Make living and dead water. living water cooking

20.05.2019

Many of us have heard about the so-called living and dead water. This is stated in books, this issue is addressed in the cinema, and finally, you can find information about such water in the vastness of the World Wide Web.

And this is not fiction, living and dead water really exists. Let's talk about this in more detail.

Dead water (anolyte) is a solution obtained as a result of electrolysis, which has a large positive charge and a strongly acidic acid-base balance. Anolyte is known for the following properties:

disinfecting;
anti-inflammatory;
antimycotic (antifungal);
anti-allergic.

Why does anolyte have such healing properties? There are no miracles here, everything is quite natural and explained from a scientific point of view.

The fact is that during the electrolysis process, chlorine and oxygen radicals, hydrogen peroxide are concentrated in the anode zone.

But it is they who help macrophages (the protective cells of our body) to destroy the viruses, microbes, and fungi that have come across.

So contact of the anolyte with a microbial cell leads to the destruction of the cell wall of the microbe, leakage of cell components into the intercellular space, dysfunction of the ribosomal apparatus (it is responsible for protein biosynthesis from amino acids), and other adverse changes.

Apparatus AP-1 ^

This device has quite high level quality, this is the so-called electroactivator. In its manufacture were used:

food plastic of the highest class;

electrodes made of heavy-duty noble metals;

ceramic glass, created from a special grade of clay.

Positive features of the product are the following points:

the device looks very nice on the outside;

it allows you to get almost one and a half liters of water in just 20-30 minutes;

the device is characterized by low power consumption - at the level of a 40-watt light bulb;

the anodes of the device are made of titanium and coated with a platinum group metal, the cathodes are made of stainless steel.

But it should be noted that AP-1 costs significantly more than other devices. So, for a model with an indicator that reflects the quality of water, you will have to pay about 100 USD.

"PTV" ^

This device differs significantly from the previous three, since it is intended primarily for professional activities (sanatoriums, rest homes, medical institutions), although it also finds its application at home.

The main advantages of the device are:

low power consumption for a product of this class - 75 watts;

thick electrodes;

long service life.

Besides, this device does not have a glass in which dead water is prepared. Instead, there are simply two separate containers separated by a special wood membrane.

However, the disadvantage of this device is its cost. For home use machine 130-140 dollars- already too much.

Are you concerned about your health and the condition of your back? Then be sure to read the article about how healthy they are, how much they cost, how to make the right choice?

In the summer (and indeed in the warm) season, it is very useful to swim on fresh air. Summer showers installed in the country can help you with this. Read all the most important and up-to-date information: prices, features of choice and installation!

Water aerobics is a very beneficial activity for health (including weight loss). Read more about this sport in the article:
, it is very interesting!

Making living and dead water with your own hands ^

In addition to the officially manufactured devices discussed above, there are home-made ones. We will offer one proven method for self-production of water. So, for this you will need:

two stainless steel mugs;

several syringes;

ordinary wire - a cord with a plug at the end;

one diode.

It is better to buy mugs with handles, since you need to drill a hole directly in the handle and screw a diode into it (you should use diodes for a load of 220 volts, 6 amps).

The mugs themselves should be mounted on a stand made of non-conductive material. To strengthen, you can cut holes in the stand equal in diameter to the bottom of the mugs, or you can simply glue the mugs.

Two syringes are glued into a single U-shaped tube (for this you have to cut their tops), and another syringe is firmly stuck on top (right in the middle of the crossbar of the imaginary letter “P”).

When the homemade device is ready, the mugs need to be filled with water and placed on a stand.

The prepared tube should be lowered into the circles so that one end of the letter "P" is in the left circle, and the second in the right one.

After that, the upper syringe is pulled out to the stop (thereby filling the tube with water). Then the end of the wire with a positive charge is connected to the diode (recall, it is installed in the handle of one of the mugs), and the end of the wire with the “minus” is connected to the other mug.

The plug is plugged into an outlet and left overnight. By morning, this kind of apparatus will give out dead water (in the circle where the diode is installed) and live.

How to make water in the device? Instructions for use ^

Of course, not everyone will dare to create a device for preparing living and dead water on their own, and therefore you need to know how to work with the purchased device.

