DIY portable shoe rack

A great option for a simple wooden shoe rack that you can easily make with your own hands from wood. This shelf has a large surface area, which means you can put more of your shoes on it. Also, this shelf is perfect for toys, books, tools, shoes and other things. The shelf is highly mobile, which means that you can put it at any time where it may suddenly be needed.

Shoe shelf carousel (step by step photos, drawings)

You can make such a multi-storey shelf with rotating shelves for shoes using any ready-made cabinet of square base sizes, or you can make the cabinet again yourself.

We fix a metal pipe motionless in the closet, and we already install rotating round shelves for shoes on it. We insert pins into these round shelves for shoes, on which, in our own words, our shoes will be located.
The author of the shelf (who, unfortunately, is not known to us) recommends making two types round shelves, for 9 pairs of shoes (for children) and 12 pairs of shoes (for adults) (see the drawings in the photo below). So a lot more shoes will fit into the closet and its efficiency will increase.

See step by step photos and manufacturing drawings:

Shelves for shoes From pipes

shoe shelf from pipes.
DIY master class

Let's look at the photo how to make such a metal shoe rack water pipes with your own hands. See step-by-step photos in the photo gallery below.

This shelf will look great at the window, in the bathroom, hallway, living room or kitchen.

Step-by-step photos of the master class:

Floor shelf or table with shelves for shoes in the hallway

Most likely this option applies more to tables than to shelves. But still, we posted this model here, because. We hope that this option of personal organization will be of interest to you, and most importantly, useful, because. When arranging a home, all options must be taken into account !!!

See below step-by-step photos of the master class

Photo Source: dailyinteriordesignblog.com Author Photos: Josh Rhodes and Elsie Larson

Do-it-yourself bench shelf for books or shoes

This shelf bench is also perfect for toys, spare parts or tools in the garage.

We did not lay out the entire process of alteration, because. it is unlikely that you will buy a rack to make a bench out of it. Therefore, we have placed only the most necessary photos, so that you just get acquainted with this option. According to the photo, you can make the same simply from the boards.

We beautifully thread the threads to support books

Photo source: instructables.com.

DIY shoe rack

Put together four planks and making a regular shoe rack is not at all difficult, but what if you add a little zest. How do you like this option? So to speak, three in one, compact, creative, on wheels. Adjust the dimensions of the main and internal shelves as you need, well, mobility, it's very convenient.

Help build this fun shelf with these step-by-step photos

Operating procedure

• We decide on the total area of ​​​​the shelf, this is after we returned from the store with new wheels.
• We prepare the material, measure, saw, grind.
• We remove the dimensions of the internal shelves and the height of the racks. It all depends on what kind of shoes will be stored on the shelf, everything can be provided, from slippers to boots.
• We make blanks according to the sizes, you see how everything is beautifully laid out in the photo.
• Drill holes in corners for self-tapping screws
• We fasten the details first of the inner shelves, then the main ones.
• Four bolt holes are needed for the wheels, they can be made in advance and tighten the bolts at the end.

The shelf is ready, further decorative work is up to you. You can paint, upholster the top shelf with a cloth, this is already to your taste.

Foldable shoe rack

It is known that there are never too many shoes, especially this topic is very relevant for women. But why is it needed, probably, you can get by with the usual one, fixed structure. The problem, as always, is free space, in a small apartment there is always not enough space, and in the summer, as you know, the number of shoes that are used doubles. So a folding portable shelf is perfect as an additional place to store shoes for the summer season. Or another option, suddenly guests came to you. In order not to make a dump in the corner of the hallway, just take your folding shelf and order from a secluded corner. In general, a useful thing if you like it, make a folding shelf with your own hands not difficult.

The most common tools are a drill, a jigsaw, sandpaper. The materials are shown in the photo, but it's your choice, boards or plywood, see for yourself. The assembly process is shown in step-by-step photos, everything seems to be clear there. You can read the instructions on the website, link under the gallery. In the photo you can see the shelf in the unfolded and folded state. According to the author, if all the tools and materials are available, it will take a maximum of two evenings to make the shelf.

Photo source www.instructables.com/id/Folding-Shelves

Shelf bench for shoes

It will not be difficult for you to make such a simple wooden shelf in the hallway with your own hands. See step by step photos below on how to do it. The shelf of the bench is suitable in the hallway for shoes, in the bathroom, in the nursery for toys, in the room for books, magazines and newspapers.

Photo source: howtospecialist.com

Shelves for shoes from boxes

Do-it-yourself shoe rack made of wooden boxes

Another option for a shoe rack made of wooden boxes, which you can do yourself.

