In addition to the basic equipment, professionals and amateurs of classic cross-country skiing and alpine skiing have to spend money on all kinds of lubricants, creams, and auxiliary equipment. Expensive specimens require especially careful handling during preparation. The cheapest device for preparing sports equipment in a store costs at least 3 thousand rubles. With a little ingenuity, you can do it yourself.
The simplest machine can be made from a regular floorboard, suitable in width. You need to put the ski on it, circle the outline and cut it out with a jigsaw. There are options that are more complex and easy to use. For example, the machine can be made integral, stationary, or collapsible. In the latter case, it can be easily stored and transported from place to place.
To make a machine for your own hands, you may need:
- Metal square tube or board for the base.
- Solid wood or plywood (for a lightweight version of the machine). Two supports are cut out of it, on which the ski will be laid.
- foamed soft material, foam rubber or tape for soundproofing. It is glued to the surface of the clamps so as not to damage the lining of the sports equipment.
- Metal loop. With one side it is screwed to the base of the machine, and the other is inserted into the boot mount. Needed for reliable fixation, by creating the necessary deflection of the plastic.
- Jigsaw.
- Drill.
- Drills for metal and wood.
- Self-tapping screws.
- The skin is rough and fine for processing wooden bars.
We make the machine step by step
To make a ski machine, the drawings of which are presented below, you need to take wooden beam. Approximate parameters 1650 x 250 x 40 mm. The values depend on the length of the skis.
A pair of bolts 50-60 mm long with wing nuts, mounting plates 40x80 mm in size and holes 10 mm in diameter, as well as clamps for attaching the machine to a table or other horizontal surface.
Step 1. Mark and saw the parts of the machine according to the drawing.
Step 2. Drill holes in the bars, outlining the future fastenings of the metal plates. Sand the wood.
Step 3. Round the base bars on one side, stick soft material on top: foam, soundproofing tape, etc.
Step 4. We fasten the clamping plates. It is best to put pieces of rubber hose on their ends so that they do not leave marks on the skis.
Step 5. We try on the skids and, if necessary, adjust the elements so that they fit snugly together.
For the manufacture of ski machine do-it-yourself, the drawings of which provide for fixing the skids in the center for fastening. To do this, you need to make a metal loop, screw it to the base.
IMPORTANT! The loop must be adjustable so that it can be used to increase and decrease the ski tension.
The bracket is best made from a round piece of steel and a long bolt. These two blanks need to be welded to each other. The nut into which the mounting loop is screwed must be securely fastened to the base.
To the pluses homemade device relate:
- cheapness;
- ease of construction;
- stability;
- the possibility of manufacturing taking into account the individual parameters of skis;
You can paint the ski machine with your own hands with paint or cover it with a colorless varnish. So it will last longer, while maintaining an attractive appearance.
The minimum set of the skier consists of: a set of lubricants for different temperatures, with hard nylon pile, special scraper, natural cork, fibertex, cleaner, iron.
- A few words about lubrication. It should be of three types, for different temperatures: above zero, up to -8, below -10 degrees. It is important to remember that the snow temperature is 2 degrees colder than the air temperature.
- It is necessary to prepare sports equipment on the day of training, as weather conditions can change overnight.
- Before throwing them on the snow, let them stand upright to adjust to the air temperature, otherwise the snow may stick to the warm skids.
- Keep skis connected, sliding surfaces to each other. Between them you need to lay a soft gasket. It is unacceptable to leave sports equipment for a long time near heating devices, use a balcony with direct sunlight for storage.
- So that the base does not oxidize, for spring, summer, autumn, you need to “preserve”, that is, apply a greasy layer of soft paraffin to the base.
Homemade machines for - a budget alternative to expensive store options. Due to the variety of schemes, a wide selection of their components in stores, the process of manufacturing a structure will not take much time, but it will save money that can be spent on buying additional equipment.