So, most devices have a container for living water and a separate glass for dead water (as we have seen, the glass can be fabric or ceramic).

Initially, the container is filled with water, and then the device is turned on.

After that, the process of solution polarization begins and standard electroosmosis proceeds clearly: the liquid flows towards the negative charge (accordingly, the anolyte level drops).

As soon as the redox parameters of the catholyte and anolyte equalize, the water will go in the opposite direction due to repolarization.

So here in an interesting way factory-made devices provide living and dead water.

What do people say? Feedback on the use of living and dead water ^

All descriptions are, of course, good, but you always want to learn about the use of appliances and the water itself from ordinary people. After collecting all the information from the reviews, we offer some of the most common points:

1) independent production the device is rather unsafe, since there is a high risk of water pollution due to the materials from which this device will be created;

2) the cheapest devices do not achieve the intended effect, and therefore their purchase is a throw away Money to the wind;

3) Water can be used to heal wounds. First the wound is treated dead water, and after drying - alive.

Many say that after the start of the use of living and dead water, they completely forgot about pills and doctors:

“My kids have always had a runny nose, all year round. And then I decided to use living and dead water. And now for 4 months my children do not get sick at all!”

“My wife suffered from pancreatic problems. I started drinking water and everything! She now has no pain at all, and diets are not needed at all. ”

“I started drinking this water just like that, out of curiosity. I now constantly good mood, and I work with such zeal that all my friends envy.

Well, let the treatment of living and dead water benefit you too. Be healthy!

Video about the benefits of living and dead water for health:

No related posts

29 responses to the article“ Treatment of living and dead water: fairy tales or reality?”

Alex11
Water therapy is interesting. But the names are living and dead water, of course, you immediately remember fairy tales. And accordingly, such names do not add credibility. Although the idea itself is interesting.

Pavel
I have been using the Iva-1 water activator for 2 years already, before that I used the Ap-1 activator. To be honest, Ap-1 is an activator that is not worth the money. The anode is coated not with platinum, but with Teflonium material. And this material is subject to anodic dissolution: (I recognized 1 anode electrode costs about 900-1000 rubles. And they sell this Ap in wholesale for 1500 rubles. Therefore, they saved on the material.
Now I use the Iva-1 activator, there is a really good coating there (I handed it over for examination) - really a sputtering of ruthenium (this is a platinum group metal), so it just does not dissolve during electrolysis. In general corresponds to its price — 4100 rubles. And about water, believe it or not, but it really heals!!!

Elena
It's true, even my grandmother treated tragic wounds with homemade products.

Sergey
I made electrodes from silver. I took two silver fifty dollars. One cathode, the other anode, or vice versa, depending on where + or - the power source is

Yuri
Two fifty dollars of what sample? To make a good silver electrode, you need 999 samples - the highest, sample means how many grams of silver are in 1000 grams. You probably have fifty dollars, most likely 925 samples - this means that along with silver there are still impurities of other metals and when an electric current is applied to such an electrode, on the contrary, you will make the water even worse. I advise you to buy a water silvering agent, there are a lot of them on our market, for example, willow-2 Silver, this installation already has an electrode with a 999 test. Other than that, it's up to you :)

Marina
To be honest, the phrase "dead water" sounds somehow strange and even repulsive, but in fact it is very useful, no less than the so-called "living water". Having learned that the properties of water can be changed, I bought a special device and began to use water for medicinal purposes. The result was amazing: I began to feel much better, headaches went away.

Anatol

Albert
Regarding the unusual properties of water, I watched a TV program. It turns out that water has the ability to change its crystals depending on its environment. Scientists took a drop of water and turned on a recording of some classical music or children's laughter next to it, and the water crystals acquired various beautiful forms in the form of snowflakes, etc. They did the same with another drop, only the recording was different, for example, hard rock or swear words. In this case, the water crystals broke up into “torn” pieces or took on ugly shapes. Like this…

Julia
I read an article by a doctor of chemical sciences on ionized water “Arguments in favor of alkaline water. Letter to the editor from the doctor of chemical sciences. I recommend to everyone http://www.labprice.ua/naukovo_pro_chudesni_vlastivosti_vodi/argumenti_na_korist_luzhnoi_vodi_list_v_redakciyu_vid_doktora_ximichnix_nauk

Olga
The idea of dead and living water is interesting, but I don't want to experiment on myself. It's kind of scary.