This shelf is perfect for toys, tools in the garage, for shoes, flowers (if you knock out the back wall of the drawers), as well as for other household items.

Below you can find a step-by-step master class for making this shelf.

Photo source: instructables.com.

How to make a shelf out of shoe boxes - no nails

This will probably be the easiest shelf you have ever made.. So, you need to find five boxes and a can of paint. Then take a brush and paint the container in the color that best suits your interior. When the paint dries, everything, the shelf is ready.

You just have to decide how to put them. If there are small children in the house, the structure, of course, must be connected with bolts or self-tapping screws, or even better, attached to the wall, so it will be safer and more reliable. But if there are no children, then there is no need to fasten, the boxes are strong enough. And the main advantage you can change the shape of the structure at least every day. Imagine, every day you have a new shelf and no nails.

So, for example, today you have a pyramid, and tomorrow a ladder, according to your mood.

When folded into a durable design, it is very convenient to store shoes. For a change, you can pick up one box and fold whatever you like.

Well, what do you think?
Photo source creatingreallyawesomefreethings.com

Do-it-yourself corner shoe rack in the hallway.

Let's see how to make a simple wooden corner shelf with rounded shelves to your apartment. This shelf is suitable for books, magazines, for shoes in the hallway, for soap accessories in the bathroom, for tools in the garage, as well as for kitchen utensils in the kitchen.

Photo source: howtospecialist.com

Shelving rack made of cardboard boxes do it yourself step by step

Watch the master class on how to make this shoe rack from the photo above.

Minuses:

• not very reliable
• not tight

Pros:

• cheap
• simply

This design uses two types of boxes

1. these are the large shelves that are made of
2. these are narrow, from which drawers are made

All boxes are fastened with ordinary tape.

Advice:

• light things should be placed on the upper shelves, larger and heavier things on the lower ones.
• when you cut large boxes, as shown in the pictures, then from these scraps you can make additional shelves for small items inside the shelves, for this you just need to make cuts in the trim and connect the trim with a lattice.
• Also, these trimmings can be used as additional supports inside the boxes, in problem areas.

Photo source: wikihow.com

Cardboard shoe rack

This is the simplest piece of furniture you will ever make. I represent do-it-yourself master class on making cardboard shoe racks , an irreplaceable thing for new settlers. In short: we make three equal strips of cardboard, push them through so that they bend well, you can use a blunt knife. Tape the sheets on one side. We make triangles from sheets and fasten with tape. Fix the resulting triangles with glue on a sheet of cardboard. The pyramid can be made in any size , how many triangles you make, this will be. Fasten another cardboard sheet on top, this will be the top shelf. Anyone can do this kind of thing. It will come in handy before buying a locker so that the shoes do not roll around anywhere.

But that's not all, if there is very little space, Can you make a hanging shoe rack? from cardboard, it's even easier. It is necessary to make such a rectangle from a sheet of cardboard, as in the photo. Choose the size yourself, depending on what kind of shoes you will put there. Then again lay out the box, and using it as a template, cut the blanks. Then make as many pockets as you need, insert them into each other and fasten them with tape at the back. The shelf can be hung on the wall or on the door.

Of course for winter shoes not really good option, but in the summer it is very convenient, save a lot of space.

Secret door - closet and shoe rack

Let's see how to make a secret door in an apartment, for example, in a closet, in a dressing room, in a wall.

If you want to make a secret room, or hide some unsightly part of the apartment to make it look more aesthetic, then follow the step-by-step photo instructions below.

Don't use loops because your the design must withstand up to 450 kg! The author of the photo advises using bolts as hinge pins, which should be welded into the frame.

IMPORTANT fix the frame strictly vertically, for this you should use a plumb line. Attach the top mount to the ceiling first, then plumb the bottom mount. (see photo).

See step-by-step photos of production:

Don't forget to install wooden fence above the door (see photo). Attach a magnet to this stopper to keep the door pressed against the wall. Be careful when choosing a magnet, it should not attract too much and not too weakly.

IMPORTANT!!!: according to fire safety rules: all entrances to the premises in which there are stoves or gas stoves and gas pipes, must be clearly visible.

Photo source: wikihow.com

Unusual shoe racks

do it yourself

As the theater begins with a hanger, so any apartment with a hallway. Shelves for shoes are not just a useful piece of furniture, they are part of the interior design, so if you are a fan of creative solutions, you can start surprising guests from the hallway. In this collection you can see some interesting ideas for unusual shelves for shoes .

Schemes and drawings of shelves for shoes

A shoe rack is not a wardrobe or a sofa, it is easy to make it yourself. It's much easier to do this if you already have finished project . Of course, you can draw a sketch yourself if you have experience in this matter, but it’s easier to use ready-made schemes, why reinvent the wheel.

