The construction stapler is especially popular with furniture makers, craftsmen finishing works, as well as decorators. This tool can be operated with one hand, which is especially convenient when working on unstable surfaces or rooftops.
Such construction equipment, in terms of its functionality, is practically not inferior (and in some cases even superior) to a hammer and is intended to perform the following operations:
- drapery;
- fixing upholstery and decorating elements;
- fastening parts of the pallet;
- lining;
- joining and fixing chipboard panels;
- installation thermal insulation materials and roofing material;
- styling various kinds floor covering.
However, when choosing a stapler, it is necessary to take into account the nature of the work performed, as well as functional and technological features tool. How to choose a stapler and what indicators to be guided by, we will tell in this article.
Depending on the principle of operation and the nature of the "driving force", all construction staplers are divided into the following types.
Mechanical
This type of stapler is the most popular among furniture makers and decorators. Such a tool is distinguished by a high degree of reliability and durability, since the only part that can fail is the spring, which is the basis of a mechanical stapler.
The main advantage of such equipment is its autonomy. It does not require any hoses or batteries to function. Another advantage of this tool is that it big weight.
When choosing a mechanical stapler, you should pay attention to the design of the body. If its two halves are fixed to each other with rivets, then it will be impossible to get to the inside of the tool in order to repair or replace them. Therefore, it is recommended to purchase a stapler, the body halves of which are connected with screws.
Also pay attention to the percussion mechanism of the tool. It can consist of a twisted or leaf spring. In the first case, when working, you will feel a strong return. However, models of staplers with a twisted spring are much cheaper.
Another important attribute of a mechanical stapler are staples. As standard, the tool is equipped with U-shaped brackets of various sizes. But there are also staplers that can work with rounded staples or two types at the same time. Moreover, last option equipment can also drive small nails and pins.
Electrical
The main difference between this type of staplers and the previous one is the presence of an electric motor that performs the main work. Due to the fact that such models are equipped with an electric motor, they are equipped with more powerful springs that can create more impact power. In addition, electric staplers can be equipped with rechargeable batteries, which makes them more mobile.
Depending on the model, such a tool may have a number of additional functions, such as:
- impact force adjustment mechanism;
- system of protection against an accidental shot;
- shot depth sensor;
- simultaneous shot with two brackets.
The disadvantages of electric staplers include the limited capacity of the battery (in the case of using the tool far from the source of electricity), greater weight (up to 2.5 kilograms) and cost, compared to the "mechanics".
Pneumatic
These stapler models refer to professional equipment and have the highest rate of shot power. The principle of its operation is as follows: with the help of a compressor, compressed air under high pressure is supplied to the pneumatic cylinder, due to which the shot occurs. Air can be supplied by pressing the pedal (in more powerful models) or the trigger (manual models).
It may seem to many that such equipment is rather bulky, but this is not at all the case. Pneumatic staplers are compact in size, and their average weight does not exceed one kilogram. As “cartridges” in such tools, wide (up to 50 millimeters) staples are used, as well as medium-sized nails.
The disadvantages of pneumatic staplers include their attachment to the compressor and, accordingly, to the mains, which implies the use of such equipment only on an industrial scale.
As you can see, construction staplers are multifunctional equipment that differs, depending on the model, in a high level of reliability, mobility and versatility.
TOP rating of popular staplers
|
Marking |
Some design features |
Minimum distance between bracket and wall, mm |
Weight (without equipment), g |
|
|
|
professional | — | 2,5 | 436 |
|
|
professional | Multi-hit mode; distance stop; safe reloading system; mode of shockless descent of the lever; latch for fixing the handle in the lower position; plastic hook for hanging on the belt | 5,5 | 1024 |
| professional | Shock-absorbing rubber insert on the case; mode of shockless descent of the lever; ring for fixing the handle in the lower position | 4,5 | 886 | |
| professional | Multi-hit mode; distance stop; mode of shockless descent of the lever; mechanism for fixing the handle in the lower position; plastic hook for hanging on the belt | 6,5 | 994 | |
| domestic | Shock-absorbing rubber insert on the case; ring for fixing the handle in the lower position | 3,0 | 566 | |
|
|
domestic | Mode of shockless descent of the lever; mechanism for fixing the handle in the lower position | 4,5 | 356 |
| domestic | Wide brace; ring for fixing the handle in the lower position | 6,5 | 664 | |
|
|
domestic | Wide brace; the ability to work with round brackets; shock-absorbing rubber insert on the case; ring for fixing the handle in the lower position | 3,5 | 800 |
Now that you know all the features of this tool, you can choose a stapler depending on the nature of your work.
The table above shows the most popular models for 2015
A stapler is always on the list of tools that should be in every home. With it, you can attach almost any sheathing to all kinds of surfaces: the furniture stapler of the same copes well with textiles, plywood, film, thin plastics. But in order for the tool to really turn out to be useful and last for a very long time, it must be correctly selected. How to do it? What criteria are considered the main ones when choosing a furniture stapler?
How to choose a furniture stapler? Basic Steps
Before you go to the store for a stapler, it is recommended that you decide on some of its parameters at home. First of all, you should ask yourself these questions:
- Why do you need a stapler? It is one thing if the tool is needed for the manufacture of furniture in a conveyor mode, and quite another if the stapler is used for rare and minor home repairs.
- What type of instrument fit better? Should be studied existing species staplers and, depending on the purpose of the purchase, choose the most suitable one.
- Specifications - what should they be? It is recommended to pay special attention to the impact force parameter.
- How much can you painlessly allocate for the instrument? There are a huge number of manufacturers on the market offering high-quality furniture staplers for any budget. It remains only to find the most suitable option for yourself.
- What value for money would be acceptable? A powerful tool equipped with additional features will cost more than its simpler "brother". It is necessary to decide on your own where the line passes when even the highest performance characteristics cannot become a motivation for buying an expensive furniture stapler.
The last two points are a matter of purely personal ideas about what an instrument should be. The recommendations of specialists make sense only regarding the choice of the type of stapler and the analysis of its main parameters.
Furniture stapler: how to choose - mechanical or electric?
