Lining for a bath which is better and cheaper. To make shelves from abash or aspen? An overview of the properties of wood for shelves - from species to cut shape

23.06.2020

One of the most heated debates around the Russian bath is related to the choice of the best type of wood as the main one. building material. Most of these discussions, one way or another, are connected with two species - linden and aspen. Although other materials can be used for construction - alder, cedar, larch, etc.

Moreover, this question arises twice: the first time - when determining the material for the log house, and the second time - when lining is selected for finishing the heart of the bath - the steam room. To answer the question: linden or aspen for a bath - which is better, it is necessary to consider the advantages and disadvantages of each of the wood species.

Linden

A sufficient number of connoisseurs and connoisseurs of the classical Russian bath consider linden to be the most traditional and best material in terms of its characteristics.

Advantages:

Sufficiently light and soft wood, convenient for processing, and, as a result, the construction of this material is less labor-intensive;
Fast heating due to the low thermal conductivity characteristic of this type of wood;
The absence of shrinkage with properly executed drying of logs, which allows, after the completion of construction, to start operating the bath almost immediately;
The presence of extremely healthy essential oils and resins, which give a special microclimate to all the premises of the log house. Linden wood (especially in combination with lime honey) has a beneficial effect on colds, nervous disorders, and is useful for almost everyone. internal organs person.

Flaws:

Low resistance to decay, which even with additional processing leads to a relatively rapid emergence of fungi and possibly harmful insects. Together with the insufficient density of wood fibers, this entails a decrease in the service life of linden log cabins;
The relative high cost of the material. Linden is noticeably more expensive than spruce and pine wood and, its main competitor, aspen.

Aspen

Advantages:

Ease of processing and low mass of material;
No drying and cracking;
Great resistance to moisture and the appearance of fungus and microorganisms;
The presence of oils and resins released during heating;
It is possible to use a steam room without additional clapboard lining;
The ubiquity, which, together with the previous properties, makes the material the cheapest of options. Only pine is relatively price-competitive with aspen.

Flaws:

Most of the advantages of aspen coincide with the advantages of linden, the problem is that all of them are less pronounced than in the latter. In other words, the aspen is almost like a linden, but the main word here is “almost”.

Material for finishing the steam room

In addition to the already listed properties of each of the wood species, the following should be noted in relation to use in the steam room.

Linden

Advantages:

Linden has a very useful property for a steam room - even with strong heating, it is almost impossible to get burned with a coating of it. This is especially true for lovers of high temperatures;
The most pleasant smell of all types of wood.

Flaws:

Requires constant drying and regular care. The situation is facilitated by the fact that the process of replacing damaged lining boards is possible, which is more difficult to do for log cabins;
A change in the color of the material, which gradually occurs with constant use. It becomes noticeable as early as 4-5 years after finishing the bath;
Insufficient strength, quite naturally associated with the softness of linden wood.

Aspen

Advantages:

When used in a steam room, that is, under the influence of high temperatures, the beneficial effect of the resins and oils released by the base wood is most clearly manifested. They are especially useful in diseases of the respiratory tract, as they have anti-inflammatory qualities;
Does not darken and practically does not change color even with prolonged use.

Flaws:

slightly bitter smell, especially noticeable when heated.

Conclusion

It is almost impossible to determine the best material for a bath - each consumer can find exactly the one that will satisfy his specific requirements. As general recommendation we can say the following: for lovers of the classics and centuries-old traditions, linden is the most suitable, and if price-quality ratio is decisive, aspen is the best choice.

For those who complain about their weak immune system and cannot do without pills in cold weather, scientists have proposed a simple method - jump into a snowdrift or pond after a steam room. Therefore, if you have not yet acquired your own sauna, you can find out how to do it from rounded logs below in the article. Before you decide what your bath will be built from aspen or pine, and maybe from linden, it's time to find out the advantages and disadvantages of this choice.

Aspen - building material

Buildings made of aspen attract buyers with relative cheapness. The material is much more accessible than pine, and even more so cedar.

Maybe because hardwoods are valued less than conifers? What's the matter, what are the pros and cons of an aspen bath and will you later regret such a choice?

What disadvantages should be expected

Aspen was considered a weed tree for a long time. And now some experts do not like her.

probability of defects;
a very soft core, which, if it starts to rot, will infect the entire log.

Scratches and dents may remain on the fresh surface of the wood. But later it becomes almost “stone”, so it is almost impossible to process such an aspen. Dark spots are another effect that can be considered a disadvantage, as they visually age even a new building.

What are the advantages

Some disadvantages can be avoided if the selection process is taken seriously. For example, trunks with a damaged core will be received only by those who will be too lazy to check them for defects.

