Interesting crafts from plastic bottles. Multi-colored caterpillar from plastic bottles

14.06.2019

A plastic bottle is not just an ordinary waste (garbage), it is a decor option, with its skillful use. Bottles, depending on the liquid stored in them, vary in shape, color and size. These features will allow you to make interesting crafts from plastic bottles for giving with your own hands.

massive buildings

Plastic bottles are used in this case as a substitute various materials all kinds of structures. They can replace bricks and even slate. To give the necessary strength, the bottle is covered with sand, and in order to achieve a certain shape, pressing and scissors are used.

Gazebos, greenhouse buildings

The essence of the building is PVC installation products using fastening materials in the form of wires or ropes. In the end, when using sufficiently strong frames, worthy supporting walls come out for any structures.

Enclosing elements

The principle of crafts is the same as in the paragraph described earlier. It is also possible to decorate an existing fence or gate with plastic bottles, cutting them, and gluing mosaics.

Sheds

The structure can be used by you as a shelter from the rain. You can hide not only yourself, but also leave a car or equipment. For the construction, you need to install a solid frame, on which bottles are attached with wire.

Water heater

With the right construction and combination of containers, you can make an outdoor shower, the water of which will be heated in bottles under the influence of sunlight.

plastic furniture

Bottles can be used to make outdoor benches, chairs, and even sofas that can be upholstered for more comfort.

Plafonds for lamps

Use plastic bottles that are not heat-affected. You can make a ceiling of any shape and color, depending on the design of the summer cottage and the requirements.

Flower pots

Usually bottles act as containers used for primary planting, but with skillful processing, you can get beautiful pots and pots.

Flowerbeds from plastic bottles

By giving the bottle physical processing in combination with other fixing materials, such as stones, you can mount an exquisite flower bed and, if necessary, paint over the resulting products.

birdhouses

Hanging products from bottles for bird feeders are made literally in a couple of cuts at the base of the bottle. With additional processing, the feeder can look quite aesthetically pleasing.

home decoration

All kinds of animal shapes, lanterns and even curtains can be made with a skilled hand.

boats

With a certain number of bottles and a couple of video tutorials, you can make your own boat and go fishing.

Playgrounds for children

It is possible to cut figurines, slides, for plant lovers - artificial palm trees, flowers and much more.

Children's bottle slide

Land cover installations

animal figures, aircraft and much more. The most popular crafts and instructions for making them are described below.

Swans-planter

To make original design in the form of a swan, we need a certain number of large bottles (approximately 5-6, depending on the size of the bird), as well as:

copper wire or any available metal;
putty (finish);
metal grid;
tight material (bandages, gauze);
knife (for shaping);
spatulas of various sizes.

bottle swan

Step by step production:

Cut a large bottle lengthwise, do not try to make two identical halves, this is completely unnecessary for crafts. The approximate shape as a result of such an operation should resemble a voluminous flowerpot. Next, pour in wet sand in order to achieve the desired deformation of the bottle.
We fasten the wire to the lid, having previously made a hole in it. To facilitate this process, you can use a heated nail or a hand drill. The wire will become the neck of the bird in the future. We throw the diluted putty on the prepared polyethylene bedding with a layer of 5-6 cm. Place a bottle of sand on the resulting kind of foundation, which was discussed in the previous paragraphs. Using a spatula and mortar, give the body of the swan the desired shape.
Give the wire a curved shape resembling a neck. Fasten the knurled putty ovals onto the wire and secure everything tightly with gauze or bandage. The transition from the base of the swan to the neck should not be abrupt, otherwise the design will turn out to be unaesthetic. At the end of the wire, make a head out of putty, adding eyes and a beak.
We attach a metal mesh to the body with a solution and get wonderful wings. A solution is applied to the mesh and the result should be wings of the shape you have chosen. The process is quite painstaking, so be patient and strong. Using spatulas, shape the curves inherent in the swan.
After drying, sand the resulting product with emery. The next step is to prime the bird and paint, remembering to draw all the attributes of the swan's face.

cacti

Enough original idea and very easy to install. With the help of wire we make the base of the cactus and fix it in the ground. After, we dress the bottles of the required shape and color.

Cacti from plastic bottles

Flowers

To make plastic flowers, we need to have:

knife and scissors;
bottles of the required shape and color;
paints and varnish for finishing works.

Step by step manufacturing instructions:

Cut off the top of the bottle. Next, make a few cuts to the base with scissors. One strip should be wider than the next three, as it will represent the petal, and thin strips will play the role of stamens.
Strips with a large width are cut with scissors, giving them a sharp shape. Thin strips are twisted with a knife and bent down.
Petals - wide strips are painted with green paint or varnish.
The stand is made from the remaining material by cutting the bottle in half, not reaching the bottom 4-5 cm. The middle of the bottom remains intact. Give the workpiece the appropriate shape and place on the ground.

Owl from discs and bottles

Necessary materials:

bottles of different sizes (2 x 5 liters and 40 x 2);
special glue (epoxy);
self-tapping screws for fastening;
discs and beads for the eyes;
knife and scissors;
styrofoam for framing.

