Although the kitchen is considered a non-residential space, the time spent here by all family members every day is measured in hours. Naturally, in a couple of years, the interior of the kitchen will want to change. Buying a new kitchen set, re-glueing the wallpaper or redecorating the floor are time-consuming ideas that will take a long time to implement. How to update the kitchen interior with your own hands?
Kitchen interior ideas # 1: changing the surface of the walls
The surface of the walls is a huge field for imagination. A plain wall in the kitchen is enlivened with stencils. Working with stencils is intuitive for any person. If you want to gently deepen the interior, then the wall is covered with a pattern that is in harmony with its main color. A contrasting stencil pattern will make the decor in the room original, but sharp.
There is another solution available: a kitchen wall with stickers. The assortment of stickers will satisfy any demanding buyer: mirrored, single and multi-colored, with or without a plot ... Therefore, it will not be difficult to find suitable stickers, as well as to stick them. Stickers and stencils can be attached not only to the painted wall, but also to the wallpaper. But you won't be able to peel them off without damaging the wallpaper.
Kitchen ideas # 2: affordable wall decor
Fashionable idea for the kitchen - wall decor, which is able to turn ordinary renovation into a designer one. For example, a laconic kitchen looks relevant, where the design of one wall becomes an interior accent.
An interesting idea that has become a classic in design is the art wall. It implies that the decor completely fills the wall. To make the kitchen design look stylish, it is necessary to select items that have a partially similar look or design style. For example, the composition can be as follows: a picture showing a lavender field, a herbarium: wildflowers under glass, plates in green and lilac tones, a small figurine of a rooster or horse. The kitchen where such items are placed evokes associations with the Provencal style.
Try using photos instead of themed compositions. To make a collection of different photos look whole, you need to choose a unifying element for it. For example, black and white photos famous masters, your family photos different years, photo of kitchen in retro style. If the photos in the kitchen differ in plot or style, then making them look uniform will turn out due to a similar frame.
Such a decorative technique as art wall has an important advantage. This kitchen decor won't get bored. After all, any element of the composition, be it a painting for the kitchen or a photo, if desired, change places or be replaced by other objects. A suitable art wall can be matched to any style of kitchen.
Kitchen design ideas # 3: DIY furniture
The appearance of furniture in the kitchen can be changed from minimal cost... It is realistic not only to change the style of the kitchen, but also to hide defects on furniture that appear over time - chips, cracks, scratches. Among simple ways- decoupage. Glued onto the prepared furniture surface special napkin... A painting or photo can also be used. To make the design not only original, but also functional, cover the resulting furniture decoration with two layers of acrylic varnish. It will protect a locker or drawer.
A simple idea of how to freshen up a kitchen set is to cover it with self-adhesive tape. But this procedure will have to be repeated at intervals of six months or a year, because on the end parts of the boxes and cabinets, the film quickly leaves.
If the kitchen is designed in country style, then you will be able to refresh the kitchen set by replacing its doors with small textile curtains. For the headset to remain functional, the curtains must be removable for easy maintenance.
The top cabinets will have a new look when the doors are removed. But on open shelves you should place decorative elements for the kitchen, not ordinary plates. Otherwise, such decoration of the kitchen will give the room a mess.
A kitchen cabinet that has lost its original appearance can be changed by repainting it. Some styles, for example, loft, grunge, provence, shabby chic, will also fit in with the careless coloring of the surface of the cabinets. Therefore, if your kitchen is connected with these stylistic directions, but you are not sure of your decorating skills, it is still worth a try.
The aged effect can be easily achieved by covering a kitchen cabinet or other furniture with two contrasting layers of paint and cleaning the top locally sandpaper... Be careful - for the cabinet or chair to look decent, you should wait until the paint is completely dry.
Kitchen interior ideas # 4: redesign appliances
A kitchen that lacks household appliances, for example, a refrigerator, or a microwave oven is nonsense. But they are often unjustly forgotten as a potential decoration object.
For example, the idea to do old refrigerator an original interior element can be realized by everyone. Old equipment should be sanded, degreased and primed. Then painting is carried out, drawing patterns on a stencil, pasting the refrigerator door photo ... It is better to varnish the technique for additional protection. After all, the kitchen is where drops of water or fat constantly fall on any surface, be it a sink or refrigerator.