Tip: pre-treat the wood with an antiseptic to avoid stains.

Aspen has low thermal conductivity and low water absorption, in addition, it has long been noted that the material has bactericidal properties. For example, in such wells, water does not bloom even in extreme heat. For lovers of everything unusual, we can say that there is a belief that aspen can take away negative energy.

We start building

Suggested below general instruction which will help to understand the main stages of construction.

Column Foundation

There are several types of grounds for wooden bath, but the most promising is the foundation of the pillars. The price of such a foundation is much less than other options.

The main element of the pile (pillar), made of:

wood;
bricks;
concrete;
reinforced concrete;
asbestos pipes filled with concrete.

Poles can be installed with your own hands in the corners of the building, under the joints of walls and other places with a heavy load. The usual step between piles is 2 m, if it is larger, intermediate supports should be placed.

Most often, concrete blocks are used, under which a pillow is made of sand. From above, they must be closed with a waterproofing material, for example, roofing material in two layers.

Walls

Now it's time to build walls, and you can save on construction by buying a rounded log.

The initial cost will be offset by the lack of additional interior finishing.

Connection in the "bowl". Made on special machines the logs have a perfectly smooth surface, and the sawn bowls exactly match the radius of the logs. This gives a guarantee that the log house will be practically airtight, and an ideal microclimate is created in the room.

If you want to carve the bowls yourself, consider whether it's worth it. The price of the material will increase by only 20%, and you will have to spend more than one day and not the fact that you can beat the woodworking machine.

Warming. Each crown must be laid with a special linen-based jute fabric that is not afraid of moisture, rodents and insects do not eat it.

Log fastening. Attach the crowns to each other wooden dowels. Before this wood drill, holes are drilled in adjacent logs.

Windows and doors

You can start sawing them in a log house after laying half of the logs. However, do not rush, as some will have to be left in the form of binders for now. They will allow the walls during shrinkage not to lose their verticality.

roof construction

The final stage is the installation of the roof in the bath and its insulation. Its design depends on the size of the room, the type of foundation and the terrain, its shape can be varied.

Its role cannot be overestimated, it protects the bath from:

wind;
snow;
rain,

and also allows you to effectively save heat in the room.

Characteristics of linden logs

Before answering the question what better linden or aspen for a bath, you need to know the features of both materials. We talked about the latter above, now the turn of the linden has come.

What can be said about her:

it has a low density;
dry material is light in weight;
has low resinousness;
has low thermal conductivity;
soft in structure;
dries quickly;
has a light tone.
rarely cracks;
does not settle;
has a pleasant aroma, which, according to traditional medicine, can relieve tension and calm the nerves;
affordable price due to easy processing of the material.

Advantages of linden

In addition, the smell irritates rodents, which is why in Russia barns made of linden were considered the best, mice went there very rarely and the grain in them did not deteriorate.

Flaws

One should be singled out - the fragility of operation due to the soft structure. Because of this, the surface of the log becomes vulnerable to moisture, which inevitably leads to the formation of fungus. To increase the life of the log house, you will have to diligently look after it.

Tip: use linden for buildings that are needed for a short time or are located close to where you live so that it is not expensive to monitor them.

From the above, we can say the following, although linden baths in Russia have been built since time immemorial, but today there are better materials for such buildings.

And if you take a pine

Pine log cabins are noticeably superior in quality to aspen log cabins, but in some respects they are inferior to analogues made of elite cedar or larch (see also the article “Larch bathhouse - exquisite economy”). The material is optimally suited for people with average incomes. Before you understand which bath is better from aspen or pine, you need to know the characteristics of the latter.

What's Good About Pine Wood

The trunk of a pine is naturally flat and has relatively few small knots on it. This indicator is considered the most important advantage of the material.

The second advantage is environmental friendliness. The healing properties of the resinous coniferous smell have been known for a long time. It helps fight cardiovascular diseases, makes life easier for people who regularly endure stress.

Other natural characteristics:

wide coniferous has the best thermal insulation;
red is the most durable;
yellow is the densest;
white - universal, its price is cheaper than the rest.

Growing conditions also play a big role for pine wood. Northern breeds are valued higher, but only if they have not grown on marshy soils.

What causes complaints

During humid and hot seasons, pine logs may develop a slightly reddish or bluish tint, which somewhat reduces their aesthetic appeal. This is not rot and this fact does not affect the reliability of the design of the bath.
Get rid of this effect possible with the help protective compounds, which should be applied on the surface of the logs in time.
Pine is a resinous material, so it should be used carefully in the “hot” places of the bath, where, under the influence of temperature, the resin can cause skin burns. It can be pre-melted, but the cost of such material will be significantly higher.

