What flower beds can be made from tires. A flowerbed of tires: how to do it yourself, how to twist, cut and paint an old wheel tire, original ideas and a photo of a flower garden from wheels in the country

Old car tires are a popular replacement for traditional flower beds. It is convenient to place them in small yards without lawns, along roads, in places with high lying groundwater. The flowerpot from the tire is easy to move to any place on the site, if desired, it can be installed on legs. Another popular garden shape is wheels stacked in the form of a pyramid.

To create flower beds, it is better to use winter rubber products, they are much easier to cut. Old tires are thoroughly cleaned of gravel and other foreign matter, washed and dried. Then they can be painted in the desired shade, painted with an original pattern. Another popular option is flowerpots in the form of volumetric bowls. To make them, zigzag cuts are made on the top of the tire with a sharp knife or electric jigsaw. Turning the product is difficult, this will require significant physical strength.

In order for plants to develop well, it is necessary fertile soil with lots of compost. During the planting season in tires, they are periodically fed with complex fertilizer for flowers. It is important to ensure that the soil does not dry out; planting in a limited capacity should be watered daily.

What flowers can be planted in tires

Most often, annuals are used for planting in flowerbeds from tires. Seeds germinate for several weeks, so it is more convenient to use grown seedlings. When planting, the needs of each particular plant are taken into account. For example, for the normal development of a bush petunia, at least 5 liters of soil are needed, ampelous forms will require up to 7 liters.

For planting in tires, letniki with a beautiful bud shape and a variety of colors are suitable. Regular and terry petunias, bush or cascade are popular. It is best to use modern hybrid forms, they form lush compact bushes with a large number of buds.

Nasturtiums look very impressive: orange, red, yellow. Nasturtium does not tolerate transplanting well, so seedlings are planted in tires in peat cups or sow swollen seeds. In rubber beds, you can plant decorative calendula and escholcia, these species form a beautiful composition. Another example of successful color combination- silver cineraria and bright red salvia.

Suitable annuals include viola, verbena, marigolds, subulate phloxes, celosia. Higher plants look interesting - lupins, cosmea, saffron, fragrant tobacco. As an accompaniment, you can plant ground cover plants, such as alyssum with a delicate honey aroma.

Some gardeners plant perennials in homemade planters. When dividing the bushes, a lot of planting material remains, tires will be an excellent field for experimentation. Small-flowered chrysanthemums can be planted in tires, different types carnations, primroses, daisies, daylilies, ornamental onions. Beautifully flowering plants should be supplemented with fragrant herbs with elegant leaves - thyme, oregano, lemon balm, mint. They not only look beautiful, but also repel pests.

With the return of fashion different kind vintage remember the old cute way to frame garden beds circles from wheel tires. Tires that have served their driving age are easy to get, it’s easy to cut and paint with your own hands, it’s not a pity to replace them with new compositions. Take a look at the photo - these are unusual installations that you can make at your dacha, giving the courtyard a unique charm.

It just seems that a flowerbed made of a tire is outdated and cumbersome. In fact, if you wish, you can create a real work of art from tires, and with minimal cost, which is relevant at current prices for everything. In addition to the penny cost, such a flower bed has a number of other advantages.

Advice. Choose tires from foreign manufacturers - they are much more pliable in operation.

Having come up with the concept of a future flower bed, put the tire on a hard surface (asphalt, concrete, a piece of hardboard - whatever) and chalk a line on its side surface along which you will cut out the excess. Cut out the outline with a knife or jigsaw. Degrease with white spirit and paint immediately before the dust sticks to the rubber.

It is better to paint first with white paint, then with color: this way the finish color will be brighter and more even. Using two or three colors, you can create an ornament. When the paint dries, you can fill the flower bed with soil and plant the plants.

Tires can be placed directly on the ground, hung on chains or cables, and folded into pyramids. Plants are best selected with a small root system: crocuses, marigolds, begonias.

Attention! Before work, thoroughly clean the tire of dirt, even wash it under strong water pressure: this way you will protect the tools from quick blunting.