A similar technique is used with respect to other types of technology. But do not forget that a small pattern or drawing on a large technique looks ridiculous, and vice versa. Then these objects and the kitchen as a whole take on a disharmonious look.
To make the kitchen look stylish and not overload its design, self-registration technology should not be combined with furniture renovation. Otherwise, the space will not look stylish, but tasteless. Remember to take precautions. In order for the kitchen to remain a safe zone in the process of updating the equipment, the appliances should be unplugged and make sure that their body is intact.
DIY interior ideas for the kitchen # 5: new textiles
Kitchen idea # 6: DIY small decor
- A useful item in every kitchen is a hot plate, which can be made in less than half an hour. You will need 30-40 pieces wine corks... Their lateral parts are glued to each other in a vertical position. The shape of the stand is determined according to your taste - it can be round or square. Additionally so small, but original craft decorated with ribbons or twine, which are tied around its perimeter.
- Even your small kitchen will not lose a single square centimeter of space if you place all the decorations in a vertical plane. Among the options available and pleasant for home owners are do-it-yourself kitchen fridge magnets. To make such a decor for a small kitchen, you need your favorite photo, a small piece of wood, glue, varnish and a magnet. The photo is glued to a piece of wood, the edges of which are better rounded off with a file, and this small composition is varnished. A magnet is glued to the back. The photo in a beautiful frame, which will always be in sight, is ready! Such an idea, if you hang a lot of photos, allow you to make a mini-gallery out of your kitchen. It is not necessary to glue a photo to the magnet - any beautiful gizmos will do: from papier-mâché fruits to seashells brought from vacation.
- To turn the kitchen into a room where family news is stored and transmitted, it is worth making a wall board for writing. Plank surface the right size covered with special paint for school boards and fits into a beautiful frame. To make the whiteboard even more comfortable and functional, attach hooks to the bottom of the frame to accommodate towels and other kitchen items. Do not forget to provide a place for a piece of chalk, with which you will write messages for your household. For these purposes, make a small shelf a couple of centimeters wide, fixed to the frame. Another option is to attach the chalk to a string that attaches to a nail driven into the frame.
- A plastic spoon chandelier is a simple hand-made version that is cheap to implement. A kitchen with such a chandelier looks out of the box, but guests will not be able to guess what the lampshade is made of right away. Handles are cut off from plastic spoons. The round parts of the spoons are glued to the surface of the large plastic bottle with a cut bottom. The placement of the spoons mimics fish scales, so the bottle will not be visible. In the lid you need to make a hole for the wire, and then also glue it round it with spoons. The spoon chandelier is ready! Paint it the desired color if necessary.
Kitchen storage idea # 7: use space efficiently
A kitchen is a room where there is always a lack of space, regardless of its size. Therefore, every storage idea will not be superfluous. To make the space under the sink, which is rarely used due to the placement of communications there, become more functional, place several metal pipes in its upper part. The pipes are fixed side by side in a horizontal position. This storage idea will allow you to use the space under the sink to accommodate household items. The containers are stacked on pipes. One pipe under the sink may be enough. Then household products having an elongated spray gun are suspended from it on a pipe. If you attach metal pipe into the space under the sink is problematic, then use a plastic curtain rod for curtains from the bathroom.
A convenient storage solution that will definitely come in handy in the kitchen is the magnetic board. It will be possible to place a lot of metal dishes on it in an upright position. If you can't find a magnetic board on sale, then your kitchen will also benefit from the presence of a perforated canvas. Small S-shaped hooks are inserted into the holes for hanging objects. If you paint the perforated canvas in the color of the walls, then the kitchen will take on an original look.
If the kitchen has already been renovated, but was not comfortable enough, then the idea of storage using wooden clothespins will help. To use the space on the inside or side of kitchen cabinets, carefully glue the clothespins where you want them. This storage idea will allow you to hang your kitchen textiles and a lot of different things - for example, towels, potholders, notes. Also, clothespins are glued to the wall. This storage idea frees you from the hassle of drilling holes and buying hooks.
Kitchen remodeling is almost the same process as renovating, only simpler and less costly. There is not always a financial opportunity to purchase new furniture, household appliances, change the decoration of the walls and ceiling. And sometimes you just do not want to part with old, but so beloved and good-quality things. Then experienced designers come to the rescue, who will help to radically update the interior with minimal costs. How to remodel a kitchen set with your own hands, how to transform a kitchen in the shortest possible time?
