Blockage in the sink in the kitchen folk remedies. Cleaning a blockage in the kitchen sink

Effective Methods

How to break through the sink and at the same time clean the sewer pipe? There are many proven methods. The time of action, the price of special funds and the amount of effort expended are their main differences. So that you can pick best method, I will present you the most effective.

Improvised means: 6 ways

In order to qualitatively clean the pipe and at the same time not damage its structure, you should first resort to the simplest methods.

The instructions presented in the table will tell you how to clean the sink in the kitchen with improvised means:

Image	Description
	Method 1. Hot water Flushing is suitable for plastic pipes hot water. Turn on the maximum pressure of hot water for 10 minutes.
	Method 2. Soda You can clean the drain with plenty of soda. Pour a pack of baking soda into the drain hole and let it sit for 30 minutes. Then drain some water.
	Method 3. Salt A dense cork of fat and food waste can be eliminated with ordinary table salt. Pour one large glass of salt into the drain and immediately pour the same amount of water.
	Method 4. Soda + salt Mix a glass of soda and a glass of salt in a container. Add 2 cups of water and mix well. Drain the resulting mixture into a drain. Wait 15 minutes and flush the blockage in the pipe with running water.
	Method 5. Soda + vinegar Pour a glass of baking soda into the drain. Pour 200 ml of vinegar on top. Plug the hole with a stopper and wait 20 minutes. Rinse with running water. With the help of soda and vinegar, you can even get rid of a dense old fatty plug.
	Method 6. Washing powder Pour 2 scoops of the powder (example in the photo) into the drain and turn on the water supply for 5 minutes. The loose blockage will disappear. Only free-flowing granular laundry detergent will do.

Mechanical cleaning: 3 methods

Now let's find out how to clean the sewer in the kitchen with special plumbing tools:

Image	Description
	Tool 1. Plunger How to use a plunger? The mechanism is quite simple: The drain hole is covered with a bowl of a plunger. Several pushes are made in the direction of the drain using the tool handle. The process is repeated 15–20 times. The plunger pulls up with effort. If there is water in the sink, then the plunger is placed on the drain so that the liquid completely covers the bowl.
	Tool 2. Plumbing cable Push the cable through the drain as far as possible. At some stage, you will feel a seal in the pipe - this is a blockage. Start scrolling the cable in parallel by raising and lowering it. As soon as you feel that the cable is free to slide through the pipes, the plug is removed. Instead of a special plumbing cable, you can use improvised tools of a similar design. For example, a thin country hose.
	Tool 3. Wrench and screwdriver Place an empty bucket under the sink. Using a wrench, remove the siphon (either unscrew the manhole cover or unscrew the sump). With any oblong tool (in our case, a screwdriver), scrape off the accumulated fat and food debris from the siphon. Replace the siphon.

Chemical cleaning: 2 products

You can also clear the blockage with the help of an aggressive household chemicals. Such funds are available in liquid and bulk form. Instructions on how to use them correctly:

Image	Description
	Remedy 1. Powder Pour all the powder into the drain. Leave on for 8-10 hours, preferably overnight. Drain some water and evaluate the result. Repeat if desired effect is not achieved. While the powder is inside the pipe, it is strictly forbidden to use the sink.
	Remedy 2: Clog Fluid Shake the contents of the container well. Pour about 250 ml of cleaner into the sink. Leave it like this for 4 hours. After a while, turn on the maximum water pressure for 5 minutes. If necessary, repeat the process from the beginning.

Traffic jam prevention

In order for kitchen plumbing to last as long as possible, try to adhere to the following recommendations:

• Do not pour cooking oil down the sink.
• Be sure to remove large food residues from dishes before washing.
• Cover the drain hole with a protective mesh.
• Clean your kitchen sink weekly with hot water or a plunger.

Outcome

Now you know everything effective ways unblocking a kitchen sink. By the way, all these methods are great for cleaning pipes in the bathroom. Try to follow the suggested recommendations so that your plumbing will last a very long time. The video in this article will give visual instructions. If you have questions or comments - I'm waiting for them in the comments.

built new house, modern plumbing equipment was installed, all communication systems were installed and life took a new turn. Everything works fine and there are no failures, but time passes and the first small problem appears on the horizon - at the most inopportune moment in the kitchen or in the bathroom, the sink clogged. We urgently need to find a way out of this situation.

