How to make a glass floor - installation instructions. Glass floor - exquisite design for your home Materials and tools

As part of the cover

The replacement of traditional modern flooring with glass has been gradual. At first, these were small decorative glass niches with and without filling, which gradually increased, transformed into glass ribbons, fields, and finally, glass floors. Such glass elements as bridges became an additional decoration for the floors.

Thus, the glass floor can be divided by appearance, and, therefore, by design into the following types.

glass floor throughout the room. This expensive and unusual design will decorate any room in residential buildings(rooms, kitchens, hallways, baths), as well as public, commercial and public institutions. Inside, the floor can be decorated in any style in accordance with the interior of the room. Such custom solution will definitely cause surprise, and make a splash. Glass floors can be organized as part of a single glass ceiling (top is the floor, bottom is).

glass field is a section of the floor, consisting of solid glass without joints, which covers most of the surface.

glass niche- original design technique. The design is a niche in the floor, covered with glass plates. Filling a niche is a creative process and involves a lot of decisions. Decorative compositions and installations in a niche can be on a marine theme, floral, archaeological, landscape, etc.

glass tape(tape glass floor) can be laid out around the perimeter, for example, limiting the pool bowl or in the form of glass paths that delimit the space into zones. Often, in order to highlight a certain area, glass ribbons are supplied, for example, in expensive boutiques, to indicate racks with clothes. Making the room with glass ribbons visually enlarges the room, which is especially important for small areas.

floor podium- glass pedestal. In combination with the original lighting design, outdoor scenes are very popular in the design of bars, restaurants, nightclubs and other entertainment venues. From public spaces, this design is gradually moving into residential buildings.

Aquarium in the floor. A very expensive pleasure. A glass aquarium with live fish is located in the floor, which can be either glass or wood.

Glass floors and glass floor elements give the whole room transparency, visually expand the boundaries, and can also serve as a showcase, billboard (with appropriate internal filling) and be additional source Sveta. But first of all, they must be very durable and safe.

Glass window in the floor

The load on the glass floor must be at least 400 kg. per 1 sq.m. Therefore, heavy-duty glass is used for glass flooring. The number of triplex layers (not less than three) depends on the degree of load, which are fastened with a polymer film or resin by means of heat treatment. by the most important element the glass floor is the base. It can be different - concrete, wood, metal. With help metal profile from high-strength structural steel or stainless steel frame is mounted. A sealant is laid along the profile of the frame, treated with a sealant, and then glass panels are laid, on which the sealant is again placed, and decorative strips on top. The joints between the glass sheets are also treated with sealant, and the entire structure is additionally fixed with steel bolts.

The installation of a glass floor can be done with point fixing systems that make the flooring more elegant. Unlike the frame, they are less massive and also have mechanisms to compensate for dynamic loads. This type of fastening allows you to create perfectly smooth glass surfaces even on uneven floors. Using the point fixing system, it is possible to mount glass panels of different thicknesses, both in simple holes and countersunk.

The disadvantages of glass floors include their high cost, the appearance of scratches during operation and a smooth sliding surface. The last two problems can be eliminated if the glass is sandblasted or silk-screened. After the glass is installed with the rough side up and it will be more difficult to slip. Screen printing is a glass processing method in which the top glass plate is coated with a special enamel and then baked in a furnace at a high temperature. This treatment of the glass surface allows to increase the level of wear resistance and resist slipping.

It is easy to maintain cleanliness in a room with glass floors - they are not afraid of moisture, various household environments and are easy to clean.

Glass floor today can be found not only in expensive restaurants, nightclubs or shopping malls but also in private houses or cottages. These are very beautiful designs that contribute to the free distribution of lighting throughout the room, giving it more volume and individuality.

It can be used to cover both the entire room and individual fragments of the floor. The glass floor is made of multi-layered transparent or tinted triplex or tempered laminated glass coated with a polymer layer.

Material Features

Triplex - a special glass, which consists of several layers fastened together different types films. Its thickness can be up to 4 cm. This material is distinguished by high resistance to stress and abrasion, resistance to chemicals.

To ensure the strength of the floor, its upper part is made of When choosing a material, you should pay attention to its quality, which depends on the fixing film. It comes in several types.

The glass floor, made of triplex with ethylene vinyl acetate film, has low quality. At high humidity and low temperatures, it delaminates, which affects the strength of the glass. You can distinguish such a triplex in appearance - it has a matte color.

