the manufacture of the heat exchanger, which can significantly reduce heat loss;
• Marco Polog7s features a closed combustion chamber, providing additional safety of operation. There is a touch screen and a modern design, which makes the model the most popular among consumers;
• Marco Polo M2 is a model with a combustion chamber open type and a smoke exhaust fan. There are a couple of stages of device protection that prevent overheating and guarantee high performance safety and long service life.

Before installing the device, you must familiarize yourself with the principle of operation of the Ariston water heater, as well as study the instructions with detailed instructions individual features installation.

Boiler Ariston: device and principle of operation

The manufacturer uses proprietary protection against corrosive changes. Everything budget models equipped with a mechanical regulator, and each expensive water heater is equipped with a digital control unit. An internal temperature controller works inside the water heater, which allows you to optimize heating. The device and principle of operation of such equipment are as follows:

• an internal tank or boiler designed to receive cold water and framed by an external casing.
• built-in heater designed to heat incoming water;
• heat-insulating layer located between the body of the water heater and the boiler, which performs the function of a kind of thermos and allows long time keep the temperature indicators of heated water;
• a shortened branch pipe equipped with a divider for water supply;
• outlet pipe;
• built-in magnesium anode to prevent strong deposits in the form of mineral salts on the walls inner surface tank.
• thermostat designed to automatically interrupt the power circuit after heating the liquid to the specified temperature.

Control of the operation of water heating equipment is carried out by means of a voltage indicator, and with the help of a built-in thermometer, you can monitor changes in temperature indicators.

Ariston water heater user manual

Convenient connection of water-heating equipment from the company "Ariston" consists in the use of manufacturers of an autoclave special flange mechanism. The basic principle of operation of such a mechanism is based on pressing the gasket under the influence of water pressure. As a result, it is possible to completely eliminate not only the leakage of liquid, but also the formation of watery smudges. To avoid unnecessary heat losses, the fixing of electrical models of the water heater from the company "Ariston" is carried out in close proximity to the output point.

Overview of the water heater Ariston (video)

Optimal standard diameter fastener must be 10 mm or more. Installation of 100-liter hot water tanks has some features. In this case, fastening must necessarily occur with fixation on the other side of the wall. It is for this reason that experts recommend installing water heaters before the start of the main finishing works.

Important to remember, that when connected different types metals, it is mandatory to use dielectric adapters, through which differences in the degree of expansion of materials differing in parameters are compensated. It is necessary to connect the input using a standard valve, and a branch pipe is installed on the output. At the final stage, the installed water heater must be turned on and checked for correct connection, no leaks and operability.

During the operation of water heaters manufactured by Ariston, difficulties do not arise, but it is necessary to take into account some rules that affect the durability of the device and its performance. Periodically, preventive measures are taken, including inspection of the internal parts of the equipment, descaling and replacement of the heating element that has become unusable. average duration the operation of all mechanisms of a particular model can be found in the manufacturer's instructions. It must be remembered that the timely replacement of the anode allows you to extend the life of the water heating mechanism. In accordance with the recommendations of professionals, it is not advisable to set the thermostat to the maximum heating level.

If you set the temperature limit by about 10 ° C below the maximum values, then you can significantly reduce the cost of electrical energy, as well as save the resources of equipment parts. It is important to remember that you can disassemble the device yourself only as a last resort. Do-it-yourself repair work will result in the exclusion of the possibility of exercising the right to warranty repairs.

Do-it-yourself Ariston boiler repair

Repair work related to the elimination of breakdowns in gas appliances require the involvement of qualified specialists, and the repair of an electric boiler can be done independently.

Major mechanical failures are most often manifested by tank leaks., from which water begins to ooze or drip during operation. The cause of this failure may be corrosion in the areas of the welds or a malfunction of the reverse protection system of the valve, which operates and performs an emergency reset. In this case, it is necessary to eliminate the excess level of water and air pressure by means of a reducer. Any depressurization of the storage tank will require the purchase of a new tank. If such a defect is insignificant, then it is enough to replace the sealing gasket.

A relatively inexpensive undertaking is self-replacement some electrical parts, including heating elements, bimetal thermostats, sensors or switches. In case of prolonged heating, noise or hissing, as well as in case of activation of the ABS system shutdown protection, the replacement of the heating element is required, the average service life of which does not exceed five years. Replacement is carried out after de-energizing the device, draining the water and removing the flange.

It is very important to systematically check the magnesium anode, which is consumable and intended for effective protection the inner surface of the tank and the heating element from corrosive changes. When the anode is thinned by ½ of the original volume, a mandatory replacement is carried out. The heating element is able to last much longer if the so-called “dry” heating element is installed in the structure.

Water heater repair Ariston (video)

Ariston, a well-established manufacturer in the water heating equipment market, has been a leader for a long time and offers the consumer only high-quality and very reliable products in a wide range. And the presence of the largest network of service centers in many cities of our country allows you to easily receive qualified assistance, as in repair work and maintenance of water heating equipment.

The history of the Italian company Ariston dates back to 1930. Then the product range was limited only to scales, but today it includes multifunctional household and professional appliances. Among the favorites is a reliable and durable Ariston water heater. It differs from competitive technology in a key ratio of qualities for consumers - price-quality.

Long history

In 1930, thanks to the quick-witted Aristide Merloni, a new brand appeared on the household appliance market - Ariston. The family business specialized in the production of scales. A little later, the assortment was replenished with electric heaters, cylinders for liquefied gas. Flowing and storage water heaters in the catalog on the official website appeared relatively recently. Further, the business was transferred to the sons of the founder - Vittorio, Antonio and Francesco. As a result of the division of the company, there were three main divisions:

• Ardo;
• Merloni Elettrodomestici;
• termosanitary.

