Pump for a well water cannon characteristics. Pumps Water jet

Borehole pump "Vodomet" of the company "Dzhileks" proved to be the most adapted to work in comparison with similar units foreign production. No wonder. Any mechanism is designed to work in certain conditions. The same is true with pumps. Domestic "Vodomet" is designed to work with our water, which differs from foreign in many ways.

The line of pumps "Dzhileks"

The production of submersible borehole pumps "Vodomet" is one of the main activities of the company. As a result of painstaking work, new models of pumping units have been created.

A variety of submersible pumps "Vodomet"

They have very significant differences from similar models from other manufacturers:

• high efficiency;
• increased durability of work;
• decreased sensitivity to dirty water;
• lack of vibration;
• the presence of a "washed" electric motor.

In addition to those listed, there are a number of differences that are characteristic only for Vodomet products. Some will be discussed a little later.

efficiency (coefficient useful action). For "Water cannons" it is higher than for similar models. The increase was achieved due to the absence of reciprocating motion and the installation of "floating" injection wheels.

The durability of the unit is increased due to the absence of valves and pistons, which are characterized by rapid abrasion during operation.

Sensitivity to dirty water is significantly reduced due to the presence of a mesh filter and a special arrangement of through channels that have the ability to self-clean.

The absence of vibration is achieved by the presence of several impellers. All of them are balanced when the pump is assembled.

The "washed" electric motor is absolutely protected from overheating.

Interesting to know. Produced models of pumps "Vodomet" are constantly being improved. Created new system seals, eliminating the violation of the sealing of the rotating units of the unit.

Design features

The submersible pump "Vodomet" has significant differences in comparison with its foreign analogues. First of all, it is necessary to pay attention to the installation of reinforced bearings on rotating parts. This ensures their trouble-free operation in conditions of high water pollution with sand particles or sedimentary solids.

Submersible pump "Vodomet", scheme

The next not unimportant feature is the optimization of flow channels and impellers. The result is the elimination of the possibility of clogging the pump as a whole. Additionally, the self-cleaning system contributes to this.

The electric motor of the unit is located on top. This arrangement made it possible to significantly reduce the diameter of the entire case, and bring the power cord out from above. Due to this, the size of the water well has also decreased. And this is already a tangible reduction in investments for its installation.

Another feature that is unique to the "Vodomet" is "floating" impellers. Without going into technical aspects, suffice it to say that such an innovation leads to an increase in pump performance and pressure, as well as to a decrease in the electricity consumed by it.

By the way, the electric motor of the unit during its operation is cooled by water passing through a specially made annular slot inside the housing. Overheating of the engine is not terrible, the unit can be operated without turning off for a long time.

Important. The pump is released Russian manufacturer and adapted to work with our water.

Model range of pumps

For small wells equipped for country houses or cottages, the design bureau of the company has developed a number of borehole pumps of the Dzhileks series.

Water cannon pump

They are compact and at the same time have the power to lift water from a depth of several tens of meters. Most units allow you to pump out water in automatic mode. If necessary, they can work without automation.

A wide range of water pumping units will satisfy the taste of any consumer. This is evidenced by the technical characteristics of submersible pumps, presented in the table:

Main characteristics

Models that do not have an automatic mode of operation do not require a special mode of operation. They easily withstand 20 inclusions per hour. In this case, the possibility of engine overheating is completely eliminated.

The next popular group of Dzhileks submersible pump models are models capable of operating in automatic mode. These units do not require human intervention at all. They turn on independently when the water pressure in the system drops, or in the case when the water level in the tank drops more than allowed. And vice versa, they turn off at the moment of reaching the set pressure or its increase above the norm. Their characteristics do not differ from those without automatic control, although the range of models is somewhat expanded.

The principle of operation in automatic mode is the current position of the float switch or the pressure in the chamber of the pumping station.

Popular Models

To fill containers and irrigate plantings, a pumping unit of the Vodomet PROF 55-35 model is quite enough. It can be used in open water bodies with a partial depth of 10-15 cm. It is not recommended for automatic water supply.

