Look inside your favorite pot for boiling water for tea and you will see white streaks, deposits on the walls. Any electric kettle will accumulate a layer of lime over time if it is not regularly cleaned. This plaque contains hard deposits of minerals when hard water is used, which does not pass through the filter. "Crust" on the walls impairs the operation of heating devices, is harmful to health. After reading the material, you will learn how to remove salt from the inside of electric and other tea utensils using traditional folk remedies.

How to remove scale in a kettle

To clean it from mineral plaque, especially if this dish is used daily, it is imperative to systematically. The formation of deposits depends on the quality of the water used: if it is hard, then a layer of mineral plaque and lime will form on the walls much faster. How to wash the kettle from scale? There are various tried and tested home tricks to help remove these mineral deposits. Soda, vinegar, coca-cola, citric acid, products from the department household chemicals are working to fix this problem.

How to clean a kettle with citric acid

How to descale a kettle using citric acid? It cleans metal brewing, plastic, glass products. In order to clean, you will need to boil half a liter of water, adding 2 large tablespoons of citric acid there after boiling. Wait a couple of hours for the water to cool. Removal of the "crust" on the walls, cleaning will occur on their own. It rarely takes a little help with this solution to successfully fight plaque. After that, boil again inside clean water, drain it. Your tea will become tastier and your health will not suffer.

Descaler

How to clean the kettle from scale using specialized cleaning products from the household chemicals departments of stores and supermarkets? With their help, you can wash a product made of stainless steel or any other material. To find out if a cleanser is right for you, read the label carefully before buying. After purchasing the product, you only need to strictly follow the attached instructions. As a rule, you need to boil water, add powder, cool this solution, drain it and wash it well. clean water, boiled a couple of times.

Vinegar

Try an effective, inexpensive way to descale your kettle with vinegar. It is aggressive, so the method is suitable for removing heavy mineral deposits. It is used for tea utensils made of glass, plastic, metal. To carry out the removal of plaque, you will need to pour half a liter of water, boil, add a glass of 9% vinegar, leave for an hour so that the process goes arbitrarily. Sometimes you need to walk along the walls with a sponge. An important condition is to thoroughly rinse the heating device from vinegar after the procedure, then boil it a couple of times with clean water.

Soda

clean enamel teapot, aluminum cookware soda will help - a folk remedy for scale, which is easy to find in retail and it costs a penny. This will require 500 ml of water and a tablespoon of soda ash. If the mixture does not cover all the limescale, then increase the amount of water with soda. Bring the resulting solution to a boil and cook it over low heat for half an hour. To enhance the effect, leave the water with soda to cool there for a couple of hours. If necessary, rub the excess with a sponge, rinse the dishes well and boil clean filtered water there.

How to descale a Coca-Cola kettle

Try in practice another extraordinary way to fight against mineral plaque, which will require a strong carbonated drink containing citric acid. This option is only suitable for electric heaters. How to clean the kettle from scale, just adding Coca-Cola? First of all, you need to release gases from the drink, leaving it alone with the lid ajar for an hour, pour it into a bowl and boil. Leave to cool for a while, if necessary, rub with a sponge or hard washcloth. Drain the liquid, rinse with clean water.

Video on how to get rid of scale in an electric kettle

The energetic and very nice presenter of the video will popularly talk about the simplest but most effective measures for cleaning electric cookware in order to forget about plaque for a long time. How to remove scale in an electric kettle? If you have such a heating device for making tea, then this video will help. After watching the video, you will understand which tool is suitable for your case. Spend just a couple of minutes of your personal time, but you will understand which is better - soda, vinegar or lemon?

An electric kettle is a handy device that is often found on modern kitchens. It is made from different materials A: plastics, ceramics, glass and stainless steel. However, no matter how high-quality and high-tech it is, you will have to think about how to remove scale in an electric kettle.

The question is really difficult. You need to clean the electric kettle at home very carefully, carefully choosing cleaning products: incorrectly selected, it can ruin the heating element, and you will have to take your favorite appliances to the trash.

Scale is insoluble salts (silicates, carbonates and sulfates of calcium and magnesium) that have pores. They harbor dangerous bacteria. Drinking water that has been heated in a dish with a thick layer of scale is very unhealthy. In addition, heat does not pass through it well, so the water will take longer to heat up, increasing energy consumption and overloading the heating element of the kettle. This leads to a quick breakdown of the device. That is why it is important to get rid of salt deposits.