Comments (0 )
New ones first
Old ones first
First the best
OR LOG IN AS A GUEST
Latest comments on the site
⇒ "I really like such funny monologues and scenes! The video cheers up and sets you up for positive, you can laugh, and sometimes this is so lacking in our lives! I am sure that absolutely all parents have to check the diary of their child - it's funny when you "discover" for yourself the news that the country has long since switched to the twelve-point system! It seems that this dad is behind the times, it would not hurt him to learn a little himself. Laughter, and more! Thank you for the opportunity to see all the most interesting."
Added - 05/11/2019
⇒ "Well... Just the trailer... Actually, I know that the final season of "Game of Thrones" started on April 14 this year. But many sites under the guise of the 8th season expose only trailers. It is not clear why this is being done. This attitude towards the viewer - only angers and annoys. It does not add a rating to the site. Are the admins being so mean? The next time I look for a video, I will not go to this site. This is not a quality resource. I can't give a bad rating, but I won't give one star either."
Added - 05/11/2019
⇒ "It is a well-known truth that bears cannot stand the smell of alcohol, they go berserk from it. Yes, and sober people should not stick their hands to a wild beast in a cage, a bear with a clubfoot can tear them off. Of course, after the drunk decided to fight the bear, flickering and obscene words began. Probably at that moment the whole drunken company sobered up and tried to save the daredevil, but it didn’t seem enough to him, because bears have long claws like blades and strong teeth. Maybe the video will be an edification to other alcohol lovers and opponents of animals, you should not mess with bears and other large animals when the "drunk" courage rolls over."
Added - 05/11/2019
⇒ "It will be hard for you in the future, especially in family life, since you don’t even know what to shoot. Take off your cat, hobbies, hobbies. Shoot all day, and then make a cut of funny or interesting moments, put funny music on it and, behold, a new video is ready. You can make an educational channel for children. You will read something interesting and then tell it to the audience. It's even better to show it. That is, to conduct experiments. Well, or at the very least shoot pranks (pranks) on acquaintances. This content is always in demand."
Added - 05/11/2019
⇒ "This is what happens because of the condition of our roads. Some kind of pit that was not repaired in time led to such an accident. Five cars were not just injured, but seriously damaged. And now who will compensate for all this? You can, of course, sue those who have to repair this section of the road. But it will be so difficult to find this organization. In such a situation, each organization switches the arrows to the other. So the owners of the car will not sue anything. I wonder if insurance can help in this case?"
Added - 05/11/2019
You need to understand that people who successfully prove themselves in skating achieve optimal results not only due to developed skills and inherent potential. Among the most mandatory requirements is the operation of modern ski equipment.
Good speed on the site is ensured only by reliable, stable and high-quality skis, which must be in perfect condition and retain their original parameters. However, this is not so easy to achieve. Athletes regularly carry out special processing of the used skis, as otherwise the loss of former agility is expected, the deterioration of the sliding surface. The return of the former properties is carried out on a special device, which is recommended to be created independently in the absence of financial opportunities to purchase unique equipment.
Features of the ski processing machine
The machine is a special design consisting of two profiles. In this case, the profiles are made of metal or natural wood. The structure is supposed to be located along the edges of a wooden or aluminum base, but an aluminum base is most often used.
Some models suggest the possibility of installing special supports made in the form of legs. The specified part is attached to the base of the structure.
The ski on special equipment must be laid in a special way for successful processing: its ends must touch the profiles, the sliding surface must be directed upwards. Then, a metal loop must be inserted into the fastening intended for boots, which is stretched until a certain moment: the equipment takes the correct shape of the profiles. It is recommended to fix such a position securely, because it is after reaching it that any work on preparing the skis is facilitated.
In most cases, the machine skiing has a special tube made of aluminum. This is required to successfully reduce the weight of the product being used. In fact, a device for high-quality ski preparation may be required at almost any time, and it is unrealistic to predict the appearance of a corresponding need. Active people often take with them special device, which allows, if necessary, to improve the condition of the skis.