All companies specialize in the production of equipment under the brand name Ariston. Until today, one of the divisions has been intensively acquiring shares in other enterprises, expanding its composition, assortment and approaching the main market competitors - Bosch, Siemens, etc. The repurchased brands include the well-known Indesit and Scholtes, as well as 50% of GDA, which produced household equipment Hotpoint.

Today, factories in different countries are engaged in the production of instantaneous and storage water heaters Ariston, as well as other equipment:

• Poland;
• Russia;
• Türkiye;
• Italy;
• France;
• Portugal.

In terms of turnover, this holding ranks third in the world ranking.

Rating of the best models of Ariston water heaters

The official website of the company is full of various Ariston water heaters. They differ in price, installation method, technical characteristics, principle of operation and design. Based on these criteria, a the lineup the most successful variations, both in the opinion of specialists from the service center and users.

Ariston ABS BLU EVO RS 30

The Ariston 30 heater has a storage heating system. Its small dimensions of 44.7x44.7x41 cm make it possible to install it vertically under the washbasin. The storage water heater of 30 liters is powered by a voltage of 220 volts, while consuming a power of 1.5 kW.

Ariston ABS BLU EVO RS 30

Thanks to the latter indicator, the device is able to heat water up to a temperature of 80 ° C, and it takes only 70 minutes to get the optimal temperature of 45 ° C. As an additional function, there is a thermostat and an overheating protection function. The price of Ariston 30 liters is 5800 rubles.

Ariston ABS VLS EVO QH 80 D

The Ariston 80 l water heater has a storage heating system with an electric tubular heater. It can be installed both vertically and horizontally. Boiler Ariston consumes power of 2.5 kW from a power source with a voltage of 220 V.

Ariston ABS VLS EVO QH 80 D

The device is capable of heating water up to a temperature of 80°C. EVO Ariston 80 liters is equipped with a stainless steel coated tank. Separately, it should be noted the protection system against overheating and starting without water. Equipment dimensions 50.6x106.6x27.5 cm, weight - 27 kg. There is an Ariston water heater of 80 liters - 16,000 rubles.

VIDEO: Overview works by Ariston ABS VLS EVO QH 80 D

Ariston ABS Andris Lux 15 UR

The Ariston water heater for 15 liters has a boiler with a silver coating on the inside. The electric device has a rated power of 1.2 kW, thanks to which the heating element is able to heat water up to a temperature of 75 ° C.

ABS Andris Lux 15UR

The device is installed on 15 liters under the sink, due to this you can save a lot of usable space. The cost of a storage electric water heater is 7,000 rubles.

VIDEO: Overview of ABS Andris Lux 15 UR

Ariston 50 ABS VLS Evo Inox

The water heater for 50 liters has an attractive design and small dimensions of 50.6x27.5x77.6 cm. The design includes an immersion heating element, which has a power of 2.5 kW. Ariston for 50 liters can heat water up to a temperature of 80 ° C.

Ariston 50 ABS VLS Evo Inox

The device operates from a power supply with a voltage of 230 volts. Electric Ariston water heater equipped with a display safety valve. The price of the apparatus for 50 liters is 21,500 rubles.

VIDEO: Ariston 50 ABS VLS Evo Inox review

A capacious storage water heater Ariston for 100 liters is installed on the wall surface. Its dimensions are 125.1x50.6x27.5 cm. The design includes an immersion tubular heater. The device is equipped with an electronic display that shows all operating modes and other necessary information. The inside of the tank is covered special material Ag+, and an enameled heating element is also built into it.

Ariston 100 liters ABS VLS EVO

The 100 l storage water heater has a double boiler system, so that the water warms up much faster. Already 29 minutes after switching on, you can take hot shower. The intelligent system of the device automatically remembers all heating cycles, so the equipment will prepare water by the time it is used most often. The price of a model for 100 liters is 19,900 rubles.

VIDEO: Overview of Ariston 100 liters ABS VLS EVO

Ariston ABS VLS Inox PW50 (cumulative)

This is a horizontal 50-litre machine, which has a flat rectangular shape, thanks to which it fits perfectly into small-sized rooms. In addition, it has the ability to work with several water intake points, which makes it possible to create an autonomous water heating system for all mixers installed in the house.

Ariston ABS VLS Inox PW50

The power of the equipment is 2.5 kW, it has 2 heating elements. As a safety feature, Ariston 50 liters uses a device shutdown system with an empty tank and overheating. The nominal liquid heating temperature is 80°C, and the outlet pressure is 0.2-8 Atm. In online stores, such equipment is sold at a cost of 19,000 rubles.

VIDEO: Ariston ABS VLS Inox PW50 work review

Problems and malfunctions of Ariston water heaters

Ariston equipment is rightly considered reliable, able to work for many years without causing inconvenience. However, regular maintenance and preventive inspection of the equipment is necessary.

Among the main faults are:

• failure of the electronics - only the sensor, heater or switch may break, or maybe all at once;
• during operation, the machine may knock out, which means that the equipment lacks “cash” voltage - for correct operation, you will have to turn off all powerful electrical appliances in the house for the duration of the wash;
• the problem with the ignition may be poor-quality wiring.

All problems are solvable, but on condition that repairs and maintenance are carried out by service specialists.

VIDEO: Why the boiler does not turn on and does not heat