For example, according to this scheme, making a cabinet for shoes is not at all difficult

There are many types of shoe shelves - the main ones include Bona, Slim, Coupe, Stand, or a shoe cabinet - a shoe cabinet.

For the manufacture of some of them, various mechanisms are often needed, but today it is not a problem to buy any accessories in a furniture store. Often to save space use shelves "slim", although they have design features, but if desired, such a shelf can be made independently. Of course, it is quite difficult to make it yourself, you have to buy a lot of different accessories. It's easier to buy ready-made and assemble it yourself. You can see how this is done in this detailed diagram.

In this collection, you can see schemes various types shelves If you have experience with wood structures, these drawings can help with proportions and dimensions.

Save space !

When planning the interior of hallways, one problem most often arises - not enough space. To save some space, you can go for different tricks, for example, here is one of the ways, though only for women's shoes with thin heels. This feature of women's shoes can be used. At a distance of 5 centimeters, attach a long handrail to the wall and the shoes will be held solely by the heel.


If such an original shelf is beautifully decorated, it looks very original

from beer diy for shoes

Let's look at how to make a shoe rack (rack) from beer glass bottles with your own hands. If you already have four beer bottles (or champagne) and two boards, then consider that you have already done half the work. Of course, in addition to this, you will also need inexpensive fasteners that can be bought at almost any hardware store.

Choose beer bottles with a long neck.

Boards for shelves are sanded and covered with dark varnish.

Surprisingly, these glass bottle shoe racks are durable because they can support the weight of an adult.

By placing one such shelf on top of another, you will get a shoe rack made of glass bottles.

See step-by-step photos of the master class:

The source of the photo could not be established (((

250+ photos

We learn about the huge variety of shelves for only when we start looking suitable option milking your hallway. Closed and open, one, two and I don’t know how many tiered, hanging, floor, wall - in general, very different. For an idea, check out this gallery

And these are just a few of the options.

How to save money and make an original stand for shoes with your own hands - find out here!ideas, helpful tips, instructions for making.

We make a stylish stand for shoes with our own hands

A beautiful shoe rack can become not only a place to store shoes, but also a full-fledged element of the interior of the hallway. The choice of options in stores is extensive, but the cost is often too high. To make a capacious and compact shoe rack that fits perfectly into the look of the corridor, you need to make a little effort and imagination. Consider options for making shoes from available materials with your own hands.

Varieties and purpose of homemade shelves for the hallway

Before installation, it is necessary to make a measurement of the space where it is planned to put a shelf for shoes. For a small hallway, a narrow (20-30 cm) and high shelf would be ideal; in a more spacious room, a closed cabinet with a width of 60-90 cm will look good.

Should the shelf be closed? If you want the hallway to look more aesthetically pleasing, this is a good option. Do not forget to regularly ventilate a closed shoebox, otherwise you cannot avoid unpleasant odors. Also, this problem can be solved by installing a lamp inside for drying and disinfecting shoes.

The advantages of homemade shoe racks are obvious:

• you can use eco-materials;
• the cost of a homemade shoe rack is several times less than in a store;
• you can make a shelf for the hallway of a non-standard layout.

The design of the shoe rack directly depends on its purpose and the number of residents. Here are some popular and practical options:

Shoe rack design	Description
classical	Shoe shelves of this type are popular because of the simple and convenient installation. May have a conventional rectangular or asymmetric design.
suspended	The shelf is attached to the wall with rails, belts or cables. Conveniently folds if necessary (for example, if you need to carry furniture into a narrow corridor).
corner	Fastening is carried out on adjacent walls. Great space saver.
floor	Support in this design falls on the floor. Suitable for spacious hallways, but can also be compact if the sections are distributed not in width, but in height.
Closed	This option looks more aesthetically pleasing. Doors can be made of plywood, frosted glass.
Cassette	Shoes will be stored vertically here, on the door there are 2 or more cassette-type drawers that slide out when opened. Well suited for a small corridor (width 20-25 cm).

There are many options for making shelves. The interior can be decorated with shelves made of metal, in particular aluminum, processed clay shelves, dense oak, glossy plastic look very nice. The material of manufacture can be any, as well as the configuration of the elements. According to the type of installation, shelves for shoes can be conditionally divided into several types.

Materials and tools for making shelves

The service life and ease of use depend on the material chosen for the manufacture of the shoe rack. For example, making a shelf out of a cardboard box is easier than a lung, but it will not last long either. But, as a temporary option, it will work fine.

