How to glue vinyl wallpaper. How to glue vinyl wallpaper - detailed instructions! Video: master class on pasting walls with vinyl wallpaper

Vinyl wallpaper is one of the most popular types of wall and ceiling finishes. They have become an excellent alternative to more expensive materials. In this article, we will analyze all the subtleties of gluing such a canvas, which will help you make repairs with your own hands quickly and efficiently.

Main characteristics

Vinyl wallpapers come in paper and non-woven base. They are made of polyvinyl, which provides a high density. Thanks to this, it becomes possible to hide irregularities.

When choosing for gluing vinyl wallpaper, it is recommended to pay attention to the icons indicated on the rolls. This type has different characteristics, and when buying this is also worth considering. First, the technology of applying glue is different. There are types where the adhesive must be applied to walls or wallpaper, as well as the type where it was applied during production. In the latter case, it will be faster and easier to glue, and it will not take much time and effort. Secondly, it is worth considering for which premises they are selected in terms of humidity. There are such categories:

Surface preparation

If the wall has old finish, then before pasting new material, the old one should be disposed of. To do this, you need to wet it. warm water and then, using a spatula, remove. If the surface has been painted, you will need a damp sponge and use it to remove the paint. These processes are not too complicated, the main thing is to do everything carefully.

The next step is to inspect the surface for irregularities. If any, they should be repaired with putty or plaster mortar. The final step will be processing with a primer and leveling with putty. For vinyl wallpaper, the wall is puttied only once, and then processed sandpaper to make the surface look as even as possible. After that, the wall must be primed.

Nowadays, you can find a huge number of different primers. A special adhesive has been developed for vinyl wallpaper. You can also use the usual, which will need to be diluted with water first.

After all the work has been done, you will need to draw a vertical line on the wall, which will help to stick it evenly vinyl wallpapers. To draw a line, use a plumb line, pencil and ruler. A plumb line is installed under the ceiling near the corner and a straight vertical line is drawn.

Since vinyl is a fairly dense material that can hide the unevenness of the wall, it is not necessary to apply another putty layer before gluing it, which will save a lot of money. If a question arises when preparing the surface with your own hands, in order to properly glue vinyl wallpaper, we recommend that you watch the following video:

Wallpapering

The technology of gluing vinyl wallpaper is practically the same as other types. Since vinyl wallpaper is quite wide, the number of joints will be minimal. First of all, using a sharp blade or a construction knife, they need to be cut into strips. The length of the strips should be equal to the height of the wall with the addition of 7 centimeters. Extra centimeters will help hide minor surface irregularities.

The next step to hang vinyl wallpaper is to apply glue. The roller will help us with this. It is necessary to lubricate the section of the wall where the wallpaper strip will be pasted. The cut material is glued from the top of the wall exactly along the line and gradually falls down. To reach the ceiling, it is better to use a ladder or a table. The wallpaper is aligned vertically, and then with the help of a roller, air bubbles that remain after gluing are squeezed out. This process is very important, since it is he who guarantees the quality of the work done, so it is recommended to take it very carefully.

Usually vinyl wallpapers are glued end-to-end, but some masters use overlapping technology. The overlap usually has a size of several centimeters and after applying the second sheet, a cut is made along the line of intersection. This technology also has the right to life.

If the glue needs to be applied to the wallpaper itself, then you will need to spread the material on the floor and coat it with an even layer. It is not recommended to use a lot of substance, as the wallpaper can soften and lose its properties. The canvas should be well saturated, so you need to let it lie down for 5-10 minutes. If the glue gets on the front of the wallpaper, you need to quickly and carefully remove it with a dry cloth so that it does not have time to dry.

