The history of the creation of a device for obtaining live and dead water originates from the late 70s. From the very moment when one of the inventors of the innovators decided to experiment with the healing of a festering wound. The choice was not rich in the Vishnevsky ointment, which was treated for an inflamed wound for several weeks, but it did not help. Or try using activated catholyte and anolyte solutions (dead and living water). And no matter how strange it sounds now and resembles a fairy tale, it helped. Self-hypnosis or actually water had anti-inflammatory properties. Word of mouth news spread almost instantly. And already in the 80s, methods of treating various diseases appeared. She became especially popular after being published in the magazine Young Technician in 1983.

But our industry has not kept pace with progress. I didn’t want to say so, or I couldn’t put into production devices for activating water. As a result, tens of thousands of engineers, turners, electricians, locksmiths, specialists in the radio-electronic industry did it for the state. Fortunately, the factories lacked the necessary material. And if it was not possible to find something at this plant, an exchange in kind took place, and in the exceptional case, “half a liter currency”. For her priceless, you could get anything. As a result, parents actively used the device. Many diseases were treated according to rewritten methods. Well, the children were left to observe the process, in which, of course, they did not understand anything. Years have passed. The children have matured and already they began to show sores that were once treated by their parents in the distant 80s. And why not try living and dead water.

The Internet has appeared.

Treatment methods can be downloaded from many sites. There are many different devices for obtaining living and dead water. The price starts from 1500 rubles.

But there are copies much more expensive. In them, in addition to the activator itself, a silvering agent and a water filter are installed. Why is not clear! After all, some device that expensive devices use is sure to be in our apartment. Everything now depends not on the bottle, but on the thickness of the wallets. Well, if there is no money, but there is a desire, and the hands are in place. It doesn’t matter that you can assemble a device for obtaining living and dead water with your own hands.

DIY activator

For this you need:

1. Dielectric plate size 150*150 mm.
2. High power diode type D231 or D232 or their foreign analogue-1 PC.
3. Wire with a socket 1.0-1.5 m long.
4. Liter jar 1 pc.
5. Piece of tarpaulin 160*120 mm
6. Two strips of food grade stainless steel AISI 304 and AISI 316 capable of resisting corrosion and acids, size 180*40 mm.
7. Two bolts with nuts 6 mm.

We drill three holes with a diameter of 6 mm in the dielectric plate. As shown in Figure 2. The distance between the two holes in the middle is 60mm. The end hole is used to fix the power cord and should be at a distance of 10 * 10 mm from the edge. Where doesn't matter.

We take a plate of food grade stainless steel. We mark a hole of 20 mm along the width of the plate and 10 mm along the length of the plate. We drill a hole with a diameter of 6mm. We retreat 20 mm along the length of the plate and bend it at an angle of 90 degrees. We do the same with the second plate.

Using bolts, we fasten the steel blanks to the dielectric plate. We attach a diode to one. We pass the wire through the hole on the edge and solder one end of the wire to the other end of the diode, and the other end to the other plate. All exposed parts are well insulated. You can use electrical tape.

Gently a little more than the width of the strip of steel, we sew from a piece of tarpaulin, a bag. Pour water into the jar on one of the plates, with the diodes connected, put on the bag. We lower the device with plates in a jar. The device is ready for use, see Figure 1. To obtain activated solutions, plug into the socket and wait from 3-10 minutes. For more information about the methods of treatment of various diseases, you can read

Well, if family budget allows you to spend a small amount of money, then it’s better not to start, buy a ready-made device. For example, an inexpensive device for obtaining catholyte and anolyte, or Living and Dead Water GAIN, details HERE. The turpentine device differs from other analogs: the price, the shutdown timer, and disconnection from the electrical network in case of emergency opening of the lid from the water container.

However, you choose! You can search the Internet and find other devices and devices for obtaining activated water. Now there are quite a lot of them on the market. It all depends on your desire and possibilities.

(Note: about the device itself, which makes living and dead water, read here - Electric water activator (filter) "Zhiva-5" (5.5 liters). Activator of "Live" and "Dead" water )

The following description is divided into two parts below. The first part presents our own experience, as well as the experience of our friends and clients who were happy to share their results of using activated water. The second part contains well-known recommendations, which are numerously presented on the Internet on sites dedicated to the use of activated water.

Remember the main thing: “dead” water is a bactericide = disinfectant, “living” water is an energy drink. After applying "dead" water, whether inside or on the skin, always after 15-30 minutes you need to apply "live" water. We decontaminate the “dead”, “Alive” we give energy for regeneration!

To all the following recommendations, apply the following rule: Drink water only before meals for 20-30 minutes. or in the interval between meals, you should never drink any liquid at all after eating for 2 hours, as dilution of gastric juice occurs, the concentration of acidity drops, digestion stops, undigested food enters the intestines and begins to rot. This is one of the main causes of acidification and aging of the body. If you are thirsty after a meal, this means that you need to drink water before meals, preferably 20-30 minutes before. before eating, drink "live" or plain water (not "dead"), then the body does not want to drink after.

"Dead" water suitable for treatment should taste noticeably sour. If before activation add to average capacity for dead water 1/4-1/3 - a teaspoon of salt without a slide, then the properties of "dead" water will increase.

(Clicking on a photo will enlarge it.)

Slagging of the intercellular space is the main cause of all diseases and aging of the body. In order for more toxins to be removed from the body than it enters, a person needs to drink 30 milliliters of water per 1 kg per day. weight. That is, for example, if you weigh 70 kg, 70 * 0.03 l \u003d 2.1 liters of water per day. Well, if you drink "living" water, then the cleansing of the body is faster. Since “living” water is a powerful antioxidant, if you start drinking “living” water for the first time and the intercellular space of your body is heavily slagged, then since “living” water causes intensive washing out of toxins, the body may not have time to remove them through the urinary system. As a result, partially washed out toxins can temporarily accumulate in those places of the body where there is a high degree of slagging, most often in the legs, and pain in the joints may appear. In such cases, it is recommended to temporarily stop drinking "living" water. It is necessary to pause for 2-3 days or more in especially severe cases. The process of purification must be treated with understanding and patience. For example, water can be activated a day before consumption, so the charge will expire and the water will simply be purified, and without antioxidant properties. When the body is cleansed, "Living" water can be drunk daily.

Our experience of using "Living" and "Dead" water

Colds, flu, etc.:

Drink 50-100 grams of dead water 3-4 times a day. Drink 200-300 grams of living water 15-20 minutes after the dead water.

Runny nose:

Before activation, add 1/4-1/3 - a teaspoon of salt without a slide to the middle tank for dead water.

Rinse the nose, throat, mouth cavity with heated "dead" (warm) water.

With a cotton swab moistened with dead water, drip into the nose, so that, as it were, the nose sucks in more water. If you instill with a pipette, then you need to instill not a few drops, but so as to moisten the nasopharynx well.

Drink dead water 3-4 times a day, 50-100 gr. 15-20 minutes after dead water, drink live water 200-300 gr. The usual runny nose goes away in one or two doses.

Burns:

Carefully treat the burned area with "dead" water. After 4-5 minutes, moisten them with "living" water and then continue to moisten only with it. Try not to burst bubbles. If the blisters nevertheless burst or pus appeared, start the treatment with "dead" water, then - "live". Burns heal and heal in 3-5 days.

Cuts, abrasions, scratches,open wounds:

Rinse the wound with "dead" water. Then apply a tampon soaked in "living" water to it and bandage it. Treatment to continue already "live" water. When pus appears, treat the wound again with "dead" water. Wounds are tightened within 2-3 days.

Stones in the kidneys:

In the morning, drink 50-70 gr. "dead" water, after 20-30 minutes drink "Living" water, 150-250 gr. Then, during the day, drink "living" water 3-4 times a day, 150-250 gr. Stones gradually dissolve.

Pain in the joints of the arms and legs, salt deposits.

2-3 days, 3 times a day 30 minutes before meals, drink 50-70 gr. "dead" water, after 15 minutes drink "Living" water 100-250 gr., "dead" water to make compresses on sore spots 3-4 times a day. Heat water for compresses to 40-45 degrees. Celsius. Usually, relief is felt immediately after the compress. Pressure decreases, sleep improves, the state of the nervous system normalizes.