New life of an old headset
Furniture in the kitchen undergoes serious tests: grease stains, soot deposits, temperature changes make the set quickly lose its original attractiveness. In addition, headsets are used more often than other furniture, because a woman spends a third of her life at the stove cooking. They also love the cuisine because it is here that the family gathers at the same table, guests, friends and relatives come. Every housewife wants to feel at her best, so a sloppy interior, peeling paint, chips and cracks only bring disappointment. The situation can be corrected with the help of an external interior renovation. For the kitchen, reworking furniture with your own hands can be done in the following ways.
Facade painting
If the old kitchen is technically quite suitable for further use, then as a rework, you can simply refresh the facades with staining. Experts recommend choosing a car enamel that is resistant to mechanical damage, not afraid of moisture, sunlight and temperature extremes. You can also use acrylic or alkyd paint, but its duration is much shorter. Before starting the alteration, it is necessary to remove the facades, number them (for further convenience during assembly) and unscrew the fittings. Handles, hinges, it is recommended to hold them in a solution of water and soda, and then wipe them with a solvent.
From the old kitchen set made of wood or veneer, the previous coating should be removed: varnish or paint. To do this, it is necessary to grind the surface with sandpaper: first coarse, then fine-grained. If there are cracks, they need to be putty and the surface is leveled. After that, the facades should be degreased with a special solution and allowed to dry.
Now you can start painting the furniture with your own hands. Experts say that the paint from the spray can lays down more evenly, but this opinion is controversial. Regular paint brush will also do the job if the paint is applied in one direction. It is advisable to make 2 layers - then the color will be uniform, without pale spots. You can also use stencils to decorate facades with original designs or designs. After complete drying, the fittings are screwed to the doors, and the parts are put in their original place. Such an update of the kitchen will refresh the interior, make it more stylish and modern, besides, the price of a liter can of paint usually does not exceed 500 rubles, and for car enamels - 1000 rubles.
Self-adhesive film
Vinyl wrap - simple and a budget option remodeling a kitchen, the old surface of which can be both wooden and plastic: self-adhesive is suitable in both cases. Before you start reworking furniture, you need to measure the dimensions of the facades in advance and purchase a film with a margin so that you can correct possible mistakes.
The facades must be removed from the headset, numbered, laid out on the floor or on the table. Having measured the desired piece from the film, it should be applied to the edge of the surface and, carefully removing part of the protective coating, glue it to the facade. Further, the film is gradually scrolled and attracted, along the way leveled with a spatula or dry cloth. If bubbles form during the pasting process, they can be pierced with a needle. In case of irregularities, the film can be peeled off and leveled, but this should be done no more than once, otherwise it will quickly peel off from the kitchen set. After a few hours, the facades can be put back in place.
If appearance kitchen after alteration fully complies with the stated requirements, for convenience further use it is recommended to install new fittings. Old broken handles must be unscrewed with a screwdriver or screwdriver and go to a construction hypermarket or market. There, the detail should be shown to the seller to the consultant - and he will quickly select a suitable analogue.
The same goes for hinges, fasteners and other mechanisms. If the holes for the screws and the grooves become too wide, chips have formed on the surface and the fittings do not hold, it is recommended to restore the furniture with your own hands. All holes can be easily repaired with a filler. When it hardens, any screw or nail will easily fall into place and will hold firmly there.
Appliances
After rework kitchen furniture you can pay attention to household appliances. It is very good if it is built-in and hides behind the facades of the headset. Although the stove, which is most often used, is usually in sight, especially if it is gas. Before alteration, wash it thoroughly, remove all possible contamination. Chips and scuffs can be removed with heat-resistant paint. A very original solution would be to harmoniously combine it with the headset.
As for the refrigerator, it can be covered with vinyl. Of course, the new design of the alteration will not last long due to the instability of the material to mechanical damage, but at least every month you can change the appearance of the refrigeration unit. Auto enamel is more resistant, especially in a spray can. When coloring, it is recommended to choose apricot, peach, white, light gray shades.
By the way, vinyl film can be ordered according to the photo you like, then the refrigerator will acquire an original and unique design.
