Bas bath installation. Acrylic bathtubs Bass (38 photos) - available functionality

20.06.2020

Instructions for Bas Acrylic Bathtubs

Thank you for purchasing a bathtub. trademark"BAS".

Foreword

Bathtubs "BAS" are modern technologies and original lines that provide the comfort of taking water procedures.

This manual describes the functions of the baths, installation requirements, care and use.

Attention: In order for the bath to benefit you, work for a long time and reliably, a number of conditions must be met:

1) Ask your doctor how much bathing is useful for you.

2) Provide for the installation of filters for water purification.

3) Do not turn on the hydromassage without filling the tub with water!

4) It is forbidden to seal the seams between the wall and the bathroom with hard building materials (ceramic tile, curbs, mortar, etc.)

Technical description

Whirlpool bath standard equipment:

1. Acrylic bath - 1 pc.

2. Metal frame - 1 pc.

3. Legs - 4-8 pcs. (depending on model)

4. Panel clamp - 2-4 pcs.

5. Self-tapping screws for fixing the acrylic panel - 5-12 pcs.

6. Additional equipment: acrylic panel (screen), drain-overflow device, back massage, air massage, etc. (at the request of the buyer)

Transportation of bathtubs When transporting and installing the bathtub, care must be taken not to damage the piping systems and electrical equipment. It is necessary to avoid mechanical damage to the body of the bath and the screen, as well as to exclude the effect of chemically active reagents on the surface of the product.

Instructions for preparing a place for installing bathtubs:

1. A plumber performing work on the removal of hot and cold water, must take into account linear dimensions bathroom. Otherwise, the pipe outlets may abut against the stiffeners, aggregates and fittings of the bath. This means that the bath cannot be installed close to the walls.

2. The drain pipe of the bathroom should not rise more than 10 cm above the floor. If this is not possible, then a podium must be made.

3. The legs are used to level the bathtub, so it is necessary to install additional stops under the supporting structure of the bathtub.

4. Wiring for the bath equipment must be double insulated cable with a cross section of 2.5 mm2.

System protection must be based on differential (multiple) tripping (1fn=30mA). The supply cable must comply with EU regulations and standards.

electrical system

Installation of the electrical system must be carried out by a professional electrician, with an electrical safety approval group of at least group 3. The power supply wiring for the backlight, the hydro-air massage system of the bath must have a “Residual Cutout Device” (RCD) with a rating of 30 mA.

Attention:

Connect the electric cable in the following order: blue wire - "zero" brown wire - "phase" yellow-green wire - "ground" The RCD must be located outside the bathroom. It is strictly forbidden to connect the power supply of the backlight, the hydro-aeromassage system of the bath through the plug and socket.

The use of the lighting system without water in the bath is strictly prohibited.

Description V Hz kW
Hydromassage 220/240 50 0.9-1.5
Air massage 220/240 50 0.7-0.9

The power is indicated depending on the model of the bath.

Equipment for hydro and air massage includes:

1. hydraulic pump

2. air massage compressor

3. function buttons and whirlpool power control

4. whirlpool jets (back side)

5. piping system

Optional equipment

air massage (jets are at the bottom of the bath)

hand shower, cascade, mixer

backlight

back massage

headrest

pen

Bath installation guide.

1. Before installing the screen, mark with a pencil or felt-tip pen the location of the centers of the screen fastening plates on the front side of the bath.

2-5. Next, you need to screw 4 M 12 nuts onto the mounting legs, use two M 12 nuts to fasten the mounting legs to the bathtub frame, and with the remaining two M 12 nuts and two M 12 washers, fix the corner of the screen attachment on the mounting leg so that it reaches the edge of the screen . Attach the screen to the tub and drill dia. 3.5 mm to make holes in the corners of the screen attachment (this operation is recommended to be done after removing the screen).

6-7. Mark on the upper part of the screen the points with the centers of the embedded plates for fixing the screen already marked on the front side of the bath, placing them at a distance of 1.5-2 cm from the lower edge of the front side of the bath. In the marked areas of the screen, drill holes for self-tapping screws with a drill with a diameter of 3.5 mm. Next, use the same drill to make holes in the embedded plates of the screen (this operation is recommended to be performed after removing the screen).

8. Using the legs, adjust the bathtub to the height of the acrylic panel, while taking into account the zero level of the upper plane of the bathtub.

9. Install a drain-overflow device on the bathtub, screw on the siphon (not included) and connect to drain pipe bathroom

10-11. Aligning the screen with the embedded baths, it is necessary to screw self-tapping screws into the holes, after which put the plugs on them.

12. After installing the tub, remove the protective film.

13. Install the bathtub wall bracket. A wall bracket is offered to reinforce the rigidity of the tub.

ATTENTION:

It is forbidden to close the seams between the wall and the bathroom with rigid building materials (ceramic tiles, curbs, mortar, etc.). If the above is not observed, warranty repair will not be implemented

Instructions for using hydro-, air massage, back massage, water lighting (mechanical activation of functions).

Buttons for turning on hydro-, air massage, water illumination. (on and off - by pressing your finger inward)
Switch for hydromassage and back massage. (simultaneous operation of functions is possible)
Hydromassage and back massage power regulator. (turn knob clockwise)

Electronic (touch) control of the functions of hydro-, air massage, chromotherapy. (1, 2 - air massage power control; 3 - on / off air massage function; 4 - on / off hydro massage function; 5 - on / off chromotherapy function)

There is an automatic shutdown of the hydromassage and chromotherapy functions, in case of lack of water in the bathroom. Aeromassage is turned off manually after blowing the jets.

Bath care

When washing the tub, use a liquid cleaner that is harmless to acrylic and plastic surfaces (see cleaner instructions). The manufacturer offers you a specialized cleaning agent "TIM-PROFI" adapted to our products. Remove stains with a soft cloth.

Surface scratches or burn marks from cigarettes can be removed with light sanding. sandpaper(No. 1000/2000) with water. You can restore the shine of the surface with a liquid polishing agent.

Cleaning the hydraulic system of the bath

This type of cleaning is carried out using hard water (over 15 salt deposits per cubic meter water). It is recommended to clean the bath hydraulic system at least 2 times a year as follows:

1. Fill the bath hot water(40C).

2. Pour in liquid detergent at the rate of 2 g per 1 liter of water and start hydromassage for about 5 minutes.

3. After that, turn off the electric pump and drain the water from the bath.

4. Refill the tub with cold water and turn on the hydromassage for 2 minutes.

5. Drain and clean the bath (see "Care of the bath").

The manufacturer offers you a specialized hydraulic system cleaner adapted to our products.

WARNING: Never use metal brushes or tools, or solvents or detergents with abrasive additives. Also avoid contact with ammonia or chlorine on brass and chrome parts baths.

How to use the hot tubs

It is forbidden to turn on the whirlpool bath when the hydromassage jets are closed and the water level is 5-6 cm below the jet opening. Never use the bathroom after taking alcohol or medicine. Hydromassage for medicinal purposes can only be carried out on the advice of a doctor who will select the appropriate duration of sessions and water temperature for you.

Taking cold bath You improve your health. A warm or slightly hot bath relieves tension. To relax muscles and relieve pain, take a bath (up to 40 C). The first hydromassage session, which should be carried out only in warm water, should last no more than 10 minutes. The effect of water jet massage is directly proportional to the temperature of the water and the duration of the session. After taking a bath for too long, you may feel tired. And if you feel sleepy while taking a bath, turn off the hydromassage device for a while and cool the water.

Overweight people are contraindicated in hot tubs with a water temperature exceeding 38 C.

Before turning on the whirlpool system, make sure that the jet nozzles are not pointing upwards.

The simplest faults possible reasons and ways of elimination.

Fault occurring	Possible reason	Remedy
	There is no mains voltage.	Call a specialist (electrician).
The hydraulic pump does not turn on.	The plastic tube that connected the button and the pump jumped off the hydromassage button.	Turn off the voltage. Attach layer. handset to the base of the button and restart the system.
	Jet nozzles closed.	Turn counterclockwise to open the nozzles.
The hydraulic pump is working, but no water is coming from the jets.	Clogged piping system.	See the paragraph "Care of the bathroom".
Increased vibration in the operation of the hydraulic pump.	The fastening of the engine to the metal frame of the bath has loosened.	Turn off the voltage. Tighten the engine mounting bolts.

The manufacturer reserves the right to make changes to the design and equipment of bathtubs..

AT winter period installation of the product is carried out in a warm room after 6 hours from the moment the bath is delivered to the client

When installing a drain-overflow not provided by the manufacturer, the bathtub is removed from the guarantee.

Active chemicals that can damage the acrylic layer are not allowed to come into contact with the surface of the product.

High (above 80C) thermal impact on the surface of the product is prohibited.

Installation (installation) of the bathtub (shower curtain) and equipment included in the kit is carried out by the buyer with the involvement of specialists licensed to carry out this type of work. The installation is guaranteed by the installer with a note in the warranty card.

Installation of products should allow free access to components and assemblies attachments, as well as to the connecting hoses for the water and air supply.

Dear buyer! The manufacturer sets the warranty period for bathtubs up to 10 years. All equipment falls under this warranty period, except for: a drain-overflow device, hydromassage, aeromassage and any other additional equipment (see clause 7, page 1 of this manual), for which a 2-year warranty service period is set.

Warranty service is not provided in the following cases:

– non-observance of installation rules and operating conditions;

– loss of the receipt or warranty card;

– careless storage or transportation by the owner, trade or transport organization;

– attempts of unskilled repair;

– mechanical damage, traces of exposure to chemical and abrasive substances due to improper care of the product;

– making corrections to the text of the warranty card;

- RCD (residual current device) is not installed, if available on the bath electrical equipment;

– use of the product for business purposes.

The company does not take responsibility for damage caused during transportation and delivery.

Warranty service does not cover installation and disassembly costs.

Video instructions for assembling the frame of the acrylic bathtub Bas

The well-known company Bas has gained wide popularity due to the use of two modern technologies reinforcement of bath surfaces. The first option is based on reinforcing the bass tub with polyester resin and special glass fiber. The second technology involves the use of absolutely safe, environmentally friendly high-density two-component polyurethane foam.

Modern bathtubs

Currently full the lineup companies represent:

bass acrylic tubs;
curtains for them;
shower cubicles;
special shower enclosures.

30 modern models have classic rectangular, asymmetric and symmetrical shapes. All products are manufactured in strict accordance with advanced Italian and American technologies using original equipment.

Any Bass bath is molded using special vacuum forming machines manufactured by the well-known Italian company SELF. During the operation of such equipment, infrared heating of certain zones is used. This method allows you to bend the base sheet into any desired shape.

Popular Bass Models

To date, the acrylic bathtub Bass is the best option in the price-durability ratio for many citizens of our country. The most famous models are considered to be all corner baths, artsy curved shape, allowing you to save space and ennoble appearance rooms.

Let's dwell on three unique models that will satisfy any requirements of the most fastidious users:

Bass bath Laguna - the maximum volume of water up to the protective drain at the top is 295 liters. The depth of the side asymmetric model in the center is 44 cm, and the height of the screen itself is 55 cm. The electrical characteristics of this bath are V - 220/240. Electrical wiring for powering electronic components is made using an RCD. The standard package includes:

metal carcass;
front panel;
convenient removable legs for installation of a bathtub and a drain device.

Additionally, this model is equipped with: a cascade, safety handles, special jets for a relaxing massage of the back and legs, a headrest, lighting and a pillow for the switch button.

Bath Bas Alegra - this model has a smaller volume. Only 220 liters. But it fits perfectly into small bathrooms in "Khrushchev". The maximum center depth is 45 cm and the screen height is 56 cm. The classic equipment is the same as the previous model, with the same additions: headrest, handles, jets, cascade, button pad and backlight. This bathtub is very practical and easy to use, popular with young couples who can easily climb over a fairly high rim. The low price is perfectly combined with high functionality. This brainchild of Bass is a new generation acrylic bathtub with a comfortable corner seat made of durable materials.
Acrylic bath Bass Nicole - enough. In addition to the shape and volume, this model is no different from the previous one. The maximum volume is 290 liters. It is easy to install in the space between two walls or in a small niche, which are still found in former communal apartments. This is possible thanks to two straight sides on both sides of the product. The lodge has rectangular shape slightly elongated on one side. If necessary, this bath can be equipped with a vertical hydromassage stand and a special original curtain for this model.

Please note: the power supply to all models is carried out through the RCD, so it is imperative to ground this device. Otherwise, the use of such a bath will be unsafe for humans.

Advantages of acrylic types of bathtubs

Recently Bass baths are gaining more and more popularity, but what are the main advantages of such devices?

Users and installers of plumbing accessories note whole line advantages of such baths.

Unlike steel and cast-iron counterparts, Bass acrylic baths are lightweight and have very high strength, which has been inaccessible to non-metal products for a long time.
Even unfilled with boiling water, they have a temperature that is pleasant for a person and does not allow the collected water to cool for a long time. This property is available through the use of acrylic, which has a very low thermal conductivity. On average, in 30 minutes the water will cool down by only one degree Celsius.
All such models of baths have ergonomic shapes, specially created close to the curves of the human body.
The acrylic surface is highly resistant to various mechanical damage: chips, deformations and scratches.
Acrylic is able to retain its original luster for many years and does not turn yellow, as happens with enamel counterparts. In addition, they practically do not slip, which makes their use safer for children and the elderly.
The surface of such bathtubs is covered with a special antibacterial layer that prevents the development of various diseases and fungal deposits.
The water is collected quite quietly, which allows you to take a bath even at night, without fear of disturbing your family and neighbors.

Tip: if you want to install a bathtub model with a hydromassage function, then first consider where the additional equipment is most optimally placed.

Conclusion

If it was decided to use Bass products, acrylic bathtubs will be purchased at the most reasonable price. And the number of various additional functions will turn the usual hygienic bathing into a real spa treatment.

High environmental friendliness and ergonomics of all models allows you to install and use these devices for comfortable bathing of babies and young children. They are easy to fit into any interior, thanks to the variety of shapes and convenient installation method. The only thing you should not forget about is the mandatory grounding of such baths. Do not be lazy and risk your health, relying on luck.

Gallery

Corner asymmetrical acrylic bathtubs

Buying the most popular models of Erlit shower cabins has become even more profitable!

Pages: 1 2

Corner asymmetrical baths

When choosing a bathtub, you need to pay attention to the size of your bathtub. If the bathroom is not very large or you just want it to be more spacious, then the best option for you is a corner bath. After all, it allows you to save space, unlike rectangular counterparts. Moreover, its dimensions (150 cm and more) make it possible to feel quite comfortable in it.

Corner asymmetrical acrylic bathtubs

We hasten to please that buying the most popular models of Erlit shower cabins has become even more profitable!

Hurry up - the promotion is valid until the end of booths and gifts in stock!

Pages: 1 2

Corner asymmetrical baths

In addition to the standard rectangular bath. sanitary ware manufacturers can also offer you asymmetric bathtubs. Corner bathtubs have become the most popular. which you can install in the corner of the bathroom.

When choosing a bathtub, you need to pay attention to the size of your bathtub. wall panels instruction. If the bathroom is not very large or you just want it to be more spacious, then the best option for you is a corner bath. After all, it allows you to save space, unlike rectangular counterparts. Moreover, its dimensions (150 cm and more) make it possible to feel quite comfortable in it.

But this is not the main advantage of a corner bath. It will decorate your bathroom and make it special and individual. You can choose a bath. both right handed and left handed. It also allows you to choose a model that will suit you, both externally and functionally.

Bathroom sizes may vary. We also offer you additional equipment for them in the form of handles, cornices, headrests, lighting. It's all designed for your convenience. You can also choose from us for your new bath hydromassage system.

A corner bath will allow you not only to decorate your bathroom with such an interior element, but also to feel all its amenities for yourself.

Acrylic bathtubs Bass - available functionality

Acrylic bathtub Riola

The well-known company Bas has gained wide popularity due to the use of two modern technologies for reinforcing the surfaces of bathtubs. The first option is based on reinforcing the bass tub with polyester resin and special glass fiber. The second technology involves the use of absolutely safe, environmentally friendly high-density two-component polyurethane foam.

Modern bathtubs

Currently, the company's full lineup is represented by:

bass acrylic tubs;

curtains for them;

shower cubicles;

special shower enclosures.

30 modern models of Bas baths have classic rectangular, asymmetric and symmetrical forms of whitewashing from the ceiling. All products are manufactured in strict accordance with advanced Italian and American technologies using original equipment.

Popular Bass Models

To date, the bass acrylic bath is the best option in terms of price-durability for many citizens of our country. The most famous models are considered to be all corner baths, frilly curved shapes that save space and ennoble the appearance of the room.

How to choose an acrylic bath? Let's dwell on three unique models that will satisfy any requirements of the most fastidious users:

Bass bath Laguna - the maximum volume of water up to the protective drain at the top is 295 liters. The depth of the side asymmetric model in the center is 44 cm, and the height of the screen itself is 55 cm. The electrical characteristics of this bath are V - 220/240. Electrical wiring for powering electronic components is made using an RCD. The standard package includes:

metal carcass;

front panel;

convenient removable legs for installation of a bathtub and a drain device.

Additionally, this model is equipped with: a cascade, safety handles, special jets for a relaxing massage of the back and legs, a headrest, lighting and a pillow for the switch button.

Bass corner bathtub model

Bath Bas Alegra - this model has a smaller volume. Only 220 liters. But it fits perfectly into small bathrooms in "Khrushchev". The maximum center depth is 45 cm and the screen height is 56 cm. The classic equipment is the same as the previous model, with the same additions: headrest, handles, jets, cascade, button pad and backlight. This bathtub is very practical and easy to use, popular with young couples who can easily climb over a fairly high rim. The low price is perfectly combined with high functionality. This brainchild of Bass is a new generation acrylic bathtub with a comfortable corner seat made of durable materials.

Acrylic bathtub Bass Nicole is a fairly large bathtub. In addition to the shape and volume, this model is no different from the previous one. The maximum volume is 290 liters. It is easy to install in the space between two walls or in a small niche, which are still found in former communal apartments. This is possible thanks to two straight sides on both sides of the product. The bed has a rectangular shape, slightly elongated on one side. If necessary, this bath can be equipped with a vertical hydromassage stand and a special original curtain for this model.

Another corner bath

Please note: the power supply to all models is carried out through the RCD, so it is imperative to ground this device. Otherwise, the use of such a bath will be unsafe for humans.

Advantages of acrylic types of bathtubs

Recently Bass baths are gaining more and more popularity, but what are the main advantages of such devices?

Users and installers of plumbing accessories note a number of advantages of such baths.

Unlike steel and cast-iron counterparts, Bass acrylic baths are lightweight and have very high strength, which has been inaccessible to non-metal products for a long time.

Even unfilled with boiling water, they have a temperature that is pleasant for a person and does not allow the collected water to cool for a long time. This property is available through the use of acrylic, which has a very low thermal conductivity. On average, in 30 minutes the water will cool down by only one degree Celsius.

All such models of baths have ergonomic shapes, specially created close to the curves of the human body.

The acrylic surface is highly resistant to various mechanical damages: chips, deformations and scratches.

Acrylic is able to retain its original luster for many years and does not turn yellow, as happens with enamel counterparts. In addition, they practically do not slip, which makes their use safer for children and the elderly.

The surface of such baths is covered with a special antibacterial layer that prevents the development of various diseases and fungal deposits.

The water is collected quite quietly, which allows you to take a bath even at night, without fear of disturbing your family and neighbors.

Rectangular bath model

Tip: if you want to install a bathtub model with a hydromassage function, then first consider where the additional equipment is most optimally placed.

Conclusion

Installation instructions for asymmetric bathtub bass allegro

Modern bathtubs are complex plumbing fixtures in order to relax and unwind, decorate the bathroom and cheer up with just one appearance. The Russian company BAS manufactures its products using modern Italian equipment from imported acrylic sheets, with mixers, nozzles, shower pipes of well-known European brands.

It turns out that BAS acrylic bathtubs are completely made of imported components, but they are shaped at a factory in Russia.

The central office of BAS is located in the capital; there are also representative offices and warehouses in Yekaterinburg and Novosibirsk. The company manufactures acrylic whirlpool bathtubs, shower enclosures and corners, bathtub headrests, and other bathroom accessories. These products are represented by dozens of dealers different countries CIS and beyond.

Most often, BAS acrylic bathtubs are installed not on the basis of meeting any requirements for functionality or appearance, but based on the available space in the room. For the convenience of size selection, more than two dozen models have been developed: rectangular, corner baths with a semicircular or flat front panel.

The corner semicircular bath "Alegra" has dimensions of 150x90 cm and a height of 52 cm. It is installed on a metal frame, equipped with 6 hydromassage jets. Somewhat smaller in size, but the same size as the bathing bowl itself, the Verona hand-held bathtub milling machine video tree. In size (150x70 cm), it fits perfectly into the place of the old cast iron bathtubs who have already served their purpose. This model is also equipped with a drain-overflow system, has a bottom design that dampens noise and vibration from water falling on it.

The bathtub "Imperial" can accommodate 2 people, despite the fact that it has dimensions of only 150x150 cm and a standard depth of 47 cm. The model is also equipped with 6 hydromassage jets. They are located in such a way that a person, leaning on any of the three protrusions for the back, receives a pleasant hydromassage with jets of water and air. The angular model "Iris" has a similar design, only it is equipped with 9 nozzles, which increases the possibilities and intensity of hydromassage. The Laguna bath also has 9 jets, but it is designed for installation dimensions of 170x110 cm. There is a clearly marked seating area if you are not taking a bath, but simply taking a shower.

To avoid splashing water throughout the room, BAS bath screens are installed, which are plastic enclosing dampers. They can be moved and closed if necessary. On the front arc of almost all models, a ledge is provided for mounting such curtains.

Corner models, like Vectra, Sagra, Florida, are made both in left and right versions, so as not to interfere with the owners' plans for decorating the rest of the bathroom. Hydromassage in rectangular baths, like "Jamaica", "Malta" or "Atlanta", relaxes no less, but have a simpler design.

Bathtubs, showers and whirlpools BAS (BAS), as well as:

Installation instructions for asymmetric bathtub bass allegro 2014-12-11T18:58:08+03:00 admin articles Acrylic Bathtubs, Asymmetric Acrylic, Asymmetric Acrylic Bathtubs, Asymmetric Bathtubs,Corner Asymmetric

Contents Asymmetric acrylic corner bathtubs Acrylic corner asymmetric bathtubs Acrylic bathtubs Bass – affordable functionality Asymmetric bass allegro bathtub installation instructions Acrylic corner bathtubs Asymmetric acrylic corner bathtubs Buying the most popular models of Erlit shower enclosures has become even more profitable! Hurry - the promotion is valid until the end of booths and gifts in stock! Pages: 1 2 Corner...

subscriber Construction Blog

First of all, of course, a few words should be said about the company, the manufacturer of acrylic bathtubs BAS. This company continues to amaze its customers and partners by proving that bathtubs made in Russia are no worse than their foreign counterparts.

The main products of this company are hydro and air massage acrylic bathtubs.. Among the explicit positive sides Acrylic bathtubs manufactured by BAS include the following:

bas acrylic bathtubs are made using senoplast multi-layer polymer plastic - a combination of acrylic and ABS plastic gives strength and reliability to the bath;
the same plastic from senoplast also has an antibacterial effect, which protects the bathtub from the growth of various bacteria
bas bathtubs are manufactured using high-quality Italian equipment, so the products can compete with European products
acrylic bath reinforced steel frame which is well protected from water
products are manufactured in Russia and therefore its features take into account the arrangement of Russian bathrooms

Buyers about BAS bathtubs

It is interesting what the buyers themselves say about bas acrylic bathtubs, it is quite easy to find reviews on the Internet. It turns out that most of the buyers were very satisfied, saying that the bas acrylic bathtub works great. Buyers happily share their impressions that the bath of this company:

does not scratch, despite the fact that the shower periodically falls into it
the side is very thick and you can sit on it
the bath retains heat perfectly, and therefore you can bathe in it for a long time, even if hot water in limited quantity
the bath is equipped with beautiful comfortable armrests
takes up little space, all models are well thought out
the only detail that earned a few negative reviews was the hydro and air massage system - they say that it does not last very long, and repairs are quite expensive

It was also interesting that many buyers installed and assembled both an acrylic bathtub and a bathroom curtain on their own. Of course, not everyone can do this, but still we can assume that this indicates the quality of the product, since even a non-professional assembler will do everything with high quality. However, the installation of a bas acrylic bathtub can be done by professionals - it all depends on the capabilities of the client. The instruction that comes with the bathtub is quite clear and simple, so the assembly of the bas acrylic bathtub does not present any difficulty.

Three great examples of BAS products: Atlanta, Florida and Laguna

One great example is the acrylic bathtub. bas atlanta which has certain advantages. So, the dimensions of this bath model are quite modest, it is suitable even for a small bathroom - 170 by 70 cm. However, the capacity is very good - 205 liters. Since the baths from BAS are mostly hydromassage, Atlanta is no exception - it is equipped with six jets - three on each side.

The mandatory set includes a standard set:

metal frame that guarantees the strength of the bath
bathtub legs that allow you to adjust the height of the bathtub and make sure it is stable
front panel that will close the space under the bathroom and give the interior a complete look
the necessary device for draining and overflowing

In terms of design and space optimization, this is a very simple medium-sized rectangular bathtub that is comfortable enough, but does not take up too much space and does not distract too much attention, so it will easily fit into almost any modern design.

Another example of a great bathtub is the acrylic bathtub, which is a corner asymmetrical bathtub. It is quite compact on its own - 160 cm long and 88 cm wide, and yet has a beveled corner, so it will become ideal option for small room. Although her style is quite simple and elegant, if desired, she can be distinguished - for example, create a visually separate space for her, with the help of decor elements, tiles of a different color or shade, additional shelves, etc. This bath, in addition to its ergonomic design, also has an interesting shelf for hygiene items, or even to sit on it.

The equipment here is standard - the same as in Atlanta. Capacity is also 205 liters. But there are more hydromassage jets - there are eight of them.

The last one should, of course, consider such a model as an acrylic bath bas lagoon, which is somewhat similar to the Florida model. However, the Laguna is larger in size - 170 by 110 cm. The capacity is also much larger - 295 liters. And the number of hydromassage nozzles is the same - eight pieces. The package is standard.

This bath is suitable for a medium-sized room, due to the fact that, although it is asymmetrical, it is still quite large and is unlikely to fit well in a small room. This model is also very conveniently equipped with a shelf for bathroom accessories and has an ergonomic design. At the same time, it will most likely be one of the main elements in the design of the room, this is facilitated by its rather large size. Therefore, it can be distinguished by directional colored lighting, or other decor options. Also, it would be a great idea to hang large mirror next to the bath, so that it expands the space, and the bath no longer seems to be something bulky.

In addition to the standard equipment, BAS offers its customers a fairly large selection of additional options. These additional features can be divided into several groups:

Aero and hydromassage lotions: various types of massage - dorsal, shiatsu, foot; air massage from 6 to 12 nozzles, hydro-aero-pipe massage.
Faucets: cascade mixer or even the whole set: spout, mixer, shower holder.
Backlight: different kind lighting and chromotherapy.
Pleasant little things: a headrest, armrests, products for cleaning the massage system or the bath itself, a pillow for the on and off buttons.

BAS provides its customers with really very wide opportunities for choosing a model and a set of bath equipment, plus you can choose a design curtain.

All photos from the article

Acrylic bathtub Riola

Modern bathtubs

Currently, the company's full lineup is represented by:

bass acrylic tubs;
curtains for them;
shower cubicles;
special shower enclosures.

30 modern models Bas bathtubs are available in classic rectangular, asymmetric and symmetrical shapes. All products are manufactured in strict accordance with advanced Italian and American technologies using original equipment.

Bath Fantasy

Popular Bass Models

How to choose an acrylic bath? Let's dwell on three unique models that will satisfy any requirements of the most fastidious users:

Bass bath Laguna - the maximum volume of water up to the protective drain at the top is 295 liters. The depth of the side asymmetric model in the center is 44 cm, and the height of the screen itself is 55 cm. The electrical characteristics of this bath are V - 220/240. Electrical wiring for powering electronic components is made using an RCD. The standard package includes:

metal carcass;
front panel;
convenient removable legs for installation of a bathtub and a drain device.

Additionally, this model is equipped with: a cascade, safety handles, special jets for a relaxing massage of the back and legs, a headrest, lighting and a pillow for the switch button.

Bass corner bathtub model

Bath Bas Alegra - this model has a smaller volume. Only 220 liters. But it fits perfectly into small bathrooms in "Khrushchev". The maximum center depth is 45 cm and the screen height is 56 cm. The classic equipment is the same as the previous model, with the same additions: headrest, handles, jets, cascade, button pad and backlight. This bathtub is very practical and easy to use, popular with young couples who can easily climb over a fairly high rim. The low price is perfectly combined with high functionality. This brainchild of Bass is a new generation acrylic bathtub with a comfortable corner seat made of durable materials.
Acrylic bathtub Bass Nicole is a fairly large bathtub. In addition to the shape and volume, this model is no different from the previous one. The maximum volume is 290 liters. It is easy to install in the space between two walls or in a small niche, which are still found in former communal apartments. This is possible thanks to two straight sides on both sides of the product. The bed has a rectangular shape, slightly elongated on one side. If necessary, this bath can be equipped with a vertical hydromassage stand and a special original curtain for this model.

Bathtub with two vertical sides

Please note: the power supply to all models is carried out through the RCD, so it is imperative to ground this device. Otherwise, the use of such a bath will be unsafe for humans.

Advantages of acrylic types of bathtubs

Recently Bass baths are gaining more and more popularity, but what are the main advantages of such devices?

Users and installers of plumbing accessories note a number of advantages of such baths.

Unlike steel and cast-iron counterparts, Bass acrylic baths are lightweight and have very high strength, which has been inaccessible to non-metal products for a long time.
Even unfilled with boiling water, they have a temperature that is pleasant for a person and does not allow the collected water to cool for a long time. This property is available through the use of acrylic, which has a very low thermal conductivity. On average, in 30 minutes the water will cool down by only one degree Celsius.
All such models of baths have ergonomic shapes, specially created close to the curves of the human body.
The acrylic surface is highly resistant to various mechanical damages: chips, deformations and scratches.
Acrylic is able to retain its original luster for many years and does not turn yellow, as happens with enamel counterparts. In addition, they practically do not slip, which makes their use safer for children and the elderly.
The surface of such baths is covered with a special antibacterial layer that prevents the development of various diseases and fungal deposits.
The water is collected quite quietly, which allows you to take a bath even at night, without fear of disturbing your family and neighbors.

Rectangular bath model

Tip: if you want to install a bathtub model with a hydromassage function, then first consider where the additional equipment is most optimally placed.

Conclusion

If it was decided to use Bas products, acrylic bathtubs will be purchased at the most reasonable price. And the number of various additional functions will turn the usual hygienic bathing into a real spa treatment.