In the construction of buildings, often wooden structural elements are connected with nails. But such a procedure requires certain skills. To get the job done faster and easier, you can use metal corners for fastening wooden structures. With fastening components of various modifications, the amount of estimates for building materials is reduced due to a decrease in the percentage of trimming.
Fasteners for wooden structures
This fastener is an element of various configurations and sizes with a specific purpose. It is made of high quality galvanized steel and has holes for nails and bolts.
During its manufacture steel is used because it is very durable and moisture resistant. Products from it are not subject to corrosion and have a long service life.
To ensure the strength and quality of the joints, the metal elements used to fasten wooden structures manufactured only in the factory. Manufacturers provide a wide selection of various fasteners. It is important to choose them correctly for a certain type of work.
Today, the building materials market has a large selection of fasteners from different manufacturers:
In addition, similar products subdivided into classes:
- Metal. They are metal plates of various geometric shapes: a square, a corner, etc. Such fasteners contain many holes for fixing.
- Steel. These include nails, screws, anchors, bolts and dowels. These elements connect wooden structures, which are made of an alloy of various modifications and lengths.
All wooden element holders must correspond the following requirements. When using metal holders, the thickness of the timber should be at least five centimeters. This is due to the length of the nails and screws that will be used for fastening.
To prevent loosening of fasteners when the beam dries, it is necessary use ripped nails instead of the usual ones. Connecting elements are recommended to be installed in pairs parallel to each other. During installation wooden bars connect butt to butt, gaps are not allowed.
Perforated holder
Perforated fasteners for wooden structures are widely used not only in construction, but also in everyday life and in furniture making. They have gained high popularity due to their undeniable advantages:
Perforated fasteners are made in the form narrow and wide plates, corners and other shapes. Besides truss systems, such a connection is used in the construction of such structures:
- gazebos;
- wooden houses;
- wood finishing of building facades.
Hidden fasteners
The method of hidden fasteners is used, as a rule, to connect boards on the terrace and facade. The advantage of this fastening is that thanks to it, the elements that fasten the boards are hidden. This adds elegance to the design. Hidden fasteners can be of the following types:
Each of the above holders own modification, which is selected based on the severity of the structure and complexity.
Decorative fasteners
This type of connection is mainly used for interior decoration the tree of the room to give it an aesthetic look. Decorative holders are made of both metal and plastic. Outwardly, they look like a plug, which is put on connecting elements of various types.
For application various connections wood in the field of construction is not only indispensable without tools, but also without relevant experience. That is why for inexperienced craftsmen such connections are not always obtained accurately. One of the best options- use by professionals a variety of types of fasteners for the array, which are made of metal.
Many surviving architectural monuments made of wood were built without nails, using only an axe. This fact causes true pleasure to this day. However, centuries later, fasteners erected from metal, used to build solid wood structures, have changed radically, for this very reason it is pointless to repeat the experience of our ancestors today.
It is preferable to erect quickly and without difficulties. Let's talk in more detail about the fasteners offered by manufacturers, taking as an example the details that make it possible to simplify the connection of beams with floor logs or solid wall surfaces as much as possible.
Fasteners with perforation
When beams, as well as logs of the floor surface are hidden in the interior space, it is possible to connect them using beam shoes. This fastener for wood structures is suitable for fixing the array not only to wood, but also to concrete, brickwork. It is made from durable steel.
Manufacturers advise attaching such fasteners to the parts to be joined. special screws, and in case of excessive load, or fixing to a stone material, use the holes for the necessary bolts. In addition to anchor shoes, today you can purchase special clamps, and much more.
tenon groove
This galvanized wood fastener consists of a tenon part and a groove part, which are joined together to ensure better transmission of horizontal as well as vertical forces.
The connection can be visible or hidden; for this purpose, steel parts are recessed in advance into special grooves.
Reiki three-dimensional
A modern Italian company produces fasteners that are placed perpendicularly and vertically at an angle, using T-type rails, created by extrusion from a high-strength steel alloy. They are produced in several modifications, provided for multi-level loads.
The fastening system must be selected according to the size range of the cross-sections of the combined beams and the dynamic and static loads acting on them.
During installation, the rack base is attached to the beam by means of self-tapping screws. Then, on the end part, attached to the base of the log beam, a groove is created of the same size as the rack shelf. In the absence of perforation, the shelf is equipped with a lag and the connection is fixed with self-tapping screws.
