How to make a dressing room from a pantry. Do-it-yourself spacious dressing room from the pantry in Khrushchev Wardrobes in the mother-in-law's room

The most convenient, perhaps, a device for storing things is a dressing room. After all, it's really great when all the details of the wardrobe are in one place and you can immediately assess how well the set you have just chosen is combined, and not run from room to room - take it, try it on, see it. Moreover, you can make a dressing room in a very small area: the minimum is 1.5-2 square meters. Even in a small apartment, it is possible to shield such a space. Moreover, it has been noticed that it is more convenient to use them if the dressing room is assembled with your own hands. It's simple: no one knows your habits better than you and will not be able to arrange things in the right order. So, we proceed to the independent creation of a dressing room.

Dressing room sizes

Our realities are such that most people live in small apartments, where every centimeter counts. Therefore, size issues often play a decisive role. The smallest dressing room can have an area of ​​​​1.2 - 1.5 square meters. meters. This is a rectangle with sides of 1.5 * 1 meter or so. Also, a small dressing room can be corner - this option is even more spacious than a similar rectangular one: with an equal area, the length of the sides along which shelves and storage systems can be placed will be greater.

The smallest dressing rooms: 1.5 by 2.5 m and 2 by 2 m

A rectangular mini-dressing room with one-sided placement of things should have a width of at least 1.2 m, with a two-sided one - at least 1.5 m. The depth should be such that it is possible to “enter” there. In this, dressing rooms, basically, differ from sliding wardrobes, and also in the ability to install any doors.

Ventilation and lighting

Even in mini-dressing rooms, and even more so in large ones, ventilation is necessary: ​​in a closed room, a smell of mustiness quickly appears, which no perfume can mask. Therefore, even when planning, find a way to make ventilation in the dressing room.

The principle of its device is no different: in the upper part of any of the walls, preferably further from the door, an exhaust hole is made where the fan is inserted. The inflow is provided either in the gap under the doors or in special inlet openings located just above the floor level. They are covered with decorative bars. The outlet of the ventilation duct must be in common system ventilation, you can take it outside with plastic boxes or under the roof of a private house. The air exchange organized in this way effectively maintains the normal state of things.

Principles of organization of ventilation of the dressing room through the bathroom

When choosing a fan, you should pay special attention to the noise level. Since walk-in closets are often made in or close to bedrooms, noise should be kept to a minimum. It can be controlled by automation or turned on / off by conventional or.

Lighting should be bright. Firstly, it is necessary to quickly find things, and secondly, dressing rooms are often used as fitting rooms in order to immediately see how the selected items fit together. In this case, a mirror is usually placed on the door or mirrored doors are made. In this case, the light should be directed not only to the shelves and storage systems, but also to the fitting area.

You can use lamps of any type, but it makes sense to make them turn on from motion sensors. They opened the doors - the lamps lit up, there was no movement, they turned off. There is another option for hinged doors there are lamps with buttons that light up when the door is opened and turn off when they are closed.

Where to do

Even in small apartments there are “appendicitis” that cannot be used normally. Here in such a place you can make a dressing room.

Another popular option is storage. In this case, everything is generally simple. You remove everything superfluous, change the doors and install the appropriate content: racks, racks, baskets, shelves.

If there is nothing like this in the apartment, they fence off part of the room - the end or corner - you need to look at the layout. The corner dressing room is good because it allows you to use the most difficult areas to equip, namely the corners. Especially if there are closely spaced doors in two adjacent walls. This zone is considered “dead”: you can’t put anything there except for a small corner shelf: everything will interfere. Approximately the same option - two windows or a window and doors.

If the area turns out to be too small, it is possible to increase it a little, making the wall not even, but with the middle extended a little. The area of ​​\u200b\u200bthe room will not decrease much from this, but much more things can fit.

They are also made on the loggia - by making part of the glazing opaque or by building a wall. Only here you can’t do without warming - it’s unpleasant to put on cold things in winter.

The second option is suitable for wide loggias. In them, shelving can be placed along a long wall.

In the corridor or hallway, a corner or “appendicitis” is also blocked out, if the layout allows. Here everyone can decide only on the spot: there is a place for this or not.

Most of all, a dressing room is appropriate in the bedroom. It’s just the best place to store things: in the sense that it’s more convenient to dress here. Therefore, for these purposes, part of the room is fenced off. In this case, this technology is needed for a long time and has been worked out to the smallest detail. It won’t take much time even in the absence of experience: a maximum of two or three days for assembly and finishing.

If you make a partition from GKL or GWP in accordance with all the rules, you will need double cladding, and these are “eaten” centimeters, or even meters of area. Therefore, most often they are sheathed only on the outside, but with two sheets with overlapping seams. When assembling the frame, do not forget to make reinforced racks for fastening the door. With a single cladding, bare profiles remain inside, but it is convenient to hang shelves-baskets for things on them. If you plan to do so, then take them with a thick wall: so that they normally hold weight.

The partition can also be made from or, slabs. This is an option for those who do not like to mess with putty. But you need to choose a lamination that will fit into the interior without any problems.