Cleaning methods

There are two ways to descale an electric kettle:

• mechanical. You will need hard sponges and brushes that scrape off plaque. This method requires a lot of effort and time. Experts do not recommend using it, because cleaning tools leave scratches on the walls of the kettle, which creates favorable conditions for the reproduction of pathogens in them. It is difficult to remove all scale, especially from small elements. However, if there is nothing else at hand, then use the mechanical method;
• chemical. Acid and alkali are needed: part of the salts lends itself to one substance, part to another. They are in almost every home - acetic, citric acid and soda. The mechanism of action is simple: these products decompose scale into constituent components that are easily washed off with water.

Chemicals: acids and soda will help to clean the kettle at home qualitatively and easily.

Now there are a lot of tips on how to remove scale. The main thing to remember is:

1. Carefully choose a plaque remover: some of them are not suitable for a particular teapot material.
2. Consider the degree of contamination. If the scale layer is thin, then boiling is not worth it. Pour the required solution into the kettle and leave for several hours. With a significant amount of deposits, you will have to boil, and the procedure will most likely need to be repeated.
3. Warn loved ones about cleaning the electrical appliance so that no one accidentally gets poisoned.
4. Before use chemical methods Scrub the sides of the teapot with a hard, non-metallic sponge for a few minutes. Skip this tip if you have a plastic appliance (its walls are easy to scratch).
5. Do not fill the kettle completely, otherwise the water will pour out when boiling. Be guided by the marking of the displacement of the device. Usually there are allowed maximum and minimum values.
6. Wash the kettle after cleaning is complete. Then boil it once or twice plain water and pour it out, thereby removing the remnants of the chemical and the smell (otherwise there is a risk of poisoning).

Removing salt deposits is a simple matter. But if you want a well-maintained electric kettle for long-term use, don't let it build up a thick layer of limescale.

Vinegar

You can clean the electric kettle with acetic acid, but this must be done carefully. Use 6 or 9% table vinegar. This method is used for electrical appliances made of plastic, glass and stainless steel, if there is a large amount of hardened scale inside the kettle. Try one of the recipes:

• Fill the kettle two-thirds full with water. Top up the rest with vinegar. The solution must be boiled. Leave it for a few hours to let the water cool down.
• Fill the kettle with water and vinegar in an approximate ratio of 2:1 (that is, you will need a little less than two glasses of acetic acid per liter of water). Boil water first. Then add vinegar and turn on the kettle. After turning off, leave it for an hour.

Instead of vinegar, you can use vinegar essence 70%: one glass is replaced by 1-2 tablespoons, respectively.

Ventilate the room after using vinegar to remove the pungent odor.

Lemon acid

Citric acid is a milder and more suitable way for electric kettles to remove salt deposits. With its help, it is difficult to get rid of hard old scale, but it is perfect for small dirt. Another plus of this method is its versatility: it is suitable for plastic, metal, ceramic and glass devices.

Gently pour citric acid powder into boiling water (it can hiss and splash out). The ratio of ingredients: per liter - 1-2 teaspoons. The solution should be boiled for several minutes. Then leave it for a couple of hours.

Instead of citric acid powder, juice is sometimes added. Squeeze a quarter of a lemon into half a liter of water or simply put it in a kettle, waiting for the water to boil.

Soda

Scale in an electric kettle is removed with baking soda or soda ash. This is the most gentle method. It is suitable for any kettles. Use with caution on colored plastic utensils as stains may remain.

Pour baking soda into boiling water. You will need 2 tablespoons per liter. Let the solution boil for a few minutes, then leave for a couple of hours to cool completely.

Citric acid and soda

It is possible to effectively clean an electric kettle from plaque at home using the following procedure:

1. Pour baking soda into a kettle of water. Boil it, then leave it for half an hour. Then drain.
2. Pour water into the kettle and saturate the citric acid there. Then repeat the steps of the previous paragraph.

Special funds

You don’t have to think about which method to choose, how to use it and whether it will suit your kettle, because the modern household chemicals market is replete with special products. The seller of such a store will tell you what to choose.+

Follow the instructions for use of household chemicals to effectively, efficiently and safely descale the electric kettle.