Hidden details Hedgehog
These connectors are steel washers, the base of which is equipped with holes drilled under the slope. These holes are for self-tapping screws. There is a threaded hole in the center of the washer into which a pin is inserted. Its free end is threaded into a special hole and fastened with reverse side beams with a detail with a washer.
The created connection works perfectly not only for pulling, but also for shearing. With excessive load in the area of \u200b\u200bthe end part of the log, it is possible to install several elements at the same time.
Fasteners with complex thread
Unusual self-tapping screws, which make it possible to save time, money, since this option does not require metal parts. The self-tapping screws are threaded to help create a high degree of pull-out resistance, as well as being tightly screwed into an array that completely changes their traditional function.
In this case, the work of the screws is exclusively for pulling out, which gives them the opportunity to take most of the effort that falls on the connection. So, you can fasten elements at an angle, combine parts, minimizing their deflection, as in the photo of wood fasteners below.
Self-tapping screws for special purposes
Using similar elements, they fasten quite massive wooden crafts. The hat has milled ribs and is easily recessed into the product, while the tip is created like a drill. In the middle of the screw, the cutter makes more hole, helping to pull the element as tightly as possible.
Self-tapping self-tapping screw will be useful for fastening door frames, window openings, solid wood sheathing to wood, metal. The self-tapping screw is screwed directly into the box, as well as the wall surface located behind it, or a power part.
The self-tapping screw acts as a weather vane for high-quality fastening of solid wood sheathing to a base made of steel. It has a tip in the form of a drill and wings placed above it to expand the hole in the tree.
When drilling metal products, the wings break. As a result, having made a thread in a metal part, the self-tapping screw fits snugly against it, while the element from the array is attracted by the cap to the metal.
Photo of wooden fasteners
The connecting elements are made of high-quality galvanized metal, which is not subject to corrosion. The fasteners for wooden structures presented on our website have the following advantages:
- Reliable durable construction;
- Ease of installation;
- Wide range of standard sizes;
- Affordable cost of products.
The connecting elements are designed for rigid fastening between wooden structures. The use of components allows you to maintain the integrity of the wood. Using hidden fasteners for wooden structures, you do not have to make additional cuts and technological holes in the material, which has a positive effect on the strength of the entire structure.
Varieties of fasteners for wooden structures
Perforated fasteners. With its help, the installation of a bar of various sections is carried out. These elements are used in almost any wooden housing construction. This category includes simple and reinforced corners. Reinforced materials are equipped with a stiffening rib, which increases the strength and reliability of the structure connection.
Beam holder. This fastener for wooden structures, the price of which is relatively low, is used when performing roofing work, as well as for assembling timber structures. It is also suitable for flooring, floor construction and for anchoring structural beams.
support for timber. This fastener is suitable for both open and closed work when installing floor beams. The support is made with perforated holes of various diameters. For connection wooden elements screws or nails may be involved, and anchors are used to grip concrete structures.
Offer from Metallist
To buy fasteners for wooden structures in the required quantities (from one package), call the managers of the Metalist trade and production company. Our experts will help you to choose suitable fixing materials, as well as arrange delivery of purchased products.
- Perforated fasteners
- Fixing angles
- Shaped fasteners
- Hidden details "Hedgehog"
- tenon groove
- supports
- Fasteners with complex threads
Fasteners for wooden structures are necessary to connect building elements into a complex. Mounting parts are made of steel, aluminum alloys and other metals.
Kinds
Fasteners differ in size, their functions in the joints of wooden elements among themselves and in fastening wood to other materials: concrete, brick, metal. The use of parts allows you to evenly distribute loads, avoid destructive deformations inside the tree.
- with perforation;
- corners;
- shaped;
- hidden details "Hedgehog";
- thorn-groove;
- supports;
- hidden;
- with complex carving;
- decorative overlays.
Perforated fasteners
The main material of mounting elements is galvanized steel. The geometry of the structures can be different. A common feature is the presence of many holes. Perforation allows you to choose desired point fastenings in wood. Self-tapping screws are screwed through it or screw nails are driven in. The advantages of this type of fastener:
- Saving connection time structural elements from wood.
- Not a large number of waste when fastening knots.