Borehole pump "Dzhileks" "Vodomet Prof" 55-50 is one of the most popular models of the company. It supplies water to a height of 50 meters. One of the advantages is the possibility of lowering it to a depth of up to 30 m. It is absolutely silent and economical in operation. Maintenance free. Ideal for autonomous system water supply country house or cottage. A more advanced model "Vodomet" PROF 55-90 allows installation in wells up to 95 meters deep.

The downhole pump "Vodomet" PROF 40-50 has a capacity of 40 l / min, therefore it is used in wells with a low debit. Is one of the best options country house applications.

Submersible pump "Vodomet" 60-32 is an analogue of the considered model. After modernization, it is able to pump out water containing up to 2 kg of sand per 1 m³. As a result of using modern materials in rubbing parts and competent constructive solutions little wear. Able to lift water from a depth of 90 meters.

Other models of pumps "Vodomet" are structurally similar to those considered. They differ in technical characteristics - power, performance and others. Specific figures can be seen in the table and the “Pump Operating Instructions”. Detailed information must be given by the sales assistant when purchasing the unit.

Pump installation

The submersible pump for the well of the company "Dzhileks" is installed in the water supply system similarly to other downhole units. From the correct installation in the future will depend on the performance of the entire water supply system. Install the pump carefully, following all recommendations for its installation. The most unpleasant thing that can happen as a result of installation errors is drilling a new well and installing another pump.

To exclude the possibility of such a situation, it is necessary:

1. Perform installation pumping equipment.
2. Install check valve.
3. Make sure the pump is assembled correctly.
4. Lower the pump into the well.
5. Fasten the cable to the head.

Installation of pumping equipment. It is carried out on the surface. A cable is attached to the pump, a cable is unwound, a pipeline is connected.

Check valve. Protects the entire water supply system from water hammer. Attached either directly to the pump housing or in the pipeline.

Correct assembly. All connections are checked, the insulation of the twisted wires, the fastening of the clamps.

Lowering the pump into the well performed smoothly, without jerks. After lowering to a predetermined depth, the safety cable is securely fixed to the head.

For more information on preparing for the installation of the pump, see the video at the end of the article.

Note. Holding the pump during the descent is carried out only by the rope.

The downhole pump "Vodomet" is gaining more and more popularity in the consumer market. The high quality of the product, ease of installation and reliability in operation make it indispensable in the autonomous water supply of private houses. The multi-vector design allows the use of Dzhileks products not only in wells, but also in wells and open water bodies.

Don't forget to rate the article.

Vodomet pumps are submersible multi-stage devices of the Russian company Dzhileks, designed to provide autonomous water supply to houses and watering plots.

Production is located in Klimovsk, Moscow region.

Equipment Features

The equipment of this brand is a range of household appliances of various sizes and different capacities, so you can choose a model that will provide the required amount of water.

Advantages of submersible pumps:

• work quietly;
• are small in size;
• do not "trouble up" water, unlike vibration ones;
• small size;
• low price;
• high efficiency;
• reviews of submersible pumps Vodomet are mostly positive - there are practically no negative ones, which is also a significant indicator;
• the ability to work in water with a significant amount of sand or clay (from 2 to 5 kg / m 3).

Water pumps Vodomet, designed specifically for Russian operating conditions, are of two types:

• wells;
• borehole (deep).

What are their differences?

Pumps for wells Dzhileks Vodomet are designed for use in relatively shallow wells (8-10 m), tanks or open water.

A prerequisite for the operation of such a pump is the sufficient width of the reservoir so that not only the pump, but also the float switch can fit there.

The water cannon pump for the well has obvious benefits before the well:

• greater efficiency, which means, all other things being equal, the submersible water jet pump for wells will have a greater performance than the water jet pump for a well;
• less sensitivity to dirty, "sandy" water;
• the presence of a simple float switch, thanks to which there is no need to install protection against "dry" operation;
• low price - from 9,000 to 13,000 rubles.

The submersible water pump for wells is smaller in size and is designed for extracting water from narrow (from 100 mm) and deep wells, lifting water from a considerable depth (usually the depth of wells is from 40 m).