When choosing wood as a material, it is worth taking care of the final processing of wood with varnish or paint in order to make it attractive. appearance preserved for a long time. A universal set of tools, due to the nature of installation and material, does not exist. But you will definitely need the following tools:

• electric drill;
• glue;
• simple pencil;
• sandpaper;
• fixing accessories;
• screwdriver;
• wood saw;

You will also need varnish or paint, the color of which is selected for the overall interior of the hallway.

How to make a shelf with your own hands

Before starting work, it is worth drawing an approximate layout of the future product, where you also need to specify the dimensions. After that, they start marking on the material, where they indicate the location of the fasteners (if any), the required length and width. Here are a few useful advice:

1. When creating a simple shoe rack, you can do without the use of metal fittings - all elements are fastened with self-tapping screws.
2. Doors are easy to install if you use canopies.
3. The processing of materials with varnish or painting should be carried out before assembly. If you do this after, the layer will be uneven, and the procedure itself will be problematic. The process of assembling a shelf for shoes depends not only on the design, but also on the complexity of processing the material, the features of working with it.

wooden shoe rack

First of all, a shoe rack should have small dimensions, but at the same time contain a sufficient number of pairs of shoes. This is its essential feature. There are many materials from which this structure can be built, but the main one is wood. Unlike chipboard and MDF, it will not stick or swell when exposed to moisture. To do this, the tree should be varnished or painted.

What will be needed?

The basic set for manufacturing: wood, glue, screws, glazing beads, varnish or paint. Of the tools you will need: saw, screwdriver or screwdriver, hammer, sandpaper, drill. Glazing beads, self-tapping screws, drill are selected in accordance with the size of the structure. Self-tapping screws need to choose small, but able to firmly gain a foothold in the structure. It must be remembered that the tree can crack or split if the size of the screws is not chosen correctly.

Construction assembly

In depth, 35 centimeters will be enough. This distance is enough to accommodate almost any shoe. This will be the length of the sides of the structure. You need to saw off 6 elements of 35 cm each. You can determine who in the family has the largest shoe size and measure the distance along it, leaving 1 cm in stock. Then you need to distribute 4 bars on one of the elements and wash down to the depth of the bars. It is necessary to arrange the bars evenly.

Each shelf should allow you to place 3 pairs of shoes, so its length must be determined from the calculation of the 3 largest pairs of shoes in the family. 4 blanks of this length will go to each shelf. To connect the elements, it is necessary to cut out recesses. These places must be fastened with screws. For a more aesthetic look, you can drill holes and use glazing beads and glue that will withstand shoes without any problems. This operation is similar for each shelf. After that, sand the tops of the sidewalls with sandpaper.

Any height can be made, but a reasonable limit is not higher than 80 cm. High shoes should fit in one of the compartments of the structure. The distance between the shelves (between the floor and the first shelf) should be 30 cm. All connections are made in the same way.

Practical shoe rack made of chipboard

To make a simple shelf for shoes from chipboard, you need to take two sheets of canvas (dimensions are determined based on the space in the hallway). You will need a sheet of fiberboard for the back wall. The assembly algorithm is simple:

• We attach the bottom and the shelves themselves to the two side walls. A drill is used for screeds (drill 8 mm), a drill with a diameter of 5 mm is used at the end.
• The folding element is fixed with medium-sized screws;
• The upper part is mounted on self-tapping screws 4 * 30;
• Shelves are mounted inside;
• Fix the back wall of the product.
• This is a budget and uncomplicated option, which can be used for any layout of the hallway.

Beautiful laminate shoe rack

If after the repair of the apartment there is an unused laminate, you can make a stylish and compact shelf out of it, which will organically fit into any design. For manufacturing, you will need laminate sheets, the number of which depends on the tiering and metal pipes with slots. They can be made with a grinder for metal. If desired, the structure can be made of any height; for safety, the edges of the tubes are sealed with plugs.

From profile

An interesting option are shelves for shoes made of profile and tempered glass (or wood). For manufacturing you will need the following tools:

• glass cutter;
• jigsaw;
• Bulgarian;
• level;
• electric drill for metal;
• screwdriver

You can use a regular color profile or galvanized, the second option will be more reliable, as it is resistant to moisture.

Step-by-step instruction

• The profile is fixed to the wall with one self-tapping screw;
• With the help of the level, the horizontal markup is checked;
• Screw in the remaining screws;
• The frame is assembled;
• Already cut shelves are attached to the frame.
• This option will look good in Hi-Teck design.

Simple shoe rack made from boxes

The proposed design is capable of withstanding big weight, despite the fact that cardboard is a fairly flexible material. For its manufacture, it is desirable to use boxes from household appliances. Depending on the height and width, take the required number of boxes. The structure is attached with glue, adhesive tape, a stapler or in another way. The finished shelf can be decorated as fantasy tells. There is one drawback - such a shelf is suitable only for summer shoes.