We use a plunger

The simplest tool for clearing clogged drains in your home is called a plunger. It is in every house where there is a sewer system. The design of the tool is simple and looks like a small solid wooden stick with a rubber hemisphere at the end.

You need to do the following:

• Close the drain hole with a rag.
• Collect hot water, enough to completely dig the rubber bulb of the plunger.
• Start pumping the sink by rhythmically pressing and releasing the plunger.

Your manipulations will lead to a pressure drop inside the drain, which will contribute to the destruction of the resulting plug. It doesn't take long to work as a plunger. If you do everything right, the water will rush into the funnel and quickly leave through the pipe.

Note! Old sewer systems are made of cast iron pipes. Over the years, growths and roughness appeared inside the pipe. Perhaps the first time cleaning with a plunger will not give the desired result. Try again if you get a weak result.

If your actions with the plunger did not lead to anything, use another tool to clear the blockage in the sink.

We use a hydraulic pump

How can a conventional hydraulic pump help us? With it, you can create a strong flow of water directed towards the outlet of the sewer. Nothing works? Too strong a cork has formed and your efforts do not give any results.

Try using the pump in a different direction. Move the stopper out of place with the suction process. How to do it right? You need:

• Take a piece of cloth and wet it with water.
• Cover the overflow hole with a cloth.
• Draw water from the tap into the pump.
• Press the pump wort firmly against the drain hole.
• Start pumping the pump by releasing water into the pipe and sucking it out of the pipe again.

When a hydraulic pump is not at hand, you can try other alternative means.

We need not a simple cable, but a plumbing one that perfectly copes with the most difficult cases of drain blockage.

Note! If you have a sewer at home, be sure to purchase a plunger and a plumbing cable from the store. Let them be at your place and then you will not be afraid of problems with drain blockages.

On the wire twisted in a spiral, a spiral drill is attached on one side, and a strong handle is fixed on the other. The diameter of the wire may be different, but the length is the same and equals 3 meters.

Cleaning the drain with a cable is effective even in cases where the siphon is cleaned, but the water still does not leave. old metal pipes can only be cleaned using a rope. Let's try to implement our plan:

• Insert the end of the cable with a drill into the drain hole or auditor sewer pipe. Rotate the drill to the intended site of blockage.
• The cable must be simultaneously pushed into the pipe and twisted around its axis. It is not very convenient for one person to do this. Call someone for help.
• Keep the cable taut and gradually push it through the pipe.
• Faced with a traffic jam, twist the cable first in one direction and then in the other. At the same time, push the cable forward and pull it back.

When the cork is broken, you will feel the easy movement of the cable. Now start up the water to wash the plug into the sewer sump.

Let's try to clean the siphon

You may not need to use any drain cleaner if it turns out that the siphon is clogged. A curved pipe device is installed under the sink. There is always water at the bottom of the siphon. The siphon is designed to prevent the entry of sewer odors. When a fat plug with an admixture of solid waste forms in the lower part, the siphon stops working.

You will need a container to drain the water from the siphon when it is dismantled. Place a bowl or bucket under the sink and start disassembling:

• Unscrew the cap on the siphon.
• The bottle type siphon is very easy to disassemble. Large sump just turn to the side. Siphons of other types need to be completely disassembled with all nuts unscrewed.
• Pour the contents of the siphon into a container.
• Bend the wire with a hook and check the pipe outlet near the siphon on both sides.
• Rinse the siphon from fat deposits using detergents without chlorine content if a septic tank is installed on the site.

Note! To clean the horizontal pipe located after the siphon, also use a wire. To do this, a horizontal pipe must have a plug installed during the installation of the sewer.

In addition to mechanical methods for cleaning drain clogs, there are methods using chemicals or food additives used by women for cooking.

For the drain cleaning procedure, you need to prepare a bottle table vinegar and a pack of soda ash. Blockage removal procedure:

• Boil water in a kettle.
• Wipe the sink thoroughly with a dry cloth.
• Pour one hundred grams of baking soda into the drain hole of the sink. If necessary, push with a stick.
• Pour in one hundred grams of vinegar.
• After three minutes, pour into the drain hot water.
• Open the faucet so that the water goes into the drain without delay.

