Putty on wood: choose the most suitable material. How to putty a tree: types, self-production, application technology How to work with putty on wood

Wooden coverings and wood products require correct processing. To increase the service life, strength, resistance to moisture and heat, wood putty of a certain type is used. The following describes the types of products, purpose, features of preparing the mixture with your own hands and how to use it.

Putty for wood

The functions of putty on wood are diverse. Qualitative composition gives a neat look, closes cracks in the floor or walls, eliminates bumps and other defects.

Purpose of putty compositions:

• Restoration of objects and surfaces made of wood.
• Elimination of defects, damage from poor-quality wood processing.
• Elimination of cracks on a large area (parquet floors).

Furniture restoration

The products can be of any color, while wood putties do not distort the texture of natural material, on the contrary, they emphasize the natural pattern. Among the range of products choose a tone to match the color of the floor, ceiling, wooden structures. The latter property allows you to achieve the imperceptibility of the putty on the material.

Requirements for putties:

1. High degree of adhesion to the base;
2. Homogeneity of the mixture;
3. No sagging and mechanical additives, so as not to create unnecessary problems during installation;
4. Minimum shrinkage. This makes it possible to apply the mixture in one layer, which means saving money;
5. Lack of crumbling and abrasions after drying;
6. Light sanding;
7. Easy to apply and fast drying.

Types of putty

Putty compositions have different purposes, composition, production methods and application features. To choose the right tool, you will have to understand its properties and purpose. Depending on the conditions of manufacture, the means are factory-made and home-made.

There are three groups of putties according to their composition:

• Adhesive.

Polymer adhesive putty

This group consists of putties made by hand. The composition contains oils, plasticizers and adhesive mixture.

• Nitro putty.

This group includes quick-drying mixtures, which are no longer made by hand, but in factories from resins dissolved by special means with the addition of cellulose ethers. The composition includes plasticizers and fillers. Before work, they are brought to working condition with special solvents (R-646, 645).

• Oil-adhesive.

This group of solutions includes oil varnish with additives in the form of drying oil or other fillers. These products include factory mixtures of the LSh-1 and LSh-2 brands, M-175,180 glyptal varnishes and filler paints.

Oil adhesive

Depending on the main component, the mixture is divided into the following types:

• Acrylic.

The main advantage of the product is the ability to extend the life of wood. In particular, the acrylic mixture is useful when coating a wooden floor with putty. In addition to this advantage, the tool has a low cost, a large selection, high adhesive properties and drying speed.

This group is also divided into subgroups:

1. Waterproof - in the composition, in addition to acrylic, there are also resins and latex materials.
2. Non-shrinking - in addition to high adhesion, they delight with the complete absence of shrinkage of the material. This tool is suitable for wooden structures (furniture) or flat surfaces from new wood (recently laid floor).

Acrylic putty

Manufacturers offer ready-made acrylic putty of the desired color. The composition of the water-based mixture includes acrylic polymers, pigments and active fillers. Acrylic blend is strong and flexible.

• Gypsum.

This type is popular due to its plastic consistency and good adhesion to the substrate. Can be used as a base coat or for finishing finishing works indoors.

• Alkyd.

A product based on alkyd resin, which is produced from vegetable oil, without water in the composition. Such a base gives elasticity and viscosity to the putty, which is ideal for finishing with enamels, oil paints or varnish.

• Colorless.

Putty without color

This putty masks damage to wooden products, restores wood flooring. The number and thickness of layers is selected according to the type of layer: base or finish. For the base layer thickness varies from 2-3 mm to several centimeters. For finishing layers required from 1 to 3-5 mm.

Putties from Tikkurila

Quality woodworking material is offered by the Finnish manufacturer Tikkurila. Under the Spakkeli Puukiti brand, they produce premium class wood products. The purpose of the material is alignment wooden walls, floors and other indoor surfaces. When Tikkurila putty dries, it repeats the natural shade of wood.

Types of putty Tikkurila Spakkeli Puukiti:

• Pine;
• Mahogany;
• Birch;
• White.

Tikkurila Spakkeli Puukiti

They produce a Finnish remedy in a container of 0.5 liters. The filling is 2 mm without cracking. A spatula is used for application. After Tikkurila of a certain type, the surface is painted, varnished or stained. After 5 hours from the moment of applying the Tikkurila mixture, you can start grinding.