- Possibility of installation of several hardware in one plane. This increases the bearing capacity of the mount.
- Variety of types of mounting products. Allows you to choose the optimal solution for evenly distributing the load on the wooden components of a part of a building or structure.
- Versatility. Suitable for all lumber.
- plates;
- corners;
- holders for beams;
- three-dimensional slats;
- mounting tape.
Planks with many holes are used to fasten wooden elements in one plane. In terms of details can be different shapes(for example, in the form of the letter T, Z). The plates are made of steel with a thickness of 1–3 mm or more.
Parts are easily bent, which is convenient when pairing wood at an angle of 90 ° or more. Scissors for metal plates can be cut.
corners
To connect wooden structures at right angles, equilateral, reinforced, double-reinforced, anchor metal corners are used. There are more complex products: Z-shaped, sliding, and other modifications.
Beam holders
The product allows you to connect the beam and bars. Fastening is established on self-tapping screws or screws. The supporting part of the beam is fixed from the sides and from below. Perpendicular planes of the steel part are fixed on the transverse bar. The photo shows one of the holder options.
Reiki three-dimensional
There are different lengths. Design feature - the connection elements fix the tree in three planes. Reiki form a strong and reliable fastening in knots. Metal longitudinal rails perform two functions: they bind the wood into single system, are load-bearing beams that take on a significant part of the vertical load.
Fasteners - T-profile made of durable steel alloy. They are produced by the Italian company Alumidi. Reiki are selected based on the cross-section of the elements to be connected, the level of dynamic and static loads.
Perforated galvanized steel tape is used as an auxiliary fixator when making complex knots of wooden structures. It is easy to cut into pieces. Can also be used as a fastener metal products to wood.
Fixing angles
These mounting elements have one or two holes on adjacent planes. Corners for fastening wood can be equipped with 1 or 2 stiffeners. They are used in the construction of structures made of wood, the manufacture of furniture.
Can be the main and auxiliary fasteners of wood to other materials. Inner corner- 90°,120° or 135°.
Shaped fasteners
This type of metal products includes a wide range of parts.
Hidden details "Hedgehog"
Steel washers have internal thread inclined. Holes are drilled in wood through washers. A washer is also installed on the reverse side. A pin is screwed into the channel, which tightens the tree.
Several studs are installed at the junction nodes at once. In solid wood, the rods occupy a crossing position. This creates a strong hidden fastening of wooden structures. Fastening is also carried out with long self-tapping screws, which are located at an angle in solid wood (usually 45 °). This method is used in the construction of a wooden roof.
tenon groove
The fastening is created due to the material of the connected parts. In one element, wood is removed around the protrusion (thorn), in the other array, a groove is cut.
The spike must enter the groove with some force to firmly pinch the protrusion in the hole. Lateral stresses create frictional forces between the tongue and groove, forming an almost inseparable connection.
Depending on the dimensions of the parts, the dimensions of the spikes and grooves are determined. In cross section, they can be rectangular, square, oval. For increase bearing capacity knots of the part are lubricated with carpentry or synthetic glue. In some cases, the fasteners are reinforced by installing additional metal fasteners.
supports
These are two supporting steel plates, pulled together by a hairpin. Installed between the bottom wooden house and foundation. Upper platform fixed with self-tapping screws and bolts to the lower wooden structures of the building. The bottom plate freely rests on the base of the house or is fixed with hardware, welding. The design plays the role of a jack. By turning the studs, the horizontalness of the floor is adjusted. This type of fastener makes it possible to exclude the penetration of moisture upwards, creates a reliable support system for the house.
Advantage - invisible connection of massive structures. The clamping elements are hidden in the grooves of the wood, which are connected by a drilled channel. A pin is inserted inside. On the one hand, the rod comes out, has a nut. By rotating the nut with the stud, tighten the plate hidden in the groove.
Hidden fasteners are used in interiors frame houses from glued timber. This type of fastener is expensive. The installation process is labor intensive.
Fasteners with complex threads
Complex carving - combining the helical cutting surface of a self-tapping screw with a drill at its end. The drill is narrower than the screw diameter. It punches the way of the cutting spiral of the screw. Hardware of this profile is used in working with hardwoods.
Are intended for registration of seams of connections from a bar and a board. Curly plates are installed indoors, on the facades of wooden houses.