Indigestion, diarrhea, dysentery:

On this day, it is better not to eat anything. During the day, drink 50-100g 3-4 times. "dead" water.

For a stronger effect of "Dead Water" before activation, add to the middle container, for dead water, 1/4-1/3 - a teaspoon of salt without a slide. Often, the disorder resolves within 10 minutes. after acceptance.

Dysentery passes during the day.

Gastritis, gastric and duodenal ulcer:

Before meals 30 min. drink 50-70 gr. "Dead" water, then after 10-15 minutes drink 200-300 gr. "Living" water. Pain in the stomach disappears, appetite and general well-being improve.

Heartburn:

Before eating, drink 100-200 gr. "living" water. Heartburn goes away.

Hair care:

After shampooing, moisten the hair with "dead" water, wait 2-5 minutes.

Wash off with "living" water. If not wiping, let dry, the effect will be brighter. Dandruff disappears, hair becomes soft and silky.

Conjunctivitis, barley:

2-3 times a day, lubricate the barley with a cotton swab dipped in "dead" water!

High blood pressure:

Morning and evening, before meals, drink 50-100 gr. "dead" water. The pressure normalizes, the nervous system calms down.

Low pressure:

In the morning and evening, before meals, drink 150-250 gr. "living" water. The pressure normalizes, there is a surge of strength.

Rejuvenating treatments:

A strong effect of skin rejuvenation and smoothing of wrinkles was shown by daily washing procedures with “dead” and “living” water. 2-3 times a day, wash your face first with "dead" water, prepared with the addition of 2-4 pinches of salt to an average container, do not wipe your face, let it dry. After washing your face with "living" water and also let it dry.

The effect is noticeable within a few days in people leading a healthy lifestyle and diet.

Experience in the use of "Living" and "Dead" water from open sources

Prostate adenoma:

The entire treatment cycle is 8 days. 1 hour before meals, 4 times a day, drink 100g. "living" water, (fourth time - at night). If the blood pressure is normal, then by the end of the treatment cycle, you can drink 200 gr. Sometimes a second course of treatment is needed. It is carried out a month after the first cycle, but it is better to continue treatment without interruption. In the process of treatment, it is useful to massage the perineum, put a compress on the perineum at night with “living” water, after wetting that place with “dead” water. Enemas from warm "living" water are also desirable. Cycling, jogging, and candles from a bandage moistened with "living" water are also useful. The pain disappears in 4-5 days, the swelling and the urge to urinate decrease. Small red particles can come out with the urine. Improves digestion, appetite.

Allergy:

For three days in a row, after eating, rinse your mouth, throat and nose with "dead" water. After each rinse, after 10 minutes, drink 100-200g. "living" water. Rashes on the skin (if any) moisten with "dead" water. The illness usually goes away in 2-3 days. The procedure is recommended to be repeated for prevention.

Angina and catarrh of the upper respiratory tract, acute respiratory infections:

For three days, 6-7 times a day, rinse your mouth, throat and nose with heated "dead" water after eating. In 10 minutes. after each rinse drink 100-200g. "living" water. The temperature drops on the first day. The illness itself resolves in 3 days or less.

Bronchial asthma, bronchitis.

For three days, 4-5 times a day, after eating, rinse your mouth, throat and nose with heated "dead" water. In 10 minutes. after each rinse drink 100-200g. "living" water. If there is no noticeable improvement, do an inhalation with "dead" water: heat 1 liter of water to 70-80 ° C and breathe in its steam for 10 minutes. Repeat 3-4 times a day. The last inhalation can be done with "live" water and soda. Decreased urge to cough, improves general well-being. If necessary, repeat the course of treatment.

Inflammation of the liver:

Treatment cycle - 4 days. On the first day, 4 times before meals, drink 50-100g. "dead" water. On other days, drink "living" water in a similar mode. The pain passes, the inflammatory process stops.

Inflammation of the colon (colitis):

On the first day, it is better not to eat anything. During the day, drink 50-100g 3-4 times. "dead" water "fortress" at 2.0 pH. The illness resolves within 2 days.

Hemorrhoids, anal fissures:

Before starting treatment, visit the toilet, gently wash the anus, tears, knots with warm water and soap, wipe dry and moisten with "dead" water. After 7-8 minutes, make lotions with a cotton-gauze swab dipped in "living" water. This procedure, changing tampons, repeat during the day 6-8 times. At night, drink 100g. "living" water.

During the treatment period, avoid eating spicy and fried foods, it is advisable to eat easily digestible foods, such as cereals and boiled potatoes. Bleeding stops, ulcers heal within 3-4 days.

Herpes (colds): Before treatment, thoroughly rinse the mouth and nose with "dead" water and drink 50-100g. "dead" water. Remove the vial with the contents of herpes with a cotton swab moistened with heated "dead" water. Further, during the day, 7-8 times for 3-4 minutes, apply a swab moistened with "dead" water to the affected area. On the second day, drink 50-100g. "dead" water, repeat rinsing. Apply a swab dipped in "dead" water to the formed crust 3-4 times a day. Burning and itching stop within 2-3 hours. Herpes goes away within 2-3 days.

Worms (helminthiasis):

Make cleansing enemas, first - "dead" water, and an hour later - "living" water. During the day, drink every hour for 50-100g. "dead" water. The next day to restore health, drink 100-200g. "live" water half an hour before meals. Feeling may be unimportant. If after 2 days recovery has not occurred, then repeat the procedure.

Purulent wounds, fistulas, postoperative wounds, bedsores, trophic ulcers, abscesses:

Rinse the affected areas with warm "dead" water and allow to dry without wiping. Then, after 5-6 minutes, moisten the wounds with warm "living" water. Repeat this procedure only with "living" water during the day at least 5-6 times. If the pus continues to be released again, then it is necessary to treat the wounds again with "dead" water, and then, until healing, apply tampons with "live" water. When treating bedsores, the patient is recommended to be laid on a linen sheet. Wounds are cleaned, dry, their rapid healing begins, usually within 4-5 days they are completely tightened. Trophic ulcers heal longer.

Headache:

If the head hurts from a bruise, concussion, then moisten it with "living" water. With an ordinary headache, moisten the aching part of the head with "live" water and drink 50-100 gr. "dead" water. For most people, the headache stops within 40-50 minutes.

Fungus:

Wash affected areas thoroughly first. hot water with laundry soap, wipe dry and moisten with "dead" water. During the day, moisten with "dead" water 5-6 times and let dry without wiping. Wash socks and towels and soak in "dead" water. Similarly (you can once) disinfect shoes - pour "dead" water into it and hold for 20 minutes. The fungus disappears within 4-5 days. Sometimes the procedure needs to be repeated.

Foot odor

Wash your feet with warm water and soap, wipe dry and moisten with "dead" water. Let dry without wiping. After 8-10 minutes, moisten the feet with "living" water and, without wiping, let dry. Repeat the procedure for 2-3 days. Additionally, you can treat socks and shoes with "dead" water. Bad smell disappears.

Diathesis:

Moisten all rashes, swellings with "dead" water and let dry. Then make compresses with "live" water for 10-15 minutes. Repeat the procedure 3-4 times a day. Affected areas heal in 2-3 days.

Jaundice (hepatitis):

3-4 days, 4-5 times a day, 30 minutes before meals, drink 100-200g. "living" water. After 5-6 days, see a doctor. If necessary, continue treatment. Feeling better, appetite appears, the natural complexion is restored.

Constipation: Drink 100-150g. "living" water. You can make an enema from warm "living" water. The constipation goes away.

Toothache. Periodontitis:

Rinse your teeth after eating with warm "dead" water for 15-20 minutes. When brushing your teeth, use instead of ordinary water - "live". If there are stones on the teeth, brush your teeth with "dead" water and after 10 minutes rinse your mouth with "live" water. With periodontal disease, rinse your mouth after eating with "dead" water several times. Then rinse your mouth "live". Brush your teeth only in the evening. Do the procedure regularly. The pain usually goes away quickly. Gradually, tartar disappears and gum bleeding decreases. Periodontitis gradually disappears.

Colpitis (vaginitis), cervical erosion:

Heat activated water to 30-40 degrees Celsius and douche at night: first with "dead" and after 8-10 minutes - with "live" water. Continue 2-3 days. The illness goes away within 2-3 days.

