Vodomet pumps are submersible multi-stage devices of the Russian company Dzhileks, designed to provide autonomous water supply to houses and watering plots.
Production is located in Klimovsk, Moscow region.
Equipment Features
The equipment of this brand is a range of household appliances of various sizes and different capacities, so you can choose a model that will provide the required amount of water.
Advantages of submersible pumps:
- work quietly;
- are small in size;
- do not "trouble up" water, unlike vibration ones;
- small size;
- low price;
- high efficiency;
- reviews of submersible pumps Vodomet are mostly positive - there are practically no negative ones, which is also a significant indicator;
- the ability to work in water with a significant amount of sand or clay (from 2 to 5 kg / m 3).
Water pumps Vodomet, designed specifically for Russian operating conditions, are of two types:
- wells;
- borehole (deep).
What are their differences?
Pumps for wells Dzhileks Vodomet are designed for use in relatively shallow wells (8-10 m), tanks or open water.
A prerequisite for the operation of such a pump is the sufficient width of the reservoir so that not only the pump, but also the float switch can fit there.
The water cannon pump for the well has obvious benefits before the well:
- larger ratio useful action, which means, ceteris paribus, the submersible water jet pump for wells will have a greater performance than the water jet pump for a well;
- less sensitivity to dirty, "sandy" water;
- the presence of a simple float switch, thanks to which there is no need to install protection against "dry" operation;
- low price - from 9,000 to 13,000 rubles.
The submersible water pump for wells is smaller in size and is designed for extracting water from narrow (from 100 mm) and deep wells, lifting water from a considerable depth (usually the depth of wells is from 40 m).
The price of pumps for water jet wells is slightly higher than the price of well pumps - from 10,000 to 24,000 rubles.
About manufacturer's models
Submersible pumps Vodomet are available in several modifications, differing in power and other technical characteristics. Pumps for wells are marked as follows: pump Vodomet 55/35A, 55/50A, 55/75A, 150/30A, 150/45A, 150/60A.
Here, the letter "A" indicates that the pump is equipped with an automatic float switch.
Well pumps have the following designations: Water jet pump 40/50, 40/75, 60/32, 55/35, 55/50, 55/75, 55/90, 110/110, 115/115.
- The first number indicates the pump's maximum outlet flow (l/min). This flow rate is determined with open taps and no resistance to water movement.
- The second number is the maximum head (m), which develops the device with fully closed taps.
For example, the submersible pump Vodomet 60/32 delivers up to 60 liters of water per minute with a free spout, and when the water consumption taps are closed, it can create a pressure of up to 32 m. This unit costs almost 6800 rubles.
Based on the technical characteristics, we can say that:
- Water jet pumps with a maximum possible flow rate of 60 l/min will work most efficiently in water supply sources with a small flow rate (the amount of water that a source can give per unit time). In this case, the flow rate of the source must be no less than the performance of the pump, otherwise the pump may pump out all the water in the well (well), and begin to draw in silt or work “dry”, which can lead to its breakdown.In real conditions, a submersible pump Vodomet 60/52 at a price of about 8000 r can provide a consumption of 35-40 l / min (more than 2 m 3 / hour) - up to 4 consumer taps at the same time. The submersible pump Vodomet 60/72 at the price of 10,000 r will give a stronger pressure at the same flow rate. Thanks to this, with the help of such a pump it is possible to move water over a greater distance.
- Pumps Vodomet with the highest flow rate of 115 l / min, provide for use in wells with medium and high flow rates, with a possible water flow rate of up to 65 l / min (about 4 m 3 / h). The submersible pump Vodomet 115/115 is one of the most powerful borehole pumps in the line. Its power is about 2200 kW, and the price is 16,000 rubles.
- Pumps Vodomet with a flow rate of up to 150 l / minute are necessary for the water supply of large houses. Such pumps can only be used in wells with a high flow rate, and their use is advisable when the water flow is high - more than 4 m 3 / h.
More accurate data for selection is easy to calculate on your own. The required pressure of the pump is the sum of the values of the required pressure in the taps of consumers, possible pressure losses in pipelines and the height difference between the source and consumers.
Roughly, the maximum pump head can be determined by measuring the distance from ground level to water level in a reservoir:
- if the specified distance is less than 5 meters, then a pump with a head of up to 35 m is suitable. For example, a submersible pump Vodomet 55/35;
- if the distance is from 5 to 25 m, then a device with a declared head of 40 or 50 m is suitable. For example, a submersible pump Vodomet 60/52;
- if the distance is 25 - 45 m, you should choose a model with a head of 60 or 75 m. For example, a submersible pump Vodome 60/72;
- if the distance is from 45 to 60 m, it is better to choose a device with a pressure of 90-150 m. For example, a submersible pump Vodomet 115/115.
Device Reviews
Water pumps Vodomet are very popular with owners of private houses and summer cottages, so a variety of reviews have been accumulated about pumps for Vodomet wells.
Since the submersible pump for the water jet well is not deprived of attention and there are enough reviews about it - let's give a few for an example.
Maxim Viktorovich, 41 years old, Podolsk:
I have had a submersible water pump for the fifth year. Installed in a well at a depth of 25 meters. It works and works, the pressure is normal, only sometimes there is not enough water for everyone.
At first, I thought that my sandy well would "kill" the Vodomet well pump in a couple of years. I don’t know about others, but everything suits me. I'm thinking of looking at a more powerful model.
Maria and Alexander Semenov, Kursk:
Considered different variants for supplying water to the country house. They chose between Ukrainian Aquarius and Russian Dzhileks. Aquarius, they say, is very sensitive to sand, a remote condenser is also inconvenient. In general, we settled on a submersible pump Vodomet 60/52.
It turned out that it gives 52 l / min only in ideal conditions, but in fact it comes out two times less. Nobody warned us about this. Would have known in advance — bought more powerful.
Mikhail Viktorovich, 61 years old, Ufa:
Reliable, good device. A submersible well pump Vodomet has been installed in the well for more than three years. It extracts water from eight meters and in a straight line about 35 meters more. Disadvantages - it is bad to connect through the RCD (often knocks out) and the cables are short.
About the device
The pump, completely immersed in water, works in very difficult conditions. Despite research, testing and the latest developments, these devices often fail. The causes of breakdowns are very diverse, but the main ones are:
- installation and operation of the pump in violation of the manufacturer's recommendations;
- voltage drops;
- dirty, sandy water;
- mechanical wear of parts of the mechanism - housing, blades.
In order for the Water Jet water pump to work properly for as long as possible, it must be installed correctly. So, when installing a pump in a well, it is necessary to mount it in a casing pipe with inside diameter not less than 100 mm.
The upper part of the pipe is closed with a cap to prevent foreign objects from entering the well.
To prevent the device from freezing in winter, a closing well is installed above the well, and the main pipe to the house is buried in the ground below the freezing level. The pump is installed so that it is lowered into the water, but not closer than 1.5 m to the bottom of the reservoir.
The schematic diagram of connecting the Water Jet pump is no different from the nuances of installing any other pump for a well - tied to a cable, it sinks to the bottom of the well. Attached to the cable with staples power cable and a hose through which water will flow.
After the device is at the bottom, the cable should be firmly fixed at the top.
A big plus is that do-it-yourself repair of the Water Cannon pump is quite possible. For a successful repair, you will definitely need spare parts to replace the damaged ones.
If "guilty" - circuit diagram water jet pump - the capacitor may have failed. If the water from the tap began to flow worse, the filter may be clogged or the hose is damaged (and the water simply flows back into the well).
The internal structure, the procedure for disassembling and repairing the Water Jet pumps are indicated in each instruction for the device.
However, it should be noted that it is not recommended to engage in such work on your own - despite the simplicity of the design, its disassembly and assembly (especially) requires some experience.
Equipment overview (video)
Each well in the summer cottage for supply from the depth pure water, must be equipped with a device such as a water jet pump. This device, like a water jet pump, makes it possible to receive water from a well where there is no water.
The powerful technical characteristics of the water jet pump allow you to lift water from great depths. The water jet pump is small in size, has a very simple design, and endowed with the simplest automation.
1 Features and differences
Water jet pump "" regardless of size, models are always made only at domestic enterprises. All pumps of this line are adapted to the Russian climate. And we know that water resources(highways) have never been clean in our country.
As a result, even the simplest water cannon can pump the most dirty water and not fail for a long time. The channels inside the pump are practically not contaminated.
The most important advantage of the pump is that it is able to clean itself. Pumps are also good because, in addition to Soviet components, you can easily pick up spare parts for them from French, American and even German production. At the same time, the price of a water jet pump is much lower than, for example, German or French counterparts.
Now the pump is constantly being improved. The quality of performance is improving, the design has become an order of magnitude better. Here, for example, if we talk about the latest model of a water jet pump for a well, then in it the electric motor is located above the location of the pumping part. As a result, the Water Jet water pump has a body that is an order of magnitude smaller. It became possible to connect electrical cable to the top.
All water jet pumps for wells have a wetted motor. This means that water passes between the casing and the stator sheath. As a result, the engine is continuously cooled.
The water jet pump for the well has high-quality dividing seals. These seals protect the motor and also give a complete seal to the housing.
2 Water jet pump device
The water jet pump for the well has a very strong power. This allows him to provide water not only for a small plot of land, but for the whole house.
We will now analyze the most best models water jet pump.
Submersible model WATERJET PROF 55/35
This model is capable of pumping 3.3 cubic meters of water per hour. Equipped with a 1.5 x 1.5 mm mesh filter. Due to this, it prevents major clogging, which is in the water. This model of a submersible water jet pump is equipped with an overheating relay. The downside is that the float switch is not included.
Pump submersible water jet PROF 55/50
This model is equipped with a powerful 630 W electric motor. The maximum water lift is 50 meters. The immersion of this model can be carried out partially or completely. The maximum diving depth is up to 30 meters.
Submersible pump water jet 60/72
This model fits Russian realities. She has modern design. This model is made of environmentally friendly material. Built-in overheating relay. The set includes a mesh filter. This model is best suited for irrigation of a summer cottage. Has a patented design.
Submersible pump water jet 60/52
This model is the best among all types of submersible pumps. It is designed for pumping clean water. Its main advantage is high efficiency. The maximum head is 52 meters. The power of this model is also very decent - 700 watts. Long power cable 20 meters. Maximum depth up to 30 meters. The submersible water jet pump 60/52 is equipped with a float switch. The body is made of stainless steel. You can buy a Jilex water jet pump of this model in specialized stores without any problems.
Prices on submersible pumps water cannon for wells:
- Gileks water cannon 60/52 A, price from 10,000 rubles;
- The price of a water jet pump for wells Water jet 60/62, 55/50 from 10,500 rubles;
- You can buy a water jet pump Prof 55/35 from 6,500 rubles;
- Gileks Water cannon 60/52, its price is from 9000 rubles.
2.1 Systems of the DOM series based on the Vodomet pump
Every country cottage area, and on it private house requires constant water supply. As a result, a system was developed for a constant supply of water. It is called "Water cannon house".
This system provides a constant supply of water to a summer cottage and a private house without human intervention.
The system consists of:
- Pressure sensor and manometer.
- System control panel.
- Hydraulic accumulator.
- Stop valve.
- Water cannon.
Set of the system "WATER HOUSE":
- Submersible pump.
- Pressure gauge.
- Control panel with pressure sensor.
- Hydraulic accumulator. They are water tanks with a volume of about 50 liters.
- Fittings.
- Stop valve.
This system provides constant water pressure. Saving electricity. Equipped with a current overload sensor, as well as a differential pressure sensor. It also has a soft start system.
The Russian company "Dzhileks" produces equipment for the organization of water supply, heating and sewerage. Among the wide variety of products, a special place is occupied by pumps that pump water from underground wells, wells and open reservoirs. These products can be seen in large industrial and agricultural enterprises and in everyday life.
For example, a Gileks pump for a well will help organize the supply drinking water private house or cottage. There is also equipment that will raise water from a deep well, and if necessary, you can use it to irrigate gardens.
The main feature of the equipment of a young and rapidly developing company is the use modern technologies, simplicity, quality and reliability. All pumps are fully adapted to the harsh conditions of the Russian climate and water composition.
Pumps are less expensive than foreign analogues, many components and components are Gilex's own development. Along with this, high-tech parts supplied from other countries are widely used, which are of high quality. technical specifications. The presence of reliable automation can protect devices from damage in emergency cases.
|
|
The range of products impresses with its breadth and areas of application:
- drinking water pumps;
- sewerage;
- pumping other types of liquids;
- irrigation of crop areas.
Dzhileks pumps for pumping water from a well
These units are mainly used for open water sources with a large area - wells, individual reservoirs and natural reservoirs. It is in such places that it is easier to pump water and place additional equipment in the form along with the pump. The electric motors of these pumps are protected from water ingress and contain a so-called cooling jacket. In private houses and cottages, they are used quite often.
The principle of operation of the float switch is simple - if the water level falls below a certain mark, then the float drops and opens the contacts of the pump motor. This ensures the safety of the product in such a situation.
Similar products are marked as follows - Water cannon PROF 55/35 A, where the first digit 55 indicates the flow rate, measured in liters per minute, and the second digit indicates the pressure, which is also measured in liters. The letter "A" means automatic, that is, the use of a float switch. Depending on the design and diameter of the casing, the parameters of the pump may be different.
Advantages of pumps for wells:
- high efficiency;
- reliability and durability;
- low prices - from 7 to 11 thousand rubles, depending on the capacity;
- the ability to pump water with sufficiently large impurities and sand particles;
- the use of materials that do not impair the quality of drinking water.
Well pumps
They are centrifugal type devices with so-called "floating" impellers. They are used in deep sources of drinking water, and can also be used in wells. The case diameter of these products is 98 millimeters, made of high quality stainless steel, the electric motor is in an oil cup, which ensures its cooling and stability of operating parameters.
These units are used in wells with a depth of no more than 30 meters. They are powerful and high performance. There are pumps for marginal underground sources, where the amount of replenished water is small, and there are pumps for pumping large volumes of water.
Benefits of borehole water cannons Gileks:
- High efficiency, and hence good technical characteristics.
- Using the principle of centrifugal force is more beneficial not only in terms of pump efficiency, but also saves the well itself. For example, vibration products, in addition to great noise, create soil vibrations, which can lead to the destruction of the well and its tightening with sand.
- Ability to pump water with a high content of foreign particles.
- Profitability.
- Reliability and durability due to double protection of the product - from high water pressure and sealing of the electric motor.
- Ease of maintenance and operation.
- Prices are also very democratic - from 7 to 17 thousand rubles.
Water supply system "Chastotnik"
Submersible type pumps Dzhileks "Chastotnik" are designed to create an autonomous water supply with constant water pressure, mainly for residential buildings and dachas. And this is achieved by using a filling tank (hydraulic accumulator) with a control unit.
In fact, the principle of operation of these units resembles pumping station, with the only difference that it is used on the surface, and the submersible pump is at depth. At the top there is only a hydraulic accumulator and a control unit that controls and controls the operation of the electric motor, a system for maintaining a given level of water pressure.
Many people ask why this system is called a chastotnik. It's simple - there is a frequency converter in the control unit, the functions of which are to ensure a smooth start of the electric motor and maintain the necessary water pressure.
The submersible household pump "Vodomet" of the Gileks brand has a number of undoubted advantages:
- Creation of uninterrupted water supply.
- Profitability due to the use of a storage tank and a control unit.
- Durability and reliability.
- Low noise level unlike a conventional pumping station.
- Protection of the main parts and details from overloads in the electrical network.
Submersible pumps of the "Chastotnik" system can operate at a well depth of up to 30 meters. The letter "Ch" has been added to the product labeling. For example, the designation of a similar design is the Water Cannon PROF 115/95 H, here the first numbers indicate the water flow in liters per minute, and the second part indicates the magnitude of the water pressure in meters.
The cost of these products ranges from 29 to 39 thousand rubles.
How to choose a Gilex pump
When choosing pumps for pumping water, a homeowner should consider the following factors:
- Depth, diameter of the well.
- The quality characteristics of drinking water, in particular, it is worth paying attention to the content of impurities of silt and sand. If they are more than normal, then any device of this type may fail prematurely.
- The state of the electrical network, especially the frequency and magnitude of power surges.
- And, of course, the price. However, choosing a cheaper model does not always mean its durability and reliability.
Some tips before buying a Gilex pump:
- Many homeowners do not always delve into the depth of the issue - it seems to them that they bought the unit, installed it, and it should work properly for decades. However, the pump is a device that runs on electric current, the instability of its parameters may cause damage or deterioration of performance. Therefore, knowing domestic electrical networks, you should take care of purchasing a voltage stabilizer, which, among other things, will save all other appliances that consume electricity in the house.
- You should not buy the most powerful pump, as this is not always economically feasible. In addition, if water is not collected in the well so quickly, that is, its low productivity, then this will not lead to anything good. Such a unit will quickly pump out the contents of the well, and then it will run idle - there is a possibility of its failure.
- The composition of the water also affects the performance of the Gilex pump, like any other similar device. On the forums you can often see negative reviews about Gilex pumps, often all the comments boil down to the fact that it fails due to the high content of iron, lime and sand impurities. Even if you install an expensive imported pump famous brand, then it will also fail without taking into account and analyzing the water content in the well. And for some reason, some people are accustomed to speak negatively about domestic products. And often they are not worse than foreign goods.
Therefore, only taking into account all the norms and requirements for pumping equipment will help you choose the best product that will last for many years.
The Russian company "Dzhileks", located in the village of Klimovsk, Moscow Region, produces submersible multistage pumping units. Water cannon pumps are manufactured to provide independent water supply to a private house and garden watering. Moreover, the range of equipment of this brand is represented by a whole set of household appliances that have different power and dimensions. Thanks to such a large selection, the buyer can choose a model that provides the required amount of water.
All submersible pumping units of the Vodomet series are manufactured at domestic enterprises, therefore, even at the development stage, parameters are laid in them that allow the equipment to be adapted to work in the conditions of domestic water supply systems. This is especially important, since our waterways are not as clean as foreign ones.
Borehole pumps of this series are able to pump even dirty water with impurities up to 300 g per m³. For the production of guides and impellers, the manufacturer uses a special LEXAN polymer. And for the manufacture of thrust bearings, ceramics and graphite are used. Thanks to such innovative additions, the wear resistance of the units increases, their service life increases, and the likelihood of breakdowns is minimized.
At the same time, downhole units of the Dzhileks brand are practically not subject to clogging, since they have a self-cleaning function. It is not surprising that such pumps can only be heard about positive reviews, because in addition to domestic nodes, they use parts of American, French, Swedish, German and Italian production.
The performance and design of pumps of this brand are constantly being improved. For example, new models are distinguished by the fact that the electric motor in them is located above the pumping part. This made it possible to reduce the dimensions of the housing, as well as connect the electrical cable to the upper part of the unit.
Advantages of water jet pumps
Submersible pumps of this brand have whole line advantages over similar models from other manufacturers. Thanks to them, they have earned numerous positive reviews. Among the advantages of these units are the following:
- The borehole and well pump of the Dzhileks brand works very quietly, which is important for country houses and dachas.
- Compact dimensions allow you to choose a unit for any well size.
- Unlike vibration models, submersible pumping units of the Vodomet series do not create turbulences in the water that raise silt and sand from the bottom.
- Acceptable cost, since the pumps are of domestic production.
- High performance and efficiency.
- The units can work even in dirty water containing sand, silt or clay within 2-5 kg/m³.
- Due to the washed motor (water circulates between the stator shell and the unit housing), the electric motor is effectively cooled.
- Another significant advantage is the use of two separate sealing parts in the design. They not only protect the electric motor from high pressure, but also ensure its tightness and separate oil filling of the internal parts.
- In models of the PROF series, the membrane and seal are protected (this function is not provided in other units).
Important to know: pumps must be lowered into the shaft of a hydraulic structure on steel cables. This is the only way to be sure of the reliability of fixation.
Varieties
All pumps of the Vodomet series can be divided into two types:
- well unit;
- borehole pump.
Dzhileks brand well pumps are suitable for use in relatively shallow structures (8-10 m). They can also be used in open reservoirs and various water tanks.
The main condition for the operation of such a unit is sufficient dimensions of the tank, well or reservoir. The thing is that it is necessary to install not only the pumping unit there, but also the float switch.
Many reviews say that the Vodomet well pump differs from the downhole unit in a number of advantages:
- The efficiency of such a device is much higher. Consequently, submersible pumps for wells with the same technical characteristics will give greater productivity than similar downhole equipment.
- They are less sensitive to dirty, silty or sandy water than borehole pumps.
- In such models, it is not necessary to use protection against operation in the absence of water, since there is a simple float switch.
- The price of such units is in the range of $ 90-130, which is lower than the cost pumping equipment for wells.
Models
Submersible pumping units of the Vodomet series are produced in various modifications. All of them are different technical parameters and power. Usually the marking of pumps of this brand looks like this - 55/50A (there may be other combinations of numbers). The letter designation "A" indicates that the pumping equipment is equipped with a float switch that produces automatic shutdown in the absence of water. The numbers in the designation indicate such characteristics:
- The first number is the flow rate of the pumping equipment at the outlet. It is measured in l/min. This value is determined with fully open taps, in conditions where there is no resistance to the movement of water.
- The second number is the maximum head that can be reached with fully screwed taps. Measured in meters.
Based on the marking, we can draw the following conclusions about the operation of units of various modifications:
- Deep pumps 60/32 with a flow rate of 60 liters per minute will work more efficiently in water intake facilities with a small debit. At the same time, the performance of the hydraulic structure should not be lower than the performance of the pumping equipment. Otherwise, the pump can quickly pump all the water from the water intake and will work "dry". This can lead to failure of the unit.
- A device marked 60/52 can provide water consumption of 35-40 liters per minute (more than 2 m³ per hour). This is equal to four faucets open at the same time.
- A Gilex brand pump marked 60/72 with a similar water flow will provide a stronger pressure. Such units allow you to move water over longer distances, so they are suitable if the source is away from home.
- The 115 liters per minute borehole pump is suitable for use in medium to high production wells. In this case, the debit of a hydraulic structure can be about 4 m³ per hour. Submersible pumping equipment model range 115/115 is one of the most powerful devices. The power of such pumps reaches 2200 kW.
- For water supply of multi-storey buildings, it is better to use units with a flow rate of 150 l / min. They can only be installed in hydraulic structures with high performance. It is also better to use them when the water flow is more than 4 m³ per hour.
How to choose?
Of course, you can make a choice of a Water Jet pump model based on customer reviews, but it’s still worth doing a simple calculation yourself. To determine the required pressure of pumping equipment, it is necessary to take into account the required pressure in consumer taps. It is important not to forget about possible pressure losses in the pipeline, as well as the height difference between the consumer and the source.
- if this value is less than 5 m, then you can use a pumping unit with a pressure not higher than 35 m. Submersible pumping equipment Vodomet 55/35 is suitable for this purpose;
- if from the water mirror to the earth's surface within 5-25 m, you can buy a pump with a pressure of 40-50 m, for example, a pumping unit Vodomet 60/52;
- at a distance of 25-45 m, it is better to use a model with a pressure indicator in the range of 60-75 m. For these purposes, a submersible device Water cannon 60/72 is suitable;
- if from the water surface to the top of the earth 45-60 m, it is better to choose more powerful units with a pressure from 90 to 150 m. The device of the 115/115 model range will cope well with this task.
Operation and possible breakdowns
Since pumping equipment is completely submerged in water, it works in extreme conditions. Despite constant improvement, the pump can fail. The most common causes of breakdowns can be such phenomena:
- If the installation and use of the unit was carried out without following the recommendations and instructions of the manufacturer, then there is a high probability of a breakdown.
- Voltage fluctuations in the network can lead to the failure of pumping equipment.
- If the unit is constantly pumping very dirty water with a high content of sand particles, this will accelerate its wear and failure.
Important: the guarantee of a long service life of a deep-well pump is correct installation in a hydraulic structure. At the same time, the diameter casing pipe must be at least 100 mm. The unit must be completely submerged in water, but no more than 1.5 m from the bottom of the water intake.
To protect the well from foreign objects, the upper part of the casing string is closed with a special cap. To prevent freezing of water in winter period a caisson is constructed above the upper part of the casing pipe, and the pipeline is connected and laid to the house at a mark located below the freezing point of the soil.
Pumps of the Vodomet series are lowered into the well, suspended on a strong cable, to which a power cable and a hose are attached to the sides for lifting water. The rope is securely fixed at the top.
They are submersible devices. They are multi-stage units, the operation of which is carried out through the use of centrifugal force.
Among the characteristic design features, which distinguishes the borehole pump Vodomet, can be distinguished:
- powerful engine equipped efficient system cooling;
- "floating" impellers;
- connection of the power cable to the top cover of the product, so that it can be installed in wells with a small casing section;
- built-in capacitor that allows you to use a three-core cable for connection.
The isolation of the hydraulic and electrical parts from the immersion medium is carried out by mechanical seals, which increase the life of the unit.
Oil-filled engine driving deep pumps for the well Vodomet, differs in stability of working parameters.
It is equipped with a protective casing that prevents oil from penetrating the cable.
Depending on the modification, downhole pumps Vodomet can be equipped with:
- automatic equipment that prevents the possibility of idling and protects against deformations.
- a removable filter, which is installed in the intake part and does not allow sand and dirt to be sucked in.
Operational Benefits
The borehole pump Dzhileks Vodomet differs in reliability, simplicity in use and service. Its other benefits include:- High efficiency, providing good performance and other technical parameters.
- The presence of protection in the form of a thermal protector, which protects the engine from overheating.
- Long service life. The pump for the well Water Jet Dzhileks can be used for a long time in intensive mode due to the special arrangement of parts and the use of high-quality raw materials.
- small size and weight, simplifying the transportation of the device. In addition, they help to reduce vibrations.
Pumps for water wells Vodomet are characterized by economical energy consumption and almost no noise during operation.
Cooling the motor with pumped water ensures trouble-free performance of the specified functions.
The relay, which protects against overheating, is placed outside the stator windings of the power mechanism. This makes it easier to diagnose breakdowns and carry out repairs.
Thanks to the use of "floating" impellers, Vodomet well pumps are not very sensitive to the composition of the pumped liquid and can be used to transport water with a high sand content.
Degree of protection IPX8 protects against ingress of moisture and is designed for operation in immersed state for more than 30 minutes.
Suggested range
Pumps for the well Vodomet are represented by several models. They differ in the nuances of design, technical characteristics and equipment.The line of equipment includes devices that can be used:
- for watering;
- for sources with low debit;
- for the organization of automatic supply.
Downhole pump Dzhileks Vodomet PROF - a classic downhole pump, with which it is very easy to organize a water supply system. It will need to purchase a hydraulic accumulator, a pressure switch and other components.
Borehole (well) pump Gilex Water Jet PROF A equipped with a float switch, which prevents operation without water. It turns off and on automatically.
well pump Water cannon "House" represents a more advanced version of the equipment, in terms of technical equipment.
It refers to automatic systems water supply and includes the following elements:
- well pump Water jet with a wire for connecting to the electrical network;
- storage tank with a robust steel body and a flexible synthetic rubber membrane;
- three-pin fitting;
- stop valves;
- check valve, excluding the flow of fluid in the other direction.
Using the remote control with a microprocessor, you can program desired parameters in the pipeline, depending on the operating conditions.
The Dom model is a modified water jet pump PROF, which has retained all the best properties of basic products and is equipped with several additional functions. Among them:
- protection against "dry running", voltage surges and overloads;
- smooth start, which reduces the likelihood of water hammer during commissioning and reduces loads.
Application features
In order for the Vodomet downhole pump to retain its functionality for as long as possible, it is necessary to strictly follow the rules of use recommended by the manufacturer. According to them, you should:- apply for pumping medium, the temperature of which is from +1 °C to +35 °C and does not go beyond the specified limit;
- avoid installation in sources where the distance to the day is less than 1 m;
- exclude the pumping of liquid containing more than 2 kg / m 3 of sand in suspension;
- do not allow borehole pumps Vodomet to use if a violation of the integrity of the wire is detected.
If you are going to use the Dzhileks Vodomet borehole pump for its intended purpose, you must first check the performance. To do this, it is connected to the power supply for a few seconds.
When using the Vodomet pump for wells, it is necessary to provide for the installation of a head that will close the top of the casing and protect it from foreign objects and groundwater.
To prevent freezing, it will be necessary to build a well with a cover, and lay the pipeline below the soil freezing level characteristic of the area.
In this case, the internal cross section of the pressure water supply should not be less than the same parameter of the inlet of the apparatus for water supply.
To hang the water jet borehole pump, you will need a steel cable that is pulled through the lugs in the cover. It must support the weight of the apparatus and the filled pipe.
During the first start-up, the possibility of getting a significant amount of sand should be taken into account. In such a situation, it is forbidden to turn off the unit: it is left to work until the source is “pumped” and there are no impurities.
Mounting example
How to cook frozen cutlets in a pan?
Pike perch baked in salt
How should a girl behave in a relationship with a guy so that he falls in love?
How osteochondrosis manifests itself on an x-ray Visible signs on the human body of osteochondrosis
What can be prepared for the festive table for Easter Easter table decoration and recipes