How to make wheels out of cardboard to drive. How to make paper wheels

Gluing wheels for paper cars, rollers for tanks, and any cylindrical parts is not entirely easy. Usually there are a lot of them and there are a lot of valves on them, which have to be cut out for a long and tedious time. In this article, we will talk about one of the gluing methods, in which we will cut off excess valves and glue the parts end-to-end.

First, cut out the desired part of the paper model. After that, we cut off the valves, in our method they will not be needed. It's not that we don't like valves, but in our opinion, it is much easier to glue wheels and rollers without them.

Next, the most important thing is to find an object, a cylinder of the same diameter as our part. In our case, a regular battery was ideal. As a similar item, you can use all kinds of caps for bottles or sprays, pens, markers, and so on.

We put our cylindrical part on the found object. This will give the cylinder the correct shape for gluing the base.

It remains a little - to glue the base to our cylinder. Since we cut off all the valves, we will have to glue end-to-end. After applying the glue, it is necessary to press the base of the cylinder without removing it from the object found. Everything, the detail is ready, you can do the next one.

Do you have an idea?

Send your materials to our address Email - This email address is being protected from spambots. You must have JavaScript enabled to view. . The best materials will definitely be published.

Many people know that a lot of types of crafts can be made from cardboard. In childhood, for sure, any person with a fantasy and a desire to do something with their own hands made something out of this available material. Few people know, however, there are people who have not given up this childhood hobby, and make truly amazing things out of cardboard.

Today we will tell you how to make a car out of cardboard.

Nice car

She will surely delight your little one.

So what we need:

• At least two pieces of cardboard boxes;
• colored paper;
• Scissors;
• Compass;
• Colored pencil or felt-tip pen;
• Copper wire;
• Pliers;
• Glue.

Cut off its walls from the boxes and draw circles on them, these will be the wheels for our future car. Then cut them out with scissors.

After attaching the circles to the base of the second box, trace with a pencil the places where the wheels will be located.

With an awl or scissors on the sides, make holes where the center of the wheels will be located.

Cut off pieces of the prepared wire as long as the width of the future machine. This will be the basis for the wheel axles.

Attach the wheels with glue to the pieces of wire threaded into the holes. If you want the wheels of the car to spin eventually, use pliers to clamp the ends of the wire on both sides in the form of eyelets.

Then we will make the car beautiful appearance. To do this, use a pencil to draw and paint windows and doors, then cut them out with scissors. Or they can be cut out of paper - self-adhesive suitable color. If you have the time and patience, you can make the doors open.

In the same way, you can create a cardboard trailer for her, it will be more fun. You can attach it again with a piece of wire.

By the way, if inspiration attacks you, you can make a few more trailers, then you get a whole road train.

You will need the following materials for this craft:

• Sheet of cardboard.
• Paint, brush for coloring.
• Glue or stapler.
• Scissors.
• Unnecessary and obsolete old toys to decorate the car.
• Seven round cardboard tubes that remain after toilet paper.

Color paper cardboard tubes in different colors in any way - with a brush or using a piece of cotton wool. Then cut out circles from cardboard, they will serve as cylinders for the car and paint them.

Glue these wheels to the sides of the car using glue or a stapler.

And now we will tell you how to make a car out of cardboard using modern computer technology.

racing car

You will need:

• Paper
• Printer
• Scissors

This type of craft is easy to execute, you just need to print it, carefully cut it out and glue it along the drawn contours. Such blanks can be found as much as you like on the Internet, an example of one of these is shown in the figure below.

How to make a car out of large cardboard?

Glue all parts of the box with tape.

On both sides, draw the doors symmetrically on both sides and cut them out with a sharp knife with a thin blade.

Draw and cut in the same way windshield.

Using adhesive tape, fix the bent parts of the ends with a bend inward, now using it, fix the windshield.

If he has extra pieces in the corners, cut them off with a knife or scissors.

Using the bottom of paper cups, make wheels for the future car. If they are not at hand, you can use just round pieces of cardboard desired color and size.