Sticking vinyl wallpaper with your own hands is not as difficult as it seems, but if you have problems, it is better to watch the training video:

Non-woven wallpaper gluing

The rules for gluing non-woven vinyl wallpaper are practically the same as those described above, but there are still some nuances. Glue needs to be applied only to the wall, the material itself does not need to be processed. In the corners they are glued with an overlap, with an allowance of 5 centimeters. After gluing, the excess part of the canvas is cut off. The rest of the process is no different from paper-based vinyl wallpaper. If you encounter difficulties, we advise you to watch a special video that will help you understand in more detail the process of gluing non-woven vinyl wallpaper with your own hands:

Consider some points that you need to consider when working with vinyl wallpaper:

Results

As you can see, sticking vinyl wallpaper with your own hands is not so difficult. The main thing is to follow all the rules and instructions written in the article, and you guarantee yourself quality repair without much investment. After all, you do not need to spend money on a construction team, which will provide significant savings. Vinyl wallpaper is a great choice for almost any room. They are strong enough to withstand washing with water, so that in case of stains, they can be easily removed.

We will send the material to you by e-mail

Wallpapering is an important part of any renovation. This process is laborious and complex. Many people are interested: how to glue paper-based vinyl wallpaper. At the same time, it is important to choose a high-quality glue, since when using a low-quality composition, everything will need to be finished again. Features of gluing depend on the selected material. Vinyl panels are popular, which are characterized by reliability, wear resistance and UV resistance. Before you purchase the material, you should find out the features of working with this material.

Finishing with canvases vinyl backing provides an opportunity to apply unusual design techniques in the interior

Gluing consists of the following steps:

• walls are being prepared;

• a primer is applied, with the help of which shortcomings are repaired and miniature irregularities are hidden;

• glue is diluted in the container. You should get a solution without lumps and clots;

• using a level, a line is drawn for gluing the first sheet;

• electricity should be turned off in the room, and all switches and sockets should be removed from the walls;
• each roll is cut into strips;
• an adhesive composition is applied to the workpiece, while it is impossible to leave dry places;

• a solution is also applied to the surface of the wall;
• sheets are glued end-to-end, without allowance;

• excess glue is removed with foam rubber or a soft cloth;

• the edges are trimmed with a clerical knife.

Useful information! There should be no drafts in the room. The fabrics will dry for two days.

Related article:

Secrets of the correct gluing of the ceiling

The ceiling surface must be glued before pasting the walls. In this case, it is worth choosing lighter materials.When processing the ceiling, it is worth taking out all objects and carpets. If items cannot be taken out, they are covered with plastic wrap.

Note! Vinyl is an excellent conductor of electricity, so it's important to remove any exposed wires.

How to glue the material in the corners?

Corners require special care. When the distance to the corner zone is less than the canvas, the sheet is cut off with an overlap. This part will move to the perpendicular wall surface. Then the second layer is overlapped. Sheets are passed by a special roller.

How long does paper-based vinyl wallpaper dry?

The drying time of the canvases depends on the dryness of the working surface and temperature values. If the humidity is exceeded and the temperature is slightly lowered, then the finish will dry for a long time.

Also, the drying time depends on the type of glue, the amount of solution used and the microclimate in a particular room.

Non-woven surfaces can dry within a day, and paper surfaces for a shorter time period.

Useful information! When drying, the canvas with a paper base can shrink significantly, so you need to make sure that the seams do not move out.

With the help of vinyl wallpaper, you can create a stylish and original interior. When choosing a texture and pattern, you should use the original design solutions and various combinations.

Save Time: Featured Articles Every Week by Mail

The walls of the apartment occupy the largest area of ​​the apartment and visually attract attention. The quality of the wall decoration will set the tone for the entire interior of the room. Therefore, in order for your repair to succeed, we offer brief recommendations, as well as visual video tutorials on how to glue.

Why vinyl?

Firstly, this material has an amazing feature: it repels water, and therefore it will be easy to clean from dirt.

Secondly, the latest developments allow vinyl wallpaper to "breathe", because now wallpaper canvases have micropores.

Thirdly, due to the significant thickness and mass of the vinyl sheet, such wallpapers are easier to glue - they will not tear while sticking to the wall or unfolding the roll. And, of course, such wallpapers will also serve longer than ordinary paper ones.

Before sticking vinyl wallpaper you need to know a few distinguishing features, which significantly affect the pasting technology.

How to glue vinyl wallpaper

Step 1. How to prepare the walls for pasting?

We clean from the previous coating, skin, primer, level and dry the base.

IMPORTANT! concrete walls it is important to prime before pasting: otherwise stains may appear on the wallpaper.

