Recently, more and more often in private houses and city apartments you can see roller blinds. These products not only decorate the room, but they also make it cozy and beautiful. At first glance, it may seem to you that only a professional tailor can sew these products. This is not true at all. Everyone can make roller blinds with their own hands. This will require diligence, curiosity, desired material and knowledge of the work itself.

How to sew curtains with your own hands?

The first step is to build a pattern for the future curtains. There must be at least 2 such parts. Two cut pieces of canvas must first be swept away. This is done with the help of large stitches from the wrong side. The swept fabric is leveled and sewn on sewing machine. After you have sewn the three sides of the product, you should turn the product right side out. Then carefully sew the fourth part. It should cover the entire structure from above. The stitched blank of the roller blind should be thoroughly ironed, steamed with a hot iron with steam.

In order for the roller blinds to be constantly stretched and not sag, you will need to install a special bar. For this, a special pocket is provided on the product. So, to install the rail you need to tuck the bottom edge of the product and stitch it along the edge of the product. You will have a compact pocket, and the bar will be inserted into it. The rail on which the roller blind will be mounted is made of natural wood- This is a bar a little smaller than the pocket itself.

Now we are engaged in laying the material. We put the canvas on a flat table, place its upper part around the bar, and then fix it furniture stapler. Everything, your blinds are almost ready, but in order to build them more attractive, you should show imagination and fiction - you can additionally decorate the curtains with bright ribbons, any other decorative accessories.

Homemade garters for curtains

Instead of bandages, ready-made tapes are usually taken. Such products in in large numbers implemented in haberdashery, but if you have a fantasy, then you can make ribbons for decorating roller blinds yourself. For one product, you need to take two oblong strips of fabric, then we sew them from the inside on three sides, the sewn part is turned inside out, and the fourth side is tucked neatly and stitched from the outside. For one product, at least 2 garters will be required, however, if the window is wide and large, then at least four such products must be sewn.

There is a lot of information on the Internet on this topic. How to make roll structures with your own hands will help a training film, which clearly and in detail describes all the stages of work. So, we made a garter, now, using a construction stapler, we attach it to a wooden beam. We assemble the lower part of the curtain into an elegant bow or knot, this design will give the interior of the room an atmosphere of simple and ease. Sometimes roller blind ties can be replaced with nylon cord, but other available materials can be used.

They should well strengthen the design of the curtain when it is closed. So, do-it-yourself roller blinds are not difficult to make, they will help create coziness in the house, perfectly complement the design of the room, go well with window blinds. This design will cheer you up, become your pride and delight for the eyes. Things made independently with their own hands are truly unique, their design is original, it conveys the warmth from the hands of the master, his inspiration and imagination.

Today on sale you can find a large assortment various types of roll products. Different styles and directions are embodied in the design of curtains, they are simply indispensable for decorating the interior of the room. Everyone is well aware of the saying: "How many people in the world, there are so many opinions." This is really about choosing roller blinds for windows. Eyes just run up from the variety that manufacturers offer us. Here, the main thing is to know what you plan to achieve when decorating the interior of a room or room.

If you are practical, you care about how your home will look, then you should pay special attention to such a product as roll structures, they are somewhat reminiscent of blinds. Their structure will help protect the room from prying eyes, create a pleasant twilight in the room. A product of this design easily passes the rays of the sun into the room. With them, you can additionally install blinds, their design allows you to fully or partially close the window.

Roman roller blinds

Roller blinds By design, they are somewhat reminiscent of blinds; they can easily replace conventional products of the classical type. The design of curtains will create freshness, originality and novelty in the interior of your home. If you have not found the curtains you need, then you can make them yourself, with your own hands, with a little effort and diligence. To create such a design, you can use any materials.

This will require wooden blocks and various pieces of fabric. In the master classes that can be found on the Internet, the manufacture of roller blinds on their own is described in detail. The most common type of roll structures are Roman blinds. It is quite possible to make them with your own hands, only follow the instructions and sequence of work.