Manufacturing instructions

The outlines of the future face are organized by cutting it out of polystyrene, also take places for the eyes. With the help of packaging from tablet batteries, we make eyes. Inside the empty package we place the beads and pour epoxy glue there. After drying, the eyes are attached to the head. If desired, ordinary CDs can be glued in front of the beads, which will give the eyes a more interesting look.
Having chosen a dark-colored bottle, a beak is cut out of it, which is then attached to the head in the right place. The rest of the bottle is not thrown away, you can make feathers out of it. After cutting, the feathers are glued along the counter of the eyes. Eyelids are cut out of the remaining plastic, which, when glued, should overlap the attachment points of the feathers.
The next step is making the wings. Taking a large bottle, organize a frame for wings from it, pre-cut feathers from a two-liter bottle are attached to it. By gluing the feathers, you must close the mouth of a large bottle. Then, in several rows, attach smaller feathers, and bend the last row with a knife over the base of a large bottle.
Using the second large bottle, make the base for the owl's body along with the back of the head. The body is glued with feathers in several rows, as are the wings. The part on which there should not be feathers is the back, everything else is covered with feathers in random order.
Using self-tapping screws, we fasten the resulting parts (head and wings) to the body of the owl. Before that, glue the back of the head with cutouts from the middle of the bottles. The joints are also glued with feathers. After fixing all the details, paint the owl in the desired color.

bottle pig

Necessary materials:

bottles different sizes(one 5-liter and 4 one and a half liter);
aracal the color of the future eyes and nose;
nails for fastening;
knife and scissors;
paints or markers;
pen or pencil;
paper.

Manufacturing instructions

One and a half liter bottles are cut diagonally so as to get rid of the neck. The cut off part will serve for the hooves in the future. Draw the eyes, ears and nose on paper. Using a marker, move the drawn outline to the aracal. The part of the bottle left after the circumcision is used to organize the ears. From any bottle, cut the tail and give it a twisted shape with a knife.
After marking the places for future attachments for the ears, hooves and tail, use a preheated nail to make holes. Details at the attachment points are notched and at the joints the resulting edges are bent for greater strength.
The last step is painting the piglet. After it dries, glue the eyes and nostrils. Paint the hooves black. The piglet is ready, you can install it in a flower bed or anywhere in your summer cottage.

palm trees

Necessary materials:

bottles desired color(green and brown);
knife and scissors;
copper wire or rod.

Manufacturing instructions:

Cut the bottle in half, make cuts in the shape of teeth on the top. Prepare as many blanks as possible, as palm trees should be large.
A metal pin or thick wire is attached to the ground. It is necessary to take care of the reliability of fastening so that the structure does not fall in the future.
Plastic blanks are strung on a pin and bent over for a more natural structure of the palm tree.
Green bottles are needed for branches and leaves. With the help of scissors, the bottom is cut off, and the rest takes on the necessary shape with the help of cuts. The shape of the leaves can be any, it all depends on your imagination.
The last stage is fixing the leaves on the pins and connecting all the details into a common design. In order to fasten everything together, you can use welding or ordinary harnesses, which can be purchased on the shelves of any hardware store.

flowerbeds

Necessary materials:

cement and sand;
crushed stone or gravel;
a tire or a barrel cut in half;
bottles (can be glass).

Manufacturing instructions:

Install the blank in the place of the future flower bed.
Prepare a solution (mix cement with sand in a ratio of 1: 2, gradually adding water).
Coat the workpiece with a solution (the layer must be sufficiently dense) and insert the bottles with their necks into the solution. When inserting bottles, follow the checkerboard pattern.
After hardening to the bottom of the workpiece, pour gravel or slag to organize drainage. After, fill the flower bed with earth. The design is ready, now you can plant it with any flowers of your choice.

Crafts from the bottom (bottom) of the bottle

The bottles are cut (the lower halves are taken for work). The color scheme can be any according to your taste. After organizing the mound of soil so that it turns out to be a slide desired diameter, blanks from bottles are stuck into it. With a dense arrangement of bottles and the right color, original plastic buildings are obtained.

Ladybug from bottles

Decorating country beds

In order not to waste time on solid plastic crafts, you can simply decorate the site by making contours for the garden or paths using plastic bottles. The bottles are cut, the neck is removed to the point of narrowing, filled with sand or earth and dug in along the contour of the garden bed, flower bed or plot.

Gardening with plastic bottles

If necessary, the bottles are painted, which gives your frame an even more aesthetic appearance. This type of decor is quite diverse, since it is possible to organize any shapes and colors according to your desire.

planter

Hanging pots or just mini flower beds are easy to make from plastic bottles. Cutting off the top, we get a straight pot, cutting off the bottom - cone-shaped, or the middle - for hanging models. After, the workpiece is covered with soil and the plants you need are planted in it. Bottles can be dyed or left clear. You can install models of pots along the path or decorate the fence with hanging planters.

bottle fence

Making a fence, in principle, is simple, such a building is very economical and will allow you to protect the site from the penetration of animals and other unwanted guests. For the construction, pins are used, tightly fixed in the ground, on which plastic bottles are strung.

Bottle gazebo

In the presence of required material and free time you can make a gazebo. To base the gazebo you will need a lot of wire and rods. The foundation can also be made from plastic bottles filled with sand or earth. If desired, the gazebo can be covered with a protective cloth or tarpaulin. Components of the bottle can be painted and easily replaced at any time.

Trap for bloodsuckers

To make a mosquito trap from a plastic bottle, you will need a two-liter container, which is then cut in half. The upper part is turned over and inserted into the lower one, organizing a funnel, and the lower one, in turn, is filled with sweet water. Then the entire workpiece is darkened by painting or gluing. The trap is ready. To attract flies and wasps, you can add a little jam, honey or syrup to the container.

Scheme for making a mosquito trap from a plastic bottle

Pugach for moles

For this craft, make three cuts in the bottle, and bend the plastic so that you get the blades. Pour small stones at the bottom of the bottle, and put the bottle itself on a rod buried in the ground. In the presence of minimal wind, the structure will produce sounds that are not tolerated by moles.