You can use not a store primer, but a highly diluted wallpaper glue. After priming, be sure to open the walls with white water-based paint.

For wall preparation different type there are rules for gluing.

So, for example, before sticking a fresh wallpaper on painted walls, do a small test: scratch the paint in several places, and then cover the scratches with ordinary stationery tape: if the paint cracks when peeling off the tape, and its particles remain on the adhesive tape, you need to paint remove from the entire wall.

On plastic or any other smooth surface wallpaper is glued only after sanding the wall, and wallpaper is fixed to drywall only with a special adhesive.

Step 2. How to cut canvases?

Before opening the first roll, check the total number of rolls purchased, as well as the color and pattern of the wallpaper, the identity of the batch number. Wallpapers of different batches can differ significantly from each other. If at first glance the difference is not noticeable, then sticking vinyl wallpaper on the wall will immediately show color or texture differences.

The easiest way to cut wallpaper without a pattern. Then you will need to measure the height of the wall and add another 5-10 cm to the resulting value for allowances. You can cut such wallpapers on a special table or on any spacious flat surface. After cutting the first canvas, an equal strip is measured from the roll, connecting them at the cut points.

In all other cases, the second and subsequent canvases are cut out only after being aligned with the pattern of the first and subsequent canvases.

IMPORTANT! Mark the canvases in the order they are pasted on the back side with a pencil, and also mark the top and them of the canvas.

When pasting walls with wallpaper with a pattern, much more material will go into marriage. So you need to buy such wallpapers with a margin.

IMPORTANT! Wallpaper when cutting should be unwound from the roll in the same direction. All even and all odd wallpaper canvases with a pattern are identical, i.e. for all of them, the points of coincidence of the figure are similar.

When buying, pay attention to the labeling of wallpaper: on the packaging of each roll, special pictograms should be applied that describe the method of cutting this type of wallpaper.

Figure 1 - Pictograms for determining the method of cutting wallpaper

IMPORTANT! When choosing wallpaper, it is better to lean towards wider ones, since gluing meter wallpaper butt-to-butt faster than usual, the more there will be fewer seams, and the pattern in this case will look more holistic.

Step 3. What kind of glue to glue vinyl wallpaper?

For each type of wallpaper, a certain type of glue must be used. All necessary information about how to use should be indicated on the packaging of the roll.

When preparing the glue, strictly follow the instructions on the packaging of the mixture.

Vinyl wallpaper is heavy, because excess water in the prepared glue, it will negatively affect adhesion: after a couple of weeks, or even hours, after gluing the canvas, they can lag behind the walls and everything will have to be started all over again.

You should only buy glue for vinyl wallpaper: the use of universal adhesives or, even worse, glue for paper wallpaper, they cannot guarantee you a good result of adhesion of the canvas to the wall.

In their class, QUELYD ($ 5 / 300 g, consumption - up to 5-6 rolls), Pufas ($ 3 / 200 g, consumption - 25-32 m²) and Methylan ($ 4 / 300 g, consumption - 32- 50 m²). The smell of these types of glue is either absent or slightly pronounced.

The drying time for each type of glue is also individual, but on average it is at least 12-24 hours. It is recommended to keep the room closed for 48 hours.

Step 4. Vinyl wallpaper: how to glue it correctly?

You will need:

• bucket;
• wide spatula;
• sponge;
• sharp knife;
• pencil;
• smoothing brush (or rubber roller);
• plumb;
• scissors;
• meter;
• brush for applying glue;
• work surface (table).

Work progress:

The cut canvases are laid out on flat surface and evenly cover with glue, using the instructions given on the packaging of the manufacturer of the adhesive mixture.

For ease of transportation and storage of pasted-over canvases, they are folded as follows: one edge is folded with the back side inward by 2/3 of the length, the second by 1/3. When folding the canvas, there should be no bends. The canvases are twisted into a loose roll and set aside.

IMPORTANT! If you do not plan to use a particular roll for more than half an hour, after applying glue to it, wrap the roll in cellophane to prevent premature drying of the edges of the wallpaper strips.

On average, wallpaper needs 5 to 10 minutes to soak with glue (a more accurate figure should be indicated on the roll packaging).