Swelling of hands and feet:

Three days 4 times a day 30-40 minutes before meals and drink at night:

On the first day, 50-70g. "dead" water;

On the second day - 100g. "dead" water;

On the third day - 100-200 grams of "living" water.

Edema decreases and gradually disappears.

Polyarthritis, arthritis, osteochondrosis:

Full cycle of treatment - 9 days. Drink 3 times a day 30-40 minutes before meals:

In the first three days and 7, 8, 9 days, 50-100g. "dead" water;

4th day - break;

5th day - 100-150g. "living" water;

6th day - break.

If necessary, this cycle can be repeated after a week. If the disease is running, then you need to apply compresses with warm "dead" water to the sore spots. Joint pain disappears, sleep and well-being improve.

Neck cold:

Make a compress on the neck from the heated "dead" water. In addition, 4 times a day, before meals and at night, drink 100-150g. "living" water. The pain disappears, freedom of movement is restored, well-being improves.

Prevention of insomnia, increased irritability:

At night, drink 50-70g. "dead" water. Within 2 - 3 days, 30-40 minutes before meals, continue to drink "dead" water in the same dosage. Avoid spicy, fatty and meat foods during this period. Sleep improves, irritability decreases.

Prevention of acute respiratory infections, colds during epidemics:

Periodically, 3-4 times a week in the morning and in the evening, rinse the nose, throat and mouth with "dead" water. After 20-30 minutes, drink 100-200g. "living" water. In case of contact with an infectious patient, perform the above procedure additionally. It is advisable to wash your hands with "dead" water. Vigor appears, efficiency increases, general well-being improves.

Psoriasis, psoriasis:

One cycle of treatment - 6 days. Before treatment, wash thoroughly with soap, steam the affected areas, with the maximum tolerable temperature, or make a hot compress. Then, moisten the affected areas abundantly with heated "dead" water, and after 8-10 minutes begin to moisten with "living" water. Further, the entire treatment cycle (i.e., all 6 days) should be moistened 5-8 times a day with only “living” water, without preliminary washing, steaming and treatment with “dead” water. In addition, in the first three days of treatment, you need to drink 50-100g before meals. "dead" food, and 4, 5 and 6 days - 100-200g each. "alive". After the first cycle of treatment, a week break is taken, and then the cycle is repeated several times until recovery. If during the treatment the skin dries out a lot, cracks and hurts, then you can moisten it several times with "dead" water. At 4-5 days of treatment, the affected areas of the skin begin to clear, clear pinkish areas of the skin appear. Gradually, the lichen disappears completely. Usually 3-5 treatment cycles are enough. You should avoid smoking, drinking alcohol, spicy and smoked foods, try not to be nervous.

Radiculitis, rheumatism:

Two days, 3 times a day, half an hour before meals, drink 150-200g. "living" water. Rub heated "dead" water into sore spots. The pain disappears within a day, some earlier, depending on the cause of the exacerbation.

Skin irritation (after shaving):

Moisten the skin several times with "living" water and let it dry without wiping. If there are cuts, apply a swab with "live" water to them for 5-7 minutes. A little sore skin, but heals quickly.

Vein expansion:

Places of expansion of veins and bleeding places should be washed with "dead" water, then apply compresses with "live" water for 15-20 minutes and drink 50-100g. "dead" water. The procedure is recommended to be repeated. Pain dulls. Over time, the disease goes away.

Diabetes mellitus, pancreas:

Constantly half an hour before meals drink 100-200g. "living" water. Useful massage of the gland and self-hypnosis that it releases insulin. The condition is improving.

Stomatitis:

After each meal, and additionally 3-4 times a day, rinse your mouth with "live" water for 2-3 minutes. The sores heal within 1-2 days.

Removal of dead skin from the feet:

Steam your feet in hot soapy water for 35-40 minutes and rinse with warm water. After that, moisten your feet with warm "dead" water and after 15-20 minutes carefully remove the layer of dead skin. Then wash your feet with warm "living" water and let dry without wiping. This procedure must be repeated periodically. "Dead" skin gradually exfoliates. The skin of the feet softens, the cracks heal.

Acne, increased peeling of the skin, acne on the face:

In the morning and in the evening, after washing, 2-3 times with 1-2 minute intervals, wash the face and neck with "living" water and let dry without wiping. Make compresses on wrinkled skin for 15-20 minutes. In this case, the "living" water should be slightly warmed up. If the skin is dry, then first it must be washed with "dead" water. After 8-10 minutes, do the above procedures. Once a week, you need to wipe your face with this solution: 100g. "live" water, 1/2 tablespoon of salt, 1/2 teaspoon of soda. After 2 minutes, rinse your face with "live" water. The skin is smoothed, becomes softer, minor abrasions and cuts are tightened, acne disappears and peeling stops. With prolonged use, wrinkles almost disappear.

Removal of alcohol hangover syndrome.

Mix 150gr. "live" water and 50gr. "dead" . Drink slowly. Repeat this procedure after 45-60 minutes. After 2-3 hours, the state of health improves, appetite appears.

Cholecystitis (inflammation of the gallbladder):

Within 4 days, 3 times a day, 30-40 minutes before meals, drink 100g. water: 1st time - "dead", 2nd and 3rd time - "live". Pain in the region of the heart, abdomen and right shoulder blade disappear, bitterness in the mouth and nausea disappear.

Eczema, ringworm:

Before treatment, steam the affected areas, then moisten with "dead" water and allow to dry. Further, 4-5 times a day moisten only with "living" water. At night, drink 100-150g. "living" water. The course of treatment is a week. The affected areas heal within 4-5 days.

Technology for making tea, coffee and herbal extracts:
Tea and herbal extracts are prepared on "living" water, heated to 60-70°C, which is poured into tea, dry grass or dried flowers. Let it brew for 5-10 minutes - and the tea is ready. For those who have low acidity, it is recommended to add sea buckthorn, cranberry, currant or lemon jam to the tea to neutralize the alkalinity of the water. Fans of very hot tea can then heat it up to desired temperature. It is not recommended to heat water above 70°C.
This technology allows you to get the extract of tea or herbs more saturated. It contains less destroyed "living" protein cells, enzymes, vitamins and other substances than when exposed to boiling water. With conventional technology, these substances only pollute the drink, so it turns out not tea, but tea "dirt". Green tea on "live" water is obtained Brown and with the best taste.
Coffee is prepared on “live” water, heated a little more: up to 80-85 ° C (this temperature is necessary to dissolve caffeine).
Infusions from medicinal plants for medicinal purposes should be infused a little longer (in accordance with the recommendations of pharmacies or traditional healers).

Every person dreams of a long and happy life, which is not overshadowed by various ailments. And this desire has always sought to fulfill traditional medicine. She has accumulated vast experience in the study of medicinal plants and created many recipes that relieve various diseases.

One of the proposed folk medicine miraculous means is water, which is called living and dead. Remember how in fairy tales, when with the help of this means they resurrected a dead hero? First, it was sprinkled with dead water, and then with living water.

Application history

The gifts of nature have long been used by man for medicinal purposes. One of them, which deserves special attention, is “life-giving water”. Even in ancient manuscripts, researchers found a mention that during their military campaigns along the mountain ranges of the Pamirs, the Caucasus and the Tien Shan, Alexander the Great found a source of healing water. He filled the jug with liquid, but his daughter stole it and poured it on herself. As a result, she became invisible and immortal.

Information has also been preserved that many Popes, Chinese emperors and other powers that be organized expeditions in search of an elixir that would allow them to obtain immortality. All these tales and legends are a clear confirmation that our ancestors knew about the existence of living and dead water.

Sources

Today, living and dead water can be made with your own hands. And in ancient times, people took it from natural sources.

The dead was in stagnant lakes and swamps. This liquid was not taken internally. It was used only by healers for various external potions. Alive is considered the water of mountain rivers, glaciers and waterfalls. They drank it, and also used it in the preparation of various medicines.

Modern research

Today, in order to obtain a healing liquid, there is no need to look for its sources. To do this, it is enough to make an apparatus of living and dead water at home. When it is used as a result of hydrolysis, the so-called activated water is obtained.