Now color your creation and admire it!

Simple and cute machine

Shape a piece of paper into a square. Who does not know, it is done like this: bend the sheet diagonally and cut off pieces that protrude beyond the edges. Cut off the excess with scissors.

Bend the square into two halves, then two more times along and across. This will show you the fold lines. Now you can expand the sheet.

Wrap its lower ends to the very top of the middle. Then, on both sides, bend the lower parts of the bent corners, you will get wheels out of them.

Everything that turned out in the end, fold in half along the line that is along the central fold. Bend the lower part up and bend the upper right corner.

Draw headlights and other details for the product, paint in any colors. We hope your child enjoys this simple craft.

Girls car

Few parents realize or understand that not only boys, but also girls can play with cars. Below we will tell you how to make a car in order to carry your favorite dolls in it. I think your daughter will love this craft.

So, what you will need to have on hand:

• One cardboard box from under shoes;
• Thick cardboard;
• Thin paper of different colors;
• Glue;
• Double-sided tape;
• Long wooden sticks in the shape of toothpicks;
• A small piece of clear plastic;
• Anything that looks like headlights.

First, draw a door template on paper that would fit the size of the toy. The usual length of the legs, for example, the Barbie doll, which girls love so much, is eighteen centimeters.

Cut off both sides of the workpiece and bend inward the tips of the resulting template. On these tips we will mount the seats.

Then make cuts with a sharp knife where the car seats will be.

Now cut out even circles from colored and thick cardboard, four of each. These will be the wheels.

Using a needle or an awl, make through holes in the center of these circles and then make more of them.

From thick cardboard, cut out the hood and trunk according to the size of the shoe box.

Glue each prepared part to the car in turn, then make holes for the wheels in the box.

Using colored paper, glue the car, then make the windshield using transparent plastic.

Video lessons

Every boy loves to play with cars, he will not soon collect metal structure, but teaching a child to make paper models is very easy. Parents will need a little time, paper, glue and scissors. You can create such cars using the origami technique or a 3D design, for each method there are necessary materials, instructions and recommendations.

How to make a car from waste material?

The older the boy becomes, the more he will be interested in complex models, including those made of paper. It remains for parents to suggest which creativity is more exciting, provide the necessary materials and good mood to complete the task. For boys, among all models, it is cars that enjoy great prestige, and buying different designs every day will cost parents a pretty penny. After a while, the child will lose all interest in these beautiful cars, so it’s more interesting and more useful to make a design on your own. It does not require large financial costs enough desire and time.

You can create cars not only with the help of ready-made schemes, but also using improvised means, for example, cardboard and matches, wooden sticks and colored paper. For example, take a few cardboard cylinders left after toilet paper, glue each one with colored paper. After the fake dries, it is necessary to cut a rectangular hole on the surface of the cylinder, leave a little space on one side so that you can bend it and thus make a seat for the driver.

The design can also be decorated inside with felt-tip pens or a marker, to create a steering wheel, you should cut a circle out of white paper and glue it opposite the seat. The car can be additionally decorated with colored paper applications, choosing different shades. If the car is a racing car, you can put a number, if an ambulance or a fire model, then you can also cut out the corresponding signs or draw them. To fasten the wheels, use small bolts or caps from a plastic bottle.

Volumetric 3D paper cars

To perform the work, it is necessary to prepare a printer, a paper sheet, scissors, cardboard material, as well as glue, colored pencils, paints or felt-tip pens.

The instruction is very simple, you can assemble a car out of paper without special skills or knowledge. First you need to print on paper a model of the machine you like, then stick the sheet on cardboard to make the design durable. The image is cut out along the contour, this is another advantage of this technique of creating a paper typewriter.

Important ! All lines are already marked on the sheet, so it will be easy for the child to fold the model, just bend along the contour and hide the remaining wings of the workpiece inside.

These white ends must be glued so that the structure does not fall apart, and if the cardboard is strong enough, then you can use not stationery PVA, but super glue. After that, the boy is left with the most interesting thing, to decorate the car at his discretion.