How to easily unscrew a tire for a flower bed

When arranging a flower bed, a tire can be presented to the viewer not only from the outside, but also from the inside. From the tire turned inside out, a flower-vase "a la Peterhof" is obtained, and if it is painted in marble, then no one will guess about its origin.

To make a flowerpot, you will need not a tire, but a whole wheel, with a disk. Draw a wavy or jagged line on the sidewall of the tire, which will become the outline of the petals, cut it out and proceed to eversion.

Flowerbed from an inverted tire

To do this, lay the wheel with the cut side down, step on the disk with your foot and consistently turn the edges of the rubber up. This is a job for a man, it requires considerable strength and protection of the hands with cotton gloves. Watch the video to see how this operation is performed. The result will be a flowerpot on a rounded metal leg.

Advice. If you plan to turn the tire inside out, it is better to take specimens with maximum tread wear: they are much softer.

Apply paint on it, and not only on the outside, but also on the inside, just below the level to which you plan to fill the soil. Since the flowerpot will be raised above the ground, it can be planted ampelous plants: petunia, fuchsia, bacopa.

The most original tire flower bed ideas

The suppleness of rubber and the flight of fantasy of a gardener who is not burdened with extra money work wonders. Here are a few examples that are quite original and very simple ideas flower beds from unnecessary tires.

• Wall flower bed. The cover is used in a vertical position. To do this, it is screwed to the wooden wall barn or bath. It will look good in a duet of a lushly flowering ampelnik (nasturtium, petunia) and a climbing plant (bean), from the shoots of which you can lay a bright green wreath on top of the tire.
• "Flower Mountain" This is a large facility for those who have a large plot and have accumulated a lot of old tires. They do not need to be cut or twisted: wash, paint each in its own color and fold into a composition. At the base of the "mountain" rests 6 tires, on them - 5 pieces, above - 3 pieces, one tire crowns the mountain, preferably a smaller one. In each, you can plant flowers of a certain type.

Hanging flower bed

• Hanging planter "Bird of Paradise". The tire is cut into strips, from which the tail and handle are subsequently assembled for hanging. The beak, eyes and crest are glued with rubber glue. The finished bird is brightly painted and varnished, except for the inner part, intended for soil and plants. Small flowers are planted in the bird, for example, tagetes.

Your own garden is exactly the place where you want to show imagination and individuality. You can decorate it with anything, any old things, which usually accumulate a lot in the country. Try to make a flower garden from a car tire: time will fly by unnoticed, and the result will please everyone.

The problem of recycling used tires has been of concern to environmentalists since the late 70s of the last century. This is especially true for our country, where there are not yet a sufficient number of enterprises capable of using them as recyclable materials. As they say, in such a situation, everyone is saved as best they can, so we can only welcome those craftsmen who are trying to free landfills from these non-decomposing wastes and, for example, make flowerbeds from tires with their own hands. They can be very different, from worn tires simply dug into the ground, in which flowers are planted, to complex flowerpots in the form of swans with a bright pattern. If you are interested in this idea and want the area in front of your house to be decorated with a beautiful tire, you can read below how to make one with your own hands.

Which ones to use

If you have a choice, then a complex DIY tire bed, the manufacture of which involves cutting out shapes, will look better if you use foreign-made products, as they have thinner and more pliable rubber. In addition, it makes sense to give preference to winter tires, as they are more textured, and worn tires. The fact is that the worn proctor is softer, so the eversion process is easier and does not require much effort.

"Flower"

To make original do-it-yourself ones, you just need to take 4 any tires, preferably the same size. You will need to remove the rubber from the metal rim and cut it so that you get two identical halves. So you need to do this with three tires, and for one, leave the rubber shell intact, as it will be used as the core of the flower. Then the halves and the whole tire must be painted in various colors and dig 5-6 cm into the ground, laying out of them a flower that has 6 petals with a round center. The composition will look more interesting if the core is planted with flowers of one type, and the petals of another.

Pyramid flower bed

This one is very simple and beautiful option flowerbeds made of tires, made by hand, suitable for plots or yards with a small area. For its implementation, you will need 6 tires, which must be painted in bright colors and laid in 3 rows, in which there will be 3, 2 and 1 tires. If the summer cottage is quite spacious, then you can make the design more complicated by laying out a flower of 5-6 tires in the bottom row, of 3 on the second and crowning it with one. Such a pyramid will look especially impressive if you choose a plant with large leaves for the upper "vase".