Doors for dressing room

What is good about a do-it-yourself dressing room is that you can put any doors: sliding, like "coupe", accordion, ordinary hinged, hinged on rollers. You can even do with them completely bases. This option is called a wardrobe-rack, but then everything will have to be kept in perfect order: everything is in plain sight. Most a budget option- thick curtains or something like a Japanese curtain.

If the front wall is large, part of it can be stationary, part - occupied by doors. In this case, stationary walls can also be used somehow. If desired, the doors can be made in full width, or consisting of fragments.

A dressing room option in the attic: a side part with a low ceiling is occupied under it. Full width doors for easier access

The design can be anything, as long as it fits into the look of the room. If desired, they can be made to match the walls so that it is not visible, or you can make them bright and conspicuous.

Arrangement: filling and storage systems

If the area is limited, it makes no sense to make furniture made of wood, MDF or chipboard in the dressing room. They take away precious centimeters of area, and even interfere with the movement of air. Another disadvantage: it is problematic to remake something.

Furniture of the "standard" type takes up too much space

Recently, the general trend is the installation of lightweight metal storage systems. They are modular, assembled on special racks. Racks can be attached in two ways - to walls or to the ceiling and floor: different manufacturers make different systems. And already on these racks they hang everything that is necessary.

Racks can have notches along the entire length, which makes it possible to install any element at any height. These are the most mobile systems that can be modified easily and simply - simply by hanging from one row of notches-hooks to another, changing the height of the shelves, baskets and other elements at random.

There are racks of rectangular section, with grooves cut on both sides. In these grooves, the necessary components are attached to the clamps.

Please note that there are different shelves and drawers - made of wood or wood materials, metal - chrome-plated or painted. They can be retractable, they can be placed one on top of the other or on shelves.

All these systems are sold: racks and a list of various components. But they are mainly produced in European countries, because the price "bites". An economy version of wardrobe equipment can be made independently from a round chrome-plated furniture pipe and various fasteners for it. It turns out that this furniture is not as mobile as we would like, but it costs significantly less.

Appliances for placing clothes

In addition to standard and not very drawers, shelves, there are interesting special options. For example - skirts or trousers. Special guides on which the cross bars are fixed, sometimes there are clips on them. They allow you to hang skirts / trousers evenly and not be afraid that they will fall. It is convenient if such a hanger extends, allowing you to inspect all the contents.

One of the options for filling the dressing room is a bracket for skirts or trousers.

This device can be replaced by a simpler, but much cheaper one - a hanger with crossbars located one under the other. This is not so convenient, but it allows you to organize your clothes just as well.

There is a retractable design for ties, only it, as a rule, is oriented differently and extends in length, although not everyone likes such a system, but rather folded into drawer cells.

There are several ways to place hangers. The simplest is pipes, more economical (in terms of space use, but not in terms of money) is tie-like retractable brackets.

Another device is a pantograph for clothes. This is also a pipe, but capable of descending. A kind of lift for clothes. Such a device allows you to use the space up to the ceiling, and not to the detriment of your comfort. It can be attached both to the side walls (the more common option) and to the wall. A rod-handle is attached in the middle of the pipe, pulling which you lower it to a horizontal position. The carrying capacity of such devices is usually small (up to 18 kilograms), therefore they are used for light - in terms of weight - clothing.

Furniture pantograph - for light (by weight) clothing

Shoe storage systems

Often there are problems with storing shoes: some of them have dozens of pairs, so it’s just right for them to arrange separate dressing rooms. But among the standard sets of equipment there are several interesting ones for storing shoes.

Let's start with the retractable system. She is in IKEA. Pins with modules for shoes, mounted on a movable frame. Convenient, compact.

There are mini chests of drawers that do not take up almost space, but are hung on the walls, there are hanging organizers that are easy to place on a horizontal pipe.

These are mini chests of drawers on the wall.

In general, for shoes there are many interesting ideas, allowing you to place it compactly and at the same time conveniently. Some are in the photo gallery.

Such "swivel" drawers are very convenient not only for shoes, but also for small things and linen Way to store boots - on hangers with clothespins

There are some very inexpensive options. For example, seasonal, the one that is currently in use, can be stored on a grid with rearranged hooks or wire shelves. You've probably seen similar ones in stores. This is a mesh or perforated panel on which hooks / shelves are hung. Convenient: you can move under any type of block, make more or less distance.

Economy shoe storage option - mesh with hooks and shelves

Hanging such a grid is not a problem - even on a wall, even on the side surface of a cabinet or door. Hooks and shelves simply cling to the crossbars. This option is ideal when there is a shortage of money and space. If you like the idea but need something more presentable, make or find a perforated metal frame shield. Hooks are also inserted into it with a bang.

Modification - shield with hooks

In general, when arranging a dressing room and limited budget it is worth looking for storage systems not in furniture stores- on-line or off-line. Better take a look at the sites that sell shop equipment. There are many interesting devices that save space: stores also try to display the maximum amount of goods on the minimum area. For example, such here racks for footwear.

If you attach wheels to the first, you get an excellent retractable system. The price for such equipment is much less than for similar equipment, but which is sold in furniture stores.