For tailoring you will need:

• haberdashery cloth;
• construction stapler;
• liquid construction nails;
• special glue;
• tailor's scissors;
• portable sewing machine.

When constructing roll structures, glue is used. It allows you to work without seams. But in order for the product to look beautiful and harmonious, additional seam to be sewn. To do this, fold the fabric in half, into 2 identical parts, then tuck it along the edge of the product at least 2 times. The finished design should be well ironed and stitched on top.

How to measure when making roller blinds

Now let's take a look at the fabric measurements. for curtains small size you will need a piece of canvas, at least 108 centimeters long. Via ballpoint pen and rulers, we calculate measurements from the wrong side of the curtains. Then we glue the crossbars with glue, which we place along the pre-drawn dotted lines. For such work, construction glue for fabric is used. Work must be done cleanly do not abuse the glue, because when it dries it will harden and can be seen from the outside of the fabric. So, we glued the material, now we need to carefully straighten it so that there are no wrinkles on the product, then we glue the slats on it.

Making a room with the help of roller blinds will not leave anyone indifferent, their even and symmetrical folds will give the room a strict, conservative look. This design will not only decorate the room, but also serve as a good protection from bright sunlight, and at night completely hide the room from prying eyes. To create them, you need very few materials. This:

• several pieces of fabric;
• special glue;
• rail made of wood;
• sticky paper;
• electric iron;
• stapler;
• small hammer;
• construction nails
• measuring tape;
• stationery buttons.

This material is quite enough to make curtains yourself, and showing imagination, fiction and using improvised materials, you can make exclusive and original curtains.

Traditional curtains are no longer so popular in home interior. Now it has become fashionable to use it as a decor for windows. Such popularity is fully justified, since these curtains are extremely easy to use and care for. Making roller blinds with your own hands is not at all difficult, because they are a fabric or paper sheet that is twisted into a roll. It is only important to choose the right design of such curtains so that they harmoniously fit into the home interior.

Advantages

Roller blinds, made by hand, have many undeniable advantages. They not only fit perfectly into any interior, but also perfectly protect from sunlight. You can choose from a rich assortment on the market, the model that will suit you completely. However, you can make roller blinds with your own hands by choosing fabric and even paper as a canvas.

If you want to achieve maximum light transmission, choose a denser material that will prevent the sun's rays from entering the room. In addition, the air gap created between the roller blind and the window will save heat in winter.

Mounting methods

There are several methods for attaching roller blind mechanisms. You can mount them inside on top, above a frame, on a wall, or on a ceiling. It all depends on individual preferences. For example, if you often open a window to ventilate the room, attach the mechanism to the frame. Anyone can try to make roller blinds with their own hands. Photos of these curtains are presented in our article.

Mounting options

The design of such curtains can be open or closed. The first option is the cheapest and easiest. The principle of operation is as follows: the web is freely wound on the shaft, and in the expanded form it is held by a rail attached from below. In the second option, guides are additionally used to protect the structure from possible deformation and ensure the tightest fit of the curtain to the window.

There are also two ways to install roller blinds on a window:

• using glue or construction tape;
• using self-tapping screws.

If you decide to make a roller blind with your own hands, use the first option, since it is the simplest and is suitable for installing light weight structures.

The rest of the wallpaper: everything is in business!

Many accessories for decorating the interior are quite simple to make with your own hands. Roller blinds are one such design. I must say that making such curtains is extremely simple, for this you do not need to have any special skills. It will take little time to make such a roller blind, but the result will be amazing!

Decorate windows with paper shutters that will look very creative in any apartment. If you still have wallpaper from the last repair, you can make such a curtain in just one evening. Make your own roller blinds out of paper, it's very simple.

Step number 1. First, measure the width and height of the glass.

Step number 2. We draw a rectangle on the wallpaper. Its width will be equal to the width of the glass, and its length will be ¼ more than the length of the glass.

Step number 3. Cut out a rectangle and fold it with an accordion, forming folds no more than five centimeters.

