The service life of the water jet pump. The success of the Russian manufacturer - borehole pump "Vodomet

The Russian company "Dzhileks", located in the village of Klimovsk, Moscow Region, produces submersible multistage pumping units. Water cannon pumps are manufactured to provide independent water supply to a private house and garden watering. Moreover, the range of equipment of this brand is represented by a whole set of household appliances that have different power and dimensions. Thanks to such a large selection, the buyer can choose a model that provides the required amount of water.

All submersible pumping units of the Vodomet series are manufactured at domestic enterprises, therefore, even at the development stage, parameters are laid in them that allow the equipment to be adapted to work in the conditions of domestic water supply systems. This is especially important, since our waterways are not as clean as foreign ones.

Borehole pumps of this series are able to pump even dirty water with impurities up to 300 g per m³. For the production of guides and impellers, the manufacturer uses a special LEXAN polymer. And for the manufacture of thrust bearings, ceramics and graphite are used. Thanks to such innovative additions, the wear resistance of the units increases, their service life increases, and the likelihood of breakdowns is minimized.

At the same time, downhole units of the Dzhileks brand are practically not subject to clogging, since they have a self-cleaning function. It is not surprising that such pumps can only be heard about positive reviews, because in addition to domestic nodes, they use parts of American, French, Swedish, German and Italian production.

The performance and design of pumps of this brand are constantly being improved. For example, new models are distinguished by the fact that the electric motor in them is located above the pumping part. This made it possible to reduce the dimensions of the housing, as well as connect the electrical cable to the upper part of the unit.

Advantages of water jet pumps

Submersible pumps of this brand have whole line advantages over similar models from other manufacturers. Thanks to them, they have earned numerous positive reviews. Among the advantages of these units are the following:

• The borehole and well pump of the Dzhileks brand works very quietly, which is important for country houses and dachas.
• Compact dimensions allow you to choose a unit for any well size.
• Unlike vibration models, submersible pumping units of the Vodomet series do not create turbulences in the water that raise silt and sand from the bottom.
• Acceptable cost, since the pumps are of domestic production.
• High performance and efficiency.
• The units can work even in dirty water with sand, silt or clay content within 2-5 kg/m³.
• Due to the washed motor (water circulates between the stator shell and the unit housing), the electric motor is effectively cooled.
• Another significant advantage is the use of two separate sealing parts in the design. They not only protect the electric motor from high pressure, but also ensure its tightness and separate oil filling of the internal parts.
• In models of the PROF series, the membrane and seal are protected (this function is not provided in other units).

Important to know: pumps must be lowered into the shaft of a hydraulic structure on steel cables. This is the only way to be sure of the reliability of fixation.

Varieties

All pumps of the Vodomet series can be divided into two types:

• well unit;
• borehole pump.

Dzhileks brand well pumps are suitable for use in relatively shallow structures (8-10 m). They can also be used in open reservoirs and various water tanks.

The main condition for the operation of such a unit is sufficient dimensions of the tank, well or reservoir. The thing is that it is necessary to install not only the pumping unit there, but also the float switch.

Many reviews say that the Vodomet well pump differs from the downhole unit in a number of advantages:

• The efficiency of such a device is much higher. Therefore, submersible pumps for wells with the same technical specifications will give greater productivity than similar downhole equipment.
• They are less sensitive to dirty, silty or sandy water than well pumps.
• In such models, it is not necessary to use protection against operation in the absence of water, since there is a simple float switch.
• The price of such units is in the range of $ 90-130, which is lower than the cost of pumping equipment for wells.

Models

Submersible pumping units of the Vodomet series are produced in various modifications. All of them are different technical parameters and power. Usually the marking of pumps of this brand looks like this - 55/50A (there may be other combinations of numbers). The letter designation "A" indicates that the pumping equipment is equipped with a float switch that produces automatic shutdown in the absence of water. The numbers in the designation indicate such characteristics:

• The first number is the flow rate of the pumping equipment at the outlet. It is measured in l/min. This value is determined with fully open taps, in conditions where there is no resistance to the movement of water.
• The second number is the maximum head that can be reached with fully screwed taps. Measured in meters.