Pugach from moles from plastic bottles

Irrigation structures

Bottles can also be used to water plants in your summer cottage. Uniform watering can be organized in several ways. A variant is possible with an incision in the bottom of the bottle and digging its neck into the ground. Before burying the neck, a hole is made in the lid, and grass is laid on the bottom of the hole to prevent clogging of the lid with earth.

You can also cut off the bottom of a plastic bottle and hang it over a flower bed or in the desired area of plantings. In this case, watering will be carried out through the neck of the bottle with a loose lid. Irrigation is regulated by more or less twisting of the plug.

Crafts from covers

When working with plastic bottles, a sufficient amount of corks may remain. Proper use of them can breathe new life into them and help avoid the disposal process.

Cover curtains

The organization is very simple, with a drill or a thin nail, holes are made in the lids different colors and with the help of a fishing line, the elements are attached to each other and to the eaves.

Cork pictures

With some experience and a sufficient number of covers of different colors, you can make a wonderful decor for any surface.

When working with bottles of any size and color, make sure they can withstand the weather conditions in your climate area. Before carrying out any operations, take care to remove the labels from the surface of the bottle.

Conclusion

Plastic bottles and caps do not have to be thrown away after their direct use, they can be indispensable decor elements for your dacha. After reading this article, you will be convinced of the secondary rational use plastic containers and you can make them good crafts with your own hands.

Plastic bottles are inexpensive and readily available. In addition to their main purpose, they can perform many other functions. For example, you can make real masterpieces - do-it-yourself crafts from plastic bottles. Moreover, they will serve for a very long time, in the process of creativity they can be easily bent or cut. The main thing you need to make crafts from plastic bottles is to prepare a free container.

You probably have a question, what can be made from a plastic bottle? Most interesting options described below.

Making a plastic palm tree

The scheme for creating a palm tree is similar to creating various trees from plastic. You need bottles, scissors, and paint.

For a palm tree, you will need the middle and lower parts of the dark-colored container.

Insert the same part into the lower part (with the bottom) until you get the desired height. String the parts on a wire passing through the neck, and attach a green neck to the top of the tree - without a bottom. After that, cut the same green stripes and tilt them down.

If you make several of these palm trees, your Agrosad will be one of the most unique, and made with your own hands!

butterflies

Crafts from plastic bottles will look very original and decorate any gazebo.

To make such a masterpiece of art, the middle part of the bottle is cut out. A cardboard blank is preliminarily made - butterfly wings. Then you simply apply them to the plastic to cut out the desired shape around the edges. A wire is attached along the bend line. And the “butterfly body” itself is decorated with beads of different sizes. Decorate the wings of your butterfly with absolutely any colors of acrylic paints.

Such flower beds can be seen not only in suburban areas. They are also made in the city, near high-rise buildings and private houses.

Bottles are selected identical in shape, size and color. If you wish and opportunities, you can decorate them as soon as you want. Next, decorate the fence of the flower bed by digging the bottles to a certain depth.

Flower pots

Among other things, bottles can be made flower pots. Cut off the bottom of the container and get a cylindrical planter. Using the top of the container, get a cone-shaped planter. In addition, the resulting pots can be decorated with corrugated paper, fabric, yarn or decorated with paints.

Before or during work, you can slightly warm the plastic. So you can create any shape for him.

What else can be made from a plastic bottle?

Do-it-yourself gazebo to the country

Creating a gazebo from plastic containers is not so difficult, for which you need a lot of material and a kind of thinking.

To add strength to your structure, fill the bottles with earth/sand. For the manufacture of the frame, it is not necessary to overload it at all. And to decorate the sides of the gazebo, you can use different fabrics.

Plastic curtains - original decoration!

This solution is interesting and original. In addition, you can always see all the new items for the garden with your own hands! You can use curtains on the doorway / on the window. Need to prepare a large number of material. Everything here is individual and depends on the size of the window / doorway.

From seemingly unnecessary things, sometimes you can create very interesting and useful items that allow you to decorate the world, and sometimes, besides, it’s also good to save money. Ordinary plastic bottles periodically appear in every home. Every hostess gets rid of them from time to time so as not to litter the apartment. And very in vain!

The life of plastic bottles may not necessarily end in the bin. We offer you to learn how to give them a second life, which will be much brighter and more diverse than the previous one! Crafts from plastic bottles with their own hands can not only please the kids or decorate your home, but also save nature.

Plastic bottles - available material, the scope of which, if desired, can be significantly expanded. Not only adults, but also children can join the exciting creative process. Rally all family members for a common cause!

Many are aware of the deplorable situation with the ecology of our planet. Treatment facilities and processing plants are sorely lacking. But plastic products can decompose from 450 to 1000 years! At the same time, only about 90% of them do not go for processing at all.

Every self-respecting person is obliged to maintain cleanliness and not to litter. And inveterate gardeners and needlewomen hostesses have a competent approach to this issue. For them, plastic bottles are by no means garbage, but a very multifunctional item that served as the basis for a hobby.

Craftsmen, creating beautiful birds and exotic palm trees, thereby take care of the environment. In addition, the main advantages of plastic products are that they are strong and durable. To people who have never done anything like this, it may seem that it is impossible to create a true masterpiece from such waste material. Today we will prove that this is not so!

To make crafts from plastic bottles for beginners, you just need to collect as many multi-colored containers of different sizes as possible, and then it's up to your imagination!

From such a simple material, you can make an unusual decor for an apartment, a decoration for a playground, figurines of birds and insects, flowers, vases and even furniture! The creation process is easy and fun!

So where to start?

Plastic birds - decoration for home and garden

With a desire and some free time, you can try to make your own decorative birds from plastic bottles. They look very impressive and harmonious on a well-groomed lawn, among flowers in a flower bed, and just under a bush or tree near the house.