DIY flowerbeds from car tires in the form of a vase

There is a more complex option, the implementation of which will require a lot of patience. However, the result is usually simply excellent.

So, in order to create original flower beds from tires with your own hands in the form of large vases resembling open flowers, you need:

• Put the tire on flat surface and with chalk draw the petals of the desired shape around the entire circumference. In this case, the size of each petal should not exceed 12 cm.
• Cut the workpiece with a sharp knife or jigsaw along the marked contour. To facilitate this task, you can apply a little liquid soap to the knife from time to time.
• Make longitudinal cuts along the grooves of the tread at a distance of about 10 cm.
• Using a grinder, make several cuts along the outside and smoothly cut the rubber with an indent of 15 cm. If everything is done correctly and the grinder touches the metal cord, white smoke should be emitted.
• Turn the tire inside out so that you get a kind of flower on the leg.
• Decorate using enamel, oil or nitro paints.

To make a flowerbed of tires made with your own hands even more beautiful, you can apply an ornament or stick various decorative elements on top of the base layer of paint using a stencil.

pyramid slide

If you have 3 tires different sizes or at least two and one plastic bucket with a capacity of 0.5 liters, then you can make a pyramid according to the principle of a well-known children's toy. To create it, the tires need to be laid on top of each other in descending order of diameter, stuffing each with earth. From above, you need to install a bucket and plant climbing plants in it and in the tires from the lower layers, so that they hang down from the hill as they grow, covering it all.

Flowerbed-"cup"

A flower bed of tires, made in the form of a cup with your own hands, will also look original. Moreover, if the place allows, then on your site you can even install a whole tea set.

For such crafts, first of all, you need to make the lower part, which will depict a saucer. You will need a tire from a truck, which needs to cut the sidewall with an electric jigsaw (to make work easier, it is recommended to cool the jigsaw blade in soapy water from time to time). Having finished this work, they take the R13 tire and cut off the sidewall with a well-ground, or even better, shoe knife, lubricating the blade with liquid soap. After that, the tire is turned inside out so that the tread is inside, and a bowl without a bottom is obtained. The next stage is the manufacture of the upper part of the mug, for which you need a tire of a slightly larger diameter, for example, from an UAZ. Both sides are cut off. At the same time, on the one hand, it should be done so that the resulting hole is no larger than the diameter of the "bowl". In addition, a strip for the handle is cut out of the scraps of the largest tire.

When all the details are ready, you should start painting and assembling the flower bed. To do this, the "saucer" and the handle are painted in one color, and parts of the mug in another. Further, at the place where they are going to install a flower bed, they lay a piece of cellophane and put a "saucer" on top, and first a "bowl" is placed in its hole, and then the upper part of the mug. Then, with the help of self-tapping screws, the handle is fixed and, using a stencil, mugs are applied to the mug in the color of the "saucer". All! Now you know how to make a flower bed out of a tire with your own hands in the form of a cup. It remains to fill it with earth and plant flowers.

"Pig" and "Ladybug"

If you are interested in the question of how to make it easier with your own hands, but so that it looks original, you can use your imagination. To do this, you can simply remove the "gum" from the rim, turn it inside out and paint it accordingly. For example, if you want a ladybug to appear on the site, you can paint the tire red, apply black dots using a stencil and depict a muzzle with eyes. You can also make a funny pig by painting an inverted tire hot pink and attaching a spiral tail cut from a plastic bottle. After the earth is filled up in such a flower bed and plants are planted, you need to cut out a head with ears and a patch from a piece of rubber from another tire and insert it inside the tire circle, between the flowers.

Flowerbed-"frog"

A flowerbed made of tires, made with your own hands, can be the most different shapes, for example, resemble a frog. For such crafts you will need:

• three used car tires;
• two lids from kilogram buckets of ice cream or ghee;
• enamel PF green, yellow or red;
• self-adhesive colored paper;
• hose;
• awl;
• sponge;
• wire.

