Clean a very dirty floor. How to wash the floor after repair? Cleaning of various floor coverings after repair

How to wash the floor after repair?

How to wash the floors and the door after the repair of whitewash or putty? After repair, traces of plaster, whitewashing, painting, various construction debris and dust remain on the floor. All these contaminants leave persistent marks and stains on the surface that must be removed.

How to wash off whitewash stains? For high-quality cleaning of the floor surface, it is necessary to go through three main stages:

• Remove global pollution (basic trash). Carry out the first wash of the surface clean warm water. After the main debris is removed, stubborn stains and dirt will become more clearly visible.
• Clean surfaces from stains of glue, putty and paint. Use a plastic spatula and thinner to work. For each floor covering, choose the product individually.

Important! In order not to spoil the surface of the floor, treat the product only with the dirt itself, without touching the area around it.

• Eliminate residues of dirt and used products. Carry out the final cleaning of the floor with cool water.

Remedies from different mortars:

• If it is necessary to remove paint stains from a painted surface, use alcohol. Soak a cotton pad in the product and apply to the stain. After a few minutes, carefully scrape off the dirt with a plastic spatula.
• After painting, wash the floor with a solution of ammonia (1 tablespoon of alcohol per 1 liter of water). Wash off all impurities with the prepared solution.
• If you need to restore the shine wooden floor, then walk on the surface with a cloth dipped in linseed oil.

How to wash the floor from whitewash without streaks?

In practice, washing white stains is quite problematic. To effectively clean the surface, it is necessary to change the water frequently, rinse the rag (mop) thoroughly and use special folk remedies. We will describe below how to wash the lime from the floor after repair, using improvised means.

Salt and Vinegar

To wash off traces of whitewash and prevent the appearance of cloudy stains on the surface, proceed as follows:

1. Thoroughly wash the surface of the walls and floor with warm water with the addition of dishwashing detergent (no more than 1 tablespoon per basin of water).
2. Fill in a container for washing the floor clean water and add 5 tbsp. tablespoons of table salt. Wipe the surface with saline solution. Salty water handles dirt well.
3. Add 0.5 cups of 3% vinegar to the finished solution and repeat the manipulation to clean the floor.
4. Wipe the surface clean water, dry.

Important! If the area of ​​​​the room is large or the pollution is too serious, then change the salt solution to a new one several times.

Vegetable oil and vinegar

Vegetable oil as part of a floor cleaning solution will help remove dry whitewash without special efforts. Proceed as follows:

1. Dissolve in warm water vegetable oil(for 1 liter of water - 1 teaspoon of the product).
2. Wash the surface with the solution. If necessary, change the water several times.
3. Add vinegar to clean, cool water (100 ml of product per bucket of water).
4. Rinse the floor with the prepared solution.
5. Wipe the surface with clean water and leave to dry, providing good access fresh air into the room.

Important! Vinegar can be replaced with chlorine-containing agent "Whiteness".

Potassium permanganate

A solution of potassium permanganate will not only wash off whitish spots from the surface, but will also disinfect the floor.

Important! For a varnished surface, it is better not to use this product, as stains may remain.

For other floor surfaces, apply potassium permanganate as follows:

1. In a container (basin or bucket) with slightly warm water, gradually pour the crystals of the product until the water turns a bright crimson color.
2. Wipe the floor clean with clean water and dry it.

Important! It is better to use this tool on dark floors, in order to avoid staining the light floor.

Kerosene for stubborn stains

If you don’t know how to wash the plaster from the floor when it has already dried well, then use kerosene:

1. Add a few tablespoons of kerosene to a bucket of water (for 5 liters - 150 g of the product). In case of severe contamination, the volume of the active component can be increased.
2. Wash the surface thoroughly with the solution. Treat places with dried putty (whitewash) with a sponge dipped in kerosene.
3. Wipe the floors with clean water with a glass of vinegar added several times to destroy bad smell kerosene.
4. Open the windows in the room, allow the treated surface to dry.

All-purpose cleaners

Many homeowners prefer to use all-purpose cleaners to clean surfaces after repairs. In the shops household chemicals there are plenty of drugs that can cope with any pollution.

Effectively removes dried whitewash Domestos Pine Fresh:

1. Dilute the agent in a container with water (2 tablespoons of Domestos per 5 liters of water).
2. Wipe the surface with the prepared solution.
3. Clean the surface several times with clean water.

Floor cleaners

If the pollution is insignificant, then they can be removed with the simplest detergents:

• "Mister Muscle".
• "Mister proper".
• "Gloss".
• Deterdek. This is an all-purpose liquid that removes all building stains.