Step number 4. With an awl, we pierce holes throughout the middle of the paper web. Insert the cord. We straighten the canvas, fixing the garter with a knot at the top of the future curtain.

Step number 5. We also glue the construction one here and attach it to the frame.

Step number 6. We make out the five lower folds with a “peacock tail”. To do this, glue them with adhesive tape from the inside.

Step number 7. Bring the end of the cord inside out and insert the latch.

So our do-it-yourself roller blinds from wallpaper are ready! The photo below will tell you how to do it right.

We make roller blinds with a rod

Now let's make a fabric curtain. Prepare the following tools:

How to do?

First of all, cut and sew the fabric in such a way that you get a bag. It will need to be turned out. Sew up the remaining edge and iron. For slats, it is necessary to form some pockets. Do it this way: fold the edges of the roller blind 3 cm on top and 1.5 cm on the bottom. Sew. Insert the straps into these pockets. Carefully screw in a pair of screw rings on top of the bar and from the inside. Do these manipulations in the upper bar. Step back from one ring on the front side 5 cm to the edge and screw in another ring.

Cut two cords. The length of one should be 3 times the length of the curtain, and the second should be ½ the length of the curtain longer than the first. Tie the cords around the rings. The one that is longer, attach to a separately screwed screw. Pull the cords along the wrong side, wind them over the front side and pass through the rings again. Then thread them through the common loop on the side and tie.

The original roller blind is ready, it only remains to be attached to the window. Screw 2 hook-screws into the frame so that they are opposite the upper rings. Hang the design. Screw the third hook into the side of the window frame. You will wind a cord around it, which will help to hold the roller blind firmly and securely.

Step-by-step production of curtains with a lower shaft

Stage number 1. Treat the double-sided fabric by folding the edges.

Stage number 2. Form a pocket from below. It will serve as a weight and shaft.

Stage number 3. Attach Velcro to the top bar with a stapler. Attach the second part of the roller blind at the top.

Stage number 4. Connect the canvas to the bar and wrap it.

Stage number 5. Cut two cords. The length of each of them should be 2 curtain lengths and another 20 cm.

Stage number 6. Throw the ties over the bar at the top and attach to it with a stapler.

Such a roller blind will roll up and straighten out manually. You can easily adjust that height with tied cords. Do not forget to additionally strengthen the bar with self-tapping screws. If you set a goal, it will be easy to make roller blinds with your own hands. The step by step guide will help you.

Remodeling a shop roller blind

Sometimes it can be quite difficult to choose a roller blind for a certain interior design. If you suddenly have such a problem, you can absolutely calmly purchase a ready-made design in the store and remake it to your own needs. How to build roller blinds with your own hands? The master class will help you in the implementation of your plan.

We will need the following tools and materials:

• roller blind;
• medium-weight fabric (cotton, twill or canvas);
• polyester thread;
• cutter;
• scissors;
• double-sided tape;
• roulette;
• sewing machine;
• iron.

Master Class

Each finished roller blind comes with instructions for installing the mount, so attach the mechanisms according to the recommendations. Remove the vinyl sheet from the cylinder and remove the weight. Now measure inner part roll between clamps. Add 3 cm to this result. Designate this value with the letter A. Measure the distance from the window sill to the fastening mechanisms. Add 25 cm. This is the B value. Take a piece of fabric and cut it out. Its width is value A, length - B. Lay 1.5 cm from the sides of the cut and iron. Sew along the seams. From the bottom edge, first lay 1.5 centimeters, iron and lay another 5 cm. Sew along. You have a pocket in which you will put the weighting agent. Attach the finished curtain to the roll with adhesive tape. Fix the fabric and twist it. Install the curtain and insert the weighting agent.

How to care?

