Show the full list of iron door chips life. Which entrance door to choose for the apartment

27.06.2020

Previously, doors made of solid wood were popular, now steel entrance structures are increasingly being purchased. They have presentable appearance, they are hard to crack. Not one lock is inserted into the metal structure, but a set of bolts, which serves as additional protection against burglary. The most expensive models are armored. With the growth of crime, the demand for such products is also growing.

What kind of metal protection to choose? To do this, it is necessary to consider the types of input models, evaluate and compare their characteristics, look at the rating of manufacturers and their pricing policy. The requirements and preferences of the buyer should be taken into account.

quality requirements

When choosing an input sheet made of metal, it is advisable to familiarize yourself with its technical characteristics, namely:

The thickness of the metal and its execution. Durability and protective qualities depend on this parameter.
Locks. They protect the premises from the entry of strangers.
Hardware quality. It affects performance characteristics. Cheap accessories are short-lived: the product will soon cease to perform its functions.
Coating. The metal is subject to corrosion. High-quality metal will provide a durable attractive appearance of the product.

Doors "Forpost" from sheet metal

What to look for when buying

When buying, you should pay attention to such indicators of the input structure:

Raw material quality. If it is made of metal with a thickness of 1.5 mm or more, then blows with a sledgehammer will leave only dents. It all depends on the physical properties of the metal. Alloy steel can bend, but not break, but low-grade alloys, which have increased brittleness, can burst. The worse the brand of metal, the thicker it should be. Russian manufacturers use hard metal, but at the same time thick (up to 4 mm), so it is resistant to strong impact.

The sheet used to make the canvas must be solid. Welds impair product performance and increase the chance of burglary.

Insulation. Do not want the entrance to the house to be covered with ice from the inside in winter? Check with the seller which insulation is used. The best option is mineral wool or polystyrene foam.

Manufacturers, in order to reduce production costs, invest cheap insulation - corrugated cardboard. Such a model will not save either from the cold or from noise. It is impossible to determine the type of thermal insulation material in the store. Therefore, it remains to believe what the seller says. On the Internet, you can find the manufacturer's rating. Tap on the model you like. The outgoing hum indicates poor-quality insulation.

Locks. Few burglars take on a sledgehammer. So it’s easy to wake up the neighbors, and you can run into thick metal. Locks open more often. Therefore, it is important that they are of high quality. Usually two locks are built in: cylindrical and level.

When installing the lock, the number of crossbars (at least 4) and their thickness (from 20 mm) are taken into account. Such locks are considered reliable.

Reliable lock for home security

Loops. The main thing is that they should not come to the surface. The best option is hidden hinges and anti-burglary pins. The hinges have another purpose - to bear the weight of the structure. If the door leaf is light, then 2 hinges will suffice. If the weight exceeds 70 kg, then additional loops are needed (to hold and prevent sagging).

The more often the product is used, the sooner the hinges wear out. Ideally, if it is additionally equipped with ball bearings that improve the wear resistance of the model.

Exterior and interior decoration

The door leaf should be combined with the decoration of the room and please the buyer. When choosing, you should pay attention to the quality of the coating:

Hammer coating will not lose its original characteristics, even under the influence of weather conditions. Neither heat, nor moisture, nor direct rays of the sun will spoil the beauty of the canvas. Therefore, specimens that are not protected from the outside by an entrance, vestibule or canopy must have an external hammer coating.

Hammered door leaf

Transfer. If the product is installed inside the entrance, you can choose a bright transfer coating. The saturation of shades allows you to choose a metal model for every taste. Such a coating is not resistant to sunlight and wet weather.
Velvet transfer. No matter how beautiful the metal structure looks, many prefer to see it made of wood. A velvet transfer can combine the beauty of wood in metal. With the help of such a coating, it is possible to realistically imitate a wood canvas.
Teflon coated. If the door leaf will be used in harsh conditions, subjected to temperature changes, it is better to choose a Teflon coating. It will withstand moisture, sun and temperature.
Another type of coating is auto-enamel. Door models with such a coating look flawless and will last a long time.

Door coating with auto-enamel

The side of the door directed into the room is also different. Some manufacturers offer removable internal models. This allows you to easily carry out repairs in the room and quickly change the interior.

Famous Manufacturers

There are door manufacturing companies in every country. Domestic models are not inferior to foreign ones, since the quality does not depend on the price and country of manufacture, but on raw materials and equipment. The price in different countries varies due to the fact that each country has a different level of wealth.

Quality doors can be found in Russia, Belarus, China, Germany, Italy, Finland.

The cost of foreign products is formed from several factors: the price of the design itself, tax costs and transportation costs. Therefore, before ordering an Italian door, it is worth deciding whether its price matches the quality.

Manufacturers have a gradation of input metal sheets:

economy class: usually these are doors that are easy to open with a can opener. An integral plus is a small price, so people with below-average incomes buy them;
standard models. They are made of thick metal, they have a good coating, but unreliable locks and fittings;
business class and They are available to a few, they are mainly made to order, therefore, in their manufacture, individual wishes of customers are taken into account.

Let's review the input ceilings made of metal from various manufacturers. The following are popular:

Guardian;
Outpost;
Condor;
Torex;
Novak;
Galant.