Use your chosen remedy as follows:

1. Dilute the drug according to the instructions in water (1:5 or 1:10). The proportions of the components in the solution depend on the degree of contamination of the coating.
2. Foam the solution, apply it to the surface.
3. Rinse the floor thoroughly with clean water. If necessary, repeat the procedure.

An additional plus of using detergents is the atmosphere of freshness and a pleasant smell after cleaning.

Important! Use profile products designed specifically to remove whitish traces of whitewash after repair. The main thing is not to violate the recommended dosages and follow the sequence of actions described in the instructions.

How to wash the floor, depending on the coating material?

There are many materials used as floor coverings - wood, parquet, laminate, linoleum, ceramic tile. Each material has its own characteristics and needs special care. Consider some of the features of flooring materials and tell you how to wash the floor from whitewash, what means to use in each case.

Wood

Wooden floors need constant care, so you need to know not only how to clean them of whitewash, but also how to preserve the original beauty of an elite wooden flooring.

In order to effectively clean wood flooring, use the safe method:

1. Fill a container with warm water, add ammonia or vinegar at the rate of 1 tbsp. a spoonful of funds for 1 liter of water.
2. Wipe the surface with the solution 2 times.
3. After the wood is dry, coat it with a thin coat of linseed oil.

Important! If the paint has worn off in some areas, treat the problem areas with parquet mastic.

Parquet

If the parquet base is not varnished, then it is necessary to wash such floors no more than 1-2 times a year, since the capricious type of flooring does not like water very much. To wash such a floor from whitewash, use vegetable oil and vinegar:

• Remove the bulk of the dirt with a soft cloth and cool clean water. Wring out the cloth strongly and walk over the surface.

Important! Move from the far wall to the exit so as not to stomp on an already clean, washed place. Garbage from the floor surface can also be collected with a vacuum cleaner with a special parquet nozzle.

• Dissolve vegetable oil in cool water in a ratio of 100:1. Treat the parquet with the prepared solution, and it will be easy for you to wash the surface from whitewash.
• Wipe the floor with a mild vinegar solution.
• At the final stage of cleaning, wipe the parquet with a special Parquet wash & shine (100 ml of product in 10 liters of warm water). After such processing, the parquet will be covered protective film and will shine.

• If paint stains got on the parquet during the repair, then use a regular baby cream, cologne or alcohol to remove them. Apply the selected product to a cotton pad and place on the stain (for 1-2 minutes). The paint will get wet and can be easily removed from the parquet. After cleaning, wipe the remaining dirt with a damp cloth, rub the surface with wax.
• When cleaning parquet from complex contaminants, use only mild compounds: white spirit, methyl alcohol, kerosene.

Important! Do not use coarse tools such as brushes, scrapers, or abrasives and strong solvents.

Linoleum

Warm soapy water is best for cleaning linoleum. Take advantage the following tips coating care:

• To wash linoleum, you can use laundry soap, table salt and vinegar, vegetable oil, potassium permanganate solution. It is strictly forbidden to use such aggressive agents as gasoline, turpentine, ammonia to clean the material.
• You can not rub the contaminated places on the linoleum with soda, because after such treatment the material will quickly fade in the sun.
• To restore shine to the coating at the final stage of cleaning, rub the surface with a special mastic for linoleum. Drying oil and linseed oil are also suitable for this purpose. Treat the linoleum with a rag soaked in drying oil, and then rub the surface with an old woolen sock.

Important! Linoleum can be cleaned with a washing vacuum cleaner, since the material is not afraid of moisture.

Laminate

Strong flooring heat-resistant, load-bearing, shock-resistant. Such advantages are provided by a special top layer impregnated special composition. Despite all the advantages, the laminate requires competent care and respect.

When cleaning after repair, it is very important not to damage the top protective layer. Laminate is not very afraid of moisture, but you should not overdo it. To clean the laminate, you can use folk recipes using vinegar solution (1 tablespoon per 1 liter of water), sunflower oil and vinegar, saline solution. We talked about these cleaning methods above. At the final stage of cleaning the laminate, use the special Laminate wash & shine. The use of this product will not only wash off various contaminants, but also give the laminate a shine, and fill the room with a delicate aroma.

• To protect the surface from dirt and dust during repairs, free up as much as possible working space from furniture and other things, wrap all things in stretch film, and cover the floor plastic wrap, fixing it on the skirting boards with masking tape. Instead of a film, you can use newspapers by laying them in 2 layers.
• During glass repair, pre-treat with a concentrated soapy solution so that after completion construction works they were easy to wash.

footage

Take care of your floor and protect it before and during repairs so that cleaning doesn't take too long. We hope that our tips and tricks have helped you to keep the original beautiful look of the flooring after the repair work.

