Boiler Ariston instruction manual. User manual (instruction) for the operation of the Ariston electric water heater

18.10.2019

The presence of an autonomous water heating system provides not only comfortable living, but also independence from the whims of utilities. The performance of such systems, their efficiency and safety depends on the technical characteristics of the Ariston boiler, the connection scheme and the quality of the installation.

The key to a long and trouble-free service is compliance with all operating rules and timely Maintenance. Ignoring the requirements prescribed by the manufacturer can lead to premature failure of both individual parts of the boiler and the entire product as a whole. In addition, the possibility of electric shock increases many times over.

The instruction manual contains all the necessary information regarding the installation, connection, conditions of use and the frequency of maintenance of the Ariston storage water heater. In addition, the document includes a list of the most common problems and a method for fixing them yourself, however, for effective solution problems will require knowledge of the design and basic principles of operation of the product.

The device and principle of operation of the water heater "Ariston"

A modern Ariston boiler for 30, 50, 80 and 100 liters is a hermetic structure consisting of the following parts and assemblies:

storage tank:
Electric heating element (TENA);
Magnesium or zinc sacrificial electrode;
Tuning and control unit;
Casing.

The inner surface of the tank must undergo anti-corrosion treatment. Depending on the cost of the product, various modifications may have as anti-corrosion protection:

Titanium coating;
glass-porcelain coating;
A layer of heat-resistant enamel resistant to aggressive compounds.

Besides, expensive models water heaters from the premium manufacturer "Ariston" can have all-metal welded storage tanks made of alloyed stainless steel.

The air gap between the casing and the inner container is filled with a polymeric heat-insulating composition (most often, polyurethane foam). Thermal insulation allows you to noticeably slow down the cooling process, thereby reducing energy consumption.

Heating elements are divided into two main types: "wet" and "dry". Wet are called heating elements that come into direct contact with the heated liquid. In the process of interaction with the working environment, a persistent coating of insoluble scale is formed on the outer surface of the heating element, which prevents normal heat transfer. For corrosion protection of heating elements and inner surface the tank uses a zinc or magnesium anode.

The functionality, informativeness and ergonomics of the water heater from the company "Ariston" largely depends on the design and design of the control unit and settings. There are two types of control mechanisms: electronic and mechanical. Digital systems has an attractive appearance and differs in accuracy of adjustment, however, it is extremely sensitive to voltage fluctuations.

The mechanical block looks “simpler”, and the adjustment accuracy is not the same, however, the reliability of such devices fully compensates for these shortcomings. In addition, the price of models with electronic adjustment is much higher.

The casing of the unit can be made of both metal and polymer materials. The most common is the cylindrical shape, but models of other configurations are in demand.

How to choose the volume of the water heater

Boiler capacity is one of the main criteria to consider. Customer reviews and statistical analysis allowed to determine the required amount of hot water depending on the number of consumers.

For one person, a 30-liter Ariston heater is enough. If two people live in one apartment at the same time, Ariston for 50 liters will fully satisfy the need for hot water. A family of three or four people will need "Ariston" for 80 liters. If we are talking about providing a private cottage or a small restaurant, the best option would be "Ariston" for 100 liters or more.

Operating instructions for the water heater "Ariston"

The beginning of operation can be considered the installation and connection of the boiler to a centralized cold water supply system and electrical network. The quality of installation depends on the safety, efficiency and service life of the product. If, for one reason or another, the boiler is put into operation on its own, special attention should be paid to the points below.

It is necessary to start work on mounting and connecting an Ariston brand water heater by carefully studying the instructions attached to it.

Since the power consumed by the device is quite large, it is necessary to make sure that the characteristics of the electrical wiring used for connection fully correspond to the expected loads and has. The best option for connecting to the mains is a separate cable from the switch cabinet or shield.
Do not use components with visual defects, damaged threaded sections, etc. The safety valve included in the scope of delivery deserves special attention.
Since the mass of the product is quite large, and the temperature of the water contained in it can reach up to +75 0 С, the boiler must be fixed to the bearing surface on metal ones with a diameter of at least 10 mm. It is allowed to use plastic dowels of the same load capacity.
Installation of supply and discharge pipelines must be carried out in strict accordance with the diagram attached to the heater by the manufacturer.
The place of connection to the power supply must be reliably protected from condensate, dampness and direct contact with water.
You can connect Ariston to the power supply only after filling the storage tank with cold water, otherwise the water heater heater may fail.
If all the work is done correctly and the product is working properly, after switching on, the corresponding indicator should light up, indicating that the boiler is working.

Water heater Ariston: operation, maintenance and repair

To ensure efficient and safe work you must know and follow the basic rules for using the product.

Do not turn on the device until it is completely filled. storage tank.
Mechanical or other damage to electrical cables is not allowed;
Before starting the operation of the Ariston water heater, make sure that the grounding is in good condition;
In the event of a malfunction, the unit should be immediately disconnected from the power supply, drain the water and contact the Ariston service center.

Even with proper operation, timely maintenance of the system is necessary to maintain operability. First of all, this is due to the low quality of the water supplied. Despite the presence of filters, a large amount of chemical compounds and mechanical impurities enter the inner tank, contributing to the formation of scale and other contaminants. A regular and internal surface of the drive will significantly increase the life of the boiler. Scheduled maintenance includes:

Preliminary draining of water from the storage tank;

Disconnection of plumbing fittings;

Dismantling the body of the water heater;

Cleaning the heating element and the inner surface of the tank without the use of particularly aggressive detergents, if possible avoiding mechanical and abrasive effects;

Assessing the condition of the magnesium anode and, if necessary, replacing it.