Corner shoe rack

Most suitable material to create a corner wooden shelf for shoes - larch. It tolerates moisture well and is easy to use.

To begin with, we determine the size and design of the shelf, draw a diagram and calculate the required amount of material.
To create a corner shelf, the following materials and tools are needed:

• two boards up to 2 m long (the ends of the boards can be rounded or cut in a wave);
• shelves cut from the same board (in this case, the shelves can be cut different sizes and forms)
• jigsaw for sawing;
• planer and sandpaper for leveling;
• corners and self-tapping screws for connecting parts;
• level to check the accuracy of the design;
• antiseptic;
• varnish or paint.

Boards must be sanded and treated with an antiseptic, varnished or painted. Varnish is chosen if you want to emphasize the naturalness and structure of wood, paint - if you prefer saturated colors and when deciding to use special design techniques with a play of color.

Construction connection

To create lightness of construction, the two main boards are not attached to each other: they are set at an angle and connected using shelves. First, the lower shelf is attached, then the upper one, the structure is installed vertically and its evenness and stability are checked. Then the rest of the shelves are installed.

The space between the shelves must be sufficient, otherwise there will be a feeling of tightness and congestion.

decorative elements

For additional decoration of the shelf, you can use thin decorative slats, sawn out on your own. Or purchase a decorative wooden lattice-partition, and after sawing it, decorate the shelf by adding carved limiters.
The use of decoupage or aging techniques in painting will also bring a fresh touch to the interior of the hallway. Bright color solutions may be relevant to complement the interior.

Making a carousel shelf

The carousel shelf takes up little space and at the same time is able to accommodate many pairs of shoes. For its manufacture you will need: fiberboard, metal pins and self-tapping screws.

How to do

Workpieces are cut from fiberboard in the form of circles and quadrangles. With the help of a compass and a rail, markings are made for the pins.
Disks for stands are fixed with disks of smaller diameter, which are placed at the desired height.

The bottom is prepared, on which quadrangular blanks are attached, attached with a corner. The bottom circle is conditionally divided into 3-4 parts (a place for 3-4 pairs of shoes on the "floor").

For the manufacture of a shoe shelf, you can connect your imagination and then the most unexpected solutions come to mind. Here are some ideas that will be of interest not only to self use but also as a gift for loved ones.

On the video: do-it-yourself shoe rack from an old closet

Regardless of the size of the hallway, everything in this room should be organized as comfortably as possible. Of course, you should definitely buy a special wardrobe for outerwear. At the same time, for shoes, a shelf would be the best option. With its help, you can not only properly organize the space in the hallway, but also save the space you need for storage.

Do-it-yourself shoe racks: main advantages

Of course, there are many options for storing shoes, but nevertheless, classic shelves still remain relevant. This is because they have a number of advantages. First of all, it is the cost of such products. Of course, the design design can have an impressive price tag. But do not forget that you can make a shoe rack with your own hands. This is a great alternative for budget savings.

It should be noted that in interior design it is very important to select details similar in style. Only in this case, the room as a whole will look harmonious. The same goes for the shoe rack. If you plan to do it yourself, then it will be possible to take into account all the nuances, including color scheme and even the shape of the structure. For example, lovers of Provence style should pay attention to wood as the main material. In a minimalist or high-tech room, designs made from modern materials will be much more appropriate.

If you wish, you can use only environmentally friendly and safe materials in the creation process. After all, you yourself will purchase them in a specialized store. In addition, the shelf can be made not only classic, wooden, but also metal or even cardboard. It all depends on your personal preferences and financial capabilities.

Undoubted advantage independent work is the opportunity to carefully consider all the details. For example, a shoe rack will be open or closed. You can also make fewer or more additional compartments. All this is very important, especially if the hallway is not too large.

Unusual cardboard shoe rack

Standard boxes take up quite a lot of space. Therefore, we propose to transform them a little and make an unusual shelf for shoes with your own hands. Unlike the classic version, in this case it will be possible to store much more pairs.

First, cut the boxes into squares of the same size. We also make two folds at an equal distance on each workpiece.

On the front side glue a piece of adhesive tape of a bright color.

We fold the cardboard blank along the folds and fix it with adhesive tape on top.

In the same way, we make several triangular blanks and put them in a row. Glue together with adhesive tape, and put a suitable sheet of cardboard on top. On top we place another row of blanks and a sheet of cardboard. The number of rows depends only on the desired height of the shoe rack.

In this embodiment, one piece of shoes can be placed in each triangle. If desired, you can make blanks of a larger size so that a whole pair fits in them.