How to make a flower bed "frog"

The manufacturing process is very simple: the tires need to be painted green and, if desired, yellow rims applied on top. Then install two tires in the chosen place, and on top, between them, the third. From the hose, also painted with green paint, it is necessary to cut two segments about 1 m long, and from another tire - 4 paws and lay two in front of the lower tires, and two between them, having previously attached "hoses" to them. When the body of the frog is ready, you need to move on to the design of its head. To do this, you need to draw eyes on the lids of ice cream buckets, and a mouth on the top tire with red paint. After that, it remains just to fill up the ground and plant flowers. If you wish, you can turn the frog into an enchanted princess by making her a crown from a plastic bottle painted with yellow paint.

"The sun"

Many summer residents are interested in do-it-yourself in the form of the sun. For such a craft, you will need one tire, bright yellow paint and several plastic bottles. The tire must be removed from the metal wheel and buried in the ground so that only a semicircle remains above the surface.

Then, on the tire, you need to make holes with a diameter equal to the size of the necks of plastic bottles, and, after lubricating them with glue, screw them into the tires. After that, the entire structure must be painted in yellow and plant flowers.

Flowerbed-pool for aquatic plants

Water lilies and can be an excellent decoration suburban area. However, what if there is no way to equip at least a small pond or pool? In such cases, it is enough to make a “water” flower bed from the tire. To do this, it is necessary to cut off the upper part of the tire and dig it into the ground to half. Then it is necessary to lay on top a round piece of a special waterproofing film, which is intended for arranging swimming pools, with a diameter of 1 m more than the diameter of the tire. The edges of the film protruding above the side of the tire must be wrapped outward, secured and overlaid with small round stones or broken bricks. It remains to put a small mesh basket with earth on the bottom of the reservoir, in which the roots of the water lily are planted.

original frames for garden plants can even be created from waste material: both the yard is decorated and the environment benefits. Learn how to make flower beds out of flower tires with your own hands in the country or in the yard. Evaluate the feasibility of such work, get acquainted with the methods of cutting, turning and painting car tires, with the nuances of their competent choice. Compare photos of finished products and choose a master class for making an unusual flower garden that is suitable for the degree of labor intensity.

The feasibility of making flower beds from tires

Used tires are a material in which any landscape designer who imagines how to make flowerbeds from tires with his own hands opens up new possibilities. It is the tire, and not just a sheet of rubber, that has certain advantages that make it easier to work with it:

• Rough cost. Surely among the neighbors there are car owners who dream of parting with old tires. For them, this is rubbish, but for the artist, it is a future work of art that can only be rolled to the site or brought in the trunk.
• Ease and speed of processing. Chalk, a sharp knife or a jigsaw, a grinder and a spray can of paint - these are all the tools needed for such creativity. And the simplest flowerbed of cylinders is built in half an hour: the tire is placed on the ground and “stuffed” with soil.
• Durability. A rubber bed does not attract bacteria and fungi, does not rot, is not afraid of accidental impact and does not collapse under the influence of precipitation. If it cracks after especially severe frosts, it is easy to replace.
• Mobility. A flowerbed from an old tire is a one-piece structure, which, if necessary, can be easily moved to another place. To do this, you just need to remove the soil from it.
• Possibility of transformation. Even DIY tire flower beds can get boring over time. The easiest way to avoid this is to repaint the outside and plant other types of plants.

Figured flower bed from an old tire

Doubts about the advisability of decorating the garden with flower beds from tires are usually associated with the dimensions of the cylinders specified by the manufacturer. In a very modest area, they really can look foreign, and in a large area they can get lost. The problem is solved by combining tires with paths, benches, lighting elements, as well as building flower beds from several tires and multi-tiered compositions.