Everyone knows that dust quickly accumulates on such curtains. That is why they must be constantly monitored and kept clean. Typically, roller blinds are periodically vacuumed using a furniture nozzle. It is not necessary to remove the canvas from the window. It just needs to be closed and vacuumed. The same manipulations should be done from the wrong side. If yours is made of plastic, you can safely wash them with water with the addition of washing powder. Perhaps it will be more effective to clean the roller blinds with a cloth dipped in alcohol. Just wrap it around a rubber spatula and start processing. After completing the work, treat the dry ones with an antistatic agent.

Just don't wash paper curtains with water. Of course, it will be a shame for you to spoil the roller blinds, made with your own hands from wallpaper. Clean them with a special paste designed for paper sheets. You can also use a mild stain remover. Be sure to wear rubber gloves when handling this type of product.

Russia, Moscow region, Moscow +79041000555

DIY roller blinds: step-by-step instruction+ video

It takes ~5 minutes to read

Save

Every hostess dreams of changing the interior of her house from time to time. There are many ways to do this. The easiest and cheapest is to change the curtains. They can be purchased at any market or store. It will be easy to do this, since the choice of curtains is huge. But best solution will sew the curtains himself. Even those who have never sewed such products can easily cope with this task. You will learn how to make roller blinds with your own hands by reading the step-by-step instructions of the article to the end.

Save

Disadvantages and advantages of such curtains

Advantages:

1. No light seeps through them, nothing can be seen through them, that is, no one can look into your window.
2. They can be hung anywhere.
3. They take up little space.
4. Fresh air passes through the roller blinds easily and freely.
5. These blinds are perfect for any room.
6. Rolshtora can be hung both independently and in addition to others.
7. Their selection is huge.

Flaws:

1. Roller blinds absorb bad smells.
2. They need to be constantly looked after.
3. After a while, they may warp.
4. The mechanism that raises the roller blind quickly fails.

Save

How to sew roller blinds on plastic windows with your own hands

To sew roll curtains with your own hands, you need to pick up the right fabric. When choosing a fabric, it is necessary to consider that it is:

• natural;
• Moisture repellent;
• Reflected light.

For the manufacture of roller blinds, you can use a fabric of the same color or multi-colored and with a pattern. It will depend only on you and your choice.

Making your own hands: step by step instructions (photo and video)

Save

To make a roller blind with your own hands, you will need:

• Textile.
• Cord.
• Rope.
• Ribbon.
• Weighting agent (metal or wood).
• Rod shaft ( wooden beam or metal tube).
• Screwdriver.
• Self-tapping screws.
• Drill.
• Iron.
• Sewing machine.
• Fasteners.

Save

Master Class

1. Determine the width of the roller blind. Measure the length of the roller and subtract one centimeter from the resulting length.
2. Now let's determine the length of the curtain. To do this, measure the distance from the roller to the window sill. Add twenty centimeters to the result.
3. Now make a curtain pattern. Measure on the fabric the width and length that you got when measuring. Cut out the resulting rectangle. There should be two such rectangular segments.
4. Fold the pieces with the right side inward and sew on three sides. Should be a bag.
5. Turn the resulting bag inside out and iron with an iron.
6. Let's move on to fixing the weighting agent. Its length should correspond to the width of the curtain. This is necessary so that the roller blinds do not hang on the plastic window. Fasten the weighting agent, tuck the fabric and sew, stepping back five millimeters from it.
7. Now we need to prepare the tapes. With their help, the curtain will hang in a folded state. From the fabric, cut a ribbon eight centimeters wide. And the length of the ribbon depends on the height of the window and is calculated using the following formula: 2 * the height of the window opening + 30.
8. Fold the resulting ribbon lengthwise, right side inward and sew. Then the tape must be turned out, ironed and sewn up the open side. Do-it-yourself roller blinds are ready.

Save

Do-it-yourself mechanism for roller blinds

First option.

For the manufacture of the mechanism will need:

• Staples;
• Video clip;
• Duct tape;
• Screwdriver.