Repair is not only a joyful event of updating your home, but also a laborious process of cleaning up its consequences: whitewashing, painting, wallpapering, etc., all this leaves its hard-to-wash mark on the floor. A natural question arises: how to wash the floor after repair?

How can you make cleaning up easier after a renovation?

How to wash the floor from whitewash? There is a very practical judgment that it is better to prevent a problem than to correct the consequences. To reduce the risk of contamination of the coating, before starting work, do the following:

1. Cover the floor with oilcloth or polyethylene.
2. Attach it to the baseboards with masking tape.

Note: if such material is not available, use old newspapers or waste rags.

These measures will help reduce the degree of contamination, but, unfortunately, paint dust will still settle on the surface over time, and the glue will leave sticky spots. If you did not take care of timely protection at all, then long-term cleaning is provided to you.

But even then, don't despair! In this article, we will give you some actionable advice and recommendations on how to quickly clean the floor from any material after repair, while not spending a lot of time and effort cleaning your home.

How to wash the floor after repair?

How to wash or clean concrete dust? To cope with such a difficult task as quickly as possible, you will need the following tools:

• water container;
• a few rags;
• microfiber cloths;
• vinegar;
• salt;
• potassium permanganate;
• ammonia;
• kerosene;
• detergent for dishes;
• Domestos;
• liquid organic cleaner L.O.C. from Amway;
• special floor cleaners Mister Muskul and Mister Proper;
• care products for laminate and parquet, for example, Laminate wash & shine;
• tile care products, for example, HG "Polish, wax and dirt remover";
• Acidic floor cleaner DETERDEK.

How to wash an apartment after repair and white plaque on the floor?

The general scheme of your cleaning actions will look like this:

1. Clear the area for cleaning: remove furniture, things.
2. Use a damp broom to collect large debris in garbage bags.
3. Sweep the floor from dust or vacuum.
4. With a cloth dampened with warm water, wash off the main dirt.
5. Let the base dry.
6. If pieces of cement, putty, whitewash remain on the floor, take a spatula and gently try to scrape off upper layer such spots.
7. Wet the remaining traces well with water to acidify, then carefully collect them with a rag.
8. Start washing the floor from the far corner towards the exit with raking movements.
9. Rinse the mop thoroughly and often.
10. Unscrew the rag well so as not to apply excess moisture to the decorative coating.
11. Change the water in the bucket as often as possible.

Note: Having put the walls in order, consider their further design. We will advise you a lot.

How to wash the floor from construction dust?

There are several ways to clean the floor from whitewash, all of them have been tried and tested by more than one specialist. Choose the one that suits you best according to your type. decorative coating On the floor.

Method 1

To wash off traces of whitewash from the floor, use vegetable oil:

1. Make an oily solution in a ratio of 1:100 in a bucket of warm water.
2. Wash the floor thoroughly.
3. Replace the water, add 100 grams of vinegar to it.
4. Rinse with this solution.
5. Rinse off the solution with clean water.

Note: Vinegar can be replaced with any chlorine-containing product.

Method 2

To launder lime whitewash Use regular kitchen salt:

1. Wash the floor for the first time with a warm solution of water and dish detergent: 1 tbsp. funds for a bucket of water.
2. The second time with a salt solution: add ½ cup of salt to a bucket of water.
3. If traces of whitewash still remain, add 100 ml of a table bite to the saline solution.
4. At the end of the process, wipe with clean water.

Method 3

If the pollution is very serious, use potassium permanganate:

1. Dilute potassium permanganate in water until bright pink.
2. Wipe the floor with the solution.

Note: Do not use this method on varnished surfaces - streaks will remain.

Method 4

Dirt that has entered after repair is easily washed off with kerosene:

1. Add 100g of kerosene to a bucket of water.
2. Wash the floor.
3. To remove the smell, dilute 200 ml of vinegar in a bucket of clean water.
4. Wipe the floor with the solution.

Method 5

To clean old whitewash from the floor, use Domestos Pine Fresh all-purpose cleaner:

1. Dilute the product in water in a proportion of 50 ml per 5 liters of water.
2. Wash the floor with the solution.
3. Wipe the surface several times with clean water.

Method 6

To deal with dirt after repairs, use special floor cleaners: Mr. Proper and Mr. Muscle. They will make your floor clean and fill the room with fresh scents. They can be diluted in water and not removed from the decorative coating additionally after the main wash with clean running water.

Note: Please read the instructions carefully before use to ensure proper proportions.