The properties of this liquid were studied by Soviet scientists back in the 80s of the 20th century. However, the results of all experiments and experiments for the general public were simply classified. However, everything secret sooner or later becomes clear. After some time, doctors and folk healers learned about the results of the experiments. And here the work of Western researchers played an important role. Their results could be read in published scientific articles.

Studies have shown that living water, also called catholyte, becomes negatively charged due to hydrolysis. Such a transformation contributes to its high regenerative and immunostimulating properties. This makes it possible for the liquid that has undergone the process of hydrolysis to become healing and be used to get rid of many ailments.

The unique properties of such water were confirmed by the Pharmacological Committee of the USSR. At the same time, it was said about its absolute harmlessness not only for external, but also for internal use.

The water accumulated after electrolysis near the positive electrode is called anolyte. Her unique properties were known to folk healers from time immemorial. Thanks to this water, people managed to escape from rotting wounds and bedsores.

Getting healing liquid

In order to get activated water, you do not need to look for some distant and sometimes inaccessible sources. To do this, just open the tap and use a special device.

Based on the basic concepts of chemistry, living water has alkaline properties. They also contribute to the healing effect. The properties of dead water are acidic. That is why it exhibits a disinfecting effect.

An electric current passing through ordinary water radically changes its internal structure. At the same time, it erases harmful environmental information in the liquid. After such treatment, water is divided into living and dead. Moreover, each of these two fractions has medicinal qualities.

Experiments on the use of activated liquid

The first apparatus of living and dead water in our country was invented by N. M. Kratov. The idea of ​​creating this device came to the author not by chance. In 1981, Kratov was treated in the hospital. There he was diagnosed with prostate adenoma. Simultaneously with this pathology, he suffered from inflammatory process in the kidneys. The course of treatment in the hospital lasted for a month, but did not bring tangible results. That is why the doctors offered Kratov an operation. He refused surgery and was discharged home.

At the same time, Kratov's son suffered from a long-term non-healing wound. And the author, who created the apparatus of living and dead water, began to test the properties of the healing liquid on the affected area on the son's skin. The results were not long in coming. The wound healed over two days. Such success inspired the inventor. He began to take such water himself, and soon improved his health. Together with the adenoma, sciatica and swelling of the legs left him.

Application area

Beyond Kratov healing properties and such water was studied by G.D. Lysenko, and also whole line authors. As a result of the research, it became obvious that water, both living and dead, can save a person from almost fifty different diseases, from sore throat to gastric and duodenal ulcers.

This list also includes such common diseases as colds and flu, runny nose and sciatica, hypertension, etc.

Making at home

In order to use the healing liquid, it is enough to make an apparatus of living and dead water with your own hands. Of course, such devices are easy to find on sale. Buying and delivering them is not difficult.

However, the acquired apparatus for obtaining living and dead water, when examined in detail, has quite simple design. This suggests saving money. After all, the price of such a device is not so small. It is much easier to make an apparatus of living and dead water with your own hands. It will only take a little time and a small amount of materials. The skill of our masters is always present.

Main details

In order to build an apparatus of living and dead water with your own hands, you will need:

Glass jar;
- diode bridge rectifying mains voltage;
- a pouch made of waterproof fabric;
- two electrodes;
- network cord.

With help skillful hands all these details can easily be turned into homemade apparatus living and dead water.

electrodes

This part must be made of food grade stainless steel. Salad bowls that have remained in the house since Soviet times are great for this role. But if they are not, then any dishes made from stainless steel will do. A graphite rod can be used for the anode.

If the apparatus for preparing live and dead water is assembled using a half-liter jar, then the length of the electrodes should be 100 mm. However, this volume can be increased. A jar in order to create an apparatus of living and dead water with your own hands, you can take a three-liter one. In any case, the electrodes can be extended. Their size should be such that the distance between the metal and the bottom of the glass container is at least 5-10 mm.

Sheets of stainless steel suitable for the manufacture of the anode and cathode should be 0.8-1 mm thick. Some craftsmen claim that the apparatus for making living and dead water was created by them using aluminum electrodes.

Pouch

This detail will be needed to separate the resulting water fractions. As a rule, a tarpaulin is taken to make a bag. It can be a piece from a fire hose or a gas mask bag. But in any case, the material for the bag should not contain any impregnations. In order to make sure that there are no foreign substances, the cooked piece must be placed in water and boiled. The components used in the impregnation will reveal themselves when heated.

The length of the finished bag should be in full accordance with the height of the glass jar that is used to create the apparatus. When cutting this part, cut off the required length of the tarpaulin. The bottom of the bag is sewn up with a piece of the same material or food plastic is inserted.

Instrument assembly

The scheme of the apparatus that receives living and dead water is quite simple, and you can familiarize yourself with it in the article. To assemble the device, a U-shaped cut is made on the positive electrode. It is necessary for placing a cloth bag on the anode. It will collect dead water. On the cathode, such a cut is not necessary.

Both electrodes are attached to the jar using an ordinary nylon lid. However, there is one trick to be applied here. Due to the fact that such covers have little mechanical strength, it is best to attach the electrodes to them using an insulating sealing gasket. This will avoid the unpredictability of their behavior in the process. Such gaskets are made of fiberglass (without foil) or any plastic. This part has the form of a rectangle with rounded ends. Two holes are cut out on it, the diameter of which coincides with the diameter of the electrodes. The gasket is installed on plastic cover. During operation, when living water and dead water are formed, the device emits gases from the liquid. For their exit, an additional hole is provided in the lid.

Next, a rectifier diode bridge is attached to the electrodes. In this case, it is important to mark the positive and negative outputs to the plate (“+” and “-”). For safety, the bridge can be covered with a lid. When using a diode with threaded fastening the thread must be attached to the positive electrode.

There is another way to assemble such a circuit. It can be done with a rectifier bridge. In this case, living and dead water will be produced even more intensively. The device (reviews from craftsmen confirm this) will become four times more powerful. Accelerating the process of preparing a healing liquid is especially important with its systematic use.

A power cord with a plug is connected to the diode bridge. Its length should be at least 500-700 mm. At the same time, it is important to isolate all open electrical connections, because for the process, which results in living water and dead water, the device consumes an alternating voltage of 220 V. Next, the electrode, which is marked with a minus sign, is placed in a canvas bag, poured into a jar water, and the whole structure starts working when connected to the electrical network.

Water preparation

Getting a healing liquid is quite simple. To do this, pour water into a cloth bag. Next, a positive electrode is placed in it. The whole structure is immersed in a jar of water. And there are some nuances here too. Water in a jar should not be filled to the brim. It should be slightly below the top edge of the bag.

The whole process takes no more than 5-10 minutes. Next, the electrodes are removed from the jar. This must be done very carefully. Otherwise, there will be a mixture of the two resulting fractions. At the end of the process, water from the cloth bag is poured into a separate bowl.

Assembling an instrument with a different design

Due to the need for careful handling of the obtained fractions, this device is not very convenient. In addition, certain safety precautions must be observed when the apparatus of living and dead water is operating.

The instruction to it warns that all manipulations for pouring water and removing the final product must be done without plugging the device into a power outlet.

A device that does not provide for the use of a cloth bag is considered more convenient. In this case, you will need to take two containers. However, banks are not suitable for this. Such containers are distinguished by the absence of a neck and sheer straight edges. The design of the electrodes in such a device remains unchanged. The only difference between this apparatus is that the anode and cathode must be installed in separate containers. Electrical contact must be ensured between the electrodes. To do this, they are connected with a cotton cord wrapped in gauze, which is pre-soaked in water. Such a detail will allow the ions to move freely. As a result of the operation of the device, both living and dead water will be produced. And each of them can be seen in a separate container. This allows at the end of the work to simply disconnect the installation from the network and get the anolyte and catholyte immediately, and in the same volumes.

In the scheme of this design, as in the previous version, it is desirable to use a light bulb with a power of 15 watts. They are usually used in sewing machines and refrigerators. If the electrodes are short-circuited, the light bulb will play the role of a fuse, and if the process does not have any failures, it will be an indicator. At the beginning of water production, the light from it will be bright enough. Toward the end of the process, the light will begin to dim. The signal of the end of the production of activated water will be its complete shutdown.