Andrei
I do not trust such inventions. I prefer drinking plain filtered water.

Komzin Boris
Our water cannot be used for treatment at all, so it can only harm health if taken for a long time.

Alexander
I tried it on myself back in 1985-95. The device was homemade. The pH was checked with ordinary litmus paper. Highly effective remedy!!! I made the device and started using it, because I tried a lot of remedies for sciatica, all kinds of ointments, massage, cast iron, copper shavings ... nothing helped. Using J. and M. water, the pain disappeared in just a few (2-3) days. Until today, the pain has not recurred. Angina is treated within 2-3 rinses, after an hour. Yes, many diseases are easily treated. In addition, the effect of using water is long-term. And yet, as far as I understood from experience, water is not purified, but decomposed into its constituent parts. To obtain F and M components, it is better to use already purified water. Both derivatives are useful! So I recommend it to everyone!

platonii 20.04.2017 at 18:02 Vadimka
I had an unusual case when activating water in AP1 (now everything is fine with the electrodes in terms of quality) and I was very good. bad mood everything annoyed me ... I poured some water into the activator and turned it on for 20 minutes as usual, after 15 minutes something in the water strained me, it warmed up to 40 degrees (this has never happened in six months of use) I turned it off and decided to check it, I felt the smell of iron in the water when I removed the activator, rust and some black flakes, the taste of living water did not differ from dead water, then I made sure that the water records information and our thoughts ... Now my activation is going well (I never fill water in an irritated state), here for more than a year I have been drinking 2 liters of living water a day and I feel good. And I had a wen on my thigh (at first I thought it was a pimple), I moistened it with dead water (I used to miss days) and after 3 months I used living water as usual , after 3 months the atheroma began to shrink, and after a week it shrank to an inconspicuous point and disappeared. Living and Dead Water RESPECT
As a result of twenty years of research by biophysicists of Kazakhstan under the guidance of Professor V.M. Inyushin, an amazing discovery was made: in natural biogenic (useful for biological organisms) water, the existence of a special substance in small amounts - plasma (free complexes of particles unbound into atoms and molecules), which was called hydroplasma, was discovered.
WATER FOR LIFE - has a very high particle density, and therefore a huge free energy, which can withstand water degradation that occurs under the influence of external negative factors environment and give a person a colossal resource of ENERGY - FOR YOUTH, HEALTH and LONGEVITY!
DETAILS! Buy for yourself or build your sales business.
https://lk.ip-one.net/sign_up.php?sponsor=37523

Michael
I have been using Melesta for the third year now, its price is now 1750 rubles, a very convenient device, and a well-thought-out design for this price, I myself repair and service medical equipment, I know what I am writing about.

Didn't expect this result! I bought a homemade device from the USSR. He began to study literature, dead water was used in hospitals of the USSR for disinfection. I made a device with shungite plates. An unexpected result: all the water seems to be alive. Can someone write about water on shungite plates? In the candidate times of the USSR, living water is irradiated with ultrasound. I have tried like water of the strengthened action. I think you need a wooden container for the penetration of ultrasound. My mail: [email protected]
, Maybe someone will follow with shungite?

Everyone knows that the human body is a large number water. But the fact that throughout life, the amount of water in human body changing, really interesting observation. An unborn baby that is still in the womb is almost 90% liquid. An adult person in his body will have an average of 70-80% fluid. By the time he is called "elderly", his own fluid level will drop to 60%. The most fluid-rich organ in the human body is the brain.

Have you noticed that a decrease in the amount of water in the body leads to poor health, and in old age, respectively, to numerous diseases? The lack of water will affect the functioning of the entire “mechanism” of a person.

People have always wanted to live long and healthy lives. However, for a long time, science could not confirm in any way medicinal properties water, considering all the legends and beliefs regarding living-dead water only as children's fairy tales. Today, attitudes towards water are beginning to change. AT correct work and activation of water, many see the future of the human race, because water is an unsurpassed source of nutrients.

The recipes given in this article do not claim to be the ultimate truth. These recipes, alas, will not extend your life for 400 years - such sources have disappeared from the face of the Earth, if they ever existed at all. And, nevertheless, they are able to “charge” water with a certain “mood”.