Making a wardrobe project

There are a lot of ideas for equipment and storage systems, as you can see. But so that it doesn’t turn out that the purchased great thing just doesn’t get into your wardrobe, you need to draw a plan on which you indicate all the dimensions and dimensions. It is drawn to scale, then on it you mark out those parts that must be mandatory. They are drawn in the same scale. If everything “fits in”, armed with dimensions (you have them, or you can measure in the figure and, using the scale, calculate the real values), you can go to the store to choose systems.

There is another approach. Find out the dimensions of the devices and systems you like (mounting dimensions), cut them out to scale from cardboard or thick paper and try to put it all together. If it works, great, you can buy it. No, look for other options. As a result of your efforts, you should get approximately the same layout as in the photo.

To make it convenient to use the equipment and get things, it is necessary to maintain the following distances:

• minimum distance from shelf to shelf:
  • when storing things - 30 cm;
  • when storing shoes (without studs) - 20 cm;
• shirts, jackets, jackets - 120 cm;
• trousers:
  • folded in half - 100 cm;
  • in length - 140 cm;
• compartment for outerwear - coat - 160-180 cm;
• under dresses - 150-180 cm.

At the very top, we allocate space for clothes of a different season or rarely used things. Often there is a place for a vacuum cleaner below, and a built-in ironing board is made in one of the cabinets.

For those who like to work with their hands, here are a few diagrams with dimensions so that you can equip your dressing room with your own hands (at least partially).

Drawing shelves for shoes with dimensions

Shoe storage system made of plastic pipes…

Quite a few pantries have been left in the secondary housing stock since Soviet times. Placing a dressing room in the pantry will best solution. Although the area is not large, it is possible to place a fairly roomy and functional product here.

There are many types of this furniture, but the most common of the chipboard. This is a universal structural furniture material that allows you to create almost any furniture according to your parameters.

The flexibility and versatility of laminated chipboard gives us the opportunity to design furniture exactly to the needs of customers and take into account the size of things, their number, even the growth of customers. Our designers take into account all these factors and create an individual and unique project.

Order a dressing room in the pantry

To order a dressing room in the pantry, you will need to call a measurer and get a measurement of the room for the installation of the product. Right at the installation site, a specialist will advise you on the dimensions of the product, functional areas, the best option storage of things.

In the salon of the company, a 3D design project of furniture will be created for you, they will offer various options internal layout and accessories. We will take into account all the features of your premises and storage, contact us!

A pantry is a room in an apartment that is found in the layout of old houses. It is used by many for its intended purpose: unnecessary things and those that are rarely used are sent there. There is an idea of ​​​​a pantry, like a closet, for storing non-perishable products and canning products. But in the conditions of a lack of free space in the apartment, the storage room is also used in another transfiguration. A dressing room from the pantry is an option to solve the problem of lack of space in small apartments.

For residents of houses old building, for example, Khrushchev, it is important to rationally use the home. The need for free space, most often, comes first here. And things, as you know, occupy the main part of the room, especially if there are a lot of them. If you collect everything in one place and sort it, then part of the previously occupied space will be freed up, and a new room will appear in the house. This function, among others, is taken over by the dressing room. In this case, the room plays a practical and aesthetic role.

Creating a practical dressing room

The right location

If it is possible to choose a place for a future dressing room, for example, during construction, then the most advantageous option would be a location near the bedroom or bathroom. In the case of a small apartment, the storage room will become a place to create a dressing room. After all, it is located, most often, in the corridor, which borders on all the rooms in the house.

Competent lighting

If natural light does not penetrate the dressing room, then it is worth resorting to elements of artificial lighting.

Of all the options (chandeliers, floor lamps, floor or table lamps, lamps and built-in light bulbs), to save space, it is better to use built-in light bulbs based on LEDs. This type is practical and versatile, and does not take up much space. Moreover, they are embedded in ceiling structure, and in walls, in closets in the pantry or shelves. Built-in lights never get in the way of trying on outfits or rearranging things.

doors

The doors in the interior of the dressing room are made either bright or hidden from prying eyes. Moreover, this technique can be used in conditions of both spacious and small rooms. The door opening mechanism is chosen based on the goals of zoning the total area.

You can choose compartment doors or swing doors that maximize usable space. An advantageous option would be to use three-leaf mirror panels as a door, with a pivoting element in the middle. Thus, when closed, the dressing area will be hidden from the outside.

Ventilation

The dressing room is a closed room, and, as in any closed room, there is no natural circulation fresh air. Installed ventilation in this room will help avoid and prevent damage to things that form condensation and musty smells due to lack of oxygen.

Furniture

To functionally organize the space in the dressing room, first of all you need to choose the right furniture. It happens and not furniture, in the usual sense, namely, a storage system to accommodate all things. For small room it is better to use open shelves and simple hangers-rods - they do not hide space and are as practical as possible. Drawers are better to choose with retractable structures.

Mirrors and colors

If the size of the dressing room allows, then install a mirror. Mirror in full height will allow you to see the resulting image completely and visually expand the space, which is so necessary for small dressing rooms. It is better to use light shades inside the dressing room, for visual magnification space.