Rules for the use of healing water

The catholyte prepared in the device is an alkaline solution with a bluish tint. It is a clear soft liquid with an alkaline taste with a pH of 8.5 to 10.5. Catholyte, or living water, is able to retain its medicinal properties at least two days. Only in this case it is important that the storage conditions are observed. living water should be in a closed container and in a darkened room.

The analyte has a yellowish tint. In addition, the difference between dead water and living water lies in its astringent sour taste and somewhat acidic aroma. The anolyte retains its properties for half a month. But this only happens when it is stored in a closed container. The acidity of such a liquid is from 2.5 to 3.5 pH.

Before use, activated water should be heated. However, some caution must be exercised in doing so. Water should be poured into ceramic or enameled dishes and heated over low heat. The use of the electric stove will cause the loss of it. useful properties. It is strictly forbidden to bring such water to a boil. In this case, it also becomes useless.

If both dead and living water are used at the same time, then between their receptions you need to take a break of at least one and a half hours. In the case of topical application, the pause is much shorter. It is only 10 minutes. Such a scheme of administration can be explained by the fact that when the analyte and catholyte are mixed, they are neutralized. As a result, the healing liquid simply loses its activity.

We all grew up with fairy tales, but even now, as adults, many of us want fairy tales to become reality. And it turns out that in some cases such a development of events is quite possible, for example, when it comes to living and dead water. Long-term studies have shown that such a liquid really exists and it is not so difficult to create it. You just need to stock up on a special device that performs electrolysis. Let's try to talk about how to make living and dead water at home?

The main features of dead and living water

So, dead water is an anolyte, a solution that is obtained with the help of an anode as a result of electrolysis. Such a liquid is characterized by an increased acid content, the presence of disinfecting, bactericidal, antifungal, antibacterial, antihistamine and anti-inflammatory qualities. Suitable mainly for topical use.

Living water is also called a catholyte, its solution is obtained using a cathode in the same electrolysis. This liquid is alkaline, it remarkably activates the immune system, improves the general condition, plays the role of the strongest antioxidant, normalizes blood pressure, improves metabolic processes, etc. It can be used for systematic internal consumption.

How to make living water and dead water at home?

Today on the market you can find several devices for creating living and dead water of domestic and foreign production.

Silver-activator Iva-2Silver

This device is made in Russia. Manufacturers claim that it has a number of advantages, namely the presence of a silver rod of the highest standard. This device allows not only to activate ordinary tap water, creating anolyte and catholyte from it, but also to produce high-quality silver water suitable for drinking. In addition, the Iva-2Silver device is made using a special Aquatension System proprietary technology that allows you to increase the digestibility of water by an order of magnitude by changing its surface tension. Also due to the presence of a new electrode protection, the service life of the device has increased by an order of magnitude (compared to the previous model Iva-1). Iva-2Silver also has a built-in timer that will help readers of Popular about Health get activated water even easier.

A significant disadvantage of this device is its cost, which starts from 5,000 rubles. However, if you wish, you can purchase a more budget device Iva-1, which does not produce silver water, but can make living water and dead water. The cost of Willow-1 is approximately 4,000 rubles.

Melesta

This is perhaps the most budgetary water activator, which is manufactured in Belarus. Manufacturers claim that its use allows you to get living and dead water quite quickly and of high quality. But such a device has a number of disadvantages.

Firstly, dead water in such a device is formed in a fabric glass, which plays the role of a diaphragm. Secondly, this device has only two electrodes, which are made of food grade steel. In addition, Melesta looks rather clumsy, although on the function appearance and has no effect. There is a significant drawback - the lack of a timer.
Although at a cost such a device wins a lot - it will cost you about 1200 rubles.

Apparatus AP-1

This is one of the most popular water activators manufactured in Belarus. Such a product is characterized by a high level of quality, the manufacturer claims that it is made from top-class food grade plastic. The electrodes of the device are made of especially durable favorable metals, and the ceramic glass is made of a high grade of clay. The AP-1 device has a nice appearance, it allows you to get about one and a half liters of water in just twenty to thirty minutes. Such a device consumes little electricity - like a forty-watt light bulb. Another plus of the AP-1 apparatus is that its anodes are made of titanium, and their surface is coated with a platinum group metal. As for the cathodes, they are made of stainless steel.
However, the cost of such a device is quite high - about three thousand rubles.

This device is mainly popular among professionals, it is used for sanatoriums, rest houses and medical institutions.

However, PTV can be used at home as well. Such a device is characterized by high quality, compliance with all electrical safety requirements, and a certificate of conformity. There is no lead in the device itself, the electrodes are made of high quality materials (food grade stainless steel and titanium). With the help of the PTV device, you can literally get one liter and four hundred milliliters of activated water in twenty-five to thirty minutes.

One of the main disadvantages of the product is a rather high cost - about 5,000 rubles.

Do it yourself

Many craftsmen are trying to create a water activator on their own. To do this, you need to use a pair of stainless steel mugs, several syringes, a wire (cord with a plug), as well as one diode.

Drill a hole in one of the mugs, screw a diode into it (6A under a load of 220W). Fix both mugs on a stand made of non-conductive material. Glue better. Connect the U-shaped tube from two syringes by cutting their tops.

Insert another syringe into the upper part of this design (in the middle of the "P"). Fill the mugs with water, place them on the base. Lower the construction of syringes into them so that one edge of the letter “P” falls into one mug, and the second into another.

Malakhov Gennady Petrovich

Man is for the world
The world is for man

"Living" and "dead" water.

In this article, we will talk about Living and Dead water how to get, prepare such water, what it is, how to use it and what it is for, what results to expect from treatment.

I receive a lot of letters on this topic with a lot of questions, let's start in order.

• Can it be used on your system "living" and "dead" water produced by electrolysis?
• What Living and Dead Water how to cook it?
• Where can I buy or how to assemble device for the preparation of living and dead water?
• How safe?
• What diseases are susceptible treatment with Living and Dead water what results to expect?
  

In the 80s of the last century, leading scientific institutes and medical clinics became interested in activated water. Soviet Union. True, most of the studies were not advertised. But information leaked into society and interested people - healers and doctors - learned about it. Moreover, scientific work abroad was carried out openly, and their results were published even in the press accessible behind the Iron Curtain, that is, in our homeland.

Official science has recognized that water that has received a negative redox potential during electrolysis, that is, living water, has high immunostimulating, regenerating and detoxifying properties, that is, meaning that it can be successfully used to treat many diseases. These unique properties of the catholyte were confirmed by the Pharmacological Committee of the USSR (Decision No. 211-252/791).

What about dead water? Its characteristics were also not questioned, because the anolyte solution, thanks to its antibacterial activity, has already saved hundreds of people from rotting wounds and bedsores.

It is difficult to determine which of the activated water solutions is more important for human health, because both catholyte and anolyte are like two halves of a single whole - a medicine created by nature itself. But nature never makes mistakes, it only offers its help to man. To be able to use this help is the task of each of you. And I will only talk about the many years of experience that people have gained in search of truth, because people need proof. Well, here they are.

Obtaining "Living" and "dead" water takes place by electrolysis. "Living" water has pronounced alkaline, healing properties, and "dead water"- acidic, disinfectant properties. I think that passing an electric current through water also changes its internal structure, erasing harmful environmental information. As a result of processing electric shock water acquires healing properties. Depending on the disease, the stage of its development, alkaline - “living” or acidic - “dead” water is used.

Activated water quickly and effectively treats many diseases, without any "chemistry". It is used in the household, at home, in the garden and in the garden, for hygiene purposes, in animal husbandry and poultry farming, etc.

The effectiveness of activated water increases also because in the process of electrolysis "dead" water becomes positive and "living" water- negative electric potential. It becomes, as it were, a weak electrolyte, which quickly interacts with body fluids (gastric juice, blood, lymph, intercellular fluid, etc.).

The human body is an energy system. The long-term practice of using activated water confirmed the conclusions of scientists that it is the positive and negative charges of this water that greatly contribute to maintaining the energy balance of cells.

Activated water is used in Japan, Austria, Germany, Poland, India, Israel, CIS countries. This water is absolutely not dangerous for either external or internal use. This was confirmed back in 1988 by the Pharmacological Committee of the USSR (DESOLUTION Mo. 211-252 * / 791).

As an example, I will give several ways to use it.