Method 7

This tool is suitable for all floor coverings - a universal concentrate from Amway L.O.C:

1. Pour water into the container.
2. Add a concentrated product to it in a ratio of 1:200.
3. Wash the floor with the solution.
4. No need to rinse.
5. Repeat the process if necessary.

Method 8

Use special agent, designed for cleaning PROBEL gypsum dust, is also recommended for cleaning whitewash work. It is sold in all hardware and construction stores.

Apply it like this:

1. Dilute in a proportion of 10 ml of the product to 1 liter of water.
2. Apply to cover.
3. Wash off with water.

How to wash the floor after painting?

If you have a painted wood floor, use a solution of water and ammonia:

1. For 1 liter of water, add 1 tbsp. ammonia.
2. Wash the floor with this solution.
3. If you want to wooden surface shiny, additionally wipe with a cloth dipped in linseed oil.

Use rubbing alcohol to remove paint stains from a painted floor:

1. Soak a cotton swab in alcohol.
2. Apply for a few seconds to the stain.
3. Take a spatula and carefully peel off the paint.

Note: If the paint stains are extensive, dilute ammonia in water, rub the contaminated areas.

For high-quality cleaning of the floor from whitewash, use the DETERDEK acidic floor cleaner. It removes building dirt, limestone traces from all coatings.

The principle of its application is as follows:

1. Dilute, depending on the degree of contamination, in a ratio of 1:5 to 1:10.
2. Spread the substance with a cloth over the floor.
3. Leave for a few minutes
4. Wash off with plenty of water.

Note: To restore shine and shine to the old coating, wash it with a mixture of milk and water in a 1: 1 ratio.

How to wash linoleum after repair?

For a floor covered with linoleum, all of the above methods are suitable. Let's add a few more useful tips for the care of this decorative material.

Note: When cleaning linoleum, do not use such products as: ammonia, gasoline and alcohol.

Method 1

Dirty embossed linoleum is much more difficult to clean than other types of linoleum. It is ideally washed with a massive washing vacuum cleaner. With this approach, you can easily clean the coating from whitish spots.

Method 2

To return the linoleum to its original form, if it has darkened, use drying oil:

1. Apply the product to a rag.
2. Wipe the cover thoroughly.
3. Rub with a dry woolen cloth.

How to wash the floor from the laminate after repair?

Laminate flooring is a very common type of flooring these days. The laminated board is covered with a thin layer of fibrous material impregnated with thermosetting resins. This makes it heat-resistant, shock-resistant, resistant to long-term loads, but, despite all these qualities, it requires a careful attitude and certain care.

Option 1

The easiest way is to use a solution of water with vinegar:

1. Dilute vinegar in a bucket in the ratio of 1 tbsp to 5 liters of water.
2. Wipe the surface with this solution.
3. Wash off with clean water.

Option 2

Use special laminate care products - they wash and give shine to the coating, and also have a fresh smell:

1. Mix 100 ml of Laminate wash & shine with 10 liters of warm water.
2. Wash the surface with this solution using a microfiber cloth, it absorbs moisture well and cleans perfectly.
3. Make sure that the cloth is not too wet to avoid warping the coating.

Note: do not rinse the solution.

How to wash parquet after repair?

The parquet board is afraid of moisture, so it is not recommended to wash the parquet, usually it is wiped with a barely damp cloth. But if there is such a need, use special parquet care products for cleaning. For example, Parquet wash & shine. This agent is used for varnished parquet.

When cleaning, follow this sequence of actions:

1. Vacuum the surface with a special nozzle that has soft wheels.
2. Make a solution of 100 ml of the product in 10 liters of warm water.
3. Soak a regular floor cloth in the solution or use the special HG "Natural fiber floor cloth".
4. Before cleaning the floor, wring out the cloth and make sure it is not too damp.
5. Wash the floor.
6. After treatment, do not rinse or dry the surface - the product covers the floor with a special film and gives the surface a shine.

In order to remove paint stains from unvarnished parquet, we offer several options:

1. Option 1:
   1. Use regular cream.
   2. Apply the cream to a rag.
   3. Rub the stain gently.
2. Option 2:
   1. Get a cologne.
   2. Pour a small amount on the stain.
   3. Rub the stain with a cotton swab.
   4. Wipe with a damp cloth.
   5. Dry the surface.

How to wash floor tiles after repair?

To remove lime deposits from tiles, use a special care product. tiled flooring HG polish, wax and dirt remover.

Note: It protects the floor from the appearance of new stains, greatly simplifies the cleaning process.