The material glued with polyvinyl butyral film has the best properties. Such glass is intended for laying on large areas. The most expensive and high-quality - triplex, glued with a film of thermoplastic polyurethane. Glass floor for safety reasons must have a margin of safety.

glass floor construction

The base for the glass floor is made of metal, wood or reinforced concrete. It must be smooth and solid. For a hole is made in the base through which the wires are led to the distributor.

The floor structure is a glass niche, which has various forms and sizes. Inside it may be decorative elements(pebbles, sand, plants, corals, etc.). The structural elements of such floors are: glass panels and lighting. Power structure made of steel serves as a support for glass plates. A metal frame is mounted around the perimeter of the niche with the help of which it must be securely fixed, since the quality and service life of the flooring depend on this. To ensure a tight fit of the glass panels, a sealing rubber or silicone tape is placed between the frame and the profiles.

Glass plates are frosted, transparent or colored. They may be in two parts. The first is made of triplex, the second is made of tempered glass. The glass floor arranged in this way allows the replacement of the damaged upper part of the floor covering.

Types of glass floors

The floor glass has many versions, each type gives to the room the refined and unique look.

1. Tape floors. They are installed in paths along the walls, which visually increases the space of the room. It becomes lighter and more spacious. Under glass, you can create various drawings, pictures that emphasize the originality of the coating.
2. The floor is in the form of a niche. Mounted on a frame and usually has small size. Inside the opening, you can make a composition from any materials and supplement it with lighting.
3. Colored mosaic. Such flooring is used in bathrooms, and together with lighting, the glass floor creates a romantic atmosphere.
4. maybe glass covering a large area. Such a floor must certainly have an installed backlight. Due to the properties of the translucency of the material, a unique, unique design of the room is obtained.

Glass floor lighting

Glass floors with illuminated steel fashion trend in the implementation of design ideas. A variety of color palettes and transfusion of many shades contribute to their unusual beauty. You should be aware that not all light bulbs are suitable for backlighting. Neon lights are used as the light source. led strip. Do not use which will strongly heat the glass. Properly executed lighting emphasizes the uniqueness and transparency of the glass structure.

Advantages of glass floors

Glass floors, photo various kinds which are presented in the article, create an indescribable atmosphere of unusualness, overflow of colors and shades.

In addition, they have a number of advantages:

• withstand loads up to 400 kg;
• safe, shockproof;
• abrasion resistant, aggressive environment, temperature differences;
• possess high level sound insulation;
• durable;
• waterproof.

Hide

Today, it is not difficult to make a glass floor on your own. But at the same time, it is necessary to take into account all the subtleties of installing a glass floor in order to properly mount the glass floor.

The most popular option for glass flooring is the so-called. "window in the floor" In addition, the price of such a floor allows you to install it in your apartment or at home on your own. How to make a glass floor with your own hands - you will learn from this article.

Do-it-yourself glass floor installation

Laying the floor glass covering consists of 7 steps. Let's consider each of them:

Stage I - Material selection

Glass floor installation

As a rule, the floor is equipped with triplex - heavy-duty glass, which can withstand up to 400 kg per 1 sq. m. In another way, this glass is also called a three-layer "pie", because it consists of 3 layers, the thickness of each of them is at least 8 mm. And the connection of these layers occurs by means of a polymer film or as a result of pressing by heating.

However, laminated tempered glass coated with a polymer layer can also be used.

In addition to glass panels, to make a glass floor, you will need profiles:

For the design of the floor space you will need finishing material: laminate, wood or ceramic tiles. When using the latter material, you will need a grinder.

What other set of materials and tools will be needed, see the article on our website.

Stage II - Determining the type of foundation

Diagram of a glass floor device

The base is the main element of the entire glass floor structure, since it is it that is responsible for the strength of the coating.

The base for the glass floor can be reinforced concrete, steel, and wood. But, no matter on what basis you stop, it is important not to forget that the base floor niche must be solid and absolutely even.

Important! Experts recommend preparing the base for the future glass floor before the final installation of the glass floor covering.

Glass niche-floor

In addition, determine what exactly the floor will be - a glass niche or a glass podium.

If you decide to install a glass floor with your own hands in the form of a niche, then make a recess in the floor 15 cm deep. If the glass podium, raise the structure 20 cm from the floor level.