At the beginning of 1981, the author of the device (Kratov) for preparation of "live" and dead water, fell ill with inflammation of the kidneys and prostate adenoma. In the hospital, he was treated for more than a month and ... they suggested that he undergo an operation for an adenoma. He refused the "offer" and was discharged.

The first test received "Living and Dead" water the author of the device spent more than 6 months on a wound on his son's arm that did not heal.

The test of treatment performed exceeded all expectations: the wound on the son's arm healed on the second day. Then the author of the device himself began to drink "living" water 0.5 cups before meals 3 times a day and felt cheerful. The adenoma disappeared within a week, as did the sciatica and swelling of the legs.

To check the effectiveness of the treatment done, the author of the device, after a week of taking "living" water, underwent an examination in the clinic with all the tests, in which not a single disease was detected. In addition, blood pressure returned to normal.

The boy's gums festered for 6 months, an abscess formed in his throat. Application various ways treatment did not give the desired result. For treatment, the author of the device recommended rinsing the throat and gums with “dead” water 6 times a day (i.e., disinfecting), and then taking a glass of “living” water inside. The result is a complete recovery within 3 days.

This water can be used with great success in various cleansing procedures - enemas, "Shell Gesture", mouthwash, and for women and vaginas.

dead water

So, dead water, or anolyte, is an acidic solution and has strong bactericidal properties. It looks like a colorless liquid with an acid smell, but it tastes sour and slightly astringent. Its acidity is from 2.5 to 3.5 5 mV.

Insofar as dead water has bactericidal properties, it is an excellent disinfectant. dead water It is successfully used for disinfection of linen, utensils, bandages and other medical materials, as well as rooms. This water can be used to treat the room where the patient is located in order to prevent re-infection and infection of relatives, dead water is used to treat bed linen and beds if insects - fleas, bugs - are bred in the house. And for health, dead water is an unsurpassed remedy for colds. It is used for diseases of the throat, nose, ears. Gargling is a means of treating and preventing influenza and acute respiratory infections.

But these functions use of dead water is not limited. With its help, they lower blood pressure, calm the nerves, get rid of insomnia, reduce pain in the joints of the arms and legs, destroy the fungus, treat stomatitis, and dissolve stones in the bladder.

dead waterretains its properties for quite a long time - within 1-2 weeks of weeks when stored in closed vessels.

Living water.

living water, or catholyte, is an alkaline solution and has strong qualities biostimulator. This water tastes slightly alkaline, but is as colorless as anolyte. The acidity of living water ranges from 8.5 to 10.5 5 mV.

Insofar as living water is a natural biostimulator, it perfectly restores the body's immune system, provides antioxidant protection to the body, especially in combination with the use of vitamins, and is a source of vital energy.

living wateractivates all the biological processes of the body, increases blood pressure, improves appetite, metabolism, improves overall well-being.

It quickly heals various wounds, including stomach and duodenal ulcers, bedsores, trophic ulcers, burns. This water softens the skin, gradually smoothes wrinkles, destroys dandruff, improves hair structure.

Your name living water justifies everywhere. Even withered flowers come to life when placed in a vase filled with living water. AT agriculture living water - indispensable assistant. Watering with this water repeatedly increases the yield of berries and fruits. Living water can be called a double medicine, because it provides direct assistance to the body, and also enhances the effect of herbal medicines that the patient takes. By the way, the plants on the windowsill also acquire "live" strength under the influence of spraying and watering with living water.

The only disadvantage of living water is that it quickly loses its biochemical and medicinal properties, since it is an active unstable system. If stored in a closed container in a dark place, it can be used for two days. Currently, a lot of devices for the preparation of living water are being developed. The developers of these devices set themselves the task of extending the properties of water after its preparation. Dina Ashbar, who has her own clinic and production facility in Germany, managed to extend the therapeutic effect of living water up to a month, but as she writes, “this requires additional rather expensive equipment.”

Let's talk a little more about the treatment of women with these types of water.

In view of the fact that most diseases of the vagina occur due to the fact that its acidity is disturbed (rots), the use of "dead" - acidic water, quickly destroys putrefaction and restores health. In the beginning, you need to apply "dead" water. When the infection is destroyed, then it is necessary to apply "living" water to accelerate the healing of the mucous membranes of the vagina, vagina, cervix.

For this, rinsing with a rubber pear is used, and “dead” water is made “stronger” - with increased acidity (you can get water much more acidic than your own urine - this is the strength of this method). So, wash the vagina with “dead water” 3-5 times a day, and at the end of the day “live”, 2 times. It all depends on the circumstances and the severity of the disorder.

In the same way, you can use this water for enema. With dysbacteriosis, use acidic - "dead" water. After 2-3 enemas (one enema per day) do 1-2 with "living" water. And so several times. Something like this should be done with colitis of the large intestine.

It is very good to treat young children with these types of water - it is harmless (naturally, everything should be in moderation).

Activated water several times enhances the healing properties of the golden mustache, cinquefoil and other herbs, as if created by nature to treat people. Activated water is also of great importance for growing a green first aid kit at home. My favorite golden mustache grows in a matter of weeks if watered and sprayed with activated water.

Cooked "live" and "dead" water acan be stored for a very long time without losing their properties. (A test of water in the laboratory of the Stavropol Vodokanal (“live” fortress 11.4 units and “dead” - 4.21 units) showed that the fortress decreased by hundredths of units over the month, and the temperature does not affect the decrease in water activity. )

Now devices for the preparation of Living and Dead water sold everywhere, you can buy and use. At present, tables of treatment of a number of diseases withthe use of "live" and "dead" water.

The use of "living" and "dead" water for the treatment of a number of diseases.

1. Prostate adenoma.

Within 5-10 days, 4 times a day, 30 minutes before meals, take 1/2 cup of "live" water.

After 3-4 days, mucus is released, there is no desire to urinate often, on the 8th day the tumor disappears.

2. Angina.

For 3-5 days, gargle with "dead" water 5 times a day after meals and drink 1/4 cup of "live" water after each rinse.

The temperature drops on the 1st day, usually on the 3rd - the disease disappears.

3. Allergy.

For three days in a row, after eating, rinse your mouth, throat and nose with “dead” water. After each rinse, after 10 minutes, drink 1/2 cup of "live" water. Rashes on the skin (if any) moisten with "dead" water. The disease usually disappears in 2-3 days. It is recommended to repeat the procedure for prevention.

4. Pain in the joints of the arms and legs.

3 times a day before meals, take 1/2 cup of "dead" water for 2-5 days

The pain stops on the 1st day.

5. Bronchial asthma; bronchitis.

For three days, 4-5 times a day, after eating, rinse your mouth, throat and nose with heated "dead" water. In 10 minutes. after each rinse, drink 1/2 cup of "live" water. If there is no noticeable improvement, do an inhalation with "dead" water: heat 1 liter of water to 70-80 ° C and breathe in its steam for 10 minutes. Repeat 3-4 times a day. The last inhalation can be done with “live” water and soda. Decreased urge to cough, improves general well-being. If necessary, repeat the course of treatment.

6. Inflammation of the liver.

Every day for 4-7 days, take 4 times 1/2 cup: on the 1st day only "dead" water, in the next - only "living" water.

7. Inflammation of the colon (colitis).

On the first day, it is better not to eat anything. During the day, 3-4 times drink 1/2 cup of "dead" water with a "strength" of 2.0 pH. The illness resolves within 2 days.

8. Gastritis.

For three days, 3 times a day, 1/2 hour before meals, drink "living" water. On the first day 1/4 cup, on the rest 1/2 cup. If necessary, you can drink another 3-4 days. Pain in the stomach disappears, acidity decreases, appetite and general well-being improve.

9. Herpes (Cold).

Before treatment, thoroughly rinse the mouth and nose with "dead" water and drink 1/2 cup of "dead" water. Remove the vial with the contents of herpes with a cotton swab moistened with heated "dead" water. Further, during the day, 7-8 times for 3-4 minutes, apply a swab moistened with "dead" water to the affected area. On the second day, drink 1/2 cup of "dead" water, repeat the rinse. Apply a swab dipped in "dead" water to the formed crust 3-4 times a day. You need to be a little patient when you break the bubble. Burning and itching stop within 2-3 hours. Herpes resolves within 2-3 days

10. Hemorrhoids.

For 2-7 days in the morning, wash the cracks with “dead” water, and then apply tampons with “live” water, changing them as they dry

Bleeding stops, cracks heal within 2-3 days.