The way to use it is very simple:

1. For 10 liters of water, dilute 100 g of the product.
2. Wash the floor by constantly rinsing the cloth.
3. Change the water as it gets dirty.
4. Do not rinse the floor to avoid removing the gloss layer.

footage

To wash off oil or enamel paint from tiles, use Mole Pipe Cleaner, it will effectively wash the coating and make it clean and shiny.

Note: After you finish the whole cleaning process, it's time to think about stopping the apartment so that it is comfortable, beautiful, practical. Read about:

1. To achieve a good result in cleaning the floor from whitewash, try to change the water more often.
2. Do not let the paint dry on the surface, try to clean it immediately.
3. When using strong-smelling products, work in a well-ventilated area.
4. Work in special clothing and protective gloves.

By adhering to the above cleaning rules after the renovation, you will be able to enjoy the work you have done to change the interior design and relax in peace. cozy home and not spend a lot of time on lengthy cleaning of all traces!

After renovation, the premises require thorough cleaning. However, sometimes to remove the remnants building materials happens not so easy. Especially when it comes to floor coverings, which suffer from pollution in the first place. Today I will tell you how to quickly and easily wash linoleum.

General rules for the care of linoleum

1. During the repair, do not forget to close the floor as much as possible. For this, oilcloth, newspapers, wallpaper and other materials that are at hand are suitable. You can fix the impromptu floor covering to the baseboards using adhesive tape.

1. Avoid using sharp objects(knife, spatula) to remove dirt. This can damage the linoleum.
2. Before using aggressive cleaning agents(solvent, alcohol-containing agents) it is desirable to carry out the test on a small area of ​​linoleum.
3. Soda and alkaline products are categorically not suitable for washing linoleum. It is quite difficult to wash the alkali - it penetrates deep into the linoleum and can leave stains. However, it not only has a negative effect on appearance coating, but also destroys its structure, making linoleum brittle and brittle.

1. Remember to mop the floor with rubber gloves- some products can harm the skin of the hands.

Removal of various building materials

A piece of cloth dipped in linseed oil or drying oil will help restore the luster of linoleum. Just rub it on the washed and dry floor.

3 recipes for removing cement and whitewash from linoleum

After using cement and whitewashing in a room where linoleum is laid, whitish stains and plaque remain on the floor even after thorough cleaning. This is due to the fact that the product chosen for cleaning either did not cope with its task, or is not suitable for this type of coverage.

How to wash floors from whitewashand cement? To do this, it is better to use the following tools:

Image	Cleaning agent
	Recipe 1. Salt and soap A small amount of salt and soap diluted in warm water will help to easily clean the whitewash from the floor. Please note - the water should not be too hot, otherwise the linoleum may lose its brightness and luster.
	Recipe 2. Manganese A few grains of potassium permanganate, dissolved in warm water, will help remove an unpleasant white coating.
	Recipe 3. Kerosene For heavy soiling, use kerosene diluted in water. The product has an unpleasant odor, so after using it, you need to rinse the floor again.

2 recipes to get rid of paint stains on linoleum

To remove paint from linoleum, it is better to use the following tools:

Image	Cleaning agent
	Recipe 1. Sunflower oil Sunflower oil perfectly softens the paint. After that, it can be removed with a stiff brush.
	Recipe 2. Solvent Dried paint stains can be removed with a thinner or other high alcohol cleaner.

The main rule in removing paint is to do it immediately after contamination. An old paint stain is much harder to remove.

5 ways to remove primer and mounting foam from linoleum

How to remove primer from tiles and linoleum? To remove traces of primer and mounting foam, it is better to use the following tools:

Image	Cleaning agent
	Method 1. Construction spatula This tool is perfect for removing not yet hardened mounting foam. Just collect it with movements from the edge to the center, and then wipe the mark with a special cleaner.
	Method 2. Sharp cutter Suitable for removing hardened foam. Cut off the foam and treat the contaminated area with a special cleaner.
	Method 3. Rags Fresh primer from linoleum can be collected with a regular floor cloth. After this procedure, the floors must be washed.
	Method 4. Acetone A solution of acetone in water (a third of acetone, two thirds of water) will help remove the already dried traces of the primer. For this tool, it is better to use a coarse washcloth.
	Method 5. Nail polish remover If the area of ​​contamination is not too large, you can use the usual nail polish remover and a hard washcloth. How to clean the primer from the tiles? In the same way.

Linoleum cleaners

Special cleaning products for linoleum

For stubborn dirt, you can use special store cleaners for cleaning linoleum. The most popular and effective:

Image	Cleaning agent
	"TaffStuss"- multifunctional foam cleaner for dry cleaning of various coatings, including linoleum.
	"White Spirit"- strong solvent which will easily remove any pollution. When using it, care should be taken - use gloves and ventilate the room well.
	"646"- multicomponent solvent which easily copes with various paint and varnish materials. Main advantages: ease of use, efficiency, low price. Main cons: toxic, highly flammable.
	"Mister proper" - one cap of this product, dissolved in a bucket of water, will do an excellent job of removing whitewash and plaster stains.

