Installing blinds on windows. How to quickly and correctly hang vertical blinds - instructions How to hang aluminum blinds on plastic windows

27.06.2020

Housewives do not always prefer curtains and tulle to decorate a window opening. Many of them replace the usual decor of blinds, which do an excellent job of regulating the level of sunlight entering the room. In addition, this element of the interior is an excellent decoration of the room and blends well with many interior styles. However, the installation of these products requires certain skills. How to hang blinds plastic windows on one's own?

What are the types of blinds

These practical decorative items can be made from aluminium, plastic, fabric, wood and even thick paper. There are such types of blinds:

Roll or roller blinds. These items are made from fabric. They work on the principle of twisting the fabric onto the roller when lifted up. Mini-blinds are installed on the sash of the plastic window itself with the help of special fasteners. Decor can be mounted on straight or slanted windows. The blinds can be easily opened.

Vertical. In this case, the slats are arranged vertically and are connected by a ribbon or chain at the bottom. They are usually made from fabric or plastic. Vertical blinds are rarely mounted on a plastic window, because the elements of the mechanism are located very close to the glass, which makes their operation difficult. Most often, such products are installed on the upper slope, ceiling or above the window opening.

Horizontal. This option of blinds is most often used by designers when it is necessary to decorate a window opening in a practical and stylish way. The slats are arranged horizontally and are connected by a cord. For installation on a plastic window, special brackets are used.

Pleated blinds. Products are an accordion, which is hung on a window or attached to a cornice. Pleats are made of thick fabric or special paper.

Blinds "day-night"- this is a successful alternation of transparent and matte lamellas arranged horizontally. They are usually mounted on a window.

Roman curtains. One of the varieties of blinds, somewhat similar to pleated blinds. But when lowered, the blinds are a single piece without creases, as in the pleated version. Such elements are made of fabric, bamboo, straw.

There are also multiimpressive blinds, which are vertical plastic slats that form intricate patterns when layered on top of each other. There are also protective products of this category, which are mounted outside and are designed to protect the window from external manifestations, the sun, rain, wind, and intruders. Made from iron, plastic or wood.

How to choose the right model

First of all, you should focus on the design of the entire room. If the room is decorated, for example, in Provencal style, then mean vertical blinds of the "office" type will look out of place here. In this case, Roman blinds or pleated blinds with a suitable print would be the best option. But in a room decorated in the “minimal” style, the vertical model will look optimal.

A few more tips for choosing the best blinds:

We pay attention to where the products will be attached: in the window opening, on the wall above the frame, on the frame itself, under the ceiling, separately for each sash. Depending on this, we choose the type of fastening.
We carefully take measurements. It is worth remembering that the blinds placed behind the horse should be 10-15 cm wider than the window opening.
We select the type of blinds - vertical or horizontal. The first option will lengthen the space, and the second will visually enlarge the window.
Select texture and material. Here it is worth focusing on the style of the room and personal preferences.
correct color solution- the key to the success of the window decor. There are several generally accepted design rules - if the room is decorated in dark colors, then the blinds on the windows should be light and vice versa. Looks better in the kitchen horizontal blinds, and in the bedroom - vertical fabric.

After the desired version of the blinds is selected, it is necessary to proceed with their installation.

Do-it-yourself installation

Usually, special mounting materials are included with the product. We will consider the option of installing standard horizontal aluminum blinds. The whole process is divided into several stages:

Mounting markings. It must be carried out with an accuracy of one millimeter so that the blinds are symmetrical.
Drilling holes for self-tapping screws. At this stage, holes with a diameter of up to 3 mm are made at the marked places. It is enough to drill one for each corner.
Installation of the fastening structure on self-tapping screws.
Installation of blinds on fastening structures.

After that, you need to check the quality of work.

It happens that it is impossible to drill a plastic window due to the design features. In this case, you can use super-resistant glue. You just need to glue the mounting structure to plastic frame window. All further actions are performed in the same way as when drilling.