The price of pumps for water jet wells is slightly higher than the price of well pumps - from 10,000 to 24,000 rubles.

About manufacturer's models

Submersible pumps Vodomet are available in several modifications, differing in power and other technical characteristics. Pumps for wells are marked as follows: pump Vodomet 55/35A, 55/50A, 55/75A, 150/30A, 150/45A, 150/60A.

Here, the letter "A" indicates that the pump is equipped with an automatic float switch.

Well pumps have the following designations: Water jet pump 40/50, 40/75, 60/32, 55/35, 55/50, 55/75, 55/90, 110/110, 115/115.

• The first number indicates the pump's maximum outlet flow (l/min). This flow rate is determined with open taps and no resistance to water movement.
• The second number is the maximum head (m), which develops the device with fully closed taps.

For example, the submersible pump Vodomet 60/32 delivers up to 60 liters of water per minute with a free spout, and when the water consumption taps are closed, it can create a pressure of up to 32 m. This unit costs almost 6800 rubles.

Based on the technical characteristics, we can say that:

• Water jet pumps with a maximum possible flow rate of 60 l/min will work most efficiently in water supply sources with a small flow rate (the amount of water that a source can give per unit time). In this case, the flow rate of the source must be no less than the performance of the pump, otherwise the pump may pump out all the water in the well (well), and begin to draw in silt or work “dry”, which can lead to its breakdown.In real conditions, a submersible pump Vodomet 60/52 at a price of about 8000 r can provide a consumption of 35-40 l / min (more than 2 m 3 / hour) - up to 4 consumer taps at the same time. Pump submersible water cannon 60/72 at the price of 10,000 r will give a stronger pressure at the same flow rate. Thanks to this, with the help of such a pump it is possible to move water over a greater distance.
• Pumps Vodomet with the highest flow rate of 115 l / min, provide for use in wells with medium and high flow rates, with a possible water flow rate of up to 65 l / min (about 4 m 3 / h). The submersible pump Vodomet 115/115 is one of the most powerful borehole pumps in the line. Its power is about 2200 kW, and the price is 16,000 rubles.
• Pumps Vodomet with a flow rate of up to 150 l / minute are necessary for the water supply of large houses. Such pumps can only be used in wells with a high flow rate, and their use is advisable at high water flow rates - more than 4 m 3 / h.

More accurate data for selection is easy to calculate on your own. The required pressure of the pump is the sum of the values ​​of the required pressure in the taps of consumers, possible pressure losses in pipelines and the height difference between the source and consumers.

Roughly, the maximum pump head can be determined by measuring the distance from ground level to water level in a reservoir:

• if the specified distance is less than 5 meters, then a pump with a head of up to 35 m is suitable. For example, a submersible pump Vodomet 55/35;
• if the distance is from 5 to 25 m, then a device with a declared head of 40 or 50 m is suitable. For example, a submersible pump Vodomet 60/52;
• if the distance is 25 - 45 m, you should choose a model with a head of 60 or 75 m. For example, a submersible pump Vodome 60/72;
• if the distance is from 45 to 60 m, it is better to choose a device with a pressure of 90-150 m. For example, a submersible pump Vodomet 115/115.

Device Reviews

Water pumps Vodomet are very popular with owners of private houses and summer cottages, therefore, various reviews have been accumulated about pumps for wells Vodomet.

Since the submersible pump for the water jet well is not deprived of attention and there are enough reviews about it - let's give a few for an example.

Maxim Viktorovich, 41 years old, Podolsk:

I have had a submersible water pump for the fifth year. Installed in a well at a depth of 25 meters. It works and works, the pressure is normal, only sometimes there is not enough water for everyone.

At first, I thought that my sandy well would "kill" the Vodomet well pump in a couple of years. I don’t know about others, but everything suits me. I'm thinking of looking at a more powerful model.

Maria and Alexander Semenov, Kursk:

Considered different variants for supplying water to the country house. We chose between Ukrainian Aquarius and Russian Gileks. Aquarius, they say, is very sensitive to sand, a remote condenser is also inconvenient. In general, we settled on submersible pump Water cannon 60/52.