Manufacturing steps:

• Let's start with brackets. If the curtain will be inside the frame, then the brackets are placed three centimeters below the top of the curtain. If the curtain is outside, then the brackets must be fixed five centimeters above the window opening. The round hole bracket is installed with right side, and with a square hole - on the left side.
• The distance between the staples should be the same as the length of the roller. If so, then fix the video.
• Now we fix the curtain on the roller. Lay it face up, and position the roller at the top of the curtain. Wind the edge of the fabric around the roller and fix it with adhesive tape.
• Throw the ribbons over the roller, and fix them in the center with a stapler.
• Insert the curtain roller into the brackets. The roller blind for the plastic window is ready.

Save

Second option.

For him you will need:

1. Bar.
2. Adhesive double-sided tape.
3. Glue gun.
4. Special mounts.
5. Cord and hooks.
6. Rails are wooden.
7. Weighting agent.

Manufacturing instructions:

• First you need to cut wooden lath. Its length should be less than one centimeter of the width of the curtain.
• Cover it with the same fabric from which the roller blind was sewn.
• Glue double-sided sticky tape to the bottom of the bar.
• On the reverse side the bar must be attached with special fasteners.
• Insert the weighting agent into the stitched roller blind.
• Attach the roller blind to the prepared cornice.
• Take the cords, tie them and bring them out through the special holes. Then line them up and tie a knot.

A video on the manufacture of curtains and a mechanism will help to cope with this task.

How to make with a garter belt

To make such a roller blind you will need:

• the cloth;
• sewing machine;
• iron;
• weighting agent;
• bar and rail.

Save

Manufacturing steps:

1. First you need to make a pattern from the fabric. Measure the desired width and length of the future curtain. Cut out the resulting rectangle and sew it on three sides. Turn the fabric inside out and iron it.
2. Insert the rail into the unstitched side, and then sew it up. This will be the bottom.
3. Attach the top of the roller blind to the bar.
4. Now prepare the ribbons. They should be twice as long as the roller blind itself. There should be two such tapes.
5. Attach the ribbon to the bar.
6. The roller blind is ready.

Do-it-yourself roller blinds

To make roller blinds you will need:

• fabric for sewing;
• paper template;
• simple pencil;
• bar of soap or chalk;
• ruler;
• adhesive pad;
• fringe;
• special glue for fabric.

Save

Master class on their manufacture:

1. First you need to make a pattern. It is done in the same way as for ordinary roller blinds. But there is a difference - you need to leave an allowance of 25 centimeters. This is necessary for finishing the edge.
2. Now make a template. It is made from plain paper. Its width is equal to the height of the carved edge, and its length corresponds to the length of the roller minus one centimeter. On the resulting rectangle, make the pattern that you like.
3. The rectangle must be folded with an accordion. On the first strip, draw the desired pattern. Cut the rest of the strips along this pattern. So, the pattern will be the same across the entire width.
4. Make a coulisse. Insert a tube into it, and sew the edges.
5. Place the paper template under the drawstring and secure with pins. Circle the pattern with a piece of chalk.
6. Glue the fringe along the bottom edge.
7. Fix the resulting roller blinds on the roller.

Now you know how to make roller blinds with your own hands, as well as how to make roller blinds yourself without the help of a master. Good luck!

Some do not imagine a cozy atmosphere without all sorts of multi-layered draperies with waves, ruffles and others. decorative elements. And others prefer a laconic design with simple forms. Roller blinds work well for this task. A simple design helps to make them with your own hands, and even the window closes both from the sun's rays and from other people's views.

Variety of materials

When choosing a fabric, it is worth relying on its structure. Color solution and the degree of transparency can be any. The appearance in the manufacture of roll curtains depends on the right fabric. The density of the fabric affects the shading in the room. The thinner the canvas and the lighter the colors, the more light will pass through with the curtains down. It is better to choose fabric with double-sided printing, especially when it comes to private homes.