Lazy Option: Potted Plants Placed on a Stand

How to cut tires and how to do it right

When looking at a wheel that is so huge and rigid, capable of withstanding the weight of a loaded Gazelle or a powerful SUV, the question arises of how to cut car tire for a flower bed. In fact, rubber is even easier to deal with than plywood if you choose the right tool for each step of the job, of which there are three:

1. Ripping of rubber. Best Tool for the first cut - a shoe knife. It can be made independently from the blade of a mechanical saw or a planer blade. The handle of such a knife is wrapped with several layers of electrical tape, which allows the knife to sit firmly in the palm of your hand. This is important as the rubber will resist the blade. The knife is inserted into the incision and moves upwards with the other hand, bending the rubber layer to the side with the other hand.
2. Side processing. You can cut the tires for the flower bed evenly or in waves. In the first case, a shoe or other sharp knife with a thin butt is sufficient; in the second, it is better to use a jigsaw, the saw blade of which is periodically lubricated with grease or a solution of laundry soap. Some craftsmen use a grinder with a small disc, but high speed entails strong heating and even burning of rubber with smoke and bad smell.
3. Cord cutting. Steel cord reinforcement (breaker), which serves as the basis of the tire carcass, is cut with a grinder, less often with metal scissors. You can recognize the presence of steel in the breaker by marking Steel. The absence of such a marking indicates a nylon cord, which is cut with a strong sharp knife.

A car tire is more complex than it looks

Electric jigsaw - the perfect tool for cutting old wheels

To cut a tire for a flower bed and not injure yourself, be sure to use tight gloves and goggles. Especially carefully should be handled with sharp metal cord threads - splinters from them are very painful. You need to work on a wide solid surface: a table or a piece of plywood laid on the ground. With a large amount of rubber dust, which distinguishes Chinese tires, a respirator will be useful.

How to choose and prepare a tire

Working tool for steel cord - angle grinder

If it is possible to choose the material for the flower bed, you can greatly simplify the work of processing rubber with your own hands. To do this, you need to use the data:

• origin of tires: imported ones cut better;
• seasonal appointment: winter more plastic;
• service life: the more worn out, the more pliable;
• cord material: metal will require more effort than polymer.

Well-preserved and brightly colored tread

The degree of wear of the tread should also be taken into account. A clear pattern of checkers will give additional expressiveness to the finished flower bed. But if you plan to turn the tire inside out, you need the tread as "bald" as possible.

In any case, the first operation to turn a tire into a small sculptural form is the cleansing of dirt. The tire is washed under a powerful jet of water from a hose. This will not only add aesthetics, but also protect cutting tools from rapid blunting.

Variants of flower beds from tires and master classes

The fantasy of home craftsmen knows no bounds - lovers of equipping personal plots with their own hands, they came up with dozens of options for decorating flower beds from tires.

Classification by shape and method of manufacture

Flowerbeds from old tires are conventionally divided into several groups:

• horizontal single-tier - the most simple and unpretentious;
• horizontal multi-tiered - the first floor of such a flower bed consists of 5-7 tires, three more on top of them and the last one crowns the composition;
• vertical - a tower is made of tires, flowers are planted in the top and in pockets cut out on the sides;
• in the form of agricultural items: teapots, carts;
• in the form of various animals.

Another interesting variety of flower beds made of waste rubber is hanging planters, with which you can diversify the wall of an outbuilding.

A dull brick is simply unrecognizable

How to mark rubber

To make a flowerbed of tires even, before cutting, you need to outline a line along which the knife or jigsaw will move. It is convenient to do this with chalk or a bright marker that will stand out against the graphite background of rubber.

The brighter the markup, the more convenient it is to work

The first line should be in the shape of a ring. It is carried out in two ways:

1. Measure with a tape measure equal distances from the outer or inner edge of the tire, apply strokes (about every 10-15 cm) and connect them.
2. Holding the chalk with the thumb or forefinger, they cling to the protector (or bead ring) with the little finger and draw a line.

To mark the petals, you will need an inner and outer line. Marks are applied to each, then they are connected with a wavy line of any style. At this stage, it is important to consider that petals less than 7 cm wide do not hold their shape well.

Four wheels and some paint - the result is a bright flower garden

Flower - quickly and reliably

The options presented in the photo in this section are among the easiest to manufacture, but quite spectacular due to competent floral decor. Make a flower bed out of tires for a beginner landscape designer the next one will help step-by-step instruction.