Folk remedies

Finally, I’ll tell you about effective folk remedies that will help you clean linoleum from various contaminants with your own hands and preserve its beauty:

1. Water and milk in equal amounts able to refresh linoleum and give it shine. And if after that you rub the surface with a woolen cloth, it will not just shine, but sparkle!

1. elderberries will help clean the linoleum in the kitchen and easily remove even stubborn dirt and grease stains.
2. Potato starch easily remove iodine stains. To do this, the starch must be moistened with water, and the resulting slurry applied to the site of contamination. The procedure must be repeated until the stain completely disappears.

1. School eraser Helps remove rubber shoe marks.
2. Match- yes, yes, you heard right - an ordinary match will easily remove traces ballpoint pen. Just wet the match and rub the dirt. The paste will become wet and easy to wipe off with a cloth.

Here is behind such a long-awaited, but still bringing a lot of trouble and inconvenience, repairs. There was nothing left to do: remove construction waste and thoroughly wash the floor. And then the problem arises of how to wash the floor after repair, because whitewashing, painting, plastering, and just construction dust are not amenable to any detergent. In this review, you will find answers to all questions that arise in the process of cleaning floors, tips that will greatly facilitate the work and contribute to achieving an impeccable result.

How to wash the tiles on the floor after repair

Method 1

Whiten the seams between the tiles, and also refresh the tile itself with the following homemade bleach:

• Prepare 10 glasses of water in a sufficiently deep container, as the mixture may react and rise for a while;
• Add ½ cup baking soda and 1/3 cup lemon juice to it;
• Pour in ¼ cup of vinegar;
• Mix, put on gloves and wash the tiled floor with the solution.

Method 2

Ideally washes a tile after repair from dust, dirt, glue, and also polluted over time, means Aist Sanoks gel.

• Put on gloves, apply the gel on the sponge, and then on the tile;
• The action of the product is instant, so almost immediately it can be washed off with clean water and enjoy the result.

Method 3

Building dust can be easily removed from tiles. Water with lemon or vinegar, glass cleaner, and ordinary soapy water will perfectly clean and shine. But with adhesive solution, especially dried ones, are more difficult to handle. To begin with, it should be softened.

• Moisten glue stains on the tile with a mixture of water and vinegar, or water and ammonia (acetone is also used, after checking it on a small area to avoid the risk of damaging the tile);
• Softened adhesive can be scraped off with a hard sponge or scraper.

Method 4

The hardened primer is washed off with acetone or you can purchase a special remover that includes a solvent. The principle of operation is similar to the previous version.

• Apply thinner or acetone to primer spots;
• Once they have softened, remove them with a scraper with a glass cleaning blade.

Method 5

You can get rid of the acrylic primer from the tiles in this way:

• Wet a towel and lay it on the soiled surface;
• Keep it moist for several hours by sprinkling water;
• As soon as the soil swells, it can be gently cleaned with pemolux and washed off with clean water.

Method 6

Paint stains on tiles are perfectly removed by products such as Mole, Pufas Abbeizer or regular acetone. As an option - liquid glass. When it turns into a film, it is easy to peel off along with the paint.

Method 7

Cement residue on tiles can be removed with Atlas Szop, Milizid, also an effective mixture of vinegar, citric acid and Domestos.

Any contamination is much easier to remove immediately after hitting the tile, before it hardens.

Method 8

If you don't know how to clean grout from your tile floor, experiment with the following methods and tools, keeping in mind that smooth glazed tiles clean well with a dry cloth, followed by water and detergent. Matte glazed - acid-containing substance.

• Washes the grout with a mixture of oxalic acid and water;
• Table vinegar, can be diluted with water;
• Acid-containing substances will help, for example, "Deterdek", "Litoclean";
• Cleaner "Cinderella";
• It is worth trying gasoline, acetone, white spirit.

How to wash whitewash from the floor after repair

Before whitewashing, the floor must be covered with plastic wrap. But, if the floor is already dirty, there is no reason to be sad, since there are many ways to clean the floor after repair, in particular whitewashing, given the degree of contamination.

Method 1

The most popular, lightweight and affordable option.

• Collect water in a suitable container and add vegetable oil to it, (100 g of oil per 10 liters of water);
• Wash the floor with this mixture, pour out the water;
• Refill the container with clean water and pour 1 tbsp. vinegar;
• Rinse the floor with this composition;
• Finally, thoroughly wash the floor with clean water.