In any case, such a shoe rack looks fresh, bright and unusual. Therefore, it will definitely not go unnoticed by your guests.

Pallet shoe rack

Increasingly popular every year unusual furniture and decor items made from pallets. It would seem that a simple transport material, but nevertheless, a lot can be made from it, even a shoe rack.

Necessary materials:

• pallet made of wood;
• Sander;
• sandpaper;
• dust mask;
• waterproof primer for wood;
• gloves;
• stain or paint;
• brush;
• soft rag;
• Matt lacquer;
• brush.

If necessary, clean the pallet from dust and dirt. After that we process it sandpaper to remove the irregularities. We brush off all the dust with a brush and wipe the pan with a damp cloth.

We apply a primer to the entire surface of the pallet. This is necessary in order to protect it from moisture and prepare it for painting. After complete drying, apply a thin layer of paint and leave for several hours.

We cover the pallet with a matte varnish. After drying, you can apply a drawing or text using a stencil, paint and brush.

If desired, the top of the shelf can be decorated with stones, plants or other decorative elements.

Bench-shelf for shoes

If desired, even old things can be transformed and given a second life. In this case, we propose to convert a simple bench into a more modern design for the hallway.

The process will require the following:

• bench with shelf;
• dye;
• brush;
• batting;
• foam rubber;
• furniture stapler;
• upholstery fabric;
• buttons (optional)
• hammer.

We paint the surface of the bench with black paint and leave for several hours until completely dry.

Cut off a piece of foam rubber based on the size of the bench. Keep in mind that the size must match perfectly.

We put a rather large piece of batting on the work surface. We place foam rubber on top and put a bench on it. We stretch the batting and fix it with a construction stapler.

This must be done especially carefully so that there are no extra folds on the surface.

Place on the work surface upholstery fabric, and on top of the bench. At this stage, do not rush so that the main fabric is as even as possible, without creases and well stretched. We fix it with a stapler.

Best of all, the corners look if they are wrapped in the form of an envelope. If desired, the bench-shelf can be decorated with black buttons.

I remembered the famous number from KVN about the married couple Igor and Lena. Lena has a lot of shoes, she occupied a whole closet with them. Igor begins to empty the shoeboxes and hilariously resents the irrationality and extravagance of his wife. The hall laughs, the men applaud standing. At the same time, Igor himself has one pair of shoes for all occasions. At the end of the number, sitting peacefully next to his wife, the husband utters the catchphrase:

I realized how many pairs of shoes a woman needs to be happy.

How many?

One more than she has.

To which Lena replies:

What instructive conclusion can be drawn from this story? You need to properly and accurately store your shoes, and then no one will find out how much you have and why you need it in such quantity.

Now we will focus on the problem of storing wearable shoes, in other words, we will tell you where to hide a bunch of shoes, slippers and boots from the corner of the hallway. Simple and rational decision- place on the shoe shelf. The option of buying this piece of furniture in a store only at first glance seems simple. Such a small-sized thing is not so easy to find, as a rule, it comes with a set of furniture for the hallway. Separately, it is not always possible to find something suitable in size, design and wallet. But you can always do it yourself.

And here fantasy and skills gained in labor lessons come to our aid.

There are many options, let's look at some of them.

How to place shoes at home

First, you need to decide what you want from, and most importantly, you can make a shelf for storing shoes. Different materials can be used for this, each of them has its own disadvantages and advantages. A PVC product will be light in weight, easy to care for, because it can be safely washed, but in order to work with it, you need a tool and skill. A tree is good for everyone, except that to work with it you need a tool, a place, and at least elementary knowledge of carpentry. It is easy and convenient to work with cardboard, but during use it can be deformed from pressure and moisture. Look at the proposed options and decide which side you are on.

Shelf for shoes "woodpile" made of PVC pipes

This option is suitable for placing home, summer and demi-season adult shoes or for any children's shoes. High boots will have to be put separately.

1. Acquire sewer pipe made of PVC, 30 cm in diameter.
2. We cut with a hacksaw into sections 30-35 cm long, depending on the maximum shoe size in the house. A length of 30 cm is enough for a size 42. If you need more - attach the boot to the pipe and measure the required length.
3. We process the edges with fine sandpaper so that they become smooth.
4. Since the shelf is called a woodpile, we glue the pipe sections with wood-like wallpaper. If such a design does not fit into the overall concept of the hallway, choose another pattern that is more suitable in style and color.
5. Four blanks are glued together with epoxy glue bought at a hardware store. We fix the row with clothespins, pliers or special clips, if any.
6. In the same way, we make two more rows of three blanks in each.
7. Let's make a reservation that one of the many options for combining structural fragments is offered here. At your request, you can assemble a rack for shoes of a different shape and size. There can be as many sections as you like, up to occupying the entire wall with them, if it is functionally justified (getting shoes from a great height is inconvenient, but you can place non-seasonal or rarely used items there).
8. We assemble a “woodpile” of three rows of cells in the following order: at the bottom and at the top there are rows of three sections, in the middle - of four. We put it against the wall.
9. Voila, the original shoe rack is ready.