Snow-white domestic swan

To begin with, we want to tell you how to make a swan out of plastic bottles. To create it you will need:

plastic bottle 5 l;
a lot of milk or kefir bottles of 300 ml;
hose;
hard wire;
scissors;
black marker;
lighter;
paints.

Stage 1. Torso.

We mark the lines on the largest bottle with a marker, as shown in the figure - you need to cut a hole along them, which will later play the role of a planter.
Pull a rigid wire inside the hose and insert the hose into the bottle through the neck - this is the frame of the swan neck.

Stage 2. Plumage.

From a white bottle, cut off the bottom and neck.
Cut the feathers - their shape and width can be arbitrary.
Make small cuts on the edges of the feathers.
From the outside, treat each feather with a lighter.
Start stringing feathers on the wire in 2 pieces, not forgetting to fix.

Stage 3. Final assembly.

The same white bottles, only with cut bottoms, will serve as the neck of the bird. In our example, 16 of these were used.
The head of a swan is the upper part of the container with a cut neck.
In the part of the head where the hose ends and the beak begins, you need to make 2 holes in the bottle and in the hose on opposite sides and fix the structure with wire.
Build a beak from a bottle cut and painted with red paint.
Fasten the feathers, moving from top to bottom in a circle.

Everything! The plastic bottle swan is ready! It remains only to find a suitable place for him and plant your favorite flowers inside.

Pigeons - messengers of good news

The dove is considered a symbol of spiritual purity, and a pair of doves in the house, according to folk beliefs, promise love, prosperity and long life. We present you a master class on making a couple of delicate white doves.

Prepare in advance for work:

white plastic bottles;
Styrofoam;
scissors;
wire;
grid;
paints;
glue;
eyes.

The working process:

We cut off the neck of the bottle, as shown in the picture - this is the body of a dove. We make a breast a la collar.
We cut the plastic bottle according to the picture.
We press the incised part inward, forming a body, and tighten it with wire.
We cut out the bird's head from foam.
To create feathers, cut the middle part of a plastic bottle of various lengths into strips with rounded ends.
In each feather we make two holes at the base.
We fasten the feathers with wire to the grid.
We attach the finished pigeon tail to the body of the bird.
We decorate the head of the bird and glue the eyes.

Here we have such cute doves from plastic bottles with our own hands!

Fabulously beautiful proud peacock

To make a firebird from plastic bottles with your own hands, you need to prepare:

1.5, 2 and 5 liter plastic containers;
scissors;
blue trash bags;
foil;
Scotch;
stapler;
fishing line;
acrylic paints;
brush.

Having collected all of the above around you, you can safely get down to business, guided by our instructions and your own imagination. We will act step by step:

Stage 1. Tail.

Rinse and dry all plastic containers thoroughly, remembering to remove the labels from them. Cut off the bottom and neck of the bottle, leaving only the middle part. It, in turn, should be cut into 3 oblong petals.
We round one end of each of the petals like a bird's feather. On both sides we make many small incisions. Near the rounded edge, we attach an oval of blue polyethylene and a circle of foil with a stapler. Do the same for the rest of the feathers.
Cut out a semicircle from the middle part of a 5-liter bottle, to which we attach feathers with a stapler.
We lay out all the feathers, as shown in the figure.

Stage 2. Torso and head.

We cut off the neck of a 5-liter bottle, and the bottom of a 2-liter bottle. We fasten them together with adhesive tape.
We do not throw away the cut elements - we will make a peacock's head out of them. To do this, we twist the neck of the bottle into an oblong funnel and attach it to the bottom of another bottle.
We connect the head and torso with adhesive tape.
From garbage bags we cut out the plumage of a bird, which we attach over the entire surface of the peacock's body in overlapping rows.

On a note! To make the weight of the peacock heavier, pour sand inside its body.

Stage 3. Final.

The tail of the peacock is attached to the body with a rope (for this, a hole must first be made in the place of fastening).
We attach a stick or two thick wires to the peacock's stomach so that it can then be installed at its destination.
Peacock from plastic bottles is ready! It remains only to decorate with paints his eyes and beak. From the remnants of plastic, make a crown for the firebird.

Cute DIY plastic insects

Making crafts from plastic bottles is an easy way to make beautiful little things and jewelry. This is a great leisure option for those who want to create something beautiful with their own hands together with the children. In addition, from waste material you can make wonderful toys or even durable didactic material for classes to familiarize yourself with the outside world.

Below are the simplest plastic bottle workshops for creating various insects.

Amazing plastic butterflies

Bright butterflies made of plastic bottles with their own hands can decorate both a city apartment and a gazebo in the country. The process of making them is very simple and exciting, and most importantly - you can connect a child to it!

The set for creativity is standard:

plastic bottle (its color does not matter);
scissors;
a sheet of cardboard;
pencil;
wire;
acrylic paints;
beads of different sizes.

Creating a butterfly from plastic bottles step by step:

Cut out the middle part of the bottle.
Draw a template for the future butterfly on cardboard and cut it out.
Circle the workpiece, attaching it to the plastic, and carefully cut along the contour.
Attach the wire to the bend line.
Decorate the wings own will and decorate them with beads.

There are a lot of design options, here are some of the most interesting ones for your inspiration:

Such different ladybugs

You can create ladybugs out of plastic different ways, as well as from different parts the bottle itself. We offer you the most popular options.

Option number 1 - Ladybug from plastic bottles

You will need:

2 plastic bottles 0.5 l (black plastic) and 1 l (red plastic);
glue or stapler;
scissors;
acrylic paints.

