Recently, along with traditional heat-insulating materials, it has been in high demand. When coating surfaces, the substance simultaneously acts as effective insulation, waterproofing and attractive facade paint, covering the walls with a uniform polymer layer.
One of the most effective in protecting concrete, metal, brick structures is ultra-thin. Moreover, the material can be applied both to internal and external surfaces, since its components are absolutely safe for health.
Manufacturer
Thermal insulation Bronya is produced by the Volgograd Innovation Resource Center. VIRC has vast experience in the development of high-tech thermal insulation materials.
All products offered by the company are distinguished by official certification, guaranteeing excellent quality and highly effective results.
Noting the manufacturer, one cannot fail to mention the optimal price-quality ratio.
Heat insulator brands
The manufacturer presents several basic options for a liquid heat insulator.
Bronya Classic is a versatile insulating agent that is ideal for processing traditional coatings.
Withstands high temperatures up to 200 °C.
Effective in isolating metal surfaces.
It can be applied directly to materials that contain signs of the development of corrosion processes, and without pre-treatment with anti-corrosion agents.
Facade
Bronya Facade - reliably insulates the premises from the inside, without interfering with the full circulation of air, which helps to avoid the appearance of rot, the formation of fungi.
Armor Winter
The mixture allows you to isolate objects at low temperatures down to -35 ° C.
Composition
Liquid thermal insulation includes the following components:
- acrylic binders;
- a composition of fixatives and catalysts;
- special additives, the presence of which contributes to the creation of protection against the development of corrosion, the appearance of fungus;
- ultra-thin ceramic microspheres filled with rarefied air.
The presence of such a combination turns the liquid insulation into an extremely light, pliable substance that reliably covers surfaces. In terms of consistency, liquid Armor is in many ways reminiscent of ordinary armor. facade paint. However, after complete hardening, it forms an elastic polymer coating, which has high insulating and anti-corrosion properties.
Material qualities
Bronya thermal insulation prepared for use has the appearance of a viscous, relatively thick substance. The main part of the substance (about 80%) is formed by air-containing ceramic microgranules. In combination with acrylic polymer binders, the granules create a viscous mass that can be diluted with ordinary water, while creating a moisture-impervious, light and durable film.
As for the heat transfer coefficient, here this indicator is not more than 0.018 W / m2. At present, this is a record characteristic for liquid heat-insulating materials.
Insulation Armor practically does not absorb moisture. Its absorption rate at full content insulator in water during the day is a meager 0.02 g / cm3. This quality shows how effective this substance is as a waterproofing agent.
The material is not combustible, and due to its complex chemical structure, insects and other small pests do not spoil it.
Liquid thermal insulation has excellent adhesion. The material effectively covers any surface: brick, concrete, wood, metal, plastic and even glass. The fully cured heat insulator transforms into the thinnest film, which, despite the meager layer width, reliably protects objects from thermal energy losses.
Another important point is the ease of application of the insulating base. You can cope with the task with the help of a conventional brush, roller, spatula or sprayer.
As for the consumption of a liquid heat insulator, in laboratory conditions this indicator is equal to one liter per 1 m2 when the substance is applied with a layer of 1 mm. Depending on the presence of certain conditions, the thickness of the insulating coating may vary.
Parameters
The technical parameters of the material are as follows:
- Appearance - homogeneous, smooth matte surface white color.
- The resistance of the material to the effects of temperature changes is in the range from -40 to 60 ° C.
- Duration of operation of the insulating layer when processing metal, brick, concrete surfaces under conditions temperate climate(on the example of Moscow) - about 15 years.
- The water vapor permeability coefficient is 0.003 mg/m2.
- The maximum allowable operating temperature of the insulating coating upon reaching short-term peak performance is no more than 260 °C.
- The density of liquid thermal insulation at room temperature is 600±10% kg/m3.
- Hydrogen index - from 7.5 to 11 pH.
- The mass fraction of volatile substances is about 40%.
- The time required for complete solidification of the liquid heat-insulating layer at room temperature is no more than 24 hours.
