How can you make a simple and convenient laundry organizer with the help of improvised means? Do-it-yourself underwear organizer is a convenient device for storing underwear, handkerchiefs! How to make your own laundry box.

23.06.2020

To prevent small items from rubbing in the closet, it is better to store them in separate boxes or drawers. Organizer for socks and shorts - a convenient device for underwear. With it, you can organize all the "small things" and distribute them by color, so that it is more convenient to search for the right thing.

What are laundry organizers?

You can make a do-it-yourself laundry organizer from fabric, plastic, wood or cardboard box.

Organizer for panties and socks significantly reduces the time to look for a pair or the right set. In addition, it allows you to maintain order in a closet or chest of drawers. Such a device will allow you to separate linen and organize children's, women's and men's.

laundry organizer

Organizers are divided into several classifications:

According to the type of material from which they are made:

plastic ones cannot be made on their own, but ordering on the Internet is easy (on the aliexpress website you can find hundreds of different organizers made of polymers);
wooden ones can be purchased ready-made, which are put into the drawers of the chest of drawers, or you can make it yourself if you have materials and necessary tools;
cardboard can be made from boxes or cardboard foxes;
fabric - sewn from a dense material, often from jeans.

wooden organizer

According to the type of mounting installation in the cabinet:

vertical (suspended) - installed in a closet and made of fabric or dense polyethylene, based on hangers for ease of placement;
horizontal - most often made of cardboard or ready-made cells are bought in a closet.

Note! If you sew an organizer from old jeans, it is recommended to boil them in boiling water beforehand so that they do not shed.

Vertical organizer

What you need to make your own hands from fabric

To make a sock organizer with your own hands, you will need the following materials and tools:

cardboard boxes or large sheets of cardboard;
fabric (you can shreds);
glue, it is better to use a silicone gun;
wallpaper or sheets from magazines to decorate the organizer;
ruler and pencil to measure and mark everything evenly.

DIY tights organizer can be made from a shoe box. Also suitable boxes from under household appliances. The main thing is that there is a base in which cells for linen will then be installed.

The number and size of the cells are prepared at will. You can store one thing in each compartment, or arrange them by color. For example, white panties will be stored in one cell, black socks will be stored in the second, and so on. For small children, it is better to put one thing in each cell, so that it is more convenient for the baby to take clean linen on his own, without outside help.

How to sew a do-it-yourself laundry organizer from fabric

You can not buy an organizer for tights, panties and bras, but do it yourself. This has some advantages: firstly, you can build a structure of the desired size. Secondly, improvised means are used and there is no need to spend money. Thirdly, a homemade organizer can be decorated as you wish, made in any color.

Fabric organizer

Laundry organizer (36×36×8 cm) is made as follows:

First you need to make a drawing in order to correctly calculate the length of the strips. For example, the organizer will have 8 cells 9 × 9 cm and 4 cells 8 × 18 cm (it is convenient to use for storing bras. The length of the overall structure will be 36 cm, due to which it will be convenient to place it in a dresser or wardrobe drawer.
When the project is drawn, it is easy to calculate how long the partition strips should be. The first partition is attached from the corner to a square cell 9 × 9 cm, which means that it should be 18 cm long, taking into account the allowance - 19 cm (0.5 cm on each side). In this way, all partitions are calculated and the necessary strips are cut out of dense fabric (their width should correspond to the height of the box (in this case, 8 cm).
Next, you need to cut the fabric on the outer walls of 4 pcs. 36 × 8 cm, taking into account the allowance. And the fabric at the bottom according to the size of the overall design is 36 × 36 cm. For allowances, 1-1.5 cm are enough on each side.
Next, you need to cut out the bottom and side walls from thick cardboard, which are inserted into the prepared sides for density (or the cardboard is sheathed or pasted over with a cloth - as it suits you).
Strips for partitions are sewn together and processed with an oblique trim.
Then the side parts are sewn together, into which cardboard is immediately inserted as a sealant and the bottom. You can make secret locks so that the cardboard can be removed and the cover washed.
The last stage is the connection of the structure to each other and its decoration. You can use lace, beads, bows, stickers - as long as your imagination is enough.

Cardboard blanks

If it is planned that the organizer will stand in a chest of drawers, you can not decorate it from above, since it will not be visible anyway. If it will be installed in the bedroom or in the bathroom (that is, in plain sight), then it is better to make a box with a lid and decorate it so that it fits organically into the interior.