The cleaning procedure is completed.

To clean the blockage in metal and metal-plastic pipes, the Mole tool is used. There is universal means suitable for working with pipes of any material. "Mr. Muscle" or the "Tiret" tool will help you.

Note! Read the instructions for use carefully before using a chemical drain cleaner. Strictly follow all recommendations given by the manufacturer.

Better to do prevention

To avoid unpleasant situations with a clogged sink, periodically perform the following manipulations:

1. Regularly clean the siphon from grease and food debris. It is enough to leave the hot water on for just 30 seconds after each dishwashing.
2. Prepare a remedy from one part citric acid and two parts each of baking soda and salt. Pour the prepared product into the drain hole and pour two parts of boiling water there. Wash off with water after 5 minutes. Do this prophylaxis once every 7 days.
3. Sewer pipes from grease residues are perfectly washed with a large volume of hot water. After washing, to fix the result, work with a plunger.
4. Put a special grid on all plums. If you do not drain the leftovers of brewed coffee, tea and food down the sink, problems can be avoided.

Video: how to clear blockage

All people periodically encounter such an unpleasant everyday phenomenon as a blockage in pipes. This happens from time to time due to banal carelessness when using plumbing fixtures. Clogs can occur in the kitchen sink, if there is no special grate for garbage, or in the bathroom sink, where hair, soap bars and other small objects get caught.

They form dense deposits that obstruct the flow of water. And, since this problem causes a lot of inconvenience, it needs to be addressed quickly. You can call a plumber, but you won’t always find him right away, and calling him and his services are not cheap, so it’s best to study it yourself, in the sink.

A selection of the best ways

There are several ways to clean the sink, and to solve the blockage problem, you can try everything one by one until one of them gives a satisfactory result.

A blockage in the sink is the result of carelessness when using plumbing. Food waste, grease or hair, soap bars and other particles eventually clog the sink and water stops flowing out of it

Method # 1 - good old plunger

Most often, the siphon is clogged in the sink, which connects it to the sewer. It is designed so that the drained water does not immediately enter the sewer pipe from the sink, but is partially retained in it by means of a bend. The created water seal keeps the spread of unpleasant odors in the kitchen or bathroom. The simplest and affordable way to remove a clog in the sink is to use the old plunger familiar to everyone, which is in almost every home. It helps, as a rule, in most cases, therefore it is a very popular method of restoring the outflow of water in case of blockages.

The classic plunger consists of a rubber cap with a wooden handle. When it is pressed, the plugs formed in the sink are destroyed under the influence of mechanical pressure. To clean the sink with a plunger, it is first filled with hot water halfway and vigorously pressed against the drain, creating pressure drops. As a result, the blockage is destroyed, and the water can leave unhindered.

Plunger is the simplest plumbing tool that should be in every home. This is the easiest and most common way to clear blockages in the sink.

You may also find the instructions for clearing blockages in the sewer pipe useful:.

If the clogged sink is caused by small particles of food waste and debris, and if the clogging is small, a plunger will do the job. And if the particles are large and the blockage is quite old, a plunger may not be suitable for solving the problem. Then you have to resort to other cleaning options.

Method # 2 - chemicals

Unlike the previous version, there is no need to apply physical force. Instead of you, everything will be done by special chemical compositions designed to eliminate blockages in sinks and sewer pipes. They contain various alkalis and acids that dissolve inorganic and organic compounds. Stores currently offer various means to eliminate blockages, you just need to choose the right one. For metal and metal-plastic pipes, you should choose the "Mole" tool, and "Tiret", "Mr. Muscle", "Domestos" are suitable for any pipes.

The purchased product must be poured into the drain pipe (while wearing protective rubber gloves) and wait about five hours, and it is best to pour it overnight and pour boiling water there in the morning. This type of cleaning may not work after the first attempt. Therefore, actions with chemical agent must be repeated, which is definitely a minus this method fighting constipation. In any case, you should not refuse it, it is quite simple and cheap.

