Floor-mounted toilets have been out of competition for a long time, but things are changing. Owners modern apartments more and more people are opting for hanging models. Pleasure is not cheap, but this is practically the only drawback of such a solution. But among the advantages of the design is its excellent design and ease of maintenance.

It is important that the installation of the wall hung toilet is carried out in accordance with all the rules. We will tell you how and in what sequence the work is done, what devices will be required to fix the bowl. Based on our recommendations, you can do everything yourself or control the actions of plumbers.

House master can easily cope with the installation of a wall model, if you understand distinctive features her designs.

The visible element of such a plumbing fixture is the toilet bowl itself. Its installation on the wall is carried out in two ways: using the installation and on concrete base. In our article, we will consider both options.

The suspended model of the toilet bowl is more expensive than the usual floor version, but you can reduce costs if you install the product yourself

Strong and weak sides suspended type of plumbing are listed, which describes in detail the varieties and design specifics, provides guidelines for choosing the best model for you personally.

The design of the wall plumbing device can be conditionally divided into three main elements, which will be discussed further.

Reliable steel frame (module)

The frame is the main element of the entire structure, which is attached to the floor and to the wall of the bathroom. It is the frame that supports the drain tank and bowl. The quality of the subsequent operation of the product depends on its reliability. After the toilet is put into operation, the design will have to have a sufficient margin of safety to withstand the weight of an adult.

To secure the frame, you must have a solid foundation. Plasterboard walls cannot be considered in this capacity. The frame is equipped with a mechanism that allows you to vary the installation height of the toilet bowl in the range of 40-43 cm. To securely fasten the bowl, manufacturers recommend using strong pins made of steel.

In this photo, all three elements of the toilet bowl are clearly visible: a light blue frame, a gray-blue plastic tank with a flush button and a white bowl

The best models of support frames for suspended plumbing are listed, which we recommend that you familiarize yourself with.

Concealed cistern

The hidden fastening of this element, according to adherents of the wall model, is considered one of the advantages of the design. The material for its manufacture is a very durable plastic. To prevent condensation from accumulating on the surface, the plastic is treated with styrene.

The tank has a flat shape, characterized by a technological cutout on one side. This cutout is necessary for the device of the drain key. This hole has another purpose: it allows you to remove the fittings of the drain tank when performing repair work.

Another feature of the hanging cistern is the economical drain system that can be fitted to this model. Depending on the need, the drain dose can be 3 or 6 liters.

The bowl is a visible structural element

The bowl is chosen, as a rule, based on the personal preferences of users. It is in plain sight and should correspond to the general interior of the room. In addition, it must be easy to use.

It is the toilet bowl, as a visible structural element, that should organically fit into the interior of the room: it can even have a square shape.

Most buyers prefer an oval-shaped product. Although on sale there are round, rectangular and even square models.

Fasteners are part of the selected model and are part of its configuration. Additionally, you do not need to purchase fasteners for a wall-mounted toilet bowl. In addition, among the mounted models there are electronic control and numerous hygienic functions.

Intelligent types of sanitary ware with retractable nozzles for washing and drying, deodorizing and other actions need to be connected to the power supply. Their installation is complicated by connecting the power line and setting up the system:

Image Gallery

These long steel studs, which go through the holes in the frame and are attached to the wall, are necessary in order to securely hold the toilet bowl.

Connecting the necessary communications

First of all, we connect the sewer. For this connection, a black tap is used, which, as a rule, is included in the installation package. At one end, this outlet is fitted to the sewer pipe, and its other end is attached to the frame with special clips.

The water pipes must be located to the right or left of the module. Attach the pipe to the structure using the existing threaded connection. To connect the water supply, it is better to use copper or polypropylene pipes, and make the connection detachable.

Cold water can also be brought to the tank using flexible hoses. Such hoses are more profitable in terms of price, but their fragility should be taken into account. And when replacing failed hoses, you will have to carry out expensive repairs, so the option with pipes is still preferable.

Do not forget to check how securely the drain container is connected to the plumbing system. For this purpose, open the water supply tap. It is located inside the drain tank. After filling the container, all possible leaks are eliminated. This can be done without draining the water.

If, in the process of checking the correct connection of the toilet to the sewer or water supply, leaks are detected, they should be carefully eliminated

The sewer connection should also be checked. For this, a toilet bowl is put on the studs and a test drain is performed without final fixing of the structure. After that, the bowl is again removed and all identified leaks, if any, are eliminated.

Finishing work

At the next stage, you have to sew up a niche with a moisture-resistant drywall sheet, and then complete the finishing work. Please note that we need moisture-resistant drywall, because the usual one will quickly deteriorate under the influence of condensate.

For execution finishing works when installing a wall-hung toilet bowl with installation, it is moisture-resistant drywall that is used, which can be located in rooms with high humidity without compromising its quality

For cutting drywall, you need to use a template that should be included in the installation package. It will allow you to correctly cut all the necessary mounting holes without damaging the material.

After installing the moisture-proof sheet on its surface, you can fix finishing material. Most often, ceramic tiles are used to finish the bathroom.

Final installation steps

The installation of the visible part of the wall-mounted toilet can only be started after the tile adhesive has dried thoroughly.

The procedure for installing the toilet bowl:

• the outlet of the drain tank should protrude 50 mm beyond the wall surface: it must be adjusted to this size;
• they do the same with the pipe that leads to the sewer drain;
• both nozzles are installed on those intended for their place;
• on the studs that were fixed in advance, as well as on the branch pipes, they put on a large gasket, similar in shape to a truncated pyramid;
• the bowl is put on studs and branch pipes are attached to it;
• put in place rubber gaskets and plastic inserts;
• put on and tighten the fastener nuts;
• projecting parts rubber gasket cut neatly.

Now you can drain the water from the tank, thereby checking the operation of the sewer drain. The height of the wall-hung toilet bowl in relation to the floor can be adjusted by changing the position of the studs and retractable pins that are used to secure this element. It should correspond to the height of the visitors to the toilet.

The installation height of the bowl can be adjusted in the range of 40-43 cm, but the standard distance is 40 cm from the floor surface

The standard height is 40 cm, measured from the floor surface to the top edge of the bowl.

Mounting plate

The installation process is completed by installing the drain key. It is included in the basic package and can be mechanical or pneumatic. Usually this procedure does not cause any problems, since all the connections provided must already be brought to the surface of the wall.

Special pins are provided for the mechanical key, and tubes for the pneumatic key. It remains only to install this element in the place intended for it and adjust its position. Everything: the toilet can be operated.

Suspended model on a concrete base

The steel frame is expensive. In principle, you can do without it by building a concrete pedestal with your own hands, which will serve as a reliable basis for a wall-mounted toilet bowl. This option is considered the most economical.

The composition of the model scheme on a concrete base includes: 1 - two rods for fixing the toilet bowl, mounted in the wall; 2 - concrete base; 3 - pipe for draining into the sewer

With this installation method, the drain tank can either be built into the wall, while bringing the drain key out, or placed above the bowl of the plumbing fixture.

Preparation procedure for installation

Consider the option that is considered the least expensive. Prepare everything you need for work:

• concrete M200 - about 40 liters;
• boards for the manufacture of formwork;
• threaded rods (length 50-80 cm, thickness 2 cm) - 2 pieces;
• washers, nuts, wood screws;
• plastic pipe (diameter 11 cm, length 8 cm);
• drain sleeve;
• Styrofoam;
• silicone sealant.

I think it is worth repeating that the wall with which we have to work must be capital.

Step by step installation process

We fix the rods in the main wall, on the outlets of which the toilet bowl will then be mounted. Recall that we should get a stable and robust design capable of supporting a weight of 400 kg.

The next step is the installation of the drain coupling. At this stage, it is necessary to determine the height of the toilet in order to cut the sleeve to the appropriate length.

Now we need to install the formwork. In order to mark the fastening points on the formwork, it is necessary to determine the distance between the holes intended for fasteners.

To calculate the length of the rods, you need to add up the thickness of the recess, which is approximately 15 cm, and the distance from the wall to the toilet bowl. To fix the rods in the wall, concrete glue is used - a chemical anchor.

This is how the structure ready for the concreting process looks like: the place where the drain will be brought to the toilet bowl is covered with foam

When the formwork is installed, and the installation of the pins is completed, you should install the bowl in the place intended for it. Make sure that the mounting holes match the outlets, and the outlet matches the drain of the coupling.

The next step is concreting. It must be done by installing the foam in the place where the drain hole will be. Remember that concrete will finally harden only after 28 days.

After that, you can remove the formwork and make sure that in front of us is a monolithic concrete block with pins coming out of it and an open fixed coupling. A toilet bowl is mounted to the front of the block, and a tank is placed on the base itself.

This is exactly what it will look like wall hung toilet after mounting the bowl, and its tank will be installed on a concrete base

The procedure for mounting the bowl to a concrete base is no different from installing a floor-standing toilet. It is necessary to install the bowl on the pins, tighten the nuts, connect and seal the drain. Lastly, a drain tank is placed on a concrete base.

As you can see, this method of installing a suspended model is much cheaper and easier than working with the installation. But, to be honest, the result is not much different from the floor toilet.

Conclusions and useful video on the topic

The information you just read will be perceived much better if you supplement it with a video next to it. We invite you to watch the installation with a wall-mounted toilet bowl with an installation filmed on video.

The range of plumbing fixtures is expanding: toilet bowls are being improved, updated, and become more and more attractive. But modern models, as a rule, are more expensive than traditional ones.

Tell us about how you installed a hanging toilet in your house / apartment. It is possible that you know the technological nuances that will be useful to site visitors. Please write comments, post photos, share your impressions and ask questions in the block below.

When equipping a bathroom in a house or apartment, the owners often face the problem of how to “hide” unaesthetic communication nodes. In addition, they are occupied with the question of how to rationally dispose of useful space. There is an excellent option - installing a toilet installation that solves both problems.

The design for attaching a hanging toilet makes it possible to hide all communications and functional parts, including a flush tank. Using the installation visually increases the volume of the room. We will tell you how it is installed, how decorative masking is performed, how the plumbing bowl is then hung.

We have described in detail the process of installing support frames for wall-hung toilets and fixing them to walls and floors. Outlined step by step guides for mounting different types installations. The information presented for consideration was supplemented with visual diagrams, photo collections, video instructions.

The modern market of construction and related equipment offers two types of installation systems. Both options are convenient and practical, and the choice depends on which walls the structure will be attached to and which parts of it will have the main operational load.

Block installation- the simplest a budget option, however, certain conditions are required for its installation. You can use the structure only on the main wall, having previously prepared a niche in it for placing a tank and places for connecting to a sewer with a water supply.

The second option involves bricking the system with bricks, masking with drywall or other sheet materials followed by decorative cladding. These actions are performed only at the end of all installation activities.

Strong anchors are required for fastening. They bear the main operational load. The main advantages of the model include a reasonable price and the ability to use the installation not only complete with hanging, but also with stationary floor toilets.

A block installation can be “drowned” in a niche made in the main wall, and in this way save the usable space of the bathroom

Frame installation belongs to a more complex type of construction, but makes it possible to fix the toilet on thin hollow partitions or plasterboard walls. Considered very reliable system and has all the characteristics to hold both the plumbing module and itself.

Placed on the floor or foundation. Allows several mounting options: with special elements to four points of the wall, to two points on the floor and two -on the wall, or only to the base of the floor by means of stable paws. The main load goes to the bottom of the base.

The main advantage of the frame installation are the adjustable legs. They are exposed to any desired and convenient height for themselves. The design is suitable for installation in rooms of non-standard shape, easily fits into the most unexpected design and can be located even in the corner without hiding the useful space of the bathroom.

The frame installation allows you to place the toilet in any place that is most convenient for you and does not require the presence of a main wall for installation.

Dimensions of block systems are always standard. Their width is 50 centimeters, the depth varies from 10 to 15 cm, and the height does not exceed 1 meter. Frame installations have a base base width of 50 to 60 cm, a depth of 15 to 30 cm, and a height (due to adjustable legs) of 80 cm to 1.4 meters.

For wooden houses or non-capital buildings, experts recommend buying the widest and lowest systems possible. This makes it possible to reduce the load on the walls and ensures the normal functioning of the module for a long time.

Image Gallery

Add site to bookmarks

• Kinds
• Choice
• Mounting
• Finishing
• Repair
• Installation
• Device
• Cleaning

Installing a wall hung toilet

Wall hung toilet

Consumers are increasingly choosing wall-hung toilets for bathroom equipment. Of course, installing a wall-mounted toilet is a bit more complicated than installing a conventional floor-standing toilet in an apartment.

Before you install a wall-mounted toilet with your own hands, it is advisable to have an idea about its design.

At the heart of the whole structure is a rigid steel frame supplied by the manufacturer. special device for height adjustment. This frame is securely fastened to the floor and to a wall built of concrete or solid brick. Such equipment cannot be attached to drywall false walls. The toilet bowl is suspended from a steel frame on special pins. The toilet bowl is the visible part of the entire structure after installation.

Built-in cisterns for wall-hung toilets differ from ordinary ones in that they are made not of ceramics, but of plastic. Their depth is 9 cm, and the width is different. The plastic drain tank is additionally insulated with styrene - a material that protects against the formation of condensate. The drain tank is placed on a steel frame. The front part of the tank is equipped with a special cutout through which the push-button device for draining the water is mounted.

During operation, this opening provides access to the mechanism for repair and maintenance in case of replacement of defective parts. Modern models equipped with the function of dosing the volume of drained water using buttons. By clicking on one, 3 liters are drained, and on the other - 6 liters.

Before installing a wall-hung toilet, make sure you have necessary tool and material.

Since different manufacturers have different equipment, it is better to first buy a toilet, and then buy all the necessary materials for its installation and connection, recommended by the manufacturer in the instructions. For implementation installation work you need to prepare:

• drill;
• drills for concrete;
• a hammer;
• screwdriver with nozzles;
• adjustable wrench;
• FUM tape (to seal the thread);
• core;
• corrugation for sewer pipe;
• building level;
• sheets of double waterproof drywall.

Back to index

Toilet installation

Fastening scheme: 1 - Rods for fastening; 2 - Monolithic concrete base; 3 - Pipe.

Installation begins with the installation of a steel rigid frame (installation), which must be firmly installed and fastened with dowels to the main wall and to the concrete floor. At the installation site of the toilet, a sewer pipe with a diameter of 110 mm should be removed. It is necessary to provide for the supply of a water pipe.

The installation should be installed exactly relative to the horizontal and vertical planes, for this the building level is used. Installation is very easy, because the steel frame has retractable rods, as well as special studs for attaching the frame to the wall.

The height of the bowl can be adjusted according to the height of the people who will use the sanitary ware. Optimal Height installation of a wall-mounted toilet bowl can be selected empirically. It is usually done in such a way that the seat is approximately 40 cm from the floor.

The next installation step is to connect the outlet of the wall-hung toilet to the sewer outlet, while using a corrugation. To check the performance of the connection, "bait" the bowl on the frame and make a control drain. Then the bowl must be removed, since its installation is carried out at the very last moment.

Then the place of installation of the frame is sheathed with sheets of double waterproof drywall, which is directly attached to the installation and to the wall metal profile. The instructions supplied with the hanging equipment by the manufacturer have a template for easy cutting of the front part of the skin. Its use facilitates the process of cutting the necessary technological holes in the drywall sheet.

After that, work on the surface cladding is carried out. ceramic tiles, matching the color of the overall interior of the bathroom.

After the tile adhesive is completely dry, the toilet bowl is fixed by hanging on 2 studs. They are wrapped in metal carcass installation system, which is located under the cladding.

Back to index

Features of the installation of a hanging toilet

Device diagram a simple toilet for comparison.

1. All installation systems for connection to sewer pipes are equipped with nozzles with a diameter of 110 and 90 mm and an adapter for connecting to a plumbing fixture.
2. The installation itself uses a pipe with a diameter of 90 mm to make it easier to obtain a small bend radius.
3. The flush button is installed in the center of the front or top panel of the tank. In the event of a breakdown, by removing this key, you can access the internal fittings of the toilet bowl. Usually the key is not included in the kit, but sold separately.
4. In the event that the float mechanism fails, in order to prevent leakage of water in the tank, a built-in drainage hole through it, excess water is discharged into the toilet.
5. Almost all modern tanks of modular systems are equipped with a water saving function. It can be represented by two options: a double flush key (the larger part of the key is a full flush, the smaller part is an economical flush); Push / Stop system, which allows you to independently adjust the duration of the drain (when you press the button again, the drain stops, and if you do not press it again, all the water from the tank will drain).
6. For high-quality tiling, it is necessary to correctly set the location of the installation system relative to the facing joints. So, the drain tank button must be placed either in the center of the tile joint, or in the center of the tile (otherwise there will be unaesthetic asymmetry). Therefore, the installation is installed with an allowance of 2 mm, and the laying of tiles always starts from the button.
7. When using a mechanical drain key, the thickness of the wall that closes the structure should not be more than 6-7 cm.

Lately the usual floor standing toilets are increasingly being replaced by suspended structures. They involve placement in a smaller area, and also have a more modern appearance. Therefore, the process of displacement of traditional models by them is quite natural. However, following current trends has its negative sides - more complex installation, longer and more expensive. However, you can successfully get out of the situation if you learn how to install a hanging toilet with a do-it-yourself installation.

Design features

Before proceeding directly to the installation, you should understand the design. Installation of a wall-mounted toilet bowl will become much easier when its structure and principle of operation are known. It will immediately become clear how to act correctly and what is needed.

The main feature of the product is that only the bowl remains in sight.

The basis of the whole structure is a solid metal frame. The visible part is directly fixed to it. It is from this element that all installation work starts. The frame must be firmly fixed to the wall and be stable on the floor. As a result, it should easily withstand an adult. Based on this, we can say that fixing the frame to a weak wall will not work.

The frame has an element that allows you to change the height of the bowl, which is attached using special pins. They are the main fasteners when installing the toilet installation.

A common option for attaching two installations at once is a toilet and a bidet.

The second element is a plastic drain tank. He also hides in the wall. It has a specific shape, because. should be placed in confined space. The tank is also installed in a metal frame and is insulated with a special material that prevents the formation of condensate. On the front wall of the tank there is a cutout for mounting a drain button. Modern models, including floor-standing ones, have a dosed discharge of water - 3 or 6 liters.

The next element is the toilet bowl. The only part that is visible and in active use. Possesses traditional form, but in separate designer models there are original configurations.

The package contains all the necessary parts and accessories. The attached instructions are also able to show the entire installation sequence of the toilet installation.

Advantages and disadvantages

Toilets-installations have the following advantages:

• Attractiveness and aesthetics;
• Minimum dimensions that allow maximum use of free space in small rooms;
• Missing legs and support simplifies the cleaning process;
• Versatility of design, providing a choice to taste and budget;
• Rarely occurring breakdowns, and in case of occurrence - not a difficult repair.

The disadvantages include the high cost. Taking into account the peculiarities of installation with the need for additional work, the installation price can exceed up to 2 times the price of placing a floor counterpart.

But given the growing popularity, manufacturers have organized the release of relatively inexpensive models that are becoming available to a wider range of consumers.

Another disadvantage is the presence of hidden elements that are not very accessible for maintenance and repair.

Niche preparation

Installing a wall hung toilet involves using a niche to accommodate the frame. As already mentioned, a certain strength of the walls is necessary for fastening. The design of the installation can withstand a weight of up to 400 kg, part of the load from which is transferred to the wall. This issue must be approached with particular care.

In order to place the installation, it is necessary to prepare a niche. It should be the following:

• Height - 1 m;
• Width - 0.6 m;
• Depth - up to 0.2 m.

In some cases, it is problematic to create such a depth. In such cases, it is necessary to go deep to the possible value, and hide the remaining elements with plasterboard panels.

By hiding the main part of the device, certain opportunities open up for decorating and improving the interior. It’s not worth just placing the installation near the wall and sheathing it with GKL, because. placing a conventional toilet will be cheaper and easier. In addition, it will take up less space.

Installation installation

Installing a do-it-yourself toilet installation on a special frame fixed to the wall is a more expensive process, but faster and more reliable. The installation will be fixed to the floor and a solid wall.

The technological sequence is as follows:

1. Fixing the metal frame. It has corresponding holes with which it is fixed to the surfaces with dowels. Two points for fixing to the floor and two to the wall. Sewer and water pipes are connected to the installation site. The installed frame must be checked for evenness with building level. It is necessary to maintain exact parallelism to the wall being installed, because even slight distortions can lead to interruptions in operation and even breakdowns. Horizontal adjustment is carried out using wall mounts that change their position.

This stage also involves setting the height of the hanging toilet. It will depend on the height of the residents, usually 0.4 m. The height of the bowl can be adjusted in the future.

