DIY paper towel holder. Paper towel holder

Do you want to please yourself and your loved ones with an unusual stand for paper towels? She will be able not only to fulfill her direct duty, but also decorate your kitchen, and possibly cheer up the guests! For a coaster, you can use your old wooden cutting board, wooden spoons, forks, or spatulas. And paper towels will find their place, and wooden spoons will begin a second life. If you already have all this at hand, then get to work!

So, you will need:

• wooden cutting board small size, it can be round oval or square.
• Wooden spoon and fork, or maybe you have something even more suitable with round handles.
• A small wooden cylinder with a hole for attaching a spoon. You may have something that looks like a cylinder on hand. And if not, then you have to think about what it can be made of. Maybe saw off a piece of a wooden handle from something and drill a hole of a suitable diameter, or maybe cut off a piece of a strong plastic tube ..
• Sandpaper (optional)
• Glue suitable for wood.
• Paint or varnish for wood, any color and composition to your taste. You can use spray paint.
• Soft paint brush

Step 1. Preparing the details. Prepare a suitable cylinder. The diameter of the cylinder bore should be slightly smaller than the diameter of the handle of the spoon. Ideally, if the spoon is firmly fixed in the cylinder. The locking plug may need to be shortened. If you are using old stuff, be sure to sand it down. sandpaper, then the paint will lie evenly and will hold tight!

Step 2. Construction of the structure. We begin to collect our stand for napkins. Mark the center on the base board and glue the cylinder there. It remains to find a suitable place for the plug, which will serve as a latch. To do this, place a roll of paper towels on the base, secure it with a spoon and mark the place for the fork with a pencil. You don’t need to glue the spoon, it will be the roll fixer! Now drill a hole in the base board for the fixing plug. Put a few drops of glue into the hole and insert the fork handle into it. Here is your design and ready!

Step 3. Painting. After the glue has dried well, you can start painting. You can paint the coaster in one color, or you can dream up and make a whole work of art out of it!

Increasingly, housewives in the kitchen are using disposable paper towels instead of regular textile towels that need to be washed regularly. For the convenience of using these towels, various special holders have been created that have stylish design and will fit beautifully into the interior of your kitchen. Being always at hand, you can easily wipe the table with them, wipe your hands from dirt or dishes.

Below you can see photos of paper towel holders.

Uses and benefits of towel holders

The demand for disposable towels is constantly growing, manufacturers are releasing more and more assortment and more and more advanced models in terms of functionality. First of all, for a towel, such a property as absorbency is important. As for paper varieties, they do an excellent job of this, since easily absorbing water, unlike napkins or fabric towels, they retain their internal structure and, due to this, do not leave any marks on the surface like spools, etc.

For such an important and necessary thing, people build or buy special towel holders for their kitchens.

The use of paper towels in everyday life is not limited to wiping, they are also used directly during the preparation of culinary dishes:

• French fries before immersion in hot oil are dried from excess moisture on a paper towel. And after removing the potatoes from the deep fryer, they are again placed on a towel, but this time so that excess fat is absorbed.
• Various products like pancakes, donuts, fritters, meatballs, cookies can be laid out on a paper sheet of towel before the main serving, which will give the food an exquisite taste and lower calorie content.
• Meat steaks can easily turn brown when blotted briefly with a paper towel.
• Paper towels can also be used to remove water from food (e.g. herbs, fruits, vegetables).

As for the towel holders themselves, the modern industry produces them in a fairly wide range, in different design styles, different in functionality, with additions or concise. All of them are inexpensive in cost, easy to use every day, fit into the environment and are easy to install without problems.

There are exquisite and expensive glass holders, and there are no less beautiful, but much cheaper in price, but not in quality, plastic holders.

With this kitchen accessory, you can easily tear off the required amount of a paper sheet from the main roll, and then throw it into the trash after use.

There are magnetic holders that are attached to the refrigerator door and other metal surfaces with magnets. Thanks to chromium, the metal is not subject to rust and has an aesthetic appearance.

Among the manufacturers worth noting are paper towel holders from Ikea. Unusual in shape and with a bright design, Ikea towel holders are perfect for your kitchen.