11. Hypertension.

During the day, take 2 times 1/2 cup of "dead" water.

The pressure is back to normal.

12. Hypotension.

During the day, 2 times take 1/2 cup of "living" water.

Pressure normalizes

13. Worms (helminthiasis).

Make cleansing enemas, first with “dead” water, and after an hour with “living” water. During the day, drink every hour two thirds of a glass of "dead" water. The next day, to restore health, drink 0.5 cups of “living” water half an hour before meals. Feeling may be unimportant. If after 2 days recovery has not occurred, then repeat the procedure.

14. Purulent wounds.

Rinse the wound with "dead" water, and after 3-5 minutes moisten with "living" water, then moisten only with "living" water 5-6 times a day.

Within 5-6 days, healing occurs.

15. Headaches.

Drink 1/2 cup of "dead" water.

The pain goes away in 30-50 minutes.

16. Fungus.

First, thoroughly wash the places affected by the fungus with hot water and laundry soap, wipe dry and moisten with “dead” water. During the day, moisten with "dead" water 5-6 times and let dry without wiping. Wash socks and towels and soak in "dead" water. Similarly (you can once) disinfect shoes - pour “dead” water into it and let it stand for 20 minutes. The fungus disappears within 4-5 days. Sometimes the procedure needs to be repeated.

17. Flu.

During the day, rinse your nose and mouth with "dead" water 8-12 times, and drink 1/2 cup of "living" water at night.

During the day, the flu disappears.

18. Diathesis.

Moisten all rashes, swellings with "dead" water and let dry. Then make compresses with "live" water for 10-5 minutes. Repeat the procedure 3-4 times a day. The affected areas heal in 2-3 days.

19. Dysentery.

On this day, it is better not to eat anything. During the day, 3-4 times drink 1/2 cup of "dead" water with a "strength" of 2.0 pH. Dysentery passes during the day.

20. Jaundice (Hepatitis).

3-4 days, 4-5 times a day, 1/2 hour before meals, drink 1/2 glass of "live" water. After 5-6 days, see a doctor. If necessary, continue treatment. Feeling better, appetite appears, the natural complexion is restored.

21. The smell of feet.

Wash up warm water feet, wipe dry, moisten with "dead" water, and after 10 minutes - with "live" water and let dry

The bad smell will disappear.

22. Constipation.

Drink 0.5 glass of "live" water. You can make an enema from warm "living" water.

23. Toothache.

Rinse your mouth with "dead" water for 5-10 minutes. The pain disappears.

24. Heartburn.

Drink 1/2 glass of "live" water.

Heartburn stops

25. Colpitis.

Warm up "dead" water and "live" to 37-40 ° C and douche at night first with "dead" water, and after 15-20 minutes - with "live" water. Repeat the procedure for 2-3 days.

After one procedure, colpitis disappears.

26. Conjunctivitis, barley.

Rinse the affected areas with warm water, then treat with heated "dead" water and allow to dry without wiping. Then, for two days, 4-5 times a day, make compresses with heated "living" water. At night, drink 1/2 glass of "live" water. The affected areas heal in 2-3 days.

27. Ringworm, eczema.

Moisten the affected area with “dead” water for 3-5 days and let it dry, then moisten it with “living” water 5-6 times a day. (In the morning, moisten with "dead" water, after 10-15 minutes with "live" water and 5-6 more times with "live" water during the day.)

Heals in 3-5 days.

28. Washing hair.

Wash your hair with shampoo, wipe it off, moisten your hair with "dead" water, and after 5 minutes with "live" water.

Dandruff disappears, hair becomes softer, healthier.

29. Burns.

In the presence of dropsy bubbles, they must be pierced, moisten the affected area with “dead” water, and after 5 minutes “live”. Then during the day moisten with “living” water 7-8 times. Procedures to carry out 2-3 days.

Burns heal in 2-3 days.

30. High blood pressure.

In the morning and evening, before eating, drink 1/2 cup of "dead" water with a "strength" of 3-4 pH. If it does not help, then after 1 hour drink a whole glass. The pressure normalizes, the nervous system calms down.

31. Low blood pressure.

In the morning and in the evening, before eating, drink 1/2 cup of "living" water with pH = 9-10. The pressure normalizes, there is a surge of strength.

32. Diarrhea.

Drink 1/2 cup of "dead" water, if diarrhea does not stop within an hour, repeat the procedure.

Abdominal pain stops after 20-30 minutes.

33. Polyarthritis, arthritis, osteochondrosis.

Full cycle of treatment - 9 days. Drink 3 times a day 30-40 minutes before meals: - in the first three days and 7, 8-9 days, 1/2 cup of "dead" water; - 4th day - break; - 5th day - 1/2 cup of "living" water; - 6th day - break.

If necessary, this cycle can be repeated after a week. If the disease is running, then you need to apply compresses with warm "dead" water to the sore spots. Joint pain disappears, sleep and well-being improve.

34. Cut, prick, tear.

Rinse the wound with "dead" water and bandage it.

The wound heals within 1-2 days.

35. Cold of the neck.

Make a compress on the neck, soaked in warm "dead" water, and drink 4 times a day, 1/2 cup before meals.

The disease disappears within 1-2 days.

36. Prevention of insomnia, increased irritability.

At night, drink 1/2 cup of "dead" water. Within 2-3 days, 30-40 minutes before meals, continue to drink "dead" water in the same dosage. Avoid spicy, fatty and meat foods during this period. Sleep improves, irritability decreases.

37. Prevention of acute respiratory infections, colds during epidemics.

Periodically, 3-4 times a week in the morning and in the evening, rinse the nose, throat and mouth with “dead” water. After 20-30 minutes, drink 1/2 cup of "live" water. In case of contact with an infectious patient, perform the above procedure additionally. It is advisable to wash your hands with “dead” water. Vigor appears, efficiency increases, general well-being improves.

38. Psoriasis, psoriasis.

One cycle of treatment - b days. Before treatment, wash thoroughly with soap, steam the affected areas, with the maximum tolerable temperature, or make a hot compress. Then, moisten the affected areas with plenty of heated "dead" water, and after 8-10 minutes begin to moisten with "living" water. Further, the entire treatment cycle (i.e., all 6 days) should be washed 5-8 times a day on the affected areas only with "live" water, without prior washing, steaming and treatment with "dead" water. In addition, in the first three days of treatment, you need to drink 1/2 cup of "dead" food before meals, and on days 4, 5 and 6 - 1/2 cup of "live" food.

After the first cycle of treatment, a week break is taken, and then the cycle is repeated several times until recovery. If during the treatment the skin dries out a lot, cracks and hurts, then you can moisten it several times with “dead” water.

At 4-5 days of treatment, the affected areas of the skin begin to clear, clear pinkish areas of the skin appear. Gradually, the lichen disappears completely. Usually 3-5 treatment cycles are enough. You should avoid smoking, drinking alcohol, spicy and smoked foods, try not to be nervous.

39. Radiculitis.

During the day, 3 times before meals, drink 3/4 cup of "living" water. The pain disappears within a day, sometimes after 20-40 minutes.

40. Expansion of veins, bleeding from ruptured knots.

Rinse the swollen and bleeding parts of the body with "dead" water, then moisten a piece of gauze with "live" water and apply to the swollen areas of the veins.

Inside, take 1/2 cup of "dead" water, and after 2-3 hours start taking 1/2 cup of "live" water at intervals of 4 hours 4 times a day. Repeat the procedure for 2-3 days.

The areas of swollen veins resolve, the wounds heal.

41. Acne, increased peeling of the skin, acne on the face.

In the morning and in the evening, after washing, 2-3 times with 1-2 minute intervals, wash the face and neck with "living" water and let dry without wiping. Make compresses on wrinkled skin for 15-20 minutes. In this case, the "living" water should be slightly warmed up. If the skin is dry, then first it must be washed with "dead" water. After 8-10 minutes, do the above procedures Once a week, you need to wipe your face with this solution: 1/2 cup of "live" water, 1/2 tablespoon of salt, 1/2 teaspoon of soda, after 2 minutes, rinse your face with "live" water.