Also, as part of a gentle installation method, you can use special L-shaped plastic fasteners as in the photo below, which maintain the integrity of the profile and provide secure fastening blinds. They are hooked to the top of the window sash.

It is better to give preference to blinds manufactured by well-known trademarks so that the product lasts as long as possible. The adjustment mechanism should be as convenient as possible during operation, so it is important to take into account the features of the window opening and location window construction. Turning the window handle should not have a mechanical effect on the blinds, otherwise they will quickly fail.

It is necessary to regularly care for the blinds, avoiding their thorough contamination, as this can adversely affect not only the aesthetic qualities, but also render the mechanism of the product unusable.

Using our instructions, you can quickly and easily install blinds on plastic windows without resorting to the help of specialists.

New vertical blinds with fabric slats bought in a store or ordered via the Internet are not so difficult to hang on your own. You don't need any special skills to do this. It is enough to tune in to a working mood, find 2-3 free hours and provide yourself with everyone the right tools. And, of course, you will need detailed step by step guide how to install vertical blinds yourself. We invite you to familiarize yourself with it in this article.

Installation options and required tools

Depending on the size of the curtains, the window and the vision of the interior, vertical blinds with fabric slats can be hung in three ways:

into the window opening;
on the wall directly above the window;
on the ceiling (the latter method is especially relevant when blinds are used for space zoning).

Three main ways of attaching fabric vertical blinds

When the blinds are planned to be installed on the ceiling, you can make any vertical indent from the window. The same distance when mounted on a wall is limited by the length of the standard bracket, which is 150 cm.

If you need to make a wall offset longer than 150mm, use a bracket with an extension

We will need:

Perforator.
Drill for concrete 6-8 mm.
Self-tapping screws and dowels 6-8 mm.
Roulette or ruler.
Level.
Pencil.
Screwdriver.

In addition, if it becomes necessary to shorten the slats or reduce the overall width of the blinds, you will need scissors, thread, needles and a hacksaw.

To install vertical blinds, you really do not need to have special training. However, if any damage occurs during the procedure, then repair under warranty, exchange or return of the product will not be possible.

Operating procedure

Do-it-yourself installation of vertical blinds consists of the following steps:

Step 1

We lay out all the details on the desktop or on the floor and check whether everything is in place in accordance with the configuration.

The standard kit with blinds for plastic windows should include: 2 mounting brackets, self-tapping screws, a profile cornice, fabric slats with weights already inserted into them and a chain connecting them from below.

Step 2

Before attaching vertical blinds, you need to make sure that they are the right length. To do this, you need to attach one of the lamellas to the place where the cornice will be located. The distance from its lower edge to the window sill (or the floor, if you plan to hang the blinds to the floor) should be at least 1.5 -2 cm. Otherwise, the slats should be shortened. This procedure can also be done independently: pull out the weights, cut off the excess, hem the edges and insert the weights into place.

Step 3

We attach the cornice to the mounting plane, whether it be a ceiling, a wall or a window opening, set it according to the level and make marks from the right and left ends.

How the following steps are performed correctly depends on the installation method chosen:

If you chose to mount vertical blinds to the ceiling, step back from the previously marked marks 2.5-3 cm to the center and put down new marks.

If it is intended to attach the cornice for vertical blinds to the wall, the indent from the old marks towards the center should be 5.5-6 cm;

If the curtains attached to the cornice are installed in the window opening, it is not necessary to pre-mark the location of the ends of the cornice, and the final marks are set, stepping back from the outer edges of the opening to a depth of 2.5-3 cm.

After all the necessary marks are installed, you need to attach fasteners to them and put dots with a pencil in places where you will then drill holes. As a result, two labels should be obtained on the right and left. Before hanging the fasteners, make sure they are selected according to the sides (right and left).

If the width of the blinds is more than 1.6 m, 10-12 cm from the adjustment cord, then an additional middle mount should be provided.

Step 4

It's time to drill holes. Do not go deeper than 4-5 cm.