The conservation and subsequent activation of the boiler deserves special consideration.

How to turn on the Ariston water heater after winter: instruction manual

If the use of the device during the cold season is not planned, measures should be taken to preserve the system, and, above all, the water heater itself. For this you need:

Completely drain the water from the storage tank;
Disconnect the plumbing fittings from the inlet and outlet pipes;
Clean the heating element and the inner surface of the tank;
Copiously lubricate the threaded surface of the nozzles with grease or other grease and wrap with rags or PVC film.

To turn on the Ariston heater after winter, you must:

Clean the pipes from grease residues;
Connect the device to the main pipelines;
Make sure that the grounding and electrical wiring are in good condition;
Fill the storage tank with cold water;
Turn on power.

Important! Connecting an empty storage heater to the mains is strictly prohibited!

Due to the simplicity of design, reliability and affordable price, Ariston for 30, 50, 80 and 100 liters is deservedly popular. A wide range of models allows you to choose a model according to your needs and financial capabilities. However, we should not forget that only full compliance with the operating instructions and timely maintenance will ensure efficient operation and prevent premature failure of the Ariston boiler.

2017-01-26 Evgeny Fomenko

Consider the basic rules of how to use the Ariston water heater. Each device comes with a user manual, but often everything is written there in obscure technical terms.

Inclusion

If you are turning on the boiler for the first time, you should do the following:

After that, it remains to wait until the liquid heats up and start using hot water. For convenience, you can mix cold tap water with warm water from the boiler to achieve desired temperature.

Water heating

Depending on the volume of the tank, the time of the first heating will differ. It takes about an hour to heat 30 liters of water to 65 degrees, 50 liters two hours, and 80 liters three hours. Also, the time depends on the heat of the incoming water and the power of the apparatus. In winter, the water comes in cold and it will take longer to warm up.

Boilers with more powerful heating elements spend less time and more electricity on primary heating. For example, Ariston Platinum SI 80 H with a volume of 80 liters and a heating element of 1.5 kW heats water from 20 to 65 degrees in 3 hours and 6 minutes.

For two people, a volume of 30 liters is enough, fifty is enough for a family of 3 people. An eighty-liter model should be enough for 4-5 people living in the room where the water heater is installed. Also, the consumption largely depends on the habits and purposes of using hot water.

Use of shower and bath

If you plan to take a bath, you should take a larger volume of the tank. For these purposes, Ariston TI TRONIC INDUSTRIAL for 300 hp is well suited. To make sure there is enough water, set the thermostat to a higher temperature. This will allow you to dilute the hot water more strongly and due to this one tank can be enough for several people.

When using the shower, initially spend less water. At the same time, you can save even more by turning off the faucet from time to time, using water only to wash off the soap.

Do-it-yourself Ariston boiler repair instructions:

Convenient connection of water-heating equipment from the company "Ariston" consists in the use of manufacturers of an autoclave special flange mechanism. The basic principle of operation of such a mechanism is based on pressing the gasket under the influence of water pressure. As a result, it is possible to completely eliminate not only the leakage of liquid, but also the formation of watery smudges. To avoid excessive heat loss, fastening electrical models water heater from the company "Ariston" is carried out in close proximity to the point of output.

Water heater for a shower in the country houseHeating water in the pool

Water connection

Next comes the connection to the water supply. A scheme is thought out, first drawn on a piece of paper, and then transferred to the walls with real dimensions. Along the lines where the pipes will pass, holes are drilled and clips are installed.

We close the valve at the water inlet, install a tee on the branch closest to the boiler. From it is a pipe to the water heater. A valve is installed on it so that it is convenient to repair the device, a strainer and a check valve.

We lead a flexible hose to the boiler and connect it to the pipe. Usually the input is marked in blue. In the same way, we draw a branch to the watershed point. It is not advised to connect without flexible hoses. On the one hand, it looks better and more reliable, but if there are sudden pressure drops, the tank takes the whole blow.

The inlet to the boiler is marked in blue

After connecting all the nodes, the valves open and all connections are checked for leaks. If they are found, reconnections are made or more tow is added to the threads.

Description of anode rods

The magnesium rod eliminates corrosion of the inner walls of the tank, and also softens the scale that forms on the heating element during the operation of the water heater. It is a magnesium alloy rod on a metal threaded stud and is screwed to the heating element flange, together with which it is inserted inside the water heater tank. The hole thread diameter ranges from M4 to M8 depending on the size and weight of the magnesium alloy on the stud. The larger the size and weight, the thicker the magnesium anode stud. The diameter of the magnesium anode is from 14 to 25 mm. The length of the magnesium part without the stud is from 140 to 660 mm.

Operating principle

The water entering the water heater contains soluble calcium and magnesium bicarbonates, which are present in it in the form of Mg2+, Ca2+, HCO3- ions. Magnesium is the first to react with water, since it is more active than iron and binds free oxygen formed during heating due to a multiple increase in the amount of Mg2+ cations. When the anode is installed in the tank, not hard scale (CaCO3) is formed, but soft scale (MgCO3 or Mg(OH)3), which is easier to remove when cleaning the water heater, or which itself falls to the bottom of the tank during the operation of the water heater due to thermal expansion or contraction of the heating metal element. Over time, the anode will dissolve, so it is advisable to check or replace the magnesium anode once a year, or follow the water heater manufacturer's instructions.