If a fabric with the desired density or a two-sided pattern is not found, then the existing segment can be folded in half. When folding, it is important to make sure that the pattern on both sides is positioned correctly, as planned. It is better to choose a shade for furniture drapery, and not for wallpaper. Reflective properties will help balance the microclimate in hot weather. You can use traditional fabrics:

1. Cotton.
2. Nylon.
3. Satin.
4. Viscose.
5. A combination of several types.

You can also use thin boards or bamboo planks. They can be purchased with a ready-made interlacing between themselves and the applied pattern. Often they are sold as napkins and coasters. They have a high resistance to fading, to mechanical damage and to household chemicals. The disadvantages of making bamboo sunshade roller blinds are rather heavy weight, limited choice of colors and noise during operation and drafts.

The most common material is polyester. It is treated with antistatic and antibacterial compounds.

This provides a significant reduction in the amount of dust that settles on the curtain. Therefore, general cleaning will be needed much less frequently.

For each room, its own degree of darkening of the room is selected. For bedrooms, it is customary to choose denser sunscreen fabrics to block out the morning sun. But at the same time, after sleep, you somehow need to get up and in the twilight it is much more difficult to do this. Therefore, if the roller blind is used without additional curtains, then it may be worth using combined option dimming.

In living rooms, offices and kitchens, transparent and translucent fabrics with good transmission properties are mainly used. These fabrics include satin, silk and cotton. Combined day-night canvases have an alternation of dense and transparent stripes, which allows you to change the degree of darkening, as when using blinds. For the kitchen, materials impregnated special formulations. This allows the curtain to not absorb odors for a long time.

Web preparation

After determining the type of fabric, it is necessary to take measurements and determine right size material. When do-it-yourself fasteners for roller blinds on plastic windows are installed on the frame itself, they measure the dimensions of the glass. If the installation is carried out on a window opening, then first marks of the intended placement of the canvas are placed on the wall. After that, measurements are taken.

To the obtained dimensions it is necessary to add for allowances:

1. 2 cm on each side to the width for stitching.
2. up to 15 cm to the length for weights and rods.

If the fabric is with a one-sided pattern, then you need to prepare 2 cuts according to the obtained sizes for the front side and the wrong side. The fabric can have different colors on both sides. One canvas can be sewn from several cuts. For garters, you can use various ribbons, decorative cords, or fabric sewn with ribbon. Their length is calculated by folding two lengths of curtains and 25 cm per tie.

On the fabric, the dimensions are marked with chalk or a bar of soap. It is better to cut off with sewing or new scissors, so as not to spoil the fabric with puffs and torn edges. The canvases are folded front sides inside, sweep the top and sides. You can sew the halves on a sewing machine or by hand. Then the product is turned inside out, and the seams are ironed. If the canvas is large in width, then you should make sure that the seam falls on the frame binding. This measure will make it almost invisible.

The upper part of the canvas is sealed by sewing on the braid. This measure will allow you to attach the curtain with a furniture stapler or small nails to a wooden bar. Dense braid will protect the fabric from gusts under loads from weighting agents during management.

Installing such curtains with your own hands will not be difficult. Do-it-yourself step-by-step instructions for roller blinds include the following steps:

With the same lifting mechanism you can make roller blinds with Velcro. To do this, the bar is sheathed with a separate section with Velcro, and the second part of the Velcro tape is sewn to the top of the curtain.

In this case, the roll must be rolled up manually and fixed with decorative tapes.

The lifting mechanism can be purchased ready-made. It remains to fasten the curtain to the horizontal bar with Velcro or sew a pocket on a typewriter. The kit may include various decorative and protective elements, such as a roller box, vertical guides and a bottom bar with a latch. Lifting systems are:

1. Control of the chain or cord by a toothed drum.
2. Roller lifting mechanism.
3. Spring control does without additional clamps.
4. The electric drive system is the most expensive. Works from the switch or on the panel.

Making stained glass models

To create them, you can use any material, even tulle. Peculiarity appearance in that they resemble an hourglass. The canvas with a transverse belt can be assembled at any level. The essence of assembling a stained glass curtain with your own hands is to install the upper and lower guides and stretch the canvas between them. As guides, you can use wooden planks, metal tubes, a string or a thick fishing line.

