Pump water cannon depth. Water jet pumps: what are they and why are they good? What is the design of the pumps Gileks Vodomet

It is not enough to dig a well or a well. You should take care of how to supply water to the house, garden and other places. The water pump is designed for this purpose. The pump manufacturer is Dzhileks, a domestic leader in the manufacture of water pumps and related equipment.

Where can I use Gilex Water Cannon:
open waters,
wells,
wells,
various water tanks.

From the sources, water is supplied to the automatic water supply systems of the house, for watering the garden and garden, or for other purposes at the discretion.

Due to the layout features, the Gileks Vodomet pump can be placed at a depth of 100-150 mm from the water surface, and can also be used in a horizontal position. It is perfect for working in open and shallow sources.

How does a water pump work?

All Gilex models have a similar device principle. The stainless housing houses the pump part and the electric motor, which is washed by water. The rest of the parts are fixed with an intermediate support. The case is closed with covers on both sides.

The pump motor is filled with oil. The thermal relay is located outside the oil-filled cavity, which simplifies the repair of the part.

Depending on the model, the Waterjet pump may have different number repetitive steps. The parts of the device are divided into four components:
Cup.
The bottom of a glass.
Anti-friction washer.
Impeller.

The impellers rotate in the glass. And the cylinders are fixedly fixed between the cover and the plastic ring.

Device advantages

The manufacturer took care of human health. All parts of the Gileks water jet pump that come into contact with water are made of environmentally friendly and safe materials that do not affect water quality.

Some models of the Jilex Water Jet device have a removable filter. Its purpose is to protect the system from dirt, clay and sand. The filter extends the life of this equipment. If it gets dirty, you can clean it yourself. Also, the fence mesh has a large area. Water will fully flow even if the pump was lowered to the very bottom of the source.

The bottom cover has a conical shape. This design makes it easier to submerge the pump, it will not cling to possible casing connections.

The power cable can be pulled through the cover on top of the pump. Thanks to new design device it can be effectively used in wells with a small casing diameter.

The engine of the Gileks water jet pump is cooled thanks to the duct cold water between stator and housing.

Automation, which is built into the pump system, excludes its operation in idle mode. This function protects the engine from overheating, which prolongs its service life.

The thermal relay built into the pump motor determines the oil heating temperature and, if the norm is exceeded, stops the operation of the device.

Each well in the summer cottage for supply from the depth pure water, must be equipped with a device such as a water jet pump. This device, like a water jet pump, makes it possible to receive water from a well where there is no water.

The powerful technical characteristics of the water jet pump allow you to lift water from great depths. The water jet pump is small in size, has a very simple design, and endowed with the simplest automation.

1 Features and differences

Water jet pump "" regardless of size, models are always made only at domestic enterprises. All pumps of this line are adapted to the Russian climate. And we know that water resources(highways) have never been clean in our country.

As a result of this, even the simplest water cannon can pump the dirtiest water and not fail for a long time. The channels inside the pump are practically not contaminated.

The most important advantage of the pump is that it is able to clean itself. Pumps are also good because, in addition to Soviet components, you can easily pick up spare parts for them from French, American and even German production. At the same time, the price of a water jet pump is much lower than, for example, German or French counterparts.

Now the pump is constantly being improved. The quality of performance is improving, the design has become an order of magnitude better. Here, for example, if we talk about the latest model of a water jet pump for a well, then in it the electric motor is located above the location of the pumping part. As a result, the Water Jet water pump has a body that is an order of magnitude smaller. It became possible to connect electrical cable to the top.

All water jet pumps for wells have a wetted motor. This means that water passes between the casing and the stator sheath. As a result, the engine is continuously cooled.

The water jet pump for the well has high-quality dividing seals. These seals protect the motor and also give a complete seal to the housing.

2 Water jet pump device

The water jet pump for the well has a very strong power. This allows him to provide water not only for a small plot of land, but for the whole house.

We will now analyze the most best models water jet pump.

Submersible model WATERJET PROF 55/35

This model is capable of pumping 3.3 cubic meters of water per hour. Equipped with a 1.5 x 1.5 mm mesh filter. Due to this, it prevents major clogging, which is in the water. This model of a submersible water jet pump is equipped with an overheating relay. The downside is that the float switch is not included.