Properly used elements of creating a practical room will preserve the ergonomics of the space, create a design and give pleasure while using the dressing room.

Features of a dressing room in a small apartment

In a small area, a dead-end corner in the room, part of the loggia or the first tier of the bed is taken under the dressing room. But you can make a dressing room from the pantry. Usually, its dimensions are so small that every free centimeter of space has to be rationally used.

It is necessary to plan the future dressing room, taking into account several nuances:

• cabinets and shelves are made to the ceiling;
• it is better to install open storage structures and not use doors so as not to take up much space;
• if the room is not separated from other rooms, and it harmoniously fits into the overall interior, then it is better not to use doors. And expand the opening if the wall is not load-bearing;
• a built-in shelf at the lower level of the cabinet can be converted into a seating area if the size of the closet-dressing room does not allow for a free-standing sofa or chair. Put foam rubber on the shelf and upholstered with a soft cloth, then the shelf will look like a separate design element;
• accessories are best stored in special boxes, and each pair of shoes in an individual box. Drawers and boxes with shoes can be placed on open shelves.

Things in the dressing room are distributed taking into account the frequency of use. Seasonal wardrobe items and those that are used very rarely are placed on the topmost shelves. Place shoes in boxes and boxes on the lower shelves. If the shoes in the dressing room are without boxes, then it is better to provide a metal stand for them to save space. Those things that are used most often should be placed on shelves and hung on hangers so that they can be quickly found and tried on.

How to make a dressing room from a pantry in Khrushchev

A dressing room in Khrushchev instead of a pantry can become the most functional room if you design it. The space must be divided into zones to give the room rationality. Zoning parameters will affect the size and configuration of built-in furniture.

The dressing room in Khrushchev should include active and passive zones. In the first part, you need to arrange those things that will be used often. Therefore, shelves with clothes and drawers in this area should be at a level of 1-1.5 meters from the floor, and clothes bars - at a level of 1.5-2 meters from the floor. The passive zone will include space below 0.5 meters from the floor and shelves above 2 meters from the floor. Here you can arrange things that are infrequently used, as well as bags and household items.

The optimal area for a small dressing room is 1-1.5 square meters. Here you can use 2 adjacent walls to fill things. It is better to place shelves near the entrance, and install a clothes rail on the entire wall, in the depths of the dressing room.

In a small dressing room, size less than 1 square meter, only one wall is used to mount the wardrobe structure. One of the two remaining walls can be used to install a mirror. And free space for changing clothes.

Functionality and original design of the room is possible even in a limited space. No need to overload the perimeter of the dressing room in a small pantry, and litter with unnecessary items.

DIY dressing room

A clear sequence of actions will help answer the question of how to make a dressing room. You need to start creating a dressing room with drawing up a project, calculating estimates and preparing necessary materials and tools. Depending on what furniture will be used: purchased or home-made, the final cost of transforming a small pantry into a dressing room will be different. Repair and filling the dressing room, performed independently, will cost less. Another advantage of creating a dressing room with your own hands is that the scope for imagination in organizing the interior is unlimited.

A do-it-yourself dressing room from a pantry can turn out no worse than a dressing room according to a finished design project. First you need to decide on the choice of the functionality of the room: the frame of the storage system and the method. These are the main elements of a homemade dressing room.

To install the shelves, such fastening methods as: "corners", "FIX" and "pelican" can be used. A clear advantage of the corners is that the installation of the mount is quick and easy, and the shelves installed on them are able to withstand big weight. The appearance of the "pelican" and "fix" type structures is very aesthetic. Such fasteners are suitable for shelves of different thicknesses, and when dismantled, there are practically no traces left.

From left to right: fastening "corners"; fastening "FIX"; pelican mount

Shelves and racks can also be picked up either at a hardware store or made by hand. In the latter case, you can choose any coverage. From practical film to veneer and varnish.

Tools for installation work in the dressing room:

• furniture fittings;
• component parts;
• connecting corners;
• guides and canopies;
• rods;
• additional items.

The last point involves the use of possible chipboard coatings: decorative plastic or natural wood. In addition, an edge should be used on the edges of the shelves, which will prevent damage to things. For convenience and ergonomics of the place in the dressing room, preference should be given to retractable structures with telescopic guides.

The sequence of actions when arranging a pantry-dressing room:

1. Free the pantry room from all things, make the necessary measurements of the room.
2. Make a drawing and dimension it. Determine how the interior space will be planned. Calculate the dimensions of future furniture.
3. Carry out preparatory and finishing work: level the floor and walls (if necessary), apply flooring, stick wallpaper or paint the walls with paint. The floor in the pantry must be made on the same level as the floor in the apartment.
4. Install a door structure: sliding sliding door, screen or curtain.
5. Conduct lighting.
6. Install the frame of the future furniture structure, and its racks and rods.
7. Equip the dressing room with decorative elements: a sofa or a chair, a mirror (preferably full-length), decorated handles and painting on furniture facades.

Internal dressing room

Seasonal wardrobe and clothes that are rarely used are best placed on the top shelves. The size should be minimal compared to other shelves. Things that can be folded without wrinkling can be placed on shelves at eye level. Blouses, shirts and dresses that require ironing should be hung on hangers.


Bars with hangers need to be made so that they can be approached and tried on clothes from them. Belts, hats and other accessories should be stored in clear plastic boxes or wicker baskets. Last option most preferred, as these baskets allow air to pass through which will prevent diaper rash from appearing on objects. To store umbrellas and bags, you can use the hooks.

A large walk-in closet is every woman's dream. Not every apartment, even a decent area, can boast a separate room for storing clothes and shoes. But in almost any living space such as "Khrushchev" there is a pantry. Many people use it for its intended purpose: they store things in it that they often use, these can be seasonal clothes, household items (for example, a vacuum cleaner, a broom, a mop). But such a place can be used with much greater benefit. We will tell you how to make a dressing room from the pantry with your own hands quickly and inexpensively.

Features of the dressing room

Alteration of the pantry into a dressing room allows you to solve a number of important problems. There is no need to purchase or individually order a large spacious closet, which will significantly save family budget. You can rationally zone the premises by changing their parameters, if possible. Most often, pantries in Khrushchev apartments are subjected to such re-equipment, which, as you know, are small in size. Dressing rooms were originally organized in such dwellings. But over time, for lack of extra free space, they were gradually turned into pantries, in which various things were stored for household needs.

Making a dressing room back from the pantry with your own hands is quite simple if you know which Decoration Materials to use, what devices to equip it with, how to properly position them.

Uncomfortable niches and pantries in dwellings of modest size are most noticeable, but their minuses can be easily turned into pluses by complete refurbishment and filling with shelves and shelves, drawers and rods.

If your apartment has a very small pantry or it doesn’t exist at all, then you can make adjustments to the organization of the hallway space. Most often, it is there that the storage for things will not interfere with anyone, there will be free space for it.

The dimensions of the future dressing room depend on the capabilities of a particular apartment and the needs of its owner. But if we talk about average parameters, then usually the height of this room is up to the ceiling itself, the width depends on the capabilities of the wall (1-2 m), the depth is at least 1 m. Depending on the desires and capabilities of the owner, the internal space can be filled with shelves, racks, build mezzanines, install hangers.

Often in apartments there are niches. If there are any in your apartment, arrange a dressing room in their place. To do this, you only need to install a door (it can be made of wood or MDF), construct a mezzanine, shelves, equip it with hooks for clothes.

If the pantry, which could be converted into a room for storing things, is simply not in the apartment, then it must be built as inconspicuous as possible. For this, drywall partitions are made, in which an area is left under the doorway. In such a small room, all the space is fully utilized, up to the ceiling.

If you have storage...

There are two ways to make a dressing room small size from the pantry with your own hands:

• replacement of the pantry with a cabinet (it is distinguished by simplicity and speed of execution);
• carrying out the whole complex of works with your own hands.

In the first case, the doors and partitions between the corridor and the pantry are completely removed. Next, they turn to a furniture manufacturing company to order a cabinet of the appropriate size. It is installed in the niche formed after the dismantling of the partition. It is best to choose a wardrobe with compartment doors: this will save space in the hallway. This design, additionally equipped with mirrors, will visually enlarge the room. This type of closet remodeling will save you time.

When choosing the second option, you should prepare for a longer process.

Cleaning the closet space

First you will have to remove all things from the room, choose those that are still to be used. Get rid of unnecessary old rubbish: there is usually plenty of it in such rooms. Next, remove the door from its hinges. If necessary and there is such an opportunity, then the shape of the future room is changed, for example, to U-shaped or linear with the help of plasterboard structures.

measurements

To calculate the parameters of the future dressing room and the amount of materials needed, you will need a tape measure and a marker (they apply the markup result, you need to work with it carefully, because after installing the shelves and racks, the marks should not be visible).

Blanks

It is necessary to prepare materials for future shelving, create blanks for them. The material from which you plan to make them, saw them according to the measurements taken.

Fixing shelves

Shelves are fixed in three ways:

• with the help of dowels;
• metal corners;
• wooden frame (from a bar).

Choose fasteners of your choice. The main thing is that the structures are securely and firmly fixed. But the first method is the least practical, since the shelf, installed on the protruding dowels, is unstable, when resting on its edge, it can turn over. Therefore, it is worth choosing corners or a frame from a bar.

The finished structure of wooden blocks or chipboard is fixed on the wall in the places marked with a marker. Do this with a screwdriver and screws or special glue.

At this stage, regular checking of the correct location of the structure using a small building level is required. Next, you need to install the shelves.
Do not forget that chipboard shelves at the cut points must be edged: this way you can avoid damage to things on the raw edge.

Rod mount

Fasteners for the bar are installed after the shelves are installed. Similar items are best purchased at a store that sells furniture fittings.
In order to place the required number of hangers (trempels) on the bar, the width of the shelves should be at least 58 cm. The distance between the shelves and the bars should not exceed 5 cm.