In the vastness of the network there are many different recommendations, but not all of them are suitable for electric kettles. It is not recommended to use:

• cleaning (potato, apple and others);
• colored carbonated drinks. With caution, you can use colorless ones ("Sprite", "Schweppes"). The liquid should not contain gases, so leave the carbonated drink for several hours in an open container. Then pour it into the electric kettle and boil;
• a well-known method of triple exposure (soda, citric and acetic acid);
• brines.

Prevention

Even the hardest and oldest raid can be defeated, but it will take a lot of time and effort. It is better to remove a thin layer of scale: you will spend less effort and extend the life of your electrical equipment. For this:

• clean the electric kettle regularly, at least once a month;
• if hard water flows from your tap, you can use a filter;
• when choosing an electric kettle, give preference to those in which the heating coil is located inside the body, because it is quite difficult to clean it.

Lime scale inside your electric kettle can quickly disable the appliance and also harm your health. You can cope with it with acid or soda, which almost every housewife has. In addition, the household chemicals market offers a variety of special means.

Instruction

The easiest way is to buy any "anti-scale" in the store and clean it following the instructions. Such a tool, as a rule, costs. But, if you want to protect your health from accidental ingestion of chemicals, it is better to use natural remedies.

Boil the resulting solution and leave for at least two hours, and if possible, overnight.

After pouring out the solution, rinse the kettle thoroughly with running water and boil again to remove any remaining vinegar and scale.

In addition to acetic acid, citric acid can be used to combat scale - 1 tablespoon per 1.5-2 liters of water. Pour acid into the kettle, pour hot water and leave for 15-20 minutes. It is not necessary to boil the solution. If the raid was not very strong, then after the specified time the kettle will shine like new.

In the absence of citric acid and vinegar in the house, do not despair. It may be unexpected, but in the past, grandmothers got rid of with the help of an ordinary!

Take clean potato peels, cover the bottom of the kettle with them and add 1.5-2 liters of cold water.

Drain the cooled water and rinse the kettle well with tap water.

If you are still unhappy with the result, try another very extravagant remedy.

Use a special descaling pencil. Heat the iron to 100°C, apply the product evenly on the soleplate and leave it in this state for several minutes. Then delete scale cotton fabric. Pour into clean water and clean the holes with steam.

Delete scale with an iron table vinegar. Prepare a solution of 1 cup of water and 1 tablespoon of vinegar. Pour the liquid into the iron and turn on the steam function.

Clear washing machine from scale with a special tool, for example, Antinakipin. It can be bought at a hardware store. Before use, read the instructions or consult the seller.

Pour the product into the washing drum, set the mode at a temperature of 60-90 ° C. To prevent the formation of scale, carry out a similar procedure regularly - once a month. If your city or area has poor water quality, do preventive maintenance every.

Tip 4: How to descale the kettle with improvised means

Scale in the water appears due to the content in it of a large amount of salt and impurities that settle on the bottom, walls and heating element of the electric kettle. If not on time, then this may affect a quick breakdown, or the process of heating water will be longer. In this case, scale affects the body negatively, destroying the kidneys and the genitourinary system.

The easiest way to remove scale is with citric acid. To clean the scale, you need to buy one bag of food-grade citric acid. Pour the acid into the kettle. Pour cold water into it and leave for several hours. Then pour everything out of the kettle, pour fresh water and boil several times.

If citric acid did not cope with scale, then pour 100 g of 9% vinegar into the kettle with water, then boil this mixture, pour it out and rinse the kettle thoroughly.

Fanta, Sprite or Cola soda is suitable for descaling. It is necessary to remove gases from them, fill the kettle by 1/2 and boil.

Potato peels are also suitable along with apple peels. They should be washed, put in a kettle of water and boiled several times.

If the kettle has a high scale content, then you can do the following procedure: Pour a full kettle of water, add 1 tbsp of soda and boil for 30 minutes. Change the water, add 1 tablespoon of citric acid and also boil for 30 minutes. Change the water, add 150 g of vinegar, boil. With this method, the scale will become soft and must be removed with a sponge.

Related videos

Tip 5: How to descale a stainless steel kettle

Lime deposits in water not only make it hard - when boiling, substances settle inside the kettle, forming scale on the walls. Depending on the material of the kettle, scale will form on it less often or more often.