Most often, for domestic needs, either a mechanical or electric stapler is purchased. Which one is better to buy?
| Tool type | Principle of operation | Advantages | Flaws |
| Mechanical (manual, spring) | By pressing the lever, the user causes the spring to compress. At the moment of its unclenching, the bracket is clogged. |
|
|
| Electric | The staple is clogged due to the impact of electrical energy. The user only needs to press the button. |
|
|
Manual models - perfect option for users who periodically need to perform small-scale work. The price of mechanical staplers is quite acceptable and does not exceed 5000 rubles. (basically, the cost is in the range of 400-1500 rubles.) Due to the simplicity of the design, the risk of device breakdown is significantly reduced, which makes the purchase a really smart investment.
If a furniture stapler is needed to perform serious tasks(changes a large number furniture, room insulation), it is better to give preference to a more powerful and productive electric model. The cost of such a tool is somewhat higher and is approximately 2000-10000 rubles. (but there are also more expensive options).
There is another subspecies of the construction stapler - pneumatic. It is often used in production environments and is a fixed installation. Staples are driven into the surface by the force of compressed air, which ensures high productivity. The cost of "pneumatics" is very high, since the tool additionally needs a compressor. For home use, such a stapler is unprofitable to buy.
How to choose a furniture stapler according to the main parameters
The features of the furniture stapler are affected by its specifications. When making a choice, you need to pay attention to the following parameters:
1. Impact force. It depends on the type of stapler: the smallest for the mechanical model and the largest for the pneumatic one. But among any category of tools, there are staplers that clog staples better and worse. Looking through the assortment of hardware stores, you should dwell on models that are able to work with a longer bracket length: it is this characteristic that indicates a powerful impact force. For example, when choosing between a 4-8 mm and 4-14 mm stapler, it is better to give preference to the latter option: you can reduce the impact force, but not increase it.
2. Safety. Although the furniture stapler is quite simple to operate, it is possible to get hurt. Usually, manufacturers take care of user protection by equipping the tool with the following functions:
- inclusion only in the case when the stapler is pressed to the surface;
- auto shut-off when the staple is not fully inserted into the material.
3. Ease of use. If you have to work with a stapler for more than fifteen minutes, the comfort of using the tool will become a really important criterion. The most important in this sense are the following characteristics:
- handle features. A comfortable handle is an indisputable advantage when choosing a furniture stapler. It is recommended to hold the tool in your hands before paying for it;
- the presence of an impact force regulator. This feature is available in almost every stapler and allows you to customize the tool depending on the type of surface being treated;
- the ability to visually track the number of staples. It is desirable that the selected stapler is equipped with a viewing window. The user will be able to control the stock of staples in the process of work and understand how soon they will have to “refuel”.
4. Staples. Regular staples are suitable for working with soft materials. If you plan to upholster furniture with fabric, you should give preference to hardened ones. Type 53 U-shaped brackets are the most widely used.
Among the manufacturers producing furniture staplers for home use are Sigma, Bosch, Stanley, Novus, Neo, TOPEX, Ultra. By purchasing the products of these companies, the user can be sure of the quality of the tool.
A good furniture stapler will always come in handy. Even repair work are not held so often, the tool will justify the cost of the purchase: sooner or later there will be a use for it.
The main part of the stapler for construction works- percussion mechanism. It is he who takes on the entire load, and for this he has a tightly compressed spring (flat spring or twisted). If the stapler is mechanical, then you need to cock the spring mechanism with the effort of your own muscles. In electric models, this work is done for you by the engine, and in pneumatic models, a slightly different design (we will analyze it later, in a separate paragraph).
To bring the taker into "combat readiness", we cock the trigger or move the special lever to the far position. This action allows the striker to release, and then pull the staple out of the pack and hammer it in the right place. When the staples run out, they need to be replenished by loading them into a special store in the same way as with a regular office stapler.
The device of a construction stapler of a mechanical type.
Largely due to this design and the unique principle of operation, the construction stapler has become widely used. It's time to highlight the positive qualities of the taker for construction work:
- If, without a taker, you work with a hammer in the old fashioned way, then it will take several times more time to work.
- Thanks to the construction stapler, one hand remains free during operation. This is very convenient - for example, when working at a height and standing on a stepladder, you can stick to it.
- There is no need to press hard on the tacker. Standing on the same stepladder, you can more easily maintain balance than when working with a simple hand tool.
- Even after working for several hours, you will not get very tired connecting parts and materials - after all, physical effort will be minimal.
- Even if the part to be nailed is springy, the stapler, unlike a hammer, can easily cope with it.
- It is quite possible to work as a taker in uncomfortable places where a hand can hardly get through.
- Precise and precise transmission of impact saves the surface from damage. For example, this is very important when working with glass. The tool does not vibrate, so no scratches or chips will appear.
- Since consumables can be very diverse (staples, nails, self-tapping screws), the functionality of the stapler is increased. The advantage is that corrosion does not take these consumables.
- Since there are very few moving parts in the device, there is nothing special to break. Therefore, the tacker serves for a long time, and work with it, as well as maintenance, is very simple.
- All parts with sharp edges are securely hidden under the body, so you can’t cut your fingers or beat them off. And electric staplers also have fuses.
What is the basis of the mechanism of such a device? The furniture stapler device consists of several elements.
Electric furniture staplers are the most popular option. Connecting to the mains ensures trouble-free operation and supply of staples, saving time and effort. During the shot, the staples pierce into the wooden plane and are strengthened through the fabric in the furniture part. This allows you to hold the upholstery with staples, from which only the back is visible - a thin metal strip. The clamping point looks neat, the fabric is firmly and securely fixed in place.
This convenient fixture, which can be useful to almost everyone, not just professional builders. It often uses not only brackets, but also nails. Sometimes a furniture stapler is called a construction stapler due to the fact that it is often used in repair and construction work, when assembling furniture in factories.
Video “furniture stapler”: how to use, how to charge, and what staples are needed
Stapler classic
Great for home renovations. It has a mechanical percussion mechanism, triggered by pressing a lever. It is difficult to work with him for a long time - the hand gets tired. Fasteners - nails or staples of a flat type.
Cable stapler
Needed for fixing on walls, furniture or baseboards of electrical wires with a diameter of 4.5 to 7.5 mm. Voltage is allowed no more than 50 volts. When mounting communication equipment or laying out local computer networks, they usually use such a device.
Otherwise, the hammer-shaped stapler will come in handy where the speed of work is in the first place. For example, when roofing material is laid on the roof, or the base of the floor is insulated. Here, the staples are hammered with each blow of the hammer on the punched material. Their fixation occurs due to inertia. True, the accuracy of such a taker is much lower than that of the previous two types. But for a heater or roofing it is not so significant, but the speed - important factor.