Finishing work
Do-it-yourself kitchen remodel is a simple and even exciting process, especially if all family members are involved in the work. It is better to entrust the replacement of electrical wiring, global redevelopment and transfer of communications to professionals, and you can independently refresh the interior with the help of wall decoration. To do this, it is necessary to remove the old coating, putty, level the walls and cover with new paint.
If you cannot make the surface perfectly flat, ordinary wallpaper will help to hide minor defects. It is recommended to paste over a free bare wall with a photo wallpaper with a 3D effect. Any room, thanks to a drawing with perspective, will only increase in volume. It is noteworthy that coloring together with leveling costs about 3,000 rubles, so this alteration option is very economical. Shattered or cracked old tiles? There is no need to remove all the old coating when it is enough to replace only the section that has failed.
- Kitchen doors can be freshened with staining. To do this, you need to clean the canvas and apply a new paint that will match the color of the interior. Another interesting option is wallpapering. They will adhere perfectly to PVA glue. You can also make the upholstery in faux leather. Glass sliding doors help save free space. The roller slide mechanism will allow the canvas to hide along the wall.
- Old wooden frames it is not necessary to change to metal-plastic glazing. To insulate the kitchen, it is recommended to install a regular sealant. Thanks to such sealing, the room will become more comfortable, drafts will disappear.
- Chairs usually need rework too. Frequent use loosens the base, making the object unstable and flimsy. Replacing fittings will help restore original condition... First, you need to tighten the bolts, if desired, replace. It is recommended to renew the old foam pad, the same goes for the upholstery. Using a hammer, nails or construction stapler the fabric is stretched and fixed on the underside of the seat. You can also sew removable chair covers yourself. The wooden stool must be sanded and painted.
- An old chest of drawers can also be used as an additional work surface or storage space. Give it stylish look a new tabletop will help. The surface can also be renewed using staining or decoupage technique. A new tablecloth will help to hide defects.
Show your imagination and do not be afraid to combine - for example, you can paint only the facade frames, and paste over the inserts with foil, or add decor to painted cabinet doors
Inlays for wood and painted facade frames
Renovating and restoring an old kitchen is not such a hard job: it only takes time, desire and creativity. For service you can take interesting ideas home improvement from the Internet or magazines. But, whatever the result, the kitchen will become fresher, more fashionable, and most importantly - more exclusive.
Video: how to paint the facades of a kitchen set yourself.
Video: how to properly cover facades with self-adhesive foil.
Buying a kitchen set is not always advisable due to financial costs... For anyone with minimal skills renovation works, the problem of how to update the facades of the old kitchen with your own hands will not arise. This will allow not only to save money on the work performed by the masters, but also to create your own personal design, which will become a decoration of a house or apartment. To do this, you should know several methods of transforming an old kitchen and choose the most practical among them. 
Similar articles:
If the kitchen set itself is strong, but there are significant deformations or chips on the outside, you can change the doors and countertop, leaving the "skeleton" of the kitchen unchanged. When ordering new facades, it is possible to change the style of the entire kitchen: classic rectangular doors - to smooth shapes protruding along the edges, which will give the room exclusivity and chic. To place an order correctly, you should measure the facades, sides and drawers. This is done with a ruler and a centimeter, laying the elements in a horizontal position.
But the disadvantage of this method is its cost. It is necessary not only to pay for the production of new facades, but also to buy the corresponding Consumables... You will also have to drill holes for the hinges yourself. To screw in the screws, use a drill with a diameter of 35 mm.
Use of decorative inserts
If it was decided to paint the doors or even completely replace them, decorative overlay inserts from wallpaper, self-adhesive films, ceramic tiles and rattan. As with gluing and painting, the canvas is laid horizontally and any dirt on the surface is removed.
It should be noted that the ceramics are fixed to the facade with tile adhesive, not for paper-based materials.
The peculiarity of installing rattan is that it must first be wetted, then cut and fixed on the facade of the door with framing wooden or plastic strips. Prepare the strips that will fix the rattan should be done in advance. Attention is paid to the edges, they need to be filed at an angle of 45 °. For work, you need furniture nails without hats, a hammer and acrylic varnish. Rattan looks beautiful if you place it not across the entire width, but only in the center of the front of the door.