The choice of material tension option affects the removal of vertical and horizontal dimensions:

You can still use the patchwork method, but first you need to choose a stained glass pattern. Sewing a simple mosaic version of the curtains begins with sewing together a patchwork fabric from multi-colored stripes. Then the finished canvas is cut at an angle of 45 degrees into strips. The connection of the resulting bands is sewn with an offset of the selected number of rhombuses. This method can give any pattern, and the fabric is exclusive.

Greek and warm options

Antique ornamentation gives an antique direction to the created styles. When using pastel-colored fabric and meander, you get greek curtains with their own hands, which can have any design. They can be made in a classic curtain look, a roll-curtain or a Roman design. The main difference and feature in the design is the symmetry of both the drawings themselves and the curtains. Colors containing only two colors predominate. They can be decorated with tassels, cords or backstage.

To in winter time to reduce heat loss at home, you can make warm curtains for windows, the colors of which depend only on the preferences of the owner. The design of the fixtures and the model is chosen according to the design of the room or according to financial capabilities. Warm curtains in Roman design or in the form of roll-curtains will look good. Having a length to the windowsill, they will fit snugly against the walls and will not allow warm air from the batteries to simply go out the window.

A heater is placed between the sheets of decorative fabric - such as is used for kitchen tacks. This procedure is done as follows:

Fixing the heat-reflecting fabric on both sides will prevent it from settling. Now it remains to iron and hang the material on the selected design. To the finished curtain, you can add various decorations to your liking.

Making a window in a room or on a loggia is a responsible process that must be approached carefully. The design approach is important, the presence of curtains is necessary, however, if there is not enough finance for expensive textiles, then you can sew a rolled product yourself.

Do-it-yourself cassette curtains: individual characteristics

Do-it-yourself cassette products are a great replacement for blinds. Such decorative elements can be used as a separate object and as an additional part to arranged curtains. Such designs have their own advantages, which favorably distinguish them from their "brothers".

Advantages of the model

• Curtains can be placed both on standard window systems and on plastic ones.
• The material fits snugly to the window system, so it is impossible to look into the room from the street.
• The fabric is easy to wash, which greatly simplifies cleaning.
• Curtains can be thick, translucent, which makes it possible to darken the room.
• Models can be made in a variety of design solutions, style directions.

The hostess can choose for her product a material with a pattern that will ideally fit the style of the room. In addition, the canvas on the window may not be fully raised, which makes roller blinds incredibly functional. It is impossible not to say what is the difference between the Roman model and the rolled product. These elements are similar in appearance, but they are different in the lifting mechanism. The Roman model is assembled with an accordion, and the rolled model is lifted with the help of garters. Both designs have a ribbon ribbon sewn into the fabric. When closing, Roman ones create the effect of folds, and roll ones close in the form of a roll. The Roman model is no less popular element of decor; they are often used to decorate window systems and balcony rooms. Below we will talk about how to do it yourself second type of curtains.

How to choose material: we make roller blinds

Choosing the right fabric for DIY sewing is very important. Designers give some tips on choosing the right fabric. If the room is pasted over with light wallpaper, then the material should be selected in accordance with the color palette. upholstered furniture, textiles, which are also present there.

It is not recommended to stop the choice on too dark colors, since such curtains will not look joyful and gloomy. Therefore, it is better to choose a fabric that is cheerful, delicate, warm, the main thing is that the curtains do not stand out from the general style.

If the hostess is tasked with visually expanding the space, then a translucent material should be chosen. If you plan to design windows located from the south, then you can choose the cold tones of the material, warm colors are more suitable for northern windows.

Selection of fabric according to the style of the interior

Speaking about style, designers agree that:

1. For classical style dense material with stripes or classic patterns is more suitable;
2. Under the country style, you should take a more transparent, airy fabric;
3. Under the styles of minimalism, hi-tech, it is better to take simple plain fabrics.