The skin is smoothed, becomes softer, minor abrasions and cuts are tightened, acne disappears and peeling stops. With prolonged use, wrinkles almost disappear.

42. Removal of dead skin from the feet.

Soak your feet in soapy water, wash them in warm water, and without wiping, wet your feet in warm "dead" water, rubbing areas with growths, remove dead skin, rinse your feet in warm water, wipe dry.

43. Improving well-being, normalization of the body.

In the morning and evening after eating, rinse your mouth with "dead" water and drink 1/2 cup of "live" water with an alkalinity of 6-7 units.

44. Cholecystitis (inflammation of the gallbladder).

For 4 days, 3 times a day, 30-40 minutes before meals, drink 1/2 glass of water: the 1st time - "dead", the 2nd and 3rd time - "live". "Living" water should have a pH of about 11 units. Pain in the region of the heart, abdomen and right shoulder blade disappear, bitterness in the mouth and nausea disappear.

45. Eczema, lichen.

Before treatment, steam the affected areas, then moisten with “dead” water and allow to dry. Further, 4-5 times a day, moisten only with “living” water. At night, drink 1/2 glass of "live" water. The course of treatment is a week. The affected areas heal within 4-5 days.

46. ​​Erosion of the cervix.

Douche at night warmed up to 38-40 ° C "dead" water. After 10 minutes, repeat this procedure with "live" water. Further, repeat the washing with "live" water several times a day. Erosion resolves within 2-3 days.

47. Gastric and duodenal ulcer.

Within 4-5 days, 1 hour before meals, drink 1/2 cup of "living" water. After a 7-10 day break, repeat the treatment. Pain and vomiting stop on the second day. Acidity decreases, the ulcer heals.

Note.

When ingesting only "living" water, thirst arises, it must be quenched with compote or acidified tea. The interval between taking “dead” water and “live” water should be at least 2 hours.

Alkaline water is considered to be such water, in which the pH is 10-11 units (it has a white precipitate). Acidic water is considered to be one in which the pH is 4-5 units.

How to prepare water is described in the instructions for the device.

"Living" and "dead" water An excellent addition to the system of natural healing.

As you may have noticed application of Living and Dead water does not require any skills, knowledge, everything is done very simply and a confident result is achieved in a fairly short period of time, which is a huge plus for this type of treatment.

Pay attention to the broadest action spectrum of Living and Dead water, about 50 different diseases can be cured, and how many more options for domestic use. In a word, for almost all occasions, I was very impressed.

About the device "Live and dead" water.

Now let's talk directly about the device for obtaining Living and Dead water. Now there are many different types of devices on the market (Melesta - made in Ufa, Zhivitsa - made in China), there are also home-made devices using a fire hose (I do not advise using these), there are also officially made by various enterprises, I personally tried a lot and settled on the product, produced in Belarus by the research and production enterprise "Akvapribor".

Of all the instruments I have seen, I believe apparatus AP-1 the most correct. It uses very quality materials production, this is high-quality food-grade plastic, a unique method of manufacturing electrodes from noble metals (titanium, platinum), a very high-quality ceramic glass made of a special type of clay that acts as a diaphragm, a very nice appearance of the product. Together, this gives the effect that the inventor of the Kratov device achieved.

The device has passed all possible tests, and has all the necessary certificates of conformity.

Household water activator (electroactivator) AP-1 - a light, not complicated, compact device that allows everyone at home in just 20-30 minutes to get about 1.4 liters of activated ( "alive" and "dead") water. To do this, it is enough to fill the vessel with water, plug the plug into a 220V socket and after 20-30 minutes. Drain the already activated water into different vessels. The device is electrically safe, reliable, and consumes electricity like a 40 watt light bulb.

The main differences and advantages of the AP-1 device.

• Four-electrode switching circuit: 2 anodes and 2 cathodes.
• The anodes are made of ultra-pure titanium with a coating (black on the side of the passage of electric current) of a platinum group metal, cathodes are made of food grade stainless steel.
• As a membrane, a structure is used in the form of a ceramic microporous glass (from clay used in the production of food utensils) made according to a special technology.
• The coating is applied to the anodes in order to prevent the destruction of the anodes in the process of electrolysis and the penetration of ions of heavy metals chromium, nickel, vanadium and other metals into the water, which are not excreted from the body.
• In order to ensure electrical safety and compliance with the requirements of GOST, a switching power supply with reduced voltage and galvanic isolation from the 220 V mains is used as a power source.
• The design provides for additional security measures in the form of a limit switch used to turn off the power from the electrode system when the top cover of the electroactivator is removed.

The device for the preparation of "Living and Dead Water" - "Melesta"

There is another device that I also recommend, this is device for preparing "Alive and Dead" water "Melesta"- this device is made of cheaper materials than AP-1: instead of a ceramic glass, a fabric one is used (acts as a diaphragm), and instead of 4 electrodes made of high-quality alloys, ordinary 2 electrodes made of food steel are used, nondescript appearance of the product, rough execution.

But all this contributed to a significant reduction in the cost of the product compared to AP-1, which is a significant plus for many people whose wealth does not allow them to purchase AP-1, the water obtained by this device has all the properties that water prepared on AP-1, Therefore, I also recommend it to everyone without exception for home use. It has all the necessary certificates of conformity (No. POCC RU. AYa B24400).

P.S. AP-1 is your personal doctor and an excellent assistant in everyday life. I personally actively use such a device and am very pleased with its work, it has hundreds of applications, with its help you and your family and friends can forever forget about diseases and visiting doctors. The device perfectly copes with its tasks, it will become your reliable friend you can always rely on.

Addendum to the article dated 05/13/2010

The devices for preparing "Alive and Dead" water "Zdravnik" and "PTV" were considered.

The device for the preparation of "Alive and Dead" water "Zdravnik".

Externally, the device is made by analogy with "Melesta" and the Belarusian "AP-1", but in terms of workmanship it is closer to AP-1.

The device is very easy to use, does not require special care and maintenance. It is worth noting the high quality of the electrodes (food grade stainless steel is used), the requirements for electrical safety are met, there is a certificate of conformity (TU - 5156-001-62565770-2010).

As well as AP-1, it has two versions:

• The classic, time-tested version of the device with the use of a fabric glass for "Dead Water".
• Version with the use of a glass for "Dead" water electroosmotic nanostructured ceramics.

A little more about this glass.

The beaker ensures optimum pH and Redox Potential of the resulting solutions. The glass allows you to visually monitor the process of water activation and allows you to obtain solutions with a higher level of Oxidation-Reduction Potential (ORP).

The principle of the glass:

When carrying out the process on initial stage the necessary polarization of solutions occurs and classical electroosmosis is observed - the liquid is shifted towards the negatively charged electrode (the anolyte level drops). Upon reaching the oxidation

Reduction Potential of catholyte and anolyte of optimal equilibrium values ​​occurs repolarization on the walls of the glass and the liquid begins to move in the opposite direction (anolyte level rises).

Due to the greater porosity of the glass, it practically does not clog during operation and requires less maintenance.

Device for preparing "Alive and Dead" water "PTV».

This device is neither externally nor internally (in execution) similar to Melesta, AP-1, Zdranik.

The main purpose of this device is a professional activity, it can be used in medical institutions, rest homes, dispensaries, and of course it can be used at home.

The device is certified and consumes only 75 watts of electricity. (Certificate of conformity No. ROSS LT. AYA46.A14995San-epidemiological conclusion No. 77.01.06.485.P.06092.03.2)

For the development and organization of serial production of the PTV-A household electrolyzer-activator, SPF “INKOMK” was awarded the Silver medal in 2004 and the Bronze medal in 2005 by the International Salon of Innovations and Investments.

What are its differences:

A glass is not used to prepare "Dead" water, instead of a glass, the device is divided into two parts (the part for "Dead" water is removable), these parts are divided by a membrane made of a special wood fiber.

Outwardly, the device looks very solid, a high-quality case, the electrodes are much thicker, more reliable than other devices, have a long service life, and are very well made.

This device also has two options with and without a regulator, with the help of a regulator you can set the concentration of water, you can make a healing drink for everyday use, you can make water for disease prevention, or you can make a solution for medicinal purposes.

Device for preparing "Alive and Dead" water "Melesta" (economy class device). - 1300 rubles.