Self-adhesive foil as a budget kitchen cabinet transformation
- a simple and economical option. For this you will need:
- the film itself;
- centimeter and ruler;
- sharpened scissors and a construction knife;
- plastic scraper for smoothing the film.
Free the doors from the fittings. Measurements are taken and marks are made on the centimeter grid on the back of the self-adhesive film. Neatly cut required size with a gap of 2 cm. It is necessary to start gluing from the center, gradually applying 5-10 mm to the edges of the facade surface. If it was not possible to level the formation of irregularities, the folds are trimmed, and the air bulges are pierced with a needle.
How to update wood kitchen parts
For finishing different surfaces you can use varnishes. This is a simple method for upgrading small parts. From an expensive type of wood, kitchen facades are expensive, but they will also wear out. It can be tinted, but this will significantly change the appearance, especially if it is oak rather than cheap pine material.
To do this, remove the selected parts by unscrewing the screws with a screwdriver, but they must be marked. It will also be possible to update the doors or individual elements of the kitchen set with the help of inserts, if they do not violate the overall design composition. You need to use the decor thoughtfully so that it is not clumsy.
Moldings, fittings and other decorations for the facade of the kitchen
Moldings and paint can significantly change the style of the kitchen set. To do this, use all the tools, as when painting the facade. The moldings are cut with a side saw to the required length. In this case, the edges of the slats can both touch and be of different abstract lengths on each door. For fixing, you need wood glue. Then the surface is primed and painted. For both cases, a spray gun is used.
Decoupage has become a popular kitchen upgrade method. A drawing, ornament or picture is placed on the facade, fixing it with varnish.
Thanks to the decoupage technique, you can decorate walls, tiles near the sink, and other surfaces in the kitchen to make the decor complete and complete.
What do you do with old furniture?
Updating kitchen facades is the right choice when the budget is small, but the result is high-quality If your kitchen furniture is intact, but already pretty tired, then do not rush to spend money and buy a new set. You can do it easier - to update the facade of the kitchen with your own hands. At first glance, it may seem that this is a very complicated procedure. But, following all the rules and showing all their accuracy, the restoration of kitchen facades will take place quickly and as efficiently as possible.
- Facade fittings
- Materials for replacing facades
- Facade replacement process
- Pasting with foil
- Rattan facades
Preparing to upgrade facades
To replace the facades of the kitchen, a standard set of tools is suitable, which, as a rule, is available in every home.
Before proceeding with the renovation of kitchen facades with your own hands, you need to prepare the entire necessary tool and materials. In order for the work to be successful, you will need:
It is important to consider: if even in the process of work you do not use some tools, they should be ready, so that later you do not have to waste time looking for them.
Facade fittings
Not a single kitchen furniture is complete without fittings, the quality of which determines the life of the furniture. That is why you should not save on fittings. And if you are going to update kitchen facades, then you will need:
High-quality fittings are the pleasure of using the new fronts of the headset, and this pleasure is just as important as aesthetic
When repairing or updating kitchen furniture, try to select fittings so that all elements correspond to the same style.
Materials for replacing facades
Facades are the face of the kitchen. That is why, as a rule, after replacing the old kitchen it is difficult to recognize
If you do not have the skills of carpentry, and you do not know how to update the kitchen facades with your own hands, then you can purchase ready-made products or custom-made products in special workshops. At the same time, it is important to take accurate measurements from old furniture, and after purchasing the material.
Best to use:
Wood is considered the most preferred material for those purposes when you need to update the facades in the kitchen with your own hands. This material is distinguished by its strength, durability, environmental friendliness, and has a solid appearance.
MDF is a wood fiber board conifers, obtained by a press under high pressure and temperature. Carrying out the repair of a kitchen unit, and trying to update its facades with our own hands, MDF can become an indispensable assistant. In work, this material is unpretentious, and its quality is always on top.
Facade replacement process
The process of replacing facades made of wood or MDF consists of several stages:
Renovation of facades with paint
Painting the facades is easy, and the result is a completely revamped kitchen. 
After painting the facades, you can try to update the apron in the same style.
You can update the facades of a headset in the kitchen using a method such as painting. This method of repairing old kitchen furniture can be called the simplest, but radical.
It is important to remember that painting facades is only suitable if wood flooring or the MDF coating is kept in good condition.