Packing stapler
Needed to work with corrugated cardboard boxes. Staples hold cardboard together more securely than scotch tape, serving as a great replacement for it. This tool is of two types: mechanical or pneumatic.
Window stapler
Works not with the usual staples, but with metal studs. These are such thin nails, the length of which depends on the type of tacker. So, a mechanical device can hammer studs no more than 1.5 centimeters long, electric - up to 2.5 centimeters, pneumatic - up to 5 centimeters.
This stapler has the shape of the letter "V", used when you need to fasten two parts at a certain angle. For example, it can be a frame for a photo or a baguette for a picture.
On the market today you can find three main types of stapler for furniture upholstery, among them:
- pneumatic;
- electric;
- mechanical.
When the operator acts on the lever, the spring mechanism is activated. The spring expands and hammers nails or staples. If you want to find such a tool, then you should prefer a model with a collapsible body, the elements of which are fixed with screws, but not with rivets. This, if necessary, allows you to clean the tool, saving it from minor problems.
If you are faced with the question of how to choose a furniture stapler, then it is important to pay attention to the casing material, which must be durable. When it is made of steel, it is good if it has additional chrome, nickel or powder coating. But sometimes the case is made of modern light alloy, which is the best solution.
However, you can use an alternative solution and purchase a cordless stapler. It will be quite weighty, the operator's hands will get tired after a while. Any electric model will be much heavier than a mechanical counterpart. Before choosing a furniture stapler, you must consider what to pay for electric model will have a fairly high cost. Therefore, if you purchase the device for personal needs, and you will use it from time to time, then it is not recommended to spend so much money on it.
The construction stapler has many other names due to the different fasteners used and functional features, the main of which are as follows:
- staple gun;
- nailer;
- staple gun;
- tacker;
- stapler.
In any case, the device performs the following tasks:
- connects identical parts to each other, while the brackets are bent;
- joins together different materials, for example, plastic, plywood (nails them).
The staple gun is widely used among furniture makers, builders, and decorators. The device can be easily held in one hand during operation. In practice, it replaces the hammer, while the efficiency and productivity of labor increase, and workers are less tired.
With the help of a stapler, the following work is performed:
- lay the roof;
- attach glazing beads to windows;
- fix insulation, roofing material, film and similar materials;
- fixed to the surface different materials wires and cable;
- make drapery;
- attach furniture upholstery and decor;
- assemble or repair pallets;
- perform facing works;
- connect sheets of plywood, chipboard, OSB, fiberboard and other sheet materials to the frames.
A furniture stapler, like other types of tools, allows you to perform many more different work operations. In many cases, when you need to attach something, you can use a staple gun. The device is constantly used for upholstery of surfaces of different materials.
The main criterion for dividing staple guns into separate groups is the type of energy that underlies their functioning. On this basis, the following types of staplers are distinguished:
- mechanical;
- electrical;
- pneumatic.
Each type of product has its own characteristics (pluses and minuses), which determine the area of application. Consider which tool is best suited for a particular type of work.
Not everyone knows how to choose a furniture stapler. It is worth noting that choosing such a tool, you need to consider that it has many varieties. Therefore, you need to take into account the operating parameters and characteristics of the technical details with which you will work, as well as the device of the furniture stapler itself. Having studied all the nuances, you can go to the store and buy a furniture stapler.
A manual furniture stapler is a mechanical tool that is worked with by applying physical effort. Main plus hand tool- this is its mobility and independence from electricity, as well as from other energy sources. The requirement of physical effort is the main disadvantage manual stapler, since with large volumes of work on upholstery of furniture, a huge amount of time is spent.
An electric furniture stapler is a tool that works with electricity or a battery. It is best to use this type of unit for medium-sized upholstery work. The main disadvantages of this type of stapler are: the low rate of fire of the mechanism, the weak impact force of the tool, as well as its rather rapid wear.
To work with industrial scale furniture upholstery, a pneumatic furniture stapler is used. Since it is fast, durable and strong compared to other types of similar building units.
To avoid injury furniture stapler how to use such a tool, it is important to thoroughly understand. If you are using a mechanical stapler, first adjust the screw adjuster. Adjustment should be made on the rough material by turning the knob from minimum to maximum. If the fastener does not enter the material from the first blow, then you will need to re-adjust your furniture stapler, and if it does, then you start working on the “finish”. You should know in advance how to charge a furniture stapler. This can be found in the instructions for the unit.
YouTube: please enter a valid link
To drive staples at the right distance, it is best to mark such places in advance with a pen or pencil. You can also use a latch, which must maintain the same distance when driving in fasteners without prior marking.
Don't forget to also hold the material while making shots so that the material cannot move out when the staple is driven in. Do not forget to also monitor the presence of staples so as not to be left without them at the most inopportune moment for you.
When the tool is not in use, secure the handle with the safety lock. That's how it's supposed to be for safety reasons. When performing these simple recommendations, you can easily handle the upholstery of a sofa or other necessary task associated with a furniture stapler, the price always depends on the type of tool and its manufacturer.
Furniture stapler - is a tool with which you can fix parts consisting of non-solid materials. As fastening, special brackets are used. They come in different sizes and can be made from different materials. The tool itself has many modifications and types.
Sometimes a stapler is called a tacker, stapler, staple gun, etc. It is very popular and in demand. After all, in addition to upholstery work, with the help of a stapler, you can solve many different tasks.
With it, you can attach PVC panels to the ceiling or wall, fix the greenhouse film in the country and much more.
Furniture staplers are produced different types. Going to the store to make a purchase, you need to clearly understand for what purpose the tool is being purchased. And what parameters should it have.
- A hand stapler is a mechanical tool, you have to apply physical force to work with it. Its main advantage is mobility. It is also independent of the mains and other energy sources. However, the use of physical force is also the main disadvantage of the tool. With large amounts of work, you can quickly get tired and it will take a lot of time to solve the task. This tool good for small operations for upholstery of furniture at home. Enterprises do not use it. Quality tools are made by Gross, Matrix, etc.
- Electric furniture stapler - to work with this device, you need to be powered by electricity from the mains or from a battery. This tool is used for medium-sized jobs. With its help, work can be done at a professional level. Among the shortcomings of the electric unit, one can single out a weak impact force, low rate of fire and rapid wear of the mechanism.