You can choose any geometric shape of the base that you like. However, if for the first time you decide to make a glass floor yourself, experts recommend making a recess in the shape of a square or rectangle to avoid maximum errors.

Stage III - Arrangement of a metal frame

The recess for the future glass floor is ready. Now place a metal frame around the entire perimeter of the niche.

Important! The frame must be made of stainless or high-strength structural steel

metal frame glass floor

The fastening must be very reliable, since the glass can also be thick - 25 mm, and one glass panel weighs about 150 kg.

In general, the dimensions and thickness of the metal frame should be absolutely similar to the dimensions of the base under the glass floor. And also the frame itself must be below the floor level exactly along the thickness of the glass and sealant.

Connect the parts of the metal profile with self-tapping screws, and attach bolts to the base.

If you want to make a glass floor with your own hands with lighting, then be sure to make a strobe at the base of the floor niche for the wires to exit. After - fix the LED backlight. Or if you are using not a backlight, but an LED strip, then attach it from below to the protruding part of the frame with double-sided tape. For more information on choosing floor lighting, see below (stage VI).

Stage IV - Tiling the base

Finishing with ceramic tiles of the base

To make the tiling, use the adhesive mixture. To do this, apply it with a spatula on the base of the floor and the reverse side of the glass in a thin layer. And in order for the tile to have required dimensions- go over it with a grinder.

Treat all the scars with a grout mixture, and remove the excess with a spatula.

Do not touch the finished base for about 2-3 days so that it dries completely.

Clean the tile with a small piece of cloth and use it to remove excess glue, grout, dust and other construction debris.

Stage V - Glass floor decor

Decorating the base under the glass floor

Decorating the base is a creative stage when installing a glass floor, because here a wide variety of materials can be used as decor. For example, shells, coins, small pebbles, flower petals, beads, sand, sparkles, dried flowers, etc.

This stage is at the same time the easiest - just beautifully lay out the decor you like inside the glass podium or niche.

In addition, if you have a talent, and just a desire, you can apply any drawing or image ceramic paint using a stencil.

You can also tint the glass floor under a mirror or arrange a floor covering with a frost effect. And if you also use a special film that fits between the glass sheets, then your floor can be of any color scheme.

Stage VI - Installation of glass floor lighting

Decorated glass floor

Lighting is also an important part when installing a glass floor. After all, it is impossible to imagine a floor glass covering without filling it with light.

It is important to know here that not all light bulbs are appropriate for lighting. For example, never use halogen lamps, as they can heat up the glass very much. It is better to use neon tubes, fluorescent bulbs, a luminous cord and spotlights as a light source. LED lights.

Before choosing one or another backlight option, decide on its location. Although in recent times it is customary to place lamps arbitrarily: you can select specific elements of decor or around the entire perimeter.

Illuminated glass floor

Note that among all the lighting options, the most popular of the neon lamps. And it is no coincidence, because neon light is always even, soft, without obvious shadows. In addition, the use of this type of illumination allows you to give the glass floor a different geometric shape, since neon tubes can also be attached to hard-to-reach corners of the floor.

Thanks to modern technologies, you can automatically turn on the backlight at nightfall when using a special electronic device, as well as change its color palette and intensity. Or you can even create "light music" for the appropriate atmosphere - from romance to street dance.

Stage VII - Fixing glass panels

Romantic glass floor

The final stage includes the direct installation of a glass floor with your own hands.

Note that we must not forget about such a sub-stage as the treatment of a concrete floor with liquid glass. It follows after the installation of the backlight. This processing is only a sub-step and is not always applied.

Use the same liquid glass for floor screed. For this:

• Apply a thin layer (at least 3 mm) of liquid glass to the concrete floor,
• Lay out the phlox
• Pour in another layer of liquid mixture.

Important! Liquid glass must be used within 1 hour

Floor treatment with liquid glass

Leave to dry for 1-2 days, and then varnish.

Floor with screed liquid glass will have a beautiful and unique interior.

Install the glass panels on the seal that is attached to the frame.

For the reliability of the glass panels on the frame, apply on them reverse side the thinnest layer of sealant.

Glass floor installation

Fix the structure using steel bolts.

Treat the seams between the glass panels with sealant.

Attach the decorative profile. To do this: lay it on the seal so that the finishing frame does not come into contact with the glass surface.

You can see the general progress of work on installing a glass floor in an article on our website.