When repairing old furniture in the kitchen, using painting, you cannot do without the following materials:
Before repairing facades using a method such as painting, you must:
Using paint and stencils, you can add new details to the facades that will refresh the kitchen design.
After the repair of the facade is completed and the paint is dry, you can start decorating. You can use a stencil to apply the pattern. You can also use plant leaves, having previously opened with varnish. Such accessories will, by the way, look great on furniture made of wood or MDF.
After all the work on updating the facade is completed, you can screw the fittings into place and put the doors in place.
Pasting with foil
So that the kitchen set is not monochromatic and boring, you can cover only the lower part of it with foil, or the upper 
Films for facades are available not only in various shades, but also with imitation of wood or metal.
If you think about updating the facade of your kitchen, you can use a self-adhesive film. Such material is available, possesses good characteristics, and its range is amazing.
Stages of work:
- Before proceeding with the gluing, remove the facades and lay them on a horizontal surface;
- Remove all fittings;
- Next, wash the facades well with soda or soap;
- Wipe dry and degrease;
- After that, you can start cutting out the necessary elements from the self-adhesive film, having previously determined its color;
- The cut elements are placed face up on the facade and lifted from one edge;
- The paper backing must be peeled off and applied to the surface of the facade, gradually removing the paper from underneath;
- The film must be leveled using a spatula or a simple clean cloth, moving it from the center to the sides;
If small bubbles form during the process of pasting the facades, they can be pierced with a needle. If they are large, then it is better to cut them with a cutter and level them.
Rattan facades
Rattan can bring a sense of warmth and comfort to a kitchen interior. The most important thing in the process of decorating facades with rattan is to choose the right color that will be combined with the rest of the style.
Rattan is ideal for kitchens in retro style, country and their varieties
Inexpensive renovation of the kitchen facade (video)
Renovation or replacement of facades has recently become more and more popular. People understand that the appearance of their kitchen largely depends on the facades. And by applying some of the techniques for updating kitchen facades, they have a great opportunity to show all their imagination and independently make changes to the interior of their kitchen.
Russia, Moscow region, Moscow +79041000555
How to update an old kitchen set with your own hands: an overview of ideas, photos of successful solutions
It takes ~ 7 minutes to read
The old set is adjusted to the size of the kitchen, everyone is already used to it. But here's the trouble: the facades are dilapidated, the hinges are loose. It is safe to say that such furniture will last a very long time, if the plywood has not exfoliated or the chipboard has not swelled from getting wet. In this article, we will tell you how to update an old kitchen set with your own hands.
Save
Current repairs are carried out according to the plan:
- strengthening or replacing the hinges (sometimes the hinge has to be rearranged to the newly drilled nests),
- sealing cracks with subsequent painting, pasting with self-adhesive film,
- decoration of facades in connection with the new kitchen concept,
- complete replacement of the countertop or thickening it over the old one.
The set requires maintenance, repair. The main destroyer of kitchen sets is not time, but incorrect installation. A crooked floor leads to skewing of the doors, loosening of the fastening screws. Even before decorating the facades, all cabinets and cabinets must be checked against a horizontal plane.
How to glue a kitchen set with self-adhesive foil
The upgrade method is suitable for a laminate headset. Careful preparation of the surfaces will ensure a snug fit of the film.
Save
It is not necessary to start gluing right away, it is necessary to perform the following preparatory work in the exact sequence:
- We remove the doors, inspect against the light. Scrape off the bumps of dried fat, wipe it with acetone or white spirit;
- We put the exfoliated edges in place by gluing;
- We overwrite potholes fine sandpaper, remove the dust with a vacuum cleaner, apply a thin layer of acrylic putty. After drying, we sand it, prime it with construction soil.
- Deeply damaged areas should be cut out, outlining the place according to the pattern of the patch to be inserted. The insert can be a bottle cap, wood veneer, thin plywood. Then do the work from the above three points.
- The best fit will give varnishing. An important process for light film - every defect is visible on it;
- Bonding starts at the edge of the door (or along the edge of the drawer). Therefore, it must be clean and absolutely straight.
Calculating the area of the purchased film according to the area of the glued surfaces is not suitable. It is necessary to decide on a sample, based on its width, draw on paper every detail to be restored, on a scale of 1: 10. The cuts, onlays will be immediately visible and will not last long. We proceed from full cuts, we put up with the inevitable remainder.