- In production, pneumatic staplers are used for upholstery work on factory-scale furniture. They are fast, durable and strong compared to other types of staplers.
Electric construction stapler
Quite often, consumers decide how to choose a furniture stapler for the home. In order to get an answer, it is recommended to consider mechanical models. They are low cost and will be affordable for every consumer. Such a tool is suitable for doing homework in small volumes.
However, if you are engaged in furniture upholstery at a professional level, then it is better to consider another type of device, because you won’t be able to work quickly with such a tacker, your hand will get tired from prolonged effort. Experts recommend that professionals consider pneumatic or electrical devices.
Before choosing a furniture stapler, you should pay attention to electric models that are more expensive, but are distinguished by reliability and speed of work. By pressing the button, you will activate the percussion mechanism. It doesn't take much effort to do so. Even a fragile woman or child can cope with such a task.
Things will go faster if you use such a mechanism, abandoning the mechanical option. Yes, and the materials will be able to break through more solid, and the connections are quite strong and reliable. You can understand how to choose the right furniture stapler by looking at networked electrical models that have a cord.
Mechanical type staple guns are products with the simplest device when compared with analogues. The mechanism works from the impact of the force of the hands. The performance of the tool is low, but it is distinguished by relative durability and strength.
Design
The spring is the main structural element mechanical type staplers. It can be spring (lamellar) or twisted type. If the tool is equipped with a spring of the first type, then it is considered to be of better quality, since its return is lower, and less noise is produced during operation. But devices with twisted spring mechanisms are cheaper.
One of the main components of the tool is also a mechanism that adjusts the breakdown force of the device. Adjustment is carried out by a switch or a wheel. Regulation ensures the adjustment of the product to the degree of hardness of the working material.
To the store mechanical tool you can insert the following consumables:
- U-shaped or U-shaped brackets different sizes(thickness, length, width of legs);
- pins;
- small nails.
Staples can be inserted only one of any type or both, there are also modifications designed in addition to nails with pins. The latter option is more versatile and is more popular among builders. But in mechanical devices, the clip under the bracket is small, so fasteners are inserted only in a small amount. When performing work operations with solid materials, it is required to apply sufficiently large physical efforts.
Pros and cons
Mechanical devices are simple in terms of maintenance: it is enough to periodically lubricate the working units. The regularity of applying the compositions is determined by the intensity of operation and is given in the instructions. At the same time, the simplest types of lubricants are suitable.
If we consider a mechanical professional stapler, then it is quite expensive, but it has a lot of power. This allows you to work with hard materials. Such models can withstand heavy operating loads. They are almost comparable to electrical and pneumatic counterparts in terms of performance.
The main advantages of mechanical staplers are their low cost, if we consider options for domestic use, as well as autonomy. The tool does not have any batteries, hoses, power cords.
An electric stapler is more functional than a mechanical counterpart. useful work performed by an electric motor. Fasteners fly out after pressing the trigger. The impact force of the mechanism is also determined by the power of the installed spring, but only it is stronger than that of mechanical staple guns, so larger consumables can be used here. Working with power tools does not require much effort.
The product range is represented by network and battery models.
network models
For the operation of network staplers, a 220 V supply network is required. At the same time, the presence of a cord limits freedom of movement, and an extension cord often has to be used. It is also possible that if the tool and the power cord are damaged, you will receive an electric shock. To protect against this, the electric stapler is equipped with a plastic case with rubberized grips on the handle, and its cord is made with two layers of insulation.
Electric versions of the middle price range usually fire from 20 to 30 shots per minute. This parameter is important for productivity.
Cordless tools do not have these disadvantages. It is characterized by mobility, but weighs more than network models. Modifications with batteries can use fasteners up to 30 mm long. With one battery charge, you can make about 1000 shots (the rate of fire reaches 30). The weight of the devices is in the range of 1.7-2.5 kg.
Electric staplers for furniture and household use are more expensive than mechanical tackers, and battery models are even more expensive. Battery staplers will cost significantly less if you purchase them without a battery with a charging unit.
The electric professional stapler has a number of additional devices and functions:
- device for getting stuck fasteners;
- the ability to control the impact force;
- a protective mechanism that prevents the possibility of performing an involuntary shot;
- the possibility of carrying out two brackets of impact and controlling the frequency of the pulse;
- the shot is carried out by pressing the tip of the tool on the material.
Household models are only partially equipped with these functionalities.
The law of comfort in the house is simple - furniture should be comfortable and beautiful. Unfortunately, upholstered furniture quickly loses its original appearance compared to wood - the upholstery gets dirty, rubbed, torn.
What to do if this happened to your favorite sofa or chair? It’s a pity to throw it away, because it’s so comfortable to sit on it. For many, an interior item becomes a true friend for decades, so you can give it a chance for a second life - just replace the upholstery. And you can do it yourself, spending a minimum of funds.
To do this, it is enough to consider new design, choose the right fabric and arm yourself with a furniture stapler.
The most rational would be to buy a mechanical stapler: it is lighter in weight than an electric stapler, which greatly simplifies the work. In addition, it is independent of the power supply.
The tool works very simply: a clip of fasteners is loaded into the magazine, the working part is brought to the installation site of the fastener, when you press the handle, the bracket flies out and sticks into the material. So you can attach soft upholstery to a wooden frame, stitch sheets of chipboard or plywood together.
This is an indispensable tool for a furniture maker, but more and more often it is used in everyday life. The simple design makes it easy to use even for a beginner and eliminates all sorts of breakdowns that often happen with electric and pneumatic counterparts due to improper operation.
The service life of mechanical devices can reach 6 - 8 years, so the purchase costs will justify themselves, and the tool will help you out year after year.
Have you decided to buy a furniture stapler for your home workshop? Or are you planning to open your own furniture manufacturing and finishing business? In this case, it is necessary to take seriously the issue of choosing a tool that is optimally suited to the scope of work and upcoming tasks.
First of all, you should decide on the purpose for which the tool is needed. It's one thing to buy a furniture stapler, and another to buy a construction stapler. Different jobs require different tools. But before talking about his choice, they decide how the fasteners will be installed. There are two ways.
- The materials must be punched through, and the ends of the staple must be bent. This is most often done when joining materials: fabric, including banner, tarpaulin, film, etc., as well as when bending the edges of the canvases.