The Woodpile rack is good for everyone, but it would hardly suit Lena from KVN. After all, you can put exquisite stilettos there, but somehow not comme il faut. Especially for Lenin studs, there is a mega simple version of a shoe shelf called "Cornice"

Photo: Storage option "Cornice"

Shoes with heels are conveniently placed on the ledge Unusual use of a cornice as a shelf for "hairpins" Any cornice is suitable for playing the role of a shoe shelf You can organize a whole shoe rack by attaching several cornices under each other

1. We take any window cornice, cut off a part of the desired length.
2. We attach the cornice to the wall.
3. We cling shoes with heels to the eaves and hang them up. It turns out a witty shelf for your favorite heels.

Do-it-yourself wooden shelf "Bristles"

You need to work a little more on the manufacture of this shelf than on the previous two.

It is made from plywood and shoe brushes.

1. The first thing to determine is the length and width of the future shelf. In order to calculate the length as accurately as possible, you should take into account the parameters of the plywood and the number of brushes that you intend to place on this plywood. The width of this part of the shelf should be 5 cm more than the width of the brush.
2. Having decided on the parameters, we cut out 2 identical blanks.
3. We connect them together with a "book" as shown in the picture.
4. We drill holes on the long part of the shelf at a distance of 1 cm from the edge. We attach the second board to the end and with the help of screws we connect the two fragments. On the sides we attach a square of the same width from the same plywood.
5. If the brushes have handles, cut off the handles. Align the cut edges with a file.
6. We drill holes in each brush on both sides. Attach the brushes to inner surface shelves bristles outward as shown in the photo. The first part of the shelf is ready.
7. For the second part, we take a sheet of plywood and make it the same length as the first, and 35–40 cm wide, depending on the big size shoes in the house. Width 35 cm is designed for size 43 shoes.
8. We saw off another plank of the same length, 15 cm wide.
9. We attach a small board to a large one with screws so that we get a side (drill holes in a large one 1 cm from the edge, attach a small end and drive the screws into the holes on one side and into the end of the board on the other side).
10. On the side opposite from the side, we drill 3 holes closer to the corners of the large board as follows: one hole on the long side, two on the short side. The distance between the holes depends on the width of the first part of the shelf with brushes inside. Suppose the shelf width is 15 cm, then we make holes at a distance of 2.12 cm from the corner. On the long side, we indent 5 cm from the corner.
11. Using screws, we assemble a shelf from two blanks.
12. We paint the finished shelf in our favorite color. After the paint has dried, we drill 2 holes in the central board and attach all this splendor to the wall.

By the same principle, you can make a simpler version. In fact, these are just two planks nailed to the wall parallel to each other at a close distance.

Rack for shoes "Carousel"

If there is a person in the family who has the skills of a carpenter, has a tool and a workshop, and at the same time, for some unknown reason, does not know how to make a shoe rack, show him this video. On the screen, everything looks easy and accessible. Just to get started, you need to prepare: a sheet of plywood, nails, wood glue, turntables, paint.

Video: how to make a bookcase from improvised shoe storage

And now, attention to the screen:

Simple production of cardboard pockets "Guests on the doorstep"

Anti-wait cardboard is often used in the manufacture of shoe storage sections. Although it sounds a little fantastic. The video shows how you can make durable and original pockets for storing slippers and summer shoes, armed with only a vacuum cleaner cardboard box, scissors and good glue. Such a thing can easily be done even by the most physically unprepared segments of the population - the elderly, women and children. So get it household appliances out of the boxes and start active browsing.

Another cardboard version of the shoe rack from the “doing with the kids” series.

Shoe rack "Triangle"

We take as a basis all the same carton boxes, whose design potential is as inexhaustible as an atom.

So, we need: cardboard boxes, colored wide tape, scissors, ruler, glue.