Doors from the manufacturer "Toreks"

The last 2 stamps come from Poland. Ukrainian manufacturers do not lag behind either in quality or in price:

Doors OK;
Astor;
Terminus;
Doors of Ukraine;
Lakor;
Balkar - Dnieper;
Berislav.

Doors can be compared according to various parameters. The best metal entrance structures from top manufacturers have their own characteristics.

Outpost can be noted among the best manufacturers in Russia. This company produces metal sheets good quality. They are durable, strong, reliable. Dignity - hidden loops that become an obstacle for thieves (it will not be possible to cut silently). The design is diverse and attractive, easily fits into the interior of a modern room.

If a store offers to buy a Guardian door, you can be sure of its quality. The Russian manufacturer guarantees full compliance with technical standards. The main advantages of the Guardian:

the use of solid sheet metal with good mechanical properties (increased strength);
special protection against breaking the keyhole;
high-quality external coating (powder);
individual choice appearance blades and accessories, you can specify the desired type of locks, their number, individual size.

Catalog of metal products "Guardian"

Only poor-quality installation can spoil the product. The manufacturer has a poorly developed service system.

An acceptable price and high quality are offered by a manufacturer from Russia - Condor. The excellent thermal insulation properties of these models allow them to be used even in extremely cold areas. The coating of these specimens withstands high humidity, hard frost, direct sunlight.

Device doors "Condor"

For country house perfect fit metal models Torex. If there is no vestibule in the house, many door products cannot cope with thermal insulation. Toreks made sure that the locks did not freeze from the accumulated condensate, and equipped them with modern insulation - polystyrene foam.

The appearance of the models of the Polish manufacturer Galant is solid and flawless. The main advantage is that they are protected from breaking locks by special armored plates. Poles are made of stainless steel, which guarantees durability. Affordable price and quality that meets the standards attract buyers.

Polish door from the manufacturer "Galant"

Among the Polish manufacturers of entrance structures, the manufacturer Novak is noted. Its products are affordable and guarantee reliable protection from unauthorized persons. The design will satisfy the tastes of any buyer.

Ukrainian and Belarusian manufacturers produce reliable metal doors. Before you buy the model you like, find out the name, search for information about the manufacturer on the Internet and study the rating of the input floors, compare prices. Good copies can be purchased relatively inexpensively from domestic manufacturers.

Video: How to choose reliable metal doors.

In contact with

Comments

Anton 10/30/2017 21:18

Grade

Sergey Vitalievich 08.01.201811:35

Grade

New Articles

New comments

S.A.

Grade

Svetlana

Grade

Sergei

Grade

Sergei

No room can be imagined without a solid and beautiful door. And if we are talking about an apartment, then it must also be very durable, ensure the protection of property owners and the safety of their property. Marka.guru offers its rating of hardy and durable entrance doors from the best manufacturers and at affordable prices.

The best entrance doors are metal models that can withstand heavy loads.

Equally important is the presence of modern locks with unique secrets that are difficult to open with master keys.

To choose really good doors, you need to pay attention to the following points:

The foundation. No soft or thin metal, choose only high-strength steel, which additionally has good heat and sound insulation performance. These doors are very heavy. The cost of the product varies from the thickness of the steel; a sheet of 2-3 mm is considered the optimal thickness.
Finishing. Can be used as a design different materials– plastic, MDF, powder coating, varnish, paint, wood. They have aesthetic and functional features.
opening. It is necessary to decide where the handle should be, and in which direction the door will open. The direction can be inside, outside, left, right.
Fire and moisture resistance. Metal entrance doors are affected environment, which means that their coating must be resistant to any influences.
Noise and heat insulation. For this, light but effective fillers are used, which affect the final cost of the product.
Locking mechanism. Locks must be reliable and durable, there are 13 classes of burglary resistance.
accessories. Cheap products quickly fail and have an unaesthetic appearance. It is important to choose the right strong chains, loops, eyes and handles.
Quality. When choosing steel entrance door models, give preference to manufacturers who give a guarantee on their products, including fittings, platbands, canvases.
Service. To install the door, experts advise contacting experienced craftsmen.

There are plenty to choose from

Our rating of manufacturers will help you choose the best and solid door for your apartment or house. Manufacturers themselves are trying to offer quality models in different price categories. However, as practice shows, especially in large cities, this element of housing and security can never be saved. The best high-strength entrance doors must fully meet all the requirements of domestic realities.

1. ASD

The doors of this manufacturer can be purchased for an average of 17 thousand rubles. However, the price can vary greatly depending on the configuration, the materials and accessories used, the size of the product, and so on. The disadvantage of the door is that when ordering other, non-standard shades of panels, you will have to pay extra and wait for your order for another 2 to 4 weeks.

Model advantages:

concise style;
good value for money;
durable and lightweight;
provides reliable protection;
the ability to choose the color of the panels;
the thickness of the steel used is 1.5 mm, and the blade is 50 mm.

Used as base material durable metal, around the perimeter there is an armor plate. Additionally, there are two sealing circuits and a night valve.

Prices on Entrance metal door Economy Asd:

2. BRAVO

The average price of popular models of this manufacturer is 13,100 thousand rubles. For this money you get a solid door, with high-quality fittings. The whole system will last a very long time due to its advantages:

light door;
powerful loops;
high quality fittings;
use of high quality steel;
application of powder coating exterior finish.

Pretty good steel doors, but there are much better options.

If you live in a disadvantaged area, then a steel thickness of 1.5 mm will not be the best option.

And this is even if we take into account the fact that the canvas is produced by pressing without welding. The inside is filled with basalt slab.

Prices on Entrance door Yoshkar P-09 Wenge BRAVO:

3. ProfMaster

The Moscow company ProfMaster has been working in the production of entrance doors since 1998 and has managed to earn a good reputation, which is confirmed by numerous positive reviews from satisfied customers. Known mainly for the Nord series, made using thermal break technology, which provides exceptional thermal insulation: the doors are designed for outdoor use, do not sweat, do not freeze. However, among the entrance doors for the apartment there are also interesting models, as functional characteristics and visual features.

key competitive advantage- production of custom-made doors. The buyer receives:

scope in choosing the thickness of steel, locks, finishing materials;
the possibility of manufacturing a canvas of any non-standard size;
unique design project.

At the same time, prices remain quite affordable due to the absence of intermediaries. Production time varies from 3 days to 10 days depending on the complexity of the project. For those who do not want to wait, the manufacturer's website presents a selection of finished products.

Of the shortcomings, it should be noted that the company is more focused on the production of doors to order. If you need a specific door today, then this can be a problem, because it can only be made to order.

Prices on Doors ProfMaster:

4. Guardian

On average, you can buy Guardian doors made of steel for 21 thousand rubles. The models of this manufacturer have a lot of advantages, including from the technologies used. Depending on the configuration of each model, its price can vary significantly. The main advantages of the Guardian are the following:

reinforcement of the canvas;
use of high-strength clamps;
certificates of quality and conformity;
strong and stable system.

For many, the disadvantage will be the high price of manufacturers' products, however, it's worth it. You get a door that has the following characteristics:

made from two steel sheets cold rollers;
anti-removable clamps and trapezoidal stiffeners are installed;
mineral wool inside;
two locks and two seals.

Good sound insulation performance, doors meet the M1 reliability class.

Prices on Door metal Guardian series DS 2:

5. Elbor

Looking through the review of this model, I immediately want to note its strict and concise design, sometimes even reminiscent of old solutions. But in some cases, the main thing is not design, but quality and durability. Elbor is a fairly good solution, and you can buy a door for an average of 15 thousand rubles.

The advantages of products can be called:

use of thick steel;
high-quality finishing materials;
several opening options;
the presence of several locks;
peephole installed.

For many, the limited choice of design options and rather outdated color options will be a disappointment. But, you buy a door in which:

1.8 mm thick steel was used;
oak interior trim;
110 mm thick door frame filled with basalt slab.

In addition, the product has three sealing contours, an armor plate and three strong loops.

Prices for Doors Elbor:

6.TOREX

modern and futuristic design;
good choice of colors;
use of various patterns;
favorable prices;
use of imported equipment and components.

The models of this brand were included in our rating as the most controversial and controversial. The reviews left by the owners of the manufacturer's products are contradictory. Some say that there are enough problems with them, while others are completely satisfied with the acquisition. According to the company, only high-quality materials are used.

Other Features:

the thickness of steel sheets is 1.5-2 mm, and the blades are from 70 mm;
a wide choice of width and height of the product, there are double-leaf models;
for finishing uses MDF and PVC.

Prices for TOREX Doors:

7. Outpost

The company's products are inexpensive models that can be purchased for an average of 8-9 thousand rubles. Naturally, they require a separate strength test, because for such an amount it is doubtful to purchase a quality product. Although the manufacturer guarantees:

service maintenance;
installation with a guarantee;
a large selection of accessories;
own trading network.

The disadvantage of the product is that it is a budget option with all the consequences: poor burglar resistance and sound insulation.

But in the kit you get:

two castles;
standard sizes of products;
a large selection of colors;
modern design;
reliable locking systems;
seal contours;
some handles with a backlight system;
automatic locking.

Prices on steel door Soyuz-51 Outpost:

8. Neman

In the ranking of durable metal entrance doors, they are not in last place. And all this is due to the thoughtful work and equipment of the models, however, you have to pay for this, and on average it is more than 45 thousand rubles. For the money spent you get:

high rates of burglary resistance;
individuality and thoughtfulness of each model;
good reliability;
product durability;
the use of modern equipment for the production of doors;
high-precision and high-quality models;
manufacturer's warranty;
compliance with established standards.

Perhaps the only drawback of the products of the presented brand is the high price of the products. They are provided:

five protection classes;
minimum gaps;
high quality locks
anti-burglary systems;
multilayer high-strength panels;
overhead protective loops;
armor plates.

Prices on Entrance door Neman:

9. STEEL

Another option is not expensive models, which can be purchased on average for 10 thousand rubles. but is it worth it to buy such a door? The manufacturer claims that it is worth it, because despite the fact that these are budget models, it guarantees:

quality products;
hardy locks;
conservatism and conciseness;
a large selection of design and color options;
additional protection against burglary in the form of overlays and loop protection;
quality and durable parts.

Oddly enough, but the lack of brand products is the price. She directly says that high-quality products cannot be expected. The burglary and sound insulation indicators are not the best.

If speak about technical specifications, then it is worth noting the presence of all standard sizes, the thickness of the web is 50 mm, and the sheets of the web are 1.5 mm.

Prices on Entrance door STEEL:

10. Legrand

The doors of this manufacturer can be purchased for an average of 30 thousand rubles. The advantages of the brand's products are much greater than the disadvantages. Among the main advantages it is worth noting:

use of high-quality steel and fittings;
manufacturer's warranty for products provided;
long service life of all parts, systems and elements;
standard sizes;
the use of additional elements to increase security.

As with many other, rather expensive models, Legrand's main drawback is their price. However, it is worth exploring General characteristics products and you may decide that it is worth it.

sheet thickness - 1.5 mm, steel sheet - 50 mm;
the presence of additional armor plates;
two sealing circuits;
night valve;
laminated MDF, veneer;
locks of different security classes;
reinforcement of the lock and the lock part (4 and 3 mm, respectively).

Prices on Entrance doors Legrand:

The best modern metal doors cannot cost 10-15 thousand rubles. For the money, they can be beautiful and look like solid models, but they have weaknesses. If you are willing to pay an order of magnitude more, you can provide your home with much more security. If you want to install the best steel entrance doors to an apartment, then get ready for the fact that you will have to pay 50-70 thousand rubles. or more. But an armored door can fully protect you and your property.

Sections of the article:

Each buyer, in the process of choosing an input metal structure, strives to perfect combination reliability, safety and appearance of the product. However, quite often, various manufacturers still have shortcomings in one or another parameter. And in order to choose for yourself the best doors from all those on the market, you need to prioritize the requirements. In this case, picking up metal doors will be somewhat easier.

Manufacturer rating

Comparing many entrance door manufacturing companies, we can distinguish the four most popular, based on the number of customers and production volumes. Also, the products of these companies have the best ratio of prices and quality of the doors produced. This list includes:

"Outpost";
Torex;
"Elbor";
"Guardian".

Products of the company "Forpost" mainly occupy a niche of budget products. The range includes 7 lines of metal entrance doors. In addition, the company is engaged in the production of door fittings, steel visors and mailboxes. Metal structures from Forpost have a price range of 4,000 rubles and are the most affordable entrance doors on the market.

Metal doors manufactured by Torex have a huge range to meet almost any customer requirements. The price range is quite wide and includes designs from the middle class to elite metal doors. Torex also manufactures certified fireproof entrance doors.

The production company "Elbor" was formed on the basis of several former enterprises of the military-industrial complex. The range of manufactured products is quite wide and includes not only metal entrance doors. The company is engaged in the production of metal molds, as well as self-developed locking mechanisms with an increased level of security. Among the presented companies, Elbor is the flagship in terms of the production of burglar-resistant door structures.

The company "Guardian" among the presented companies in terms of pricing policy occupies a niche of a manufacturer producing premium class metal doors. A significant plus is the implementation of full service support for the buyer. Doors of the company "Guardian" can be safely called the most beautiful and one of the most reliable on the market. In addition to entrance doors, the company is engaged in the production decorative elements, lock mechanisms and fittings.

Best Budget Doors

Based on the price-quality ratio, the best option is the door of the Forpost company, model 128 C. The door leaf on the outside has a layer of anti-vandal powder coating. The inner side of the door is equipped with a polymer coating with imitation wood. The door has in its arsenal a rather pleasant and useful addition in the form of key illumination.

The company itself has been producing entrance door structures since 1998. The development of door structures, locking mechanisms and design of all of the above is carried out directly by the company's specialists. Initially, the manufacture of all metal structures was carried out at the production facilities of the Kaliningrad plant "Masterlok". However, since 2009, the entire product line has been produced in China. In parallel with this, the system of quality control of manufactured products is being significantly improved at the plant itself.

According to statistics, 500,000 company doors are installed every year. Such popularity is due to the availability of products for all segments of the population. Based on this, fake products of the Forpost company are often found on sale. In order to avoid trouble during the purchase process, it is important to pay attention to several nuances.

The locks installed in the Forpost doors are produced exclusively by the Masterlok plant. The original door always has a certificate of authenticity and compliance with the declared characteristics. The official dealer must have a certification document certifying the right to sell and carry out installation work for these doors.

The advantages of metal doors of the Forpost company include:

Availability of prices;
Pleasant design appearance;
Wide range of products;
Convenient function of closing the door leaf without using a key;
Keyhole illumination;
Internal polymer coating, providing ease of care for the canvas and high resistance to various climatic conditions;
Equipped with locking mechanisms of the 4th class of protection against burglaries;
The presence of multi-circuit seals that allow you to qualitatively protect the housing from the penetration of drafts and foreign odors;
Widely developed network of service centers.

However, as in any other product, Forpost metal entrance doors have their drawbacks. These products are characterized by an insufficient level of sound insulation. The most common design defect is a noticeable handle play. If it is necessary to replace the fittings, in most cases, suitable mechanisms can only be found at the manufacturer.

The most secure doors

The Ultimatum design by Torex is rightfully considered the safest door. Such a metal entrance door is strong enough due to the use of high-quality solid sheet steel. In addition, it is equipped with a new generation of locking mechanisms with an improved lock.

The production of doors by Torex dates back to 1989. During this time, the company managed to win a significant market share due to the high reliability of its products. The plant has several large warehouse complexes located in different cities of the CIS.

If you need to choose which metal door is better for placement in the emergency exit zone, the most suitable door than Torex cannot be found. The fire-resistant equipment of the doors and the technology of their production makes it possible to contain the spread of the flame from 15 to 360 minutes. Thus, sufficient time is provided for the implementation of the main evacuation measures.

Locks mounted in Torex doors are quite effective in resisting temperature changes and do not fail even in extreme cold. In addition, the input metal structures of this company have a number of advantages:

They have a high degree of sound insulation;
Beautiful appearance of the doors;
High-quality breathability, exceeding standard indicators by 20%;
Effective protection against drafts and the penetration of foreign odors into the house.

The disadvantages of the products include a rather high price for additional services for installation and finishing work. Finding suitable fittings, if replacement is necessary, also causes significant difficulties.

The best anti-burglary systems

Elbor Lux door structures have the highest degree of protection against burglaries.

The door leaf is equipped with two locking systems, each of which can be locked for 4 turns. The door has additional protection against knocking out locks and special pins that prevent the removal of the door leaf.

Among the presented companies, Elbor is the oldest manufacturer of input metal structures. The history of the holding, founded on the basis of the former enterprises of the military-industrial complex, dates back to 1976. And already at least this fact is an indisputable proof of the reliability and quality of the products.

Currently, the plant has its own production facilities. Quality control of products is carried out using high-precision Japanese technologies. The company's product line contains both economy class products and elite metal doors.

The advantages of Elbor products can be confidently attributed to such indicators as:

The presence of models of classical design and external representativeness of products;
A wide range of materials and methods of finishing both external and internal finishing of the canvas;
Ease of opening and closing, despite the severity of the design;
The presence of locks of a high level of burglary resistance;
Large margin of safety;
Highly effective thermal and sound insulation;
Internal filling with environmentally friendly mineral wool;
The presence of additional metal elements that provide increased rigidity of the door leaf;
The use of anti-removable pins, which at times increase the reliability of the design.

The disadvantages of the manufacturer of metal entrance doors include a fairly high price for manufactured products. It is also not uncommon for customers to complain about the work of service centers and dealer branches on service issues.

The most beautiful and reliable doors

In order to understand which metal doors are better in terms of reliability and aesthetics, it is enough to pay attention to the Guardian DS-2 model of the Guardian manufacturer. The door leaf is made of a single sheet of metal and is complemented by three stiffening ribs. Inside the door structure there is a layer of mineral wool, which provides quite effective noise and thermal insulation of the room. The canvas is equipped with additional fixing elements in the form of 3 anti-removable pins.

The choice of external design of the door is almost unlimited. Both internal and external finishing of the leaf can be decorated with anti-vandal powder coating, glossy laminated MDF panel (with the possibility of choosing a suitable color solution), or using a natural array.

The plant of the company "Guardian" is one of the first manufacturers of doors, opened in Russia in the 90s. Only high quality steel is used in the manufacturing process. The products of this manufacturer have repeatedly won the highest awards in the form of quality marks at international exhibitions.

The advantages of the entrance structures of the Guardian plant are:

Presentable appearance;
A wide range of products and related products;
The presence of structures of varying degrees of security, including the possibility of equipping the front door with an armored package and the latest technological protection elements;
Increased blade durability due to trapezoidal stiffeners;
The presence of minimal gaps between the door frame and the leaf, which is achieved thanks to high-precision production machines;
A double-circuit seal that effectively provides protection against drafts and the penetration of foreign odors.

The only significant disadvantage of the products of the company "Guardian" is an underdeveloped service system. There are frequent complaints from customers about poor-quality installation of doors.

In the process of choosing an entrance door for their home, many buyers first of all pay attention to the appearance, functionality and reliability of the product. But besides this, at the time of the final decision in favor of a particular design from the range on the market, the manufacturer of the entrance doors is also taken into account.

Leading manufacturing companies in Russia

Trust in top companies is not accidental, since each of them not only guarantees quality, but also values its reputation, which means it releases reliable entrance doors. So, for a long time, the leading positions of the Russian market among the factories of entrance door structures are deservedly occupied by the following companies:

The door, nicknamed the Beast;
Enterprise Steel;
Squirrel;
Gerda;
Masterlock;
Optima;
Torex.

Each of these companies producing entrance doors has its own well-established and modernized production for individual working methods. And due to the fact that Russia is rich in high quality raw materials, companies are easily able to compete with the giants of the international market.

Door called the Beast

The original and somewhat defiant name of the company allows you to immediately pay close attention to it. The manufacturers themselves present themselves as the most responsible players in the metal entrance door market thanks to an established and almost complete work cycle. The company is engaged not only in the development of new concepts for the manufacture of doors and the production itself, but also has an established sales system.

The company has many consulting and service centers not only in the region of production, but throughout the country. This ensures timely delivery, high-quality installation of products by the company's specialists, as well as attentive warranty and post-warranty service for products.

Thanks to highly qualified personnel and openness to innovation, the manufacturing company easily and quickly implements the latest developments of engineers and designers in its products. And the use of stage-by-stage control of the production process provides the ability to detect deviations in indicators in manufactured products. Thanks to this, only high-quality entrance doors go on sale.

Enterprise Steel

For more than 24 years, the Stahl enterprise has occupied a leading position in the popularity of metal doors. These manufacturers of entrance doors, due to the quality of their products, have repeatedly become honorary participants in major construction exhibitions and forums in Russia.

A significant advantage in the work of the company is the production of not only door panels, but also reliable locking systems. electronic type. And thanks to the close cooperation of the company with such well-known international brands as "Mottura", "Cisa", "Evva", "Agnelli Porte" and "Legnoform", entrance doors are always equipped with reliable and high-quality fittings.

Stal's products are present not only in the domestic Russian market, but also confidently introduces metal entrance doors of its own production to the international sales arena.

Squirrel

The company began its existence in 1995 and since then has been steadily expanding its production. Thanks to perseverance and an original approach to the wishes of customers, during the first 3 years of work, the company switched from the production of simple iron sheets to multi-layer door structures with the possibility of covering products with a decorative layer of MDF.

Each produced door is necessarily equipped with a special layer of insulation. This allows you to use the doors without problems even in the coldest regions of the country.

Among the products produced by Russian manufacturers of entrance doors, Belka has earned high popularity due to the manufacture of products with a high degree of anti-burglary protection. In addition, the plant produces reinforced bulletproof door structures.

Gerda

The company-manufacturer of metal input systems has been present in the domestic market of the country for more than 20 years. During this period of work, the plant has acquired many high-class partners in the face of such well-known companies:

German MaMe Türendesign GmbH;
Israeli Open Gallery;
Austrian Wippro Türen- und Treppenwerk GmbH.

Thanks to close cooperation with high-class specialists, Gerda metal entrance doors contain a lot of original and useful innovations. So, the basic principle of the installation of these Russian-made products is to fasten directly to the walls of the bearing type. This significantly increases the reliability of the structure through the use of particularly strong fastening systems.

In addition to the manufacture of doors, Gerda produces unique locks with an increased anti-burglary protection system. The efficiency of the product is ensured by the presence of more than 4 billion combinations of locks.

The main specialization of the company is the production of original input structures to order. The professionalism and quality are evidenced by the fact that the metal doors of the manufacturer Gerda are installed at the country's strategic military facilities.

Masterlock

The Masterlok company produces more than 80,000 metal entrance doors per year. Products manufactured on our own lines are sold under the Forpost trademark. Distribution regions - Russia and the CIS.

A high degree of environmental friendliness of products can be safely attributed to the bright advantages of the plant's products. In addition, the Masterlok company individually manufactures products with increased burglary resistance. Such canvases are made of sheet steel with a thickness of 2.2 mm.

A team of designers and designers always carefully works on the creation of products. Therefore, Masterlock products are not only resistant to all kinds of loads, but also very attractive from an aesthetic point of view.

Thanks to a wide range of products and a flexible pricing policy, the manufacturer of metal entrance doors Guardian has a high degree of popularity among Russian residents. Given the significant experience in the manufacture and maintenance of doors, the company systematically modernizes the principles of production of products.

Thanks to strict quality control of products even at the stages of production, the manufacturer confidently gives a five-year guarantee for each of its products.

Optima

The Optima company, which produces metal entrance doors, unlike most Russian manufacturers, does not produce products of standard sizes. The company specializes in the manufacture of products exclusively for individual sizes. Even in the case of working with wholesale clients, each unit of production is carried out strictly according to the presented standards. The shape of the canvas of the future door depends only on the wishes of the customer and can be either in the form of a regular rectangle or a rounded arched type.

In addition, the doors are equipped with individually selected fittings. Any door manufactured by Optima can be equipped with a locking system from a simple bolt block to a complex electronic design with fingerprint sensors.

Torex

The company has been a leader in the market of entrance metal structures for over 20 years. During this time, the production was repeatedly subjected to partial and complete modernization. Currently, Torex has one of the most modern production facilities. At the same time, the reliability of the manufactured products is confirmed by certificates of quality and compliance with GOST requirements.

Constant tests of manufactured products in independent laboratories and control of all stages of production allow the company to give at least a five-year warranty on its own products with full confidence.

All entrance structures that are produced at the Torex factory have elevated level sound absorption and thermal insulation. Therefore, the company's products can be installed with confidence in any climatic conditions.

Explaining the functionality of the front door is rather stupid - this is a thing that no one can do without. private house or an apartment perhaps the most important attribute of the security of personal housing. Of course, the degree of reliability of such doors is highly dependent on the price segment. The cheapest models can only boast of a pleasant appearance - the protection functions here will be performed purely nominally.

In the case of more expensive doors, developers bother both with design and reliability parameters, supplementing the design with stiffeners, and also using sheets of two millimeters or more as a basis.

The market segment of entrance doors is very extensive, and includes a huge number of manufacturing companies. We decided to focus only on some of the best time-tested companies. Your attention is presented to the top 10 best manufacturers of entrance doors in two main categories. The final list was formed based on the following criteria:

customer reviews about the experience of use;
professional opinion;
the breadth of the model range;
company's reputation.

The best manufacturers of entrance doors in the budget price segment

5 Outpost

The best price for products
The country: Russia (produced in China)
Rating (2019): 4.6

The company enjoyed great popularity until 2009. She began her thorny path not so long ago - production was launched in 1998. For 11 years, Forpost fought hard for profit, but in the already mentioned 2009, the management realized that it was possible to reduce the cost of the door manufacturing process only by moving production to China. From that moment on, things went uphill - the products began to "stamp" 500 thousand copies a year.

In general, users are satisfied with the Chinese origin of the doors, but cases of break-ins or unexpected breakdowns overtake some at the most inopportune moments. This is explained very simply - from the moment the company moved to China, fake copies under the Forpost trademark began to enter the market.

Advantages:

low cost even for elite doors;
good concentration of service centers throughout the country, proper service;
a good choice - a wide range of entrance doors.

Disadvantages:

fittings are suitable and supplied only from the factory;
brings sound insulation in individual models;
presence on the market of low-quality fakes.

4 Groff

Premium quality at an average price
Country Russia
Rating (2019): 4.8

Groff is one of the official trademarks of the manufacturer Bravo, specializing in the sale of metal entrance doors. Strikingly different from classic products management company the use of extremely thick steel, a reinforced structure with additional stiffeners, refractory mineral wool manufactured by Knauf, as well as complete fittings (handles, locks, hinges, canopies, etc.).

Aesthetics of Groff doors is observed to match the high nominal quality, and is laid down on early stages design thanks to the work of full-time designers. Ultimately, consumers receive ready-made solutions for installation in apartments and private houses, the guarantee of a long service life of which is confirmed by a ten-year mandatory maintenance period from the manufacturers themselves. Of course, one of the most worthy candidates for a place in the ranking, both according to user reviews and according to experts.

3 Bravo

Availability in the range of products for various market segments
Country Russia
Rating (2019): 4.8

The indispensable leader of the domestic segment of entrance doors of recent times, the model range of which includes over 350 units of the original product. In this catalog, doors created according to modern technology 3D-Graf finishes, the cost of which is significantly higher than the market average.

However, there is an alternative option, the cheapness of which is due to the use of veneer. From the point of view of execution, the entrance doors of the manufacturer Bravo do not differ in abundance, but this is fully compensated by reliability and quality. The products of this company are successfully sold under other trademarks, such as Bravo Lux and BelDver, bringing the owner a good profit. Regarding user reviews, we can conclude the following: a number of models of the budget segment of the company have mediocre sound insulation, but all of them, without exception, provide reliable protection against drafts, which is due to the use of good seals and insulating material with pronounced thermal functions.

2 Neman

The best combination of price and quality
Country Russia
Rating (2019): 4.8

A company that knows a lot about true security. Wide model range and a very good price for their products. It cares not only (and not so much) about safety, but about the appearance of the doors - their product obviously does not occupy entertainment.

In terms of reliability, everything is fine - the doors are made of thick alloy steel sheets and all, without exception, are equipped with a double lock. But the number of locking elements can be increased at the request of the user. It is also striking that the buyer can choose fittings from other manufacturers - Neman's sense of pride is far from off scale (unlike some competitors).

Advantages:

availability of quality certificates for all major safety parameters;
acceptable cost of product lines;
abundance of design solutions.

Disadvantages:

not detected.

1 Steel

The choice of users and professionals
Country Russia
Rating (2019): 4.9

Purely technically, the Stal company is like the premium manufacturer Elbor - their doors also have progressive burglary protection and good reliability characteristics in general. However, the main difference lies in the price category: if Elbor is focused on the production of doors for all three price segments, then there are no very expensive models in the arsenal of Stal. But there is a well-deserved love of users who, as one, speak positively about the company's products.

Professionals do not lag behind happy consumers, noting that although the company has some "punctures" in the form of unsuccessful models for apartments and private houses, it is still an exemplary mid-level manufacturer.

Advantages:

a variety of options for exterior door trim;
compliance with all preferences and wishes of the buyer;
good service;
a wide range of goods.

Disadvantages:

some models do not differ in branded quality.

The best manufacturers of entrance doors in the middle price segment

5 Fortus

Huge selection of entrance doors on the "do it yourself" model. Over a thousand different style combinations
Country: Germany
Rating (2019): 4.7

The German giant in the production of entrance doors has one interesting trend that is different from the vast majority of direct competitors. Instead of selling ready-made solutions they accept orders for the manufacture of an individual product, assembled according to all the canons of designers beloved since childhood. Thus, a wide range of choices is available to consumers in terms of the number of door leaves, the complexity of locks, their degree of burglary resistance, the color and material of the door leaf (metal, wood, combined) and the shape of the fittings, as well as the type of finish.

Through simple mathematical operations, we found out that there are over a thousand options for combining the parameters of Fortus entrance doors. Therefore, any user will be able to find a door for both an apartment and a private house. According to numerous reviews, the products of this company have a high degree of reliability, do not suffer from problems with sound insulation and heat preservation inside the premises.

4 Dierre

Great product design. Rapidly evolving portfolio with a focus on cutting-edge developments
Country: Italy
Rating (2019): 4.8

Dierre is an Italian firm for the production of reliable entrance doors, which is in the elite of the segment and does not need excessive formal introductions. Her main feature- full reliance on advanced developments, implemented at any convenient opportunity in the design of products. So, recent trends have led to the creation of "smart" doors, with the function of locking and unlocking the lock using the remote control remote control(as an example, the Elettra range).

The second important quality of doors from Dierre is the observance of a special style, sustained within the framework of moderate chic and delicacy. Any design of the door leaf is accompanied by the selection of unique fittings, which gives the product a touch of exclusivity and exclusivity (At-3 model). Yes, the cost is very high, but the quality, appearance and reliability fully compensates for this shortcoming.

3 Guardian

Aesthetic appearance
Country Russia
Rating (2019): 4.8

Russian plant for the manufacture of metal doors, which began its work in 1994. Deservedly deserves the title of the best manufacturer beautiful doors. Precisely beautiful, because the aesthetics of performance very often interests users in the first place. Regarding the reliability of products, everything is also good - the door collections have a number of domestic and international quality certificates in the field of fire safety, sound insulation, protection against burglary and operational durability.

But among the minuses, not the most efficient service can be distinguished: according to consumer reviews, malfunctions that have arisen during use (even if minor ones) are eliminated over a long period of time.

Advantages:

door fit and door frame on the highest level(gaps are minimal);
a wide range of products in all price segments;
conformity of products to high quality standards;
the main filling material is a cotton-mineral plate.

Disadvantages:

not the fastest service.

2 TOREX

Optimal balance of security options
Country Russia
Rating (2019): 4.9

The enterprise, whose head office and assembly shop are located in the city of Saratov. Production facilities were launched in 1989 - almost before the collapse of the Soviet Union. However, in just a few years, the company has gained great popularity not only in the countries of the USSR, but also abroad. At the moment, TOREX has eight warehouses on the territory of the CIS countries, from which, in fact, the main trade with the world takes place.

From the positive features of the company, one can note a good service, a huge variety of model lines and the highest quality of each individual product. Of course, all this has one drawback, and it obviously lies in the high cost. But quality, as well as the peace of mind that comes with it, comes at a cost.

Advantages:

excellent heat resistance (from 15 minutes to 5-6 hours);
compliance with all key safety standards;
an extensive range of goods;
in most cases - an attractive design.

Disadvantages:

high price and expensive service.

1 Elbor

High degree of protection against hacking
Country Russia
Rating (2019): 4.9

You can hear a lot of flattering reviews about the doors of the Elbor company and, it should be noted, very deservedly so. The plant began to function back in 1976, but it specialized far from the production of doors - in those days, all enterprises worked for the benefit of the defense power of the Land of Soviets. It is impossible to come up with a better start - to re-qualify the "defense industry" of the country for the production of an almost defensive element of personal space. It is this fact that determined the high quality of metal entrance doors, the main merit of which is almost complete immunity to breaking. However, in other aspects, the models from Elbor show themselves on the good side. The only drawback is the high cost of products, in fact, excluding the presence of doors of the lower price segment.

Advantages:

original design aimed at increasing the protection of doors from breaking;
the main type of filler is mineral wool;
use of refractory coatings;
excellent appearance in all five model series.

Disadvantages:

high cost of production.

How to choose a reliable front door

Choosing a good front door is a matter of responsibility and personal conscience of each user. Of course, you can resort to the proven method “the more expensive the better”, however, if finances do not allow you to purchase a premium product, we recommend that you pay attention to the following characteristics for choosing an entrance door yourself:

Base number of locks. If you have no desire to make an individual order, and you have to choose from a limited number of models, give preference to doors with several installed locks. It is desirable that they represent fundamentally different mechanisms - if one of the locks is opened, there are guarantees that the second one will create a problem for the conditional cracker.

Availability of additional locking elements. The optional inclusion of locks such as an ordinary latch (or, at worst, a simple chain) will be a nice addition and a bonus to protecting the door when trying to break in.

Door hinge type. Recently, hidden hinges have been especially popular, cut under a decent layer of metal for all the same security needs from hacking. However, the installation of such elements increases the overall cost of the structure and the work carried out. Therefore, if the budget is limited, hidden loops can be neglected (or save on other options).

Type of exterior finish. A parameter that is responsible not so much for safety as for the neat appearance of the front door. Finishing with fabric and wood is acceptable for private houses, when security is guaranteed already at the stage of entering the yard. For apartments, preference should be given to metal doors powder coated for extra strength.

insulating material. The presence of an insulating filler determines the throughput of the door leaf to noise and cold / hot air. The most optimal material is mineral wool, which almost completely absorbs external noise and ensures the preservation of heat inside the corridor. Cheap doors have no filler at all.