Method 2

Even easier - use any dishwashing detergent to remove whitewash.

• Dilute the dish detergent in water and wash the floor;
• If necessary, repeat the procedure a few more times.

Method 3

The method is effective, but it will not be limited to a single wash, it will take 3-4, or even more times.

• Dilute vinegar in water (200 ml of vinegar per 10 liters of water);
• Wash the floor thoroughly;
• Change the water and cloth and wash again to the desired result.

Method 4

• Wash the floor with clean water;
• Type clean water again and dissolve table salt in it (5 tablespoons of salt per 10 liters of water);
• Wipe the floor with saline;
• Change the water, add vinegar to it (200 ml of vinegar per 10 liters of water), wash the floor;
• The tool will save the floor from whitewashing.

How to wash the plaster from the floor after repair

Generally, the most commonly used gypsum plaster, then cement. Gypsum plaster hardens quickly, so it should be washed off the floor as soon as possible. In fact, gypsum is chalk, so all of the above methods of washing whitewash from the floor will help. Also effective and chemicals, for example, "Atlas Szop", "Plitonite wash". In addition, try to remove gypsum plaster in the following way:

• Remove large pieces of plaster with a wooden or plastic spatula;
• Treat the floor with a dry cloth;
• Dampen the cloth and place it over the plaster stains;
• When the plaster is soaked, it can be washed with vinegar or oil, as is the case with whitewashed floors.

Cement plaster is removed in the following ways:

• Pour acetic acid over cement stains;
• 5-10 minutes after it dissolves, wipe off the residue with a dry cloth.

Concrete cleaners and solvents will also help: Lepta Himfrez, Lugato Zementschleierentferner, Bio Decap "Beton Guard".

Important: Always read the instructions for use of chemicals carefully. Their safety does not apply to all types of floor coverings.

How to wash linoleum after repair

The vast majority of the tips presented on how to clean the floor after repair, depending on what exactly it was contaminated with, are effective in this matter as well. But, in the case of linoleum, it is important to consider the following points:

• Do not use soda, alkali and other abrasive substances, so as not to scratch the coating, do not make it brittle;
• Do not wash linoleum with too hot water;
• Exclude the use of alcohol, including ammonia, when cleaning linoleum;
• Carefully apply, and it is better only on the stain, gasoline, turpentine, kerosene;
• Always test, even the most vaunted tool on a small and inconspicuous area of ​​linoleum. Otherwise, there is a risk that the pattern will wash off, and the coating will become rough.

How to wash the floor from the laminate after repair

Laminate flooring is one of the most popular today. This is a beautiful, stable and expensive coating, so it's hard to resist remarking that before repair work it is very important to take good care of it, protect it from pollution. But, if an oversight has already occurred, the following tips will help fix the problem.

Method 1

If the laminate is stained with paint, alcohol, white spirit or acetone will help to remove it pointwise:

• Remove large debris, vacuum small;
• Apply the product to a cotton swab and treat the stain;
• Wipe the treated area with a damp cloth.

Important: wash the laminate floor with a minimum amount of water. After washing, wipe dry to avoid swelling and deformation of the joints.

Method 2

Dirt, dust washes well with dishwashing detergent added to water. You need to use only soap foam or wring out a rag as thoroughly as possible. If there are stains, you can wash the floor with water, with vinegar added to it (for 10 liters of water - 1 glass of vinegar).

Method 3

Splashes of whitewash on a laminate floor will be removed by window cleaner, after which the floor is wiped with a soft cloth. Also effective in this case is vegetable oil, salted water and a solution of vinegar.

Method 4

soiled in mounting foam wash the laminate medicine- Dimexide. Use the drug in a ventilated area due to its strong odor.

• Soak a cotton swab in the product and place exclusively on the stain;
• Leave on for 10 minutes and wash off.

Method 5

Restoring a beautiful appearance and removing stains will help and purchased funds specially designed for the care of laminate flooring. These are Pronto for washing wooden floors, Mellerud BIO, Emsal Laminate, Mr.Proper.

How to wash a varnished floor after repair

How to wash the floor after repair, if the coating is varnished? Try the following processing options.

1. Oil paints on the floor are plagued with white spirit. The main thing is the point application of the product, directly on the stain. After treatment, the floor is thoroughly washed and wiped with a damp cloth soaked in a solution of 10 parts of water and 1 part of glycerin;
2. To remove whitewash or plaster will help a mixture of 5 liters of water, ½ cup of salt. The composition washes the floor well, leaving no marks and streaks;
3. Also, the varnished floor is washed with a mixture of 5 liters of water, 0.5 tsp. potassium permanganate and 1 tbsp. vegetable oil.
4. Special cleaners for varnish coatings are used: Bona Wood Floor Cleaner, IRSA Aqua Star R9.