Progress:

A liter bottle will play the role of the body.
We cut out the red wings of a ladybug from a bottle that is larger in size.
We draw black dots on the wings with paint.
We attach the wings to the body with glue for plastic or a stapler.
We make eyes and antennae (you can also make them from plastic).

Option number 2 - Ladybug made of plastic spoons

You will need:

small plastic bottle;
2 plastic spoons;
black and red acrylic paints;
glue.

Progress:

We paint the bottle black, and two handles from spoons - red with black dots.
Glue the cuttings to the neck of the bottle.
Add eyes and mouth.

Option number 3 - God's cork box

You will need:

cap from a plastic bottle;
paints.

Progress:

A tiny ladybug can be made from an ordinary cap by simply decorating it accordingly. It can become both a toy for a baby and a fridge magnet. To do this, just attach a magnet or double-sided tape to it.

Now you know that you should not rush to throw away empty plastic bottles, because you can easily and quickly make cute ladybugs with your baby from them.

Flowers from plastic bottles

DIY plastic bottle flowers not only look beautiful, but also bloom regardless of the season. And the ability to create beauty actually from garbage is beautiful and noble in relation to nature. Plastic flowers will become a unique bright decoration for both an apartment and a summer cottage. Just imagine, the snow has recently melted, buds are starting to bloom on the trees, and amazing blooming daisies, lilies of the valley or roses are already flaunting on your flower bed! Let's quickly master the intricacies of the process.

Delicate white daisies

To make chamomile from plastic bottles, we need:

white, yellow and green bottles;
scissors;
candle;
awl;
thermal gun;
green hard wire.

The manufacturing process is as follows:

From the middle part of a white bottle (for example, from under kefir), we cut out a circle 8 cm in diameter.
We make cuts of 3 cm from the edges to the center, which visually divide the circle into 16 equal segments.
Each petal is rounded with scissors and processed over a candle flame.
We pierce each corolla of the future color with an awl exactly in the center.
To create the core of the chamomile, we cut out two small circles from yellow plastic, along the edges of which we make many small cuts. They also need to be processed over a candle.
Cut out a small triangular segment in one of these circles.
We cut out a sepal from a green plastic bottle, which we also process with hot air over a flame.
We make a small hole in the center of the sepal.
We cut off the wire of the required length, which will serve as a stalk of chamomile and put a sepal on one of its ends.
Then we string two corollas and a yellow circle-middle.
We bend the end of the wire and mask it under the middle with a cut out segment, which we glue with a thermal gun.
We cut out leaves from green plastic, the entire surface of which, with the exception of the handle, is processed over a candle.
We attach the leaves with cuttings to the stem, wrapping them around it over the flame.

This is how you can make beautiful and durable daisies quite easily!

blooming lilies of the valley

Presented in our master class, lilies of the valley from plastic bottles are best suited for decoration. garden plot or cottages. If you don’t have white or blue containers on hand, you can always take those that you have and paint them with acrylic paint. As for the sizes, the smaller you want to get the bells from plastic bottles, the smaller the containers in terms of volume are needed.

To make buds, we only need the tops of bottles with corks. From them we cut out the petals of the desired shape.
Then we bend and heat each petal over the flame to make it more voluminous and realistic.
To make the lily of the valley look just like a real one, make small holes in the corks and thread them through the wire.
To create a bush, wind the wire with a thin spiral cut from a green plastic bottle and hold it over a fire so that the plastic melts slightly.
Hang the wire with bells on the branches of the bush.
Cut large green lily of the valley leaves from green bottles.

Luxurious home roses

A bouquet of roses made by hand can not only please the eye every day, standing on the desktop, but can also be a wonderful gift for your beloved mother or grandmother. In general, the peculiarity of the manufacture of plastic flowers lies in the understanding of the main principle on the basis of which roses, lilies, cornflowers, and asters are created. Therefore, to consolidate the material covered on daisies and lilies of the valley, we offer you a master class on creating chic roses.

The source materials are the same, so let's go directly to the creative process:

According to the templates previously drawn on cardboard, we cut out 7 plastic blanks (each next one is smaller than the previous one).
We make a small hole in the middle of each blank with an awl.
All the petals are alternately melted over a candle or a lighter, slightly bending upwards.
From a green plastic bottle, cut out the corolla of the sepal according to the cardboard template. Similarly, we make a hole in it and melt it.
The role of the stem will be played by a wire wrapped in a green plastic spiral cut from a bottle. The winding must also be slightly heated over the flame.
We put sepals and corolla blanks on the wire, starting with the largest. We press them firmly against each other, and bend the end of the wire with a loop.
We cut out leaves from green plastic using a stencil, which should also be slightly melted and fixed with cuttings to the stem.

Everything! The most beautiful rose ready! And this is what a small bouquet of roses might look like:

Plastic vases for natural or artificial flowers

Vases from plastic bottles are simple and beautiful crafts, you can even involve a child in the manufacturing process. The interior is made up of little things! Having chosen the material that is suitable in color and texture, it will be possible to make a beautiful vase that will look appropriate both in the kitchen and in the living room or in the nursery. So, if you try, you can save money, have fun and create a practical little thing.

To create an incredibly beautiful vase, we only need a bottle, scissors and some free time.

Cut off the top of the bottle approximately in the middle, leaving enough space for the fringe plexus.
Make equal cuts from top to bottom.
Carefully fold all the resulting strips outward.
Turn the bottle upside down to make sure the cuts are even on all sides.
Start bending the strips one by one, as shown in the figure.
Continue until all stripes are intertwined.