Pump submersible water jet PROF 55/50

This model is equipped with a powerful 630 W electric motor. The maximum water lift is 50 meters. The immersion of this model can be carried out partially or completely. The maximum diving depth is up to 30 meters.

Submersible pump water jet 60/72

This model fits Russian realities. She has modern design. This model is made of environmentally friendly material. Built-in overheating relay. The set includes a mesh filter. This model is best suited for irrigation of a summer cottage. Has a patented design.

Submersible pump water jet 60/52

This model is the best among all types of submersible pumps. It is designed for pumping clean water. Its main advantage is high efficiency. The maximum head is 52 meters. The power of this model is also very decent - 700 watts. Long power cable 20 meters. Maximum depth up to 30 meters. The submersible water jet pump 60/52 is equipped with a float switch. The body is made of stainless steel. You can buy a Jilex water jet pump of this model in specialized stores without any problems.

Prices submersible pumps water cannon for wells:

• Gileks water cannon 60/52 A, price from 10,000 rubles;
• The price of a water jet pump for wells Water jet 60/62, 55/50 from 10,500 rubles;
• You can buy a water jet pump Prof 55/35 from 6,500 rubles;
• Gileks Water cannon 60/52, its price is from 9000 rubles.

2.1 Systems of the DOM series based on the Vodomet pump

Everyone country cottage area, and on it private house requires constant water supply. As a result, a system was developed for a constant supply of water. It is called "Water cannon house".

This system provides a constant supply of water to a summer cottage and a private house without human intervention.

The system consists of:

1. Pressure sensor and manometer.
2. System control panel.
3. Hydraulic accumulator.
4. Stop valve.
5. Water cannon.

Set of the system "WATER HOUSE":

• Submersible pump.
• Pressure gauge.
• Control panel with pressure sensor.
• Hydraulic accumulator. They are water tanks with a volume of about 50 liters.
• Fittings.
• Stop valve.

This system provides constant water pressure. Saving electricity. Equipped with a current overload sensor, as well as a differential pressure sensor. It also has a soft start system.

Borehole pump "Vodomet" of the company "Dzhileks" proved to be the most adapted in comparison with similar units foreign production. No wonder. Any mechanism is designed to work in certain conditions. The same is true with pumps. Domestic "Vodomet" is designed to work with our water, which differs from foreign in many ways.

The line of pumps "Dzhileks"

The production of submersible borehole pumps "Vodomet" is one of the main activities of the company. As a result of painstaking work, new models of pumping units have been created.

A variety of submersible pumps "Vodomet"

They have very significant differences from similar models from other manufacturers:

• high efficiency;
• increased durability of work;
• decreased sensitivity to dirty water;
• lack of vibration;
• the presence of a "washed" electric motor.

In addition to those listed, there are a number of other differences that are characteristic only for Vodomet products. Some will be discussed a little later.

efficiency (coefficient useful action). For "Water cannons" it is higher than for similar models. The increase was achieved due to the absence of reciprocating motion and the installation of "floating" injection wheels.

The durability of the unit is increased due to the absence of valves and pistons, which are characterized by rapid abrasion during operation.

Sensitivity to dirty water is significantly reduced due to the presence of a mesh filter and a special arrangement of through channels that have the ability to self-clean.

The absence of vibration is achieved by the presence of several impellers. All of them are balanced when the pump is assembled.

The "washed" electric motor is absolutely protected from overheating.

Interesting to know. Produced models of pumps "Vodomet" are constantly being improved. Created new system seals, eliminating the violation of the sealing of the rotating units of the unit.

Design features

The submersible pump "Vodomet" has significant differences in comparison with its foreign analogues. First of all, it is necessary to pay attention to the installation of reinforced bearings on rotating parts. This ensures their trouble-free operation in conditions of high water pollution with sand particles or sedimentary solids.

Submersible pump "Vodomet", scheme

The next not unimportant feature is the optimization of flow channels and impellers. The result is the elimination of the possibility of clogging the pump as a whole. Additionally, the self-cleaning system contributes to this.

The electric motor of the unit is located on top. This arrangement made it possible to significantly reduce the diameter of the entire case, and bring the power cord out from above. Due to this, the size of the water well has also decreased. And this is already a tangible reduction in investments for its installation.