You can position the clothes rails at different heights. The height of the room, divided into two parts, makes it possible to mount several rods with hangers. In this case, it is necessary to take into account the length of the clothes that they plan to hang on them. The method of dividing the height is rational if you are sure that there will be no long dresses on the hangers on the floor.

After installing the shelves and rods, the former pantry is equipped with full-fledged lighting, doors are installed.

Surface finishing

Perhaps in the future dressing room you will have to update the walls, ceiling and floor, change the door. If the walls of this room are in fair condition, then the cheapest and most practical option is to paint them. Qualitatively painted surfaces do not need special care, they can be washed with water with the addition of various detergents. When you need to carry out the next repair, such walls can be put in order without dismantling the shelves (they just need to be covered with a film to protect against paint). Also, the side surfaces can be pasted over with wallpaper or closed MDF panels. In the latter case, you will have to build a frame from bars or metal profiles, which will “eat” precious centimeters.

As floor covering you can use carpet, laminate or linoleum.

The ceiling in the dressing room can be painted in the same way as the walls, or you can use a stretch structure with built-in spotlights.

Mirror

An obligatory element of the dressing room is a mirror. It is hung on the inside of the door to save space. Then the room is filled with various drawers, racks, shelves for shoes and hats, rods for long things, compartments for storing smaller items of clothing.

How to turn a pantry into a dressing room with your own hands

You can make a similar design using wardrobe pipes equipped with special fasteners. Such systems consist not only of pipes, they are equipped with holders, shelves, doors. In this case, the dressing room is assembled as a designer. Such models can be purchased at furniture stores. Their main advantage is the ability to change the position of shelves, ceilings, when necessary.
Remember that the future dressing room should not stand out from the general interior of the apartment. She definitely fits into her style. Therefore, special attention should be paid to the door. You can make it original, interesting with the help of stained-glass windows made of colored glass or its imitation. Drawings on the facade successfully emphasize the design common space, make it more attractive, refined.
The interior of the dressing room, converted from a pantry, should be as functional as possible. For the most economical use of its area, various drawers and shelves for small items are even hung on the doors.
In order not to clutter up too much limited space the former pantry, use designs for wardrobes such as "loft" and "bazeri", they include mobile cabinets, which, if desired, can be removed to another place. Such systems will facilitate the arrangement of such a room with your own hands.
A small pantry can be converted into a closet with many built-in structures, open and closed shelves, even outside the room.

Alteration of the pantry into a dressing room, located along the entire length of one of the walls - interesting option, which can be used in "Khrushchev" apartments. In this case, you can use the second entrance to the room. Thus, the former pantry will divide the rooms and acquire a separate entrance. This is very convenient, since it will not turn into a dead end filled with things, and shelves can be placed along its walls and ends, or you can install a hanger for long things along the entire wall. This dressing room is comfortable and practical.

How to organize the space of a small dressing room

A small room must be carefully planned in order to rationally use every centimeter of it.

If it is not possible to change the space of this room, then it is reasonable to place all things on small shelves (it is convenient to place everything on them and, if necessary, find them).

Drawers are usually placed at the bottom for storing shoes. At the top are shelves for storing seasonal items. In the middle are items of clothing that are used regularly.

In a small dressing room, you need to leave space (about 1 m) for things that should hang on a hanger.
To use the room was convenient, it must be equipped with lighting devices.

Door: needed or not?

If your dressing room is in separate room then you need to install the door. It will divide the space and add completeness to the overall interior.

If you remove the doors, then the closet can be turned into a shelving unit, the shelves placed outside it can become part of another room.

The structure, located in the corner, can be closed on one side with a plasterboard partition, and on the other, left partially open.

The pantry is sometimes combined with a closet, in which case the door must be removed.

It is convenient to use a dressing room with sliding doors or accordion-type structures: this saves space, which is important for Khrushchev-type apartments. Swing models are mounted if there is enough space to open them.

You can close the doorway in the storage room with a thick curtain that can completely close it. This design is hung on a cornice fixed on dowels or self-tapping screws. This option will help reduce the cost of dressing room equipment and allow you to easily change the design of the entire room.

If you decide to place rooms for storing things and shoes in a niche located in the bedroom, then use a design with frosted or transparent glass as a door. It will help to visually change the parameters of the room in the direction of increase.

As for the former pantry, the installation of transparent doors there is undesirable, otherwise your things will become public.

A good option is a door decorated to match the wall (for example, finished with wood panels or pasted over with the same wallpaper).

You can, on the contrary, install the same design as in other rooms. This will emphasize a single style solution for the interior of your home.

All about shelves

Shelves for the dressing room can be made of chipboard, chipboard, natural wood. Melamine coated chipboard is highly resistant to mechanical damage, exposure to moisture. When using it, it is necessary to apply a special edge of the corresponding color to the cuts.

If you decide to make a dressing room with your own hands, then you will need certain fasteners. So, for fixing the shelves, you can choose mensolo and shelf holders.

You can quickly install storage structures with the help of corners. They are able to withstand heavy loads.

FIX mounts look very neat. If necessary, the shelves installed on them can be easily dismantled.

Mounts of the "Pelican" type are able to hold shelves made of materials of various thicknesses.