Is it necessary to install a magnesium anode in a water heater?

Modern boilers have tanks made of stainless steel, with titanium, glass-porcelain, enamel coating. In this case, the tank corrodes at the welds and begins to leak over time, so it is necessary to regularly replace the magnesium anode. If it was not originally in the water heater, then it must be installed in the case when scale forms on the heater. In this case, the manufacturer most likely performed welding using a special technology or even made the tank one-piece, without welds. Without an anode, hard scale is formed, which has a lower thermal conductivity. This increases the heating time and the amount of energy consumed, reduces the efficiency, there is a constant overheating of the metal of the heating element. In the end, this leads to its rupture and failure. Therefore, timely and regular replacement of the anode will allow your water heater to work for many years.

What to look for when choosing a magnesium anode?

The main selection criterion is the diameter of the thread on the stud so that the anode can be fixed on the heating element flange or nearby, if such mounting is provided. The second criterion is the length, since meter ones, for example, simply may not fit. The next criterion is thickness. Anodes with a large diameter can touch the heater tubes, although in this case the plate with the mounting hole can be bent. The next criterion is the length of the stud. This choice is rare, as certain electric heaters require a long stud to keep the heating tubes out of the way.

thread diameter on the stud;
length;
thickness or diameter;
threaded stud length.

Prices for the main models name, description, manufacturer, price

When it comes time to buy a heating device, it is immediately better to pay attention to the Ariston 80 liter water heater, the price of which is fully consistent with the quality. Consider some models of heaters from this manufacturer.
.
ARISTON ABS BLU R - vertical storage water heater

The price ranges from 6300 to 7700 rubles.

ARISTON ABS BLU R – vertical storage water heater. The price ranges from 6300 to 7700 rubles.

It has an anti-corrosion coating Ag +;
Additional protection in the form of a magnesium anode;
Uniform heating of water is provided by the Nanomix technology;
Thanks to Absolut Bodyguard System technology, the system is blocked in the event of a lack of water or power surges;
Built-in safety valve.
Built-in external thermometer.
Mechanical control with indicator.
Water heating up to 75o is carried out in 3 hours with a consumption of 1.5 kW.

Boiler ARISTON BLU R - Photo 12

Ariston vls pw 80

water heater ariston vls pw 80 – wall-mounted heater with the possibility of mounting horizontally and vertically. The price for this model varies between 11,000 - 13,000 rubles.

The inner tank is treated with a special Ag+ coating;
Double heating element accelerates water heating by 60% after connecting the ExraPower mode;
ABS 2.0 protection protects the system from power surges and operation in the absence by turning it off.
External water temperature sensors allow you to monitor the state of water heating;
Built-in ECO antibacterial system;
The Nanomix technology accelerates the heating of water, which contributes to the uniform heating of the liquid.
Water is heated up to a maximum value of 80o at a power of 1.5 kW in 3 hours, at a power of 2.5 kW in 2 hours.

Water heater functions

Ariston SUPER SGA

Ariston SUPER SGA – excellent gas heater made in Italy. The price of such a storage water heater is 16,500 rubles.

Device characteristics:

Steel case;
Internal enamel anti-corrosion coating;
Thermal insulation layer made of polyurethane foam;
The presence of a gas valve.
Connection can be carried out both in parallel and in series;
Works independently of the mains;
Ability to control the flame;
External regulators and indicators.

Flat electric water heater Ariston ABS VLS INOX PW Can be installed in vertical and horizontal position. The price for such a model is 17,250 - 19,930 rubles.

Main characteristics of this model:

Steel inner tank with additional protection;
The “fast” function speeds up the heating process by turning on the second heating element;
Antibacterial protection system;
Protection against overheating, power surges, switching on without water;
Built-in “Nanomix” system;
The presence of an electronic thermometer;
There is a system "Autodiagnostics";
External display with control buttons.
Water heating is carried out to a temperature of 80o by one heating element in 3 hours 06 minutes with a consumption of 1.5 kW, with the “fast” system turned on in 1 hour 51 minutes with a consumption of 2.5 kW.

Advantages of Ariston technology

Like all Ariston appliances, the water heaters of this company have a lot of benefits:

The first of these can be called stylish design which helps to decorate any interior. Moreover, each of the models is created in accordance with the latest technologies.
Ariston 80 water heater is different longest service life . This effect was achieved due to the fact that internal walls storage tank are covered with a layer of modern material that protects the tank from plaque and rust.
Built-in latest dividers, prevent mixing of already heated and cold water . This allows you to keep the temperature of the liquid. Also, the Ariston heater is protected from overheating, thanks to built-in temperature control sensors.
Presence of a safety shutdown device , which is triggered at moments of a sharp change in voltage.
Using Ariston water heaters, users can significant savings on gas or electricity consumption . This is facilitated by the presence of thermal insulation, which keeps the water hot for a long period of time.
Many models of water heaters equipped with bacteria protection which makes it possible to use purified water. If there is no water in the system, then you can not worry that the water heater will turn on, as it is equipped with special protection.

Repair

If we break down the actions to repair the units into several stages, they will be as follows:

It is necessary to diagnose the type of failure.
Determine the fault
Replace the failed assembly or part.

Features of water heaters "Ariston"

We are considering the repair of the Ariston electric boiler. Models from 50 to 100 liters. One of the advantages of the models of this company is the use of a classic autoclave flange. This solution does not allow water to flow through the gasket. The gasket is pressed against the pressure of the water in the water heater. The larger it is, the greater the tightness. But Chinese manufacturers have learned to fake this gasket, therefore, when purchasing it as a replacement, you need to look for a “native” one, avoiding fakes.