Subtleties of the case
- The "wood texture" pattern horizontally and vertically on adjacent surfaces looks unnatural. It is better to choose a single direction for all facades.
- Granite chips require less preparation, but mother of pearl will give away any roughness.
- The film must be started from the wrong side, grabbing the top and bottom edges, leaving the side edges to finish.
- It is impossible to pierce the self-adhesive on the bumps with a needle: dirt and moisture will accumulate in the punctures, then the bumps will increase.
- Very jagged edges can be leveled by gluing a PVC construction corner onto them. The film will lie smoother from the corner. Placing even chips under the corner, you can adjust the distortion of the gaps.
Replacement of old furniture facades
We unscrew the old facades, remove them, measure the cabinet or hanging cabinet. We check the corners with a square. We eliminate the existing imbalances by laying corner clamps... It is only from the newly restored corners that the exact size of the new facades can be determined. For two door pedestals and cabinets, we subtract 3 mm from the width - for the convergence point in the middle.
Sawing a new laminate with a hacksaw is a bad practice. Fine-toothed only circular saw chips can be avoided at high speed. If home master undertakes to do everything himself, the recommendation is this: you need to remove the plastic with an awl under the metal ruler, go deep to the chipboard itself. The plastic is cut in two lines with an indent for the width of the cutting tool (usually 2 mm).
When without chipboard chips it is not possible to cut, the edge is not put on a tape, but 3D. It needs to be filed on a chair, giving a length allowance of 3 mm (the corners of the shield are hidden by an edge of this type). The same allowance - 3 mm - must be taken into account during cutting.
How to update old kitchen furniture with your own hands: painting, moldings
Those who decide to change the facades should pay attention to the excellent material - moisture resistant plywood. It is lightweight, strong even with through cuts, which is important for frame and openwork facades. In addition, in two layers of 8 mm, you can fold the thickness of 16 mm and not change the laid down dimensions of the old chipboard headset.
Save
The required thickness can also be typed with moldings. Semi-cylindrical, stucco, flat, classic ancient Greek mutulas - all these configurations, superimposed on a spectacular background, will bring clear lines, expressive style. The moldings create the effect of milled Victorian furniture. The weakest point of plywood - the edge - is protected with wood, for example, birch stationery rulers.
Plywood sheets need only a primer before painting. Previously painted chipboard facades do not need to be primed without damage. It is impossible to repaint the stained worn wood. But it can be painted with high-quality acrylic or pentaphthalic paint, tinted independently or in a centrifuge of a tinting center.
Painting Tips
- Between the wide moldings there is an expressive pearlescent acrylic lacquer applied with a rubber spatula.
- TO wooden floor a wood-like pattern with the same shade as the molding works well. The texture is painted with two colors - lighter and darker - with a flute brush with thick bristles using the “wet” method.
- Solid surfaces will not show streaks when airbrushed. Can be painted with a roller without stripes. The roller should be velor, and the painting is finished in one direction - rolling only up or only down on the facades of the entire headset.
- A beautiful marbling pattern made from glittering pentaphthalic paint. The background is rolled out like a roller. On a wet layer of several jars, paint spots with a brush - light, bright, with blackness. All - sharply different from the general background. The drops are reduced with a nylon plate cut from the container. You can mix for 15 minutes. Then the surfaces are not used for 48 hours.
Save
Decorative inserts
Flat plastic inserts, composite marquetry, carved volumetric ones, embossed from metal are a welcome decor, while observing a certain style. But you can define a unique new style. Decoupage found distribution, which became a total female hobby. It is famous for its environmentally friendly technologies. Overhead rondos, ovals, boutonnieres, corners and appliques are created, and sometimes the entire set is modified beyond recognition. The stylistic possibilities of decoupage technique are wide: from archaic to ultramodern techno.
Save
Decorating with ceramic tiles
Which modern master was the first to glue the remaining wall tiles on the facade - history is silent. But the traditions of using ceramics for decorating tables, artistic enamels on samples from the past are indicative. Of course, there can be no question of a layer of tile adhesive under such applications. Thin stripes, rhombuses can transform the headset, reliably protect the tree from external influences. The range is so high that it can complement any style.