- The upholstery and wooden base breaks through. In this case, the ends of the bracket are recessed into wooden base, and the back of the fastener remains on the surface. This is required, for example, when upholstering furniture, attaching a film to a greenhouse frame, wall cladding plastic panels, fixing thin plywood on a wooden base, connecting small wooden parts during the assembly of boxes, frames, etc.
Each stapler is designed to work with staples of a certain size and shape. This determines its purpose.
If the fasteners required for a particular task do not fit the tool, we can assume that the money for it is thrown away.
Staple sizes
It's important to know! The thicker materials have to be connected, the greater the driving depth should be - fasteners with a greater height are selected.
Pneumatic devices
The pneumatic construction staple gun is the most powerful tool of the previously discussed devices. At the same time, the pneumatic stapler is arranged simply. It is characterized by durability, it is not difficult to operate. Tool maintenance consists of periodic cleanings.
Device
Nails with staples fly out under the action of compressed air energy. There are no springs in this mechanism. Its main working unit is a pneumatic cylinder, into which compressed air is supplied using a pneumatic distributor.
Industrial equipment also needs power supply. Energy can be taken from the network or from a battery - the latter option is more autonomous.
Working pressure is the most important parameter. It differs for different models. Mean given parameter is from 4 to 8 bar. Also, a pneumatic-type nail-staple gun is characterized by air consumption for a single shot.
In practice, the following types of pneumatic products are used:
- stationary, where air enters when the pedal is pressed;
- manual, where the flow of compressed gas is provided by pressing the trigger.
Pros and cons
The main advantage of pneumatic tools, in addition to power, is its high productivity: the rate of fire is 1 shot per second. In this parameter, the products are superior to electrical with mechanical. In terms of mass, manual pneumatic devices correspond to manual models (its value is about 1 kg). The tool has a compact size.
The pneumatic tool can work with staples up to 50 mm in size. It is also designed for finishing nails and medium-sized fasteners, while the magazine holds a large number of them.
A pin-staple gun powered by compressed air, in addition to the functionality of electric models, also has its own characteristics:
- blocking system;
- fastener jamming device;
- the possibility of multiple strikes;
- two ways of starting (separate and contact);
- impact adjustment.
Some inconvenience during operation brings a high-pressure hose from a compressor or compressed air cylinder: movements are limited. Also, the compressor unit can work noisily, which affects the general condition of users.
The weak point of compressed air products is the o-rings. They wear out fairly quickly, but replacing them is not difficult, and besides, they have a small price.
When working with hard joints such as chipboard or especially dense woods, it is most effective to use reinforced staplers. Usually they require large and strong brackets - to clarify their length, you should look at the characteristics of the unit. If one type of stapler can drive staples up to 8 mm long into furniture, then reinforced ones - from 14 mm or more.
Purchased device, staples right size picked up. How to fill a furniture stapler with your own hands?
- print the box with staples;
- take out a separate block of fastened brackets - you should get it carefully, they can come apart;
- open the stapler with both hands, holding it in your left hand, pull the spring;
- put a block of paper clips into the free groove;
- close the device.
Some models have a different filling principle - they have a retractable chute that comes out when a special button is pressed. This gutter must be taken out, taken in hand and the bracket row inserted with the ends down. Next, the filled chute is inserted back into the apparatus until it clicks.
Then you should make a control shot to check the quality of the stapling. This will position the staples even if they were inserted incorrectly during threading. If a jam occurs, the device jams, you should remove the jammed staples, re-carry out the refilling procedure. The check is made on the matter by clicking two or three times on the test of the apparatus. The device is ready for use.
Pneumatic instrument
If you need a furniture stapler, how to choose, the price will let you decide. On average, it is 500 rubles. But it is also important to take into account the purpose, as well as the operating conditions. For example, for stationary use, a pneumatic stapler is more suitable than others. It is quite comfortable and functions due to the air, which is under pressure.
Such a tacker performs its task with lightning speed. The pneumatic model weighs much less compared to the electric one. But in this case, there is a catch, expressed in the fact that, along with the stapler, you will also have to purchase a compressor, having paid additional funds for it. This option is best purchased for stationary work. Pneumatic models are purchased for production conditions.
If the furniture needs to be sheathed at the factory, it is better to equip workplace using this option, because the stapler and compressor do not need to be moved anywhere, in addition, pneumatics allow you to work quite quickly, providing an excellent result.
Pros and cons
But the pneumatic unit requires accompanying equipment - a compressor that creates pressure. Therefore, such a model can be considered stationary and used in one area of work.
Powered by compressed air. This is what ensures its high performance. Demanded in production conditions.
The pneumatic stapler has a high cost, therefore it is unprofitable for domestic use. In addition, in this case, a compressor is needed.
This type of tool is mainly used in the production of medium and high power. It is highly productive: a speed of 50-60 staples per minute is the norm. The pneumatic construction stapler differs in structure: there is no spring, the impact occurs due to the energy of compressed air.
When choosing, you should also pay attention to what kind of fasteners this unit can work with. By the way, they can drive even longer staples and nails - an average of 50-80 mm, but you can also find those that work with 100 mm nails.
For this equipment, the most important parameter is the working pressure. The minimum is 4 Bar, on average - 5-6 Bar. Accordingly, the compressor must guarantee the required pressure.
Of the positive aspects - the low weight of the gun - only about 1 kg. And despite the fact that they are mostly made of steel.
Overview of popular models in different categories
Before choosing a furniture stapler, you must also consider the status of the manufacturer in the market for the relevant products. It is important to pay attention to the purpose and additional features that are not always needed in everyday life. That is why a number of consumers choose the Piranha X70005 household stapler, whose weight is 566 g. The rubber insert has shock-absorbing characteristics, and on the body there is a ring for attaching the handle in the lower position.
Another household model is Rapid R453, it weighs less than 356 g, has a shockless lever release mode, and also allows you to fix the handle in the lower position, as in the above described version. Additionally, this stapler has the ability to work with round staples.
But if you need a professional tool, then you should pay attention to the Arrow JT21CM. This model weighs 436 g, but some consumers note one of its minuses, which is expressed in a not very comfortable handle, it slips off during operation.
Quite often, home craftsmen and professionals are wondering how to choose staples for a furniture stapler. They are the simplest, in this case their depth varies from 4 to 8 mm. Such consumables will not cost so much. They are designed for simple jobs. It will be possible to pierce paper and fabric with them.