2. Leading to the drain tank of water. You can use a flexible or rigid system. Professionals often use hard, because. she can last longer. Flexible hoses can also be used, but if they fail, it will not be possible to get to them and replace them quickly. During the installation of the liner, the valve valve of the tank, as well as the drain from it, must be closed.

After connecting, check the reliability of the connections. To do this, open the water supply and start filling the tank. If there are leaks, they are fixed. Water may remain in the tank.

3. Connection to the sewer. The toilet drain hole must be inserted into the outlet of the sewer pipe using the appropriate corrugation, but some models can be connected without using it. At the end of the connection, check the tightness of the system by test drains. To do this, you will need to temporarily screw the bowl to the frame. After that, remove it again, it will be installed in the final installation.

The correct connection of the sewer pipe must be performed even before the installation is started. Pipe diameter - 100 mm. It must be laid with an appropriate slope. You can read about it in the corresponding article.

4. Closing with plasterboard sheets. Installation of a wall hung toilet must be accompanied by decorative trim functional elements. To finish the bathrooms, you must purchase a waterproof double drywall. It is more durable than normal. Sheets are required to be mounted to metal profiles and directly to the toilet frame. The installation manual must contain the necessary information on the cutting method, indicating the points for cutting holes.

Sheathing can be done in two ways: over the entire wall area or only along the installation plane. The second method involves the formation of a small shelf above the bowl, which can be used to place the necessary items.

Subsequently, the installed barrier is finished with tiles or panels together with the rest of the area of ​​\u200b\u200bthe room.

5. In conclusion, it is necessary to install the toilet on the installation, namely the bowl. It should be hung in the appropriate place using two fasteners.

6. Last, most a simple step is the installation of a flush button. They are pneumatic and mechanical. The process is not difficult, because. everything should already be connected to the required opening in the wall. The mechanical button is installed using special pins with their subsequent adjustment. For pneumatic, you only need to connect the appropriate tubes, everything is ready.

In the process of activity, it is necessary to especially control the process of mounting the installation frame,because the course of further installation will depend on the correctness. Figuring out how to install a toilet installation is actually not difficult. It is enough to follow the recommendations of the installation instructions, and in addition to watch the corresponding video about the process, and you will succeed.

The combined bathroom and toilet rooms are comparable in terms of the cost of repairs and the purchase of plumbing to the re-equipment of the kitchen. They buy quality modern materials and products. The wall-hung toilet set with installation has surpassed standard floor-standing designs in popularity due to its compactness, original installation system and ease of use.

How to choose an installation for a wall hung toilet?

Retail outlets offer a variety of products from Russian and foreign manufacturers. Installation hinged system in the toilet saves space for washing machine, sinks, boiler. There is an additional area for decorating the room. But before you buy an expensive product, you need to familiarize yourself with its qualitative and quantitative characteristics. Without studying the installation instructions for a wall-mounted toilet bowl, various troubles are possible for installation - from water leaks to a complete failure of the device.

The device is a metal frame on which plumbing is attached. There are installations with a hanging toilet bowl and a button. Another option is an automatic flush without a separate button. When choosing between them and a floor toilet, first of all, you need to pay attention to the dimensions of the products. The former stand 100-150 mm closer to the wall than the latter with a tank. Strictly regulated dimensions do not exist. Each manufacturer produces products based on the needs of the consumer.

Second important point- performance of the flushing system. Habitual plumbing in this regard is not always reliable. It is characterized by the following problems:

• the occurrence of the button;
• float failure;
• weak water pressure;
• valve clogging.

The modern design is more reliable, so manufacturers give a ten-year operational warranty without fear of failure. The system may break. There is no access to it, since it is covered with drywall or tiles. Engineers took this into account and created a shutter release button.

The advantages of a wall hung toilet with installation are:

• reduced fluid flow while maintaining flow power;
• pneumatic actuated button activated by means of an air pressure system;
• the noiselessness of the tank, hidden behind the wall and foam.

Ease of cleaning is an important factor in the operation of a suspended structure. A bathroom with a tank is often placed in a secluded place. Therefore, the approach to it is difficult. Difficult to wash reverse side products, corrugated drain hose, it is inconvenient to shut off the water supply tap. The suspension system is free from all these problems. The apparent unreliability of attaching the wall-mounted toilet to the installation is erroneous. According to technical data, it is able to withstand a mass of up to 0.5 tons (average weight of a person is 70-80 kg).

Read also: Stainless steel sandwich chimneys: design, installation features, dimensions

The only disadvantage of a wall-hung toilet with an installation is its price. It is several times higher than that of a conventional bathroom. In Moscow, you can buy a wall-mounted toilet bowl with an installation kit at a price ranging from 13,000 to 25,000 rubles. Taking into account the daily water consumption, operating costs, the durability of the structure, it must be assumed that expensive products will pay for themselves faster than a floor product. The cheapest product is not equipped with a flush button. Its cost is from 11 to 12 thousand rubles.

The disadvantage of installations is the difficulty of repair in case of water leakage. Therefore, which hanging toilet with installation is better to choose , the buyer decides. First of all, you need to pay attention to the manufacturer. The ranking of hanging toilets for the toilet is headed by several companies. Among them:

• Geberit;
• Grohe;
• Cersanit;
• Tece;
• Villeroy & Boch.

The main difference between products from different manufacturers is the presence of a water release button, which can be designed in a traditional form or equipped with touch controls with innovative odor removal. The frame may include a carbon filter device. Grohe has added a backlight key. Models with two buttons for descent of different amounts of water are sold. One delivers 3 liters and the other 6 liters.

Installation costing from 6 thousand rubles involves the use of low-quality metal fittings, pipes and seals. Such a frame may soon deform, sealants leak. Therefore, such “savings” will lead to even greater losses in repairs, not only in your apartment, but also in the one located on the floor below.

How to install a wall hung toilet with installation?

According to the type of fastening, the technical product is frame and block. Last option includes a flat tank, a drain button and fixing elements. The bathroom is isolated on the floor or wall. The advantage is a lower price compared to a frame structure. The disadvantage is that the block must stand on the main wall. Drywall, foam block or brick partition in one brick will not withstand the load. For zoning the area, a frame type of fastening is suitable. A corner installation for a wall-mounted toilet, a free-standing partition, a niche for a cistern with water supply lines - all these are options for the frame.

Read also: Water floor heating system: materials and components, do-it-yourself installation

TECE launches a reinforced installation for a wall-hung toilet. Special strength and rigidity are obtained due to the double frame. Geberi has improved the support of the structure. In terms of cost, they are about the same. Installation can be carried out even on a non-main wall, or when there is a large distance from the partition to the toilet due to heating and water pipelines passing through the floor. A practical example for a combined bathroom and bathroom is a frame universal installation of a hanging toilet (pictured).

The dimensions of such a product are not regulated by the rules. It is assembled based on specific planning conditions. Individual nodes may be located in different parts premises, i.e. where it is convenient - in the corner, below, behind the partition, and even in different rooms.

The block system is less universal. It can only be fixed to the main wall. Repair, replacement of defective parts, installation of an additional structure are difficult tasks. However, standard dimensions of bathrooms have been developed that correspond to the height of a person in the “sitting” position. The width of the system is between 300-400 mm. The depth and height of the installation for a wall-mounted toilet bowl, respectively, are 500-600 mm and 300-500 mm. Insignificant differences in height dimensions are provided for people different height. But they do not cause much discomfort when using.

Do-it-yourself wall-mounted toilet installation

Installation of equipment does not require special knowledge and skills, the use of complex tools. But if there is no experience with adjustable wrenches, sealing materials, then it is better to seek help from professionals.

You need to start by taking measurements from the floor surface to the edge of the frame pipe, taking into account the height of the bowl, but not more than 400 mm. If the height is greater, then you can reduce it by adjusting screw device. The standard installation width for a wall hung toilet is 500 mm. The most common variant with a size of 10 mm.

The level checks the position of the system horizontally and vertically. The frame should be fastened at the same distance from the wall at the main points where holes are drilled and dowels are inserted. Then proceed to the connection of the sewer pipe, the supply of water to the drain tank. The plumbing and the tank are connected by a stainless steel tube. Rubber hose is not suitable for this purpose. It is imperative to provide in the place of liquid supply before cistern installation of a faucet. It is needed to immediately shut down the system in case of depressurization. For sewerage, polyethylene corrugated pipes are used. Then the frame structure is attached with its connection to the water supply. All communications after installation are checked for tightness by repeated draining of water.