Homemade machine: important nuances
Currently, in sports stores you can find a variety of devices that allow you to professional level. It is important to note that a device for preparing used skis when skiing can be successfully created independently at home. Moreover, the created do-it-yourself ski machine will correspond to store products in terms of quality and functionality. If you take a responsible approach to the creation of equipment, you can count on improved performance. It is important to understand that the drawing will be the basis for the release of a home-made design. Without a drawing, it will not be possible to hold a planned event at a decent level.
Wooden supports for the machine
It is planned to create special equipment, which includes two parts, each of which will contribute to successful and full-fledged work. As a result, the used inventory will be available for disassembly when appropriate needs arise.
Each part is visually similar to the other. The best option for the base is a pipe made of reliable and high-quality metal in a square shape. On top of it, a support made of natural wood should be installed.
The next task is to use wooden base with foam strip. This design will allow you to rely on reliable and safe attachment of skis. In one part, it is desirable to make a strong clamp, since only it will allow you to successfully carry out events with ski equipment. If you create a do-it-yourself ski machine, it is important to understand that ski processing should be carried out as much as possible. comfortable conditions and it always depends on the nuances of the design. Proper retention of the skis on the machine is mandatory.
Machine base
Any do-it-yourself or industrial-scale ski preparation machine has a special base. It largely depends on how successfully the machine will be used.
- For attaching wooden support only ordinary self-tapping screws are used to the base of the product.
- The head of the screw should be as recessed as possible. Otherwise, the halves of the structure cannot be connected in order to guarantee the successful preparation of the skis for subsequent operation.
- Supports are recommended to be made with a slight deflection, so that the ski can be correctly laid on the machine.
- The ideal option for the base is metal pipes with a square section. To connect them, it is advisable to use an ordinary wooden plank, inserting it into both sides of the pipe.
Using the ski bracket
When creating a machine with your own hands, you should take care of the correct use of the bracket. It is assumed that during the preparation of the skis for further operation, they will be attached to the bracket, the height of which will be adjusted depending on the requirements.
For the bracket, a piece of steel with a circular cross section is used. For reliable connection, it is recommended to weld a piece of steel. The machine used to prepare modern skis before skiing must have a reliable and high-quality bracket, otherwise the design will be unstable when exposed to and full time job ceases to be possible.
Benefits of the machine
Homemade machine for skis has the following advantages:
- the possibility for further disassembly of the structure and convenient transportation;
- high level of strength and resistance to mechanical stress;
- convenience at work;
- ease of manufacture.
The machine can be created independently, if you take into account the design features and be guided by the drawings.
If the article was useful, write to us.
Whether the ski machine was created with your own hands, or in industrial conditions, it doesn’t matter. Anyone who loves skiing knows how important the quality of equipment is. To achieve reliability and stability, a ski preparation machine is used.
To go in for skiing, you need the skills of an athlete, and equipment, reliable, of high quality. Ski equipment in good condition with saved factory settings helps to ensure speed.
According to servicemen, people who prepare equipment for competitions, the design of equipment plays a major role. After all, prepared equipment glides better. Even lubrication is not as effective as machining.
There are many types of skiing. Therefore, the inventory is selected differently. Racing models have a different structure and level of aggressiveness of the material from which they are made. Professional athletes know how to choose equipment depending on climatic conditions in which they are going to "drive". But, sometimes the factory structure is not satisfied, or the wear has already reached the limit. Then the ski preparation machine comes into play.
Fixing damage to sports equipment is difficult. The device will help return the sliding surface and its former properties. Not everyone has access to factory equipment. In this case, we advise you to make a ski machine with your own hands.
Design features for different types of skis
A ski straightening machine is a two-profile structure made of metal or natural wood, which is placed along the edges of an aluminum base. On some modifications, supports, elements in the form of legs are attached to the base. The base is a fragment on which the success of future use depends.
For processing, the equipment is laid on the structure so that the sliding plane is directed upwards, and the ends touch the profiles. A metal loop is inserted into the fastener for boots, which is stretched until the equipment straps take on the desired configuration.
This position is fixed, facilitating the further workflow.
To reduce the weight of the device, the base is made of aluminum tube. Since the equipment is required at any time, you can carry it with you.
Main details
Winter sports enthusiasts need to update their equipment regularly. For this, a toolkit has been developed that maintains equipment in good condition. Buying a factory model sometimes becomes pointless. Therefore, fans of ski entertainment will need a homemade device.
Today, there are many elements on sale to make models that please with their simplicity and ease of repairing equipment. Variants of drawings of such structures can be found on the Internet, and create the model that you like. Not required complex schemes, because even on the simplest model prepare equipment for training or competitions.
The applied structure on home-made equipment serves for a long time. Yes, and the design is always at hand. This allows you to achieve sliding equipment in convenient time, anywhere. Fans are happy to put their equipment in order before the start of the skiing season.
Why is inventory processed? To achieve a good glide, without "blockages" on the sides, this happens when worn. You need to take into account that the equipment is processed differently, and special machines are designed for it. And if snowboards and equipment with metal edges are treated with strong pressure on the sliding plane, then running equipment requires careful handling. The preparation of running models is carried out with care, accuracy.
The condition of the sliding surface must be carefully monitored:
- prevent drying out;
- flush out used grease regularly;
- treat with ointment;
- for storage or transportation of inventory, fill plastic with shipping paraffin.
Strict observance of the equipment care rules will allow for a long time not to use hard machining using emery wheels, which is necessary in case of severe equipment deformation.
A hand-crafted ski treatment machine is enough to provide easy glide, to enable skiers to achieve high performance.
wooden supports
We are talking about the creation of collapsible equipment, consisting of two parts. Both parts are identical. The base is a square metal tube. A support made of natural wood is installed on top of it.
The quality of processing depends on the nuances of manufacturing the structure. Mandatory moment - correct location and holding the slats on the frame. An important nuance is considered to be the production of the base.
Base
When creating this element, attention should be paid to the following recommendations:
- The wooden support is attached to the base with self-tapping screws.
- The head of the self-tapping screw is carefully recessed.
- The supports must be deflected so that the equipment fits correctly on the frame.
A base of metal square pipes that are connected by a wooden plank inserted into both pipes is a good option.
Ski brackets
When creating a home-made structure, you need to know that the bracket is the element to which the slats are attached at the time of preparation for further operation. Therefore, processing depends on the correctness of its choice.
The bracket is adjustable in height according to requirements. For durability, the part is made from a piece of round steel. To fix the bracket, it is better to weld it. This is reliable, because in order to prepare modern equipment before training, you need a device. Otherwise, if the design is shaky, it is impossible to complete full preparation.
Important nuances in the manufacture
It is necessary to use light and reliable materials for the manufacture of the machine. Carry out work in accordance with safety regulations. A home-made design must meet the dimensions and requirements, otherwise it will not be possible to process the equipment correctly in the future.
Starting to manufacture the device, you need to make sure that the necessary parts are prepared. Boards for construction should be chosen dry, so that over time they will not be “led” when dried. Accuracy in creation will allow you to properly process inventory.
Create homemade design it won't work without a blueprint.
Benefits of the machine
A number of advantages that the device has are:
- mobility, compactness;
- structural strength and resistance to power loads;
- ease of use;
- ease of manufacture.
People who own factory models consider homemade devices to be imperfect, from a technical point of view. But it cannot be denied that designs made independently have many advantages. Light weight, fast installation, adjustable along the entire length of the bars, stability due to square profile at the base. With the advent of new materials, it became possible to create fantastic things.
Performance homemade device for processing winter inventory is a useful, exciting activity. This design gives high performance slip. And success in the manufacture of one machine will become a useful skill in life.
How to cook ham in the oven at home
Pain in the lower abdomen during pregnancy, reasons for what to do Can the lower abdomen hurt if pregnant
Protein for muscle gain
The best vitamins for men according to customer reviews
How to lose weight on a vegan diet?