Step 5

We fasten the left and right fasteners with self-tapping screws to the appropriate places.

Step 6

Now you can insert the curtain rod into place and close it with fastener locks by turning the levers clockwise. If brackets are used as fasteners, the cornice must be screwed to them.

Step 7

Step 8

We attach the lower connecting chain to the weighting agents. First, we fix it on the outside of each lamella, then cut off the excess and do the same procedure on the inside.

All steps have been completed. We have completed the installation of vertical blinds. It remains only to test the operability of the mechanism and set the desired position of the slats at the moment. We not only saved a lot on installation, but also got satisfaction from the fact that we were able to accurately, quickly and correctly hang it with our own hands, without resorting to the help of professionals.

Do-it-yourself installation of vertical blinds video

[Rated: 3 average rating: 4.3]

Ten years ago, blinds were considered exclusively an office window decoration item. But recently, the lamellas have changed, new design options have appeared. As production materials, designers began to use bamboo, linden log cabins, cherries and fabrics. It has become fashionable to select models for the arrangement of houses, apartments and public spaces. Turning to a salon or a specialized store for help, you will receive competent advice from a sales assistant on installation, care and selection. In the event that you are going to install blinds on windows with your own hands, read our article in detail.

This must be known in advance before installation!

In order for the blinds to last a long time, try to carefully carry out the installation. If you understand the details in advance, the installation process will not take much time. The main thing is to take into account the models, the method of installation and take this into account in the assembly. If you mount window blinds directly to the wall, you need to make sure that its surface is perfectly flat.

Important point! When buying, be sure to check with the consultant whether all the parts of the mounting headset are included. There are times when a purchase additional fasteners inevitable. It is better to take care of this in advance.

Blinds can be attached in one of four ways:

to the ceiling;
to the wall;
inside the window opening;
for each division of the window.

Which option you choose doesn't matter. It all depends on the individual preferences of the client. Installed on double glazing various forms. But the method of fastening is selected individually. The sequence of steps is roughly the same, but there are some distinctive details.

Universal step-by-step actions for installing blinds

Many are sure that the models sell standard size and neglect the preliminary measurement of the window . We want to warn you: take the time to measure the height and width of the window opening.
Be sure to note that the length of the lamellas should be two centimeters shorter than the length of the window. If you provide for the option of attaching the structure to the wall, then the canvas fifteen centimeters to the right and left should cover the window.
Next, mark up the fasteners. Make sure that there are no difficulties with the operation of the mechanisms, and they will easily allow you to open the window.
Guided by the markings, attach the necessary parts to the base. Dowels and screws are screwed into the wall or ceiling. Sometimes directly into the double-glazed window. Next, a cornice is hung on them, which holds the structure.
As soon as you finish installing the blinds, check their mechanism.

Installation of blinds on plastic windows

Installing blinds on plastic windows is a common occurrence. Most modern double-glazed windows are made of plastic. This is a fragile material, so you need to work with it carefully. Now we will consider installation options where drilling is used:

We mount vertical blinds on plastic windows

This is one of the most common types. Functional features, wide color palette, ease of care and color combination attract customers. Because it is common in offices and public organizations. Installation of vertical blinds does not take much time.

It is necessary to mark up for fastening elements.
Next, attach the brackets and cornice.
Put runners on the cornice, attach lamellas to them in turn.
Attach weights to the control handle.
Check the construction.

Scheme of fastenings of vertical blinds
For detailed installation instructions for vertical blinds, watch the video below:

We mount horizontal blinds on plastic windows

In most cases, horizontal lamellas are attached to the wall. They are able to close the window opening completely, but at the same time they look aesthetically pleasing and do not “squeeze” the space of the room. There are cases when they are mounted to the window. Here, the details of the lamella are attached to each sash separately. The system for installing horizontal blinds does not differ from vertical options:

We mark places for fastening.
Attach brackets.
We put a cornice on the brackets.
Checking the length.
We check the installation and operation of the mechanism.

Mounting scheme

To make sure that the steps are correct, watch the installation video for horizontal models.

We mount blinds on plastic windows without drilling

If for some reason you do not want to drill a wall or a double-glazed window, you can use adhesive tape or special brackets. There are L-shaped brackets that are attached to the surface of the double-glazed window without drilling. They are easy to mount and dismantle thanks to a simple latch. But, they are attached only to those doors that open. To attach the brackets to a closed sash without drilling, use double-sided mounting tape.

Thus, with the help of L-shaped brackets and adhesive tape, you can maintain the integrity of the window profile. Mounting on adhesive tape is less reliable than others, but if you do not overload the structure, it will last a long time.

Mounting on brackets

We mount roller blinds on plastic windows

Roll models are installed in almost the same way as vertical ones. One of the most affordable options for mounting blinds is on two brackets that are attached using self-tapping screws.

We make markup for the details.
We fasten the brackets to the screws (at the same time, make sure that they are at the same level, otherwise the blinds will hang crookedly).
Next, we attach the cornice with the canvas.
Checking the construction.

Scheme of mounting roller blinds
For more details on the nuances of installing roll models, see this video:

Installation of blinds on wooden windows

Modern models are attached to wooden Euro-windows and old Soviet ones. It should be noted right away that when installing on old-style windows, you need to carefully take measurements.

Please note: the glazing bead on wooden Soviet windows should not protrude beyond the plane of the frame!

Suitable models for wooden windows: isolight, isotra, roll and rollite. These are universal models. They harmoniously fit into the interior design, regardless of its style. They are distinguished by a simple control mechanism and high performance.

One of the most complex installations on wooden double-glazed windows– fastening to each section. All necessary parts are included in the kit. Installation principles, as for plastic ones: using brackets or screws. If you are not afraid to make a hole in the double-glazed window, you will be satisfied with the result. With the help of fastening on screws, the structure will last a long operational period.

Mounting on brackets is considered less reliable, but it has a huge plus - no holes in the double-glazed window. When you want to remove the blinds, there will be no defects left on the window.

We install blinds on wooden windows

Let's take a closer look at the option using drilling and fastening with screws.

First you need to make a markup for each of the fasteners.
Make sure that the structure does not interfere with the opening of the window sashes.
Make holes for the screws. Install screws and dowels.
Attach a cornice to them.
Install another fastener at the control thread to save the structure from the accumulation of load in that area.
Attach runners and slats to the eaves.
Check the construction.

Using self-tapping screws, it is easier to attach the cornice to the window. Self-tapping screws will not bring harm window profile but be careful during installation. If you want to remove the slats after a while - no problem. After dismantling the structure, the holes are filled with special silicone glue white color- and not a single trace of the screws will remain.

Good to know! To begin with, it is better to drill holes according to the markup, and then mount the parts. Screwing in self-tapping screws individually is one of the reasons for the appearance of a crack. And this installation method guarantees the integrity of the plastic.

When the holes are prepared, the brackets are carefully screwed to them. Then install and close the eaves. The following steps are required:

Install the hook in the control mechanism.
Install the cane.
Attach the tip to the cane.
Fasten the thread with a knot.
Check the operation of the blinds.

Installing the lamella design is not difficult if you follow all the requirements and work carefully. Also read the installation instructions, which are necessarily attached to any model.

When a lot of light enters the room, this is fine, but sometimes it becomes too much, it interferes with work or rest. Fixing the situation will help fix the blinds, which are vertical, horizontal, roll. You can mount them yourself or resort to the help of professionals.

Installation of products is carried out to the wall, ceiling or directly into the opening. When purchasing blinds, you need to remember some rules.

First of all, you need to determine the exact parameters of the window - the width and height.
Decide where the control system will be located.
Find out the best type of fasteners for blinds.

Vertical models are usually mounted above the window opening, they can serve as curtains. Horizontal and rolled ones have more options - they are mounted on the upper slope, on the window, on each sash separately. At the same time, they are perfectly combined with any curtains, leaving the window sill free. Everyone must determine the product and installation options that are suitable for themselves.

Blinds are best ordered from the same company that made the windows.

The standard set of products usually includes detailed instructions, telling how to install it yourself.

Mounting methods

Fastening blinds to plastic windows directly depends on the design and functionality. Horizontal or roll products that cover only glass are attached directly to the frame. In this case, they can function simultaneously or independently of each other. To install vertical blinds on the ceiling, you need to attach a bracket.

The opening sash does not require drilling, as the brackets can be installed using special clips or double-sided tape. The most reliable and durable installation method is screws that are screwed in with a screwdriver. Be sure to keep in mind that the walls in many rooms are uneven, so determining how to install blinds mounts is one of the main factors in the successful completion of the process.

Related article: Methods and options for attaching shells

For a quality installation, you need brackets or brackets, which are usually included in the kit, as well as tools: a Phillips screwdriver, a hammer, a drill or a puncher, a plumb line, drills, tape measure.
Blinds are mounted on brackets according to a certain algorithm.

Make a markup at the intended installation site.
Hang the blind holder in a certain place: from the ceiling, sash, wall.
Turn the latches of the mechanism counterclockwise to the stop, insert the eaves, return the latches to their original position.

Installation of blinds on non-standard openings using drilling is different.

Brackets are installed at the top of the frame, and plastic corners are installed at the bottom.
In special bushings of the upper cornice, it is necessary to fix the cables.
Attach the cornice to the brackets.
Pass the cable through the holes in the slats.
Another pair of bushings must be inserted into the holes of the lower brackets, the cable should be passed through them and fixed.
Attach the handle to the structure.
Check system performance.

Installation of fasteners for blinds on inclined windows using screws is carried out in a similar way using drilling.

How to determine the size of the blinds?

When installing blinds on large openings, it is imperative to use intermediate elements, which will significantly increase the reliability of the structure. One bracket must be placed next to the control mechanism, since this area is most subject to stress. However, keep in mind that it should not interfere with the normal functioning of the system.

The width of the blinds installed on the sashes and opening with them must correspond to the parameters of the window plus three centimeters - one and a half on each side. Installation inside the opening implies a canvas four centimeters smaller than the width of the window - two centimeters on each side. For free functioning between the canvas and the upper edge of the opening, a gap is required.

Installation outside the window opening requires the use of a canvas that is ten centimeters larger than the width of the window - five on each side. The length is not less than the height of the window plus ten centimeters. If the window handle protrudes, the blinds are attached to the brackets. In this case, the canvas should exceed the width of the opening by 20 centimeters, which will more effectively darken the room.

Before installing blinds fasteners, it is necessary to check whether the chosen design will not interfere with the normal functioning of the shutters.

Vertical models are mainly attached to the ceiling. They consist of a cornice with a control mechanism and lamellas made of different materials: plastic, fabric, wood. After installing the eaves, it is necessary to attach the lamellas, while it is imperative to ensure that the seams on the plates are inside when the blinds are closed. After installing all the strips, it is necessary to attach a cord that activates the control mechanism, and so that it does not get tangled, a special plumb line included in the kit is put on it - it can be of any shape.

Related article: Standard and optimal sizes of doorways

The slats are easy to cut, so in case of errors in the calculation, the position can be easily corrected using simple tools. Modern manufacturers do their best to reduce the complexity of the process as much as possible. The main thing is to hang the strips correctly, since all windows have different parameters.

Sectional diagram of the design of horizontal blinds

How to choose?

Due to the simplicity of the design, blinds are made very quickly, and a variety of mounting methods - with or without drilling - allows you to install them on windows with both a rotary and a folding mode of operation. Now it is not necessary to drill the frame at all, and in case of dismantling, unattractive holes will not remain.
Modern manufacturers offer completely new installation methods:

holding magnets that allow the canvas to be parallel to the sash;
double sided tape;
brackets or clips that are attached to the sash.

Before installing the blinds, it is necessary to check the tightness of the window, make sure that there are no drafts that will shake the structure and interfere with its functioning.

The installation method depends on the design and size of the product. When choosing a model, be sure to consider functional purpose premises. During work, you must exercise maximum precision and care, as well as determine for yourself the most suitable product, how to install and operate it. It is important to remember that all blinds have strict geometric shapes, so even a slight misalignment during installation will spoil the appearance and make it difficult for the control mechanism to work.

Today, blinds are one of the most effective elements of decorating the interior space of a room. They gracefully regulate the flow of sunlight, and ease of use, affordable cost, a variety of models and materials used for production, allow them to remain relevant for more than a decade.

Another factor influencing popularity is easy care, which consists in periodically wiping the slats with a sponge dipped in soapy water. Once a year, the strips should be removed, rolled each into a roll and placed in water with detergent- the dirt will come off without any additional action. After rinsing them wet, hang them in a place where they will straighten out on their own. Certain types of blinds can only be dry-cleaned with a vacuum cleaner.

To save money, you can try to install blinds with your own hands. This work is not difficult, you just need to correctly mark the slope or frame, depending on where you need to fix the structure. Can be used different ways of installing such curtains, the choice is made on the basis of design features and dimensions.

Overview of types of curtains blinds

For different objects, the design of windows of a certain style and functionality is selected. Lamellas in the design can be arranged in different ways: vertically, horizontally.

Horizontal blinds

You can find different types of arrangement: pleated, inter-frame, attic, bamboo roller shutters, roll shutters belong to the same group. Main distinguishing feature- horizontal slats. They can have different thicknesses, widths and function differently. Such structures can be attached to a slope, a frame, they are also installed on top of a window block or inside a frame. It all depends on the size of the windows and the preferences of the owner of the home.

Construction of horizontal models

Classic horizontal blinds can be safely installed in premises with a variety of purposes: offices, private housing, production sites, administrative, retail and educational facilities. These are universal designs that are found in various shades.

Vertical blinds

Such curtains are usually mounted on top of windows, which is due to structural features: vertically oriented slats, most often made of woven material. There are two main types of such structures: floor-length or window sill-length.

General form and arrangement of vertical models

This is one of the reasons why it is customary to install such curtains in private houses, apartments and offices. Installation of blinds of this type is carried out on self-tapping screws. There is an alternative installation option - to the ceiling surface.

Roller blinds

Blinds for windows in this design combine two types of curtains: classic fabric and horizontal plastic. They are equipped with a continuous sheet of various types of material, close the double-glazed window, and, if necessary, rise, folding into a roll.

Roller blind device

Blinds of this type are fastened with self-tapping screws, as well as brackets. You can hang them in various interiors.

Mounting options

Horizontal and vertical curtains are characterized by individual design features. Based on this, various fastening methods have been developed:

Mount 1: For vertical structures

Fastening for vertical horizontal models to the wall

Vertical blinds can be mounted under the ceiling or over windows. Such blinds cannot be installed on plastic windows without drilling.

Mount 2: On a horizontal view

Structures with horizontally oriented slats in the standard version are attached directly to the window sashes, to the upper slope. Horizontal blinds without drilling can be placed in any design only on the sashes of the window unit.

G - can be mounted in the window opening, on the ceiling, wall, on the sashes of plastic windows

But the inter-frame analogue was created exclusively for installation in the space between the window frames. There are restrictions on installation to the upper slope, in particular, inter-frame and attic blinds are not attached in this way. If the installation is done by hand, it is imperative to take into account the design features of the products when choosing the installation method.

Preparation, measurements

Useful tools: screwdriver / screwdriver, tape measure, carpenter's pencil. In order for curtains to function as efficiently as possible, measurements must be taken correctly. The design should be symmetrical with respect to the double-glazed window.

If blinds without drilling are attached with adhesive tape, it is possible to correct errors. For analogues mounted on brackets and self-tapping screws, you need to markup as accurately as possible.

To fix vertical curtains, it is enough to measure the dimensions of the window opening, the distance between the attachment points and the length to the bottom edge of the curtain. This will allow you to correctly position the structure relative to the level of the floor and the window opening.

Horizontal blinds are often installed on the sashes, so the main measurements relate to the double-glazed window: height, width of each glass. To these values \u200b\u200badd 2 cm along the upper edge and bottom, 0.5 cm on the sides.

Installation of vertical blinds

Anyone can do the installation of such curtains with their own hands. If the blinds are short, they can be placed inside the window openings. Otherwise, the installation is carried out on the wall or under the ceiling.

For error-free fastening, a consistent instruction is given:

Step 1: Markup

The center point of the window opening is determined and correlated with the center of the blinds eaves. You need to make your own marks along the edges of the structure. The points for installing self-tapping screws are marked on both sides of the eaves closer to the center of the window block by about 5-6 mm.

Attach the cornice to the wall so that the center of the cornice coincides with the center of the window, and make marks along the edges.

Step 2: Look at the level

At the same time, it is necessary to assess whether the lamellas are correctly positioned. Their lower part should be 1-2 cm above the floor level. The same amount must be retreated when installing short curtains (up to the windowsill).

Step 3: Mounting brackets

Dowels are installed in do-it-yourself holes prepared in advance. Brackets are fixed, this is done using self-tapping screws. Further, special clips are installed on these elements.

Be careful with the puncher when drilling for the bracket fasteners, otherwise part of the wall may break off.

Step 4: Installation of slats and chains

A cornice is attached, into which it remains only to insert the runners and directly hang the vertical lamellas themselves on them. The final touch is the chain attachment.

The slats must be hung exactly in the order in which they are folded in the package. Otherwise, you can break the pattern of the blinds.

Installation of horizontal

Guided by the markings made earlier, you can do the fastening of a horizontal structure with your own hands. There is an instruction for this:

First you need to fix the upper fasteners. To do this, using a screwdriver, holes are prepared that will allow you to install the brackets using self-tapping screws.
Next, you need to hang the cornice, it is fastened until it clicks.
Holes for the lower fasteners (corners) are drilled taking into account the dimensions of the thread retainer connecting the lamellas. Typically, the design of blinds requires holes to be made on the sides of the glass. Then the latch, which is connected to the lamella web, can be easily inserted into the corners.

Do-it-yourself installation must be done with the utmost care, otherwise the blinds will not function correctly.

Methods for fastening roller blinds

When deciding how to install blinds on a window, the first task is to determine the appropriate method of fastening. The roll structure is mounted both on self-tapping screws and with the help of an adhesive (adhesive tape, liquid nails).

2 ways of fastening roller curtains on pvc window, on l-shaped brackets and on adhesive tape

In the first case, the installation technology of vertical curtains is taken as a basis, since roller blinds suggest the need for fastening only in the upper part of the structure. To "plant" the structure on the adhesive, the surface of the windows is cleaned and degreased. This will improve the adhesion of materials.

This option is suitable for double frames. Interframe installation plastic curtain- a complex process and implies the need to violate the integrity of the frame profile: holes are drilled (2 pcs.) To output the blinds control system (handle and cord).

They should be located at the top of the inner sash. Brackets are installed on the upper profile, the technology for mounting horizontal blinds is taken as a basis.

Basic tips for choosing:

Before you purchase a design, you need to clarify the composition of the kit, in particular, the presence of fasteners;
If the installation is easy to do on your own, then it is better to entrust the repair of curtains to the master;
Plastic is easier to care for;
It is not recommended to clean too often new design, as this will lead to rapid abrasion of the protective coating.

Detailed instructions:Do-it-yourself step-by-step installation (photo)

For example, horizontal blinds can be positioned as inside in any convenient way. However, the most popular option is on top of the sash. The interframe structure is more difficult to install, and the vertical counterpart can only be located above the window or under the ceiling due to its large dimensions.