In stainless steel, scale forms somewhat more slowly. However, it cannot be completely avoided. Scale slows down the process of boiling water, and if it does, then it takes a lot of electricity. Deposits can harm not only the kettle, but also the person who drinks the water boiled in it. The filters installed on the spout are of little help in solving the problem.

Scale prevention

Most The best way to combat scale - to prevent its formation at all. The rules to follow for this are quite simple. For boiling it is necessary to use soft and clean water, passed through a filter or settled. It is necessary to boil a portion of water once. Water that has already boiled should not be heated - it is better to replace it with fresh water. Before each use, it is advisable to rinse the teapot well from the inside, rinse from the resulting white flakes, the walls of the teapot should be cleaned of plaque more often.

Means with which you can remove scale

In hardware stores, you can buy quite effective means to combat scale, such as Silita, Antinakipin. Their use is almost the same: basically, the funds must be poured into a kettle, pour water and boil. After about fifteen minutes, the kettle should be rinsed with clean water.

If a reddish scale forms during boiling, citric acid will help. But for enameled it is better not to use it. Prepare a solution of a liter of water and a teaspoon of acid, boil it. Leave for 10 minutes and boil again. If the raid still remains, after the second boiling it is not necessary to drain the water - it is left in for another couple of hours.

You can clean your stainless steel kettle with a mixture of vinegar and baking soda. Suitable for those who can easily tolerate the smell of vinegar. Mix soda with water until gruel and rub into the walls of the kettle. After that, dampen a cloth with strong vinegar, wipe over the slurry. Baking soda and vinegar react and can be done very easily.

Scale can be removed with soda water - Coca-Cola or Sprite. The liquid must be poured into the kettle, boiled and left for about 10 minutes. Then drain everything, and rinse the kettle. For teapot white color it is better to use a sprite - so that the dye does not spoil the whiteness.

Whatever tool is chosen - soda, sparkling water or specialized household chemicals - descaling should be done regularly. Then the cleansing is much easier, and the scale will form much less.

The tap water that is poured into the kettle contains a large number of different salts. They gradually settle on the inner surface and on the bottom of the kettle, resulting in scale formation. It must be removed regularly - there are a lot of funds for this, and you can choose any convenient method.

You will need

• - means of household chemicals for descaling;
• - vinegar;
• - baking soda;
• - lemon acid.

Instruction

Pour a special descaling agent into the kettle. It can be Antinakipin, Antinakip or other household chemicals with a similar effect. They are very easy to use - you just need to fill them with water and boil. This method can be called the easiest, but at the same time it is far from the most useful. Cleaning products contain many chemicals, which, even after repeated rinsing, may partially remain in. If they enter the stomach, they are dangerous to the body.

Try to descale more in a safe way- using the usual . Boil water, add three tablespoons of soda to boiling water. After that, the water should cool down. After about half an hour, boil the kettle again. Pour boiling water, and fill the kettle with hot water with the addition of a couple of tablespoons of vinegar essence. Boil water again and cool the kettle. After carrying out these activities, the scale becomes loose, it is very easy to remove it with a regular dishwashing sponge. This method is good for running ones. No matter how thick the scale layer is, it begins to move away in thin plates.

Take citric acid - two sachets are enough for a standard three-liter kettle. Pour the powder into cold water and boil. Leave the water in the kettle for about half an hour, then drain, pour fresh water and boil again. The acid will easily break down the scale. After that, the kettle will need to be thoroughly rinsed so that there is no aftertaste left. This method is perfect for descaling both in simple and in. But here for metal teapots citric acid is contraindicated. In the process of dissolving scale, acid makes rough inner surface kettle, and new scale will form in it much faster. With a thick crust of scale, citric acid will not cope.

At the moment, the electric kettle has become a decoration of the kitchen and indispensable assistant however, a problem such as scaling may occur as a result of repeated use. If left untreated, lime scale can cause an unpleasant taste in water and damage the appliance. In order to remove scale in the electric kettle, you can use the following tips.

Plaque forms on the heating element of the kettle and its walls, which is ordinary salt that has settled on the surface. Before cleaning, you need to figure out what is the cause of limescale. Sometimes it's about the quality of water: then it is necessary to replace it with a better one.

In order to remove scale, you will need the simplest products that most housewives have in the kitchen.