Boiler "Ariston"

The next feature is that the heating element is equipped with an extended knife contact, so heating elements from other manufacturers are not suitable.

The water heater is supplied with a magnesium anode.

Examination

Before starting the repair of Ariston water heaters, it is necessary to check whether there is electricity in the house and whether the water has been turned off. Often this factor misleads inexperienced users.

The next step is to check the correct connection to the mains and cold water. If these positions are maintained correctly, then the problems should be sought in the following:

The circuit breaker is off.
The automatic safety device has been activated.
The heating element burned out.
Electronics broke.

Replacing the heating element

If you find out that the heating element has burned out, then it needs to be replaced. Try to repair the Ariston water heater with your own hands.

Self repair

For this you need:

Disconnect the boiler from the power and water supply.
Unscrew the two screws and remove the protective box.
Turn off the power that is directly connected to the heater.
After unscrewing two more screws, remove the cover of the water heater.
Remove temperature sensor and thermostat.
Remove from water inlet check valve and drain the water from the boiler.
Unscrew the fixing nut with an adjustable wrench and remove the fastening on the bar to which the flange is attached.
Move the heating element inward, unfold and pull out. Do this carefully so as not to damage the flange. Don't forget to put a container under the flange, as water will still flow.
Replace the heating element or clean the flange and tank from dirt. It is not recommended to remove scale from the walls, as this is an additional protection of the tank from corrosion. Remove only the scale that has crumbled inside or is easily cleaned with a rag.
Replace or clean the magnesium anode. It spins next to the shade.
Replace all parts in reverse order.

At the end of the assembly, check the tank for leakage. If it leaks, replace the gasket.

When replacing the flange, it is important to put the same design as it was. Otherwise, the gasket may break, and the boiler will start to flow.

A heating element

If you do not regularly clean the water heaters, then the anode and the heating element will collapse, despite the good adaptation of Ariston products to our water. Therefore, it is so important to regularly inspect and repair the Ariston boiler, you can do it yourself.

Fake Parts

Connecting the boiler Ariston

It is better if this work is carried out by specialists. The rules to be followed when installing the device are given below:

It is necessary to inspect the safety valve, which should not have visible flaws. If they are, then the damaged part should be replaced.
Plastic dowels are used for driving screws.
Be sure to check all grounding elements.
The electric heater requires a separate power line to operate. The use of extension cords is strictly prohibited. The socket is placed in a non-humid place.
In operation, you must use the plug that came with the kit.

The water heater Ariston 80 performs the following functions :

Turn on/off . After switching on, the whole system starts up, which is due to the lights on, the water temperature in the boiler will be displayed. If the indicators are not displayed or flashing, this indicates a system shutdown.
Water heater ariston abs vls 80 has power level adjustment function , which makes it possible to set the necessary indicators.
Water heater ariston abs vls pw 80 allows you to use antibacterial function , which can be activated or deactivated by holding the "power" button for 5 seconds.
Possibility to adjust the temperature using the "+" or "-" buttons in the range from 30o to 75o; The set values are not fixed. After switching on again, the values \u200b\u200bmust be set again. Standard temperature values are 75 °, power - 1500 watts.

Water heating

The system for using the heater is very simple and straightforward.

The device may only be installed by qualified personnel. Before installing the tank, it is necessary to check the serviceability of the electrical wiring. Specialists must make sure that the voltage in the network corresponds to the permissible voltage for the tank, specified in the instructions for use of the device. The use of adapters or extensions is excluded. In the same electric line connection of additional electrical appliances is not allowed. The outlet must be dry and away from water sources. If the power cord becomes damaged over time, it can only be replaced by a specialist.

So, the tank is already connected, how now to turn on the Ariston water heater ?. Instructions for use will help you connect the heater.

First you need to turn off the hot water supply in the apartment. Otherwise, the contents of the boiler will flow into the riser. Despite the presence of a non-return valve, turn off the water.

Open the faucet, wait until the water has completely drained. When the liquid stops flowing, close the valve.

See also: How exactly does an instantaneous water heater work?

Cold water and heated water enter the boiler and back through two pipes. On the tank, they are marked with a blue and red label, respectively. These mixers on both pipes need to be opened. First turn on cold water, then hot. If you forget to turn on the hot water faucet, it will flow through the riser to the whole house.

When the air comes out of the device, and the liquid flows in an even stream, the boiler can be connected to the power supply and the desired program can be selected. Do not block the cold water pipe, the supply to the boiler is regulated automatically.

After five minutes, check the water in the tap, its temperature should increase. If so, then you did everything right.

There are also compact water heaters. Mounting such devices will not be difficult. They are installed in place of the old crane. After installation, the tank must be connected to a pipe through which cold water flows. Then turn off the hot water faucet and plug the appliance into the outlet. Turn on the water and you're done. To install such heaters, it is still better to contact specialists.

Any heating tank must be connected to a separate outlet, which is removed from sources of moisture.

When the boiler is finished using, it must be turned off. How to do it? Unplug the cord from the tank. Wait for the water in the tank to cool down. Close both taps, one of which supplies water to the tank, and the second releases hot water. After that, open the hot water riser.

If the boiler is used from time to time, then it is not necessary to drain the water from it. Water contributes to the fact that the parts in the device are less corroded. Drain the water just before using it again. When you do this, rinse, dial clean.