When impregnated with glue, the wallpaper becomes more elastic and often gives a change in shape in width. After drying on the wall, the wallpaper is stretched and all irregularities will be removed in a natural way.

IMPORTANT! If the wallpaper strips were not uniformly impregnated with glue, or one strip in the glue lay longer than the other, this may affect appearance stripes (especially if it's a patterned stripe): The pattern may be shifted or distorted due to the shrinkage of the vinyl after it dries.

Also, if you overexpose the wallpaper in glue, the edges of the strips may stick together and when you try to open the canvas for gluing to the wall, they may tear.

ADVICE: To determine the optimal impregnation time, align the edges of the strip: if they “retreat” when combined, there was not enough time for normal impregnation and you should still wait.

The walls of the room are rarely strictly vertical, therefore, when pasting, one should not focus on the verticality of the corners. To paste the first strip of wallpaper on each wall, you need to draw a vertical with your own hands: for this, use a level or plumb line.

Figure 2 - We mark the vertical on the wall using a plumb line

To ensure adhesion, the pre-primed wall is also covered with a layer of glue (such a “double” ball of glue is often used when pasting walls with heavy washable vinyl wallpaper).

You need to properly hold the wallpaper before pasting like this:

• pick up the rolled roll soaked in glue and climb the stepladder to the ceiling (at the place where the vertical is held);
• bend your left arm at the elbow and carefully unfold the roll, gently throwing it over your arm;
• take the edge of the strip from the larger side and carefully unfasten the wallpaper (ideally, you will only need to grab the edge and lower the canvas to fall along the entire length so that the peeling occurs naturally - under the weight of the weight of the pasted canvas);
• the lower third of the canvas, still folded to the center, must be disconnected after fixing 2/3 of the canvas on the wall.

More details - in the video (for a description of the position of the roll during pasting, see from 8 min.).

VIDEO. How to glue vinyl wallpaper

Continuation:

After straightening, the strip is aligned along the marked vertical and, using a special brush or rubber roller, the wallpaper is glued to the wall:

• first, the selected tool is carried out in the center of the canvas, and then, according to the “herringbone” principle, the strip is smoothed on the sides, removing excess air from under the wallpaper;
• detach the lower third and smooth out in the same way.

Figure 3 - Smoothing a strip of vinyl wallpaper

IMPORTANT! When fixing the strip, remember the allowances for the ceiling and baseboard, equal to 5-10 cm!

Although most wallpapers today are glued joint to joint, if you want to overlap the wall, you need to start from the window: this way, when the light falls on the joints, there will be no shadow.

You can not glue the wallpaper in the corners of the room with whole canvases in full width: one way or another, over time, folds will form in the corner. The strip for pasting the corner must be cut in width so that it extends to the opposite wall by no more than 1.5 cm. and then attached to the wall. So you get not only a competent corner finish, but also a strictly vertical start for further pasting the wall.

It is necessary to smooth the seams with a special roller. It is important to take into account that when pasting walls thick wallpaper strong pressure on the roller may damage the surface of the web. Embossed wallpaper can not be smoothed down with a roller.

Figure 4 - Special rubber roller for smoothing seams

10. The edges of the wallpaper protruding onto the ceiling can be removed in three ways:

• with the back side of the scissors, run along the junction of the wall and ceiling, as if smoothing the wallpaper butt, then bend the canvas and cut off the excess material with sharp scissors along the formed fold line, glue the canvas to the wall without applying an additional adhesive base, smoothing the fresh seam;
• to trim the allowance for the ceiling, you can also use a spatula and a wallpaper knife (first support the canvas in the joint between the wall and ceiling, and the second - run over the spatula, cutting the canvas);
• you can carefully cut the wallpaper using a special cutting tire (when using it, the glue will not get on the ceiling and other surrounding surfaces).

Figure 5 - One way to trim the allowances to fit the length

11. If you plan to stick wallpaper with a border, you should start pasting the surface of the canvases with decorative tape only after the glue has completely dried, i.e. after 24-48 hours (how long the wallpaper dries - an indicator indicated by the manufacturer on the roll label).

Vinyl wallpaper: harmful or not?