Telescopic guides for drawers are more convenient and durable.

You will also need wardrobe hooks, handles, plugs, awnings.

If it is planned to install compartment doors in the dressing room, then it is necessary to purchase the appropriate components.

There is no need to build shelves according to the principle, the larger and wider they are, the better: things that are too deep will have to be laid in two rows, which will soon lead to a mess. If your clothes storage room is not too small, then it is better to mount sliding shelves with telescopic rails. You can also install drawers at the bottom. Accessories and small wardrobe items can be stored in small drawers equipped with inserted compartments. If you think that you can’t build such structures, then you can simply install ordinary shelves on which you place boxes made of paper, plastic, baskets of various sizes.

Lighting

To use the dressing room was most convenient (there are no windows in it), it is necessary to equip it with lamps. Such a room needs lighting in every corner so that it is as quick and comfortable as possible to select and search for things in it.

Functionality or original design?

A do-it-yourself dressing room should be not only functional, but also aesthetically attractive.
Today in hardware stores you can buy ready-made racks for its equipment. They are practical and lightweight. But there is nothing original in such constructions. Their faceless doors can be transformed with a little imagination. Color them with special paints, decorate with unusual pens or decorative elements, and they will become a real decoration of the overall interior.

How to make a dressing room from drywall yourself?

To make a dressing room with your own hands, you will need the following tool: a tape measure, a building level, a marker or pencil for marking, a saw, a hammer, a jigsaw, a screwdriver, a drill or a puncher, a grinder (depending on which frame you plan to make), a stepladder, brush, roller, container for varnish or paint, eye and hand protection.

1. Make a detailed drawing of the future design, take measurements, calculate the amount of materials. Even if you carry out such actions for the first time, think through everything carefully, every little thing in such a matter is important. This will allow you to avoid unnecessary expenses for the purchase of material, which may later remain unclaimed or for the purchase of the missing one.
2. Put markings on the walls.
3. Mount wooden (bars can be of various sizes depending on where they are used in the structure) or metal carcass. Start with a beam placed horizontally across the ceiling. It will become a guide for the surfaces of the future dressing room. The frame is optional if a shallow dressing room is planned like a built-in wardrobe. In this case, it is possible to fix chipboard sheets on the walls, which will become load-bearing partitions.
4. Install vertical supports every 60-70 cm (no more than this).
5. Carry out the installation of the transverse beams: they are needed for further fastening of various shelves, drawers, hangers.
6. Sheathe the frame with drywall sheets using self-tapping screws. If necessary, materials for additional sound insulation and wiring for lighting can be laid inside such a structure.
7. Seal up the fixing points with mortar. Treat the walls with a primer, let it dry completely. After that, the surfaces can be plastered, painted, wallpapered.
8. Install doors.
9. Fix all the necessary shelves, pull-out structures, hangers.

DIY shelving

If you want to save money when converting a pantry into a dressing room, then make your own storage racks. The lack of self-made designs is not always aesthetic appearance. Ready-made racks purchased in stores have a special coating that allows you to hide external flaws.
Do-it-yourself models can be varnished, painted, wrapped with self-adhesive film, veneered. Wooden structures must be pre-treated with an antiseptic.
Such a dressing room will decorate the interior of your home, it will look attractive both outside and inside.
DIY shelving will allow you to inexpensively and in accordance with your needs arrange a dressing room.
Remember that only a carefully designed plan for the future storage room for clothes and shoes, taking into account the features of its content and equipment, the characteristics of your life (the number and types of shoes, the length of clothes, the presence of jewelry and various accessories) will allow you to create a truly comfortable dressing room.

The closet-pantry takes on the main functions of storing things throughout the house, making it possible to unload the situation in the living quarters.

The choice of location should be approached carefully. For a small room, the design will become bulky and overwhelming, even if it is made of cutting-edge materials.

Owners of Khrushchev houses should not worry: their houses have pantries that can always be dismantled and enlarged for new projects. In apartments with redevelopment in favor of separate rooms, a useless place is formed in the lengthened corridor, it can also be used. The sliding wardrobe is harmoniously built into the niches provided for at the construction stage.

In any house, if you search well, you can find a blind corner or other suitable area for storing things, you just need to choose the right cabinet configuration, taking into account the specific area.

Features and Benefits

The pantry is fundamentally different from a sideboard, a pencil case, a rack, even a built-in closet, and this is its peculiarity. In terms of capacity, any piece of furniture loses to it.

Before you start organizing a closet, you should know in advance what things will be in it. You can not store clothes with preservation, shovels or even a bicycle.

If you plan a dressing room, in addition to clothes and shoes, you can find a place for a mirror, pillows, blankets, an ironing board and drawers with small things. It is better to place a storage closet closer to the kitchen and keep all kitchen utensils in it, including winter supplies.

Storage for working tools, garden tools, a vacuum cleaner, a bicycle, etc. should be located in the hallway or in the country house outside the city.

The closet-pantry has only one drawback - it takes up a lot of free space. But these meters are used with maximum efficiency.