You can choose options ranging from up to 10 mm. They are used in semi-professional staplers. Some models use 140 type staples, they are thicker and have a thickness of 1.2 mm. In this case, the width reaches 10.6 mm. You should not purchase type 53 staples for such staplers, as in this case the equipment will shoot 2 staples at once. Therefore, it is important to ask what type of staple the tool uses.
Semicircular brackets are intended for clogging the cable. But if you have a stapler from Stayer, then you should know that it supports four types of staples at once: 143, 100, 500 and 36. If you have already decided which furniture stapler to choose, you should pay attention to consumable material, which is hardened, and is used for glued wood or strong chipboard. Typically, these consumables cost twice as much as usual.
Pros and cons
Staplers for construction work are conditionally divided into household, semi-professional and professional models. The difference between them lies in the greatly expanded functionality of the latter: the presence of a variety of settings, several operating modes, as well as a large operational resource.
Household products are often made of plastic. They have little workforce. Professional devices are the most reliable. They are made of metal (plain or stainless steel). From plastic, they only have handle linings that soften the recoil.
Semi-professional equipment occupies an intermediate place in terms of quality, as well as price. Products from this category are a good choice for domestic use. They have wide functionality that allows you to perform an extended range of work at home.
The general criteria for choosing construction staplers are:
- the possibility of disassembling the tool body;
- the dimensions of the fasteners used;
- the location of the handle (the closer it is to the body, the more convenient it is to work);
- the ability to perform regulation of the force of the punching mechanism;
- the presence of a double impact (important when working with hard materials).
Each stapler model is designed only for a certain type and size of fasteners: nails, studs or staples. This factor must be taken into account, as it shows the scope of the tool.
Mechanical staplers are the most affordable option to use at home. Models equipped with a twisted spring are the cheapest. The possibilities of mechanics are sufficient for many operations. It is recommended that a mechanical type furniture stapler (and indeed any) have a collapsible design. This will make maintenance easier.
If you need to do relatively large amounts of work at home, then it is recommended to use a more expensive and functional power tool - this will save time and effort. When autonomy is important, battery or mechanical models are suitable. As for battery models, it is required to prefer modifications with high-capacity batteries that can be quickly charged. It is good when the equipment contains spare batteries.
Construction staplers are produced by well-known manufacturers of construction tools, for example:
- EINHELL;
- SPARKY;
- Bosch;
- METABO;
- STURM;
- NOVUS;
- Intertool.
The rating of products of these brands has been very high for many years. Among the manufacturing countries, the highest quality staple guns are produced in Germany and Japan. When asked to “advise which stapler to choose for domestic or professional use,” you can confidently point to the products of the listed companies in the corresponding category.
STURM ET4516
The model, according to customer reviews in 2017, ranks first in the popularity rating among budget options. Like all products from STURM, the tool is distinguished by high-quality assembly, as well as component parts. Energy is the driving force electric current. The model is connected to a stationary network with a voltage of 220 V.
Bosch PTK 3.6 Li (0603968120) - this German-made staple gun belongs to battery models. High quality provides reliability, durability of the tool. The model can only work with 11.4x(4-10) mm staples. The stapler Bosch PTK 3.6 Li (0603968120) has a high rate of fire, which makes it possible to increase labor efficiency when using it. The modification is equipped with a 3.6 V battery with a capacity of 1.3 Ah. In terms of security, the tool surpasses network counterparts.
Intertool RT-0104
Among mechanical models, Intertool RT-0104 is popular with consumers. The stapler with a cassette magazine features a reliable, simple design. It is universal, allowing the use of studs (pins), nails, staples (maximum width 11.3 mm) with a length of 8-16mm, 8-16mm, 6-14mm, respectively.
In order for the purchased stapler, for example, for furniture, to serve for a long time, it is necessary to use branded consumables. It is necessary to regularly clean the operated device from contamination, and lubricate the mechanical models. When choosing products, it is mainly required to build on the area of \u200b\u200btheir future application.
The principle of operation of the device is to use staples that are loaded into the mechanism and, by pressing the trigger, fix the fabric on the case.
The product is able to work with soft materials fixed on a wooden structure. The product allows you to quickly provide excellent bonding of soft materials on wood.
A quality tool has the following positive characteristics:
- it takes less time to reupholster furniture than when working with a hammer;
- you can use the gun with one hand, and the second to help yourself at work;
- the tool can be used even in hard-to-reach places.
The listed advantages are only a small part of all the advantages of working with the device. Today, the range of staplers for furniture is represented by a variety of types that differ from each other. internal design:
- mechanical staplers - such models have the simplest mechanism of operation that does not require the use of special skills. The device of the tool consists of a spring, which, when the trigger is pressed, shoots staples at the furniture. The simplicity of the product is the key to its durability. Models are used for home furniture upholstery, they are ergonomic and do not need a network connection or additional accessories;
- the electrical counterpart is a sophisticated version of the manual stapler. The mechanism of such a device is based on the principle of operation of the motor, with the help of which the impact force of the bracket increases many times over. With the help of the model, the hauling is faster, the stapler is also used around the house and household. The tool is powered by electricity, which limits its mobility, but this nuance is solved through the use of batteries;
- pneumatic tool - is considered the most powerful option for a stapler for furniture. The model works from compressed air, there are no springs in the design, instead of them, manufacturers equip the tool with a pneumatic cylinder. When you press the pedal, air is supplied, and the distributor sends it to the cylinder. Products are heavy, but are the most durable. This best choice for furniture factories, when work is carried out at a fast pace.
Alternative Solutions
More convenient will be the Novus J-19 EADHG model, which has a rubberized handle and weighs 1024 g. This professional tool has a multi-hit mode, a safe reload system and a distance stop. To fix the handle in the lower position, there is a special latch, and a plastic hook allows you to hang the tool on your belt if necessary.
Self use
The furniture stapler, whose manual always explains in detail how to work with it, is an excellent tool for realizing any creative ideas in the field of interior design and furniture decoration.
Having figured out how to use this device, the furniture owner has unlimited possibilities for decorating his headset or individual interior items at his discretion.
So, we figured out how to use a furniture stapler.