DIY tool

Putty for wood is also made independently. For this you will need the following materials:

• Turpentine oil (60 g);
• Linseed oil (280 g);
• Powder pumice (30 g);
• Casein (20 g);
• Borax (12 g);
• Food gelatin (20 g);
• Ammonia (18 g).

Ingredients for self-preparation of putty

If you don't have pumice stone on hand, replace it with perlite or similar fine-grained filler. Ammonia is taken to prepare do-it-yourself putty 18%. For a quality mixture, you need to choose good ingredients and do everything right.

How to make a putty mixture with your own hands:

Stage 1. Mixing oils with pumice or other filler.

Stage 2. Dilution of the mixture with water in the calculation of approximately 300 g for the above amount of ingredients. In a water bath, a homogeneous consistency is obtained.

Stage 3. At a temperature of 90 ° C, they begin to intensively stir the solution, achieving uniformity.

Stage 4. After cooling, the selected surface is treated with the prepared mixture.

Another option for homemade putty:

Self-made putty has a limited service life - from 30 minutes to 1 hour.

In contact with

With all the advantages of wood, it does not have high strength and may look unsightly due to cracks, holes and other defects. Putty on wood allows you to quickly and efficiently hide any damage on the surface of a wooden product. This material will restore smoothness to the surface, help eliminate chips, knots, potholes, nail holes.

Wood putty is most often used to hide defects in wood. There are many types of these materials - they differ in composition, as well as in colors. Modern manufacturers make mixtures of various shades that exactly match different breeds wood (oak, walnut, pine, cherry and others).

Solvent putties

Solvent-based wood putty is a popular material among amateurs and professionals in carpentry and woodworking industries. This putty is considered the very first, all other types of mixtures were developed during operation and numerous experiments.

Among the main characteristics are high strength. But you need to work with such putties carefully - the composition is chemically unsafe and may have an unpleasant odor.

Water Based Mixes

Unlike solvent-based materials, water-based wood putty has a composition that is completely safe for health. It is easy to use, the material has elasticity. To remove excess, there is no need to use turpentine or acetone - everything is easily removed with a damp cloth. This a good option for walls.

These products dry out more slowly in the container, so their shelf life is longer, even if the packaging has been broken. Mixtures have high level adhesion and easy to apply even on polished surfaces.

• High efficiency. Any irregularities and defects can be covered with these mixtures. It is also possible to use them in the joints of floorboards.
• Environmental friendliness. The product does not emit any harmful substances even if it is heated.
• Moisture resistance and durability. Mixtures withstand all weather conditions, therefore they are optimally suited for finishing wooden facades.
• Resistant to sudden temperature changes. Puttied wood is reliably protected from fire.
• Elasticity. The product allows you to easily simulate any texture.

Related article: Features of acrylic putty and the subtleties of its use

All these properties will be fully manifested only after the material has completely hardened and hardened. It is also necessary to take into account the rules of application.

Oil formulations

Oil putty for wood is intended for external finishing works. The product is based on oils and solvents. These materials are excellent for finishing facade surfaces before painting.

After application and drying, a durable and waterproof coating is obtained, which is not afraid of adverse effects. If you use any other wood putty in outdoor work, it will a short time will start to crack and crumble. As for the palette, the industry produces these mixtures different colors with imitation of various textures of natural wood.

Oil putty on wood for outdoor use is produced and packaged in containers weighing from 0.5 kg to 15 kg. This is very convenient for different volumes of work.

Polymer putties

Polymer putty is an acrylic putty on wood. These materials are also very popular and are optimally suited for work of various types. This can be easily explained by the high operational characteristics– durability, elasticity characteristics, lack of shrinkage.

Due to the fact that the composition is based on polymers, as well as plasticizers, these wood putties are used for finishing both dry and wet rooms.

Acrylic putty on wood is not only moisture resistant, but also withstands temperature extremes and even strong mechanical stress. Therefore it a good choice for wooden surfaces exposed to stress such as parquet or solid wood floors. This is wood putty. internal works, but it is also applicable for outdoor use.

Among the main technical characteristics are:

• High elasticity. The mixture is elastic and is able to fill even big cracks and pores in wood. These materials are often used to seal cracks in parquet boards.
• No shrinkage. It is enough to putty the wooden surface once and the shape of the surface will be preserved after complete drying.
• Durability. Depending on certain conditions, the service life of the puttied surface will be from 3 to 10 years.
• Price. These wood products cost more than oil-based or water-based products, but the price is fully paid back in the first year. When other coatings crack and begin to crumble, the polymer mixtures will serve.
• Colors. The industry produces much more colors and shades of wood.

Related article: Selection and application of putty for drywall joints

On the video: features and characteristics of acrylic putty.

Other types

Also, along with the above described materials, there are others. These are glue-based putties, nitro putties, gypsum mixes, latex-based materials. Before answering the question of which putty is better, consider their features:

• Nitro putty. It is a mixture based on products of cellulose origin. The resin and cellulose ethers are diluted in solvents during production and then mixed with special plasticizers.
• Gypsum mix. Gypsum-based putty is now practically not used, but it is still being produced, as it has good adhesion, is versatile and safe. A serious drawback is the need to cover the entire surface, and not just the defect.
• Putties for wood for painting. The paint is not able to mask surface defects and even more - the paint focuses on this. Therefore, before painting, it is worth puttingty on the surface. As for the composition, this is more of an application technology, and not a separate type of material. For aesthetics, not paint is applied on top, but a transparent varnish.

Putty of own production

Along with industrial compounds, which can sometimes be expensive, craftsmen also use homemade wood putty. Such finishing mixtures are no worse than products from well-known manufacturers. At home, you can prepare putty on an oil-glue or adhesive basis. How good a homemade mixture will be depends on the quality of the ingredients.

So. How to make putty? The most popular recipe for a homemade putty composition is when chalk is considered the main ingredient. Such putty is prepared as follows: take equal shares of crushed chalk and PVA glue, mix thoroughly. The result is a creamy mass. If necessary, you can dilute the mixture by adding one or another ingredient. Small wood chips are also added.

Among the disadvantages of this chalk mixture is the drying time. Do-it-yourself chalk putty on wood will dry for at least 24 hours.

There is another mixture that is easy to make yourself: you need to dilute the chalk with a water-soluble acrylic varnish. The result is a liquid paste. If the paste is too thick, you need to dilute it to make it thinner, add more water.

Wherever you live, in an apartment or a private house, one day you will face the problem of repairing window frames, doors, floors. Of course, you can replace windows and doors with plastic ones, but natural wood is stylish. Moreover, it is now fashionable to leave window frames outside natural, only covered with decorative varnish. Of course, you can invite specialists, or you can repair everything with your own hands. And it's not even about the cost of the work, just done on your own, it is more reverently guarded and delivers a lot of different emotions. Today our topic will be the repair of wooden surfaces. Before updating your windows, floors with paint or varnish, they need to be prepared and puttied.

Wood putty can be done independently

Why is it necessary to putty wooden crafts?

Wood putty closes up large and small cracks, eliminates other defects present on the surface.

Forms a bonding layer between the wood and the coating (paint or varnish).

Increases resistance to moisture, extending the life of the repaired wood surface.

Used for puttying natural wood and processing different kind coatings of laminate, fiberboard and MDF.

Wood putty may be required in case of cracks.

Manufacturers of putty mixtures

Our stores offer the widest selection of all kinds of wood putty. These are mixtures of domestic and foreign manufacturers. They make a mixture of gray - white or shades to match the color of the tree. Packed in containers of various volumes. "Orion", "Perfect", "Extra", "Rainbow" represent high-quality putty of our manufacturers. It is well applied, residues are easily removed with acetone or turpentine. They meet modern requirements and have an affordable price. There is a universal one for concrete and wood, for example, “Tex”. But if the amount of work is small, then you can purchase a more expensive imported mixture. For example, "Berger" - resistant to fire. "Triora", "Tikkurila" - made in Finland, very pleasant to work with, but much more expensive.

Present on the market a large number of putty on wood, choosing the right one is not difficult

Variety of types of wood putty

Acrylic wood putty is used for leveling floor surfaces made of natural wood, laminate, chipboard, parquet, where there are small cracks and flaws. Elastic, gives a smooth, smooth surface resistant to water, chemicals, fire. The layer should not exceed 2 mm. It does not seal large cracks and often needs to be renewed.

Polymer (latex) putty mixture. It is used for interior work, because it contains non-toxic components. It is used for working on natural wood and laminate. Dries very quickly and is environmentally friendly.

Acrylic putty on wood is used to level the floor surfaces

Epoxy putty for wood. Its advantage is that it is resistant to moisture. It is applied to external putty (windows, doors). Feature of the mixture: the composition includes two components that are mixed immediately before application. Read the instructions on the package. Another plus of this putty is that it is resistant to chemicals. Only after applying a layer of the mixture, it is impossible to treat the surface with stain, which, when exposed, does not burn through this putty, and bald spots (whitish spots) appear during further processing.

Epoxy putty is moisture resistant

Oil mixture - its composition practically does not differ from home putty (chalk, drying oil, varnish). Resistant to water, increases the strength of surfaces, extending their service life, can be used for indoor and outdoor use. Dries for a long time.

Gypsum putty. It has long been known and the most used mixture. Easy to prepare and cheap, afraid of moisture. Although it passes steam well, therefore frequencies are used in kitchens.

Nitro putty for wood - it contains organic solvents, petroleum resin, etc. Waterproof, not afraid of chemicals, odorless. Does not shrink and cleans well when completely dry.

Oil putty on wood can be used for indoor and outdoor use

Do-it-yourself wood putty for indoor and outdoor use

When you need a very strong mixture or a large amount, do-it-yourself wood putty is the most profitable option. There are several ways to prepare it. Consider the simplest and most popular, they include available components.

1. Add PVA glue to ordinary ground chalk. We mix this composition well, independently achieving the desired consistency. If you have very large gaps on the windowsill, then small sawdust is added. The mixture needs to stand for several hours for the sawdust to swell. Such putty dries for a long time, but is very durable and economical.
2. We produce approximately the same, mixing ground chalk and water-soluble varnish. It can be diluted with water. And for outdoor work and in non-residential premises, you can use a composition of chalk and nitro-lacquer (it has a specific smell and it is better not to use it in an enclosed space).
3. The classic recipe for homemade wood putty: you need to take 280 g of regular linseed oil, turpentine oil 60 g, pumice powder 30 g, mix thoroughly, then add to this composition: gelatin 20 g, borax 2 g, ammonia 18 g, water 300 g. In a water bath, all the time, stirring, bring almost to a boil. When the mixture has cooled, it is ready for use.

Now you know how to make wood putty at home with your own hands. But you can not store a self-prepared mixture for a long time. Residues must be disposed of after use.

We turn to the work itself on puttying wooden surfaces. It consists of several stages.

You can make your own wood putty

Operating procedure

The first stage is the preparation of a wooden surface for work. Before you prepare the room, free the surface to be treated and everything around. The window frame on the street does not require special preparations, but do not forget about safety precautions when working at height. Need a second person for insurance. Put on a mask and gloves. It depends on what you are going to putty, how you will clean your wooden surface.

Before puttying, the tree must be prepared

Tools for preparatory work:

metal spatula (helps to remove old paint from the surface);

sandpaper (to clean the surface);

solvent (there are mixtures that corrode the paint);

building hair dryer (it is possible by heating the surface to facilitate the removal of the old coating);

pliers - remove nails or staples, if any (otherwise rust may appear after staining);

brush (to apply the solvent);

brush and kitchen sponge (for residual cleaning of the smallest particles and dust).

Before starting work, prepare all the necessary tools

The second stage is the primer. In order to protect the wood from rotting and fungus, to improve the bonding of the surface and the future coating (paint, varnish), it is necessary to prime it. There are special primers based on acrylic, alkyd or mineral. We choose a mixture on the basis that corresponds to the putty. For the process we need the following tools:

container (under the primer);

brush or roller (for application).

Carefully prime the entire surface to be painted with a brush or roller. We give time for everything to dry.

The tree must be primed to protect against fungus

Main stage. With a rubber spatula we apply putty on a wooden surface with a primary layer of 2-3 mm. Let's dry. We clean the surface. We putty again, with a more liquid mixture. Layer thickness 1.5 mm. Putty on a wooden surface requires diligence and patience. But the effort you put in will reward you with a perfectly glossy surface ready for painting.

Tools:

spatula rubber different sizes(sold in a set)

airbrush (applies liquid mixture on parquet)

sandpaper (surface sanding)

Putty must be applied with a rubber spatula

Little tricks

If the gap or crack is very large, it must be repaired with a mixture of sawdust. We use homemade wood putty. We prepare a mixture of chalk, PVA glue and small sawdust. We apply, dry and apply sickle (self-adhesive nylon mesh, sold in small bays 6-8 cm wide), apply the mixture with a layer of 2 mm. After drying - once again a thin layer.

If the gap is too large, it should be repaired with sawdust

In order for the color puttying on wood to differ as little as possible from the color of the surface, add color (a liquid coloring element, the amount of which will determine the color saturation of your mixture).

If the mixture is not suitable in color, you can add color to it.

In old doors and window frames made of wood, knot cuts often rot. It is better to drill them, fill them with glue for wood or PVA. Insert the cut out wooden chopstick and putty with a thin layer. Sand down.

Wooden surfaces on the street are first treated with an antiseptic, impregnated with drying oil. Apply putty to the prepared surface. Sand after drying. To cover, we take varnish or paint.

Video: Wood putty

With the help of wood putty, you can bring old window frames, worn-out parquet, other wooden products to life, prepare new items for further decorative trim. Manufacturers of putty on wood offer us a large selection of these materials. Which is better to choose - the decision is yours.

After all, the choice depends on many factors: where the material will be used - outside or inside the room, what effect you expect to get on a wooden surface.

Tip: For external surfaces, such a putty is needed, which tends to withstand exposure to moisture, the sun, temperature changes in the street. And for processing wood inside the house there are no such strict requirements, but there are some peculiarities in use.

Choosing wood putty

When choosing a material for work, you need to be guided by the following characteristics of putty:

1. The degree of adhesion - the properties of the setting of the composition with the surface.
2. Structure and consistency - the more elastic the material, the easier it is to work with.
3. Environmental Safety.
4. Drying time - the faster the better.
5. Uniformity of a consistence will allow to receive better surface.

The purpose of wood putty for interior work is as follows:

• Protects wooden products from moisture, which contributes to the extension of their service life.
• The ability to hide existing defects, chips and irregularities on the surface.
• After drying, a transparent layer of putty retains the appearance of wood on the surface.
• Material for floor coverings eliminate all irregularities and protect from pollution.

Varieties of putty

Consider what types of putties are by component composition:

1. Gypsum is perhaps one of the most popular putties due to its ease of use and its properties. This material is almost universal due to its plastic consistency, which allows excellent adhesion to the treated surface. This mixture is used both for starting processing and finishing. Among the shortcomings can be called sensitivity to moisture, so its use in rooms with high humidity and on the street.
2. Epoxy. It contains petroleum resins, organic solvents and plasticizers. Its main characteristics are resistance to water and chemicals, it does not have a pronounced odor. After drying, the surface treated with such a composition can be sanded. The only drawback is that if subsequent processing involves the use of stain, then such putty cannot be used.
3. Oil mixture - this composition contains drying oil, chalk and varnish. It has good moisture resistance due to drying oil, which allows it to be used for processing facade walls, window frames. Of the minuses can be called - long time drying agent after treatment.
4. Adhesive - based on PVA glue, drying oil and chalk. Allows you to work both indoors and outdoors. Differs in resistance to moisture. Usually wood structures are processed - doors, windows and other structures. It can be used for processing wooden surfaces, for example, in the bathroom, bath or kitchen.
5. Water-based - distinguished by its environmental friendliness and safety in use. Easy to use: very plastic and elastic, without a strong odor, has high adhesion.
6. Polymer putties are available in two types: on an acrylic and latex base. They are distinguished by excellent performance characteristics and therefore are popular. Although their price is much higher than the putties we discussed above.

Do-it-yourself wood putty (video)

What is the best composition?

So, acrylic putties are used mainly for interior work, but it is also possible for exterior, under certain conditions. They are resistant to temperature changes and mechanical stress. They are used for processing a wooden floor, sealing flaws in linoleum.

Main specifications such:

• The high elasticity of the mixture allows you to fill gaps and cracks small sizes, often used to eliminate gaps in parquet boards.
• After drying, it practically does not shrink, which allows you to maintain the shape of the surface using just one layer of putty.
• Durability is ensured subject to the rules for operating the surface.
• A wide range of colors and shades under the tree.

Latex putties are a multi-component mixture. In its composition: latex, plasticizers, antiseptic additives, etc. They have practically no flaws and have excellent properties, do not have a strong odor and do not crack after drying.

1. Due to the plasticity of the mixture, it is easy to work with it.
2. The ability to apply a thin layer due to its supple structure.
3. Does not shrink after drying, which will help to avoid cracking of the putty.
4. Has excellent adhesion.

Of the minuses, one can name sensitivity to low temperatures and a relatively high cost, which is justified by the result of the work. Putty on wood is produced both in cans and in buckets and tubes of various sizes.

Using Ron's alkyd putty, prepare the wooden surface for further painting or varnishing and enameling. The alkyd resins contained in the composition make the mixture elastic and viscous, which makes it possible to cover the surface qualitatively and easily.