Save
A few examples:
Style | Tile view | Tile options | Location | Mounting method |
Classical | Geometric constructions in the form of flowers, stripes | 6 x 6 cm, 10 x 10 cm, 12 x 12 | frieze (tape) under the worktop, on overhead fixed flanges like pilasters, single inserts on the doors | Sticker, under wooden slats with the selected quarter, behind the brass profile |
Painted majolica | 4 x 4, 6 x 6 cm | Rhombic diagonal order | Glued |
|
Ceramic with a thin layer of glaze, composite plaques | 6 x 6 cm, 1.5 cm - on the lines | On the doors in the center | Glued |
|
Glass, ceramics with a thick layer of glaze, not ornamental | Elongated shapes from 2 cm in width, mosaic | Horizontal and vertical chains, pronged as unfinished construction | On smooth surfaces |
|
Japanese minimalism | Glazed ceramics smooth and embossed | 5 x 5, 6 x 6, 10 x 10 cm | Vertical inserts between the strips of compound frame facades | On the glue in the groove |
Non-plot tiles with a thick layer of glaze, embossed | No more than 15 cm on the side | By smooth surfaces singly |
Single flowers are produced to decorate the facades. full height”, Rivets, nail heads and whole still lifes. Before gluing, any of the tiles is primed with back side, dried, only then glued to laminate or wood using assembly compounds. Glass mosaics on grids do not even need that - they fit right away.
Decoration with rattan inserts
Colonial, Oriental, Safari - styles that imply structural facades. Rattan weaving replaces glass, reliably protects facades from impacts. Moisture is absorbed by the palm grids without warping the surfaces. These qualities are extremely important for the kitchen. The assortment is also extremely wide: hexagonal weaving, cross-longitudinal, combined. Plus - all kinds of colors.
The cuts remain under the rails with the selected quarter.
But there are even more easy way rattan fastenings: with the wrapping of the seam edges to the inside of the door. To do this, you just need to soak the cut. When dry, the rattan stretches itself. This material should be approached creatively. The rich structure, pasted over all the time, can become intrusive. The rattan is beautiful between wide slats of split doors as an insert. In this case, the door slats can be straight, but it is even better when they have round, oval, hexagonal "windows". Curved shapes come in soft contrast to the crisp rhythm of the weave.
Renovation by varnishing
The sharper the smell of varnish, the more resistant it is to mechanical stress. Alas, a durable varnish without a pungent odor has not yet been created.
There are a lot of “combi” varnishes with a partial addition of certain substances: shellac, resin, drying oil, acrylic suspension. A wide variety is associated both with the goal of improving the compositions, and with various purposes. It is often necessary to re-varnish surfaces containing lecithin (converted fats). Nitrolacquer will no longer stick to this. In any case, varnishing is the most reliable way protect solid wood and paint on furniture. If you don't like a glossy shine, choose a matte composition. You can add particles for a spark, tint to taste (the transparency decreases from tint). By selecting the composition and mode of the nozzle of the spraying device, the varnish creates the effect of rain drops, bubble skin, silk, mica plates.
Some tips for varnishing:
- the first layer must be extremely thin, dry, it must be carefully sanded - a high degree of gloss depends primarily on this process;
- the varnishing roller should be made of fur resistant to caustic thinners, even before use, the roller is washed even with a new one, the strength of the bristles is checked;
- the same requirement for brushes;
- accidentally caught pile or bristles of the brush are quickly picked out with an awl;
- varnishing is carried out only in a clean room;
- in order to avoid splashes, the spray nozzle is tested first on the cardboard and only then the torch is transferred to the surface to be painted;
- with polyurethane tinted varnish transform ordinary glass into tinted glass;
- varnish with a small additive like "chameleon" becomes pearlescent.
Very important! Spraying any paints and varnishes, even acrylic, is extremely harmful to the respiratory system. You need to work with a respirator.
Energy drinks: give vigor, but take away health What will happen if you drink 4 energy drinks
Mustard for weight loss: how to use the seasoning with maximum benefit Is it possible for children to have mustard
The benefits and harms of mustard for the human body Table mustard benefits and harms
How to treat the ear after piercing: types of antiseptics, their composition, rules and features of the treatment of a pierced ear
Sistine Chapel in the Vatican: description, history, architectural features