You can make the organizer in another way, in which the frame is already made with finished boxes. The work of the master is to sheathe or paste over with a cloth, assemble it into one design and decorate it. In order not to waste time and effort on mounting cardboard, you can use narrow boxes of milk, baby food or cereals (such as Hercules). If there are none at hand, then you can take sheets of cardboard and make square or rectangular dividers yourself.

Preparation of a fabric partition

How to sew a laundry basket out of fabric

A fabric laundry basket is placed in a closet or chest of drawers. To store dirty laundry, it can be installed or hung in the bathroom for ease of use.

fabric basket

To make a basket, you will need to prepare the necessary tools and materials in advance:

In order for the basket to keep its shape, it is better to use a dense fabric, such as calico or bike, because fabrics like satin are thin and the basket will deform.
A ruler, soap, chalk, synthetic winterizer, needles for connecting fabric will come in handy.
The pattern is made square or round as desired. Depending on the pattern, then you need to measure the length and width of the fabric and cut out the blanks.

The basket can be soft and shapeless or dense. In order for it to keep its shape, you need to use a dense bottom or sew several metal rings into it (for a round basket). For square structures, you can use rods that are sewn in at the corners and allow you to keep the shape, especially if the basket is high.

This design can be used to store dirty laundry before washing, clean before ironing, to store towels or bedding, or for children's toys.

The simplest basket option is based on a finished cardboard box. You need to pick up a basket or box of the desired size, measure it, cut out the sides and bottom and glue them onto the finished frame. From above, the basket can be decorated with buttons, inscriptions, rhinestones and other accessories.

Folding basket

It can be used for linen, towels, bedding or for dirty clothes as a linen basket. When gluing fabric to cardboard, it is better to use silicone glue or a gun. It is plastic, connects materials well and does not sag when high humidity(unlike PVA glue, for example).

More complex basket options can be made on the basis of any materials:

Wooden rods. To make such a basket you will need wooden slats 4 pieces, 60 cm long, 2 tubes of 40 cm, and 2 of 35 and fasteners - bolts and nuts. Next, a frame with legs is made from the rails, to which the fabric base is then attached. In appearance, it resembles a large bag with loops and is attached to the frame. If necessary, the structure can be folded, and it will take up a minimum of space.
On the plastic frame. To do this, you can take as a basis a clerical urn (basket) made of plastic. Next, strips are cut out of the fabric, 3-5 cm wide and sheathed (pasted) around the basket. Inside you can put a sewn bag for linen.

Wicker boxes and baskets are often used on the farm to store linen. They can be left in their original form, or decorated with a cloth for beauty. When using boxes, you can make organizers divided into several sections. Their size depends on the purpose: for bath accessories you need to make larger compartments, for underwear - smaller.

hanging basket

Another option for a fabric basket is a hanging basket. In fact, it looks like a regular bag, only made of fabric. It can be closed with a lock, a button or not closed - as desired. The whole idea of such a basket is to mount it on the wall to save space. More often, such designs are used for dirty linen and hung in the bathroom or pantries.

In the end, it can be noted that many are wondering how to sew a do-it-yourself laundry organizer out of fabric or glue it out of cardboard. In fact, it's simple: you need to prepare a project, calculate the required dimensions, prepare materials and do it. Patterns and step-by-step instruction steps will depend on the model, size and type of organizer or basket.

Drawer organizer

You can buy ready-made organizers, or you can turn on your imagination and make original trays for small things - panties, socks, belts, etc. from improvised materials on your own.

Organizer- an irreplaceable thing in the house for storing not only every little thing, but also some valuable things. Such a convenient and necessary little thing can be purchased at any supermarket.

Or you can turn on your imagination and do it yourself. And we will help you create an organizer for any occasion.

How to make an organizer with your own hands?

Making a box for storing all sorts of things is not difficult even for a beginner. You will need material, stationery and a little time.
Materials for organizers of things are usually created from improvised things, from things that go to waste or in rare cases, the necessary components are bought.

A small organizer for hairpins and elastic bands with your own hands for beginners

Surely, more than one girl has experienced the mess in her hair accessories. There are a lot of them, but they are not always in place. So, in order to put the elastic bands with hairpins in a decent order, you need to put them in one place. The place should be beautiful and comfortable.

You will need:

Frame;
ribbons;
hooks;
glue;
scissors;
ruler;
cardboard.