How to wash floors after repair without streaks

• Laundry soap will help eliminate stains on the floor from linoleum. A small amount is added to water, which should be changed very often, and the rag should be constantly rinsed and squeezed thoroughly;
• Laminate floors are washed with warm water and vinegar. Acid evaporates moisture, so that no stains remain on the washed floor;
• Marble floors are not washed with soap or powder, it is best to use only warm water, adding a neutral pH agent to it, for example, InterChem 501.
• When washing a floor from a tile, ammonia is added to the water, citric acid, vinegar essence, window cleaner.
• Eliminates stains on the floor with a mixture of water, with the addition of a small amount of kerosene, salt.

There is a lot of housework, one of the rather difficult stages is washing the floors. But no matter how hard you try, there are often dirt on the floor that is not so easy to remove with a wet rag, stronger means are needed here.

So, all sexes are different, however, as are the methods of cleaning stains from the floor. We'll figure out.

Dirt on wood floor

To effectively clean a wooden floor, prepare everything you need, namely:

• soda;
• vinegar;
• sandpaper;
• stain;
• cotton swabs.

The procedure for cleaning a wooden floor from contamination consists of the following steps.

1. Remove stains with sandpaper, take out the trash.
2. Prepare a mixture for cleaning (it includes 1 liter of water and 3 tablespoons of soda).
3. Wipe the place of contamination with the prepared mixture, wait 1-2 hours and wipe again, and so on until the stains disappear.
4. Wait until completely dry.
5. Wipe the now uncontaminated area with a cotton swab dipped in vinegar.
6. Choose the right stain or paint.
7. Put it on the floor.

The considered mixture is good, but still not perfect. Sometimes you have to use a special chemical composition, which is freely available at a hardware store.

Before treating the floor with such a solution, the following manipulations must be performed:

• open windows;
• cover furniture;
• wear goggles, gloves and a respirator.

When all the necessary preparations are made, lubricate the contaminated area with a chemical composition using a brush. If parts of the coating are swollen, simply scrape them off. Just do it gently and carefully.

The last step that completes the floor cleaning procedure will be washing the area to be treated.

If necessary, the process can be repeated, only to use oxalic acid.

Secrets of parquet beauty

Before deciding what means to clean the stains on the parquet, you need to know how to properly care for it.

Caring for parquet flooring is simple and involves a few steps.

• Sweep the floor with a soft brush every day.
• Vacuum at least once a week.
• In case of excessive moisture, wipe immediately with a towel or damp cloth.

If the floor has been varnished relatively recently, within two weeks after this procedure, you can only clean the parquet with a vacuum cleaner, and forget about wet mops for a while.

But pollution, which is not so easy to deal with, is still unavoidable. Insidious spots appear and do not give rest. The process of dealing with them is difficult, and if it does not bring the desired result, it is also not very pleasant.

But, knowing the main secrets, it will not be difficult to remove even the most “harmful” stains.

Grease stains can be easily removed with:

• warm water with dishwashing detergent added to it;
• denatured alcohol.

But paint stains can only be removed with a water-alcohol solution in a ratio of 1: 3.

Wax on hardwood flooring is not uncommon and requires an ice pack to remove it. After freezing, it will easily move away, all that remains is to scrape it off with a non-sharp object to avoid damage. Such a procedure is impossible better fit and to remove chewing gum, and in the case of stains from tar or tar. And the chemical solution will deal with all the remaining traces.

Many parents are faced with pencil drawings on the floor. Creative children are, of course, nice, but painting on the floor does not cause such positive emotions. You should not worry and worry: "White spirit" will save the parquet from children's pranks. If it is not at hand, you can try to erase the art with toothpaste.

There is an opinion that blood leaves stubborn stains. Nothing like this. If the traces are fresh, they can be easily wiped off with plain water, but to remove old ones, ammonia must be added to the water.

Accidentally spilled nail polish is no reason to panic. The stain must be moistened with acetone, and then cleaned well with the rough side of the sponge moistened with alcohol.

Fruit stains are removed using two products that are in every home - this is water and detergent. The second component, if necessary, can be replaced with oxalic acid.

If rubber sole marks are a problem for your parquet floor, an ordinary eraser will come to the rescue.

It is easy to deal with stains on the floor, the main thing is to know what and in what situation it is necessary to apply. And then the procedure for cleaning the floor from dirt will be effective.