DIY holder

You can buy such a holder without extra costs if you know how to work with your hands. There is nothing particularly difficult in making even a good, pleasant-looking towel holder.

The easiest option is to make a holder out of ordinary cardboard. Here is the step by step algorithm:

• Take a rectangle of cardboard, roll it up and glue the ends.
• Attach a base from three layers of cardboard to the bottom of the table, on which the holder will hold.
• The whole structure must be painted in some color with varnish in three layers, so as not to get wet.

What are the holders made of?

The material for the holders are various substances: metal, wood, plastic, ceramics, glass.

• The most durable metal holders. Metal holders also look classic.
• Holders of unusual shapes and designs come out of wood.
• Plastic holders look nice while they have a low cost.
• Ceramic and glass holders are excellent, expensive and not produced very often.

Automatic holders

Recently, towel holders have been produced with automatic feeding towels. You can adjust the length of the output sheet in the device settings. The advantages of such a holder are obvious: it is convenient, frees up time and effort, it is roomy, it has a sophisticated design.

Types of holders

Exist the following constructions for fixing paper towels:

Floor holders: located on the floor, as a rule, they look massive and include various fixtures and departments for household needs, there are mobile models on wheels.

Desktop holders: they are placed on the table, and on the shelves, and on the surface of the built-in washing machine. They are acceptable sizes. Among the desktop holders, products from Ikea differ in minimalist form. For example, metal with a chrome-plated surface that gives a bright shine and protection against corrosion, a cylinder that stands firmly on the base, or a large wire that is surprisingly bent.

Often these towel holders various types The rolled towels are painted in bright colors, thanks to which the holders turn into one of the most remarkable accessories for your kitchen.

Wall-mounted paper towel holders: mounted on the surface of the wall, there are also magnetic holders - they can be magnetized to the refrigerator. There are wall holders in the form of arrangement of vertical and horizontal.

At the present time, it is quite simple to purchase a towel holder necessary for individual needs, used to hold and supply paper towels. famous brands Tork, Ikea and other companies are constantly expanding their range so that we can accurately and accurately select our holder.

Photo of paper towel holders

Today we will make a do-it-yourself paper holder kitchen towels. Consider two options - vertical and horizontal, suspended. The first one can be installed on any flat surface, the second is hung on the wall or furniture.

Vertical paper towel holder

This is how it looks separately and already in working condition, along with towels.

To make the holder, take:

• used CDs - 8 pcs.
• disk container
• reel of towels
• coffee capsule
• leg-split
• sandpaper
• scissors
• napkins
• brushes

Making a towel holder

As the basis of the structure, we use a container from disks. We put discs in it, gluing them together.

Glue the coffee capsule to the end of the towel reel.

Additionally, we paste over the top with paper tape.

At the top of the bobbin we make a hole with an awl. We sand it.

Carefully cover the bobbin with a napkin. First, at the top, in separate chopped pieces.

Then we paste over the bobbin with a whole napkin.

We pierce the hole with an awl.

We begin to paste over the base of the holder from the container with disks with a napkin.

We are waiting for all the wipes to dry. After that, varnish on top.

Through the hole made in the holder, we pass a loop woven from twine.

That's it, now we just have to glue together the vertical part of the bobbin and the base of the container.

A similar holder can be made for use in the bathroom.

Hanging towel holder

The second version of the holder is hung on the wall. For its manufacture we take:

• wooden sticks - 2 pcs.
• ruler
• screw pins
• drill or engraver
• hooks
• sandpaper

Making a wall-mounted towel holder

We take a wooden stick and prepare it. If there are irregularities, they must be carefully removed (for example, with a knife), and then the entire surface should be sanded.

On the prepared stick, we make small holes on both sides with an awl - for screw pins.

Now screw the pins.

The second stick should be slightly longer. We measure the levels of the screwed pins, add about 1 cm each and put marks. We drill in these places through holes for cord.

If desired, sticks can be decorated: painted, tinted, varnished, decoupage. We consider the simplest option.

We collect the holder. We put hooks on the pins. In the absence of such hooks, you can make them from wire. Hooks are needed for the convenience of changing towels.