Do you think that living and dead water at home is completely unrealistic? It's in vain. We bring to your attention the most interesting and affordable recipes.

Recipe 1

To prepare some live water for yourself, you need to take about 10 g of gold, using the usual baking soda clean it, rinse it under running water. Next, we cover this piece of gold with rock salt and leave it overnight. In the morning, we wash it thoroughly again and put it in a saucepan, into which we pour two liters of water. We put on fire. We are waiting for it to boil. Add one-fourth of a saucer of beeswax to boiled water. We give our "potion" to boil for 15-20 minutes, then turn off the fire.

After we let our “live” drink cool, we collect the wax on the surface, take out the gold (and return it to its place!). Catch congratulations, you have successfully completed the quest to prepare living water at home.

One will come in handy:

to improve immunity
to get out of depression
to increase performance
for rehabilitation after serious illnesses
for increase vitality generally

It is advised to take the elixir of life in the morning on an empty stomach, no more than one glass.

Recipe 2

Surely, in the same place where you took the gold, you still certainly had 15-20 grams of silver lying around? Take him to the kitchen. We proceed in principle according to the same algorithm. We put silver in a saucepan, fill it with water in a volume of two liters, wait until it boils and add wax.

This time we “boil” the metal almost twice as long - about 30 minutes. Remove the water from the fire, wait until it cools down a bit, throw out the wax. Silver is not thrown away, it will still be useful to you. Everything, dead water is ready for use.

Dead water is good for:

for wound healing externally
for insomnia (take at bedtime)
to lower pressure - (half a glass before meals)
at elevated temperature
with ulcers
with tumors
in inflammatory processes

If the evil eye is suspected, dead water will also help, only it should not be used inside, but externally, that is, to wash.

Recipe 3

For craftsmen and fans of something to "smart up" a quest is offered to collect a simple device. We will be based on obtaining miraculous elixirs by treating with electric current.

To assemble the desired device, you need:

Plain glass jar
A piece of tarp or any slightly water-permeable fabric
source of power
multiple wires

and the most important…

desire to do this!

From a piece of tarpaulin or fabric we make a bag, which we lower into the selected glass jar. We fix it in this container, but keep in mind that it should “enter and exit” easily.

We take 2 wires, it is preferable that they have a stainless rod. We put one in a jar, the second in a bag. These electrodes are connected to a direct current source. Pour water into the jar and bag.

If you are using an AC source, then take a powerful diode that will equalize the alternating current if you attach it to the positive pole of the power source.

When the “device” is on, it takes 10-15 minutes (based on a three-liter jar) to prepare dead water in the bag, and live water in the jar.

As an experiment

To check amazing strength of this element, you can take the easiest path and use the method of a Japanese scientist. Pour tap water into two different containers. On one you can stick a sticker by writing "Good", on the other - "Bad". And place the banks in different places, better - in different rooms. Tara "good" say beautiful words, read poetry, turn on classical music.

Put a “bad” water on hard rock, tell nasty things, scold, presenting an ill-wisher, mother-in-law, mother-in-law, boss, rival - everything is according to your desire. Remove stress and give bad water.

It is better not to drink water from a “bad” jar, and even not to water the flowers with it! Unlike positive water, “bad” water is not solemnly dead.

To neutralize "harmful" water, we can lead it through other states - to complete a cycle - freezing-thawing or evaporation-condensation. Then again you can share positive emotions with water.

Something is also known about the properties of melt and magnetic water. To use them to your advantage, pass the liquid through any filter, and then freeze in an enamel or frost-resistant dish. In winter, you can put it in the cold, in summer - hide it in the freezer.

A thin ice crust forms on the surface of the water. It needs to be removed. Then we wait until 2/3 of the water turns into ice. Then we imagine ourselves as ice axes and pick a small hole in the ice to drain the remaining water.

Now you can defrost the ice and enjoy the purest water. However, water obtained by "melting" is not subject to repeated boiling, freezing and long-term storage.

Appropriately treated liquid - a kind of living and dead water at home - not only melted water or "electrified". Useful properties Water also has magnetic properties. It is able to cleanse the vessels of foreign proteins and cholesterol plaques. Magnetic water strengthens the immune system and improves metabolism. It has a strong bactericidal effect.

Magnetize a simple drinking water quite simply. This can be achieved using a special nozzle on the faucet or a magnetic funnel. Often manufacturers themselves build magnetic elements into water filters. It is important that magnetic water retains its healing properties throughout the day.

Once upon a time, in Russian fairy tales, the concept of “dead” and “living” water appeared. The first heroes washed the wounds received, and a few sips of the second revived the person. You can believe the legends or not, but scientists have learned how to get these magical liquids. The process was called electrolysis. As a result of the action of an electric current on ordinary water, “living” and “dead water” is obtained. The do-it-yourself device is easily made from improvised materials.

The essence of unique disinfection, or a little chemistry

To begin with, two metal plates are lowered into a container of water, each of which is connected to one of the contacts of the battery. When such a circuit is closed, electricity arises in it, and the process of electron movement begins in the liquid. Near the anode plate, an acidic environment is formed, near the cathode - alkaline. After disconnecting the device from the current, everything mixes, returning to its normal state, the water again becomes an ordinary liquid.

During the electrolytic reaction, several substances are formed, among which:

oxygen, acid and ozone;
chlorine and hydrogen peroxide;
nitrogen and hydrogen.

Where did all these substances come from? It is known that water is a universal natural solvent, which neither liquids, nor gases, nor minerals can resist. As a result of electrolysis, a change in molecular bonds occurs. The activated solution becomes softer and more transparent than the original one. Oxidizers, produced from the water itself, disinfect the liquid and return to its previous state, having completed its task.

What is called the terms "living" and "dead water"? A do-it-yourself device will help not only show children interesting experience. Science has proven the disinfecting and healing properties of these liquids.

The composition and features of "fabulous" liquids

The very first apparatus for preparing “living” and “dead” water with their own hands for industrial purposes was designed by workers from one of the boreholes in the USSR. They accidentally discovered the healing qualities of such a liquid. After washing with it, burns and cuts on the skin of workers healed, drinking water inside increased the general tone and working capacity of people. Medicine became interested in the phenomenon, but the use of activators did not receive much distribution.

It turned out that the “live” fraction has a weakly alkaline environment and is a strong biostimulator. Plant seeds processed by her give stronger shoots and a rich harvest. Ingestion strengthens the human immune system, improves digestion. The influence of such water on the aging process and the growth of cancerous formations has been noticed.

"Dead" water has a slightly acidic composition, is a strong disinfectant and sterilizing agent. This fraction smells slightly of acid and has a slight astringent taste. This liquid perfectly treats colds by rinsing. It reduces pressure, soothes joint pain, relieves insomnia.

How to make an apparatus for "living" and "dead" water with your own hands

The simplest device for direct electrolysis is assembled from the following parts:

glass liter container;
two rectangular pieces (145 mm by 40 mm);
two pieces of power wire;
plug;
denim bag or;
plastic circle with holes.

The edge of each strip is bent at an angle of 90 degrees (10 mm). On the bent parts, drill 2 holes for the bolts. On one of the electrodes, between the mounting holes, another one (larger) is made for installing the diode.

Instrument assembly procedure

Do-it-yourself apparatus for "living" and "dead" water is mounted in the following sequence. The electrodes are placed on the cover and fixed with bolts. The metal strips should be parallel to each other. The diode is screwed into the appropriate hole and connected to the upper wiring terminal. A wire is also soldered to the second electrode. Both outputs close on the switch.

A bag sewn from a tarpaulin is put on the anode-plate with a diode to collect "dead" water. Immediately after turning off the current from this cover, you need to quickly pour the liquid into a separate vessel. A concentrate of "living" water is formed around the negative electrode.

The fabric bag is used as a separating membrane. It prevents mixing of the solution after a power failure. The diode serves as a "rectifier" for AC from the mains.

The do-it-yourself apparatus for making "living" and "dead" water is ready. It remains to fill the jar and bag with ordinary liquid from the tap and plug the plug into the network.