1. You will need 2 tablespoons of vinegar and 50 g of citric acid: pour vinegar into the kettle and then pour lemon, boil the kettle and leave it with this mixture for 60 minutes. After the specified time, the plaque can be easily washed off with a sponge. If the first time there is a plaque, then you can repeat the procedure. Sometimes lemon is used instead of citric acid.

2. Baking soda is an excellent tool for cleaning the kettle. First, pour water into the kettle, then pour 1 tablespoon of edible salt there, boil the water and leave for 30 minutes, then pour water into the kettle again, add 0.5 teaspoon of citric acid and put on fire again. After the water has cooled, you can start washing the kettle with a kitchen sponge.

3. Vinegar also helps to clean the kettle: pour a third of vinegar and two parts of water into the kettle, then boil the water and leave it to cool. Scale in the kettle under the influence of acid will dissolve, then it can be easily washed off.

4. One of the most unconventional cleansing methods is the use of regular sparkling water. Pour water into a kettle, bring to a boil, and then drain. After this manipulation, the limescale should move away.

5. Keep in mind that there are a large number of household chemicals in stores for cleaning limescale. Sometimes such funds are quite expensive, and the result is not so effective, so you can use the methods.

Consider the following points:

1. After carrying out the cleaning procedure, the electric kettle must be rinsed, otherwise the substances that you used for cleaning may enter the body along with drinks.

2. Most the best remedy in the fight against scale - this is the daily care of your electric kettle.

Related videos

Scale on the walls of the kettle is formed in any case, even if a system is installed in the apartment that will improve the quality of the water, but it is impossible to completely clean the liquid from the salts in the composition in this way. Sooner or later, limescale will settle on the walls, which, in addition to looking unsightly, can harm the health of loved ones. This means that it's time to think about how to descale the kettle. Today, in our review, we will analyze in detail the methods for self-cleaning the kettle from scale, and we will also study exactly how each tool works.

Plaque forms on the bottom and inner walls of the device, and in electric models - on the heating element. Unfortunately, it is impossible to avoid this phenomenon, plaque will settle to a greater or lesser extent, even if used. The formation of plaque occurs due to the content of salts in tap water, and the more there are, the more often the plaque will appear on the walls. This problem cannot be ignored for several reasons:

• for an electrical device, this increases and leads to an early breakdown;
• in ordinary teapots, plaque can destroy the walls;
• salts are harmful to the body, getting into or coffee, they thus penetrate inside and adversely affect the functioning of the kidneys and urinary system.

How to clean the kettle from scale at home using folk methods

We all remember the old adage that it is easier to prevent a problem than to fix its consequences. So it is with plaque - with regular cleaning, it is much faster and easier to remove it, and you do not need to use it for this. We have selected the best homemade recipes on how to get rid of scale in an electric and conventional kettle.

How to clean the kettle from scale with citric acid

Most effective remedy- lemon acid. It can be used for both regular and electrical models. Before you descale the kettle with citric acid, you need to understand the principle of action of the lemon. Lime scale is an alkali that reacts with an acid. The procedure is as follows:

1. Pour a bag of lemons inside and pour plain water above the level of plaque formation.
2. Bring to a boil and leave on low heat for a few minutes.
3. The reaction is almost instantaneous, the plaque falls off in pieces from the inner walls.

For prevention purposes, such a procedure as cleaning the kettle with citric acid should be performed monthly. Folk remedy can quickly remove scale and other household appliances, For example, .

How to get rid of scale in the kettle with vinegar

Vinegar can be found in several recipes for cleaning walls from plaque. For electrical appliances it is undesirable to use it, however, if the case is running, and there is no other way out, acid can also be used. Before descaling the kettle with vinegar, you need to choose one of the following recipes.

Recipe	Description
Recipe 1	Pour 2 tbsp. l. essences, 1 liter of water, heated to 70°C. Reduce heat and hold for another half an hour.
Recipe 2	Dilute 150 g of 9% vinegar with 1 liter of water, pour the composition inside. Boil for at least half an hour.
Recipe 3 (for electrical appliance)	Pour 2 cups of water, bring to a boil. Add 200 g table vinegar or 2 tbsp. l. essences. Leave the composition in the device for 20 minutes. If the plaque does not peel off, bring the liquid to a boil and wait another quarter of an hour.