For everyday life, such a structure has many advantages:

• A large number of things are concentrated in one place, which makes it possible to unload the apartment from unnecessary furniture.
• In a well-planned pantry, every item knows its place, which makes it easier to find it.

• Modular storage and mesh designs make every inch of space possible, increasing walk-in closet capacity and reducing wasted floor space.
• Such a closet is exclusive, it is built for a certain area for storing specific things, taking into account the tastes of the owners.
• The whole family can use it, there are enough storage systems for everyone.

Types of structures

Closets-pantries are divided according to their functional accessories: a dressing room - for clothes, a pantry - for kitchen utensils, a working one - for tools, a vacuum cleaner and other household items.

The division by type of structure is closely related to the place where this structure will be located:

• A niche, if its dimensions are at least 1.5 by 2 meters, is suitable for a pantry like a wardrobe. Sliding doors will separate it from the rest of the room.
• The dead end of a deaf corridor can be easily transformed into a closet, fencing off with plasterboard. Doors should be selected the same type for all rooms.
• You can redo the pantry in Khrushchev, taking out all the contents from it and stuffing it with trendy modules. Entrance door carried over according to circumstances.

• In big square room Suitable for corner design. The facade is made straight or rounded.
• If the room is rectangular, and there is a blank wall, part of the room is given over to the dressing room.
• Sometimes insulated, well-equipped balconies or loggias become storage systems.
• In private houses, a pantry is well equipped under the stairs leading to the second floor.

When the place is chosen, you should deal directly with the structure and arrangement of the closet.

Arrangement

Equipping a closed space for storing things, you should take care of ventilation and lighting. Then think about what the cabinet will be filled with, draw a diagram of the location of racks, shelves, individual modules and various fixtures.

Equipping the pantry, the lower tier should be left for large things: a vacuum cleaner or boxes with boots. Summer shoes are best stored on shelves with a slim system slope.

In the central part is best zone access, so here you need to have the most necessary things. It can be shelves with clothes, towels or linen baskets. The upper tier is filled with items of rare use. The place for the bar under the hangers is chosen the most easily accessible.

When arranging a closet, you should know that the fillings are cabinet (made of wood, MDF), mesh (drawers, shelving based on metal mesh), loft (aluminum). The main elements are rods and pantographs, hangers for trousers and ties, modules for storing shoes, gloves, hats, scarves.

It is convenient to store things on the racks in drawers or baskets, for example, for scandinavian style interior, this method of filling the shelves is required.

It seems to some not rational to leave an unoccupied space in the center of the pantry in order to be in it. The idea with retractable modules that are close to each other solves the problem. It can be a block with a bar and hangers, a module with shelves or mesh drawers.

Such structures are equipped with reliable wheels, completely leave the pantry and are installed for the duration of use in the right place.

How to do it yourself?

In order to build and equip a closet-pantry, you can not turn to specialists, but try to do it yourself. If the house has pipes and boards, it is not necessary to pile them in a closet. Specialized stores sell all kinds of storage systems and accessories. For an ergonomic pantry, it is better to use mesh structures, they occupy less space. If necessary, reduce costs, you can use improvised material.

Consider step by step how to convert an old pantry into a modern practical design:

• It is necessary to draw up detailed diagram with the exact dimensions of the pantry and all equipment. Designate repairs that may affect the redevelopment or wall decoration, consider ventilation and lighting.
• Carefully align the walls and floor, otherwise all structures will be skewed. Inner part paste over the premises with wallpaper or paint with water-based paint.

• During repair work it is necessary to lay electrical wiring to light sources and sockets.
• It is important to provide ventilation holes for proper air circulation.
• Ready-made mesh racks, boxes, rods, pantographs and other elements of the storage system the right sizes can be bought in specialized stores and installed in a cabinet.

• If the decision is made to produce a structure from laminated chipboard, it is easy to order in hardware stores. In the same place, having ready-made sizes, they will carry out with maximum savings computer modelling sheet and make it precise sawing.
• For the installation of racks and shelves, there are special fastening systems (corners, shelf holders). When installing long shelves, you can use a chrome pipe as a stand to avoid sagging.
• The door, depending on the possibilities of the pantry, is selected either as a sliding door or as a regular door leaf.
• The finished closet-pantry should match the interior of the room in which it is located.

With modern construction and furniture market opportunities, it is not difficult to order filling for a cabinet in stores and assemble it yourself. You only need to have the desire.

Stylish ideas in the interior

Closet-pantry - the most functional device. This is not an old grandmother's closet in the far corner of the house, such a design can be in perfect harmony with modern interior. Consider examples of successful integration of storage locations into the surrounding space.

Cozy bright room, most of which is given over to the dressing room. The scope of the room allows you not to cling to every centimeter, everything is neat, thought out, placed in its place. Sliding glass doors zone the hall and at the same time unite its two parts into a single whole.

An example of a corner square closet. Only a large room can afford such a mini-room. Behind the strict sliding doors, shelves are guessed both in the dressing room itself and on one of its walls.

An interestingly decorated corner with an internal and external storage system, which is the head of the bed. Two symmetrical inputs create additional convenience in operation.