Pumps Vodomet. Submersible pumps Dzhileks Vodomet for wells and wells Submersible pump for wells Dzhileks vodomet

  • 04.03.2020

A downhole pump, by definition, cannot be cheap. When working in a filter well, it is regularly exposed to particles of sand and silt, and water has to be delivered from artesian structures to a sufficiently high height.

In search of a reliable device at an affordable price, owners of private plots most often choose a water pump manufactured by Dzhileks. In this material, we will consider in detail the device and the principle of operation of the equipment, we will talk about the features of its selection and use.

Pumps "Vodomet" have a fairly wide range of applications. With their help, you can pump water from wells of various depths, as well as from wells and open reservoirs.

They perfectly cope with the autonomous water supply of a private house, are used for watering the site, garden, etc. In this case, the diameter of the well should be 100 mm or more.

The case is made of high quality stainless steel. The top point of the pump is sealed in such a way that during its operation sand and other contaminants do not enter the casing from above.

The pump motor is enclosed in a sealed glass filled with oil. This design eliminates Negative influence external factors and protects the engine from damage.

The design and dimensions of the “Vodomet” pump allow it to be installed in wells with a casing pipe with a diameter of 100 mm or more

The device is oil-filled, asynchronous, the motor rotor is squirrel-cage, mounted on rolling bearings. The motor is partially protected from overheating by a thermal protector built into the stator winding. In addition, an additional cooling factor is water passing through a special annular gap left between the housing and the motor stator.

To balance the external and internal pressure of the engine, a special membrane is used. This allows the motor seal to be unloaded. As a result specifications allow you to use the pump "Vodomet" at a depth of up to 30 meters. The top and bottom covers are arranged in such a way that all components of the device are in correct position about the central axis.

An important feature of the pump design is the presence of so-called “floating” impellers, which have the ability to run in. The efficiency of traditional pumping equipment largely depends on the size of the clearance that forms between its moving and static parts.

The larger such a gap, the more internal fluid leakage occurs inside the device, and the lower its efficiency. During the operation of the pump, the moving elements are gradually erased, which increases the clearance, and the efficiency becomes even lower. The design of the "floating" impellers of the "Vodomet" pump gives them the ability to move in the axial direction.

Deciphering the markings of various models

The marking of the pump in the form of letter indices reflects the design features of individual models:

  • "BK"– the cable length of this model is 1 m.
  • "A"(automatic) - the presence of a float switch that prevents the situation of "dry running".
  • "PROF"– pumps for wells without an automatic shutdown system.
  • "M"(main) - equipped with a fitting that allows you to use the pump on the surface, as an element of the water supply system.
  • "HOUSE"- additionally equipped with components for the organization of automated water supply of a private house.
  • "H"- Availability electronic system automatic control pump.

Devices marked with the index “A” can be installed in wells or other structures where there is sufficient free space for mounting a float switch.

The pump "Vodomet" for a well is a multi-stage equipment with floating impellers washed by water. Water cooling is one of the important factors which prolongs the life of the device.

Description

The design includes a built-in condenser, which is necessary for supplying water from the well. His inner diameter may be 100 mm or more. It is noteworthy that such a device is suitable for working in wells that contain an increased amount of sand. These pumps can be used with the level control of the tank or the level of liquid pumped out from the automatic pressure control system. Not only a well, but also an open reservoir, as well as a well can act as a source of water supply.

Feedback on the choice of model

If you decide to purchase a Vodomet pump for a well, you should be aware of the criteria by which this equipment is selected. According to users, it is important to pay attention to the numerical designation, the first digit indicates the maximum one minute output in the absence of flow resistance. Looking at the second number, you can understand what is the maximum head in meters developed by the equipment when working "to a dead end".

If you have a pump of the Vodomet 60/52 brand in front of you, then, according to buyers, this indicates that with a free spout, the equipment is capable of supplying 60 liters of water per minute. This volume is equivalent to 3.6 cubic meters per hour, while when the supply is cut off, the pressure will be 52 meters, that is, 5.2 atmospheres. This unit is almost never used in the limit mode, most often it is operated at the operating point.

The pump "Vodomet" for a well with a maximum flow rate of 115 liters per minute is used for wells and wells with an increased and average flow rate. If there is a need to select equipment for water sources with a high flow rate, then you should purchase an option with a maximum flow rate of 150 liters.

General characteristics of submersible type devices

The submersible pump "Vodomet" for the well has a high coefficient useful action he is ready to serve long time. This equipment has a powerful electric motor cooling system. The design of the pump has a cable that can be pulled through the top cover, which allows the equipment to be used in wells of even the smallest diameter

It is noteworthy that these submersible pumps can operate continuously for a long time, this became possible due to the presence of a built-in water "jacket". It provides water passage between the motor stator and the housing. "Water cannon" is capable of supplying liquid from shallow or great depths. The devices have good tightness and are equipped with a thermal protector, which is responsible for the temperature of the equipment.

Characteristics of the pump brand "Vodomet prof 60/32"

If you are interested in the products of the brand "Vodomet", the pump for the well "Prof 60/32" can be purchased by you. It belongs to the high performance series. Such equipment is suitable for water with a significant sand content. It can only be used in those wells whose depth does not exceed 30 meters. The temperature of the liquid should not be more than 35 degrees.

Consumers who decide to purchase this equipment should be interested in the power of the submersible pump, which is 470 watts. In one minute, it will be able to produce 60 liters of liquid, the maximum amount of pumped sand will be equal to 2 kilograms per cubic meter of water. The products of the brand "Vodomet" have long become popular with Russian consumers, the pump for the well "Prof 60/32" is a confirmation of this. Its body is made of high quality stainless steel, which ensures a long service life of the device. However, in the process of using the unit, you must remember that the pressure should not be higher than 3.2 bar.

Characteristics of the pump brand "Prof 55/50"

When you visit the store, you can find large assortment goods that are manufactured under the brand "Vodomet". The 55/50 well pump can be considered as an example. The depth of its immersion is 30 meters, the power is 680 watts. The equipment must be installed vertically. As practice shows, the engine runs silently, and it is capable of pumping out 3.3 cubic meters per hour. Do not use this equipment for dirty water, otherwise it may be damaged. The size of the particles to be filtered can be up to 1.5 mm and the length of the power cord is equivalent to 20 meters. This information will help you when installing the device.

Characteristics of the pump brand "Dzhileks Vodomet 115/115"

If you are interested in the Vodomet brand, you can purchase a pump for a well 115/115 for 14,300 rubles. This submersible equipment is designed to pump water from a well, while the liquid may be slightly contaminated. The maximum depth, as in the above case, is 30 meters. Productivity is 6900 liters per hour. The advantage is that the device can also be used for small wells. With it, you can water the garden or garden, among other things, it is suitable for water supply in homes. The weight of the unit is 22.6 kilograms, which makes it easy to install.

This pump "Dzhileks" for a well, the photo of which is presented in the article, has a fairly wide area of ​​​​use. It can be used in tanks, as well as open reservoirs. The equipment is perfectly adapted to difficult Russian conditions. To create it, the manufacturer uses durable and wear-resistant materials. For example, granite and ceramics are selected for. With regard to such important element, as impellers, a wear-resistant polymer is used for them.

The Russian company "Dzhileks", located in the village of Klimovsk, Moscow Region, produces submersible multistage pumping units. Water cannon pumps are manufactured to provide independent water supply to a private house and garden watering. Moreover, the range of equipment of this brand is represented by a whole set of household appliances that have different power and dimensions. Thanks to such a large selection, the buyer can choose a model that provides the required amount of water.

All submersible pumping units of the Vodomet series are manufactured at domestic enterprises, therefore, even at the development stage, they contain parameters that allow them to adapt the equipment to work in the conditions of domestic water supply systems. This is especially important, since our waterways are not as clean as foreign ones.

Borehole pumps of this series are able to pump even dirty water with impurities up to 300 g per m³. For the production of guides and impellers, the manufacturer uses a special LEXAN polymer. And for the manufacture of thrust bearings, ceramics and graphite are used. Thanks to such innovative additions, the wear resistance of the units increases, their service life increases, and the likelihood of breakdowns is minimized.

At the same time, downhole units of the Dzhileks brand are practically not subject to clogging, since they have a self-cleaning function. It is not surprising that such pumps can only be heard about positive reviews, because in addition to domestic nodes, they use parts of American, French, Swedish, German and Italian production.

The performance and design of pumps of this brand are constantly being improved. For example, new models are distinguished by the fact that the electric motor in them is located above the pumping part. This made it possible to reduce the dimensions of the housing, as well as connect the electrical cable to the upper part of the unit.

Advantages of water jet pumps


Submersible pumps of this brand have whole line advantages over similar models from other manufacturers. Thanks to them, they have earned numerous positive reviews. Among the advantages of these units are the following:

  • The borehole and well pump of the Dzhileks brand works very quietly, which is important for country houses and dachas.
  • Compact dimensions allow you to choose a unit for any well size.
  • Unlike vibration models, submersible pumping units of the Vodomet series do not create turbulences in the water that raise silt and sand from the bottom.
  • Acceptable cost, since the pumps are of domestic production.
  • High performance and efficiency.
  • The units can work even in dirty water with sand, silt or clay content within 2-5 kg/m³.
  • Due to the washed motor (water circulates between the stator shell and the unit housing), the electric motor is effectively cooled.
  • Another significant advantage is the use of two separate sealing parts in the design. They not only protect the electric motor from high pressure, but also ensure its tightness and separate oil filling of the internal parts.
  • In models of the PROF series, the membrane and seal are protected (this function is not provided in other units).

Important to know: pumps must be lowered into the shaft of a hydraulic structure on steel cables. This is the only way to be sure of the reliability of fixation.

Varieties


All pumps of the Vodomet series can be divided into two types:

  • well unit;
  • borehole pump.

Dzhileks brand well pumps are suitable for use in relatively shallow structures (8-10 m). They can also be used in open reservoirs and various water tanks.

The main condition for the operation of such a unit is sufficient dimensions of the tank, well or reservoir. The thing is that it is necessary to install not only the pumping unit there, but also the float switch.

Many reviews say that the Vodomet well pump differs from the downhole unit in a number of advantages:

  • The efficiency of such a device is much higher. Consequently, submersible pumps for wells with the same technical characteristics will give greater productivity than similar downhole equipment.
  • They are less sensitive to dirty, silty or sandy water than well pumps.
  • In such models, it is not necessary to use protection against operation in the absence of water, since there is a simple float switch.
  • The price of such units is in the range of $ 90-130, which is lower than the cost of pumping equipment for wells.

Models


Submersible pumping units of the Vodomet series are produced in various modifications. All of them are different technical parameters and power. Usually the marking of pumps of this brand looks like this - 55/50A (there may be other combinations of numbers). The letter designation "A" indicates that the pumping equipment is equipped with a float switch that produces automatic shutdown in the absence of water. The numbers in the designation indicate such characteristics:

  • The first number is the flow rate of the pumping equipment at the outlet. It is measured in l/min. This value is determined with fully open taps, in conditions where there is no resistance to the movement of water.
  • The second number is the maximum head that can be reached with fully screwed taps. Measured in meters.

Based on the marking, we can draw the following conclusions about the operation of units of various modifications:

  1. Deep pumps 60/32 with a flow rate of 60 liters per minute will work more efficiently in water intake facilities with a small debit. At the same time, the performance of the hydraulic structure should not be lower than the performance of the pumping equipment. Otherwise, the pump can quickly pump all the water from the water intake and will work "dry". This can lead to failure of the unit.
  2. A device marked 60/52 can provide water consumption of 35-40 liters per minute (more than 2 m³ per hour). This is equal to four faucets open at the same time.
  3. A Gilex brand pump marked 60/72 with a similar water flow will provide a stronger pressure. Such units allow you to move water over longer distances, so they are suitable if the source is away from home.
  4. The 115 liters per minute borehole pump is suitable for use in medium to high production wells. In this case, the debit of a hydraulic structure can be about 4 m³ per hour. Submersible pumping equipment model range 115/115 is one of the most powerful devices. The power of such pumps reaches 2200 kW.
  5. For water supply of multi-storey buildings, it is better to use units with a flow rate of 150 l / min. They can only be installed in hydraulic structures with high performance. It is also better to use them when the water flow is more than 4 m³ per hour.

How to choose?


Of course, you can make a choice of a Water Jet pump model based on customer reviews, but it’s still worth doing a simple calculation yourself. To determine the required pressure of pumping equipment, it is necessary to take into account the required pressure in consumer taps. It is important not to forget about possible pressure losses in the pipeline, as well as the height difference between the consumer and the source.

  • if this value is less than 5 m, then you can use a pumping unit with a pressure not higher than 35 m. Submersible pumping equipment Vodomet 55/35 is suitable for this purpose;
  • if from the water mirror to the surface of the earth within 5-25 m, you can buy a pump with a pressure of 40-50 m, for example, a pumping unit Vodomet 60/52;
  • at a distance of 25-45 m, it is better to use a model with a pressure indicator in the range of 60-75 m. For these purposes, a submersible device Water cannon 60/72 is suitable;
  • if from the water surface to the top of the earth 45-60 m, it is better to choose more powerful units with a pressure of 90 to 150 m. The device of the 115/115 model range will cope well with this task.

Operation and possible breakdowns


Since pumping equipment is completely submerged in water, it works in extreme conditions. Despite constant improvement, the pump can fail. The most common causes of breakdowns can be such phenomena:

  • If the installation and use of the unit was carried out without following the recommendations and instructions of the manufacturer, then there is a high probability of a breakdown.
  • Voltage fluctuations in the network can lead to the failure of pumping equipment.
  • If the unit is constantly pumping very dirty water with a high content of sand particles, this will accelerate its wear and failure.

Important: a guarantee of a long service life deep pumpcorrect installation in a hydraulic structure. At the same time, the diameter casing pipe must be at least 100 mm. The unit must be completely submerged in water, but no more than 1.5 m from the bottom of the water intake.

To protect the well from foreign objects, the upper part of the casing string is closed with a special cap. To prevent freezing of water in winter period a caisson is constructed above the upper part of the casing, and the pipeline is connected and laid to the house at a mark located below the freezing point of the soil.

Pumps of the Vodomet series are lowered into the well, suspended on a strong cable, to which it is attached on the sides power cable and a water hose. The cable is securely fixed at the top.

Borehole pump "Vodomet" of the company "Dzhileks" proved to be the most adapted in comparison with similar units foreign production. No wonder. Any mechanism is designed to work in certain conditions. The same is true with pumps. Domestic "Vodomet" is designed to work with our water, which differs from foreign in many ways.

The line of pumps "Dzhileks"

Production of submersible borehole pumps"Vodomet" is one of the main activities of the company. As a result of painstaking work, new models of pumping units have been created.

A variety of submersible pumps "Vodomet"

They have very significant differences from similar models from other manufacturers:

  • high efficiency;
  • increased durability of work;
  • decreased sensitivity to dirty water;
  • lack of vibration;
  • the presence of a "washed" electric motor.

In addition to those listed, there are a number of other differences that are characteristic only for Vodomet products. Some will be discussed a little later.

Efficiency (coefficient of performance). For "Water cannons" it is higher than for similar models. The increase was achieved due to the absence of reciprocating motion and the installation of "floating" injection wheels.

The durability of the unit is increased due to the absence of valves and pistons, which are characterized by rapid abrasion during operation.

Sensitivity to dirty water is significantly reduced due to the presence of a mesh filter and a special arrangement of through channels that have the ability to self-clean.

The absence of vibration is achieved by the presence of several impellers. All of them are balanced when the pump is assembled.

The "washed" electric motor is absolutely protected from overheating.

Interesting to know. Produced models of pumps "Vodomet" are constantly being improved. Created new system seals, eliminating the violation of the sealing of the rotating units of the unit.

Design features

The submersible pump "Vodomet" has significant differences in comparison with its foreign analogues. First of all, it is necessary to pay attention to the installation of reinforced bearings on rotating parts. This ensures their trouble-free operation in conditions of high water pollution with sand particles or sedimentary solids.

Submersible pump "Vodomet", scheme

The next not unimportant feature is the optimization of flow channels and impellers. The result is the elimination of the possibility of clogging the pump as a whole. Additionally, the self-cleaning system contributes to this.

The electric motor of the unit is located on top. This arrangement made it possible to significantly reduce the diameter of the entire case, and bring the power cord out from above. Due to this, the size of the water well has also decreased. And this is already a tangible reduction in investments for its installation.

Another feature that is unique to the "Vodomet" is "floating" impellers. Without going into technical aspects, suffice it to say that such an innovation leads to an increase in pump performance and pressure, as well as to a decrease in the electricity consumed by it.

By the way, the electric motor of the unit during its operation is cooled by water passing through a specially made annular slot inside the housing. Overheating of the engine is not terrible, the unit can be operated without turning off for a long time.

Important. The pump is released Russian manufacturer and adapted to work with our water.

Model range of pumps

For small wells equipped for country houses or cottages, the company's design bureau has developed a number of borehole pumps of the Dzhileks series.

Water cannon pump

They are compact and at the same time have the power to lift water from a depth of several tens of meters. Most units allow you to pump out water in automatic mode. If necessary, they can work without automation.

A wide range of water pumping units will satisfy the taste of any consumer. This is evidenced by the technical characteristics of submersible pumps, presented in the table:

Main characteristics

Models that do not have an automatic mode of operation do not require a special mode of operation. They easily withstand 20 inclusions per hour. In this case, the possibility of engine overheating is completely eliminated.

The next popular group of Dzhileks submersible pump models are models capable of operating in automatic mode. These units do not require human intervention at all. They turn on independently when the water pressure in the system drops, or in the case when the water level in the tank drops more than allowed. And vice versa, they turn off at the moment of reaching the set pressure or its increase above the norm. Their characteristics do not differ from those without automatic control, although the range of models is somewhat expanded.

The principle of operation in automatic mode is the current position of the float switch or the pressure in the chamber of the pumping station.

Popular Models

To fill containers and irrigate plantings, a pumping unit of the Vodomet PROF 55-35 model is quite enough. It can be used in open water bodies with a partial depth of 10-15 cm. It is not recommended for automatic water supply.

Borehole pump "Dzhileks" "Vodomet Prof" 55-50 is one of the most popular models of the company. It supplies water to a height of 50 meters. One of the advantages is the possibility of lowering it to a depth of up to 30 m. It is absolutely silent and economical in operation. Maintenance free. Ideal for autonomous system water supply country house or cottage. A more advanced model "Vodomet" PROF 55-90 allows installation in wells up to 95 meters deep.

The downhole pump "Vodomet" PROF 40-50 has a capacity of 40 l / min, therefore it is used in wells with a small debit. Is one of the best options country house applications.

Submersible pump "Vodomet" 60-32 is an analogue of the considered model. After modernization, it is able to pump out water containing up to 2 kg of sand per 1 m³. As a result of using modern materials in rubbing parts and competent constructive solutions little wear. Able to lift water from a depth of 90 meters.

Other models of pumps "Vodomet" are structurally similar to those considered. They differ in technical characteristics - power, performance and others. Specific figures can be seen in the table and the “Pump Operating Instructions”. Detailed information must be given by the sales assistant when purchasing the unit.

Pump installation

The submersible pump for the well of the company "Dzhileks" is installed in the water supply system similarly to other downhole units. From the correct installation in the future will depend on the performance of the entire water supply system. Install the pump carefully, following all recommendations for its installation. The most unpleasant thing that can happen as a result of installation errors is drilling a new well and installing another pump.

To exclude the possibility of such a situation, it is necessary:

  1. Install pumping equipment.
  2. Install check valve.
  3. Make sure the pump is assembled correctly.
  4. Lower the pump into the well.
  5. Fasten the cable to the head.

Installation of pumping equipment. It is carried out on the surface. A cable is attached to the pump, a cable is unwound, a pipeline is connected.

Check valve. Protects the entire water supply system from water hammer. Attached either directly to the pump housing or in the pipeline.

Correct assembly. All connections are checked, the insulation of the twisted wires, the fastening of the clamps.

Lowering the pump into the well performed smoothly, without jerks. After lowering to a predetermined depth, the safety cable is securely fixed to the head.

For more information on preparing for the installation of the pump, see the video at the end of the article.

Note. Holding the pump during the descent is carried out only by the cable.

The downhole pump "Vodomet" is gaining more and more popularity in the consumer market. The high quality of the product, ease of installation and reliability in operation make it indispensable in the autonomous water supply of private houses. The multi-vector design allows the use of Dzhileks products not only in wells, but also in wells and open water bodies.

Don't forget to rate the article.

The Russian company "Dzhileks" produces equipment for the organization of water supply, heating and sewerage. Among the wide variety of products, a special place is occupied by pumps that pump water from underground wells, wells and open reservoirs. These products can be seen in large industrial and agricultural enterprises and in everyday life.

For example, a Dzhileks pump for a well will help organize the supply of drinking water to a private house or cottage. There is also equipment that will raise water from a deep well, and if necessary, you can use it to irrigate gardens.

The main feature of the equipment of a young and rapidly developing company is the use modern technologies, simplicity, quality and reliability. All pumps are fully adapted to the harsh conditions of the Russian climate and water composition.

Pumps have a lower cost compared to foreign analogues, many components and components are Gilex's own development. Along with this, high-tech parts supplied from other countries are widely used, which are distinguished by high-quality technical characteristics. The presence of reliable automation can protect devices from damage in emergency cases.


The range of products impresses with its breadth and areas of application:

  • pumps for drinking water;
  • sewerage;
  • pumping other types of liquids;
  • irrigation of crop areas.

Dzhileks pumps for pumping water from a well

These units are mainly used for open water sources with a large area - wells, individual reservoirs and natural reservoirs. It is in such places that it is easier to pump water and place additional equipment in the form along with the pump. The electric motors of these pumps are protected from water ingress and contain a so-called cooling jacket. In private houses and cottages, they are used quite often.

The principle of operation of the float switch is simple - if the water level falls below a certain mark, then the float drops and opens the contacts of the pump motor. This ensures the safety of the product in such a situation.

Similar products are marked as follows - Water cannon PROF 55/35 A, where the first digit 55 indicates the flow rate, measured in liters per minute, and the second digit indicates the pressure, which is also measured in liters. The letter "A" means automatic, that is, the use of a float switch. Depending on the design and diameter of the casing, the parameters of the pump may be different.

Advantages of pumps for wells:

  • high efficiency;
  • reliability and durability;
  • low prices - from 7 to 11 thousand rubles, depending on the capacity;
  • the ability to pump water with sufficiently large impurities and sand particles;
  • the use of materials that do not impair the quality of drinking water.

Well pumps

They are centrifugal type devices with so-called "floating" impellers. They are used in deep sources of drinking water, and can also be used in wells. The case diameter of these products is 98 millimeters, made of high quality stainless steel, the electric motor is in an oil cup, which ensures its cooling and stability of operating parameters.

These units are used in wells with a depth of no more than 30 meters. They are powerful and high performance. There are pumps for marginal underground sources, in which the amount of replenished water is small, and there are pumps for pumping large volumes of water.

Advantages borehole water cannons Gilex:

  1. High efficiency, and hence good technical characteristics.
  2. Using the principle of centrifugal force is more beneficial not only in terms of pump efficiency, but also saves the well itself. For example, vibration products, in addition to great noise, create soil vibrations, which can lead to the destruction of the well and its tightening with sand.
  3. Ability to pump water with a high content of foreign particles.
  4. Profitability.
  5. Reliability and durability due to double protection of the product - from high water pressure and sealing of the electric motor.
  6. Ease of maintenance and operation.
  7. Prices are also very democratic - from 7 to 17 thousand rubles.

Water supply system "Chastotnik"

Submersible type pumps Dzhileks "Chastotnik" are designed to create an autonomous water supply with constant water pressure, mainly for residential buildings and dachas. And this is achieved by using a filling tank (hydraulic accumulator) with a control unit.

In fact, the principle of operation of these units resembles pumping station, with the only difference that it is used on the surface, and the submersible pump is at depth. At the top there is only a hydraulic accumulator and a control unit that controls and controls the operation of the electric motor, a system for maintaining a given level of water pressure.

Many people ask why this system is called a chastotnik. It's simple - in the control unit there is a frequency converter, the functions of which are to provide soft start electric motor and maintaining the required water pressure.

The submersible household pump "Vodomet" of the Gileks brand has a number of undoubted advantages:

  1. Creation of uninterrupted water supply.
  2. Economy due to use storage tank and control unit.
  3. Durability and reliability.
  4. Low noise level unlike a conventional pumping station.
  5. Protection of the main parts and details from overloads in the electrical network.

Submersible pumps of the "Chastotnik" system can operate at a well depth of up to 30 meters. The letter "Ch" has been added to the product labeling. For example, the designation of a similar design is the Water Cannon PROF 115/95 H, here the first numbers indicate the water flow in liters per minute, and the second part indicates the magnitude of the water pressure in meters.

The cost of these products ranges from 29 to 39 thousand rubles.

How to choose a Gilex pump

When choosing pumps for pumping water, a homeowner should consider the following factors:

  1. Depth, diameter of the well.
  2. The quality characteristics of drinking water, in particular, it is worth paying attention to the content of impurities of silt and sand. If they are more than normal, then any device of this type may fail prematurely.
  3. The state of the electrical network, especially the frequency and magnitude of power surges.
  4. And, of course, the price. However, choosing a cheaper model does not always mean its durability and reliability.

Some tips before buying a Gilex pump:

  1. Many homeowners do not always delve into the depth of the issue - it seems to them that they bought the unit, installed it, and it should work properly for decades. However, the pump is a device that runs on electric current, the instability of its parameters may cause damage or deterioration of performance. Therefore, knowing domestic electrical networks, you should take care of purchasing a voltage stabilizer, which, among other things, will save all other appliances that consume electricity in the house.
  2. You should not buy the most powerful pump, as this is not always economically feasible. In addition, if water is not collected in the well so quickly, that is, its low productivity, then this will not lead to anything good. Such a unit will quickly pump out the contents of the well, and then it will run idle - there is a possibility of its failure.
  3. The composition of the water also affects the performance of the Gilex pump, like any other similar device. On the forums you can often see negative reviews about Gilex pumps, often all the comments boil down to the fact that it fails due to the high content of iron, lime and sand impurities. Even if you install an expensive imported pump famous brand, then it will also fail without taking into account and analyzing the water content in the well. And for some reason, some people are accustomed to speak negatively about domestic products. And often they are not worse than foreign goods.

Therefore, only taking into account all the norms and requirements for pumping equipment will help you choose the best product that will last for many years.