Based on the marking, we can draw the following conclusions about the operation of units of various modifications:

1. Deep pumps 60/32 with a flow rate of 60 liters per minute will work more efficiently in water intake facilities with a small debit. At the same time, the performance of the hydraulic structure should not be lower than the performance of the pumping equipment. Otherwise, the pump can quickly pump all the water from the water intake and will work "dry". This can lead to failure of the unit.
2. A device marked 60/52 can provide water consumption of 35-40 liters per minute (more than 2 m³ per hour). This is equal to four faucets open at the same time.
3. A Gilex brand pump marked 60/72 with a similar water flow will provide a stronger pressure. Such units allow you to move water over longer distances, so they are suitable if the source is away from home.
4. The 115 liters per minute borehole pump is suitable for use in medium to high production wells. In this case, the debit of a hydraulic structure can be about 4 m³ per hour. Submersible pumping equipment model range 115/115 is one of the most powerful devices. The power of such pumps reaches 2200 kW.
5. For water supply of multi-storey buildings, it is better to use units with a flow rate of 150 l / min. They can only be installed in hydraulic structures with high performance. It is also better to use them when the water flow is more than 4 m³ per hour.

How to choose?

Of course, you can make a choice of a Water Jet pump model based on customer reviews, but it’s still worth doing a simple calculation yourself. To determine the required pressure of pumping equipment, it is necessary to take into account the required pressure in consumer taps. It is important not to forget about possible pressure losses in the pipeline, as well as the height difference between the consumer and the source.

• if this value is less than 5 m, then you can use a pumping unit with a pressure not higher than 35 m. Submersible pumping equipment Vodomet 55/35 is suitable for this purpose;
• if from the water mirror to the earth's surface within 5-25 m, you can buy a pump with a pressure of 40-50 m, for example, a pumping unit Vodomet 60/52;
• at a distance of 25-45 m, it is better to use a model with a pressure indicator in the range of 60-75 m. For these purposes, a submersible device Water cannon 60/72 is suitable;
• if from the water surface to the top of the earth 45-60 m, it is better to choose more powerful units with a pressure from 90 to 150 m. The device of the 115/115 model range will cope well with this task.

Operation and possible breakdowns

Since pumping equipment is completely submerged in water, it works in extreme conditions. Despite constant improvement, the pump can fail. The most common causes of breakdowns can be such phenomena:

• If the installation and use of the unit was carried out without following the recommendations and instructions of the manufacturer, then there is a high probability of a breakdown.
• Voltage fluctuations in the network can lead to the failure of pumping equipment.
• If the unit is constantly pumping very dirty water with a high content of sand particles, this will accelerate its wear and failure.

Important: a guarantee of a long service life deep pump – correct installation in a hydraulic structure. At the same time, the diameter casing pipe must be at least 100 mm. The unit must be completely submerged in water, but no more than 1.5 m from the bottom of the water intake.

To protect the well from foreign objects, the upper part of the casing string is closed with a special cap. To prevent freezing of water in winter period a caisson is constructed above the upper part of the casing pipe, and the pipeline is connected and laid to the house at a mark located below the freezing point of the soil.

Pumps of the Vodomet series are lowered into the well, suspended on a strong cable, to which it is attached on the sides power cable and a water hose. The cable is securely fixed at the top.

I think many will be interested to know more about the submersible pump Vodome, I will give you this opportunity in the form of a question - answer. There is little experience in answering these questions, questions were asked by our customers and after which this article about Vodomet pumps was compiled.

Question: Where is the multistage submersible centrifugal pump Vodomet (hereinafter Vodomet) used?

Answer: The water jet pumps water from a well, a well, from open water sources and delivers water through pipes for further use. Suitable for organization automatic system water supply in country house and for irrigation.

Question: What is the design of the submersible multi-stage centrifugal pump Water cannon?

Answer: The water jet has a hydraulic part and an electric motor. The hydraulic part has impellers, diffusers and shafts, while the electric motor has a stator and a rotor. Water is taken from the bottom of the pump, water enters through small filter holes. The water cannon is completed with a special cable and plug for connecting to the mains.

Question: How minimal inside diameter should there be a supply line in submersible pumps Vodomet?

Answer: The value of hydraulic resistance depends on the diameter of the supply pipe, the smaller the diameter. the higher the resistance. Minimum Diameter supply pipes for all submersible pumps should be at least 1 '' - 25 mm. When the diameter is narrowed and the flow through the pump is less than 10 l.min. you risk overheating the pump and it will burn out.

Question: What is the minimum depth of the Water Cannon in the water?

Answer: The pump can be lowered to a minimum depth of 15-20 cm from the suction side of the pump.

Question: What does the buyer need to know about, which is not always discussed during the sale, if a submersible pump supplies heavily polluted water when pumping a well for the first time?

Answer: When the pump pumps heavily polluted water, it is forbidden to turn it off, otherwise its impellers can simply jam due to sand settling from the pressure pipe. He should be allowed to work. The pump can be turned off only after it goes out of the line pure water. In the process of pumping a well with a Vodomet pump, the pump pumps water with a high content of sand, sand can exceed the norm several times, which means that there is a high probability of wear of anti-friction washers. After pumping the well, I recommend to make Maintenance pump by contacting a specialized service center.

Question: Due to which a high throughput of impurities is ensured among domestic and even imported household submersibles. borehole pumps?

Answer: This is achieved by "floating" impellers and increased axial and radial clearances. It is due to this feature that the pump is able to pass through itself up to 2 kg of impurities per 1 m³ of water.

Question: How long can the water jet pump run continuously?

Answer: The pump can be operated in continuous mode, the pump is cooled by the flow of water pumped through itself.

Question: What is the maximum number of starts allowed per hour for the Vodomet pump?

Answer: The maximum number of inclusions is no more than 20 inclusions / hour.

Question: Is it possible to use the pump Vodomet 60/52 A in a well?

Answer: Submersible pumps Vodomet with index "A" are used only in wells, tanks or open water. It is not advisable to use it in a well, since the pump with the “A” index is equipped with a float electric valve to turn the pump on and off as water enters. A pump with a valve may simply not fit into the well.

Question: Where to locate and why you need a mechanical check valve on the pump?

Answer: The non-return valve is installed no more than 7 meters from the pump or directly on the pump. I recommend installing an additional check valve at the accumulator to reduce water hammer in the water supply system.

Question: What should be the minimum allowable distance of the intake part of the pump to the bottom of the well or well?

Answer: The distance must be at least 1 meter.

Question: What is the minimum volume of the accumulator to be installed autonomous system water supply using a water jet pump?

Answer: The volume of the accumulator must be at least 50 liters. But the accumulator can be selected and accurately using the formula. Provided that you know the maximum volume of water that you will consume (Amax liters / min.), As well as the power of the submersible pump, knowing these parameters, you can supply water, using the table, select the appropriate volume of the accumulator Vt. Or use the calculator -

Vt- this is the volume of the tank, liters;

A max– maximum volume of consumed water, liters/min.;

Pmin- the minimum pressure at which the pump starts;

P max- the maximum pressure at which the pump is switched off;

R pres- initial pressure in the tank;

TO- coefficient corresponding to P pump power.

The pressure values ​​in the table are expressed in bar.

Question: Do I need a stabilizer for the Waterjet pump to work? How to choose the right stabilizer?

Answer: The stabilizer equalizes the voltage in the mains to the nominal value of 220-230V. A voltage stabilizer is selected based on the power of the submersible pump. The pump power is multiplied by the factor "3", the power of the required stabilizer is obtained.

For example: The power of the submersible pump "Vodomet" 60/92 is 1100W * coefficient "3" = 3300 watts.

You will need a voltage stabilizer with a power of 3500 watts.

Question: I want to increase the length of the pump cable, will it be necessary to increase its cross section, why?

Answer: By increasing the length of the cable, it is also necessary to increase its cross section, because when you increase the length of the cable, the voltage drop on the pump itself also increases.

Selection table for electric cable section

open wiring						Cable section, mm2	closed wiring
Copper			Aluminum				Copper			Aluminum
Current, A	power, kWt		Current, A	power, kWt			Current, A	power, kWt		Current, A	power, kWt
	220 in	380 in		220 in	380 in			220 in	380 in		220 in	380 in
11	2,4	—	—	—	—	0,5	—	—	—	—	—	—
15	3,3	—	—	—	—	0,75	—	—	—	—	—	—
17	3,7	6,4	—	—	—	1,0	14	3,0	5,3	—	—	—
23	5,0	8,7	—	—	—	1,5	15	3,3	5,7	—	—	—
26	5,7	9,8	21	4,6	7,9	2,0	19	4,1	7,2	14	3,0	5,3
30	6,6	11	24	5,2	9,1	2,5	21	4,6	7,9	16	3,5	6,0
41	9,0	15	32	7,0	12	4,0	27	5,9	10	21	4,6	7,9
50	11	19	39	8,5	14	6,0	34	7,4	12	26	5,7	9,8
80	17	30	60	13	22	10	50	11	19	38	8,3	14
100	22	38	75	16	28	16	80	17	30	55	12	20
140	30	53	105	23	39	25	100	22	38	65	14	24
170	37	64	130	28	49	35	135	29	51	75	16	28

Question: How are centrifugal, vibrating and vortex pumps different?

Answer:

• Centrifugal pumps has a long service life, high throughput on impurities (sand) and high efficiency.
• vibration pump reduces the life of the water supply source (well, well), it breaks aquifers, well walls, wells, has elevated level noise, short lifespan, and poor performance.
• vortex pump combines the properties of centrifugal and volumetric machines, so the vortex pump provides high efficiency. Nevertheless, this type of pumps is characterized by a change in efficiency over time, because the hydraulic part of the pump has small axial and radial clearances. After the ingress of impurities (sand), the wear of its working surface reduces the flow-pressure characteristic.

Question: I'm going to cut the pump's plug, will the warranty still be valid?

Answer: If it is necessary to cut the electrical cable, for example, it is necessary to pass the electrical cable through the head or simply lengthen it, in this case the warranty remains valid. Be sure to use a heat shrink sleeve to connect the electrical cable.

Wiring diagram for a submersible multistage centrifugal pump Vodomet

Do you have a water pump? Everything suits me? Write in the comments about the experience of using this pump.

The Russian company "Dzhileks" produces equipment for the organization of water supply, heating and sewerage. Among the wide variety of products, a special place is occupied by pumps that pump water from underground wells, wells and open reservoirs. These products can be seen in large industrial and agricultural enterprises and in everyday life.

For example, a Gileks pump for a well will help organize the supply drinking water private house or cottage. There is also equipment that will raise water from a deep well, and if necessary, you can use it to irrigate gardens.

The main feature of the equipment of a young and rapidly developing company is the use modern technologies, simplicity, quality and reliability. All pumps are fully adapted to the harsh conditions of the Russian climate and water composition.

Pumps are less expensive than foreign analogues, many components and components are Gilex's own development. Along with this, high-tech parts supplied from other countries are widely used, which are distinguished by high-quality technical characteristics. The presence of reliable automation can protect devices from damage in emergency cases.

The range of products impresses with its breadth and areas of application:

• drinking water pumps;
• sewerage;
• pumping other types of liquids;
• irrigation of crop areas.

Dzhileks pumps for pumping water from a well

These units are mainly used for open water sources with a large area - wells, individual reservoirs and natural reservoirs. It is in such places that it is easier to pump water and place additional equipment in the form along with the pump. The electric motors of these pumps are protected from water ingress and contain a so-called cooling jacket. In private houses and cottages, they are used quite often.

The principle of operation of the float switch is simple - if the water level falls below a certain mark, then the float drops and opens the contacts of the pump motor. This ensures the safety of the product in such a situation.

Similar products are marked as follows - Water cannon PROF 55/35 A, where the first digit 55 indicates the flow rate, measured in liters per minute, and the second digit indicates the pressure, which is also measured in liters. The letter "A" means automatic, that is, the use of a float switch. Depending on the design and diameter of the casing, the parameters of the pump may be different.

Advantages of pumps for wells:

• high efficiency;
• reliability and durability;
• low prices - from 7 to 11 thousand rubles, depending on the capacity;
• the ability to pump water with sufficiently large impurities and sand particles;
• the use of materials that do not impair the quality of drinking water.

Well pumps

They are centrifugal type devices with so-called "floating" impellers. They are used in deep sources of drinking water, and can also be used in wells. The case diameter of these products is 98 millimeters, made of high quality stainless steel, the electric motor is in an oil cup, which ensures its cooling and stability of operating parameters.

These units are used in wells with a depth of no more than 30 meters. They are powerful and high performance. There are pumps for marginal underground sources, where the amount of replenished water is small, and there are pumps for pumping large volumes of water.

Benefits of borehole water cannons Gileks:

1. High efficiency, and hence good technical characteristics.
2. Using the principle of centrifugal force is more beneficial not only in terms of pump efficiency, but also saves the well itself. For example, vibration products, in addition to great noise, create soil vibrations, which can lead to the destruction of the well and its tightening with sand.
3. Ability to pump water with a high content of foreign particles.
4. Profitability.
5. Reliability and durability due to double protection of the product - from high water pressure and sealing of the electric motor.
6. Ease of maintenance and operation.
7. Prices are also very democratic - from 7 to 17 thousand rubles.

Water supply system "Chastotnik"

Submersible type pumps Dzhileks "Chastotnik" are designed to create an autonomous water supply with constant water pressure, mainly for residential buildings and dachas. And this is achieved by using a filling tank (hydraulic accumulator) with a control unit.

In fact, the principle of operation of these units resembles pumping station, with the only difference that it is used on the surface, and the submersible pump is at depth. At the top there is only a hydraulic accumulator and a control unit that controls and controls the operation of the electric motor, a system for maintaining a given level of water pressure.

Many people ask why this system is called a chastotnik. It's simple - in the control unit there is a frequency converter, the functions of which are to provide soft start electric motor and maintaining the required water pressure.

The submersible household pump "Vodomet" of the Gileks brand has a number of undoubted advantages:

1. Creation of uninterrupted water supply.
2. Economy due to use storage tank and control unit.
3. Durability and reliability.
4. Low noise level unlike a conventional pumping station.
5. Protection of the main parts and details from overloads in the electrical network.

Submersible pumps of the "Chastotnik" system can operate at a well depth of up to 30 meters. The letter "Ch" has been added to the product labeling. For example, the designation of a similar design is the Water Cannon PROF 115/95 H, here the first numbers indicate the water flow in liters per minute, and the second part indicates the magnitude of the water pressure in meters.

The cost of these products ranges from 29 to 39 thousand rubles.

How to choose a Gilex pump

When choosing pumps for pumping water, a homeowner should consider the following factors:

1. Depth, diameter of the well.
2. The quality characteristics of drinking water, in particular, it is worth paying attention to the content of impurities of silt and sand. If they are more than normal, then any device of this type may fail prematurely.
3. The state of the electrical network, especially the frequency and magnitude of power surges.
4. And, of course, the price. However, choosing a cheaper model does not always mean its durability and reliability.

Some tips before buying a Gilex pump:

1. Many homeowners do not always delve into the depth of the issue - it seems to them that they bought the unit, installed it, and it should work properly for decades. However, the pump is a device that runs on electric current, the instability of its parameters may cause damage or deterioration of performance. Therefore, knowing domestic electrical networks, you should take care of purchasing a voltage stabilizer, which, among other things, will save all other appliances that consume electricity in the house.
2. You should not buy the most powerful pump, as this is not always economically feasible. In addition, if water is not collected in the well so quickly, that is, its low productivity, then this will not lead to anything good. Such a unit will quickly pump out the contents of the well, and then it will run idle - there is a possibility of its failure.
3. The composition of the water also affects the performance of the Gilex pump, like any other similar device. On the forums you can often see negative reviews about Gilex pumps, often all the comments boil down to the fact that it fails due to the high content of iron, lime and sand impurities. Even if you install an expensive imported pump famous brand, then it will also fail without taking into account and analyzing the water content in the well. And for some reason, some people are accustomed to speak negatively about domestic products. And often they are not worse than foreign goods.

Therefore, only taking into account all the norms and requirements for pumping equipment will help you choose the best product that will last for many years.

It is not enough to dig a well or a well. You should take care of how to supply water to the house, garden and other places. The water pump is designed for this purpose. The pump manufacturer is Dzhileks, a domestic leader in the manufacture of water pumps and related equipment.

Where can I use Gilex Water Cannon:
open waters,
wells,
wells,
various water tanks.

From the sources, water is supplied to the automatic water supply systems of the house, for watering the garden and garden, or for other purposes at the discretion.

Due to the layout features, the Gileks Water Meter pump can be placed at a depth of 100-150 mm from the water surface, and can also be used in a horizontal position. It is perfect for working in open and shallow sources.

How does a water pump work?

All Gilex models have a similar device principle. The stainless housing houses the pump part and the electric motor, which is washed by water. The rest of the parts are fixed with an intermediate support. The case is closed with covers on both sides.

The pump motor is filled with oil. The thermal relay is located outside the oil-filled cavity, which simplifies the repair of the part.

Depending on the model, the Waterjet pump may have different number repetitive steps. The parts of the device are divided into four components:
Cup.
The bottom of a glass.
Anti-friction washer.
Impeller.

The impellers rotate in the glass. And the cylinders are fixedly fixed between the cover and the plastic ring.

Device advantages

The manufacturer took care of human health. All parts of the Gileks water jet pump that come into contact with water are made of environmentally friendly and safe materials that do not affect water quality.

Some models of the Jilex Water Jet device have a removable filter. Its purpose is to protect the system from dirt, clay and sand. The filter extends the life of this equipment. If it gets dirty, you can clean it yourself. Also, the fence mesh has a large area. Water will fully flow even if the pump was lowered to the very bottom of the source.

The bottom cover has a conical shape. This design makes it easier to submerge the pump, it will not cling to possible casing connections.

The power cable can be pulled through the cover on top of the pump. Thanks to new design device it can be effectively used in wells with a small casing diameter.

The engine of the Gileks water jet pump is cooled thanks to the duct cold water between stator and housing.

Automation, which is built into the pump system, excludes its operation in idle mode. This function protects the engine from overheating, which prolongs its service life.

The thermal relay built into the pump motor determines the oil heating temperature and, if the norm is exceeded, stops the operation of the device.

Borehole pump "Vodomet" of the company "Dzhileks" proved to be the most adapted in comparison with similar units foreign production. This is not surprising. Any mechanism is designed to work in certain conditions. The same is true with pumps. Domestic "Vodomet" is designed to work with our water, which differs from foreign in many ways.

The line of pumps "Dzhileks"

The production of submersible borehole pumps "Vodomet" is one of the main activities of the company. As a result of painstaking work, new models of pumping units have been created.

A variety of submersible pumps "Vodomet"

They have very significant differences from similar models from other manufacturers:

• high efficiency;
• increased durability of work;
• decreased sensitivity to dirty water;
• lack of vibration;
• the presence of a "washed" electric motor.

In addition to those listed, there are a number of other differences that are characteristic only for Vodomet products. Some will be discussed a little later.

efficiency (coefficient useful action). For "Water cannons" it is higher than for similar models. The increase was achieved due to the absence of reciprocating motion and the installation of "floating" injection wheels.

The durability of the unit is increased due to the absence of valves and pistons, which are characterized by rapid abrasion during operation.

Sensitivity to dirty water is significantly reduced due to the presence of a mesh filter and a special arrangement of through channels that have the ability to self-clean.

The absence of vibration is achieved by the presence of several impellers. All of them are balanced when the pump is assembled.

The "washed" electric motor is absolutely protected from overheating.

Interesting to know. Produced models of pumps "Vodomet" are constantly being improved. Created new system seals, eliminating the violation of the sealing of the rotating units of the unit.

Design features

The submersible pump "Vodomet" has significant differences in comparison with its foreign counterparts. First of all, it is necessary to pay attention to the installation of reinforced bearings on rotating parts. This ensures their trouble-free operation in conditions of high water pollution with sand particles or sedimentary solids.

Submersible pump "Vodomet", scheme

The next not unimportant feature is the optimization of flow channels and impellers. The result is the elimination of the possibility of clogging the pump as a whole. Additionally, the self-cleaning system contributes to this.

The electric motor of the unit is located on top. This arrangement made it possible to significantly reduce the diameter of the entire case, and bring the power cord out from above. Due to this, the size of the water well has also decreased. And this is already a tangible reduction in investments for its installation.

Another feature that is unique to the "Vodomet" is "floating" impellers. Without going into technical aspects, suffice it to say that such an innovation leads to an increase in pump performance and pressure, as well as to a decrease in the electricity consumed by it.

By the way, the electric motor of the unit during its operation is cooled by water passing through a specially made annular slot inside the housing. Overheating of the engine is not terrible, the unit can be operated without turning off for a long time.

Important. The pump is produced by a Russian manufacturer and is adapted to work with our water.

Model range of pumps

For small wells equipped for country houses or cottages, the company's design bureau has developed a number of borehole pumps of the Dzhileks series.

Water cannon pump

They are compact and at the same time have the power to lift water from a depth of several tens of meters. Most units allow you to pump out water in automatic mode. If necessary, they can work without automation.

A wide range of water pumping units will satisfy the taste of any consumer. This is evidenced by the technical characteristics of submersible pumps, presented in the table:

Main characteristics

Models that do not have an automatic mode of operation do not require a special mode of operation. They easily withstand 20 inclusions per hour. In this case, the possibility of engine overheating is completely eliminated.

The next popular group of Dzhileks submersible pump models are models capable of operating in automatic mode. These units do not require human intervention at all. They turn on independently when the water pressure in the system drops, or in the case when the water level in the tank drops more than allowed. And vice versa, they turn off at the moment of reaching the set pressure or its increase above the norm. Their characteristics do not differ from those without automatic control, although the range of models is somewhat expanded.

The principle of operation in automatic mode is the current position of the float switch or the pressure in the chamber of the pumping station.

Popular Models

To fill containers and irrigate plantings, a pumping unit of the Vodomet PROF 55-35 model is quite enough. It can be used in open water bodies with a partial depth of 10-15 cm. It is not recommended for automatic water supply.

Borehole pump "Dzhileks" "Vodomet Prof" 55-50 is one of the most popular models of the company. It supplies water to a height of 50 meters. One of the advantages is the possibility of lowering it to a depth of up to 30 m. It is absolutely silent and economical in operation. Maintenance free. Ideal for autonomous water supply system country house or cottage. A more advanced model "Vodomet" PROF 55-90 allows installation in wells up to 95 meters deep.

The downhole pump "Vodomet" PROF 40-50 has a capacity of 40 l / min, therefore it is used in wells with a small debit. Is one of the best options country house applications.

Submersible pump "Vodomet" 60-32 is an analogue of the considered model. After modernization, it is able to pump out water containing up to 2 kg of sand per 1 m³. As a result of using modern materials in rubbing parts and competent constructive solutions little wear. Able to lift water from a depth of 90 meters.

Other models of pumps "Vodomet" are structurally similar to those considered. They differ in technical characteristics - power, performance and others. Specific figures can be seen in the table and the “Pump Operating Instructions”. Detailed information must be given by the sales assistant when purchasing the unit.

Pump installation

The submersible pump for the well of the company "Dzhileks" is installed in the water supply system similarly to other downhole units. From the correct installation in the future will depend on the performance of the entire water supply system. Install the pump carefully, following all recommendations for its installation. The most unpleasant thing that can happen as a result of installation errors is drilling a new well and installing another pump.

To exclude the possibility of such a situation, it is necessary:

1. Install pumping equipment.
2. Install check valve.
3. Make sure the pump is assembled correctly.
4. Lower the pump into the well.
5. Fasten the cable to the head.

Installation of pumping equipment. It is carried out on the surface. A cable is attached to the pump, a cable is unwound, a pipeline is connected.

Check valve. Protects the entire water supply system from water hammer. Attached either directly to the pump housing or in the pipeline.

Correct assembly. All connections are checked, the insulation of the twisted wires, the fastening of the clamps.

Lowering the pump into the well performed smoothly, without jerks. After lowering to a predetermined depth, the safety cable is securely fixed to the head.

For more information on preparing for the installation of the pump, see the video at the end of the article.

Note. Holding the pump during the descent is carried out only by the cable.

The downhole pump "Vodomet" is gaining more and more popularity in the consumer market. The high quality of the product, ease of installation and reliability in operation make it indispensable in the autonomous water supply of private houses. The multi-vector design allows the use of Dzhileks products not only in wells, but also in wells and open water bodies.

Don't forget to rate the article.