1. Take four identical tires and rinse them thoroughly under running water.
2. Set aside one for the time being, and on three, draw a line with chalk dividing each exactly in half.
3. Cut the three marked tires with a cobbler's knife or a jigsaw.
4. Paint all tires using paint brush or a balloon. Choose a color that matches well with the plants you plan to plant.
5. Lay the tire halves in the form of petals, fill the flower garden with prepared fertile soil.
6. Place the whole tire in the center of the composition and also complete with primer.

Flowers can also be cut from tires

Turtle - feel like you're in the Galapagos

To make a flower bed out of car tires with your own hands turned into genuine creativity, try making a turtle figurine:

1. Prepare two tires for the flower bed. Leave one intact, and cut the protector from the other.
2. Divide the protector into four equal parts, which will become the legs of the turtle.
3. Make a short triangular tail from a piece of tread.
4. For the head, take a flat bottle from household chemicals, for example, from "Mr. Muscle". Its neck will become the turtle's neck.
5. Make cuts in the whole tire and insert paws, tail and bottle into them. Fasten with screws.
6. Color the turtle, draw her face.

On a turtle bed in the garden, low bright flowers look good: tagetes, nasturtium, ornamental cabbage.

Frog - from princess to traveler

If the garden has a pond, plant a cute frog figurine on its shore. This idea is good in that the frog can be made without the laborious cutting of the steel cord. The main thing is not to regret the rich green paint.

Eyes from plastic bowls, paws from a hose and a rubber mat

The body of the animal is laid out from three solid tires in the form of a two-tiered flower bed. For the eyes, take tires of a smaller diameter and install them vertically.

Depending on the desired degree of glamor, they glue with rubber glue or fasten long or short eyelashes with self-tapping screws, paint “bow lips” or a simple smile with red paint. You can complement the image with an arrow, a crown or a pair of ceramic ducks.

Flowers in such a flower bed are placed behind the eyes and in the lower tier. Grasses and sedges are appropriate around the figurine, hinting at marsh vegetation.

Video: One hundred DIY garden frogs

Swan - white grace on a green lawn

If you have learned how to cut flower beds from tires with your own hands to decorate the garden, you can try to make a swan. This work requires some skill, since the part of the tire in such a figure must be cut, turned inside out and reinforced in a certain way. Consider the step-by-step process of the birth of a beautiful bird from rubber scrap.

Cutting tires - the most crucial moment

1. Choose a tire with the most worn out tread for the flower bed, since curly cuts will have to be made on it.
2. Using the pattern in the photo, apply the lines of the head, neck, wings and tail to the protector. Pay attention to the shape of the beak - this is the most difficult area. Some craftsmen make the beak in the form of an ordinary triangle, which makes cutting easier, but the bird loses its realism.
3. At the nodal marking points, drill holes with a diameter of about 10 mm.
4. Cut the rubber along the markings with a shoe knife or electric jigsaw. Start work from the base of the neck of the figure, leading the cut line to the head. To prevent the rubber from vibrating, it is recommended to cut both sides in parallel, 5-10 cm from each alternately.
5. Finish the edges of the parts: clean the rubber and the ends of the cords. Flowerbeds-swans from tires attract children - you should take care of their safety.
6. Turn the wings inside out.
7. Strengthen the neck with a steel bar. To do this, drill two rows of holes in it and further through the entire body to the base of the tail at a distance of about 15 cm from each other. Pass the wire staples through the pairs of holes.
8. Attach a steel bar to the base of the tail and fix the chest and neck of the figure on it, twisting the ends of the wires with pliers. Cut off the excess and give the swan neck a regal twist.
9. Color the finished figure, emphasizing the beak and eyes. It will look especially impressive if it is planted (and attached with screws) in a lake from a tire painted blue.

Instructions in the photo:

Swans on stands, as if on waves

Vase - build a small Peterhof in the garden

The aerobatics of the transformation of tires is considered to be the manufacture of flowerpots with legs from them. It is worth turning the unsightly wheel inside out and painting it - in front of you is a masterpiece of landscape gardening art, which is difficult to recognize raw material.