In all recipes, the time is approximate, the hostess should observe the intensity of plaque peeling. After treating the inner walls with vinegar, wash everything thoroughly and boil fresh water 1-2 times to remove the smell. You can use vinegar.

How to descale a kettle with baking soda

Baking soda powder can be used on metal, enamel and electric models. The main advantage of using soda is that it removes old formations, but you need to be careful during processing, as it can leave scratches on the surface. Pour 2 tsp into the device with a volume of 3 l. with a slide of soda powder, pour water and boil for half an hour. After allowing the solution to cool and wash the walls in the usual way. If necessary, repeat the procedure several times.

How to clean the kettle from scale with carbonated drinks

Not everyone has a positive attitude towards soda, calling such drinks chemical. But since they are approved for use all over the world, they can certainly be used to clean the device at home. For example, Sprite effectively removes plaque, Fanta and Cola have a similar cleaning property, but they can stain the walls, so our editors excluded them. The procedure is as follows:

1. Pour Sprite inside, the amount of drink should not exceed half the volume of the kettle.
2. Bring to a boil, then rinse everything thoroughly.

It is important! It is strictly forbidden to clean electrical appliances with carbonated drinks. This method helps only for conventional devices.

How to descale a kettle with brine or oxalic acid

Cleaning with brine or oxalic acid is suitable for all kinds of household appliances. The main advantage of this method is the availability and cost savings. However, this method is not suitable for old and hardened plaque, in addition, cleaning with brine or oxalic acid will leave a smell inside for some time. You need to be ready for this. To remove plaque with the help of cleanings, you will need:

• 0.5 liters of brine;
• boil the brine for 10-15 minutes;
• after the solution is drained, and the walls are thoroughly washed. Baking soda can be used to remove the odor.

It is interesting! The composition of the marinade, as a rule, includes vinegar, so the result of cleaning with it has such an effect.

To clean plaque with oxalic acid, you should:

• pour a small amount of the composition inside, pour water;
• bring to a boil and leave for a few minutes. After that, rinse well.

How to clean scale in a kettle with apple or potato peels

In home advice, there is another extraordinary recipe - removing plaque with apple or potato peelings. It is used for metal or enameled surfaces, it is also suitable for electrical appliances. Of the main advantages, one can note the availability and cost-effectiveness, in addition, it is also one of the most environmentally friendly methods. Unfortunately, cleaning is a poor helper for stubborn plaque.

The principle of operation is explained simply. Apple peels contain fruit acids of organic origin, which react with an alkaline environment. limescale. Potato peels have an alkaline base, its action is similar to baking soda. The procedure is as follows:

1. Cleaning place inside, pour water and boil for 10-15 minutes.
2. Drain the water, rinse the walls in the usual way.

Combined kettle cleaning with vinegar, baking soda and citric acid

The combined method for cleaning the walls is heavy artillery for dealing with scale. However, this method, due to its aggressiveness, is not suitable for electrical appliances.

The algorithm of actions is as follows:

1. Stir in 1 liter of water 1-2 tsp. soda, boil.
2. Before you remove the scale in the kettle with citric acid, you need to pour out the previous composition, do all the steps again, but add 1 tbsp. l. lemons.
3. Perform all actions again, but include an additional 100 g of table vinegar in the composition.

Such an algorithm should lead to a positive result, the plaque remaining on the walls becomes loose in its structure and is easily removed with a sponge.

Article

An electric kettle is an almost indispensable household appliance. With it, you can quickly and easily boil water for making tea or coffee. It does not need to be monitored, after boiling it will turn itself off and will not waste electricity. But even the most modern electric kettle requires care and regular cleaning.

Causes of scale

The electric kettle seems to be a device that requires absolutely no maintenance. But if the technique is not given enough attention, over time it may begin to work less efficiently or even break down.

The most common cause of breakdowns is the accumulation of excessive amounts of deposits. They cover the walls and the heating element, reducing the rate of water heating.

Scale in an electric kettle is salts and compounds contained in water and precipitated when heated. It is impossible to completely get rid of this phenomenon. But a set of care measures will allow using various means as little as possible.