To eliminate blockages that have appeared, as well as to prevent their occurrence, special chemicals are used that dissolve mud deposits in pipes

Baking soda and vinegar essence are excellent folk remedies for clearing blockages in the sink. Gases and bubbles released as a result chemical reaction help to remove contaminants deposited on pipes

If the house did not have special chemicals at the right time, you can use baking soda and vinegar essence. A pack of soda is poured into the drain, a bottle of 70% essence is poured and after a while it is washed with hot water.

Method # 3 - disassemble and clean the siphon

When the plunger and dry cleaning have been tried, but the blockage still remains, you have to think about how to remove it, what other method to choose for this. There is a more radical option that will definitely help. This is disassembly and cleaning of the siphon. It is in it that most often accumulates debris that has passed through the grate, which closes the drain hole. This is facilitated by the curved shape of the pipe.

The surest way to eliminate blockages in the sink is to dismantle and clean the siphon, where mud deposits accumulate that prevent water from escaping.

The procedure is as follows:

• we dismantle the siphon, this is done easily, especially if the siphon is plastic, do not forget to put a bucket under it;
• unscrew the lower and upper retaining rings, disconnect the siphon from the pipe;
• remove all debris from the inside, rinse with hot water, degreasing agents;
• if the siphon is corrugated, then remove it, wrap one end of the corrugation with polyethylene, pour hot water and then tightly wrap the other end of the hose with foil. We straighten it and perform circular movements. Water cleans all the folds of the corrugation, washing away fatty deposits;
• carefully assemble the structure back, check how the situation has changed.

If the cause of the blockage lay in filling the siphon with debris, then after cleaning it, the water will leave instantly from the sink.

This procedure is much more difficult to perform with a cast-iron siphon, since it will take a long time to unscrew the rusted bolts, remove the cover and then clean the pipe with a cable. Therefore, for an easy solution to the blockage problem, it is better to install a modern plastic sewer.

Method # 4 - we clean the pipes with a plumbing cable

There are times when the siphon is already washed, but the water still slowly leaves. This means that the dirt is stuck somewhere far away in the sewer pipe. In this case, you will need a plumbing flexible cable. Let's figure out how to break through the formed garbage plug with a cable to eliminate the blockage in the sink.

A flexible plumbing cable with or without different nozzles will help break through the debris plug that has formed deep in the sewer pipe, which will eliminate the blockage in the sink

A plumbing cable is a three-meter wire wound in a spiral, one end of which looks like a spiral drill, and the other end ends with a handle. The thickness of the cable is different and is selected taking into account the width of the pipe. Here's how it's done:

• The end of the cable is pushed into the outlet pipe and directed towards the intended site of the blockage.
• At the same time, with the help of a handle, the cable is constantly twisted around the longitudinal axis.
• Having pushed the cable to the blockage, you should make several “back and forth” movements with it, which will help destroy mud plug. We move the cable carefully so as not to damage the surface of the pipe, especially if the communications are old and have not changed for a long time.
• We remove the cable and wash it from contamination.

After making sure that the blockage was cleaned, we wash the pipes with a large amount of hot alkaline solution.

How to prevent blockages?

Each of the above methods of removing blockages is good in its own way. But do not ignore home methods for preventing blockages, because by paying due attention to them, you can minimize the appearance of blockages in the sewer system:

1. In many cases, the cause of clogged sinks is the formation of a debris plug in the pipe. To prevent this from happening, you should try not to drain the remnants of food and fat from the dishes into the sink, but rather into the toilet.
2. In order to get as little debris as possible into the drain, it is necessary to install special metal meshes. At least once a week, it is advisable to rinse the sink drain (but not plastic) with boiling water, and pour it into the drain hole twice a month special means to remove blockages.
3. When replacing the sewer system, it is better to give preference to plastic drains and pipes. Elements made of this material are more durable and not subject to corrosion.

Annoying blockages can also form in the toilet. Our material contains methods and instructions that will help you solve this problem on your own:.

As we see, preventive measures to prevent blockages are quite simple, but following them will greatly help not to encounter an unpleasant situation of cleaning.

If the water in the sink began to drain slowly, you need to take steps to fix the problem before the liquid stops draining at all. Clogged kitchen sinks are common and can be dealt with in a variety of ways. To do this, it is not necessary to call a plumber - first you should ask how to clean the blockage in the sink in the kitchen at home. Usually everything you need is at hand, and the problem is removed in a matter of minutes. But it is of primary importance to find out why this happened - only in this case it will be possible to avoid a repetition of the situation.

Factors that lead to stagnant water in the sink can be divided into three main categories:

• Operational - they are provoked by the accumulation of food waste, fat masses, dirt in the pipes and sooner or later they are formed in every kitchen where they do not carry out appropriate prevention.
• Mechanical - appear due to the careless use of the sink, in particular, the release of large debris into the pipes, which prevents the flow of water.
• Technical - the reason is a malfunction of structural elements or improper installation of the sewage system, in which case only the replacement of communications will help.

The most common operational and mechanical causes. The material from which the pipes are made also matters: corrosion forms on metal elements, gradually increasing in volume and narrowing the diameter for water flow. plastic pipes more durable in this respect, but mechanical cleaning they are easier to damage.

Most often, blockages are provoked by a greasy coating that accumulates on the walls.

If the pipe is clogged, water does not go into the drain hole, and an unpleasant, putrid smell is felt from it - this means that it is necessary to break through the blockage in the sink. There are several effective methods solving this problem, therefore, it will not be difficult to choose the optimal one, taking into account the arsenal available at home.

Clogged kitchen sink - what to do?

First of all, it is necessary to stop using the product for its intended purpose: to wash dishes, vegetables and even hands in it. New volumes of water mixed with debris will only exacerbate the problem, and the liquid will have to be scooped out of the sink with one's own hands into some kind of container in order to gain access directly to the drain.

If the liquid begins to drain more slowly in the sink, the pipes should be filled with a large volume of water. Steel - with boiling water, since it will most effectively break up accumulations of litter and fat. Plastic pipes should not be poured with boiling water, as this can damage them, because just hot water is enough. You should open a powerful jet from the tap and pour for 20 minutes, while it is important to observe what is happening: if the hot water does not go away, and the amount of liquid in the bowl increases rapidly, the procedure is stopped. How to eliminate blockage in the sink at home in the kitchen if rinsing did not help?

Mechanical methods

Impact on the blockage with special equipment will allow you to mechanically push the plug or break it into small particles and, again, push it deeper into the drain or pull it out. To remove blockages in the kitchen, you can use the following tools:

• rubber plunger;
• metal cable;
• vacuum cleaner with air blowing function;

Plunger is a subject familiar to many. It is easy to use, no special strength is needed to use it - any housewife can easily handle it. The plunger with a rubber tip is pressed tightly against the drain hole and pressed so that the core "leaves" below. For effective cleaning by this method, it is necessary that there is water in the pipe - if it does not stagnate, but slowly, but still comes off, liquid must be poured in before using this device. The principle of operation of the plunger is simple: it creates a hydraulic column, under the influence of which the cork disintegrates.

Another rule is to close all holes that interfere with the formation of a vacuum. That is, if there is a side drain hole in the sink bowl, it is covered with a hand or a towel. Similarly, in the case when the sink consists of two parts: the second drain hole is covered to prevent air from entering the drain. The plunger is effective for recent pollution - it will not be able to remove very old, solid ones in most cases.

Flushing pipes under pressure will cope with almost any contamination

Metal cable is used by plumbers as effective remedy to eliminate blockages. It is a long, strong steel rope with a handle on one end and a brush or spiral on the other. The cable is placed in the sewer and slowly scrolls. If the movement is difficult, this means that the cable has encountered an obstacle. In this case, you can either continue to push it further to push the litter into the riser pipe, which a priori has a larger diameter, or, if the plug is close to the sink, it is pulled out. When cleaning the drain with a cable, it is periodically necessary to add water to the riser in order to wash off the contaminants released from the walls - this will help to avoid a new plug. The only drawback: if the cable moves too vigorously, plastic pipes can be damaged, so this method is preferable for metal communications.

Another option is a vacuum cleaner with a blowing function. It helps if the cork is fresh and not yet very dense. The nozzle of the vacuum cleaner is placed close to the drain hole and the vacuum cleaner is turned on for full power. The air flow will drive the cork further or break it into small fractions.

Mechanical methods cleaning is effective if food particles get into the pipe

And last option: if the reason for the obstructed outflow and the presence bad smell lies in the siphon, it must be cleaned manually - it will be more effective than working with a cable, plunger or vacuum cleaner. In this case, it is necessary to stock up on rags and lay household rags under the drain, as well as stock up on a bucket for liquid waste, since when the structure is untwisted, in any case there will be water in it that will flow onto the floor and stain the furniture. The siphon is cleaned by hand, washed thoroughly, then reinstalled. It is thanks to the siphon that there is no unpleasant sewer smell in the kitchen - it is a kind of barrier, since it retains water in itself and thus prevents direct odors from entering the apartment from the sewer.

Folk remedies

Among the many recipes on how to clean the sink from blockage at home, there are folk recipes - with the help of improvised means that can be found in almost every kitchen.

soda and vinegar

The universal and most common option is how to clean the sink without a plunger and other devices. In a hole in equal amounts soda is poured and vinegar is poured (for example, 150 g per 150 ml). The drain is closed with a rag so that the foam formed as a result of a chemical reaction does not come out, but is concentrated inside the pipe. After 10-15 minutes, the pipes are washed with plenty of hot water. The reaction that alkali and acid enter into effectively eliminates blockages and plaque on the walls. If you use hot potato broth instead of water, this will help eliminate bad smell. It is this method of all folk recipes that has the largest number positive feedback. But there are others.

Baking soda and vinegar are the best way to get rid of blockages in the siphon.

soda and salt

If you mix 100 g of salt and 200 g of soda, dissolve everything in 300 ml of warm water and pour it into the drain, after 10 minutes you can remove the blockage without special efforts using a plunger (the drain hole must be hermetically sealed with a cork or rags for the duration of the reaction).

"Alka-Seltzer"

An alternative, no less effective folk remedy is an Alka-Seltzer tablet or another anti-hangover drug that is soluble in water. It is thrown into the drain hole and poured with 1 glass of 6% vinegar, after 2 minutes the pipes are washed abundantly with hot water. In this case, in addition to eliminating the blockage, the bad smell is also removed.

Such a tool will cope well with a greasy coating and putrefactive odor.

Household chemicals

Another answer to the question: if the sink in the kitchen in the house is clogged, how to quickly clean it? In the departments of household chemicals, a wide range of pipe cleaning products is presented. All of them contain acids, which corrode deposits and deposits, therefore it is necessary to work with household chemicals to clean the sewers in the kitchen only with thick rubber gloves and, preferably, holding your breath or using respirators. Otherwise, caustic fumes can cause burns to the mucous membranes and respiratory tract.

All the tools that will help if the kitchen drain or drain in the bathroom is clogged are represented by two categories:

• powder - the sachet contains a portion necessary for a one-time cleaning of pipes.
• gel - completely ready for use, often more economical.

Household chemicals

In order for the product to work more effectively, hot water is lowered into the pipe (boiling water into the steel pipe) for 10-20 minutes, then the gel is poured or the powder is poured and poured warm water according to instructions. Maintain the interval specified by the manufacturer and rinse with plenty of cold water. You can wait from 15 minutes ("Domestos", "Mr. Muscle", "Tiret") to several hours ("Mole").

Almost every person thinks about how to clean the sink and the blockage formed in it, because often the water stops fully leaving the sink drain at the most inopportune moment. Sometimes there is not enough time to call a plumber and wait for him. Therefore, knowing several options for cleaning the sink from blockage, you can do it yourself. How exactly - it is written in our article.

Using a plunger to clean the sink

Most in a simple way how to clean the sink in the kitchen is to use a plunger, because given subject is available in almost every home and even more: a plunger is a tool that is known all over the world. It consists of:

• wooden handle;
• rubber cap, put on one end of the stick.

The plunger is fairly easy to use. For this:

1. They need to close the drain hole in the sink or sink;
2. Open, preferably hot, water;
3. After the water covers the rubber bulb from above, you should make a certain number of strokes with a plunger, and quite vigorously.
4. These actions will create drain pipe pressure drops that destroy the plug, which forms a blockage.
5. At the moment, you can raise the plunger.
6. And with successful actions, the water will, twisting into a funnel, go into the drain, which has been cleaned.

Pro tip:

In the event of a blockage in the drainpipe of the sink, you need to remember how to clean the sink without a plunger, using an empty carton of milk. It is necessary to insert the bag into the drain hole with a cut corner, and then press vigorously several times from above.

Hydraulic pump to remove blockage

Siphon cleaning

Siphon disassembly

The siphon is located directly under the drain hole of the sink or sink. It is a curved tube filled with water. Its main function is to isolate odors from the sewer. The siphon is clogged, as a rule, due to the formation of a plug of solid particles in the lowest part.

Before you clean the sink in the bathroom or in the kitchen, you should place a bucket under the sink so that water cannot spill on the floor. Then proceed to disassemble the siphon:

1. Using wrench, you need to unscrew the cover of the siphon cleaning hatch (usually all products have a standard principle).
2. At the bottle siphon, it is necessary to unscrew the large sump cup by hand.
3. If access to the inside is not provided for by the design itself, then the fixing nuts should be unscrewed and the entire siphon removed.
4. It is necessary to wait until the entire contents of the siphon drain into the bucket.
5. After that, bend the hook at the end of the wire segment and use it to check the pipe outlet area, which is located behind the siphon.
6. It is also necessary to check the other end of this pipe, as it may be blocked by leaves that have fallen off.
7. If, nevertheless, the siphon was removed, then before installation it is necessary to wash it with detergent.

Drill use

Quite often, a vertical pipe coming from the siphon is connected to a horizontal section of the sewerage branch. That is why in this connection it is definitely worth installing a cleaning plug to be able to clean the horizontal pipe. The cleaning process itself looks like this:

1. It is necessary to substitute a bucket under the sink.
2. Unscrew by hand and remove the plug.
3. Check the horizontal pipe for contamination with a wire that has a hook at the end.
4. If there is a cork in the pipe that sits tightly, then you need to use a special drill designed for cleaning pipes.
5. If there is no cleaning plug, then the siphon must be removed to be able to use the drill.

Cleaning the blockage with a rope

The presence of a plumbing cable will make it possible to clean even quite complex ones or in a sink. The cable will help even in the case when the plunger can not cope with the blockage. Therefore, having purchased such a product at home, you no longer have to think about how to clean the blockage in the sink.

The cable is a wire that is wound into a spiral, having a handle at one end, and a spiral drill at the other. Its length, as a rule, is close to 3 meters, but the diameter of the cable can be different.

You can use the cable even if cleaning the siphon also did not bring results. The cable is perfect for removing blockages in metal pipes.

Rope cleaning technology:

1. First, insert the end of the cable into the drain hole or outlet pipe and direct it to the intended direction of the blockage.
2. It's better to work together. So, one will constantly push the cable forward, but the other will create tension by twisting the cable around the longitudinal axis with the help of a handle.

Pro tip:

The cable must be tight! Since in the event of a weakening of the voltage, the cable may twist and be damaged, which will make it impossible to continue using it.

1. Twisting helps the cable to go around the joints and turns of the sewer pipes - screwing the cable into the contents of the sewer pipe.
2. When passing through a blockage or pushing the cable to its full length, several reciprocating movements should be made. Then remove the cable and clean it.

So, in case the sink is heavily clogged, what needs to be done is already known, and this procedure can be repeated if the result of the work is not satisfactory. It should be remembered that the diameter of the cable must necessarily be less than the diameter of the sewer pipe.

Preventive measures

Even with careful use of the sink, gradually accumulate in siphons and pipe bends:

• hair;
• food waste particles.

The absence of an unpleasant odor and the cleanliness of the pipes can be ensured by treatment with a chemical agent designed to clean the sewer, which is carried out regularly. Also, a tool designed to clear blockages must be used as soon as the water begins to drain more slowly, so that subsequently you have to think less about why the sink in the kitchen is clogged.

Pro tip:

In doing so, the manufacturer's instructions must be strictly observed in order to make the handling of the chemical harmless.

If, after cleaning the pipe outlet, the unpleasant smell still remains, then a small amount of antiseptic should be poured into the overflow hole of the sink.