Elegant flower pot

To create flowerbeds in the form of flowerpots, “bald” winter car tires of foreign production are taken - they are the softest. Serrated or rounded-wavy petals are marked on the sidewall, along which rubber is cut. At this stage, it is important to try to keep both sides of the cut neat, since one of them will become the edge of the vase, and the second - the edge of the stem.

Stages of turning a tire into a flowerpot

Turning the wheel is better with two people. It is placed with the cut down, for emphasis, they step on the disk with their foot, take the edge of the cut with both hands and pull it towards themselves. Gradually move in a circle, pressing down the protector in its most convex part. If there is a chamber inside the wheel, it is cut off at the end of the eversion. Due to the laboriousness of the process, it is recommended to watch a video on how to unscrew the tire for a flower bed with your own hands.

Video: How to turn out a car wheel

The tire flower vase is almost ready, but it looks like it was taken from the seabed. The rubber walls and the disk are cleaned, degreased and painted, and from the inside, also about a quarter of the height, since the ground level will be below the petals.

Geotextiles are placed at the bottom of the flowerpot so that the earth does not wake up in the holes of the disk. Drainage, soil are poured over the fabric and flowers are planted in a flower bed.

Gift for the Mistress of the Copper Mountain

Painting flowerbeds from car tires

Now about how the wheels for the flower bed are painted and how to turn a boring tire into an interesting flower garden. The main requirement for paint is resistance to weathering.

Paint selection and technical points

They paint tires with enamels, oil, acrylic and car paints, nitro paints. To beautifully paint tires for a flower bed, you need to follow a few rules:

• select light colors so that the soil inside does not overheat along with the roots of plants;
• do not apply too thick a layer of paint, otherwise it may crack, especially in harsh winters or in the heat;
• remember the primacy of plants and not let the pattern dominate the flowers.

Bright colors set a festive backdrop for the yard

The design of flowerbeds from tires begins with their degreasing with acetone, white spirit or special liquids for rubber. When the used agent has completely evaporated, the surface is cleaned very fine sandpaper. Then, as a primer, a thin, but continuous layer of white is placed - this will allow any shade to play in full force.

It is better to apply the paint with an aerosol can, then it will penetrate into all the relief areas of the tread, but there is a high risk of staining the grass around. Therefore, the tire is painted with a spray can, laying thick polyethylene under it. Each layer is given time to dry for at least a day.

You can decorate a bed of tires with your own hands with a brush. This is longer, but you can work by first installing the product in a permanent place. With the help of a brush, they also create more subtle patterns and drawings, emphasizing details and shapes.

Folk painting: bright, original, spectacular

Taking into account the general concept of garden decor will allow you to properly paint the tires for the flower bed, while they can:

• leave monotonous;
• decorate with stripes;
• cover with a pattern using a stencil;
• paint on the checkered tread;
• turn into an ethnic flower garden.

Do not rush to throw away unusable tires. They will be burned, adding pollution to the air. Try to turn them into a unique man-made flower garden, which will decorate the garden and warm the soul. Bright, solid and almost eternal flowerbeds of used tires are a wonderful use for the creative impulses of a person living on their own land.

Car tires have long and firmly taken their place among the materials garden design. No wonder. For the reliability of vehicles, the highest quality rubber is used, which is not afraid of aggressive influences. environment It is plastic and durable. Craftsmen have learned to build entire sports towns, artificial reservoirs from this simple material, and cut out various figures. Use a car tire and to create flower beds. This article will discuss how to turn out such a versatile material as a tire for a flower garden in order to create original stemmed flower beds. The recommendations will be supplemented by a visual video at the end of the text.

To make a flowerpot on a leg, you need a whole wheel with a disk. Not everyone on the site has a large assortment of used wheels, however, and not all of them are easy to use for this purpose.

For the first trial version, it is worth choosing a wheel, taking into account the following nuances:

• old domestic rubber is hard and unyielding, it turns out worse than modern, especially imported;
• tires with a heavily worn tread are thinner and softer, so they are easier to work with;
• winter tires are more pliable than summer tires and, accordingly, are better suited for such crafts.