Construction staplers are also called furniture staplers. They are increasingly being used in construction, furniture production and the economy. Used for punching and fastening various materials. The tool simplifies many operations. So that the hand does not get tired, in some types a battery, a mains connection or a pneumatic mechanism are provided. Due to this, the work is significantly accelerated. For many models of staplers as consumable, in addition to conventional staples, nails and round staples are used to attach wires. The impact force and penetration depth are controlled by special regulators. This increases the accuracy of the work. To select and operate such a device correctly, you should know some of the nuances.
The principle of operation and purpose of construction staplers
A stapler is a device for attaching sheet material to a base. A construction stapler looks like a pistol.
Its action is similar to driving nails with a hammer. To play a blow, you need to pull the trigger or cocking lever, depending on the type of instrument. And then release the trigger. With the help of a system of springs located in the body of the gun, the clip is fed from the clip into the outlet channel and is instantly driven into the material. At the moment the trigger is released, the bracket moves to the exit. Therefore, in the passive state of the stapler, the equipment is already ready for clogging. In some models, the legs of the staples are bent, in others they are simply driven in. Not only brackets, but also nails can be used as equipment. special effort There is no need to apply, so the process is easy and fast. It can be used by women and the elderly.
The stapler is designed to perform two types of tasks, which expands the scope of the tool:
In both cases, the fastening is reliable. To increase its resistance to deformation, a consumable is used, in which the sharpening is performed asymmetrically, or the coating is melted.
Staplers are used in various industries:
- in construction;
- when renovating premises;
Nailing baseboards with a stapler
- for the production of furniture;
Upholstering furniture with a stapler
- when laying a cable;
- in the production of packaging;
Stapling cardboard with a stapler
- for the manufacture of greenhouses at their summer cottage.
Types of furniture staplers
Varieties of staplers according to the type of effort applied:
- mechanical or manual. Operated by hand. Low power is a disadvantage of such devices. But there are also advantages: light, cheap, compact. Mechanical staplers are reliable in operation, as they consist of only a body, a lever and a spring mechanism. There are two types:
- electrical. There can be two types:
- pneumatic. The most powerful staplers. They work with compressed air pressure. They have a hose for connection to the compressor, and sometimes an electric cable. Therefore, they are inconvenient for domestic use. Used in manufacturing and construction. They have a high cost.
Mechanical staplers are:
Stapler classes:
- household. These are mechanical and cheap low-power models of electric staplers;
- professional. These include more powerful electric and pneumatic tools.
Types of staplers by type of equipment:
- stapled. Used for domestic work;
- nailers. They are used for professional and household activities. Work with large staples and nails. Tooling length over 12 mm;
- universal. They can work with flat and round brackets, nails and hairpins.
For the optimal choice of a stapler, you need to solve the following tasks for yourself:
- frequency of use of the tool: every day or from time to time;
- places of use: indoor, street. Is there electricity there;
- do you need the accuracy of driving equipment;
- materials you plan to work with.
Depending on the purpose and working conditions, choose the type of stapler:
- for infrequent work with non-solid materials, a mechanical stapler is suitable;
- if you don't need precision in staple placement and have the ability to swing, then consider choosing an impact stapler. He is light. Attaches to the mounting belt;
- for large volume work in places where mobility is needed, take a closer look at the cordless tool;
- if you work indoors with a power outlet and do not want to overpay for a battery, buy a stapler with a mains connection;
- if you need a stationary powerful device, do not hesitate to take a pneumatic tool.
What characteristics to look for when choosing a stapler:
- the presence of an impact force regulator. A mechanical tool has two types of regulation: minimum and maximum or smooth adjustment. Electric has up to 6 modes. The setting is made with a software switch. The thinner the material, the less power impact, otherwise dents form;
- Double punch. Only electric staplers have it. For hard materials, a large tooling is used that will not clog immediately. The double strike mechanism itself detects this and works a second time. If there is no such mechanism, then you will not immediately see that the nail heads are not fully clogged;
- removing fasteners with a stapler. If there is this function, then to remove poor-quality clogged equipment, you do not have to do it manually or with a nail puller;
- case material. Structural steel staplers weigh more than plastic;
- rubber inserts on the handle. Their presence reduces the recoil of the tool, and the hand gets tired less;
- battery type:
- nickel-cadmium are suitable for low temperatures. But they have a memory effect, so they are quickly discharged. They are used in inexpensive models;
- lithium-ion. They hold a charge longer, but they tolerate mechanical impact worse;
- nickel metal hydride. Lightweight and have a large charge resource;
- number of hits. The operating time of battery staplers depends on this characteristic;
- tool power. It depends on the number of beats per minute. With an increase in power, the speed of the device increases;
- fastener type. Choose a stapler with fasteners that suits your needs.
Choice of staples for the stapler
When shopping for staples, you need to know which staples fit your stapler. The type of equipment is indicated on the packaging, in the instructions and on the body of the tool. Staples have characteristics that must be considered when choosing:
The most common consumable is U-shaped brackets marked "Type 53". Found their application in furniture upholstery textile materials and in the connection of wood products, plywood, chipboard and hardboard. Staples of the 140th type are in second place in demand. They are shorter and thicker. Due to the increased area of contact with the material to be joined, the likelihood of material rupture at the point of attachment to the base is reduced. Therefore, they are convenient when working with fine details: fabrics, PVC film, as well as with wood, plywood, chipboard and hardboard. Half round braces are of two types.
Types of semicircular staples
Two characteristics are important for a stapler: shape and size. And you choose the type of sharpening for yourself. By the size of the snap, you can judge the purpose of the stapler.
Examples of types of staples and nails for staplers
How to load staples with your own hands
To refill staplers of different types, follow these steps:
- conventional mechanical:
- shock mechanical:
- electric:
- pneumatic:
How to charge a mechanical device: video
Setting and adjustment
Staplers of different types are configured in different ways. But the principle of action is the same: with an increase in thickness and hardness, it is necessary to increase the impact force and the degree of pressing.
Malfunctions and repair of construction staplers
Two frequent breakdowns a mechanical stapler is an idle hit and a weak hit.
Blank blow elimination
The reason lies in the development of the striker. He ceases to cling to the bracket.
Weak hit elimination
How to eliminate a weak hit: video
Replacing a piston in a pneumatic device
Disassembling a pneumatic stapler and replacing a piston: how to repair everything quickly
A stapler is much more convenient to work with than a hammer. It is indispensable in the conditions limited space. The tool is simply set up and recharged. Using a stapler greatly facilitates and speeds up the work. Check out the specifications and features of the selection to find the right device for your needs.