Conclusion

The materials we have reviewed are various characteristics. Everyone can be used in one capacity or another for the construction of a bath, the main thing at the same time is to correctly understand their features so that the building stands as long as possible. In the presented video in this article you will find Additional information on this topic.

Which lining is better for a bath - an overview of materials for a bath, dressing room and shower

After erection on personal plot buildings for a bath, you need to decide on the option of interior decoration. And here a lot of questions arise. The interior design of the bath can be done using various materials. Whether it is the well-known lining made of various types of wood or more expensive material (for example, finishing or salt stone).

Of course, you should opt for lining. This natural and environmentally friendly material will be an excellent solution for the internal arrangement of the bath. The attractive design of the bath will please the eye of not only true connoisseurs, but also ordinary lovers of taking a steam bath. In order to understand which lining is better for a bath, you need to familiarize yourself with the characteristics and classification of the future lining.

As a rule, any bath consists of a waiting room, a steam room, and sometimes a shower room. For each of these premises there are a number of requirements for safety and environmental friendliness. So Decoration Materials should differ in their functionality, appearance and technical characteristics. But general rule is resistant to water, moisture and high temperatures.

Interior decoration baths is an aesthetic component. But the main criterion for choosing one or another wood flooring is safety. When heated, seats and walls should not leave burns on the human body. In addition, some types of wood (for example, softwood) emit characteristic resins that can be harmful to health. Prolonged exposure to a room with such a finish can cause allergic reactions.

Options for lining for a steam room

Clapboard lining is a popular way of wall cladding in a bath. The type of material used, the class and method of processing, determines main criterion how to choose lining for a bath. You should also choose suitable material for seats, shelves and additional decorative elements.

For installation work in the steam room, panels made of deciduous trees (alder, aspen, beech, ash, etc.) are used. This material has a flat and smooth surface without various kinds of damage. And the beneficial substances released under the influence of high temperatures have a beneficial effect on human health.

Depending on the density of the structure and the outer surface, the lining is divided into classes. Classes "Extra" and "A" have the highest quality ( smooth surface without damage or deformation). Classes "B" and "C" are somewhat lower in quality due to the presence of visible surface imperfections (knots, cracks). A separate subspecies includes eurolining. Due to a different way of processing wood, it is distinguished by a large thorn-groove connection and the ability to remove excess moisture through special grooves.

The choice of lining for the dressing room

The dressing room serves as a relaxation room in the bath. This room is not exposed to high temperatures. Therefore, a lining made of any type of wood can act as a material for wall cladding (read also: "How the dressing room is finished - stages of work and arrangement options"). Wall cladding with softwood panels (pine, spruce or fir) will fill the entire room with its unforgettable aroma. Aspen, linden and birch are also popular materials for wall decoration in the bath.

It should be remembered that it is best to use the same material to cover the ceiling and walls. And here is the application paintwork materials not best idea. To extend the life of the lining in the dressing room, special protective impregnations and varnishes are used.

Real gourmets of sauna rest recommend decorating the walls in the dressing room with pine clapboard. The special structure of the wood perfectly withstands high humidity, and the release of coniferous oils is minimized. An additional advantage is the low cost of the material.

The choice of lining for the steam room

The walls and ceiling of this room are lined with clapboard of the highest quality. It perfectly withstands high temperatures, high humidity, as well as constant exposure to water and steam.

Knowing specifications different types of trees, you can easily decide which lining to choose for the steam room. Undoubtedly, the best way- panels from deciduous trees, since conifers under the influence of high temperatures will release poisonous resins.

Production of lining from various breeds trees determined its characteristics and properties. Knowing all the advantages of wood material, it will not be difficult to answer the question of which lining is better in the steam room.

Linden

Excellent material that is durable and wear-resistant. High resistance to water prevents the appearance of small cracks and deformations during drying.

Linden panels have high thermal conductivity. Lining linden for a bath is able to evenly quickly distribute heat in the steam room, at the same time, reducing the cooling time of the walls. Low heat capacity will not allow you to leave burns on the human body in case of accidental contact with the surface.

Even at its low cost, the material has a dense structure and excellent characteristics. The pleasant aroma of wood is known for its relaxing and soothing effect on the human body. Linden lining will be an excellent option for the interior design of the steam room.

Aspen

As well as linden, aspen lining has a number of advantages. First of all, this material has a low traumatic ability (does not leave burns on the body), and also does not deteriorate after drying.