It turned out that it gives 52 l / min only in ideal conditions, but in fact it comes out two times less. Nobody warned us about this. Would have known in advance — bought more powerful.

Mikhail Viktorovich, 61 years old, Ufa:

Reliable, good device. A submersible well pump Vodomet has been installed in the well for more than three years. It extracts water from eight meters and in a straight line about 35 meters more. Disadvantages - it is bad to connect through the RCD (often knocks out) and the cables are short.

About the device

The pump, completely immersed in water, works in very difficult conditions. Despite research, testing and the latest developments, these devices often fail. The causes of breakdowns are very diverse, but the main ones are:

• installation and operation of the pump in violation of the manufacturer's recommendations;
• voltage drops;
• dirty, sandy water;
• mechanical wear of parts of the mechanism - housing, blades.

In order for the Water Jet water pump to work properly for as long as possible, it must be installed correctly. So, when installing a pump in a well, it is necessary to mount it in a casing pipe with inside diameter not less than 100 mm.

The upper part of the pipe is closed with a cap to prevent foreign objects from entering the well.

To prevent freezing of the device in winter, a closing well is installed above the well, and the main pipe to the house is buried in the ground below the freezing level. The pump is installed so that it is lowered into the water, but not closer than 1.5 m to the bottom of the reservoir.

The schematic diagram of connecting the Water Jet pump is no different from the nuances of installing any other pump for a well - tied to a cable, it sinks to the bottom of the well. Attached to the cable with staples power cable and a hose through which water will flow.

After the device is at the bottom, the cable should be firmly fixed at the top.

A big plus is that do-it-yourself repair of the Water Cannon pump is quite possible. For a successful repair, you will definitely need spare parts to replace the damaged ones.

If "guilty" - circuit diagram water jet pump - the capacitor may have failed. If the water from the tap began to flow worse, the filter may be clogged or the hose is damaged (and the water simply flows back into the well).

The internal structure, the procedure for disassembling and repairing the Water Jet pumps are indicated in each instruction for the device.

However, it should be noted that it is not recommended to engage in such work on your own - despite the simplicity of the design, its disassembly and assembly (especially) requires some experience.

Equipment overview (video)

A downhole pump, by definition, cannot be cheap. When working in a filter well, it is regularly exposed to particles of sand and silt, and water has to be delivered from artesian structures to a sufficiently high height.

In search of a reliable device at an affordable price, owners of private plots most often choose a water pump manufactured by Dzhileks. In this material, we will consider in detail the device and the principle of operation of the equipment, we will talk about the features of its selection and use.

Pumps "Vodomet" have a fairly wide range of applications. With their help, you can pump water from wells of various depths, as well as from wells and open reservoirs.

They perfectly cope with the autonomous water supply of a private house, are used for watering the site, garden, etc. In this case, the diameter of the well should be 100 mm or more.

The case is made of high quality stainless steel. The top point of the pump is sealed in such a way that during its operation sand and other contaminants do not enter the casing from above.

The pump motor is enclosed in a sealed glass filled with oil. This design eliminates Negative influence external factors and protects the engine from damage.

The design and dimensions of the “Vodomet” pump allow it to be installed in wells with casing pipe diameter 100 mm or more

The device is oil-filled, asynchronous, the motor rotor is squirrel-cage, mounted on rolling bearings. The motor is partially protected from overheating by a thermal protector built into the stator winding. In addition, an additional cooling factor is water passing through a special annular gap left between the housing and the motor stator.

To balance the external and internal pressure of the engine, a special membrane is used. This allows the motor seal to be unloaded. As a result, the technical characteristics allow the use of the Vodomet pump at a depth of up to 30 meters. The top and bottom covers are arranged in such a way that all components of the device are in correct position about the central axis.

An important feature of the pump design is the presence of so-called “floating” impellers, which have the ability to run in. The efficiency of traditional pumping equipment largely depends on the size of the clearance that forms between its moving and static parts.

The larger such a gap, the more internal fluid leakage occurs inside the device, and the lower its efficiency. During the operation of the pump, the moving elements are gradually erased, which increases the clearance, and the efficiency becomes even lower. The design of the "floating" impellers of the "Vodomet" pump gives them the ability to move in the axial direction.