Working process:

Measure your photo frame and cut the ribbons to size. Stick with reverse side with a gap of 3 cm.
Then measure a sheet of cardboard and cut it to fit the photo frame, glue it over the ribbons on the back of the frame.
Glue the hooks on the outside of the frame, positioning as you please.
Now you can hang the photo frame on the wall or put it on the table.

DIY office organizer

To find a pen, some need to search the whole house and turn everything upside down. But if you have a stationery organizer, you won't have to go far looking for pencils and pens.

You will need:

cardboard;
pencil;
tourniquet;
6 cans;
paper;
scissors;
glue;
paint in a can;
ruler.

Working process:

Glue the jars with glue and cover with paper.
Make a handle as in the photo and wrap it with a tourniquet.
Then paint the jars and leave to dry.
Make the jars in pairs, inserting the handle in the middle, wrap everything with a tourniquet.

DIY underwear organizer: step by step instructions with photo examples

The creators of furniture for things did not think about how they would be stored there. And in most cases underwear suffers. Few people fold their laundry neatly at all times. Therefore, you can use a little trick and add a linen divider to the closet.

You need:

shoe box;
glue;
scissors;
ruler;
stationery knife;
pencil;
paper for decoration.

Working process:

Measure the height of the cabinet where you want to place the organizer. Cut according to size.

Determine how many cells you need and measure them to fit the box. Cut out the partitions.

Checkout inner surface storage box.

Checkout appearance organizer.

You should end up with a beautifully decorated box on all sides.

Determine the size of the cells and make cutouts on the partitions on one side. The number of cuts affects the size of the cell, the more of them there are less space for storage.

Decorate the partitions by pasting them with paper on all sides.

This is how easy it is to make a box for storing clothes.

DIY cosmetics organizer

Don't have time to buy a decent cosmetic bag for your beauty arsenal? Or do you have so much of it that the toilet bag is breaking? Then a magnetic board for cosmetics will help you.

You need:

large photo frame;
magnetic sheet according to the size of the photo frame;
small magnets for each beauty item;
paper for registration;
glue;
scissors;
ruler.

Working process:

Measure the inner perimeter of the frame and cut the magnetic sheet along it.
Do the same with the design sheet.
Put a decor sheet in the frame, then a magnet and close everything with a frame lid.
Glue magnets to all makeup items.
Hang in a convenient place.
The organizer is ready, now you won't lose anything and everything will always be in one place.

How to make a handy jewelry organizer?

There are never too many decorations, you just need to find a capacious storage for them. A variety of boxes take up a lot of space, and besides, decorations are sometimes confused in them. Therefore, we offer you an alternative option for storing jewelry.

You will need:

frame;
metal grid;
pliers;
paint in a can;
furniture stapler and staples for it;
hooks.

Master Class:

Place the mesh on the back of the frame and secure with a stapler. Trim off excess tails with pliers.
Turn the frame over and paint with paint, wait until it dries.
Hang hooks, and you can hang decorations on them. By the way, for some jewelry, hooks may not be needed.

Large shoe storage organizer

Storing shoes in boxes is not always convenient, and often it takes up a lot of space. So why not make one big shoe organizer?

You will need:

plywood;
electric jigsaw;
roulette;
pencil;
wood glue;
the bars are thin;
self-tapping screws;
sandpaper;
iron rod;
iron mechanisms for scrolling;
dye;
drill.

Working process:

Cut out circles from plywood sheets, choose the number of circles according to the number of pairs of shoes.
Finish the edges with sandpaper.
Cut out partitions from the bars for each section of the cabinet. Count that for one you need 6 pieces.
Make a hole in the center so that the cabinet turns.
Assemble the cabinet: plywood circle + crossbeams + plywood circle + iron mechanism and so on, repeating the steps.
Insert a rod through all departments.
Build a stand for the organizer and place the box on it.
Paint the organizer, wait for it to dry, and put your shoes inside.

Headphone organizer

Often the headphones are lying around and confused. This is very unpleasant and takes a fair amount of time to unravel. Therefore, we have prepared an interesting life hack for you so that your headphones are always in order.

Prepare:

funny pictures 2 pcs;
paper;
glue;
scissors;
double sided tape.

Course of action:

Cut out the pictures.
Prepare a 5x10 piece of paper.
Fold the paper in half and glue the picture on each side.
With inside Secure the top with double sided tape.
Now you can wind your headphones and not worry that they will get tangled.
You can replace paper with felt, and use buttons as fasteners.