When choosing wallpaper, the question of whether vinyl wallpaper is harmful to human health or not is asked by almost all buyers who have heard about the adverse effects of vinyl coating.

If we are talking about a quality product, then the answer is “no, they are not harmful.”

The big disadvantage of vinyl wallpapers is the result of the biggest advantage of this coating: such wallpapers can be washed, and therefore they have an order of magnitude less breathability, and they are more susceptible to temperature fluctuations.

The water-repellent properties of the vinyl wallpaper web are achieved thanks to a special additive: PVC (polyvinyl chloride) or, in common people, vinyl.

If the buyer has no individual intolerance to this additive, then there are no contraindications to buying and pasting walls with such wallpaper. Allergy to PVC - the only thing that is harmful to high-quality vinyl wallpaper.

Vinyl wallpaper: product characteristics

The composition of vinyl wallpaper is PVC applied on a non-woven base or sprayed on paper.

Silk-screen printing or the so-called "flat vinyl", "hot-stamped vinyl" - are among the most expensive types of vinyl wallpaper. Thanks to a specific manufacturing technology and additives, these wallpapers give the effect of silk fabric.

Vinyl wallpaper - moisture resistant, and therefore the weight of the vinyl sheet exceeds the weight of paper wallpaper. The size of the wallpaper is often reduced to the standard: 10 m long and 0.53 m wide in one roll. However, there are varieties of 60 cm, 90 cm and meter wallpaper.

The shelf life of vinyl wallpaper on average does not exceed 10-15 years. With rare exceptions, the manufacturer can promise you 25 years of reliable service for this coating. But in this case, we will talk about buying VIP-class wallpapers for a lot of money.

How to wash vinyl wallpaper

Before cleaning vinyl wallpaper, carefully read the roll insert: it should contain the following pictograms:

Figure 6 - Pictograms for determining the method of cleaning vinyl wallpaper

Well washable wallpapers are able to withstand the treatment of household chemicals, waterproof ones can only be processed with a damp sponge - no more.

Washable vinyl wallpaper: price

Depending on the degree of resistance to moisture and the type of base, vinyl wallpaper can be purchased at a price of $ 4 to $ 10 (domestic manufacturers - Belooboi, Ratin 032 or Fabric 119 (pictured)).

Figure 8 - Marking the method of removing vinyl wallpaper from the surface of the walls

In most cases, it is easy to tear off the top film layer, and the paper backing will remain on the wall.

IMPORTANT! It is impossible to glue new wallpapers on an old substrate - new canvases will quickly peel off!

The paper layer is abundantly sprayed with water from a spray bottle, since it is impossible to remove the substrate dry without damaging the wall plaster. Wash off moisturized paper base can be used with a sponge or, starting from the seams, tear off using a hard wallpaper scraper.

IMPORTANT! Instead of water to moisten the substrate, you can use special solutions to remove wallpaper.

How to glue vinyl wallpaper on the ceiling

The following video will tell you how to properly glue vinyl wallpaper on the ceiling. Please note that the technology of wallpapering on the wall and on the ceiling has no significant differences.

How to glue vinyl wallpaper. VIDEO

Self-adhesive vinyl wallpaper

Another proven way to transform any room is to use colorful self-adhesive vinyl decals. The range of such products is quite wide and you can choose a sticker suitable for any design.

For example, stick a teddy bear on light-colored walls in the nursery or decorate the plain walls of the living room with a stencil pattern.

In any case, it is 10 times faster and more economical than replacing the entire wall covering.

Photo 1 - Vinyl stickers to the nursery

Vinyl wallpaper for painting: how to paint

Mission: paint wallpaper

Decided to paint vinyl wallpaper?

Here are the answers to the most common questions:

What to paint?

Use a long nap roller. This will paint over all the textured elements of the wallpaper, and the paint will lie evenly on the surface of the canvas. The paint must be liquid.

Use a spatula if you want the texture of the wallpaper to be visible. Paint for this type of staining should be thick enough.

What paint?

Choose only water-based paint.

Can it be dyed with other types of paints?

No, unfortunately you can't.