How long can "living" and "dead" water retain its qualities

The do-it-yourself device (the photo demonstrates this) is assembled and connected to the power supply. The reaction should continue for about 5 minutes until the jar is slightly heated. During this time, it is necessary to prepare two vessels for transfusion of the obtained fractions. Immediately after the current is turned off, the electrodes are carefully removed from the vessel along with the canvas cover. "Dead" water is poured from the bag into one container, and "live" (remaining in the main jar) - into another.

If you hesitate and leave both liquids in the original container, the reaction will very quickly occur in the reverse order, and all the released components will mix. The water will remain activated, disinfected and useful, but will lose the exclusive properties that the apparatus of "living" and "dead" water gave it. With your own hands, you can ruin the whole thing, and you have to start the process all over again.

The storage times are as follows:

acidic liquid ("dead") is stored for up to two weeks;
alkaline (“live”) must be consumed within a few hours, as it quickly loses its healing qualities.

Is it possible to install ordinary stainless steel for the anode and cathode

When making an apparatus for “living” and “dead” water with your own hands, it is important to use exactly food steel, purified from all kinds of impurities. It has been proven that under the influence of electricity during the reaction, heavy metal molecules are released. Water saturated with ions of nickel and chromium, molybdenum and iron, vanadium and others becomes not only harmful, but poisonous. It cannot be used for drinking.

That is why food grade stainless steel is used in such a device.

Living and dead water has many features and healing qualities. This is the rarest and universal remedy, which can help in the fight against various diseases.

Before you start treatment with these products, you need to diagnose the body. It is recommended to consult a doctor and undergo the necessary medical examinations.

Activated water is a good adjuvant in the treatment of a wide range of diseases. The liquid stores useful qualities for only a couple of days, because its benefits are quickly lost.

What is living water

In old Russian fairy tales, living water could only be obtained from healing springs, but in reality such a liquid is formed by simple chemical processes. Its preparation takes place with the help of special devices.

In them, the liquid undergoes electrolysis, due to which the water receives a positive (dead) or negative (live) electrical potential. During electrolysis, the properties of water improve. It is cleared of harmful chemical compounds, pathogenic microorganisms and impurities.

Composition and features

A distinctive property of living water (catholyte) is its pH level, which is equal to or greater than 8. Due to this, it has a biostimulating effect, restores immunity, and has antioxidant properties.

The positive qualities of living water lead to the activation of all natural processes in the human body, to improve appetite and metabolism, normalize blood pressure, improve overall health. Catholyte accelerates the healing of wounds, bedsores, burns, ulcers in the stomach and intestines. Regular fluid intake helps smooth wrinkles and improve hair growth.

The tool does not have any side effects, which means that it is not capable of harming health. Catholyte must be kept in a dark room in a closed vessel. But even with proper storage, after 2 days, the liquid will lose its positive biochemical qualities, so it must be consumed as soon as possible.

The pH level of dead water (anolyte) does not exceed 6. The liquid has an antimicrobial, antiviral and anti-allergic effect. Anolyte has anti-metabolic and cytotoxic qualities, effectively fights inflammation.

A set of useful qualities determines the disinfecting properties of dead water. It is used to disinfect clothes, utensils or medical instruments. With the help of anolyte, wet cleaning is carried out indoors. It is useful to do this if there is a person in the room who is sick with an infectious pathology.

Anolyte helps with colds, diseases of the ears, nose or nasopharynx. For the prevention of influenza, you can carry out daily gargling with a remedy. In addition, the intake of dead water calms nervous system lowers blood pressure, reduces pain in the joints, prevents the formation of kidney stones.

How to make a device for living water

The device for live and dead water is quite simple, so its installation does not take much time and effort. For manufacturing you will need glass vessel, a pair of wires, a source of electricity and a piece of cloth.

To make an electrolyzer, a bag is placed in a glass jar, made from a piece of cloth that does not allow water to pass through. The fabric is fixed in such a way that it can be easily reached. Then take a pair of wires (preferably stainless steel). One is placed in a bag, and the other is placed in a glass vessel. To power the device, connect the wires to a DC source.

The electric activator will not work when connected to an AC power source. To convert alternating current into a constant, connect a powerful diode to the positive pole of the power source. With proper manufacture, the device will immediately begin the chemical process of water electrolysis.

Water preparation

The recipes for making living and dead water are simple. Plain water is poured into a glass jar with a bag. After that, the mechanism is connected to the mains. The device should work for 12-15 minutes.