The glass floor today is an exquisite design element, in recent years more and more people decide to make their floor just like that. Glass floors recreate games of unusual colors and shadows, and general impression is enhanced if you arrange a backlight in such a coating. Let's talk with you today how to make a glass floor at home.

Glass floor features

If you want to give your interior originality, then you should pay attention to glass floors. Even replacing a small part of an ordinary floor with glass can drastically change it. appearance and lighten the atmosphere in the room, especially if it has a lot of dimensional furniture. Along with this, the volume of the room also increases. In addition, the glass floor is also distinguished by hygienic properties, because bacteria practically do not live on it.

There are several types of glass floors. The main ones are:

1. Large glass floor throughout the room. This is a very bold and expensive floor design decision. A similar option can be arranged in almost any room - bathroom, hallway, hall or kitchen. Inside, the floor is filled with any decor that is in harmony with the overall interior design of the room.
2. glass ribbons. Such tapes are located along the perimeter of the walls on the floor. One of the advantages of such a floor is the ability to delimit space into functional areas, for example, in the living room or around the pool. They are created, for example, to illuminate mannequins and clothes racks in expensive boutiques, and in residential areas they are part of a decorative lighting system. The design of the floor with illuminated glass ribbons visually expands the room, especially if it is small.
3. glass niches. Such a design is a recess of a certain shape, which is made on the floor surface, filled with decorative elements and then covered with glass plates. Glass floor windows will add originality to any room, as they allow you to create a floral arrangement of dried plants, rose petals and sparkles inside the structure, a real exhibition of souvenirs, coins or minerals, recreate a dry aquarium or a piece of beach from sea pebbles or sand.
4. Aquarium in the floor. However, the cost of a glass floor with a live aquarium and floating fish rolls over! A popular solution is the combination of glass flooring and wooden flooring.
5. glass ceilings - decorative bridges and stairs. This direction is quite popular in the design of multi-storey buildings today.
6. Glass floor podium. In entertainment centers and residential buildings, it has long been customary to equip the glass floor in the form of an elevation. This design is located above the usual floor by about 150 millimeters.

DIY glass floor

It is safe to say that the most popular type of glass floor is considered to be a “window in the floor”. In addition, the price of a glass floor allows you to equip it at home with your own hands.

1. Choose a material

For starters, you should take care of the glass panels. The floor covering is equipped with heavy-duty glass, which is able to withstand the load, which is close to 400 kilograms per square meter. For such purposes, triplex is best suited - the so-called three-layer "pie", the thickness of each layer in it is at least 8 millimeters. The layers are connected using a polymer film or by heating pressing.

In addition, tempered laminated glass can be used, which is coated with a polymer layer, which contains hollow glass microspheres. Due to the spherical shape of such particles, the consumption of polymer consumption is reduced. Since laminated glass is not cut and there is no on-site adjustment of the material, it is very important when creating a glass floor to take measurements of the area as accurately as possible.

In addition to the glass panel, to make a glass floor, you need to prepare other expendable materials- a metal profile for mounting the frame and a decorative profile for the design of joints between adjacent floor coverings. At the same time, try to choose a profile that is able to close the glass attachment points and the LED strip attachment points.

To design a niche space, you also need to choose a finishing material. You can give preference to laminate, wood or ceramic tiles. Immediately you need to worry about the method of fastening interior decoration. For example, if you have chosen a tile, then you should buy grout for joints and ready-made glue. You will also need silicone sealant and sealing elements, a screwdriver and a grinder, self-tapping screws and bolts, spatulas (rubber and notched) and a grinder.

2. Determine the type of base

The main element of the entire structure of the glass floor is the base, which is responsible for the reliability of the coating. The base for the floor can be reinforced concrete, steel or wood. But in any case, do not forget that the base surface must be flat and durable. It is advisable to carry out work on the preparation of the base before the final installation of the floor covering.

First of all, you should decide what kind of floor you will make - a glass podium or a glass niche, as in the photo of glass floors. In the first case, the base will have to be raised 20 centimeters from the floor level, in the second case, a recess in the floor should be made at a distance of 15 centimeters. You can equip the base of any geometric shape. However, if this is your first time doing such work, it is recommended to make the hole square or rectangular shape to make fewer mistakes.

3. We equip the metal frame

After the recess is made, it is necessary to place a metal frame around the perimeter of the glass window, which is usually made of high-strength structural or stainless steel. Anchor bolts that are used in the construction are made of steel and are coated on top with a special anti-corrosion coating, with pull-out reinforcement.

Fasteners must be very reliable, as the thickness of the glass can be up to 25 millimeters, and one glass panel can weigh close to 150 kilograms. The dimensions and shape of the frame must match completely with the dimensions of the base under the glass floor. It should be located below the floor level by an amount equal to the thickness of the seal and glass.

Pieces of a metal profile are connected with self-tapping screws, and bolted to the base. An important condition is that the metal frame must be securely installed on the base in order to avoid possible deformations of the glass floor.

If you plan to equip the floor with lighting, then do not forget to make a strobe at the base of the floor for the output of wires that go from the backlight to the nearest distributor or switch. Then fix the backlight. If you are using an LED strip, you can simply stick it on the bottom of the double-sided tape on the protruding part of the metal frame.

4. We tile the base

After installing the frame, you can proceed to facing the base with ceramic tiles. The color of the tiles is recommended to be selected in accordance with the general colors interior. If you are not a fan of traditional style solutions, then you can experiment with unusual colors. Used for tiling adhesive mixture, which is applied with a spatula on the base and reverse side of the product in a thin layer. To give tiles the right dimensions, you need to walk on it with a grinder.

After installation ceramic tiles be sure to treat all the seams with a grouting compound, and remove the excess mixture with a spatula. After finishing, leave the finished base to dry completely - approximately 2-3 days. The final stage of work with facing tiles is its cleaning. To do this, take a small piece of cloth and use it to remove the remnants of glue and grout mixtures, as well as dust and debris.

5. Decorate the glass window

After that, you can proceed to decorating the base. You can use as decorative material small pebbles, sand, shells, dried flowers, coins, beads, sparkles, flower petals, depending on the final result of your creativity. Lay out a beautifully chosen decor inside the glass window.

You can also apply any image or pattern to the glass with ceramic paint using a stencil. It is possible to tint glass under a mirror or arrange a glass floor in an apartment with a frost effect. And a special film, which is usually laid between sheets of glass, will help to give the floor any color.

6. We mount the backlight of the glass floor

It is impossible to imagine a glass floor without filling it with light. Remember that not all lamps are suitable for lighting; halogen bulbs should not be used at all, because they can heat the glass very much. As a source of illumination, you can use fluorescent lamps and neon tubes, LED spotlights and a luminous cord. If you have arranged a glass floor for the whole room, then you can light spotlights under it.

To add lights, decide in what order you will place them. The choice of colors is unlimited, at your discretion. Lamps can be positioned arbitrarily to highlight individual decorative elements, and around the perimeter.

Among all types of lighting, neon lighting is considered the most preferred. Neon light is always soft, even, without visible shadows. In addition, the use of this type of lighting will allow you to give the glass floor a variety of geometric shapes, since neon tubes can be mounted even in hard-to-reach places.

Modern technologies allow you to turn on the backlight automatically at nightfall using a special electronic unit, change its color and intensity. The solution of "light music" is also available - you can recreate the appropriate atmosphere in the interior with the help of blinking speed and a certain color of the backlight - from romance to disco.

7. Fasten the glass panels

Upon completion of the decorative part of the work, you can proceed directly to the installation of the glass floor. Glass panels are mounted on a sealing element that is attached to a metal frame. Remember that glass should never come into contact with metal elements and fasteners. In order for the panels on the metal frame to hold as securely as possible, a thin layer of sealant should be applied to their reverse side.

Do not forget to fix the structure with steel bolts, and seal the seams between the panels with sealant. After that, a decorative profile is attached, it is also placed on a sealant, which excludes the contact of the finishing frame with the glass surface.

When arranging a glass floor with your own hands, you should remember that such a floor also has its drawbacks. On the coating, even with careful handling, may appear over time different kind scratches and abrasions. To prevent this from happening, it is recommended to use high quality glass panels, upper layer which is made of tempered glass. In addition, the glass floor is quite slippery. The smoothness of the floor in this case will help to reduce sandblasting strips and linear ornaments.

Modern designers are trying to bring something to the interiors that would make the room at home or office unusual, but at the same time beautiful. One of these innovations can rightfully be considered a glass floor. This technology has been used for several years, during which it managed to gather a lot of fans. And this is not surprising, because such an element is very bright and original. It may well become the central part of the entire interior composition.