In addition to a vase, you can also make products from plastic bottles like a planter. Here are some ideas and examples of their design:

Useful little things made of plastic to give

How many unique creations can be made from the bottles that we send to the bin every day.

Plastic bottles are a great creative material that cost next to nothing.

For creative self-expression in a summer cottage, you just need to collect more soda bottles, stock up on scissors, glue and paint. We tried to collect for you a variety of ideas and options and master classes for creating crafts from plastic bottles step by step.

Comfortable and beautiful pouf

To make a cool do-it-yourself ottoman from plastic bottles to the country, you will need only 16 (but more can be) empty soda bottles closed with corks. Turn them upside down and tape 2 pieces together. Then connect all the pairs together. Attach cardboard circles of the appropriate diameter with adhesive tape from above and below.

Wrap a plastic bottle ottoman in foam rubber for extra comfort. Finally sew the day out of it old clothes beautiful cover. No one will even believe what your new piece of furniture is made of!

Broom for the hostess

With a few plastic bottles and scissors on hand, you can quickly and easily make a broom for an ownerless stalk that has been idle for a long time. To do this, cut off the bottom of the bottle and cut the plastic into small strips, not reaching the neck by 4-5 cm. The same should be done with two more bottles. Then cut them lengthwise, connect and attach to the handle.

Such a broom made of plastic bottles, of course, is unlikely to cope with sweeping litter on the carpet, but it can handle small debris in the yard!

Own palm tree to the envy of neighbors!

Most trees from plastic bottles are made according to the same pattern. For work you will need:

brown and green bottles;
scissors;
paint cans;
wire.

So, how to make a palm tree from plastic bottles that will delight the eye both in hot summers and in snowy winters, while remaining evergreen:

Cut off the bottoms of the brown bottles with scissors.
The collection of a palm tree trunk occurs by inserting one bottle into another and so on until the required height is obtained. In this case, all elements are strung on a wire that passes through the neck.
The top of the tree is the neck of a green bottle without a bottom.
Made of green plastic equal parts cut strips imitating palm leaves.
Don't forget to melt the cuts if you have a curious toddler who might cut himself on them.

A palm tree made of plastic bottles is not afraid of rain, snow, or wind. Having made at least a few of these exotic palm trees, you can coolly transform a flower bed by adding tropical notes to its design.

Before you start working on any product from a PET bottle, we want to give you some useful recommendations in the end:

To make the craft clean and tidy, before starting work, thoroughly rinse the bottles under running water, dry and remove the stickers from them.
It is most convenient to cut graceful details according to the template. Draw a pattern on cardboard and, attaching it to the plastic base, circle it with the tip of an awl or a permanent black marker.
The shape and volume of a plastic element can be given by holding it for some time over the flame of a candle or lighter.
It is more convenient to paint plastic before cutting, and in the end it remains only to correct the nuances of painting.
Acrylic paints are best for painting small crafts, while crafts intended for the garden or vegetable garden can be painted with spray or car paint from a spray can.
To keep the finished craft from a plastic bottle longer, cover it with a layer of colorless acrylic varnish.

Helpful Hints

7. Lift the fabric and thread the string through it.

Master class from plastic bottles. Mobile phone holder.

From a plastic bottle, you can also make a good and very useful holder for mobile phone. It is needed when you urgently need to charge your phone, you have found an outlet, but there is nowhere to put the phone.

Prepare a 0.5 liter plastic bottle, and pierce a hole with a knife to further cut off the unnecessary part of the bottle.

Using scissors or a utility knife, cut out the circle for the fork.

It remains only to insert the cord from the charger into the "neck" and plug it into the outlet.

Master class from a plastic bottle. Chandelier.

You will need:

50 plastic bottles (volume 0.5 l)

flower wire

plain wire

Bulb

Paint can

Glue (glue gun is better)

Scissors

Stationery knife

1. Prepare plastic bottles and remove labels from them.

2. Cut each bottle in the shape of a flower (see picture). To do this, use a clerical knife.

3. Spread the "petals" of flowers.

4. Once you've done steps 1-3 with all 50 bottles, it's time to paint them. Use spray paint or you can spend a little more time and paint each flower acrylic paints. You can choose any color. You can also vary the colors by making some flowers one color and others another.

5. Make a circle from ordinary wire. Wind the jute, and use a glue gun to glue it to the wire. You will get the base of the chandelier to which the flowers will be attached.

6. Using flower wire, attach each flower to the circle you made from the wire.

There are two ways to attach floral wire to a flower: wrap it around the neck, or glue it.

Here is what the first layer looks like.

7. Repeat all steps to make multiple layers. In this example, 3 layers were made.

8. Attach the chandelier to the ceiling using jute (see picture).

What can be made from plastic bottles. Sprinkler.

Just make holes in the cap of a plastic bottle with an awl or a nail.

Products from plastic bottles. Funnel.

Plastic products from bottles. Money box.

1. Prepare a plastic bottle. Wash her out hot water with soap and leave to dry.

2. From colored cardboard, cut out details such as ears, eyes, a snout and nostrils.

3. Use glue or double tape to attach all the details.

4. Wrap the bottle with patterned paper.

5. For legs, you can use empty coils that need to be glued to the bottle.

6. Make an incision at the top for coins.

We make a dispenser for plastic bags from a plastic bottle

You will only need one 3 liter plastic bottle to store your plastic bags.

Simply cut off the bottom of the bottle so you can put bags in, and the neck so you can carefully remove one bag at a time.

Can sandpaper make the edges of the bottle more even and smooth.