After the mechanism is completed, living water is formed in the jar, and dead water is formed in the bag. Thus, it is possible to produce catholyte and anolyte quickly and practically without material costs.

Self-prepared products do not have too high biochemical characteristics. To prepare a better product, an electric activator is purchased in special retail chains.

Home use

Treatment of living and dead water various diseases carried out by taking liquid inside, washing or applying compresses.

Catholyte and anolyte are used to treat acne or other skin problems. To improve the condition of the epithelium, you should wash your face with living water 2 times a day. Do not dry your face after washing.

Wrinkled skin can be smoothed out with heated catholyte compresses. To moisturize dry skin, wipe the face with anolyte. 10 minutes after wiping, a compress with catholyte is made.

Once a week, it is worth wiping your face with a solution based on living water. To prepare it, stir in half a glass of catholyte 1 tbsp. l. salt and 1 tsp. soda. The mixture helps to smooth wrinkles and overall rejuvenation of the skin.

Dead water helps with rhinitis. To treat a runny nose, wash the nose with liquid 3-4 times a day. For young children, the remedy should be instilled into the nose with a pipette. The runny nose disappears the next day.

Catholyte can become an auxiliary medicine in the treatment of gastritis. With the manifestation of the disease, it is worth taking liquid for 3 days.

To prevent exacerbation inflammatory processes drink half a glass of funds 30 minutes before meals. This procedure reduces the acidity of gastric juice, which leads to a decrease in pain, an improvement in appetite and general well-being of a person.

From dryness and swelling of the skin during diathesis, you can use anolyte. First you should wash, and then you need to apply a compress for 10 minutes. The procedure is repeated up to 4 times a day. Unpleasant manifestations disappear a couple of days after the manipulation.

With the help of dead and living water, prostate hypertrophy can be treated. The treatment course lasts no more than 8 days. Half a glass of catholyte is consumed 1 hour before meals. Another 1 glass of liquid is drunk before bedtime. If there is no increase in blood pressure, gradually increase the dose to 1 cup before meals. During the treatment period, the sore spot is moistened with anolyte, after which a compress with living water is placed.

With prostatic hypertrophy, special suppositories moistened with catholyte are made from gauze. Already after 3 days of treatment, pain and the number of urination are reduced. On the 5th day, appetite improves, digestion normalizes. During treatment, it is recommended to walk in the fresh air. Re-use of therapies is recommended not earlier than 30 days after the completion of the previous course of treatment.

With various manifestations of allergies, rinsing the throat, mouth and nose with anolyte is carried out. 10 minutes after each rinse, you need to drink half a glass of catholyte.

Various redness and rashes caused by allergies can be additionally moistened with anolyte. After a few days of treatment, the manifestations of allergies stop. Sometimes a second course of therapy may be needed.

At present, to obtain healing water, it is not at all necessary to look for some mountain springs and reservoirs. It is quite possible to obtain it by electrolysis of ordinary tap water in. From a chemical point of view, living water has alkaline properties and therefore it is excellent for healing wounds. And dead water is a unique disinfectant because it contains acids. When passing through normal water electricity completely changes its structure.

Accordingly, after treatment with current, the water is divided into two fractions. Each has certain healing properties. It is usually recommended to use living and dead water in combination for maximum results.

Do-it-yourself apparatus of living and dead water

On sale, you can easily find special devices for obtaining activated water. But such a device can be made independently. To do this, you need to take an ordinary glass jar with a lid and fix the electrodes on it with nuts and screws. One of the electrodes will be the cathode and the other the anode. Dead water will be released at the positive electrode. This means that a bag of dense fabric must be fixed on the anode. For such purposes, calico is ideal. The main thing is that air passes through the fabric normally.

The real "living water" is not yet ready. Now it needs to be slightly frozen. When there is little ice on the surface, a hole must be made in it. Pour water through this hole into the prepared container. Ice can be thrown away, isotopes have accumulated in it.

Now you need to freeze the remaining water again. This time it should be about 2/3 frozen. At this stage of the preparation of "living water" it is necessary to pour out, on the contrary, unfrozen water. From the ice that remained as a result, and when melting, "living water". Drinking it is very beneficial for the body.