If among the available stocks of a suitable wheel was not found, you can go to the nearest tire shop, where with great pleasure they will give away a few of any of your choice for free. Before starting work, the wheel must be cleaned of dirt and dust. Such a procedure is necessary not so much for aesthetic reasons, but to ensure that the sand does not dull the tools.

We take the desired tire and make markings on it

The work on making a flower bed on a leg includes several stages:

• marking lines for patterns;
• blank pattern;
• directly eversion of the tire;
• product decoration.

Line marking

To make the flowerpot neat and even, it is necessary to draw lines for future cuts. To do this, you need to lay the tire horizontally and draw zigzag lines from the disk to the periphery. Outwardly, the drawing should resemble flower petals. Petals can be made sharp or rounded, thin or thickened - in general, to your taste. It is only necessary to take into account that the openwork edge will be important not only for the future bowl, but also for the leg.

You can draw lines with a marker or even chalk. When working with chalk, there is a significant drawback: it is easily erased, and it may happen that the markup disappears during work, and, accordingly, cutting inaccuracies may occur, so it is more reliable to complete the outline with a marker.

The video below shows how to make a flower bed from a tire:

Figured cutting on the tire

Many high-quality tires, for reliability of use for their intended purpose, are reinforced with metal reinforcement - metal cord. This metal wire greatly complicates the eversion process. But there is a little trick: you can make cuts with a grinder on the outside of the tire to cut the metal cord, but at the same time preserve the integrity of the future flowerpot. Incisions should be made every ten centimeters.

Perform this procedure carefully so as not to cut through the rubber through. The fact that the metal cord is cut will be indicated by light metal dust on the tire, smoke and sparks in the cut area when in contact with the angle grinder. Seeing these signs, you should not deepen the cut further, so as not to make a hole in the vase, the goal has already been achieved.

The picture shows in detail how to cut and then unscrew the tire

The operation of cutting out the flowerpot pattern is carried out with a knife. The knife must be very sharp, then the vase will turn out to be even and neat. The upper part of the wheel must be completely separated from the lower part along the marked lines. This results in a bowl with a lid. The cover is held from the side of the disk. It turned out a champignon mushroom turned upside down. This is clearly visible in the video.

tire eversion

The main and most time-consuming process in the work. It requires some physical preparation and rough male power. A woman is unlikely to cope with such a task. It is more convenient to do this part of the work together. It is necessary to turn the product with the cut side down (put the champignon on the leg). Pick up the edge of the tire with a strong object, such as a crowbar or pry bar, and proceed to turn the tire inside out.

Raw material for the flower bed

At this time, it is necessary to firmly press the wheel disk to the floor. As soon as you manage to turn out a small area, the process will go faster. After half of the tire is turned out, you need to press on the tire from the sides, bringing its shape closer to the oval, this will allow the second half to turn out quickly without additional effort. The video at the end of the article will help visualize the process. In a global sense, the flower bed is ready.

Decoration

A black rubber flower vase has an unpresentable appearance and is unlikely to become a garden decoration. For her to become beautiful flower bed need to be painted and decorated. You should not postpone painting, because immediately after manufacturing the rubber is shiny and clean, which will allow you to decorative trim smooth and durable.

Before painting, it is necessary to treat the vase with a degreaser. You can choose a universal degreaser or a special one for rubber. Various paints are suitable for applying color: enamels, oil and nitro paints. Car paint will work too. More uniform and accurate will be staining with a spray or can.

Our raw version of the flower garden can be decorated like this

Pro tip: flowerbeds made in light colors look more spectacular. But the choice of color and further decoration completely depend on the imagination of the master and the wishes of the owner of the flower bed. You can use multi-color staining, as in the video, as well as use glass, pieces of ceramics and other materials to decorate such a flower bed.

After the paint has dried, drainage and earth are laid in the flowerpot. Everyone, you can plant flowers! Vegetables will also look original in such flower beds, so you get a small impromptu garden. This technique will allow you to combine business with pleasure, especially in a small area. Or, on the contrary, flowerpots with flowers are easy to fit into a garden with beds, since the undoubted advantage of such decorations is mobility.

The video clearly demonstrates how to independently make a flower bed from tires, including turning and decorating the finished flowerpot: