How to choose a manual tile cutter - highlights. Porcelain tile cutter - manual or electric? How to choose a manual tile cutter for ceramic tiles

Tile is by far one of the most common finishing materials. For proper placement, use whole line tools, one of which is a tile cutter, without which laying tiles is simply impossible. This article will discuss the main characteristics that a manual tile cutter has: price, design differences, as well as the rules for handling the tool.

Manual type tile cutters are used not only for cutting tiles, but also for working with other materials (for example, glass or stone). The choice of one or another type of such a device primarily depends on the purpose.

Nuances of preparation various types surfaces. How to grout seams on tiles. Criteria for choosing floor tiles.

Electric tile cutters for porcelain stoneware operate on the principle of a "wet" cut. In turn, a “dry” cut is not suitable for working with this wear-resistant material. Of course, you can use a mechanical hand tool, but this is accompanied by some difficulties. For example, such models cannot cut off a piece of this material if its width is less than 3 cm. Because of this, the edges of the tile material will have to be processed by grinding.

There are other problems of a manual device that arise when working with porcelain stoneware:

• problematic fault clearly along the cut line;
• inability to cut diagonally;
• inability to use when crossing obstacles.

Porcelain stoneware cutting is carried out using the "wet" method

Electric models do a much better job when working with porcelain stoneware. They not only exclude dusting of the room, but also contribute to more accurate cuts of this material.

Manual tile cutter: price and overview of popular models

To date, there are several of the most popular devices that are distinguished by high performance, convenience and reliability. Among them there are both manual mechanical and manual electronic models.

The best manual tile cutters that function through mechanics:

• STAYER 3310-48;
• ZUBR EXPERT 33195-60;
• RUBI STAR-60-N.

The most popular manual models that operate on electrical energy include:

• STANLEY STSP125-B9;
• STURM TC-9811.

Note! Mechanical manual devices are perfect for working with tiles under normal conditions (when repairing an apartment). Electronic, in turn, are less common and even rarely used by experienced professionals. However, in some situations, their use is the only possible option.

Tile cutter from each brand has its own advantages and disadvantages. Therefore, to select the right product, it is recommended to carefully study the characteristics of each tile cutting device. The prices of manual professional tile cutters are quite high, but such devices are much more reliable and have a long service life.

Features of STAYER manual tile cutter

Manual tile cutters STAYER 3310-48 are manufactured by a German company in China. The peculiarity of this model is that it is excellent for performing curly cut. The size of such a device is 42 cm, which limits its capabilities. However, tile cutters of this brand are distinguished by the best indicators of functionality and low cost. The cutting depth of the STAYER device is 16 mm, which is more than enough for ordinary finishing works Oh.

This model has an additional element that allows you to make round holes in the tile - a "ballerina". Hole diameter varies from 30 to 80 mm. Also, STAYER 3310-48 is equipped with guide elements, which are necessary to perform a diagonal cut.

On sale, there are often devices from this company that do not meet the declared quality. Therefore, when buying a STAYER 3310-48 model, you need to pay attention not to purchase a defective fixture.

The advantage of buying this model is obvious if you find out how much the STAYER 3310-48 tile cutter costs. The average price of such devices is approximately 1750 rubles, which is very profitable from a financial point of view.

Manual tile cutter ZUBR EXPERT

Tile cutters of this domestic manufacturer are highly popular, as they are the best value for money. In comparison with more famous brands that produce these products, the ZUBR EXPERT 33195-60 device costs an order of magnitude cheaper.

BISON EXPERT has a length of 60 cm, which allows it to be used for cutting long tiles. Also, its design takes into account the use of a built-in ruler, which eliminates the need for preliminary marking.

The cutting depth of such a device reaches 30 mm, which is very high rate. ZUBR EXPERT 33195-60 is equipped with a carriage on bearings and has a comfortable handle. And also thanks to such a mechanical tile cutter, it is possible to cut the tile material at an angle.

Of the shortcomings of this model, only one can be noted, namely: the presence of a backlash (gap) in the roller. Such a minus can affect the accuracy of the cut. The cost of the domestic device ZUBR EXPERT is approximately 3350 rubles.

RUBI STAR manual tile cutter: model features

RUBI tile cutters are manufactured by a well-known Spanish company and are renowned for their best quality. The RUBI STAR-60-N model is one of the best examples of this manufacturer. In most cases, these tile cutters are used by professional tilers.

Useful information! The base of the RUBI manual tile cutter is distinguished by good strength characteristics and high rigidity. And well-fixed guide elements exclude the possibility of free movement of the cutter when cutting. Thanks to this, the cut almost always turns out to be perfectly even.

The RUBI STAR-60-N has a set of interchangeable bits for different types tiles. Their thickness varies from 6 to 10 mm. It is also worth mentioning that this model is equipped with special plastic wings for additional fixation of tiles.

Of the shortcomings, only one can be noted - a rather small depth of cut, which is a maximum of 12 mm. The average cost of a RUBI tile cutter is 7,500 rubles.

Electric manual tile cutter STANLEY

The device is manufactured by a US company. The main difference between the STANLEY STSP125-B9 tile cutter is its low weight. The engine of this unit is slightly more powerful than the competition, which is a small plus.

Separately, it should be said that the STANLEY STSP125-B9 electronic model has a large cutting depth (41 mm). Thanks to this, it becomes possible to work not only with conventional facing materials, but also with rather massive slabs.

STANLEY STSP125-B9 can be used in both dry and wet cutting conditions. The price of such professional electronic devices averages 3500 rubles.

Electronic manual tile cutter STURM

The STURM models are manufactured by a Chinese company and feature better functionality than the competition. Model STURM TC-9811 is a very compact device, which greatly increases its versatility and operational scope.

The main feature of the tool is that it is equipped with a system that cools the disk by means of water supply. Due to this, the possibility of overheating of the tile and its damage is excluded. The cut made by such a tile cutter is almost perfect.

Among other advantages of the TC-9811, it can be noted that its device allows you to make cuts at an angle of 45 °. And also it can be found and non-standard application (as a strobe apparatus). Additional equipment for this electronic tile cutter includes a second diamond blade and spare brushes. The average cost of the device is approximately 2600 rubles.

A device for cutting tiles can be purchased at a specialized store, a construction hypermarket, or ordered on the Internet. In the latter case, there is the possibility of buying defective products, so it is recommended to be careful and not order tile cutters from dubious sites.

How to choose a manual tile cutter? There is a range important factors, which you should pay attention to when choosing a device for cutting facing materials. Let's consider each of them in more detail.

Appearance. The visual component is important when choosing a tile cutter. Special attention must be paid to the base, which must be of high quality and durable. Its thickness should be sufficient for the convenience of working with the device.

Useful information! When choosing a tile cutter, it is worth examining the lever and guide elements. For example, when cutting porcelain stoneware, great efforts are required, so the tile cutter in this case must have a long handle.

Length working area tile cutter. When choosing a tile cutter, it is necessary to take into account the length of the diagonal of the tile with which to work. It is desirable that the length of the working area is not less than the diagonal of the facing unit.

Carriage travel along guide elements. During operation of the carriage, its movement must be smooth. In no case should it get stuck when moving or sway due to play. Bearings can be included in its design, which is a definite plus.

Cutting roller. The roller should not have play, and its movements should be smooth. In the event of failure, the replacement of this element should not be accompanied by difficulties.

How to choose a tile cutter depending on the purpose? If you need a device to work reusable, then you should think about purchasing a manual professional tile cutter. Buying such a device is not difficult, and it can last more than one year. For a one-time use, a less expensive model made in China is suitable. And for trimming 1-2 tiles, you can even take an amateur model in the form of a pencil or wire cutters.

There are many materials on the Internet that will help answer the question of which manual tile cutter is better to buy. Reviews on relevant websites will also help you decide on the choice of tool.

How to use a manual tile cutter

In order to answer the question of how to work with a manual tile cutter, it is necessary to study in detail the algorithm of actions. Consider the process of cutting tiles in stages:

1. First of all, you need to determine the size of the trim. In this case, it is very important to take into account the gaps near the wall and the seams.
2. Guided by previously determined measurements, you need to place the ceramic tile on the frame of the cutting device.
3. Next, you need to fit and align the tiles along special lines.
4. While holding the tile, it is necessary to draw a cutting element along the cut line.
5. At the end, you need to lower the legs of the separator on the handle and press (with force) on the lever.

Knowing how to cut tiles with a manual tile cutter and performing all of the above steps in the right sequence, cutting the material will happen without difficulty. In this way, trimmings up to 1 cm wide can be made.

The tile cutter is a functional construction tool that can greatly simplify the work of laying ceramic tiles. For more effective work with the device, it is recommended to familiarize yourself with various instructions on the topic of how to work with manual tile cutters. Videos on this topic can also be easily found on the Internet.

How to cut tiles with a manual tile cutter: video

The tips that will be given in this article are simple and not intricate, but in any case they will insure you against an unsuccessful purchase. After all, the more you know about the tool, its features and subtleties, the easier it will be for you to choose it. We read and shake on the mustache. So, word to the master!

Tile cutter with a "ballerina" - for beauty or benefit

A tile cutter is a tool that is designed to cut tiles up to 1.5 cm thick. To cut wall tiles, use a special tile cutter, no more than 40 cm in length. Some tile cutters have a "ballerina", which is designed to cut holes. In principle, at first glance, this is a rather useful and necessary thing, but do not rush to rejoice. As experience shows, on cheap tiles, this "ballerina" practically does not perform its functions properly. Experienced tilers claim that even the design of this “bonus” has not been fully thought out. And if you need a tile cutter with a ballerina, then buy professional tile cutters from well-known manufacturers.

It is worth mentioning that all tile cutters, without exception, have a small drawback. It lies in the fact that they do not cut off from the edges of the tile, for example - 4-5mm. In this case, a water tile cutter, grinder or special wire cutters are usually used.

The choice of a manual tile cutter is a crucial moment in which there are no trifles. So, let's find out what exactly you need to pay attention to when choosing a good, high-quality tile cutter. And which manual tile cutter to choose is up to you.

"Manual tile cutter" - video on this topic

How to choose a manual tile cutter - highlights

frame strength

Remember that a weak frame will not be able to cope even with an average amount of work, and will fail very quickly. Pay attention to the thickness of the metal frame. The rigidity of the base is the first sign of a quality tile cutter. Otherwise, vibration may occur when splitting the tile, and it will simply deteriorate. The stronger the handle, the more powerful the lever. This is especially important if you are working with porcelain stoneware.

Tool length

It would seem that the length is the most harmless part. But it also has its own nuances. You should not buy a short tile cutter. If you take for yourself - do not save money. Pay a little more, and you will have a universal tile cutter that is suitable for both wall and floor tiles. Also, a capacious tile cutter will help out a lot when laying tiles diagonally. There is another way - to cut with a grinder. But there will be a lot of dust in the room. If a renovation is in progress in a new building, then it's okay, but if in a residential building? Think about it ahead of time.

Smooth running

Almost all high-quality tile cutters have special bearings that set the necessary smoothness. But if you buy a tile cutter without bearings, be careful, because you can only check it in operation, or by trusting a well-known brand.

Be sure to test the tile cutter, cut a couple of tiles. The sliding should be smooth, the tile should break only along the drawn line.

Characteristics of a manual tile cutter

The main part of the manual tile cutter is a cutting roller made of hard alloy steel. When it becomes dull, the quality of the cut drops significantly. The roller is not sharpened, it can only be replaced. Many tile cutters are equipped with a swivel ruler that can be used to cut tiles at an angle.

High-quality branded tile cutters have additional settings that are needed to adjust the thickness of the material. Thanks to this, it is possible to limit the stroke of the cleaving legs, which in turn prevents the edge from crumbling even when cutting diagonally. However, a good manual tile cutter is very expensive, so we will not consider how much a manual tile cutter of well-known brands costs.

High-quality tile cutters from well-known manufacturers

For a manual tile cutter, the price may differ not only because of the quality, because the brand plays a rather large role, which directly affects the price. Consider the most famous manufacturers of tile cutters.

Tile cutters from Germans Boada, S.A., RUBI

In 1951, some Boada brothers invented manual machine for cutting mosaics. From that moment the company Germans Boada originates. This brand new tool, called RUBI, was the first step in the development of the company. The main focus of the company is on the production of equipment for laying ceramics and other materials. All structures of the enterprise are equipped the latest technologies and are constantly modernized, which allows not only to produce high-quality products, but also to process and send orders on time.

RUBI manual tile cutter TM-70

The tile cutter has an adjustable high power divider. Ideal for both ceramic tiles and porcelain stoneware (including extrusion). The separator is fixed from 6 to 21mm. The tile cutter has all-steel chrome-plated guides, which once again confirms its high quality. There is a side stop for re-cutting at right angles and 45. Roller cutters - 8-22mm. Great for large format ceramics.

The price range for the Ruby tile cutter is quite large - there are relatively cheap models (manual) for a couple of thousand, and there are also professional (electric) ones - 12-25,000 rubles.

Matrix manual cutters

Matrix is ​​known as a manufacturer of professional construction equipment. One of the main directions of the company is the manufacture and sale of manual and electric tile cutters. One of the popular models (despite its simplicity) is the Matrix 600 and 500mm manual rail tile cutter. Let's consider the first option.

Rail tile cutter Matrix 600mm

As the name suggests, the cut length of the tile cutter is 600mm, and there is only one guide rail. The rail is an I-beam steel alloy. The tile cutter has a ball-bearing mechanism that drives the tool carriage, covered on both sides by a rail. The clamping girth is adjusted with special bolts, due to which not only the complete absence of play is achieved, but also maximum stability during cutting. Good adhesion of the ball to the rail is achieved thanks to a special coating, which also prevents slippage of the carriage during operation. Particular attention should be paid to the very easy stroke of the handle, this is, so to speak, a "trick" of Matrix tile cutters. The aluminum bed facilitates work and gives mobility to the tool.

Sigma tile cutters

Sigma began its history in 1994, and over this long period has established itself quite well as a supplier of quality materials. The main activity is the sale of a wide range of tools to Europe and the CIS, where Sigma is a strong player.

Manual professional tile cutter 3CM (MAX series - 72 cm) Sigma

Very powerful manual tile cutter Sigma, cutting power is 1150kg. This model allows you to cut even the most difficult materials, thick, embossed, etc. The special separator handle is equipped with a ball bearing and a shock-absorbing effect (this distinguishing feature of all Sigma tile cutters) allows you to combine high power with smoothness and smoothness. For added convenience, this model has a base wing made of galvanized steel. The ruler is located near the tiler, which is very convenient. The centered ruler is equipped with a quick locking system at any angle.

Tile cutter 3CM (MAX series - 72 cm) Sigma for true connoisseurs of comfort

Manual Tile Cutter Montolit

MONTOLIT is engaged in the production of tile cutters for cutting tiles and stone. There are several series of manual MONTOLIT tile cutters, which differ in the degree of technological complexity.

Manual tile cutter MONTOLIT 26PB

Manual tile cutters Montolit are designed for professional tilers, they are able to perform a large amount of work on cutting tiles. different sizes and strength. The rigid design allows for perfect cutting without the slightest deviation. Tile cutters are designed in such a way that even when working with very durable ceramics, the cutter makes a deep even cut, which gives an ideal chipping quality on tiles up to 25 mm thick. Additional thickness adjustment options allow you to adjust the stroke of the legs, which ensures that there is no crumbling.

Tile cutters Stayer

The trademark "Stayer" belongs to the Kraftool company, which since 1999 has gained great popularity in the European and Russian market construction equipment. The German quality of Kraftool does not require confirmation. If you need a tile cutter that combines modern design, ergonomics and the highest quality - this is a must-have manual stayer tile cutter.

Manual tile cutter Stayer 3310-60

Reinforced tile cutter Stayer 3310-60, has a circular cutter. The tile cutter is designed for straight cutting of ceramic floor tiles with a maximum thickness of 15mm. This type of tile cutter is capable of making circular cuts with a diameter of 30-80mm, it is also equipped with an extension ruler and a square (45 and 90 degrees).

Manual tile cutter BASIC PLUS 60

The BASIC PLUS 60 tile cutter with case is a high-quality professional tool for finishing work. Very often the master has to adjust the tiles to certain conditions, in this case a professional manual tile cutter BASIC PLUS 60 + case will always help.

An aluminum frame makes cutting tiles easier, and two nickel-plated guides with a handle make the job quicker and easier. The guides have increased rigidity, which gives an oval profile. Also, the guides are chrome-plated, which significantly reduces friction. The tile cutter carriage is made of polymer. This material does not require lubrication, does not oxidize or clog. The long handle allows you to reduce the effort for cutting.

The process of laying ceramic granite would not be possible without trimming the tiles in place. This is especially true when laying out a complex pattern. But it's not plywood, and you can't cut it that easily. Its hardness can reach nine points out of the maximum ten.

There are several technologies for cutting porcelain tiles, for example, a special device is used - a manual tile cutter for porcelain tiles. The choice of a specific method and the appropriate tool depends mainly on two parameters:

• tile quality:
• cut type.

No matter how carefully the lining is selected and done, there is still a section along the walls that is not a multiple of the tile. So it needs to be cut. A similar situation develops when bypassing communications. Obviously, to carry out these works, a tile cutter for porcelain stoneware is needed, how to choose it is another question.

Mechanical machine for cutting porcelain stoneware: what is it

A manual porcelain tile cutter is used to cut tiles in a straight line.

There are also tools equipped with a special element, a "ballerina", with which round holes are cut.

With its rather low cost, it is very convenient and provides good quality. Its design is quite simple - it is a base platform on which guide tubes are fixed. It is along them that the moving element moves. All tools of this type are equipped with a device with which the tile is broken at the cutting point.

The cutting element of the tool is a carbide or diamond roller - exactly the same as that of a glass cutter, only larger. The roller is fixed in a special holder moving along the guides. A special base on which all these elements are assembled is firmly installed on the surface when performing work.

A manual tile cutter is more suitable for household work and small volumes. For most models, there are also restrictions on the thickness of the cut tiles - no more than 12 mm. The cutting quality is quite high, although sometimes the cutting area will need to be further processed.

When choosing a tile cutter, adhere to general rule A: The thickness of the tile and the diameter of the cutting roller must match each other: the greater the thickness of the porcelain tile, the more powerful the diameter must be.

How to cut with a hand tool

The movement of the manual tile cutter along the guides is provided by bearings or cylinders. After a long period of storage, it is necessary to check the movement of the mechanism and the sharpness of the roller:

• worn "diamond" roller is replaced,
• tighten its fastenings, if, when pulling along the rods, the mechanism wedges or flops, replace bearings, clean the guides, etc.,
• the roller can be eased by dropping a drop of oil.

The process of cutting porcelain stoneware

After making accurate measurements, marks are made on a solid tile, then a line is drawn with a marker or pencil, according to the measurements. The tile is placed on the base of the tile cutter and set in such a way that the roller runs exactly along the line from beginning to end. The tile during cutting should not move, therefore, in the process of work, it is fixed by hand. The other is to raise the handle of the tool and lower it.

Please note that the paws should not rest against the tile, while the diamond roller should touch its surface.

The roller is brought to the edge of porcelain stoneware and, pressing the handle, is evenly drawn to the other edge: the more evenly the roller is drawn, the clearer and more uniform the incision will be.

Try to make it in one go, as multiple cuts along the same line affect the quality of the cut.

The next step is to return the tile to its previous position, raise the handle of the tile cutter and put the paws with an emphasis in the middle of the cut, breaking with their help. Gradually increasing the effort, press the handle until the porcelain tile breaks. You can remove a small excess from the tile using wire cutters or pliers, biting off or breaking off along the cut line.

A poor-quality cut can be corrected by grinding. To do this, put a cutting disc on the stone grinder. Draw a thin line parallel to the cut with a pencil or marker, then grind it. Of course, if the coating is supposed to be hidden in the future, say, under a baseboard, the quality of the cut is not so important.

Dry cutting: grinder (angle grinder)

A dry cutter is a disk for cutting porcelain stoneware that does not have slots, with a “diamond” coating, sometimes solid. The direction of rotation of the dry cutter must be aligned with the direction in which the grinder mechanism rotates. This not only improves the quality of the cut, but also reduces the risk of injury.

With skillful and careful use, a dry cutter can give the same results as a tile cutter. In this case, the tile is sawn off not along the line, but with a margin of 2-3 mm. At the same time, chips and cracks may remain on its front surface. This cut quality can be accepted if it is not visible. The number of chips can be reduced by making a cut in one pass - each new pass increases the number and size of cracks and chips. The left stock is polished around the stone.

The main advantage of cutting with a grinder is the ability to cut straight, as well as curvilinear. In this way, various geometric shapes are obtained. However, this process is technologically more complex, and it also requires maximum care and the strictest observance of safety regulations. To the disadvantages of cutting with a disc, you can add dust and debris, which are formed in large quantities during operation.

Wet cutting: electric tile cutter

How to cut ceramic granite, if you need to get a very high-quality and clean cut. If you work with a dry cutter or a mechanical tile cutter, it is not always possible to achieve such a high quality, and besides, it takes too much time. For such work, an electric tile cutter is most suitable. Its design consists of a table and a cutting element, which is driven by an electric motor. On some models, the table for fixing tiles is stationary, and cutting is carried out by the advancement of the cutting element. In others, on the contrary, the cutting part of the tool is stationary, and cutting occurs due to the advancement of the table.

For quality and safe work This tool requires constant cooling: the material being cut and the cutting disc must be constantly cooled. In most cases, electric ones use water cooling.

The process of laying porcelain stoneware is impossible without trimming the tiles in place. This is especially true for the case when a complex drawing is laid out. However, porcelain stoneware is not plywood, you can’t cut it so easily, it is distinguished by increased hardness (9 out of the maximum 10 points). To cut the desired piece, use a special tool - a tile cutter for porcelain stoneware.

The name already speaks about the purpose of such a tool. If ordinary tiles (ceramic) can be cut with a simple glass cutter, then for porcelain stoneware this operation takes place with great difficulty. There are several types of tile cutters for porcelain stoneware:

1. manual tile cutter, most often used for small amounts of work;
2. electric tile cutter.

Hand cutter

This tool uses a carbide or diamond wheel fixed in a special holder that moves along the guides. All this is assembled on a special base, firmly installed on the surface during work. Manual tile cutter for porcelain stoneware is most often used in everyday life and for small amounts of work, as well as in cases where the thickness of the cut tile does not exceed 12 mm, although this is not the limit for individual models.

There is a simple rule - the thicker the cut tile, the larger the cutting roller should be. By and large, a tile cutter for porcelain stoneware is the same glass cutter, only slightly modified.

The resulting cut quality is quite high, although sometimes additional processing of the cutting site is required. The usual use of such a tool is cutting in a straight line, but some models allow you to cut tiles at an angle, and are also equipped with a special ballerina designed to cut round holes. All tile cutters are equipped with a device for breaking tiles at the cutting point.

There are a lot of models of tile cutters for which porcelain stoneware processing is available (RUBI, Montolit, Stayer, etc.). However General characteristics and the capabilities of most models usually coincide. How porcelain stoneware is cut can be seen in the video:

Electric tile cutter

An electric tile cutter for porcelain stoneware is a more advanced device than a manual one. Some of the examples of electric tile cutters are shown in the photos below. Depending on the location of the engine, a tile cutter is distinguished:

• top position;
• with bottom position.

In addition, the difference between different models caused by the power of the motor and the diameter of the wheel being used. In machines of this type, conventional cutting is used for cutting. saw blade, but the diamond blade for porcelain stoneware is best suited, providing high accuracy, good cutting quality and the absence of chips at the cut boundary.

As well as manual tile cutters, various electrical models quite a lot, they differ, in addition to what has already been noted, in dimensions, dimensions of the desktop, depth of cut.

To ensure a long service life of the disc and the machine, as well as to ensure high-quality cutting of tiles, the machine is equipped with a tray with water, which serves to cool the disc. In the case when the water used to cool the disc and the cutting point comes from above, the flowing water is collected in such a pan.

It is this approach that is the answer to the usual question - how to cut porcelain stoneware without chipping. The use of high-quality, unworn tools and the cooling of the tool and material in the process of work will ensure the best cut of porcelain stoneware tiles. How to work on such a machine can be seen in the video:

What else can cut porcelain stoneware?

Using a tile cutter, manual or electric, is not the only option that allows you to cut porcelain stoneware. Trying to find how to cut porcelain stoneware, do not forget about the usual grinder. To perform such cutting, no additional costs and preparation are required.

True, the cutting quality is much worse than when using a special tool, chips and irregularities appear on the edges, which, by the way, can be later corrected by grinding with the same grinder.

In addition, a lot of dust is released during the work and it is necessary to use a mask or respirator. So, to ensure comfortable conditions work and its high-quality performance, it is best to use a machine for cutting porcelain stoneware, buying it will not be a big problem.

Sometimes when laying porcelain stoneware, there is a need for specific types of cutting, for example, when laying porcelain stoneware mosaics, using thick slabs and cutting along complex contours (shape cutting). In this case, you can resort to the help of special organizations that provide services for cutting porcelain stoneware. They use special equipment capable of waterjet or laser cutting.

The services of such companies can be used if you need to cut just a few pieces of tiles. But if you have a fairly large amount of work to do and ordinary tiles are laid, then it is best to buy a porcelain stoneware cutting machine, its price is quite affordable and is an insignificant part compared to the total cost of porcelain stoneware cladding.

Despite the high hardness, porcelain stoneware is quite successfully subjected to various processing.

For this, both a special tool is used - tile cutters, manual and electric, as well as an ordinary grinder with a set of discs. Perform if necessary artistic cutting, you can contact organizations that provide relevant services.