Acrylic-based putty contains pigments that allow you to get a shade close to the color of natural oak, birch, pine, beech, walnut. Its special composition formula will allow processing various surfaces from wood and chipboard and avoid shrinkage of the mixture after drying.

When working with wooden surfaces, you can not do without putty. It helps to hide bumps, pits, depressions that can remain even after the most thorough grinding. During restoration, during decoration wooden furniture she needs. It is also needed in order to hide the joints between the wooden elements of the floor.

The putty must have such characteristics of adhesion, hardness, softness, degree of moisture absorption that correspond to the properties of the tree. Otherwise, getting deep into the wood through a gap in the array, for example, it will turn into a deforming factor, splitting the board. It is always worth buying a special putty.

Why are there so many varieties of it?

There are different types of wood putty, there is plenty to choose from. It is important not to get confused, buy the best one. You can accidentally apply it incorrectly, make a mistake, if there is no skill, a diploma on acquiring a construction specialty too. Errors will have to be eliminated, and this is an additional deformation of the original structure.

If the putty is not particularly suitable, after a few months you will have to get to work again. This cannot, of course, continue for long. wooden elements will soon fall into disrepair simply.

Furniture restoration, repair, decor creation is a creative process. The amateur has to cope with the task. This, of course, is taken into account by manufacturers when creating finishing materials. The work will be argued, the result will be wonderful.

It will not be difficult to fix defects, the wood will not suffer if you spend a little more time on purchases, study those options that are on sale, new items and long-familiar positions. What is the best wood putty? This will tell the composition, properties, characteristics.

Acrylic putty

Requires delicate handling, calls for careful action and fragile, thin sheet plywood, and timber. natural materials help create a magical atmosphere, you don’t want to break this connection, change the surface relief.

Acrylic putty is elastic, ideal for repairing such a defect as small cracks. Easy to apply in a thin layer. Water-based, environmentally friendly, safe. It is used to process smooth wooden surfaces and to eliminate gaps at the junction of parquet boards, between boards.

The classic version of acrylic putty is white paste. It is sold ready-made, you just need to mix it and get to work. White color, perhaps, can be a minus. It is completely irrelevant when you want to emphasize that the material is still wood.

In this case, you can choose a novelty, an invention recent years, tinted acrylic putty. It is not a problem to find the appropriate shade by looking at the photo of the wood putty.

Latex putty

This variety is characterized by high rates adhesion - the ability to stick to a surface. Perfect fixation is also ensured by softness. Latex putty will not crack when hit, pressed on two different elements of a single structure made of wood.

In other words, parquet will last a little longer, and you can safely lean on a tabletop made of two boards. Also, as in the case of acrylic putty, you can choose the appropriate shade, which is also a significant advantage.

Such a characteristic of putty on wood as a high degree of adhesion is very important when working with inclined surfaces. Latex putty will not drain if joints are processed between wooden boards located on the ceiling.

It can be used instead of glue. It is convenient, practical, profitable from a financial point of view, although it is more reliable to use glue, of which many varieties have also been invented.

Epoxy putty

This variety is based on epoxy resins- safe, with unique properties substances. It has a high degree of resistance to moisture. This is the perfect wood filler for outdoor use.

With its help, you can fix defects in a wooden window frame, fence boards, wooden swing. It is even used for the restoration of yachts and boats.

If you need wood putty for interior work, most often they choose acrylic. Epoxy is a little more difficult to work with, it has a different consistency. It takes more effort to mix the mixture in the jar.

On the other hand, it does not dry out so quickly. Suitable for doors and floors. It also cannot be stained, so sometimes it is not relevant.

Oil putty for wood

This putty has a simple composition and wonderful properties. It is resistant to moisture, copes well with its main task - fills cracks and other irregularities. It is easy to apply and sand.

It is used both for outdoor work and for indoor, but dries for a long time. It is necessary to pay attention to the weather if the surface of the fence boards is leveled, for example. Various shades of oil putty for wood are available.

Polymer putty

The water base makes working with polymer putty simple. It is easy to do everything, anyone can cope with the task. It doesn't fit in some cases though. It should not be used on very soft woods such as cork or very hard woods such as oak.

It is valued for the fact that with it you can forget about the shrinkage of the putty layer. This is very good quality. To eliminate large gaps between the boards and not only for this, it is worth choosing it.

Photo putty on wood