The great demand for aspen paneling contributed to the development and creation of a huge range of different shapes and sizes of finished panels (read: "Which aspen is best for a bath - planning a log house"). What is better for a steam room linden or aspen is a strictly individual question. Before buying, you must carefully check the surface for damage, chips and the presence of small knots. quality material determines the durability and visual appeal of the finished coating.

Alder

Alder lining for a bath is to the taste of more authoritarian lovers of bathing. This material is somewhat more expensive than the previous ones, and is of higher quality. The perfectly smooth surface has no defects, therefore, after installation, it does not require additional processing by a grinder.

Various options execution, technical characteristics of the material and the choice of colors directly depends on the financial viability and individual wishes. Alder for a bath is a great choice in favor of sophistication and functionality.

Cedar

Panels made of this material are used for decoration in more expensive and elite establishments. This material gained particular popularity due to its extraordinary beauty and special healing properties. Cedar wood does not require a special approach in the manufacture, processing and installation process.

Emitted by wood essential oils favorably affect respiratory system person (read also: "Essential oils for a bath - application, origin, rules of use"). Therefore, lining made of cedar for a bath is used not only for decoration, but also for therapeutic prophylaxis. Of course, over time, it becomes somewhat more difficult to catch a pleasant woody aroma, but delicious appearance cedar finish remains for a long time.

Larch

by the most best material for wall decoration in the bath, larch is rightfully considered. This material is distinguished by an unusual internal pattern, a strong structure, and due to the special composition of the wood, it has a high moisture resistance.

Larch for a bath has its drawbacks. This material is difficult to process - the risk of splitting and various damages is high. It also does not have special thermal insulation properties.

rare breeds

Clapboard "Extra" class has a high cost due to the quality of the wood used. Excellent technical performance, durability and beauty of materials distinguish it from other, cheaper options.

by the most exquisite material considered oak. Heavy panels installed from this material have a beautiful texture. There is also no need to talk about the durability of the material.

The use of the African Abashi tree is gaining in popularity. His unique property is the ability of wood not to heat up under the influence of high temperatures. Due to this, this material is more often used in the manufacture of shelves in the steam room. Options for finishing walls and ceilings are not excluded.

Panels made of pine family wood - Hemlock, brought from North America, are distinguished by high quality. The material is highly durable and durable.

Choice of lining for the shower

As a rule, it is customary to veneer all rooms in the bath with wood. The shower room is no exception. With high humidity and the constant presence of water, panels made from coniferous trees (for example, pine or spruce) will do just fine.

Improve properties, protect against rotting and extend service life floor covering can be applied with special water-repellent agents. To do this, the cleaned and polished surface of the skin is coated with protective wax or water-based paint. Sometimes several layers are applied for the best effect.

Waxing allows you to create an invisible barrier to water and air, as well as enhance the beauty of the natural grain of wood. The use of paints allows you to paint the surface in any color and shade (read: "How and with what to process the lining in the steam room - tips from practice").

Depending on the purpose, each room in the bath is finished with a certain material. The lining for a bath made of aspen or linden has characteristics that meet all safety requirements.

When calculating the cost finishing works it is necessary to take into account the costs for the purchase of cladding panels, materials for frame construction and fasteners, as well as antiseptics.

Which lining for a bath is better: a comparative review, features and reviews

Lining is called a thin narrow board, equipped with a special lock, usually working on the tenon-groove principle. The main advantages of this material are: ease of installation, environmental friendliness and aesthetic appearance. Initially, wagons were sheathed with such boards. passenger trains. Hence the name of this material. Lining can be used for facing buildings of various purposes. Very often this material is used, for example, for sheathing baths from the inside. In this case, it is very important to choose the right type of board. Further in the article, we will figure out which lining for a bath is better and how not to make a mistake when buying this material.

How can a board be classified?

When choosing a lining, first of all, pay attention to the following factors:

the type of wood used for the manufacture;

material class;

country of manufacture.

In any case, special requirements are imposed on the material intended for lining the bath, since it will subsequently be constantly exposed to moisture in combination with elevated temperatures.

Cedar and pine

Coniferous board for lining steam rooms from the inside is used extremely rarely. The best answer to the question of which wall paneling is better for a bath is this: hardwood. The fact is that a coniferous board contains just a huge amount of resin. Therefore, when heated, hard-to-remove, quickly hardening “tears” appear on its surface. In addition, such material begins to emit a very strong smell. However, despite all this, some conifers can still be used for lining steam rooms. These include, for example:

Canadian or Altai cedar. This wood for baths is allowed to be used primarily because it contains very few resins. Even with strong heating, these viscous substances do not have a special effect on the microclimate in the steam room.