What should be fasteners for lumber? wood is enough soft material, especially when compared to other types of arrays. However, the physical properties of wooden parts used in construction can vary greatly depending on their percentage of moisture, the species used, the growing conditions of the trees ... The structure is not uniform even in different parts of the same log. In any case, the fastener must hold well in the fibers and securely fix any details. To increase the friction force, nails are very often knurled or brushed, and self-tapping screws have large threads.
Reliability of fasteners on wood
Most wood fasteners in Moscow are made from galvanized and phosphated steel or metals that do not rust (for example, there are nails made of aluminum, copper). Only some types of products are made of ferrous metal, but only those that are used in draft structures - building nails, hardened roofing brackets. The protective coating allows you to significantly increase the service life of fasteners, but, in addition, the aesthetic properties of the product are improved by an order of magnitude, because red spots and rust stains will be excluded.
The design of modern fasteners is thought out to the smallest detail. So, there are dozens of types of self-tapping screws that are designed for certain jobs, each of them has its own characteristics. For example, a roofing fastener has a drill on the tip that can drill through sheet metal, and a large rubberized washer. And for structural yellow self-tapping screws - intricate carving on the body (sometimes incomplete) and a special tip. The finishing nail has a very small head, and the galvanized nail for fixing the OSB, on the contrary, is quite large. There are fasteners with a conical head under the sweat, and there are - with a flat one. There are many length options available.
Almost all of these fasteners (including perforated ones) are operated under load, so they must be resistant to bending and shearing effects. High-quality fasteners for wood do not break, in extreme cases, they can only bend. For certain works, you can choose products of different thicknesses, this applies to both nails / self-tapping screws, and perforated plates / corners.
Types of fasteners for wood
Nails
This is perhaps one of the most famous and proven types of components for construction works. For this fastener for wood, the price is the most affordable, but it is distinguished by practicality and functionality. A nail is a metal rod cut from wire, which has a point at one end and a flat cap at the other.
During use, the product is hammered with a conventional hammer, or can be combined into tapes and loaded into a nail gun. Nails can be used alone or in combination with perforated fasteners.
The size of the cap differs in size, depending on whether the nail should be recessed or the part should be pressed more securely. The rod may have notches to increase the friction forces, because it is with their help that the nails are held in the wood. The length (in fact, as well as the thickness) of the nail is selected according to the nature of the connection and the type of loads experienced by the assembly.
Depending on the purpose for which the nails are intended, they are divided into several main types. If we talk about construction, then this:
- Black nails for construction
- Galvanized with a large hat,
- ruffed,
- screw,
- finishing,
- roofing felt,
- Slate.
self-tapping screws
This is a modern fixture, has high efficiency and is also very practical. The cost of fasteners for this type of wood is more than that of nails, but it also has many advantages.
The highlight of the self-tapping screw is that it takes advantage of the plasticity of wood. That is, it allows screwing without pre-drilling. Due to the wide thread pitch and its increased height (for example, metal screws have more frequent and lower threads), this fastener fits tightly into any wood fibers and keeps well there. At the same time, such a connection remains collapsible, while those knocked down with nails wooden details it is extremely rare to disconnect without damage.
The design of the thread and the tip is focused on easy entry into the tree. A drill at the end of wood screws is usually not used. The hat is made with a cone for sinking in, or flat, for the types "press washer", "roofing screw". The thread can be solid or partial. There are many options for the thickness and length of products.
To use self-tapping screws, a drill or screwdriver is needed, although, in theory, small items in small quantities can be screwed with a screwdriver. To transmit rotation from the tool, there are slots on the head of the screw. The shape of the slots may vary. As a rule, PH or PZ formats are used - this must be taken into account when choosing a bit.
Among the many types of wood screws, the most popular were:
- phosphated (black);
- galvanized (yellow);
- roofing (white and painted);
- screws with a hexagonal or profile head (including: capercaillie, with a ring, with a hook, L-shaped crutch screw, capercaillie with a spring).
Threaded metric connections
Nails and screws are not the only components that can be used to assemble wooden structures. The most loaded or most voluminous nodes are twisted by means of bolts and studs. Together with nuts and washers, these hardware allow you to get the most reliable fixation, because you can press the parts very tightly against each other, use rods of increased diameter (which means they are very strong). An obvious plus is the ability to disassemble and assemble structures several times.