Do-it-yourself organizer for small things: ideas with photos

To organize a trifle in one place, it is enough to create an interesting place to store it. Then she will always be at hand. A creative box will fit perfectly into your interior.

DIY folder organizer for papers and documents

Papers, like other work supplies, should be visible and in order. And so that they are always at hand and look good, build a storage folder yourself.

Required tools:

colored paper;
beer cardboard 2 pcs;
glue;
scissors;
ruler;
decorative paper.

Master Class:

Cover the beer cardboard with paper for decoration.
Cut sheets of paper 1 cm smaller on each side than beer cardboard.
Using 2 long pieces of paper, make an accordion out of them. Bend 1 cm, and glue sheets through each span.
Cut the paper for the crust and connect the cardboard, as in the picture in step 4.
Glue the accordion with sheets. Your folder is ready, fold your papers.

DIY craft organizer

Craftswomen-needlewomen have a lot of gizmos that need to be stored somewhere. We suggest you make a box for small items.

You need:

thick cardboard;
glue;
scissors;
pencil.

Working process:

On a piece of paper, draw a future box in a folding form. Draw a handle on top for convenience. On the second sheet, make a drawing of exactly the same box.
Cut out the drawing, fold along the fold lines and glue.
Place them back to back and glue.
Design the box as you like and use it.

Try the option for storing ribbons and ribbons, for this box you will need:

shoe box;
eyelets;
paper for registration;
scissors;
glue;
pencil;
ruler.

Working process:

Cover the lid and box with paper for decoration.
Mark points for future holes with a ruler and pencil.
Attach eyelets.
Lay the tape inside and thread through the holes.

DIY crib organizer

For young mothers, we have prepared a convenient organizer that can be hung on the crib. You can put the most necessary things for the baby in it.

You need:

the cloth;
scissors;
ruler;
threads;
sewing machine;
inlay;
buttons or buttons.

Master Class:

Decide on the dimensions and cut the fabric according to them.
To seal the organizer, cut out exactly the same piece of fabric for the base, fill your future organizer with a thin layer of synthetic winterizer and sew.
Make pockets of different sizes.
Make handles for fastening.
Sew along the edge of the trim, attach pockets and handles.
Make fasteners from buttons or buttons.
Your organizer is ready, use it to your health.

DIY kitchen organizer

The kitchen for every housewife is hers personal account a place where masterpieces are created. Therefore, in order to focus all the tools for creating unique things in one place, we have prepared two organizer options.

For the first option you need:

adhesive wallpaper in 2 colors;
cans of chips (pringles);
scissors;
tape measure.

Working process:

Measure the diameter and length of the can and transfer the data to the wallpaper.
Cut out required size and wrap the jar.
Draw on the wallpaper of a different color a sign of the utensils that will be stored in the box.
Cut out the sign and stick it on the jar.
Put the organizer in a convenient place. Such storages can be made for each group of items.

The second version of the organizer is adapted for interesting storage of cups. For him you need:

small boards;
thick tourniquet;
hooks;
screws;
screwdriver;
staples;
ruler;

Master Class:

Connect all the boards with staples using a screwdriver.
On the reverse side, make a mount and tie a tourniquet.
Screw on the hooks.
And write funny inscriptions with chalk to decorate the board.
Hang the organizer on the wall and hang the cups.

Do-it-yourself car seat back organizer

Some families need car organizers, especially those with small children. Just for such families, we have prepared a master class on making a hanging box.

You will need:

the cloth;
scissors;
sewing machine;
threads;
Velcro;
inlay;
straps;
decor elements.

Working process:

Measure the seat of the front seat and transfer to the fabric of the inside.
Draw the pockets. Then cut out all the components.
Sew the trim along the edge of the main fabric and onto the pockets at the top.
Sew pockets and fastening straps.
Attach decorative elements.
Now your child will not be bored, and things will always be in one place.

Do-it-yourself organizer in the trunk of a car

Sometimes in the trunk everything is upside down. And it takes a lot of time to clean up. But there is an alternative - make a wardrobe for things in the trunk of your car yourself.

You will need:

soft fabric;
plywood sheets;
self-tapping screw;
screws;
screwdriver;
pencil;
roulette;
glue / sepler with staples.

Working process:

Measure the dimensions of the trunk and transfer them to a sheet of plywood to make the bottom. Then make the same cover.
Saw the partitions according to the required height.
Insert one at a time and fasten with a screwdriver.
Cover the cover with a fabric, preferably similar to the one in the car.
Fasten it with a stapler or glue.
Put an organizer in the trunk and fold things.