An easy way to make a paper car

Paper cars are just as fun to play with as metal or plastic ones, you can arrange real races, and you can also build a garage, decorating all the structures with felt-tip pens, and using a toothpick to make a flag.

To create a paper machine, you need a square piece of paper, it should be folded in half, after which the edges should be unfolded and reverse side bend them to the middle of the sheet. Then, wrap the edges again in the opposite direction and fold the sheet of paper in half. Apply the outline of the car to the material, to do this, wrap the upper corners, then tuck them inward, two corners will peek out from below. They are also folded inward, after which it is necessary to make the wheels of the car.

Bend the lower corners back, rounding them a little, so you get wheels, in front, to make headlights, the corners must be laid inward. Do the same from the back of the machine, all the details vehicle you can draw, for example, wheels, headlights, doors or a driver behind the wheel. 15 minutes of time and a beautiful paper car is ready.

Origami car

This is a unique art that involves the creation of unusual paper figures, including cars. To work, it is enough to stock up on colored paper and patience, it is very easy, so children not only can, but also need to be connected, together you can create a whole car park. Or you can make a car out of banknote and give as a gift to a friend.

To create, for example, a sports car, you need to take a rectangular sheet, as a rule, the aspect ratio should be equal to 1:7. The work begins with the fact that the upper right and left corners are bent, so all the necessary folds are created. The next stage is the bending of the upper part of the sheet, along with the folded corners on the left and right. Small triangles will remain sticking out, which should also be folded towards the middle of the sheet of paper.

Next, you need to bend sides leaf, fold the lower part, follow the same algorithm that was performed when folding the upper part of the paper. It remains only to fold the structure in half, fill in the triangles that look out and that's it, the machine is ready.

The uniqueness of paper crafts is that they require safe materials available to any family. Possession of such art is within the power little child. You can attract a boy to needlework by creating toys out of paper only by getting him interested in this activity. Suggest little man options on how to make and print a car, car, truck and KAMAZ from paper using a gluing template.

The uniqueness of paper crafts is that they require safe materials available to any family.

How to fold or assemble a paper police car using origami: a simple diagram and drawings

Crafts can be done both for the game and original gift a good adult friend. Since men are always boys at heart, an origami machine made from a banknote is suitable as a gift.

You will need:

• Rectangular sheets of colored paper;
• scissors, glue.

How to make a toy car:

1. Fold the sheet of paper of your choice horizontally. This is the central inflection of the future product.
2. Parallel bend lines bend the two halves of the sheet to the left and right side inside.
3. Bend the bends back inward. Then turn the ends of the sheet in the direction from the wrong side.
4. Bent bends internal corners form the body of an improvised paper machine.
5. Under the wheels, make folds inward with triangles. To achieve maximum resemblance to the wheel, bend the corner peaks inward.
6. For headlights, the right corners of the car are also internally bent. On the left side, we do the kinks in the same way, but smaller in size and outward.

For a more colorful car manufacturing, stick paper triangles of a different color on the headlights.

How to make a paper car in 3 minutes (video)

Gallery: paper machine (25 photos)

How to make a car that rides out of paper

From paper you can make a moving car for the race. To start the movement, put such a craft on smooth surface and blow on her. Under the action of the air flow, the figure begins to slide along the surface, imitating the movement of a real racing car.

Necessary:

• A sheet of white paper with a side ratio of 1:7 or A 4.

You can make a moving car out of paper

How to do:

1. Fold the paper sheet in half lengthwise.
2. Mark the fold lines by folding the top right and bottom left corners of the paper.
3. Form a bend in the upper part of the sheet with inner triangles in the center.
4. In the central direction, bend the existing triangles again.
5. By bending the sides inward towards the center line, we form the sides of the car.
6. Fold the bottom of the sheet with triangles over the top of the craft, then fold the figure in half. Tuck corners into pockets.
7. Now the model of the car can be decorated as you wish.

By helping and guiding the child's work, you can add up a whole racing fleet.