Studs and bolts are installed through through hole, which must be drilled in each of the fastened parts. Direct fixation is carried out by tightening the nuts. Large washers allow for more footprint and prevent nuts/heads from sinking into the wood.
Perforated fasteners
This type of fasteners is designed to speed up the installation of wooden building elements. Thanks to such products, it became possible to avoid the technically complex (and labor-intensive) production of tie-ins and locks in wood. If cutting wood actually underestimated the cross section of parts, then perforated products made it possible to assemble end-to-end, moreover, with an increase in the reliability of the assembly. Therefore, there is no need to increase the cross section of lumber, as before. Accordingly, it will turn out to unload the house and save money, although before making calculations it seems that buying perforated wood fasteners is a rather expensive decision.
Another advantage of such products lies in the increase in the speed of construction. Connections with corners and plates can be easily made by non-professionals, because all that is needed is to cut a beam or board more or less exactly in length.
Perforated fasteners are presented in a wide range. They are integrated into a system and cover all the needs of modern wooden and general construction. They are made of sheet metal with a thickness of one and a half to 5 mm, in which there are a large number of holes (round small, large for anchors, long slots for sliding fixations). All products are galvanized, completely ready for use. Among all perforated fasteners, several types are distinguished by design and scope of use, first of all, these are corners, plates, supports, tapes.
Price list
wood fastener prices
| Product name | Variant name | The price of the product | ||
|---|---|---|---|---|
| Glue for plywood and parquet Artelit 21 kg | Bucket 21 kg | RUB 4,200.00 | ||
| Roofing bat | 6 mm | RUB 60.00 | ||
| 8 mm | RUB 65.00 | |||
| 10 mm | RUB 70.00 | |||
| 12 mm | RUB 75.00 | |||
| 13 mm | RUB 80.00 | |||
| 17 mm | RUB 90.00 | |||
| 25 mm | RUB 220.00 | |||
| 30 mm | RUB 220.00 | |||
| 40 mm | RUB 220.00 | |||
| 50 mm | RUB 220.00 | |||
| Mounting foam | Macroflex (prof.) | RUB 360.00 | ||
| Macroflex | RUB 300.00 | |||
| Titan (prof.) | RUB 380.00 | |||
| Titanium | RUB 320.00 | |||
| Wooden dowel | with a knot | RUB 14.00 | ||
| without a knot | RUB 18.00 | |||
| Self-tapping screw for wood yellow | 3x25mm | RUB 380.00 | ||
| 3x30mm | RUB 350.00 | |||
| 3x35mm | RUB 350.00 | |||
| 3x40mm | RUB 350.00 | |||
| 3.5x16mm | RUB 350.00 | |||
| 3.5x40mm | RUB 350.00 | |||
| 4x35mm | RUB 330.00 | |||
| 4x50mm | RUB 330.00 | |||
| 4x60mm | RUB 330.00 | |||