1. We cut out a rectangle from cardboard with sides of 45x35 cm, so that even a large boot can find shelter on the shelf.
2. Using a ruler, make 2 folds at a distance of 15 cm from the edges of the long side.
3. We glue the edge of the side from which the folds go vertically with adhesive tape - this will be the front facade of our section.
4. We fold the triangle along the folds, glue it with adhesive tape on top along the edge, and also in several more places along the fold.
5. Similarly, in our case, we make only 13 sections. You can change this number in any direction you like.
6. We assemble the bottom row of the rack from four sections. Glue together with adhesive tape. You can stop there, or you can glue a sheet of cardboard with glue to strengthen the structure, but this will not add elegance to your design.
7. We assemble the second row of five modules, fasten them together and glue them with tape to the bottom row. Etc.

Attention! The peculiarity of cardboard structures is that it is impossible to store wet and dirty shoes in them.

Nightstand for shoes "Magic box"

Do you live near a grocery store and are you annoyed by the warehouse of boxes under the windows? Your husband bought a case of beer and now you have a drunken man, glass containers and an empty box in your house? Then you're in luck! Turn a drawer into a nightstand or shoe rack, because physical labor calms the nerves!

You can simply move a plastic box against the wall in the hallway, fill it with rubble and put dirty and wet boots and shoes in it. And also for these purposes, you can use a pallet with sides or a plastic tray.

Several boxes are easily fastened together with a plastic collar or ordinary wire, placed “on the butt”, moved up to the wall, or better attached with the same wire to a pipe or some other ledge, and now we have several sections for storing shoes or something more.

WITH wooden boxes will have to fiddle around a bit.

1. Treat the surface of the box with fine sandpaper.
2. Cover with paint.
3. Hang on the wall.

Similarly, you can adapt a wooden pallet.

For residents of small apartments, the issue of the location of shoes in the hallway is very acute. Families with children know what shoes are scattered throughout the apartment. The problem is no less relevant for those who like to pick up a variety of accessories to their image. To keep order in your home and conveniently arrange each pair, it is not at all necessary to buy expensive shelves from the range furniture stores. Craft convenient devices for storing shoes can be from available materials, if you show imagination. Here are some examples for inspiration.

Simple wooden cabinet

Such an interior item is quite simple to make. Four boards are connected to each other with furniture screws. Thin wooden planks are attached to the facades of the pedestal. For coloring, water-based paint is best suited. If desired, the upper part can be made contrasting and adapted for sitting.

You can just hang shoes on a shelf!

The idea is ingenious in its simplicity. In order not to stain the floor with the dirty soles of boots and sneakers, you just need to keep them hanging.

Wooden pallet shelf

What is not made from such an affordable and practical thing as pallets. They are also suitable for making shoe racks. To build such a piece of furniture is quite simple, because for the hallway of the pallets can be left unprocessed.

Staircase instead of shoe cabinet

For this idea, it is suitable as a finished one. wooden staircase, and made independently from planed boards. The main thing is that the steps should be inclined so that the shoes do not stain the wall.

Rack of boxes

Wooden boxes are another universal remedy for lovers original furniture. When placed vertically, the drawers are suitable for storing tall autumn and winter shoes. The side surface can be adapted to store keys, hoopoe accessories for shoes and other useful little things.

Shelf for shoes of different heights

In spring and autumn, the weather is very changeable, and shoes for almost all seasons can be relevant. Such simple design with shelves of different heights allows you to store autumn boots next to sandals and sneakers.

Bee hive

A very original design can be created by combining several wooden hexagons, each of which is suitable for storing one or even several pairs of shoes, depending on its size.

Shelf with French chic

An ordinary piece of furniture can become a real decoration of the hallway if you stick a special film or paper with printed text on the back of the shelf. The color for the shelf itself with this design is better to choose a neutral one.

Skateboard shelves

Real skateboarding fans always have a few old boards that have fallen into disrepair. In extreme cases, you can turn to your hobby buddies for help. Multi-colored shelves are great for storing sports shoes.

Shoe organizer

The design of the shelves of different heights allows you to store shoes for different weather. A small mirror in the hallway will allow you to evaluate your image before leaving the apartment.

Farm bench

It is very convenient to store shoes in closed boxes located on the shelves of a rustic bench. This method of storage gives the hallway a neater look, since the shoes are hidden from view.

Wall-to-wall shoe cabinet

So that the design does not seem cumbersome, it is better for it to choose boxes made of thin plywood and arrange them in the form of brickwork. The strength of such a locker is ensured by a wide board, to which individual shelves are attached.

Diagonal shelves

By placing the usual wide shelves diagonally, you can significantly save space in the hallway.

Copper pipes

The original piece of furniture is easy to make from the pipes left after the renovation of the bathroom. To attach the parts of the shelf to each other, special adapters from the plumbing store are suitable.

Dynamic Design

Bars of the same size are attached to the wall using special movable corners. When folded, the design is a decorative panel, and if necessary, turns into a space for storing shoes and accessories.