We put towels on the lower stick. We tie a cord to the hooks and thread it through the top stick. Everything, now the holder can be hung on the wall.

If you do not have ready-made elements for hanging the holder on the wall, we make them yourself. First, we drill holes in the wall (in this case, in the cabinet door).

Then we screw the hooks on the pins into the holes.

If you are sorry to drill furniture, you can make holes in the wall. And if it is convenient to make holes on the cabinet door, you can use special suction cups instead of screw pins.

Everything, the holder is ready and installed.

Paper towels in the kitchen are comfortable and ergonomic, they have firmly entered the everyday life of every housewife. They help not to think that you need to constantly wash textile towels, change them regularly, and choose colors for the interior. To make working with towels convenient, it is important to fix the roll near the work surface. This article is about how to make your own paper towel holder.

Comfort in the kitchen

Those who use paper towels every day were able to appreciate their convenience and comfort. The basis of the roll is a cardboard tube, with which it can be hung on the holder. It is much more convenient to tear off towels from a roll fixed in this way. Making your own towel holder is not at all difficult. There are several ways to make it using the simplest tools at hand.

Holder classification

Devices for fixing towels are:

• Floor.
• Wall.
• Desktop.

What is more convenient?

• Do-it-yourself floor stand for paper towels is a fairly massive design that can be supplemented with fixtures for funds household chemicals, garbage bags. To make the design mobile, it can be put on wheels.
• The desktop holder can be placed not only on the table, but also on various shelves or a built-in washing machine.
• The wall structure, as expected, is fixed to the wall: vertically or horizontally. The mount can be made as stationary or portable.

Consider several options for making do-it-yourself desktop paper towel holders.

Method 1

We will need:

• An old, obsolete doll.
• Children's pyramid made of wood.
• PVA glue.
• For decoration: beads, rhinestones, braid.

Important! Not the entire pyramid is useful for the product, but only the base rod, so multi-colored rings can be put aside. It's great if the height of the pyramid is equal to the height of the roll of towels. The structure is stable.

How to make a DIY paper towel holder:

1. Put the roll on the rod - it will play the role of a doll dress.
2. Now separate the head from the doll and put it on the rod.
3. Decorate the puppet head and base of the pyramid.

As you can see, it turned out quite original, at the same time, nothing complicated.

Method 2

For this design option you will need:

• Old newspapers.
• Magnetic disks.
• PVA glue.
• Multi-colored self-adhesive film.

The first stage of work on the implementation of the holder for towels with your own hands is the manufacture of the base:

1. Glue several discs together using PVA.
2. Apply the adhesive in a thin layer and bond the surface.
3. Glue the next disc after the glue has dried.
4. Continue gluing the discs until the height of the base is 10-150mm.

Happened? The base is ready!

To make a rod:

1. Roll the newspaper into a tight tube. Do the job carefully, without rushing.

Important! The diameter of the newspaper tube should match the diameter of the holes in the discs.

1. Trim the newspaper at the top and bottom with scissors.

Important! The height of the rod should be about 3 cm longer than the towel roll.

1. Seal the tube with glue. After the glue dries, wrap the rod with a self-adhesive film.
2. Connect the parts carefully.
3. Insert the rod into the base.

Important! You can decorate the upper part of the design with the head of a doll or animal. It will turn out quite beautiful and original design.

Method 3

To make a towel holder you will need:

• A block of wood.
• Chair stick.
• Acrylic paint set.
• Brush.

How to proceed:

1. Saw out the base and top from a wooden block.
2. Coat the wooden circles with varnish or paint with paints.
3. Wait for the paint or varnish to dry.
4. As a rod, you can use a leg from a broken old chair, sawing off part of it to the desired length.
5. Cover with varnish or paint. Let dry.
6. Connect the details. It is important that the base, top and stem are perfectly sized.

Important! If inserted into wooden base a piece of pipe with a plug, you get a do-it-yourself vertical stand for paper towels in the newfangled bourgeois Loft style.

Method 4

This original design holder consists of leather straps and a wooden crossbar (you can also use metal).

You will need:

• Crossbar made of metal or wood.
• Pieces of a leather belt or strips of leather.
• Screwdriver, dowels, hardware.