Deciphering the markings of various models

The marking of the pump in the form of letter indices reflects the design features of individual models:

• "BK"– the cable length of this model is 1 m.
• "A"(automatic) - the presence of a float switch that prevents the situation of "dry running".
• "PROF"– pumps for wells without an automatic shutdown system.
• "M"(main) - equipped with a fitting that allows you to use the pump on the surface, as an element of the water supply system.
• "HOUSE"- additionally equipped with components for the organization of automated water supply of a private house.
• "H"- Availability electronic system automatic pump control.

Devices marked with the index “A” can be installed in wells or other structures where there is sufficient free space for mounting a float switch.

The range of products manufactured by GILEX includes several models of borehole pumps with different technical specifications. This equipment is intended for use as part of domestic and industrial water supply systems with water intake from wells and boreholes. According to users, well pumps from JILEKS LLC are among the best on the Russian market.

Rules for choosing pumping equipment

The efficiency of an autonomous water supply system with forced water supply depends on the compliance of the technical characteristics of the pumping unit used with the conditions of water use. To do this, it is necessary to make a thorough analysis of all the nuances of the upcoming operation even before ordering the equipment. If you are faced with the question of which well pump is better to choose, consider the following criteria:

• well flow rate and volume of water consumption, the maximum number of inclusions per hour;
• temperature of the pumped liquid;
• parameters of the existing electrical network;
• water quality, presence and size of mechanical impurities;
• possible immersion depth for the submersible unit.

One of the most popular borehole pumps of the JILEKS company is the VODOMET centrifugal submersible unit. This equipment is available in several modifications, which allows you to choose a device with optimal technical characteristics for specific conditions of use. Each model is distinguished by high reliability, unpretentiousness, efficiency, and has a high efficiency. When choosing, use the online consultation of our company's specialists. Channels for communication are given in the "Contacts" section.

It is not enough to dig a well or a well. You should take care of how to supply water to the house, garden and other places. The water pump is designed for this purpose. The pump manufacturer is Dzhileks, a domestic leader in the manufacture of water pumps and related equipment.

Where can I use Gilex Water Cannon:
open waters,
wells,
wells,
various water tanks.

From the sources, water is supplied to the automatic water supply systems of the house, for watering the garden and garden, or for other purposes at the discretion.

Due to the layout features, the Gileks Water Meter pump can be placed at a depth of 100-150 mm from the water surface, and can also be used in a horizontal position. It is perfect for working in open and shallow sources.

How does a water pump work?

All Gilex models have a similar device principle. The stainless housing houses the pump part and the electric motor, which is washed by water. The rest of the parts are fixed with an intermediate support. The case is closed with covers on both sides.

The pump motor is filled with oil. The thermal relay is located outside the oil-filled cavity, which simplifies the repair of the part.

Depending on the model, the Waterjet pump may have different number repetitive steps. The parts of the device are divided into four components:
Cup.
The bottom of a glass.
Anti-friction washer.
Impeller.

The impellers rotate in the glass. And the cylinders are fixedly fixed between the cover and the plastic ring.

Device advantages

The manufacturer took care of human health. All parts of the Gileks water jet pump that come into contact with water are made of environmentally friendly and safe materials that do not affect water quality.

Some models of the Jilex Water Jet device have a removable filter. Its purpose is to protect the system from dirt, clay and sand. The filter extends the life of this equipment. If it gets dirty, you can clean it yourself. Also, the fence mesh has a large area. Water will fully flow even if the pump was lowered to the very bottom of the source.

The bottom cover has a conical shape. This design makes it easier to submerge the pump, it will not cling to possible casing connections.

The power cable can be pulled through the cover on top of the pump. Thanks to new design device it can be effectively used in wells with a small casing diameter.

The engine of the Gileks water jet pump is cooled thanks to the duct cold water between stator and housing.

Automation, which is built into the pump system, excludes its operation in idle mode. This function protects the engine from overheating, which prolongs its service life.

The thermal relay built into the pump motor determines the oil heating temperature and, if the norm is exceeded, stops the operation of the device.