It is important to understand that deposits on the bottom of the kettle are not only a cosmetic problem. They significantly reduce the rate of heating and, if ingested, can cause the formation of sand in the kidneys or aggravate an existing disease.

current care

Proper daily care of the electric kettle will allow global cleaning to be carried out very rarely. In order for salts to be deposited as little as possible, it is important to observe the following requirements:

1. The container should be cleaned regularly, preferably every evening. Just drain the water and use a sponge to wash the inside.
2. Do not boil more water than necessary. Salts from the liquid remaining after heating in the kettle will compact the layer.
3. Use purified water. This will save the technique, and it is more useful for health.

So that maintenance is not too laborious, and the household appliance lasts as long as possible, it is important not only to know how to remove scale in an electric kettle, but also to do it regularly. A thin layer of deposits is much more easily affected and special tools can not be used to remove it.

Virtually any acid-containing products effectively remove deposits. For cleaning electric kettles, you can use both industrial compounds and improvised means.

Special funds

With scale on the walls and heating elements of electric kettles, ready-made compounds that can be purchased at the store in the household chemicals department help to fight. It is quite simple to recognize them, the manufacturer puts an image of equipment on the packaging, the name usually corresponds to: “Antinakip” and the like.

They should be used in strict accordance with the manufacturer's instructions, do not exceed the dosage and exposure time.

Usually the scheme is simple: the product must be dissolved in water in a certain proportion, poured into a kettle, boiled and left for a while. After that, wash the equipment and use it as usual.

As part of industrial facilities contains several types of acids and auxiliary substances that successfully fight salt deposits. It is important to know how to clean the electric kettle so as not to harm the health of the family. You can also use improvised tools that are in every home.

Lemon acid

As part of special tools is an integral component. It can be used to clean your equipment quickly and efficiently. And what is especially pleasant, such care will not cost at all.

For one treatment, you will need 1 sachet of acid containing 25 g of the substance.

You should act according to the following scheme:

1. Take a full kettle of water and pour the contents of 1 sachet.
2. Bring water to a boil and turn off the appliance. Care should be taken, as the solution may begin to foam when boiling.
3. Leave for 30 minutes to take effect. After drain the composition.

The influence is based chemical reaction converting citric acid to acetic acid.

After cleaning, thoroughly wash the equipment and boil clean water in it. This will help get rid of the smell. If necessary, repeat all manipulations.

food vinegar

The food grade vinegar found in every kitchen is acetic acid diluted to a safe concentration. With it, you can clean the kettle quickly and efficiently.

Pour vinegar solution into the kettle (1 part 9% vinegar to 2 parts water). Bring the composition to a boil and turn off the device. Leave until completely cool. After draining the active composition and thoroughly wash the container with a moderately hard sponge.

The acid will soften the scale and can be easily removed.

After cleaning, the equipment must be thoroughly washed and boiled with clean water several times. This will help get rid of the specific smell of the acid composition.

Baking soda

Soda is a fairly active substance, which can remove even a large layer of scale. It is worth turning to if a milder effect does not bear fruit.

Pour water into the kettle and add a tablespoon of soda to it. Boil and leave the composition to act for several hours. The alkaline solution will soften the deposits and they can be removed with a sponge.

If this action is not enough, you can repeat the procedure or add citric acid to the water instead of soda at the rate of 1 sachet per 1.5 liters of water. Boil the solution and leave for an hour.

After that, traditionally clean the surface with a sponge.

Carbonated drinks

Most carbonated drinks contain citric acid. It is she who will help to cope with scale in the kettle. The method of removing deposits with drinks is passed from mouth to mouth and is considered effective, but it also has features:

1. Choose colorless drinks. Dyes, especially bright ones, can leave stains that are more difficult to clean off than salt deposits.
2. Partially degas the liquid before use. Otherwise, in the process of boiling, the drink will foam, pouring everything around.
3. The drink should be poured into the kettle, boiled and left to act. In just an hour, the scale will begin to move away in layers and it can be removed mechanically.

Before cleaning the electric kettle, it is important to warn all family members about it. Liquids and compounds used for such work are colorless, they can be confused with ordinary water. A few sips of citric acid solution will not bring significant harm, but negative emotions guaranteed.

In order for the electric kettle to continue to remain an indispensable assistant, it should be cleaned regularly, preventing the formation of a significant layer of scale. It is enough to boil the acid composition every few weeks, and the heating elements of the equipment will shine with cleanliness.