How to make a truck out of paper

The figure of a truck looks more impressive in a three-dimensional format.

You will need:

• Thick paper;
• Glue, scissors;
• Wooden skewers;
• Double-sided adhesive tape;
• Plastic bottle;
• Compass, pin.

The figure of a truck looks more impressive in a three-dimensional format

How to do:

1. Cut separately four squares for the cabin, three equal rectangles and two squares for the body.
2. Fold two boxes from the cut out figures, connect them with fasteners using adhesive tape inside. You can first cut out the side windows from the two squares of the cab, securing pieces of plastic from the inside with adhesive tape. We do the same with the front of the craft, simulating the windshield. Glue the cab and body parts together.
3. On black paper, use a compass to designate eight small circles of the same size with a central dot. For stability, glue future wheels in two circles. Make a small hole at the center point with a pin.
4. Attach the wheels through symmetrical opposite holes on the sides of the figure, putting them on skewers through the hole.
5. Paint the figure of the truck with paints as desired.

The stability of the model will ensure the strength of the wheels - the more circles are glued at the base of the wheel, the better the craft will be.

How to make a war machine out of paper

You will need:

• Sheet thick paper dark green;
• Skewers;
• Scissors, compasses;
• Pencil, ruler, glue;
• Black paints, brush;
• Paper tubes or plastic cocktail tubes.

the finished product can be further decorated

How to do:

1. Draw four squares for the cockpit. On another sheet, draw three rectangles and two squares for the body. Separately, take a sheet, fold it lengthwise into three parts, glue it with a triangle - this will be a mount for missiles.
2. Draw side windows on the cab details, windshield on the front square. Glue the squares on the wrong side with tape or strips of paper.
3. Connect the car body parts in the same way. Glue a paper triangle on top.
4. Combine the finished cabin and body into a single model of the car.
5. From black paper, make the same eight circles with a central dot. In the designation, make a hole for the skewers with a needle.
6. Make holes at the bottom of the cab and body with skewers, string wheels on them. So that the structure does not fall apart, soak the ends of the skewers in glue, dry.
7. Cut the cocktail tube into equal parts, about 3 cm each. Paint all the segments black. Let dry well.
8. Gently put homemade rockets on the body mount with glue.

To decorate a military vehicle made of paper, you can paint dark spots on the sides (or stripes on the hood) of the finished product with watercolors.

paper race car

The figure of this racing car designed for the little ones.

Necessary:

• Roll of toilet paper;
• Paints, brush;
• Cardboard, compasses, scissors;
• Toothpicks 2 pcs.

The figure of this racing car was designed for the little ones.

How to do:

1. Clean the paper roll from the remnants of toilet paper, paint it in the desired color with watercolors. Draw dry ballpoint pens racing signs.
2. With a compass, mark four equal circles for the wheels, cut out, paint with black paint.
3. At the base of the roll, pierce holes for the axis with a pin - toothpicks.
4. String the roll on toothpicks, fasten on both sides of each wheel.
5. Cut a semicircle in the upper part, bending the outer part like a windshield.
6. Inside, you can put a little man cut out of paper by attaching it with tape.

To make the wheels of the car spin, put a drop of glue on the ends of the toothpicks. Dried glue will prevent the removal of paper wheels when driving.

Paper car sweep diagram: how to make

The machine sweep diagram can be downloaded from the Internet. The presented models allow you to make any kind of equipment from paper from special to Soviet times.

To make a figure according to the scheme, you must:

• Selected scheme of the car model;
• Scissors, cardboard;
• Glue.

How to do:

1. For the stability of the future figure, stick the picture of the scheme on cardboard. Trim after drying.
2. Fold along the lines of the layout details. Glue them, carefully hiding the places of gluing.

How to make a paper car (video)

Assembling an origami machine or its schematic construction will seem a little complicated at first. However, a fascinating and informative activity will delight the future designer. Handmade develops the thinking of the baby, helping to improve the fine motor skills of the hands. And the made machine will become the most beloved of all toys.