In order to enjoy such beauty, earlier it was necessary to call a whole team of craftsmen. Today we offer you to do the installation of glass floors with your own hands. Of course, such work can cause some difficulties and difficulties for beginners. But a little patience and diligence, and you will surely succeed!

Advantages

Needless to say, first of all, the glass floor attracts attention with its originality and unusual design. appearance. Its aesthetic qualities are what more than half of all consumers prefer in favor of such an unusual interior decor. In addition, glass can be both the entire floor and its individual parts. This technology fits perfectly into those interiors that are necessarily overloaded with heavy massive furniture or there is too much of it. Glass floor - another good opportunity visual magnification space. Despite the fact that the height of the ceilings is slightly reduced, the effect of the "window in the floor" allows you to visually make the space more voluminous and spacious. It is also worth noting that this type of floor is not afraid of loads, and also gets along well with almost all cleaning products. Bacteria do not multiply on it, which is especially important for rooms where allergy sufferers and small children live.

Glass floor allows you to visually enlarge the space

Types of glass floors

Today, designers offer a fairly extensive one, each of which can fit perfectly into your room:

Features of the choice of material

If you decide to make a glass floor with your own hands, the first step is to go to a construction hypermarket and select all the materials necessary for work. First of all, this. It is a three-layer heavy-duty construction that can withstand loads up to four hundred kilograms. Each of the three layers has a thickness of at least 8 mm, which ensures maximum strength. If just such a layer cake» will not be available, we also recommend that you look at tempered laminated glass. It is coated with a special polymer, which includes hollow glass microspheres.

Glass must be durable

If you choose laminated glass, make sure you measure the material you need as accurately as possible beforehand. After all, it cannot be cut and customized if you counted something wrong. If you are not confident in your abilities, it is better to ask a specialist to make the necessary measurements.

The frame will be mounted on a rigid profile, and the joints between the plates are mounted on a decorative profile. If you plan to install LED backlighting, choose a decorative profile that can also cover it. Do not forget to buy other related products. Decide on that flooring, which will be inside a glass niche, as well as the materials with which it will be attached.

Do-it-yourself glass floor

First you need to decide what type of floor you decide to install. This is important in order to know how to proceed further: make a recess or build a podium. The deepening is most often performed at a distance of fifteen to twenty centimeters. Choose exactly the shape that best suits your interior. If you are trying your hand at this kind of work for the first time, it is best to stop at a rectangle or square.

When the recess in the floor is ready, you need to equip the metal frame around the perimeter of the glass section. Its dimensions must exactly match the section in order to withstand the maximum loads on the slab in the future. The frame must be placed in the recess at a distance that covers the thickness of the glass and the seal.

Many decorate such an element of the floor with an additional one. In this case, you need to make a hole for the output of wires. The frame is attached to the base with bolts, and the parts of the profile are connected to each other with self-tapping screws. When the frame is ready, you can proceed to finish the base. It can be laminate, tile or any other facing material. It is customary to choose such shades of cladding that would be combined with the interior. Alternatively, you can use sharply contrasting shades. If you use a tile, you should wait for the solution to dry completely, and only then carry out the remaining work. And there won't be many of them. You can do lighting. For these purposes, a luminous cord, fluorescent or LED lamps, neon tubes are best suited. The most preferred is last option. Neon lighting is quite soft and diffused, it does not create clear shadows and edges. In addition, they can be installed even in hard-to-reach places in a niche or podium. There is a special electronic unit that allows you to automatically set the inclusion of neon lights in the floor.

At the next stage, you need to lay out decorative elements on the lining - dry plants, flowers, pebbles, beads, crystals, sand, pebbles - and cover the entire composition with a glass plate from above. Glass should not directly touch the metal frame, otherwise it threatens to crack. A special sealing element is placed under the glass and a thin layer of sealant is applied. Steel bolts will help reliably. The seams between the panels must be additionally treated with a sealant and a decorative profile should be installed on it. It is also placed on top of the seal, which avoids chips and cracks.

The glass floor is a sophistication that modern design already ceased to be considered something out of the ordinary. Now you can come across low-quality panels, on which noticeable scratches and chips appear over time. Therefore, we advise you to purchase products famous brands and only at authorized points of sale. Share your tips with us and our readers on arranging a glass floor in your home.