If a situation arises when the boiler needs to be emptied of liquid, then this can be done using the check valve installed on the device.

Be careful! When the tank is empty, its inclusion is strictly prohibited!

In order for the Ariston water heater to serve you for a long time, it needs care. Every six months it should be cleaned to protect the heating element from breakage. Any malfunction is best repaired by specialists.

To notice this, pay attention to the following:

water heats up noticeably longer;
hissing is heard during operation of the device;
the heater turns on and off more often.

With proper operation and timely care, the unit will last a long time, since Ariston uses only original spare parts for its devices. Heating elements are made of high-quality copper, a special system protects the device from overheating and freezing. Models are characterized by a flat shape, easy installation. Tanks are produced in volumes of 30, 50, 80 and 100 liters. The devices have a water purification system from bacteria. The displays are functional and easy to use.

Do-it-yourself Ariston boiler repair

Repair work related to the elimination of breakdowns in gas appliances require the involvement of qualified specialists, and the repair of an electric boiler can be done independently.

Major mechanical failures are most often manifested by tank leaks., from which water begins to ooze or drip during operation. The cause of this failure may be corrosion in the areas of the welds or a malfunction of the reverse protection system of the valve, which operates and performs an emergency reset. In this case, it is necessary to eliminate the excess level of water and air pressure by means of a reducer. Any depressurization of the storage tank will require the purchase of a new tank. If such a defect is insignificant, then it is enough to replace the sealing gasket.

A rather inexpensive measure is the independent replacement of some electrical parts, including a heating element, a bimetallic thermostat, sensors or switches. In case of prolonged heating, noise or hissing, as well as in case of activation of the ABS system shutdown protection, the replacement of the heating element is required, the average service life of which does not exceed five years. Replacement is carried out after de-energizing the device, draining the water and removing the flange.

It is very important to systematically check the magnesium anode, which is a consumable item and is intended for effective protection the inner surface of the tank and the heating element from corrosive changes. When the anode is thinned by ½ of the original volume, a mandatory replacement is carried out

The heating element is able to last much longer if the so-called “dry” heating element is installed in the structure.

Installation

Do-it-yourself Ariston is a simple matter if you carefully read the instructions and follow its instructions. Of course, you can invite specialists who will do everything quickly and efficiently. The only “but” is the price of this service. For example, in Moscow it is from $100. Meanwhile, having minimal skills in working with plumbing, you can cope with this task in just 2-3 hours. Considering that you will spend some amount on expendable materials, the net savings will be approximately $60.

Water heater connection diagram.

Evaluating the pros and cons, consider the risk of flooding the neighbors from below, if something goes wrong, measure your strength. The advantages of self-solving this problem include:

saving time and money;
acquisition of skills that you will need in the process of operating the water heater.

Access to the storage water heater (boiler) must be absolutely free, and the wall for fastening must be strong, capable of withstanding double the weight (with a unit capacity of 50 liters, calculate the load of 100 kg). Determine the condition of your electrical wiring: is it capable of handling a significant additional load? For example, for a water heater of 2000 W there should be a cross section copper wire 2.5 mm². Keep in mind that if there are old water pipes in the apartment, sometimes you have to replace them first and only then connect the boiler. Find out how much current your electricity meter is designed for. If less than 40 A, you will have to replace it.

Back to index

Inclusion

If you are turning on the boiler for the first time, you should do the following:

We examine the inlet pipes to the water heater and find the check valve. If the normal pressure is exceeded, water will pour out of it. Therefore, you should either substitute a small container under it, or connect and bring the tube into the sewer.
We collect a tank. We open the valves at the inlet and outlet of water from the device. To do this, turn the handle of the taps 90 degrees counterclockwise. Open the hot water faucet. We are waiting for the container to be filled. If water starts to flow, this means that the Ariston boiler is full.
It is advisable to visually inspect the pipes for leaks. If water drips somewhere, it is necessary to turn off the water and call specialists to fix the breakdown.
We turn on the device in the network. To do this, either insert the plug into the socket, or turn on the machine to which the electric cable is connected. The machine may be located near the installation site or in a switchboard.
Set the desired water temperature. It is recommended to set the level of 60-65 degrees. At higher temperatures, scale actively accumulates, and at lower temperatures, harmful bacteria can begin to multiply.
The temperature can be set with a mechanical knob, as in the Ariston SG 30 OR model, or with buttons on the control panel, as in the Ariston VELIS EVO PW model.

After that, it remains to wait until the liquid heats up and start using hot water. For convenience, you can mix cold tap water with warm water from the boiler to achieve the desired temperature.

Water heater Ariston

It is very important to prepare in advance all the tools and consumables for the work. Before starting installation, make sure you have the following tools: .

Tools for mounting storage water heater.

roulette;
perforator with a drill;
wrench;
spanners;
wire cutters;
pliers;
two types of screwdrivers.

Expendable materials:

Unipack type paste or FUM tape;
tow;
3 stopcocks;
3 tees;
2 connecting flexible hoses (if not included);
metal-plastic pipe of the required length.
if it is necessary to replace the wiring - a three-wire wire, a socket or an automatic machine.

To install a storage electric heater, you will need an auto switch for 32-40 A, a PVA cable 3X6 -3X8.

Back to index

Installation

Installation of the water heater "Ariston can" is done by hand.

Installation of the Ariston water heater must be carried out in strict accordance with the instructions.