We make bracelets from plastic bottles

You will need:

Plastic bottle

Adhesive tape (the width of the bracelet depends on the width of the tape)

Double-sided tape

Felt (or other material)

Scissors

Stationery knife

Decorations

1. First, wrap the bottle with duct tape. Make several "rings" as shown in the picture. Everything needs to be done neatly and evenly, since it is the tape that will determine how smoothly you can cut the bracelet out of the bottle.

2. Using a utility knife, carefully cut off each ring.

3. Carefully remove the adhesive tape.

4. Glue double-sided tape to the resulting plastic bracelet.

Plastic bottles are readily available and inexpensive. In addition to the direct purpose, there are many incredible options for their use. Plastic as a way of decorating was to the taste of those who like to build something with their own hands. And this is not surprising - products made from it are quite durable, the bottle body bends effortlessly, the strength of the material is also pleasing. With your own hands and without problems, you can make incredible crafts for a summer residence, a garden, a front garden and an ordinary living space. So, the main task is to collect as many colorful and different-sized plastic bottles as possible, and the rest is fantasy.

Bottle and tire sun

Wasps from plastic bottles

Wasp and bottle flowers

Peacock from plastic bottles

Palm from plastic bottles instruction

It is important to know that most tree-related plastic bottle crafts follow a similar pattern. In the work you will need - a plastic bottle, scissors, paint for plastic and wire. The execution of the palm tree takes place using the middle and lower sections of the dark-colored bottles, it is advisable to make foliage from green bottles. The next similar bottle is inserted into a plastic bottle with a cut bottom until the required height is formed. All elements are strung on a wire passing through the neck, the neck of a green bottle without a bottom is attached to the top. Further, strips of green plastic are cut in equal parts and lean to the bottom, imitating palm foliage.

Bottle palms in the country

Palm tree with sharp plastic leaves

Bottle palm with flat leaves

A simple palm tree made from plastic bottles

Thus, three or more palm trees made from such improvised material as plastic bottles can decorate any country cottage area and garden. This element of decor will delight the eye all year round, rain, snow and wind are not afraid of it. If there is a baby in the house, do not forget to melt the cuts on the bottles. In addition, do not be afraid to involve the baby in joint work. Most likely, he will gladly respond to help.

Original and bright flower beds in the garden from plastic bottles with your own hands

It is very easy to create useful trifles and landscape works from plastic bottles for summer cottages, including flower beds, gazebos, supports for greenhouses and canopies, frames for climbing plants, etc.

Flower beds made of plastic bottles are quite common not only among amateur gardeners, but also just near high-rise buildings. To make a flower bed, you need to pick up plastic bottles of the same shape and color. If you have time and desire, you can decorate them both in one color and using a whole palette. To design the borders of the flower bed, it is enough just to dig containers along the perimeter to a sufficient depth. The result is an original fence.

Fencing a flower bed or garden

Making a flower bed out of bottles

Flowerbed decor from plastic bottles

Flowerbed sun with borders

Cache-pots and pots for outdoor flowers from plastic bottles

Also, plastic bottles can be used as table and hanging pots. If you cut off the bottom of the bottle, a cylindrical planter will come out, when using the upper part, you will get a cone-shaped one. If such pots are decorated with colored corrugated paper, fabric, yarn, or simply decorated, an unforgettable element of the interior will appear. Slightly heated plastic will be easy to give absolutely any shape, this makes it possible to create the most unusual flowers.

Hedgehog from grass and a bottle

Flowerbed-swan from bottles

Reindeer team of bottles and tires

Cache-pot from plastic bottles

And here is a video of ideas on how you can use bottles to decorate the garden and in order to make it more functional:

Arbor from plastic bottles in the country - elegant and comfortable

If there is a need to build a gazebo, supports for climbing plants, greenhouses, you should stock up on a large number of identical plastic bottles, as well as patience, imaginative thinking and ingenuity. The arbor is fastened with small screws. If whole containers are to be used, it is advisable to fill them with sand or earth in order to add reliability. If a frame is being made, do not overload it unnecessarily. Fabric or other light protective fabrics attached to bottles to decorate the side parts will look good.

house made of bottles and wood

House of cement and bottles

Arbor from plastic bottles

Canopy from plastic bottles

Decorative country curtains from plastic bottles

Curtains made of plastic bottles on windows or in doorways - the most interesting design solution. To create them, you will have to take a large number of these same plastic bottles - in direct proportion to the size of the window (or doorways). Cut off bottoms from containers (of low height) must be connected to each other. A fishing line or thin wire is suitable as a fastener. An unusual composition of bottles will turn out if you take bottles of various sizes and colors. If there is a desire and time, a curtain made of transparent identical bottles, painted with acrylics, will create an unforgettable feeling.

bottle bottoms

Bottle bottom curtains

Decorative bottle curtains

Curtains in the bathroom from plastic bottles

DIY animals, birds and insects from plastic bottles

Not everyone is happy with real animals, birds and insects in the garden. Indeed, who will like it when a mole digs in the garden, a live wolf or a bear wanders, owls fly or mosquitoes and wasps attack. But bright crafts from bottles can easily decorate your dacha. More ideas in this article.

Animals from plastic bottles with a photo

Making crafts from bottles is not at all difficult, anyone can find the material in any quantity, and multi-colored paints will give life to crafts. So the main problem that may arise in front of you - what exactly to do? Why not animals? Here, for example, cats, mice and penguins made to decorate the site:

Piglet from plastic bottles - step by step instructions

The easiest way is to make various animals from plastic bottles. For example, you can make bright pink piglets like this and put them in your garden for decoration:

All you need is either a large five-liter plastic bottle for the pig's body and a few regular bottles for the legs and ears. Here are instructions on how to do it:

After the pig is ready, all that remains is to paint it in pink color. You can do several different crafts. Here are a couple more photos for you:

DIY bottle birds

Or maybe put some bird in the garden? Why not make funny crows and place them on an apple tree branch? Or make a penguin with a chic tail that you can put in a clearing or under a tree. You can also make an owl and attach it to the fence or near the hollow of a tree in the garden, or yellow ducks that you can decorate with.