| 4x70mm | RUB 330.00 | |||
| 5x40mm | RUB 330.00 | |||
| 5x50mm | RUB 330.00 | |||
| 5x60mm | RUB 330.00 | |||
| 5x70mm | RUB 330.00 | |||
| 5x80mm | RUB 330.00 | |||
| 5x100mm | RUB 330.00 | |||
| 5x120mm | RUB 330.00 | |||
| 6x40mm | RUB 330.00 | |||
| 6x50mm | RUB 330.00 | |||
| 6x60mm | RUB 330.00 | |||
| Black wood screw | 3.5x16 mm | RUB 240.00 | ||
| 3.5x19 mm | RUB 240.00 | |||
| 3.5x25 mm | RUB 240.00 | |||
| 3.5x32 mm | RUB 240.00 | |||
| 3.5x35 mm | RUB 240.00 | |||
| 3.5x41 mm | RUB 240.00 | |||
| 3.5x45 mm | RUB 240.00 | |||
| 3.5x51 mm | RUB 240.00 | |||
| 3.5x55 mm | RUB 240.00 | |||
| 4.2x64 mm | RUB 240.00 | |||
| 4.2x70 mm | RUB 240.00 | |||
| 4.2x76 mm | RUB 240.00 | |||
| 4.8x90 mm | RUB 240.00 | |||
| 4.8x95 mm | RUB 240.00 | |||
| 4.8x100 mm | RUB 240.00 | |||
| 4.8x127 mm | RUB 240.00 | |||
| 4.8x140 mm | RUB 240.00 | |||
| 4.8x150 mm | RUB 240.00 | |||
| Construction nails black | 1.8x20mm | RUB 98.00 | ||
| 1.8x25mm | RUB 98.00 | |||
| 2.5x40mm | RUB 98.00 | |||
| 2.5x50mm | RUB 98.00 | |||
| 2.5x60mm | RUB 98.00 | |||
| 3x70mm | RUB 98.00 | |||
| 3x80mm | RUB 98.00 | |||
| 3.5x90mm | RUB 98.00 | |||
| 4x100mm | RUB 98.00 | |||
| 4x120mm | RUB 98.00 | |||
| 5x150mm | RUB 98.00 | |||
| 8x250mm | RUB 98.00 | |||
| 8x300mm | RUB 98.00 | |||
| Sliding support for rafters | 40x120 mm | RUB 70.00 | ||
| 40x160 mm | RUB 80.00 | |||
| 40x200 mm | RUB 90.00 | |||
| Beam staples, hardened | 6x150 mm | RUB 20.00 | ||
| 6x200 mm | RUB 22.00 | |||
| 6x250 mm | RUB 24.00 | |||
| 8x200 mm | RUB 26.00 | |||
| 8x250 mm | RUB 28.00 | |||
| 8x300 mm | RUB 30.00 | |||
| Perforated metal corner | 20x40 mm | standard | RUB 8.00 | |
| 40x40 mm | standard | RUB 14.00 | ||
| 50x35 mm | reinforced | RUB 15.00 | ||
| 50x50 mm | standard | RUB 20.00 | ||
| 70x55 mm | reinforced | RUB 26.00 | ||
| 90x40 mm | reinforced | RUB 32.00 | ||
| 90x65 mm | reinforced | RUB 34.00 | ||
| 105x90 mm | reinforced | RUB 47.00 | ||
| 130x100 mm | reinforced | RUB 62.00 | ||
| 140x140 mm | reinforced | RUB 120.00 | ||
| Perforated mounting plate | 100 x 35 x 2mm | RUB 18.50 | ||
| 140 x 55 x 2mm | RUB 29.00 | |||
| 180 x 40 x 2mm | RUB 39.00 | |||
| 180 x 65 x 2mm | RUB 49.00 | |||
| 210 x 90 x 2mm | RUB 59.00 | |||
| timber support | 110 mm | 50 mm | RUB 80.00 | |
| 140 mm | 50 mm | RUB 90.00 | ||
| 165 mm | 50 mm | RUB 100.00 | ||
| 180 mm | 50 mm | RUB 110.00 | ||
| 100 mm | 100 mm | RUB 120.00 | ||
| 160 mm | 100 mm | RUB 130.00 | ||
| 200 mm | 100 mm | RUB 140.00 | ||
| 150 mm | 150 mm | RUB 150.00 | ||
| Screw for fastening logs and rails (wood grouse) | 60 mm | 6 mm | RUB 40.00 | |
| 80 mm | 6 mm | RUB 50.00 | ||
| 100 mm | 6 mm | RUB 60.00 | ||
| 50 mm | 8 mm | RUB 50.00 | ||
| 60 mm | 8 mm | RUB 70.00 | ||
| 80 mm | 8 mm | RUB 85.00 | ||
| 100 mm | 8 mm | RUB 100.00 | ||
| 120 mm | 8 mm | RUB 120.00 | ||
| 130 mm | 8 mm | RUB 140.00 | ||
| 160 mm | 8 mm | RUB 160.00 | ||
| 180 mm | 8 mm | RUB 195.00 | ||
| 200 mm | 8 mm | RUB 240.00 | ||
| 60 mm | 10 mm | RUB 120.00 | ||
| 70 mm | 10 mm | RUB 140.00 | ||
| 80 mm | 10 mm | RUB 160.00 | ||
| 100 mm | 10 mm | RUB 180.00 | ||
| 120 mm | 10 mm | RUB 220.00 | ||
| 160 mm | 10 mm | RUB 260.00 | ||
| 180 mm | 10 mm | RUB 290.00 | ||
| 200 mm | 10 mm | RUB 320.00 | ||
| 220 mm | 10 mm | RUB 350.00 | ||
| 240 mm | 10 mm | RUB 390.00 | ||
| 260 mm | 10 mm | RUB 420.00 | ||
| 120 mm | 12 mm | RUB 290.00 | ||
| 160 mm | 12 mm | RUB 370.00 | ||
| 180 mm | 12 mm | RUB 390.00 | ||
| 200 mm | 12 mm | RUB 410.00 | ||
| 240 mm | 12 mm | RUB 480.00 | ||
| 260 mm | 12 mm | RUB 500.00 | ||
| 280 mm | 12 mm | RUB 580.00 | ||
| 300 mm | 12 mm | RUB 720.00 | ||
| Screw (capercaillie) with a spring | 10x200 mm | RUB 124.00 | ||
| 10x220 mm | RUB 134.00 | |||
| Screw ring | 8x120 mm | RUB 25.00 | ||
| 8x160 mm | RUB 30.00 | |||
| 10x220 mm | RUB 50.00 | |||
| Bolt | M6 | RUB 180.00 | ||
| M8 | RUB 180.00 | |||
| M10 | RUB 180.00 | |||
| M12 | RUB 180.00 | |||
| M14 | RUB 180.00 | |||
| M16 | RUB 180.00 | |||
| M18 | RUB 180.00 | |||
| M20 | RUB 180.00 | |||
| M22 | RUB 180.00 | |||
| M24 | RUB 180.00 | |||
| Washer | M6 | RUB 195.00 | ||
| M8 | RUB 195.00 | |||
| M10 | RUB 195.00 | |||
| M12 | RUB 195.00 | |||
| M14 | RUB 195.00 | |||
| M16 | RUB 195.00 | |||
| M18 | RUB 195.00 | |||
| M20 | RUB 195.00 | |||
| M22 | RUB 195.00 | |||
| M24 | RUB 195.00 | |||
| screw | M6 | RUB 190.00 | ||
| M8 | RUB 190.00 | |||
| M10 | RUB 190.00 | |||
| M12 | RUB 190.00 | |||
| M14 | RUB 190.00 | |||
| M16 | RUB 190.00 | |||
| M18 | RUB 190.00 | |||
| M20 | RUB 190.00 | |||
| M22 | RUB 190.00 | |||
| M24 | RUB 190.00 | |||
| Threaded stud | M6 | 1m | RUB 39.00 | |
| M8 | 1m | RUB 58.00 | ||
| M10 | 1m | RUB 70.00 | ||
| M12 | 1m | RUB 90.00 | ||
| M14 | 1m | RUB 129.00 | ||
| M16 | 1m | RUB 155.00 | ||
| M20 | 1m | RUB 245.00 | ||
| M22 | 1m | RUB 310.00 | ||
| M24 | 1m | RUB 380.00 | ||
| M6 | 2 m | RUB 78.00 | ||
| M8 | 2 m | RUB 116.00 | ||
| M10 | 2 m | RUB 140.00 | ||
| M12 | 2 m | RUB 180.00 | ||
| M14 | 2 m | RUB 258.00 | ||
| M16 | 2 m | RUB 310.00 | ||
| M20 | 2 m | RUB 490.00 | ||
| M22 | 2 m | RUB 620.00 | ||
| M24 | 2 m | RUB 760.00 | ||
| Finishing nails | 30 mm | 1 kg | RUB 200.00 | |
| 40 mm | 1 kg | RUB 200.00 | ||
| 50 mm | 1 kg | RUB 200.00 | ||
| 60 mm | 1 kg | RUB 200.00 | ||
| 30 mm | 5 kg | RUB 1,000.00 | ||
| 40 mm | 5 kg | RUB 1,000.00 | ||
| 50 mm | 5 kg | RUB 1,000.00 | ||
| 60 mm | 5 kg | RUB 1,000.00 | ||
| 100 mm | 1 kg | RUB 200.00 | ||
| 120 mm | 1 kg | RUB 200.00 | ||
| 150 mm | 1 kg | RUB 200.00 | ||
| 32 mm | 5 kg | RUB 1,000.00 | ||
| 40 mm | 5 kg | RUB 1,000.00 | ||
| 50 mm | 5 kg | RUB 1,000.00 | ||
| 60 mm | 5 kg | RUB 1,000.00 | ||
| 70 mm | 5 kg | RUB 1,000.00 | ||
| 80 mm | 5 kg | RUB 1,000.00 | ||
| 100 mm | 5 kg | RUB 1,000.00 | ||
| 120 mm | 5 kg | RUB 1,000.00 | ||
| Galvanized roofing screw | 4.8x29 mm | Metal + Wood | RUB 21.00 | |
| 4.8x38 mm | Metal + Wood | RUB 24.00 | ||
| 4.8x51 mm | Metal + Wood | RUB 26.00 | ||
| 4.8x76 mm | Metal + Wood | RUB 28.00 | ||
| 5.5x19 mm | Metal | RUB 21.00 | ||
| 5.5x25 mm | Metal | RUB 23.00 | ||
| 5.5x32 mm | Metal | RUB 26.00 | ||
| 5.5x51 mm | Metal | RUB 28.00 | ||
| 5.5x76 mm | Metal | RUB 34.00 | ||
| Painted roofing screw | RAL 8017 brown | 4.8x29 mm | Metal + Wood | RUB 26.00 |
| RAL 6005 green | 4.8x29 mm | Metal + Wood | RUB 26.00 | |
| RAL 3005 cherry | 4.8x29 mm | Metal + Wood | RUB 26.00 | |
| RAL 8017 brown | 4.8x38 mm | Metal + Wood | RUB 28.00 | |
| RAL 6005 green | 4.8x38 mm | Metal + Wood | RUB 28.00 | |
| RAL 3005 cherry | 4.8x38 mm | Metal + Wood | RUB 28.00 | |
| RAL 8017 brown | 4.8x51 mm | Metal + Wood | RUB 35.00 | |
| RAL 6005 green | 4.8x51 mm | Metal + Wood | RUB 35.00 | |
| RAL 3005 cherry | 4.8x51 mm | Metal + Wood | RUB 35.00 | |
| RAL 8017 brown | 4.8x76 mm | Metal + Wood | RUB 45.00 | |
| RAL 6005 green | 4.8x76 mm | Metal + Wood | RUB 45.00 | |
| RAL 3005 cherry | 4.8x76 mm | Metal + Wood | RUB 45.00 | |
| RAL 8017 brown | 5.5x19 mm | Metal | RUB 27.00 | |
| RAL 6005 green | 5.5x19 mm | Metal | RUB 27.00 | |
| RAL 3005 cherry | 5.5x19 mm | Metal | RUB 27.00 | |
| RAL 8017 brown | 5.5x25 mm | Metal | RUB 32.00 | |
| RAL 6005 green | 5.5x25 mm | Metal | RUB 32.00 | |
| RAL 3005 cherry | 5.5x25 mm | Metal | RUB 32.00 | |
| RAL 8017 brown | 5.5x32 mm | Metal | RUB 37.00 | |
| RAL 6005 green | 5.5x32 mm | Metal | RUB 37.00 | |
| RAL 3005 cherry | 5.5x32 mm | Metal | RUB 37.00 | |
| RAL 8017 brown | 5.5x51 mm | Metal | RUB 43.00 | |
| RAL 6005 green | 5.5x51 mm | Metal | RUB 43.00 | |
| RAL 3005 cherry | 5.5x51 mm | Metal | RUB 43.00 | |
| RAL 8017 brown | 5.5x76 mm | Metal | RUB 50.00 | |
| RAL 6005 green | 5.5x76 mm | Metal | RUB 50.00 | |
| RAL 3005 cherry | 5.5x76 mm | Metal | RUB 50.00 | |
| Mounting bracket sliding | 40x120 mm | RUB 60.00 | ||
| 60x220 mm | RUB 90.00 | |||
| Staples for construction manual stapler | 6 mm | RUB 40.00 | ||
| 8 mm | RUB 50.00 | |||
| 10 mm | RUB 60.00 | |||
| 12 mm | RUB 70.00 | |||
| 14 mm | RUB 80.00 |
How to cook ham in the oven at home
Pain in the lower abdomen during pregnancy, reasons for what to do Can the lower abdomen hurt if pregnant
Protein for muscle gain
The best vitamins for men according to customer reviews
How to lose weight on a vegan diet?