Glue for vinyl wallpaper: price

You can buy glue for vinyl wallpaper at any building hypermarket in the country.

How much does vinyl wallpaper adhesive cost?

Inexpensive:

• QUELYD - $ 5 / 300 g;
• Pufas - $ 3 / 200 g;
• Methylan - $ 4 / 300 g.

One package for pasting the walls of a standard 3 * 4 room may be enough.

The cost of wallpapering walls:

• Kyiv - 45-70 UAH / m² (cleaning walls from wallpaper - additionally up to 25 UAH / m², priming walls - additionally up to 30 UAH / m²);
• Moscow - 200-500 rubles / m² (cleaning walls from wallpaper - additionally up to 40 rubles / m², priming walls - additionally from 20 rubles / m²).

Wall decoration can be done with various wallpapers, but the most popular are considered. Them upper layer- polyvinyl chloride, which is also used for the production of window profiles.

To make the material convenient to use, PVC is applied to plain paper or interlining. Its main advantages: environmental friendliness, ease of maintenance, durability, the ability to hide small wall irregularities. This allows you to use them in different rooms.

Preparation for sticking vinyl wallpaper

Preparatory work consists of several stages. To begin with, old wallpaper is removed from the walls, for which you need a narrow spatula dipped in water. To remove tightly stuck pieces, it is necessary to use special solutions. After that, the walls are checked: they must be straight, clean, dry. If there are cracks, they must be puttied.

In addition, the surface must absorb moisture well. If it is sprinkled with water, the drops of which roll off, then this parameter should be improved - paste over the wall with special paper. If splashes remain on it and form dark spots, then it is necessary to increase the absorbency of the paste coating, wallpaper paste or primer.

The next step is the preparation of glue, the choice of which depends on the type of wallpaper (usually indicated on the package). For vinyl and non-woven products, a specialized composition is required. For proper cooking The contents of the package are poured into water and continuously stirred. Then the resulting mixture is stirred until the powder is completely dissolved.

Now perform the preparation of wallpaper. To do this, measure the height of the wall, add a maximum of 10 cm to it (to cut the edges), draw a line and cut off the strip with scissors. The last stage of preparation is the removal of the vertical. They take a suspension, draw a vertical line along it, along which the first piece of material will be located.

Instructions for gluing vinyl wallpaper

In order for the wallpaper to hold well and serve for a long time, you need to stick it correctly. To do this, do the following:

• take a brush and cover half of the strip with glue;
• fold half of the strip without squeezing the fold;
• do the same with the second half of the product;
• leave it for a while so that it is saturated with the composition (maximum 10 minutes);
• apply the upper half of the strip to the wall, while the lower one remains folded;
• align its edge along the drawn line and leave a margin of 30-50 mm on top;
• press the wallpaper and squeeze out excess air (movement is carried out from the center to the edges);
• unfold the lower part and smooth it;
• the following strips are glued in the same way, not forgetting to align the edges with the previous elements.

How to glue vinyl wallpaper in hard to reach places

• Door area It is pasted over unilaterally, that is, it is not necessary to stick strips on both sides. The product that captures the frame is cut in the jumper area, after which it is well pressed. Unnecessary parts must be cut off. Each subsequent element is adjusted to the opening and cut in the same way.
• Window area pasted over like a door, only work is done on top and bottom of it. First, the strip is glued on top and cut in the area of ​​​​the upper edge, then the bottom is finished. The rest of the strips are attached in the same way.
• Radiator area must be glued to a maximum of 200 mm beyond its structure. In this case, the remaining places are usually painted in the color of the wallpaper.
• Area of ​​sockets and switches. Before finishing these places, you need to de-energize the room, remove all sockets. After that, a solid strip is glued and crosses are cut out opposite the holes. Their corners are bent inward and the sockets are returned to their place.

Vinyl wallpaper is not only practical, beautiful material, but also an ideal way to finish new buildings and private houses.

Video

Gluing vinyl wallpaper is quite easy. They are very dense and they do not tear, do not get wet from the glue, and will not deform when dried on the walls.

Everyone, even those who have never glued wallpaper themselves, can do it. You just need to know some of the nuances of the process and updating the room will be quick and easy.