Installation instructions for the Ariston water heater, of course, are included with the purchase of the unit.

It is necessary to check the outlet and test the voltage in the electrical network. The socket must be grounded and have a separate wire from the shield.

Fastening

Since the weight of the device will be quite heavy due to the large amount of water, the wall on which it will be installed must be strong. The bolts with which this structure will be attached must also be strong. It is better to use metal fasteners: hooks, bolts, screws, with a diameter of 10mm. The connection of the Ariston water heater should be close to the place of hot water supply so that there is no unnecessary heat loss. It is necessary to clearly mark the place of attachment of the water heater using a level and a tape measure. Make sure that the load is evenly distributed, there are no distortions. Using a drill, holes are drilled in the wall, to which brackets and holders are attached, on which the boiler is hung.

Some models are installed on the floor. In this case, the symmetrical installation is adjusted by the feet of the appliance.

Connection to the water supply system

The hoses and other connecting elements used for connection must withstand the design pressure and temperature of about 80 degrees. When connecting to a water supply system, it is best not to connect two different metals to each other, such as copper and steel (in pipes). To do this, you need to use a dielectric adapter.

With the help of a valve included in the device, a pipe for cold water is connected. The hot water pipe is connected using a pipe. Your task is not to confuse these two inputs when connecting the Ariston boiler.

Start installation with a cold water pipe, it is marked in blue. A sealing tape or tow is wound on the pipe. If you take tow, then it must be lubricated with a special paste. Then the tee is screwed on. There will be a relief valve at the bottom of the tee. It is installed in an upward direction. This valve will control pressure and superheat. On the side of the tee we put an emergency drain valve. You will use it if you need to completely drain the water from the boiler.

The shut-off valve is placed at the bottom and the boiler is connected to the water supply through an adapter.

Also, through a shut-off tap and an adapter, a connection to hot water is made.

The correct scheme for connecting the Ariston water heater to the water supply is shown in the video:

Electrical connection

Only after the connection to the water is made, we connect it to the electrical wiring. Since this unit consumes a lot of electricity, the wires must also meet the requirements.

Connecting the Ariston water heater to the mains is as follows:

Disconnect the water heater from the electrical network.
The power supply wires are connected to the screw terminals of the thermostat.
Be sure to observe the phases when connecting: - L, A or P1 - phase wire; N, B or P2 - neutral wire.
Connect the ground wire to the clamp on the boiler body.
Connect the test lamp terminals to the terminals.
Press the thermostat button.
close lid
Before switching on the power supply, it is necessary to check the filling of the boiler with water.
Turn on power.

Scheme of connecting the Ariston boiler to electricity through a double circuit breaker:

Boiler connection

The electric wire for the boiler must pass through the wall or be hidden in a corrugation made of non-combustible material. The connection cable must be three-core, preferably copper. Installation of the Ariston water heater must provide for grounding. Grounding is not done on metal objects and pipes, such as sewers, plumbing, and so on.

Beginning of work

Before starting work, you should once again make sure that the flange is exactly in the center. If it is slightly off to the side, install it correctly (loose or tighten). After filling the tank with cold water, open the hot water outlet cock on the boiler to allow excess air to escape, then close it.

When you turn on the heating pressure on the body of the water heater, the lamp should light up. Sometimes during operation, the cold water hose heats up. In some Ariston models, the temperature can be adjusted with a special knob connected to the thermostat with a screw. Economy mode is marked on the unit with the letter "E".

In the event of an unexpected breakdown or malfunction of the new water heater, you can contact the workshop warranty repair in own city. The usual warranty period for the Ariston boiler is 1-2 years, depending on the model (the same as for the Termex, Bosch or Nova Tek water heater). If before the expiration of this time you tried to open and repair the unit yourself, then most likely you will be denied free warranty service. Keep the warranty card issued by the store until the end of the warranty period.

The storage water heater from the company "Ariston" - the unit is quite simple to operate and reliable. If you strictly follow the instructions during installation and when further use, it will serve you faithfully for more than one year.

Boiler installation

Accumulative water heaters heat water for a certain time in special tanks from 10 to 150 liters and more. In small city apartments, most often they put boilers of 50 or 80 liters. Fastening to a fragile wall (for example, drywall) is excluded. There is no fundamental difference in installing a small or large tank, except that the larger the unit, the more powerful the fastening elements.

Scheme of the storage water heater.

Break the work into several stages. The main and most important stage is fixing the boiler to the wall. If the container is horizontal, it is advisable to attach it higher, under the ceiling, if it is vertical - at the level of the person's head or chest. Under the boiler, the floors must be waterproofed in case of leakage.

You need to work carefully, avoiding scratches and damage to the outer surface of the unit from tools. It must also be borne in mind that the electronic control unit of the boiler does not have an autonomous power supply, in case of any power failure, the settings will fail and a restart will be required.

Use bolts, hooks, screws with a diameter of at least 10 mm. Using a tape measure, mark the level of the attachment points. Make sure that all dots on reverse side of the unit provided for installation have been used, do not skew. Drill holes with a drill, then attach brackets and holders to them, on which the boiler is hung.

Ariston water heaters are popular in the world market. This is due to the high quality of the products and the long service life, if the technical requirements both during the installation of the equipment and during its operation.

Popular models of Ariston water heaters.

Why Ariston water heaters are created

Ariston boilers are designed to heat and maintain the desired water temperature. Equipment is needed if there are interruptions in the supply of hot water. Installation of equipment can be carried out in bathrooms (bath, toilet).

Models and displacement

Due to the popularity of products, the manufacturer produces a large number of models with different characteristics. Models with electric heating elements differ in volume and the presence of a storage tank, power, water temperature limit. The higher the power of the heating element, the higher the maximum heating temperature.

There is also a difference in dimensions, weight and installation methods (vertical, horizontal).

The list below shows the most popular Ariston brand models on the market - a water heater and its brief description:

ABS VLS (VELIS) EVO PW 50- electric storage water heater. Volume - 50 l, equipped with a quick heating function, an electronic thermometer to monitor the water temperature, a safety device to protect against switching on if the tank is empty.
NTS 80V 1.5K SU 3700366- electric storage water heater. Volume - 80 l. Equipped with an external temperature controller in the form of a round scale.
ABS VLS EVO INOX PW 80 D- electric storage water heater. Volume - 80 l. The tank consists of 2 40-liter compartments. It has the possibility of accelerated heating, in the presence of 2 heating elements.
ABS PRO R 100V- electric storage water heater. Volume — 100 l. The model is equipped with protection against overheating (ABS security system). Energy savings are ensured by polyurethane foam insulation. Vertical installation provided.
ABS ANDRIS LUX 30- electric storage water heater. Volume — 30 l. The model has a bottom water pipe connection. The tank is made of steel, the inner coating is Ag+.

There are also small models with tanks of 15 and 10 liters. All the mentioned products in Tyumen can be purchased at the QUANTA + online store.

Typical boiler diagram Ariston 50

Components of the electric storage water heater Ariston.

Electric storage water heater Ariston consists of:

outer case;
bracket;
internal tank;
hot water outlet;
magnesium anode;
cold water inlet;
heat insulator;
thermostat sleeves;
heating element (TEN);
flange;
thermostat;
power cable;
regulator knobs.

To connect the Ariston boiler correctly, you must follow the manufacturer's instructions.

First, the water heater is mounted on a wall or a supporting surface and a drain is provided from water pipe(cold water). It is most beneficial to install the device as close as possible to the source of water supply - this allows you to minimize heat loss.

If there is a collector in the system, a separate cold water supply pipe is transferred to the installation site of the water heater. In the absence of a collector, the nearest segment of the water pipe is cut, a standard tee is installed at the cut site.

The installation method of the tee depends on the material from which the pipes are made. On plastic fasteners is carried out using a special soldering iron, on metal - threaded.

A ball valve is installed on a separate section of the water supply system, designed to shut off the supply of cold water.

Scheme for connecting an electric storage water heater Ariston.

To connect the water heater to the water supply, you should:

Pay attention to the hot and cold water pipes - it is important not to confuse them. A check valve is installed on a cold one, it can be included in the standard kit. Hot water is connected via a pipe. First, a cold water pipe is mounted, then a hot one.
A special tape is wound on the threads as a sealant and sealant, this is recommended by the manufacturer.
A tee is installed on the cold water pipe, at the bottom of which there is a relief valve. A tap is attached to the side to completely drain the water from the tank in case of emergency possible under abnormal pressure or heat. A shut-off valve and an adapter are installed under the tee at a short distance. The next step is connecting to the water supply.
Connection to hot water is also made by installing a shut-off valve.
In the case of connecting different metals, adapters should be used.

The connection to the mains is carried out as follows:

A separate machine (RCD) is installed in the switchboard, it is connected to the central automatic fuse. A three-core cable is pulled from a separate RCD to the boiler, which is placed in an external cable channel (or a special gate is punched in the wall).
It is recommended to install a 16 A fuse as a switch, since the socket and plug are subject to heat and moisture. In addition, the cost of waterproof electrical equipment is higher than the cost of the machine. The "switch" is closed in a compact cabinet with a removable panel.
A separate RCD machine and a “switch” are connected by a wire.
A three-wire wire is connected to the heating element, for this the bottom panel is removed from the water heater.
Then the output of the machine is connected to the boiler.
The next step is to wire the ground, phase and zero lines to the appropriate connectors.

Scheme of connecting the Ariston water heater to the mains.

Before turning on the device, you must make sure there are no leaks and correct position flange (strictly in the middle). Then fill the tank with cold water and open the hot water faucet to release the air. After the air is released, the valve closes and a trial run is carried out.

How to identify a malfunction

To carry out repair work, the user needs to notice a malfunction in the operation of the water heater in time. Ariston boilers are often equipped with an electronic display on which messages appear in case of equipment failures.

Direct signs of a malfunction can be:

operation of the machine at the moment the boiler is turned on - this indicates a malfunction of the heating element;
heating water above the maximum allowable temperature - this indicates a failure of the thermostat;
heating water below the required indicators - this may indicate contamination of the heating element, the appearance of scale;
drips at the bottom of the tank and on its walls;
breakdown of the information board, which most often does not cause significant failures in the overall functionality of the device, but can reduce comfort during its use.

The history of the Italian company Ariston dates back to 1930. Then the product range was limited only to scales, but today it includes multifunctional household and professional appliances. Among the favorites is a reliable and durable Ariston water heater. It differs from competitive technology in a key ratio of qualities for consumers - price-quality.

Long history

In 1930, thanks to the quick-witted Aristide Merloni, a new brand appeared on the household appliance market - Ariston. The family business specialized in the production of scales. A little later, the assortment was replenished with electric heaters, cylinders for liquefied gas. Flowing and storage water heaters in the catalog on the official website appeared relatively recently. Further, the business was transferred to the sons of the founder - Vittorio, Antonio and Francesco. As a result of the division of the company, there were three main divisions:

Ardo;
Merloni Elettrodomestici;
termosanitary.

All companies specialize in the production of equipment under the brand name Ariston. Until today, one of the divisions has been intensively acquiring shares in other enterprises, expanding its composition, assortment and approaching the main market competitors - Bosch, Siemens, etc. The repurchased brands include the well-known Indesit and Scholtes, as well as 50% of GDA, which produced household equipment Hotpoint.

Today, factories in different countries are engaged in the production of instantaneous and storage water heaters Ariston, as well as other equipment:

Poland;
Russia;
Turkey;
Italy;
France;
Portugal.

In terms of turnover, this holding ranks third in the world ranking.

Rating of the best models of Ariston water heaters

The official website of the company is full of various Ariston water heaters. They differ in price, installation method, technical specifications, principle of operation and design. According to these criteria, a model range of the most successful variations was selected, both in the opinion of specialists from the service center and users.

Ariston ABS BLU EVO RS 30

The Ariston 30 heater has a storage heating system. His small size 44.7x44.7x41 cm allow installation in a vertical position under the washbasin. The storage water heater of 30 liters is powered by a voltage of 220 volts, while consuming a power of 1.5 kW.

Ariston ABS BLU EVO RS 30

Thanks to the latter indicator, the device is able to heat water up to a temperature of 80 ° C, and it takes only 70 minutes to get the optimal temperature of 45 ° C. As an additional function, there is a thermostat and an overheating protection function. The price of Ariston 30 liters is 5800 rubles.

Ariston ABS VLS EVO QH 80 D

The Ariston 80 l water heater has a storage heating system with an electric tubular heater. It can be installed both vertically and horizontally. Boiler Ariston consumes power of 2.5 kW from a power source with a voltage of 220 V.

Ariston ABS VLS EVO QH 80 D

The device is capable of heating water up to a temperature of 80°C. EVO Ariston 80 liters is equipped with a stainless steel coated tank. Separately, it should be noted the protection system against overheating and starting without water. Equipment dimensions 50.6x106.6x27.5 cm, weight - 27 kg. There is an Ariston water heater of 80 liters - 16,000 rubles.

VIDEO: Overview works by Ariston ABS VLS EVO QH 80 D

Ariston ABS Andris Lux 15 UR

The Ariston water heater for 15 liters has a boiler with a silver coating on the inside. The electric device has a rated power of 1.2 kW, thanks to which the heating element is able to heat water up to a temperature of 75 ° C.

ABS Andris Lux 15UR

The device is installed on 15 liters under the sink, due to this you can save a lot of usable space. The cost of the accumulative electric water heater- 7000 rubles.

VIDEO: Overview of ABS Andris Lux 15 UR

Ariston 50 ABS VLS Evo Inox

The water heater for 50 liters has an attractive design and small dimensions of 50.6x27.5x77.6 cm. The design includes an immersion heating element, which has a power of 2.5 kW. Ariston for 50 liters can heat water up to a temperature of 80 ° C.

Ariston 50 ABS VLS Evo Inox

The device operates from a power supply with a voltage of 230 volts. The Ariston electric water heater is equipped with a display, safety valve. The price of the apparatus for 50 liters is 21,500 rubles.

VIDEO: Ariston 50 ABS VLS Evo Inox review

A capacious storage water heater Ariston for 100 liters is installed on the wall surface. Its dimensions are 125.1x50.6x27.5 cm. The design includes an immersion tubular heater. The device is equipped with an electronic display that shows all operating modes and other necessary information. Inner part the tank is covered with a special Ag + material, and an enameled heating element is also built into it.

Ariston 100 liters ABS VLS EVO

The 100 l storage water heater has a double boiler system, so that the water warms up much faster. Already 29 minutes after switching on, you can take hot shower. The intelligent system of the device automatically remembers all heating cycles, so the equipment will prepare water by the time it is used most often. The price of a model for 100 liters is 19,900 rubles.

VIDEO: Overview of Ariston 100 liters ABS VLS EVO

Ariston ABS VLS Inox PW50 (cumulative)

This is a horizontal 50-litre machine, which has a flat rectangular shape, thanks to which it fits perfectly into small-sized rooms. In addition, it has the ability to work with several water intake points, which makes it possible to create autonomous system heating water for all faucets installed in the house.

Ariston ABS VLS Inox PW50

The power of the equipment is 2.5 kW, it has 2 heating elements. As a safety feature, Ariston 50 liters uses a device shutdown system with an empty tank and overheating. The nominal liquid heating temperature is 80°C, and the outlet pressure is 0.2-8 Atm. In online stores, such equipment is sold at a cost of 19,000 rubles.

VIDEO: Ariston ABS VLS Inox PW50 work review

Problems and malfunctions of Ariston water heaters

Ariston equipment is rightly considered reliable, able to work for many years without causing inconvenience. However, regular maintenance and preventive inspection of the equipment is necessary.

Among the main faults are:

failure of the electronics - only the sensor, heater or switch may break, or maybe all at once;
during operation, the machine may knock out, which means that the equipment lacks “cash” voltage - for correct operation, you will have to turn off all powerful electrical appliances in the house for the duration of the wash;
the problem with the ignition may be poor-quality wiring.

All problems are solvable, but on condition that repairs and maintenance are carried out by service specialists.

VIDEO: Why the boiler does not turn on and does not heat