Pine. This type of wood can only be used in steam rooms with electric heaters. The fact is that such equipment warms the air in the room not too much. Such a temperature at which pine resin begins to melt never occurs in baths of this type. The wood of this breed is heated at elevated temperatures not too much. At the same time, she looks quite beautiful. When using a wood-burning or gas stove, pine is allowed to finish only dressing rooms.

Alder, linden, aspen: which is better?

Hardwood lining for a bath is better than coniferous. In principle, almost any such board is suitable for sheathing a steam room. You can use for this purpose even, for example, an inexpensive birch. However, if you are interested in the answer to the question of which lining for a bath is better from hardwood, then these are:

A board made from such wood is distinguished by simply wonderful operational characteristics looks nice and lasts a very long time. These varieties of material cost more than birch, but a bath with their use is much more comfortable and convenient for people taking water procedures.

As you can see, there are different lining for the bath. Which is better? Prices, for example, for alder boards from most suppliers are not too high. This is a very good option. At the same time, such a board is not at all afraid of prolonged exposure to moisture and practically does not heat up in the steam room. However, at elevated temperatures, alder begins to emit a slightly bitter smell into the air (in principle, not too unpleasant).

Linden lining is more expensive than alder, but it can also last much longer. In addition to good resistance to moisture, such a board also has the advantage that it is never damaged by wood bugs. Burn yourself on such boards while taking water procedures, since they don't get hot, it's impossible. It is believed that it is linden lining for facing baths that is best suited.

Aspen, like alder, can emit a bitter characteristic odor into the air. Such boards usually serve for a very long time. But only if they are not damaged in any way during operation. Around any scratch or chip on the aspen board, a rotted area can quite quickly form.

Which clapboard is better to sheathe a bath: an African novelty

Recently, many wealthy bathhouse owners prefer to trim the steam rooms with abash wood boards. This material looks great on the walls and ceiling. Abash tree grows in Africa. Its main advantage is the ability to remain pleasantly warm even at very high air temperatures in the steam room. Abash lining does not heat up, including in places located in the immediate vicinity of the heater. The color of the board of this variety has a pleasant beige.

Which lining is better for a bath: a comparative review of the material by class

The lining produced by modern industry, among other things, can also differ by class. On this basis, there are mainly three classes of board on the market: A, B and C. For steam rooms, only lining marked with the letter A is usually purchased. Such material, according to standards, has practically no damage and contains a very small number of knots. In extreme cases, you can also purchase a lower-quality cheap lining B for the steam room. The material marked with the letter C is completely unsuitable for wet rooms.

Very often, lining of the class "Elite" or "Premium" is also used for baths. Such material looks very solid and neat and lasts a long time. However, this type of board is quite expensive.

Comparison of domestic material and imported

Next, let's figure out which lining is better to use for a bath - domestic production or imported. On the Russian market today there is a board of both varieties. At the same time, domestic lining is the most popular among the owners of baths in our country. quality Russian material differs quite worthy. It costs much less than imported ones.

Eurolining for lining baths, of course, can also be used. From domestic imported material differs mainly only in more accurate compliance with standards. All foreign-made boards are carefully sized. Domestic lining in some cases may have a slightly inappropriate width declared by the manufacturer. In addition, foreign-made boards are distinguished by a deeper lock groove.

Choice by appearance

When deciding which lining for a bath is better, among other things, you should pay attention to how this material looks. Previously, only one type of cladding of this type was sold in building supermarkets - a flat board. Today, if desired, for finishing the bath, you can also buy a special lining - a block house. This is the name of the board, which in appearance resembles a very even narrow slab. Mounted on the wall, such material imitates a log in an unusually realistic way.

In addition to the usual material and block house, in our time there is also an American board for sale. This option is also a good answer to the question of which clapboard is better to sheathe the bath from the inside. A board of this kind on the wall imitates a beam. The American lining looks very beautiful. However, it should only be used for facing baths of a very large area. The fact is that this material has a significant thickness.

Lining processing

Such a board comes to the market already completely ready for installation. However, since the microclimate for wood in the bath is not very favorable, it is advisable to process the lining before installation. Most often, for this purpose, it is used that does not emit into the air harmful substances cheap olive oil. However, unfortunately, this finish is not very durable. Therefore, when deciding which means is better to process the lining in the bath, many owners of suburban areas choose a special oil. This material also does not emit harmful substances into the air and lasts much longer than drying oil. But at the same time, oil is, of course, a little more expensive.

lining cost

Of course, one of the main factors that influences the choice of board type is the price. The cost of lining depends primarily on its thickness and width, as well as the type of wood and quality class. For example, the price of a lime board 14 x 96 x 1000 mm "Extra" is approximately 550 rubles. Alder lining grade A 14 x 80 x 2700 mm costs about 250-270 rubles. For aspen material 12.5 x 42 x 500 mm class B, you will have to pay 100-120 rubles. Cedar eurolining of the "Extra" variety 14 x 85 x 2500 mm costs about 1500 rubles. The price of an abash block house 16 x 85 x 3000 mm is about 1200-1300 rubles. Prices are for 1 square meter material.

After erecting a building for a bathhouse on a personal plot, it is necessary to decide on the option of interior decoration. And here a lot of questions arise. The interior design of the bath can be done using various materials. Whether it is the well-known lining made of various types of wood or more expensive material (for example, finishing or salt stone).

As a rule, any bath consists of a waiting room, a steam room, and sometimes a shower room. For each of these premises there are a number of requirements for safety and environmental friendliness. Therefore, finishing materials must differ in their functionality, appearance and technical characteristics. But the general rule is resistance to water, moisture and high temperatures.

The interior decoration of the bath is an aesthetic component. But the main criterion for choosing one or another wooden coating is safety. When heated, seats and walls should not leave burns on the human body. In addition, some types of wood (for example, softwood) emit characteristic resins that can be harmful to health. Prolonged exposure to a room with such a finish can cause allergic reactions.

Options for lining for a steam room

Clapboard lining is a popular way of wall cladding in a bath. The type of material used, the class and method of processing, determines the main criterion for choosing a lining for a bath. You should also choose the right material for the seats, shelves and additional decorative elements.

Depending on the density of the structure and the outer surface, the lining is divided into classes. Classes "Extra" and "A" are of the highest quality (smooth surface without damage and deformation). Classes "B" and "C" are somewhat lower in quality due to the presence of visible surface imperfections (knots, cracks). A separate subspecies includes eurolining. Due to a different way of processing wood, it is distinguished by a large thorn-groove connection and the ability to remove excess moisture through special grooves.

The choice of lining for the dressing room

The dressing room serves as a relaxation room in the bath. This room is not exposed to high temperatures. Therefore, lining from any type of wood can act as a material for wall cladding (read also: ""). Wall cladding with softwood panels (pine, spruce or fir) will fill the entire room with its unforgettable aroma. Aspen, linden and birch are also popular materials for wall decoration in the bath.

It should be remembered that it is best to use the same material to cover the ceiling and walls. But the use of paints and varnishes is not the best idea. To extend the life of the lining in the dressing room, special protective impregnations and varnishes are used.

Real gourmets of sauna rest recommend decorating the walls in the dressing room with pine clapboard. The special structure of wood perfectly withstands high humidity, and the release of coniferous oils is minimized. An additional advantage is the low cost of the material.

The choice of lining for the steam room

The walls and ceiling of this room are lined with clapboard of the highest quality. It perfectly withstands high temperatures, high humidity, as well as constant exposure to water and steam. In order for the lining of the bath with a clapboard inside to be successful, you need to take care of the quality of the material in advance.

Knowing the technical characteristics of different types of trees, you can easily decide which lining to choose for the steam room. Of course, the best option is panels from deciduous trees, since conifers under the influence of high temperatures will release poisonous resins.

The manufacture of lining from various tree species determined its characteristics and properties. Knowing all the advantages of wood material, it will not be difficult to answer the question of which lining is better in the steam room.

Linden

Excellent material that is durable and wear-resistant. High resistance to water prevents the appearance of small cracks and deformations during drying.

Even at its low cost, the material has a dense structure and excellent characteristics. The pleasant aroma of wood is known for its relaxing and soothing effect on the human body. Linden lining will be an excellent option for the interior design of the steam room.

Aspen

As well as linden, aspen lining has a number of advantages. First of all, this material has a low traumatic ability (does not leave burns on the body), and also does not deteriorate after drying.

The great demand for aspen paneling has contributed to the development and creation of a huge range of different shapes and sizes of finished panels (read: ""). What is better for a steam room linden or aspen is a strictly individual question. Before buying, you must carefully check the surface for damage, chips and the presence of small knots. High-quality material determines the durability and visual appeal of the finished coating.

Alder

Various versions, technical characteristics of the material and the choice of colors directly depend on the financial solvency and individual wishes. Alder for a bath is a great choice in favor of sophistication and functionality.

Cedar

Essential oils released by wood have a beneficial effect on the human respiratory system (read also: ""). Therefore, lining made of cedar for a bath is used not only for decoration, but also for therapeutic prophylaxis. Of course, over time, it becomes a little more difficult to catch a pleasant woody aroma, but the delightful appearance of the cedar finish remains for a long time.

Larch

Larch is rightfully considered the best material for wall decoration in a bath. This material is distinguished by an unusual internal pattern, a strong structure, and due to the special composition of the wood, it has a high moisture resistance.

Larch for a bath has its drawbacks. This material is difficult to process - the risk of splitting and various damages is high. It also does not have special thermal insulation properties.

rare breeds

Clapboard "Extra" class has a high cost due to the quality of the wood used. Excellent technical performance, durability and beauty of materials distinguish it from other, cheaper options.

Oak is considered the most refined material. Heavy panels installed from this material have a beautiful texture. There is also no need to talk about the durability of the material.

The use of the African tree Abash is gaining in popularity. Its unique property is the ability of wood not to heat up under the influence of high temperatures. Due to this, this material is more often used in the manufacture of shelves in the steam room. Options for finishing walls and ceilings are not excluded.

Panels made of pine family wood - Hemlock, brought from North America, are distinguished by high quality. The material is highly durable and durable.

Choice of lining for the shower

To improve the properties, protect against decay and extend the life of the floor covering, you can apply special water-repellent agents. To do this, the cleaned and polished surface of the skin is coated with protective wax or water-based paint. Sometimes several layers are applied for the best effect.

Depending on the purpose, each room in the bath is finished with a certain material. The lining for a bath made of aspen or linden has characteristics that meet all safety requirements.

When calculating the cost of finishing work, it is necessary to take into account the costs for the purchase of facing panels, materials for the frame structure and fasteners, as well as antiseptics.

What material can be used for the steam room so that the high temperature does not affect the quality and appearance of the board? Having been working in the field of construction and wood finishing for a long time, we know how this or that type of wood behaves in operation, which material will be environmentally friendly and most durable.

So, finishing the bath with a clapboard, which option from the following is suitable for the interior cladding of a room with a high temperature?

An important condition for lining the bath with clapboard is the absence of resins, the ability of the material to withstand both sudden changes in temperature and high humidity. And of course, the natural beauty of the panels is very important here - texture and high performance.

Photo 1. Linden steam room

Photo 2. Arrangement of the shelf

Aspen

Very beautiful in its texture, has in its composition few pitches, due to which it practically does not heat up.

The disadvantage of this material is that aspen quickly loses its natural beauty. and begins to look dirty gray, its service life is not short, but, unfortunately, its appearance, after a couple of years, will force you to sheathe the room with another clapboard for the steam room.

Photo 3. Aspen wood bath

Photo 4. Health cabinet

Photo 5. Harvia oven

Linden

Facing with lime eurolining for a bath is a pleasant and rewarding job. From time immemorial, the properties of this wonderful material have been known - low thermal conductivity (due to the absence of resins), light, healing aroma (lasts for the first six months), beautiful, white lime color. The choice of such lining for your bath is an excellent option.

By the way, very frequently asked question Which is lighter in weight linden or cedar?

Linden lining weighs less than cedar, but not by much. If a cube of linden weighs 400 kg, then a cube of cedar weighs 420 kg.

Photo 6. Sauna from linden grade "Extra"

Photo 7

Photo 8

Of the minuses can be emphasized high cost high grade "EXTRA" (in grade "A" and "B" - this tree does not look beautiful due to frequent black knots) and the fact that it is almost impossible to find a calm profile in the market, and eurolining has gone out of fashion, although it has more high performance properties.

Cedar

Cedar lining for a steam room is perhaps the most attractive option for every zealous owner. Who has not heard about the miraculous properties of this Siberian giant? Its wonderful aroma (when lining the steam room, the smell will open with each kindling), its healing phytoncides, which, getting into the air from the heat of the stove, will penetrate into every cell of the body, providing a medical effect, increasing your immunity and mood.

Yes, the cedar bath is an invention of strong, healthy inhabitants of Siberia, for the inhabitant of the metropolis it will be a source of health and longevity.

Photo 9

Photo 10. Clapboard made of cedar on the ceiling of the sauna

Photo 11

Of the minuses cedar lining for the sauna can be noted only one - the knotty of the board. Unfortunately, nature decreed that the fragrant oleoresin of the cedar is located precisely in the area of the knot and high-grade panels have practically no smell, although they retain other properties: they do not heat up, they do not grind, such lining lasts a long time in the bath, eventually acquiring reddish hues and an interesting contrast between hard and soft wood layers.

Do I need to cover the panels in the sauna and relaxation room with oil wax?