Most people who have experienced vinyl wallpapering know that they are quite heavy. Heaviness arises from the density of the canvas, but this is what provides vinyl wallpaper with good moisture resistance. Thanks to this, they can be wiped with a damp cloth - they are not at all afraid of wet cleaning.

Useful information:

Often, many housewives have the feeling that, due to their severity, vinyl wallpapers will not hold well on the walls, but all these fears are in vain.

Review: Vinyl wallpaper is my favorite. My husband and I chose wallpaper for a long time in order to glue the hall and settled only on vinyl wallpaper. The first question was this: How to glue vinyl wallpaper, because they say that they are heavy and difficult to glue. However, this is all untrue. They fixed the room quickly and easily. As it turned out, it is easier to work with vinyl wallpaper than with paper ones, since paper ones tear very easily. See the main thing to be quality glue and don't feel sorry for him. Our hall has been completely transformed!

How to choose glue

Probably everyone who makes repairs in an apartment or in a house wants the walls to look beautiful. Therefore, you should not skimp on expensive wallpaper and the choice of glue for vinyl wallpaper should be justified.

Wallpaper must be glued only with the help of special glue, which you will definitely be recommended in the store. Breed and cook adhesive mixture according to the instructions on the packaging. Do not save on glue, you will not lose much, but if expensive wallpapers fall off, it will be a shame.

Preparing walls for gluing

To begin with, carefully measure the height of the wall, not only in the place where you are going to start work, but also in other places. If the differences are small, then choose golden mean and start cutting vinyl wallpaper. If somewhere up to the floor you will miss the length of the wallpaper - it's not scary, all the shortcomings will hide under the baseboards.

Very often, when cutting, you have to take into account the pattern that is applied to them. Be sure to consider and cut the wallpaper so that your pattern matches. Number the cut off sheets of wallpaper so that later there is no confusion in the drawing and it is in the order of numbering that strips must be glued. In addition, I can note that vinyl goes great with PVC panels on the walls.

If there is no need to match the pattern, then feel free to cut the tubes of vinyl wallpaper, observing their height. Glue the wallpaper only in the order in which you will spread the stripes. If you confuse the top and bottom, then the light from the window will be reflected differently, and this oversight will be noticeable.

Vinyl Wallpapering Guide

It is necessary to start gluing only from a window or corner. Needs to be glued right hand around the room. Suppose we started to glue vinyl wallpaper from the corner of the room. Take a strictly vertical line from the corner along the width of the wallpaper. This is necessary so that your first sheet lies flat. All other sheets of wallpaper will be glued first. And if you mow the first strip, then the rest will also go awry and at random.

If you did not putty the walls, then the glue must be applied to the wall. It is worth carefully lubricating the corner, since such places are the most problematic when gluing.

Gently lift up the sheet of wallpaper smeared with glue and, starting from the top, attach it to the wall. Trim it so that the sheet sticks evenly and start squeezing air from the top. When leveling, use a roller or a regular rag. With the same rag, you can remove all excess glue that will protrude along the edges.

Smoothing should be done from the center to the edges in order to expel the formed air bubbles. The bubble is complex and you cannot kick it out - peel off part of the strip and glue it again. If this does not help, then you can arm yourself with a pin. Pierce the formed bubble and pressing with a rag smooth this place.

The second strip of vinyl wallpaper is glued only to the joint with the previous one. Overlapping is not necessary, otherwise it will be ugly. Do not press the strips strongly against each other, otherwise the joints may rear up after drying. All glue that will protrude at the joints, immediately remove with a rag. Don't be afraid that glue will get on front side vinyl wallpaper, when it dries it becomes transparent and you will not stain the wallpaper.

Constantly control the verticality of the glued strips and only after that proceed with gluing the next strip. I used a level, a very handy thing, it beats the level around the room. And so we go around the entire perimeter of the room. After completion of work in the room there should be no drafts. Doors and windows must be closed. Otherwise, the wallpaper will simply move away from the walls.

In the end, I want to wish you pleasant work and magnificent walls that you yourself will do without any problems. Just keep a few things in mind when installing vinyl wallpaper and your walls will look amazing.

tweet

Pin it

Like