Swan from plastic bottles - simple instructions for making

And of course, the most popular bird, which is often made from bottles, is a chic snow-white swan. There are several options. The easiest - paint the bottles in White color and stick the neck into the ground, forming the contour of the body of a swan - at the same time it will be a fence for a miniature flower bed, inside which you can plant any flowers. From what else - read the link. After that, it remains to make the neck and head of the swan - from the same bottles, from papier-mâché, corrugated tube, plaster or other materials, and this is what we get:

But there is more difficult ways. For example, you can make the frame of the body of a swan, and on top of the feathers from plastic spoons - they are already white, so you don’t even have to paint. Or cut openwork feathers from bottles - long, dreary, difficult, but the result is really worth it, it’s not a shame to send such a craft even to a competition. And do not forget to create a pair for the bird: you can make a white and black swan.

And here is a video master class on how to make a stork from bottles with your own hands:

Master class: wasp, ladybug and other animals from bottles

Also, various insects can be made from bottles, so do not rush to throw them away. During the winter, you can just collect enough material for summer crafts. The leader here, of course, is the ladybug. It is very easy to make from the bottom of a plastic bottle, step by step wizard the class is not even required - just cut off the bottom, make a head with wire horns out of caps or some kind of ball, paint it red or any other color, draw dots and eyes - here the craft is ready:

What else can be done - read in this article. By the way, it is also easily made from plastic spoons - then you can decorate trees or a fence with them. Other insects that can be made from bottles are predatory wasps and bees, bright dragonflies or butterflies, which we will now tell you how to make.

Butterflies from plastic bottles: a master class for decorating a gazebo

Bright butterflies will decorate any room, they will look especially original on the gazebo. To make these insects, you should cut out the middle of the capacity of a plastic bottle (color does not matter), make a cardboard blank in the form of butterfly wings, attach it to plastic and cut off at the edges. Next, attach the wire to the bend line. Beads of various sizes will help decorate the body of such a “resident of the gazebo”. Butterfly wings are painted with acrylic paints according to the desired image. It is desirable that the color of the butterflies match color scheme decoration of the place of rest.

Butterflies from plastic bottles

Draw and cut out a butterfly

creative butterflies

Go for butterfly flowers

Figures of people from plastic bottles

If you are already familiar with animals, let's go ahead and try to make something more difficult, for example, figurines of a man from bottles. For example, look at what a cute black baby came out of brown bottles, and how easy it is to make it:

By the way, the black woman is a popular topics of plastic crafts. This is probably due to the fact that after winter a lot of bottles accumulate Brown, which can be used for crafts without even painting. Well, another option is garden gnomes, a man and a woman, who are also not at all difficult to make:

Flowers from plastic bottles with step by step instructions

Poppies from bottles - do it yourself

Why not decorate the cottage with flowers? And not necessarily alive, although that would be a great option. But in addition, you can add various flowers from plastic bottles. For example, it is very easy to make poppies out of them - here is a brief step-by-step instruction:

Actually, there are no special steps here - we cut off either the bottom or the neck, depending on what kind of flower you want to make, and form the petals with scissors. Next, paint with varnish or paint. From green bottles we make a stem and leaves, collect them with glue or wire into a single structure and “plant” the flowers in a flower bed. In this way, you can make poppies and bluebells, daisies and gladioli, irises and roses, forget-me-nots, carnations, tulips and many other flowers that will not be difficult to recognize.

Flowers and insects, animals and birds, palm trees and gazebos - all these ideas are popular, but also hackneyed. And if you want to stand out, you have to come up with something of your own. But almost anything can be made from this material. We have selected a few for you non-standard options. Of course, you can use them, but it would be ideal to come up with something of your own. By the way, we personally really liked the bright yellow minions made from a whole bottle - despite the absolute simplicity of execution, it looks really unusual.

Also a good idea for those who love winter more than summer - why not make long-lasting snowmen that will not only attract attention in summer, but also decorate your garden in winter?

And the most interesting thing that we managed to find: at the very beginning of the article, we said that you can easily make a gazebo for summer holidays in the garden from bottles. But this craftsman went further and made not only the gazebo itself, but also the entire environment in it exclusively from bottles. These are walls, and armchairs with a coffee table, and a curtain, and decorative elements. How do you like the idea?

Thus, there are a huge number of ideas for decor. The main thing for their implementation is desire and imagination, as well as the presence of plastic bottles. And from them almost always there are traffic jams, which are most often not used in the usual crafts. But do not rush to throw it away, in the end we will tell you how you can decorate the cottage with the help of these same traffic jams. In the meantime, watch a video about the 5 most simple and easy-to-implement ideas on how you can use plastic bottles to decorate your summer house and garden:

We decorate the cottage with crafts from bottle caps

And it is very simple to do this - we will lay out a mosaic from multi-colored traffic jams. It can be animals - below there is a ready-made scheme for a cat and a dog, flowers or any other pattern that comes to your mind. Or you can lay out a whole panel, as in the photo above. Of course, this will require a considerable number of traffic jams. But the plus is that you can use ready-made patterns for embroidery to calculate exactly how many corks you will need and what colors. You can decorate the walls of the house, the space around the windows, the fence, the barn and any other horizontal and vertical surface with a mosaic of bottle caps in the country house. For example, why not make a door mat out of corks?

We also recommend viewing: