Vodomet pumps are submersible multi-stage devices of the Russian company Dzhileks, designed to provide autonomous water supply to houses and watering plots.
Production is located in Klimovsk, Moscow region.
Equipment Features
The equipment of this brand is a range of household appliances of various sizes and different capacities, so you can choose a model that will provide the required amount of water.
Advantages of submersible pumps:
- work quietly;
- are small in size;
- do not "trouble up" water, unlike vibration ones;
- small size;
- low price;
- high efficiency;
- reviews of submersible pumps Vodomet are mostly positive - there are practically no negative ones, which is also a significant indicator;
- the ability to work in water with a significant amount of sand or clay (from 2 to 5 kg / m 3).
Water pumps Vodomet, designed specifically for Russian operating conditions, are of two types:
- wells;
- borehole (deep).
What are their differences?
Pumps for wells Dzhileks Vodomet are designed for use in relatively shallow wells (8-10 m), tanks or open water.
A prerequisite for the operation of such a pump is the sufficient width of the reservoir so that not only the pump, but also the float switch can fit there.
The water cannon pump for the well has obvious benefits before the well:
- larger ratio useful action, which means that, other things being equal, the submersible water jet pump for wells will have a greater performance than the water jet pump for a well;
- less sensitivity to dirty, "sandy" water;
- the presence of a simple float switch, thanks to which there is no need to install protection against "dry" operation;
- low price - from 9,000 to 13,000 rubles.
The submersible water pump for wells is smaller in size and is designed for extracting water from narrow (from 100 mm) and deep wells, lifting water from a considerable depth (usually the depth of wells is from 40 m).
The price of pumps for water jet wells is slightly higher than the price of well pumps - from 10,000 to 24,000 rubles.
About manufacturer's models
Submersible pumps Vodomet are available in several modifications, differing in power and other technical characteristics. Pumps for wells are marked as follows: pump Vodomet 55/35A, 55/50A, 55/75A, 150/30A, 150/45A, 150/60A.
Here, the letter "A" indicates that the pump is equipped with an automatic float switch.
Well pumps have the following designations: Water jet pump 40/50, 40/75, 60/32, 55/35, 55/50, 55/75, 55/90, 110/110, 115/115.
- The first number indicates the pump's maximum outlet flow (l/min). This flow rate is determined with open taps and no resistance to water movement.
- The second number is the maximum head (m), which develops the device with fully closed taps.
For example, the submersible pump Vodomet 60/32 delivers up to 60 liters of water per minute with a free spout, and when the water consumption taps are closed, it can create a pressure of up to 32 m. This unit costs almost 6800 rubles.
Based on the technical characteristics, we can say that:
- Water jet pumps with a maximum possible flow rate of 60 l/min will work most efficiently in water supply sources with a small flow rate (the amount of water that a source can give per unit time). In this case, the flow rate of the source must be no less than the performance of the pump, otherwise the pump may pump out all the water in the well (well), and begin to draw in silt or work “dry”, which can lead to its breakdown.In real conditions, a submersible pump Vodomet 60/52 at a price of about 8000 r can provide a consumption of 35-40 l / min (more than 2 m 3 / hour) - up to 4 consumer taps at the same time. Pump submersible water cannon 60/72 at the price of 10,000 r will give a stronger pressure at the same flow rate. Thanks to this, with the help of such a pump it is possible to move water over a greater distance.
- Pumps Vodomet with the highest flow rate of 115 l / min, provide for use in wells with medium and high flow rates, with a possible water flow rate of up to 65 l / min (about 4 m 3 / h). The submersible pump Vodomet 115/115 is one of the most powerful borehole pumps in the line. Its power is about 2200 kW, and the price is 16,000 rubles.
- Pumps Vodomet with a flow rate of up to 150 l / minute are necessary for the water supply of large houses. Such pumps can only be used in wells with a high flow rate, and their use is advisable when the water flow is high - more than 4 m 3 / h.
More accurate data for selection is easy to calculate on your own. The required pressure of the pump is the sum of the values of the required pressure in the taps of consumers, possible pressure losses in pipelines and the height difference between the source and consumers.
Roughly, the maximum pump head can be determined by measuring the distance from ground level to the water level in the reservoir:
- if the specified distance is less than 5 meters, then a pump with a head of up to 35 m is suitable. For example, a submersible pump Vodomet 55/35;
- if the distance is from 5 to 25 m, then a device with a declared head of 40 or 50 m is suitable. For example, a submersible pump Vodomet 60/52;
- if the distance is 25 - 45 m, you should choose a model with a head of 60 or 75 m. For example, a submersible pump Vodome 60/72;
- if the distance is from 45 to 60 m, it is better to choose a device with a pressure of 90-150 m. For example, a submersible pump Vodomet 115/115.
Device Reviews
Water pumps Vodomet are very popular with owners of private houses and summer cottages, therefore, various reviews have been accumulated about pumps for wells Vodomet.
Since the submersible pump for the water jet well is not deprived of attention and there are enough reviews about it - let's give a few for an example.
Maxim Viktorovich, 41 years old, Podolsk:
I have had a submersible water pump for the fifth year. Installed in a well at a depth of 25 meters. It works and works, the pressure is normal, only sometimes there is not enough water for everyone.
At first, I thought that my sandy well would "kill" the Vodomet well pump in a couple of years. I don’t know about others, but everything suits me. I'm thinking of looking at a more powerful model.
Maria and Alexander Semenov, Kursk:
Considered different variants for supplying water to the country house. They chose between Ukrainian Aquarius and Russian Dzhileks. Aquarius, they say, is very sensitive to sand, a remote condenser is also inconvenient. In general, we settled on submersible pump Water cannon 60/52.
It turned out that it gives 52 l / min only in ideal conditions, but in fact it comes out two times less. Nobody warned us about this. Would have known in advance — bought more powerful.
Mikhail Viktorovich, 61 years old, Ufa:
Reliable, good device. A submersible well pump Vodomet has been installed in the well for more than three years. It extracts water from eight meters and in a straight line about 35 meters more. Disadvantages - it is bad to connect through the RCD (often knocks out) and the cables are short.
About the device
The pump, completely immersed in water, works in very difficult conditions. Despite research, testing and the latest developments, these devices often fail. The causes of breakdowns are very diverse, but the main ones are:
- installation and operation of the pump in violation of the manufacturer's recommendations;
- voltage drops;
- dirty, sandy water;
- mechanical wear of parts of the mechanism - housing, blades.
In order for the Water Jet water pump to work properly for as long as possible, it must be installed correctly. So, when installing a pump in a well, it is necessary to mount it in a casing pipe with inside diameter not less than 100 mm.
The upper part of the pipe is closed with a cap to prevent foreign objects from entering the well.
To prevent the device from freezing in winter, a closing well is installed above the well, and the main pipe to the house is buried in the ground below the freezing level. The pump is installed so that it is lowered into the water, but not closer than 1.5 m to the bottom of the reservoir.
The schematic diagram of connecting the Water Jet pump is no different from the nuances of installing any other pump for a well - tied to a cable, it sinks to the bottom of the well. Attached to the cable with staples power cable and a hose through which water will flow.
After the device is at the bottom, the cable should be firmly fixed at the top.
A big plus is that do-it-yourself repair of the Water Cannon pump is quite possible. For a successful repair, you will definitely need spare parts to replace the damaged ones.
If "guilty" - circuit diagram water jet pump - the capacitor may have failed. If the water from the tap began to flow worse, the filter may be clogged or the hose is damaged (and the water simply flows back into the well).
The internal structure, the procedure for disassembling and repairing the Water Jet pumps are indicated in each instruction for the device.
However, it should be noted that it is not recommended to engage in such work on your own - despite the simplicity of the design, its disassembly and assembly (especially) requires some experience.
Equipment overview (video)
The range of products manufactured by GILEX includes several models of borehole pumps with different technical characteristics. This equipment is intended for use as part of domestic and industrial water supply systems with water intake from wells and boreholes. According to users, well pumps from JILEKS LLC are among the best on the Russian market.
Rules for choosing pumping equipment
Efficiency autonomous system water supply with forced water supply depends on the compliance of the technical characteristics of the pumping unit used with the conditions of water use. To do this, it is necessary to make a thorough analysis of all the nuances of the upcoming operation even before ordering the equipment. If you are faced with the question of what borehole pump it is better to choose, consider the following criteria:
- well flow rate and volume of water consumption, the maximum number of inclusions per hour;
- temperature of the pumped liquid;
- parameters of the existing electrical network;
- water quality, presence and size of mechanical impurities;
- possible immersion depth for the submersible unit.
One of the most popular borehole pumps of the JILEKS company is the VODOMET centrifugal submersible unit. This equipment is available in several modifications, which allows you to choose a device with optimal technical characteristics for specific conditions of use. Each model is distinguished by high reliability, unpretentiousness, efficiency, and has a high efficiency. When choosing, use the online consultation of our company's specialists. Channels for communication are given in the "Contacts" section.
They are submersible devices. They are multi-stage units, the operation of which is carried out through the use of centrifugal force.
Among the characteristic design features, which distinguishes the borehole pump Vodomet, can be distinguished:
- powerful engine equipped efficient system cooling;
- "floating" impellers;
- connection of the power cable to the top cover of the product, so that it can be installed in wells with a small casing section;
- built-in capacitor that allows you to use a three-core cable for connection.
The isolation of the hydraulic and electrical parts from the immersion medium is carried out by mechanical seals, which increase the life of the unit.
Oil-filled engine driving deep pumps for the well Vodomet, differs in stability of working parameters.
It is equipped with a protective casing that prevents oil from penetrating the cable.
Depending on the modification, downhole pumps Vodomet can be equipped with:
- automatic equipment that prevents the possibility of idling and protects against deformations.
- a removable filter, which is installed in the intake part and does not allow sand and dirt to be sucked in.
Operational Benefits
The borehole pump Dzhileks Vodomet differs in reliability, simplicity in use and service. Its other benefits include:- High efficiency, providing good performance and other technical parameters.
- The presence of protection in the form of a thermal protector, which protects the engine from overheating.
- Long service life. The pump for the well Water Jet Dzhileks can be used for a long time in intensive mode due to the special arrangement of parts and the use of high-quality raw materials.
- small size and weight, simplifying the transportation of the device. In addition, they help to reduce vibrations.
Pumps for water wells Vodomet are characterized by economical energy consumption and almost no noise during operation.
Cooling the motor with pumped water ensures trouble-free performance of the specified functions.
The relay, which protects against overheating, is placed outside the stator windings of the power mechanism. This makes it easier to diagnose breakdowns and carry out repairs.
Thanks to the use of "floating" impellers, Vodomet well pumps are not very sensitive to the composition of the pumped liquid and can be used to transport water with a high sand content.
Degree of protection IPX8 protects against ingress of moisture and is designed for operation in immersed state for more than 30 minutes.
Suggested range
Pumps for the well Vodomet are represented by several models. They differ in the nuances of design, technical characteristics and equipment.The line of equipment includes devices that can be used:
- for watering;
- for sources with low debit;
- for the organization of automatic supply.
Downhole pump Dzhileks Vodomet PROF - a classic downhole pump, with which it is very easy to organize a water supply system. It will need to purchase a hydraulic accumulator, a pressure switch and other components.
Borehole (well) pump Gilex Water Jet PROF A equipped with a float switch, which prevents operation without water. It turns off and on automatically.
well pump Water cannon "House" represents a more advanced version of the equipment, in terms of technical equipment.
It refers to automatic systems water supply and includes the following elements:
- well pump Water jet with a wire for connecting to the electrical network;
- storage tank with a robust steel body and a flexible synthetic rubber membrane;
- three-pin fitting;
- stop valves;
- check valve, excluding the flow of fluid in the other direction.
Using the remote control with a microprocessor, you can program desired parameters in the pipeline, depending on the operating conditions.
The Dom model is a modified water jet pump PROF, which has retained all the best properties of basic products and is equipped with several additional functions. Among them:
- protection against "dry running", voltage surges and overloads;
- smooth start, which reduces the likelihood of water hammer during commissioning and reduces loads.
Application features
In order for the Vodomet downhole pump to retain its functionality for as long as possible, it is necessary to strictly follow the rules of use recommended by the manufacturer. According to them, you should:- apply for pumping medium, the temperature of which is from +1 °C to +35 °C and does not go beyond the specified limit;
- avoid installation in sources where the distance to the day is less than 1 m;
- exclude the pumping of liquid containing more than 2 kg / m 3 of sand in suspension;
- do not allow borehole pumps Vodomet to use if a violation of the integrity of the wire is detected.
If you are going to use the Dzhileks Vodomet borehole pump for its intended purpose, you must first check the performance. To do this, it is connected to the power supply for a few seconds.
When using the Vodomet pump for wells, it is necessary to provide for the installation of a head that will close the top of the casing and protect it from foreign objects and groundwater.
To exclude freezing, it will be necessary to build a well with a cover, and lay the pipeline below the soil freezing level characteristic of the area.
In this case, the internal cross section of the pressure water supply should not be less than the same parameter of the inlet of the apparatus for water supply.
To hang the water jet borehole pump, you will need a steel cable that is pulled through the lugs in the cover. It must support the weight of the apparatus and the filled pipe.
During the first start-up, the possibility of getting a significant amount of sand should be taken into account. In such a situation, it is forbidden to turn off the unit: it is left to work until the source is “pumped” and there are no impurities.
Mounting example
A downhole pump, by definition, cannot be cheap. When working in a filter well, it is regularly exposed to particles of sand and silt, and water has to be delivered from artesian structures to a sufficiently high height.
In search of a reliable device at an affordable price, owners of private plots most often choose a water pump manufactured by Dzhileks. In this material, we will consider in detail the device and the principle of operation of the equipment, we will talk about the features of its selection and use.
Pumps "Vodomet" have a fairly wide range of applications. With their help, you can pump water from wells of various depths, as well as from wells and open reservoirs.
They perfectly cope with the autonomous water supply of a private house, are used for watering the site, garden, etc. In this case, the diameter of the well should be 100 mm or more.
The case is made of high quality stainless steel. The top point of the pump is sealed in such a way that during its operation sand and other contaminants do not enter the casing from above.
The pump motor is enclosed in a sealed glass filled with oil. This design eliminates Negative influence external factors and protects the engine from damage.
The design and dimensions of the “Vodomet” pump allow it to be installed in wells with casing pipe diameter 100 mm or more
The device is oil-filled, asynchronous, the motor rotor is squirrel-cage, mounted on rolling bearings. The motor is partially protected from overheating by a thermal protector built into the stator winding. In addition, an additional cooling factor is water passing through a special annular gap left between the housing and the motor stator.
To balance the external and internal pressure of the engine, a special membrane is used. This allows the motor seal to be unloaded. As a result specifications allow you to use the pump "Vodomet" at a depth of up to 30 meters. The top and bottom covers are arranged in such a way that all components of the device are in correct position about the central axis.
An important feature of the pump design is the presence of so-called “floating” impellers, which have the ability to run in. efficiency of traditional pumping equipment largely depends on the size of the gap that is formed between its moving and static parts.
The larger such a gap, the more internal fluid leakage occurs inside the device, and the lower its efficiency. During the operation of the pump, the moving elements are gradually erased, which increases the clearance, and the efficiency becomes even lower. The design of the "floating" impellers of the "Vodomet" pump gives them the ability to move in the axial direction.
Deciphering the markings of various models
The marking of the pump in the form of letter indices reflects the design features of individual models:
- "BK"– the cable length of this model is 1 m.
- "BUT"(automatic) - the presence of a float switch that prevents the situation of "dry running".
- "PROF"– pumps for wells without an automatic shutdown system.
- "M"(main) - equipped with a fitting that allows you to use the pump on the surface, as an element of the water supply system.
- "HOUSE"- additionally equipped with components for the organization of automated water supply of a private house.
- "H"- Availability electronic system automatic control pump.
Devices marked with the index “A” can be installed in wells or other structures where there is sufficient free space for mounting a float switch.
It is not enough to dig a well or a well. You should take care of how to supply water to the house, garden and other places. The water pump is designed for this purpose. The pump manufacturer is Dzhileks, a domestic leader in the manufacture of water pumps and related equipment.
Where can I use Gilex Water Cannon:
open waters,
wells,
wells,
various water tanks.
From the sources, water is supplied to the automatic water supply systems of the house, for watering the garden and garden, or for other purposes at the discretion.
Due to the layout features, the Gileks Water Meter pump can be placed at a depth of 100-150 mm from the water surface, and can also be used in a horizontal position. It is perfect for working in open and shallow sources.
How does a water pump work?
All Gilex models have a similar device principle. The stainless housing houses the pump part and the electric motor, which is washed by water. The rest of the parts are fixed with an intermediate support. The case is closed with covers on both sides.
The pump motor is filled with oil. The thermal relay is located outside the oil-filled cavity, which simplifies the repair of the part.
Depending on the model, the Waterjet pump may have different number repetitive steps. The parts of the device are divided into four components:
Cup.
The bottom of a glass.
Anti-friction washer.
Impeller.
The impellers rotate in the glass. And the cylinders are fixedly fixed between the cover and the plastic ring.
Device advantages
The manufacturer took care of human health. All parts of the Gileks water jet pump that come into contact with water are made of environmentally friendly and safe materials that do not affect water quality.
Some models of the Jilex Water Jet device have a removable filter. Its purpose is to protect the system from dirt, clay and sand. The filter extends the life of this equipment. If it gets dirty, you can clean it yourself. Also, the fence mesh has a large area. Water will fully flow even if the pump was lowered to the very bottom of the source.
The bottom cover has a conical shape. This design makes it easier to submerge the pump, it will not cling to possible casing connections.
The power cable can be pulled through the cover on top of the pump. Thanks to new design device it can be effectively used in wells with a small casing diameter.
The engine of the Gileks water jet pump is cooled thanks to the duct cold water between stator and housing.
Automation, which is built into the pump system, excludes its operation in idle mode. This function protects the engine from overheating, which prolongs its service life.
The thermal relay built into the pump motor determines the oil heating temperature and, if the norm is exceeded, stops the operation of the device.
Sun skirt: types and how to wear it Black sun skirt with a T-shirt how to wear
Ground bird cherry Ground bird cherry cook
Own business: production of chips
How to care for your skin in spring Face masks in spring
Seizures in the corners of the mouth: causes and treatment in adults and children