How to make a hanging bath organizer with your own hands?

An interesting organizer for the bathroom can be made from jars for storing cereals. To create something like this you will need:

board;
jars for storing cereals;
screws;
screwdriver;
iron fasteners of a round shape;
ruler;
pencil.

Work process:

Mark the points on the board where the jars will be attached.

Attach jar holders.

Those who are madly in love with order in everything, including the linen drawer of their closet, simply cannot do without a linen organizer, in which each item occupies strictly its own cell. In the master class, we will show one of the options on how to sew a laundry organizer with your own hands.

The first thing we do is take measurements from the drawer where the underwear will be stored in order to build an organizer pattern. We got the dimensions of the box 75 cm long, 43 cm wide and 13 cm high.

In order to sew a laundry organizer, we need the following:

blue thick fabric;
thinner fabric of variegated colors;
synthetic winterizer;
white wide band for the edges.

Now we are going to sew a laundry organizer.

From a synthetic winterizer and a blue dense fabric, we cut out two rectangles, a little in size smaller dimensions box. We made a cut 74 cm long and 42 wide so that the organizer does not deform.

We sew long rectangles of two colors onto the sintepon rectangle. The length of the rectangles should be equal to the base, while the width should be twice the height of the box. These will be the longitudinal partitions of the laundry organizer.

We sew the rectangles in the middle, then fold them together so that the seam is on the inside, and we get a double partition

We determine the length and number of cells of the laundry organizer, draw the blank.

Attaching large rectangular partitions, we will leave the edges 1 - 1.5 cm unsewn, we will need this in the future.

Now let's deal with small partitions. We calculate their dimensions - we make the width with a margin in the form of allowances for the seams, while the height, on the contrary, we make a little less.

To make the partitions stable, we will make them from double fabric. So, we sew all the partitions and turn them on the front side.

The time has come for the most painstaking work - we sew each small partition in turn on one side and the other. We recommend doing it manually.

And now back to the unstitched edges of the long partitions. We sew the two halves, steam, hide the seam inside and sew again

The top of short and long partitions will be edged with a wide white braid.

Now we can sew the main rectangular walls around the perimeter of the future organizer.

12. Next, sew the edges of the long partitions to the side walls, it is advisable to do it manually - this will turn out both neater and easier.

13. Let's take care of the outer corners of the laundry organizer. We trim them in height, cut off the protruding fabric, if any, and process the corner with a white ribbon. Do the same with the other three corners.

14. And now, finally, back to the large blue rectangle, cut and set aside at the very beginning. This blank will be the bottom of our laundry organizer. We carefully attach it to the padding polyester along the perimeter of the future product. You can sew with any of the seams, we used a zigzag so that the threads from the cuts do not interfere with further work.

Well, in the end, we will process the edges of the already finished bottom with white braid. Pre-sew the braid with a basting seam or pin it with pins so that it is evenly spaced, we pay special attention to the corners - they are the most difficult to work with. After making sure that the braid is located nicely and evenly, we attach it with a machine.

We need a thick fabric (I had a "tick" lying in a chest for 20 years), a 12 mm wide tape and thick cardboard, scissors (). We will make an organizer 36x36cm and 8 cm high. First of all, let's draw it, I decided to make 8 cells 9x9 and 4 cells 9x18. After everything is drawn, we begin to consider how long we need to cut off the strips for the internal partitions.

The first strip consists of the 1st horizontal and 1st vertical partitions of 9 cm each, which means it is equal to 18 cm plus allowances on both sides. How to calculate the rest is shown in the figure. We cut the strips 14 cm wide so that when folded they are 1 cm less than the main width of the organizer. With the help of the marker () we immediately make a markup, according to which we will stitch them together.
So, we need to cut:

Now we sew them according to the markup

We sew parts of the inner walls between the partitions, so that there are 0.5 cm from the top and bottom from the edge of the partition to the edge of the wall.

We sew the outer walls and trim the upper edge with tape

We sew the bottom and trim along the edge with a ribbon, if you want the organizer to fold, sew a zipper into the bottom diagonally from corner to corner.

Now we insert strips of cardboard into the walls and sew the corners again, trimming the edges with tape

Here is our organizer

I hope my master class was informative enough and you liked it. Good luck with your needlework!!!