It is important to note that the style direction is not a set of rules that help organize the overall interior, but only a parting word that guides mentally. Any direction in style has its own features, traits that are forbidden to be ignored. The immensity of fantasy is the foundation on which a unique design project grows.

Master class: how to sew roller blinds with your own hands

Detailed step by step instructions are not complicated. The first step is to lay out the selected fabric. Next, you need to cut the product, according to pre-compiled calculations.

You should get two identical canvases, which are subsequently sewn together. After sewing, you should get a "bag", which should be turned right side out.Then you need to fix the weighting agent. To do this, you need to sew a special pocket, and then stitch the "bag" completely. Alternatively, you can stitch the weighting agent already inside the workpiece, retreating a little space, and after that, sew it up entirely.

Next, you need to wrap the curtain through the rod and secure with a stapler. This is done if the bar is made of wood. When the bar is metal, the curtain is thrown over and sewn up. In exactly the same way, you need to attach the ties, on both sides, but so that the ends hang down below the curtains. Also, the masters are not against the use of not a stapler with brackets, but, for example, locks or hooks. Thanks to these devices, roll products will be easier to remove for washing. If the structure is planned to be attached to a plastic window system, then it is possible to strengthen the product with double-sided tape. A eIf a rod-shaft is used, then it must be fixed above the window or directly to the frame itself.

It is easy to experiment with this product, you can change the style, mood in the house, choosing different fabrics, with different patterns, ornaments and textures. Fantasize, perhaps limitlessly. This is how, in a few steps, it is possible to make roller blinds, and the mounting and mounting mechanism will be discussed below.

Do-it-yourself mechanism

The mechanism for the product may be different. For example, you can make a lock mechanism in the form of a side lace.

To do this, follow these steps:

1. On top of the finished product, it is necessary to sew ribbons of fabric, which must first be threaded into plastic rings.
2. The tapes should be placed 7 cm from the top edge of the curtain and 15 cm from the side edge.
3. Next, you need to take a nylon cord and fasten it to the bar from the side of the window. Hooks may be needed at this stage. The cord must be threaded into the rings and fixed on the wall to the side of the window.

Nylon cord is also better to choose carefully, today they are on sale in the most different colors. When choosing, you need to pay attention to the fact that the cord must match the color of the roller blinds, otherwise they will look ugly. Everything should be in harmony and give the room an atmosphere of coziness and comfort.

Do-it-yourself quick installation of roller blinds

Products can be fixed on the window itself, on the ceiling, on the wall. The installation method must be chosen depending on the style of the room. Not so long ago, the most popular method of fastening was considered ceiling mounting. This method has its drawbacks, since when the curtain is lowered, it will be impossible to open the frame for ventilation. Installation on a plastic window opposite makes it possible to open the frames at any time. It is possible to mount it yourself in just 5-10 minutes.

Installation on a plastic window system using adhesive tape is carried out as follows:

1. The window frame must first be degreased. To do this, treat plastic surfaces special means, a solvent that can be bought at any hardware store.
2. Next, you need to take double-sided tape and heat it with a hair dryer. Remove the protective cover from it and attach to plastic frame above.
3. And the last step is to fix the product itself on the adhesive tape, or rather its upper part, having previously removed its second protective layer from the adhesive tape.

This is how easy it is to strengthen the curtains with adhesive tape. Mounting can also be carried out on a bracket made of wood or metal. For such systems, it will take a little more time, special equipment, self-tapping screws. One way or another, having spent not so much personal time and patience, you can sew beautiful roller blinds that will last a single year.

Do-it-yourself installation of roller blinds (video)

In conclusion, we note that it is possible to extend the service life of a home-made product if, when mounting the product, fix its lower rail, on which the material is fixed. To do this, you can strengthen the magnets with adhesive tape. This will allow you to open the window at any time, avoid sagging and deformation, which will accordingly increase the service life of the product.

Attention, only TODAY!