- The level of adhesion to concrete, metal, brick surfaces is in the range from 1.3 to 2.2 MPa.
- The resistance of the insulating coating to the effects of water, 5% alkaline solution at room temperature - appearance and the properties remain unchanged.
Applications
Liquid insulation Bronya is highly effective in insulating various designs. It is used for the treatment of roofs, floor coverings, facades, internal partitions and load-bearing walls window slopes, steam pipelines, ventilation, hot and cold supply pipelines, cooling systems, all kinds of plastic, metal, glass containers.
Laying technology
The dimensions of most coatings and the non-standard, complex architectural component of modern buildings increasingly lead to the impossibility of effectively using traditional heat-insulating materials both inside and out. For example, carefully isolate hinged facade using mineral wool, especially if housing is located above the second floor, not everyone can do it.
With the advent of liquid thermal insulation Bronya, the situation has changed dramatically. The substance effectively fills any gaps in structures, while creating a coating, the thickness of which is some 2-3 cm.
To create a durable, and most importantly, reliable insulating coating, the liquid substance must be applied only after special coating preparation procedures have been followed.
Application of insulation
Ideal tools for high-quality, effective application of liquid thermal insulation are airless sprayers and soft brushes. During the application of the preliminary layer, no more than 1 mm of the substance is laid. The use of a phased economical approach contributes to the optimal consumption of thermal insulation, eliminating the formation of layers.
Work can be carried out at surface temperatures ranging from -35 to 150 ° C. Temperature regime in each case depends on the type and properties of the treated surfaces, as well as the brand of insulating substance.
Immediately before applying the finished mixture, it is worth once again mixing the insulating base in the container. If it is necessary to achieve a rarer consistency, a small amount of distilled water can be added.
Finishing
After the completion of the layer-by-layer application of the liquid insulator and the complete solidification of the substance, you can proceed to the final surface treatment.
Having dried up, the thermal insulation Bronya resembles a coating in the form acrylic paint. Therefore, not wanting to spend extra time on facing surfaces, the walls can be left as they are.
If there are enough forces and opportunities for decoration, in this case, a variety of Decoration Materials. As practice shows, a plaster layer is perfectly applied to such thermal insulation, ceramic tile, wallpaper.
In any case, the service life of the Bronya liquid insulator, due to its strength and ductility, is decades. This, in turn, avoids the execution finishing works for a long time.
Anecdote was completely out of place. Although, jokes can be applied as you want and to whatever you want. In general, it was during some kind of war there.
Our country supplied one of the warring countries with surface-to-air missiles. After the first use, an urgent message was received from buyers: "Thank you for the surface-to-air missiles. They hit the air perfectly. now please send the surface-to-air missiles." This is what I mean, no matter what they say, paint, this is paint, it is not mineral wool and not some kind of Ursa. Because of the effect that we get from heaters, it is naive to expect from paint. Still, not those characteristics. But the use of such paint in one’s own (in this case, mine , the household showed that she completed her task and continues to perform.So, I'm starting over..
It looks like a putty, well, or a paste. at first it is a paste, or cream, applied quite easily on any surface. After hardening, or drying (an amateur, how to call it) hardens. It is better to apply with a spatula or a flat scoop, a brush, it practically does not work. The minimum layer of application is six millimeters, if you can apply more, then the heat will be better preserved. The surface on which you will apply this insulation paint should traditionally be prepared, that is, cleaned and degreased, then this paint will hold better and longer. As for the composition, there is a lot of everything. 
The means of protection against the penetration of cold are microgranules, between which there is air, hence the heat-saving effect is achieved. And of course, this paint contains a fixative so that this, so to speak, construction does not crumble. If you believe the characteristics of the paint, described in detail in the instructions for use, then it can withstand temperatures from minus sixty to plus two hundred and sixty degrees Celsius. It can be used for both outdoor and internal works.
1) The application thickness is not more than six millimeters, it does not take up much space.
2) Easy to apply to any surface.
3) Adheres superbly and lasts a long time.
4) Serves long enough - up to fifteen years, sometimes longer.
5) For its application, it is necessary to have a minimum number of tools.
6) Sufficiently low consumption. (If you still use a brush or a spray gun, then the consumption decreases even more).
7) Possibility of drawing at any temperature, in the range specified above.
8) Easily soluble in water (if thick, distilled water must be applied).
I know four types of such paint-armor: the classic one, that is, without any tricks there, costs about four hundred rubles per liter, the Anticorrosive word speaks for itself. The advantage is that in some cases, it can also process an uncleaned surface. Its price is about ten rubles higher than that of the classics. Paint-armor, such as Winter. This word also speaks for itself. Effectively used in the cold season. It costs more than classic. forty rubles per liter. And finally, the last type of paint-armor, Facade. It is most effective just for outdoor work and insulation of buildings. Its price is one-on-one with classic paint. Such are the things. In fairness, I can say that I used only the last type of paint in my household. It was about four years ago, I covered a makeshift hut in the country with this paint. There are no complaints.
I found three of them. The first is, of course, the price, which is somewhat high. The second is the relatively long drying time. And the third is that, no matter what is said there, it is undesirable to work at sub-zero temperatures.
Video review
| All(5) |
|---|
The modern range of heat insulators is not only foam sheets or mineral wool rolls. The choice has now increased significantly, replenished with a mass of innovative materials.
An excellent example is the coating type thermal insulation called "Armor".
Product Features
Russian scientists have developed a new way to insulate rooms - Bronya thermal insulation. By external signs, this insulating material resembles ordinary white paint, which, after drying, forms a dense elastic polymer structure.
The composition of the product is as follows:
- acrylic components;
- fixatives and catalysts;
- ceramic components-microspheres;
- anti-corrosion and anti-fungal additives.
Filler "Armor" are glass, ceramic and polymer balls, inside of which there is air. The binder is acrylic components or latex. The composition of additives varies depending on the scope of the heat insulator: fire protection, antiseptics, and so on.
The scope of the material is the most extensive:
- facades of buildings;
- roof;
- floors;
- window slopes;
- pipelines;
- steam pipelines;
- various containers, tanks;
- metal surfaces.
The advantages of the material are the following properties:
- high adhesion with any surface;
- anti-corrosion protection;
- heat blocking;
- condensation protection;
- quick repair in case of damage to the thermal layer;
- protection from the sun's rays.
This material, which is called thermal paint, creates a unique thermal layer. The innovative coating ensures the preservation of the premises from the loss of thermal energy, without taking up space in space. The thickness of the insulator is no more than one millimeter!
The operating temperature of this material covers the range from -60 to +250 degrees. That is, this thermal coating can be applied even in frost. The strength of the material, depending on the operating conditions, is enough for a long time - from 15 years and more.
The insulator is applied using conventional painting tools- roller, brush or spray. After drying, it forms a durable elastic layer with high thermophysical characteristics.
The consumption of thermal insulation "Bronya" does not depend on the modification, but on the state of the working surface and the method of application. As a rule, with a coating of 2 mm, a liter of material per square meter is consumed. However, the material of the working surface also matters: concrete or metal.
A concrete surface of a vertical level takes 10% more than a liter, and a metal surface - 5%.
Material types
Products are divided into the following categories:
- "Classic".
- "Anticor".
- "Winter".
- "Facade".
Insulating material "Classic" (429 rubles per liter) is used as the base composition for application to any surface. "Anticor" can be safely applied to a surface covered with rust, removing the "loose" part.
In order to save money when protecting rusted pipelines, Anticorrosive is first applied, and then the Classic base composition is applied.
The composition "Winter" (480 rubles per liter) is made specifically for work in cold weather. Thermal paint withstands temperatures up to -35 degrees without losing its properties. It should be noted that other types of "Armor" are applied at temperatures up to +5 degrees.
The composition "Anticor" can be applied to any rusty surface. The price of ultra-thin thermal insulation "Bronya" with anti-corrosion properties is 392 rubles per liter. To prepare the surface, it is only necessary to remove the loose element of corrosion with a brush.
The composition "Facade" (400 rubles per liter) has unique characteristics vapor absorption. Any fumes from the living space pass through the coating and are removed to the outside. Also, the insulator prevents icing of buildings, the formation of condensate and mold.
To buy thermal insulation "Bronya" of any type means to ensure the temperature balance in the room and block heat loss.
How to choose?
If you are going to purchase Bronya thermal paint, you need to determine the scope of its application: building facades, pipelines, roofing, etc. The nuances are as follows: 
- To cover galvanized materials, it is recommended to buy the Isollat modification. This composition is able to eliminate corrosion on the rusted material itself, as well as prevent its occurrence. Before applying thermal paint, it is necessary to cover the surface with a primer layer.
- To work with hot pipes, the composition "Bronya classic", "Korund classic", "Keramoizol" is used. These modifications are used both for conventional coating and for the "sandwich technology" method. This method involves a four-five-layer surface coating with alternating liquid heat insulator with fiberglass.
- Work in winter period requires the purchase of modifications "Armor Zim", "Korund Zim" or "Akterm Nord". These compounds have performance characteristics similar to those of Bronya Classic. The only restriction in use is excessive humidity. Moisture should not exceed 80%.
- For thermal insulation of facades, the modifications "Armor facade", "Termolat-facade", "Korund facade" or "Akterm facade", "Isollat" are used. The composition of the composition "Isollat" includes substances that have a "washing" effect. That is, dust and dirt are washed off the facades during rain.
- To protect buildings from fires, the modifications "Akterm fireproof", "Akterm NG", "Korund Volcano" are used. The composition includes fire-retardant components that can withstand high temperatures up to +4,350 degrees.
Mikhail, 45 years old, Syzran:
Thermal insulation Bronya — modern material for warming objects of various purposes. In structure and method of application, the substance resembles paint. On the market you can find products with similar properties: Astratek and Corundum. Unlike other types of thermal insulation, Bronya brand paint will not hide space. According to the characteristics, a thin layer can replace a mineral wool board up to 50 mm thick.
Ultra-thin liquid insulation protects metal surfaces from corrosion, helps to reduce heat loss from the room. It can be considered a universal option that combines the properties of heat-insulating and paintwork materials. Liquid Armor is the result of the development of Russian scientists. The product was presented by the Volgograd Innovation Resource Center. Composition:
- acrylic binder;
- catalysts;
- clamps;
- ceramic microspheres, characterized by ultra-thin walls, they contain rarefied air.
Auxiliary components are special compounds that protect metal structural elements from corrosion, and concrete surfaces from fungus and mold. Insulation Bronya has a liquid structure, the consistency resembles paint.
Product color is white. This is super thin insulation. With its help, structural elements from different materials: concrete, metal, etc.
Thanks to the polymer base, the coating becomes elastic after application, which allows it to withstand deformation processes and a small tensile load. Ultra-thin thermal insulation Bronya is used as a heater due to rarefied air, which is inside the microspheres. Main characteristics:
- the thermal conductivity coefficient is much lower than that of most analogues, and is 0.001 W / (m * C);
- thermal insulation paint Armor can be used at high and low temperatures: from -60…+250°С;
- does not harm a person, since the composition does not contain highly toxic and volatile compounds;
- fire and explosion safety;
- impact resistance aggressive environments, liquid thermal insulation Bronya can come into contact with alkaline mixtures, saline solutions.
Due to the properties of the insulation, it lasts a very long time. The average life of its operation varies from 15 to 30 years. The mixture is called Ceramic Armor. It can be paint, liquid mixture, etc., but the structure is the same.
Application area
Due to its excellent characteristics, Bronya insulation is used everywhere. It is used to protect buildings inside and out. The material is used in the process of insulation of communications, insulation of wires, etc. The scope of the mixture is quite wide:
- Protection of vertical and horizontal structural elements of various buildings (floors, walls, ceilings), roofs.
- The possibility of insulating a residential building and large-sized objects, poorly heated premises (hangars, warehouses, workshops).
- Thanks to special additives, the mixture of liquid Armor is characterized by anti-corrosion properties, it can be used on any metal surfaces.
- Protection of communications of any type from freezing (water supply, sewerage, heating and air conditioning systems, gas and steam pipelines).
- Insulation of the main components of the heating and hot water supply system: boilers, boilers, heat exchangers of various types.
- Oil pipelines, which are located below and above the soil level.
- Thermal insulation of this type is quite suitable for refrigeration equipment.
- Insulation of water storages and tanks for chemical reagents.
- The Bronya mixture is used to protect wagons (railway, metro) and tanks from heat loss.
- Thermal insulation of ships, boats, yachts and boats ( internal surfaces, engine room).
Advantages and disadvantages
When choosing a material with which it will be possible to influence the intensity of heat outflow, it is recommended to study the properties and reviews. To highlight suitable option of the coatings offered on the market, you should pay attention to the positive and negative qualities product. The advantages of a liquid mixture produced under the Bronya brand include its following properties:
- thin layer of coating;
- universality;
- ease of use;
- the coating does not lose its properties in extreme cold and heat;
- high efficiency;
- the coating does not weigh down the structure;
- excellent adhesion to various types of surfaces;
- the material is non-hygroscopic;
- resistance to UV radiation;
- to be repaired;
- sufficient level of strength.
The material has many advantages. There is a variety of mixtures of this brand:
- for operation in winter;
- plaster compositions, etc.
Various types of products are designed to protect objects with different characteristics. This means that each of the options is suitable for operation under certain conditions. Provides a significant level of material efficiency.
The disadvantages include high cost. You can buy compositions of various types, which are produced under the Bronya brand, for 350-1000 rubles. The price is for 1 liter of liquid. Despite the fact that the material is allowed to operate at a temperature of -60 ... + 250 ° C, insulation work can only be carried out if the air temperature is above zero. Recommended conditions: +7…+150°С. If you plan to isolate the object for the winter, it is better to do this long before the onset of frost. The disadvantages include drying time. It is allowed to continue work one day after coating.
Operating principle
Heat can be transferred in several ways:
- Convection.
- Thermal conductivity.
- Thermal radiation.
Each of the options is characterized by different principles of heat distribution:
- liquid, gaseous medium
- kinetic energy of the smallest particles
- electromagnetic radiation.
In any of the cases, 2 types of body are involved: one of them is heated more strongly, the other is weaker or completely cold. Interestingly, the insulating material of the Bronya brand to some extent combines 3 methods. The main share in the composition is microspheres filled with rarefied air (80%). The remainder of the binder generates heat through its thermal conductivity property.
The surface receives a share of heat due to the process of convection, radiation. If we take into account that air is contained inside the microspheres, the heat loss will be small. This is the most suitable (after vacuum) medium that can be used as an insulator. Thanks to its low heat dissipation intensity, the material helps to keep desired temperature object.
Overview of coating types
Before choosing a mixture, it is necessary to determine the tasks that are planned to be solved with its help. Different materials have been created for different conditions. Accordingly, they may differ in properties despite having a similar structure. Product range:
- Bronya Classic is universal composition, which is considered the base. It is used for various purposes and is characterized by all properties thermal insulation material Armor. It is offered in capacities on 5, 10 and 20 l.
- Armor Standard / Standard H — a budget option mixtures. It is offered at an affordable price, has a standard set of Bronya thermal insulation properties. Provided at the lowest cost good protection from heat loss. Such a mixture is most effective when it is necessary to isolate communications and containers. The Standard NG option is a non-combustible type of material.
- Antikor. Thermal insulation, which is applied to a rusted surface, but it is first recommended to remove the loose layer.
- Insulation winter. The composition can withstand low temperatures down to -30°C. It is applied in any weather conditions, even if it is winter outside.
- Paint Facade is a universal mixture, however, it is recommended to use it on objects where it is important to ensure vapor permeability. Due to this property, thermal insulation of this type is often used to protect facades.
- Light. The main intended purpose is the fine finishing of internal and external surfaces of various types of objects.
- Fire protection is special compound, the action of which is aimed at increasing the fire resistance of buildings.
- Universal and Universal NG - an option similar in properties to a mixture of Classic and Standard. With relatively low price protection levels are high.
- Metal is a simplified but effective version of the Anticorrosive mixture. Offered at a low price.
- The wall is another variety that was created as an analogue of more expensive materials. Such a mixture in properties resembles the Facade coating. Another variant of the Wall NG is proposed. It is characterized by fire resistance in addition to the main parameters.
- Nord, Nord NG - a cheap analogue of the Winter mixture.
- Anticondensate PRO- effective protection against moisture on surfaces different type. It is usually used in the repair of equipment, thermal insulation of communications.
After studying the range and reviews of each of the options, they acquire a suitable mixture. It is important to know that these materials are ready for use. however, sometimes you need to add a little distilled water. It is only allowed to mix the composition at a mixer speed of no higher than 200 rpm, otherwise the likelihood of a violation of the insulation structure increases. Before starting work, you should watch a video about the ongoing work on applying Bronya thermal insulation.
Armor is a liquid heat-insulating paint Russian manufacturer, consisting of acrylic polymers, ceramic microspheres, flame retardants, fixatives, catalysts and other additives. Thanks to its microporous structure, it covers the surface of any shape and material with a thin and dense layer of 1 mm. As a result, the insulation does not create an increased load on the structure. Bronya liquid insulation can be used both outside and inside the premises, since all its components are absolutely safe. All products of this series have numerous quality certificates and guarantees.
By appointment it is divided into the following types:
- Classic (universal);
- Facade;
- Anticorrosive;
- Winter;
- Fire protection.
1. Classic.
Paint Classic is used for coatings made of various materials(plastic, metal). Lightweight, well stretched, matte color, lays on the surface with an even film layer with a white tint. Most often, Bronya Classic brand liquid insulation is used for cooling and heating systems, walls, roofs, floors, containers (containers, tanks), trailers, water supply pipes, steam pipelines. Does not support combustion (charring occurs at +260°C), does not emit dangerous substances, resistant to constant temperature changes, corrosion, precipitation and mechanical stress, also does not allow air and moisture to pass through. The service life of paint on metal or concrete surfaces can reach 15 years, and can withstand temperatures from +200 to -60 ° C.
Facade - provides an ultra-thin coating of thermal insulation, and also has the following properties:
- low coefficient of thermal conductivity (0.0012 W/m°C);
- excellent waterproofing and adhesion to the surface;
- high density;
- vapor permeable;
- does not draw in water;
- viscous, uniform color;
- prevents the appearance of condensation, the growth of mold and fungi;
- does not slip and is quickly applied.
Used for walls both inside and outside, windows, balconies, slopes, attics, facades and much more. The manufacturer recommends using Bronya Facade paint for surfaces made of brick, wood, and concrete. For a warming effect, 1 layer 1 mm thick is enough.
3. Anticorrosive, Winter and Fire protection.
The main purpose of the ultra-thin thermal insulation Anticor Bronya is to protect the metal surface from corrosion. Moreover, you can apply directly on top of rust, most importantly, remove all exfoliating parts (with a spatula, brush). The characteristics of Antikor allow it to be used in places subject to aggressive influences, for example, acids, alkalis, salts, and the like. Surface covered with heat-insulating paint Anti-corrosion armor, not destroyed by ultraviolet rays. Use of insulation is allowed at temperatures from +150 to -60°C. Often, Classic is applied on top of it to reduce consumption.
Bronya Zima series paint is designed specifically for operation in cold conditions. So, specifications thermal insulation allow it to be applied at a temperature of -35 ° C on outdoors, unlike the products of other series - only above + 7 ° С. It is used for construction, reconstruction of buildings, fences, concrete and metal surfaces. Insulation Bronya Zima does not let water through and is resistant to alkali. Fire protection is a liquid insulating paint designed to increase the amount of time fire resistance of steel structures. Without ultrathin thermal insulation, the fire resistance limit time does not exceed 45 minutes, and with it it reaches 120.
Overview of the advantages of Fire protection paint:
- low consumption;
- easy and fast installation;
- service life up to 30 years;
- use together with other isolations of the Bronya series is possible.
Before coating any surface, it is necessary to thoroughly clean it of dirt, oil stains, repair potholes and cracks, and then wait until it dries completely. All this will significantly increase the adhesion of thermal insulation Bronya with the material. The paint is applied with a roller, brush or airless sprayer. The average drying time is 24 hours. It is recommended to apply a layer of no more than 6 mm, since a larger amount will not affect the thermal insulation properties in any way. Water is added to the suspension only in extreme cases, for example, during long-term storage.
Average consumption - 1 liter of Bronya insulation per 1 m2 (with a layer 1 mm thick). The amount of insulation required will vary depending on the surface to be painted and the application density required. Judging by the reviews of experts, it is better to always calculate with a margin, for example, for metal, increase consumption by 5%, concrete - 10%. The temperature of the material to be coated must be between +150 and -35°C. Thermal insulation before application should be thoroughly mixed to the same consistency. It is recommended to store only in a hermetically sealed container in a dark room from +40 to -40°C. Transportation is allowed in any way.
User Reviews
“We decided to purchase liquid thermal insulation from the Bronya company after we got acquainted with its characteristics. At first, I didn’t really believe that due to such a small layer it was possible to achieve a good warming effect, and the price alerted me. Roof insulation used country house. It is applied easily and quickly, and what’s more good is that you don’t need to have any special skills in this work. Now we can say for sure that it has become noticeably warmer in the attic and in the house, after that all doubts were immediately dispelled and we are not sorry for the money spent.”
Oleg Podvarsky, St. Petersburg.
“I was looking for insulation for a balcony and came across this insulation. I was surprised by the excellent characteristics of the Armor, so I decided that it was better to look for reviews about it first. Found only positive, negative never got caught. Immediately decided that it is best to buy this thermal insulation. I painted completely myself, and it turned out very quickly. A year later, the thermal insulation still looks like new, and it is always warm on the balcony. In general, I am very pleased with the result."
Alexander Kotov, Rostov-on-Don.
“They insulated a small office with Armor. Thermal insulation was applied with a layer of 1 mm. As a result, all dampness and mold on the walls completely disappeared. After everything was dry, wallpaper was pasted. All work was carried out easily and without problems, and, importantly, the space of the room did not decrease at all in comparison with insulation with plates or rolls. In addition, the paint is fireproof and non-toxic.
Andrey, Volgograd.
“Buy liquid thermal insulation of this company was recommended by colleagues at work, and I had heard it before positive reviews about her. I covered the pipes in the boiler room with a layer of three millimeters, it took quite a lot of paint, but they are always cold, now there is practically no loss of heat.
Kirill, Moscow.
Price
Price table for liquid thermal insulation:
| Name | Volume, l | Price, rubles |
| Winter | 10 | 4800 |
| 20 | 9600 | |
| Classic | 5 | 2000 |
| 10 | 4000 | |
| 20 | 7900 | |
| Facade | 5 | 2200 |
| 10 | 4300 | |
| 20 | 8600 | |
| Anticorrosive | 5 | 2400 |
| 10 | 4700 | |
| 20 | 9400 | |
| Fire protection (volume in kg) | 6 | 2700 |
| 14 | 6300 | |
| 25 | 11300 |
Another important advantage of Bronya is that, thanks to a thin layer, it is easy to replace the damaged part of the structure, unlike roll or tile insulation, which will take a lot of time, effort and money to dismantle and restore. To all this, she is not interested in rodents and does not require mandatory laying of a topcoat on top of her. The heat loss of any building is significantly reduced, and, accordingly, the cost of heating it. In addition, due to the uniform and inseparable layer of thermal insulation of Bronya, the possibility of the appearance of cold bridges and the penetration of moisture under it is completely excluded.
Chantilly Castle - the second in France after Versailles Chantilly Castle how to get from Paris
Amusement park "The Land of Legends Theme Park" in Turkey
Holy places in Greece. Greece Orthodox. Pilgrimage to the feast of St. Nicholas
Picodi: All discounts in one place!
How to get to Dolmabahce Palace