There is a wide variety of different models tool ov necessary to simplify life. stapler one of them. It has been popular for many years.
The furniture stapler is a fairly versatile tool.
There are many modern types. Each of them is designed for a specific type of work, ranging from simple to industrial use. In everyday life, furniture is often used stapler.
With it, you can not only perform the procedure for upholstery of furniture, but also a number of other construction operations.
The mechanism of the device consists of several important details. Electric models are the most popular. It is connected to the mains and they can work.
Such a stapler allows you to significantly save time and effort, because the supply of staples is carried out without interruption.
When the shot is fired staples but flies out and enters the wooden plane. Passing through the material, it is fixed in the piece of furniture.
So you can securely hold the furniture upholstery.
staple are practically invisible.Only their backs are visible, which look like thin strips of metal. The fabric does not tear, it is firmly fixed in the right place.
The place where the clamping occurs looks neat.
stapler is convenient tool ohm, necessary not only for builders. It is great for use in Everyday life. Can be used not only staples, but also nails.
There are several different types stapler ov. Before you buy this product, you need to carefully understand all the varieties.
Knowing the features of all options, you can choose the most suitable.
Among the types available on the market are the following.
Before starting work, it is recommended to carefully understand the operation. Mechanical needs to be adjusted before use. A draft canvas is best, on which you can take test shots to set up your equipment.
Change the regulator on the instrument to get the result you want.
It is necessary to mark up the placement in advance staples . This will help to achieve the same distance between them. When the shot is fired, be sure to hold the material. Regularly check how much is left in charge stapler.
If the tool is not needed for some time, put it on safety.
Advantages and disadvantages
Any equipment has its own advantages and disadvantages.
It is important to note each of them so that you can make the right choice.
To the advantages of mechanical stapler includes:
- Price;
- it has a simple design (this parameter is important, since the simpler the tool , the less often it will break);
- Mobility;
- Possibility of safe use.
The disadvantages of this type of equipment include the following factors.
- To work with him, you need to apply a lot of physical effort.
- Differs in low speed.
Mechanical stapler.
The advantages of electric include the following advantages.
- Working with him, you do not need to make physical efforts;
- Has a high speed of work;
- Tool has high power.
Among the disadvantages of this type of equipment are:
- The cost is higher than that of a mechanical one;
- A connection to electricity is required (because of this, it can work on a limited radius, it all depends on the length of the wire);
- Heavier than the previous type.
Electric stapler.
To the positive features of the pneumatic stapler and should include:
- The speed of work at a high level;
- Has great power.
Among the shortcomings of this type of equipment, the following are noted.
- Compressor required. This affects the cost, weight and dimensions.
- In most cases it is used as a fixed installation.
Pneumatic stapler.
How to choose a quality mechanical stapler?
The mechanical unit is not too different complex design. But it has certain features, on which the convenience of work directly depends.
- Transparent shop. This is a handy option that allows you to control how much is left in the device. staples.
- Impact force regulator. This allows you to adjust the equipment depending on how dense the material is. Makes the job much easier.
- The narrow working tip of the device helps to ensure the accuracy of the shot.
- To ensure safety, there is a stopper on the handles. This will help avoid accidental shots.
- Handle with rubber base. It will help tool u don't slip in your hands. This will make it easier for you to operate the equipment.
Mechanical stapler.
How to choose a quality pneumatic stapler?
First you need to decide on the range of planned actions. From the conditions in which it will be applied tool , the amount of consumables and the condition of the working surface depend on the parameters that you need to rely on when choosing. For the production of furniture, universal models are suitable, where a balance of efficiency in the performance of work and ergonomic qualities is observed.
Super universal stapler Stanley Fatmax TR75.
If you plan to use the unit in everyday life, it is better to choose an entry-level pneumatic model. Such equipment allows targeted activities with small hardware. If you plan to work with textiles, such tool but it will be sufficient.
Plywood requires a pneumatic nailer.
How to choose staples for a furniture stapler
For right choice refer to the instructions that come with tool y. It is worth considering certain parameters in order to choose the appropriate option. The following parameters are important.
Types of staples of a construction stapler.
Attention! Some sellers may advise you to replace one type of staple with a similar one. These recommendations should not be followed. The depth of the models may be the same. However, the geometry, which is difficult to see with the normal eye, may differ. Ultimately, this will cause a breakdown.
Charging the mechanical stapler
With mechanical stapler it's pretty easy to work. You need to know how the charging process goes. It includes several steps.
- The unit must be on fuse.
- On the back of the equipment, the sash should be folded down. Behind it is a groove for staples.
- From this area, you need to pull the rod with the spring.
- Staple block should be turned back to the handle and inserted into the groove.
- Return the rod to its original position. It is necessary to carry out the clamp staples inside the tool.
- The sash must be slammed until you hear a characteristic click.
The charging process is completed, you can use the equipment.
Charging the pneumatic furniture stapler
The pneumatic device differs from other models by good impact force, high reliability and fast operation. To use it, you need to take an additional compressor.
The compressor helps to create the required pressure.
For standard household chores, this type is not suitable. It's better to use a simpler model.
If you decide to open a construction or furniture company, then such a stapler is quite suitable.
To charge the pneumatic, you must do the following.
- The unit is blocked. This will help to avoid accidentally turning it on, so press the button that opens the tray where the staples s. Depending on the model, the lid of the tray may open or pop out of the handle by itself.
- Re-check that stapler continues to be on safety.
- staple you should put in the tray, their legs should be positioned towards you. After installing them, check that they lie in a level position.
- Close the tray.
working side tool should be turned over to the material.
Remove the lock and get to work.
To carry out home furniture repairs, a mechanical one is better suited. stapler . For larger projects, you should choose an electric model. When opening own production it is recommended to purchase pneumatic. Choose the type should be based on the planned type of activity. This is the main setting.
Refueling equipment is easy. This is easy to deal with at home.
It is only important to observe safety precautions. Put the unit on safety first.
VIDEO: Types and application of construction staplers.
VIDEO: How to charge a furniture (construction) stapler.
History of sky lanterns
Job description: concept, purpose, structure, procedure for compiling and formalizing Purpose and content of job descriptions for managers
Interview questions What job are you going to work on?
What to do if the boss criticizes all the time If the boss does nothing
How to understand: will the kitten be fluffy?