Instructions on how to make a towel holder with your own hands, in this case it looks like this:

1. First, take measurements of the surface where you are going to use the towel holder. So you determine the possible length of the rod and the number of crossbars used.

Important! Which holder to choose - from metal or wood, it's up to you. metal structure less subject to wear. It is better to choose stainless steel as the material.

1. Prepare the crossbars. Treat the tree with an antiseptic and varnish. The metal crossbar can be left unchanged or covered with enamel paint.
2. Cut the leather straps into 2 pieces. Fold each piece in half. In each of them, make through holes with an awl. These holes serve to fix the strips on the wall.
3. Sew the straps so that the wooden or metal bar does not fall off.
4. Fix the structure to the wall with self-tapping screws or dowels.
5. It remains to put a towel on the rod and assemble the structure completely.

Important! You can decorate such a device with a soft toy, textile or wooden doll. The product will be more original and memorable.

This handmade wood hanging paper towel holder is attached to the bottom of the kitchen cabinet.

Rolls are easily placed on its removable crossbar, and an additional shelf serves to store napkins and other small things.

Photo of a homemade holder with a shelf
Side view

Necessary materials

To make a rolled paper towel holder, you will need planed pine planks. The dimensions of the homemade product are small, so you can take the remaining 15–25 mm thick trimmings from previous projects. If there is no home workshop suitable material, you can glue a shield 180 mm wide out of wood with your own hands or purchase a ready-made furniture panel of a small size.

For the crossbar, a round stick with a diameter of about 25 mm is suitable, for example, from a garden tool handle. The side handles are a little modified doorknobs. Although such details are not a problem to carve on lathe on wood. A magnet, carpentry glue, a drop of any universal glue and a screw will also come in handy.

How to make a holder

Shelf holder device

The design of the towel holder is so simple that all the work can be done hand tools: cut the grooves with a hacksaw, and then remove the wood with a chisel. Well, if there is a circular saw or a router, it will be much easier, and the connections will come out neater. What you definitely can’t do without is an electric drill and spade drills.

Start with horizontal shelves

Prepare two blanks with a width of 180 mm and a length in proportion to the rolled towels used. Saw along the edges of the grooves on circular machine or select them manual router. Sand the edges with sandpaper.

The parts of our towel holder are glued together with grooves and ridges. Strong docking nodes provide structural rigidity and do not need to be reinforced with screws. The dimensions of the cutouts are given for a pine board with a thickness of 18 mm, when using a different material, calculate the cutouts yourself.

Make two sides

Mark a sidewall with rounded cutouts on a wooden shield, cut the workpiece with a jigsaw and grind the edges with a grinder. Make the second part using the first as a template.

Mark on internal surfaces sidewalls the location of the grooves, which should be 1 mm wider than the corresponding ridges on the horizontal parts. Select recesses with a slotted disc or cutter.

Take a round blank for the crossbar with an allowance of 2–3 cm in length and sand its surface. Measure the diameter of the stick and pick up a slightly larger feather drill. Mark the drilling centers on the sidewalls and make holes: on the left workpiece up to half the thickness of the material, and on the right - a through hole.

Assemble the holder parts together

Lubricate the grooves and ridges of the blanks with glue and assemble the structure. Pull the blanks with clamps and wait for the adhesive to dry completely. Then fix the handle on the left sidewall with a countersunk screw, screwing it into the bottom of the blind hole.

Recess in the left sidewall - the head of the screw protrudes slightly above the surface

Make a blind hole in the right handle for the size of a round stick, limiting the drilling depth to 15 mm. Fasten the parts with wood glue.

Round stick-crossbar is glued into the right handle

Insert the crossbar into the holder until it stops and determine the length of the stick, taking into account that the magnet subsequently placed from the end should protrude slightly from the surface. Saw off excess wood, select a recess for the magnet and secure it with all-purpose glue.

Cover the wood with stain or varnish. After drying, fasten the holder with short screws to the bottom panel of the kitchen cabinet, and hang the roll of paper towels in place.

Our homemade product can also be mounted on the wall through the furniture corners installed inside the shelves. In this case, the top panel turns into additional storage space.