I also want to tell you: no matter what clapboard you choose to sheathe your steam room necessarily need to process it special means . This is done not only so that it lasts longer, but also so that the green spray from the broom is easily washed off the walls and shelves with a simple rag or sponge. Admit it, it’s not very pleasant to invite guests to a sloppy spattered bathhouse.

An important indicator of the quality of such a product is the absence of oils.. It is better if you use pure wax (for example, Hartwatches from GNature), because the oil not only yellows the wood, but also penetrating into the upper layers, it deprives the surface of the properties of low thermal conductivity.

Photo 12. GNature sauna wax

Online store "LesoBirzha" implements eco-friendly materials for a bath, including wall paneling and waxes, you will also find lining for a rest room, shower room, home, balcony and other premises, as well as get competent advice from our specialists.

Tell me which lining to choose Linden or Alder? The owners of Alder, tell me how the lining smells, how does it behave?
Don’t know how about alder, but it’s much easier to steam in a linden bath, steamed in a bath from linden round timber, and pine sheathed with linden. I state the fact of softness of soaring and lightness of steam. Linden has been used for a long time, but somehow it was not necessary to deal with alder. Linden darkens over time, that is, it changes its original appearance. Take the highest grade linden and take a steam bath on your health.
The forum has already said, talked about the lining and lining of steam rooms and KO a lot, look for yourself and you will find a bunch of everything useful on your issue. But in essence, I personally have everything sheathed with a linden board like a block house, there are no questions, the aroma is pleasant, the steam is soft, in general, full of Feng Shui ...
alder just has a beautiful color
Beautiful, pink, but darkens over time, however, like any tree in the steam room. I have combined: ceiling - aspen, walls - alder, shelves - linden.
Do not chase beauty all this for a maximum of a year, in the steam room and the temperature and from the brooms a lot of garbage flies. Read about the properties of trees, google and accept what is closer and more to your liking.
The stability and density of the aroma from the wood in the bath is directly dependent on the thickness and quality of the material that will sheathe the room, plus the intensity and frequency of the bath ducts. If the lining is thin, vtyukhana by a cunning manager or a consultant in the market, and even glued - made from waste - then the aroma from it will be appropriate. Don't be standard, don't make the steam room big wooden box, that is, everything in a wagon ruler, sheathed with a blockhouse, a slab or an overlapping polished board, you will not regret it. This is my personal opinion and belief, and you choose. And in terms of beauty, so every tree, if it is processed with high quality, is very beautiful in its own way, a fact ...
The stability and density of the aroma from the wood in the bath is directly dependent on the thickness and quality of the material that will sheathe the room, plus the intensity and frequency of the bath ducts. If the lining is thin, vtyukhana by a cunning manager or a consultant in the market, and even glued - made from waste - then the aroma from it will be appropriate. Don’t be standard, don’t make a big wooden box out of the steam room, that is, everything in a wagon ruler, sheathed with a blockhouse, slab or overlapping polished board, you won’t regret it. This is my personal opinion and belief, and you choose. And in terms of beauty, so every tree, if it is processed with high quality, is very beautiful in its own way, a fact ...
Click to reveal...

I think so guys. I don’t want to offend anyone, but ... If everyone is blindfolded and let into the steam room, then let someone tell a fairy tale about the pleasantness and lightness of steam and let them determine what the steam room is sheathed with. One in a hundred will be able to tell. In most cases, everything rests on suggestion and emotions. The situation (ambiance or aura or mood) depends on the smells that the walls absorb from brooms, infusions, sheets. smelly bodies, sweat dripping on shelves, creams from women's bodies, and all sorts of other smells. secretions, etc.
natural oils and tree juices will still run out and quickly enough. the freshness of the bath is the greater the fewer films between the log house and the atmosphere of the steam room. It is the solid wood that breathes! but not with air, but with moisture! Solid wood softens the steam and sensations. a bare log house is a real idyll for a steam room.
It is more important not to linden on the wall or alder on the ceiling - it is IMPORTANT that sweat does not drip on the shelves and floor in the steam room. Use bedding in the truest sense of the word! :o
Otherwise, any ideal "furniture" will stink and not smell, sorry. here we are rescued by oils and infusions, zaparkas
Try using a combination of alder and linden. They have different colors - they will turn out beautifully. Let's say the main color is lighter, and with the help of dark to make accents on certain objects.
IMHO, the material for a shelf, a lounger in a bath should be inexpensive, practical.
Since during bathing procedures sweat (no matter how hard we try) still gets on the shelves and absorbs the smell of sweat. Appears over time bad smell and here it doesn’t matter anymore from linden or alder the walls and ceiling are made.
Just change the flooring of the shelf from time to time. To do this, it must be done in such a way that when replacing it would not have to disassemble the entire steam room.