Another feature that is unique to the "Vodomet" is "floating" impellers. Without going into technical aspects, suffice it to say that such an innovation leads to an increase in pump performance and pressure, as well as to a decrease in the electricity consumed by it.

By the way, the electric motor of the unit during its operation is cooled by water passing through a specially made annular slot inside the housing. Overheating of the engine is not terrible, the unit can be operated without turning off for a long time.

Important. The pump is released Russian manufacturer and adapted to work with our water.

Model range of pumps

For small wells equipped for country houses or cottages, the design bureau of the company has developed a number of borehole pumps of the Dzhileks series.

Water cannon pump

They are compact and at the same time have the power to lift water from a depth of several tens of meters. Most units allow you to pump out water in automatic mode. If necessary, they can work without automation.

A wide range of water pumping units will satisfy the taste of any consumer. This is evidenced by the technical characteristics of submersible pumps, presented in the table:

Main characteristics

Models that do not have an automatic mode of operation do not require a special mode of operation. They easily withstand 20 inclusions per hour. In this case, the possibility of engine overheating is completely eliminated.

The next popular group of Dzhileks submersible pump models are models capable of operating in automatic mode. These units do not require human intervention at all. They turn on independently when the water pressure in the system drops, or in the case when the water level in the tank drops more than allowed. And vice versa, they turn off at the moment of reaching the set pressure or its increase above the norm. Their characteristics do not differ from those without automatic control, although the range of models is somewhat expanded.

The principle of operation in automatic mode is the current position of the float switch or the pressure in the chamber of the pumping station.

Popular Models

To fill containers and irrigate plantings, a pumping unit of the Vodomet PROF 55-35 model is quite enough. It can be used in open water bodies with a partial depth of 10-15 cm. It is not recommended for automatic water supply.

Borehole pump "Dzhileks" "Vodomet Prof" 55-50 is one of the most popular models of the company. It supplies water to a height of 50 meters. One of the advantages is the possibility of lowering it to a depth of up to 30 m. It is absolutely silent and economical in operation. Maintenance free. Ideal for autonomous system water supply country house or cottage. A more advanced model "Vodomet" PROF 55-90 allows installation in wells up to 95 meters deep.

The downhole pump "Vodomet" PROF 40-50 has a capacity of 40 l / min, therefore it is used in wells with a low debit. Is one of the best options country house applications.

Submersible pump "Vodomet" 60-32 is an analogue of the considered model. After modernization, it is able to pump out water containing up to 2 kg of sand per 1 m³. As a result of using modern materials in rubbing parts and competent constructive solutions little wear. Able to lift water from a depth of 90 meters.

Other models of pumps "Vodomet" are structurally similar to those considered. They differ in technical characteristics - power, performance and others. Specific figures can be seen in the table and the “Pump Operating Instructions”. Detailed information must be given by the sales assistant when purchasing the unit.

Pump installation

The submersible pump for the well of the company "Dzhileks" is installed in the water supply system similarly to other downhole units. From the correct installation in the future will depend on the performance of the entire water supply system. Install the pump carefully, following all recommendations for its installation. The most unpleasant thing that can happen as a result of installation errors is drilling a new well and installing another pump.

To exclude the possibility of such a situation, it is necessary:

1. Perform installation pumping equipment.
2. Install check valve.
3. Make sure the pump is assembled correctly.
4. Lower the pump into the well.
5. Fasten the cable to the head.

Installation of pumping equipment. It is carried out on the surface. A cable is attached to the pump, a cable is unwound, a pipeline is connected.

Check valve. Protects the entire water supply system from water hammer. Attached either directly to the pump housing or in the pipeline.

Correct assembly. All connections are checked, the insulation of the twisted wires, the fastening of the clamps.

Lowering the pump into the well performed smoothly, without jerks. After lowering to a predetermined depth, the safety cable is securely fixed to the head.

For more information on preparing for the installation of the pump, see the video at the end of the article.

Note. Holding the pump during the descent is carried out only by the cable.

The downhole pump "Vodomet" is gaining more and more popularity in the consumer market. The high quality of the product, ease of installation and reliability in operation make it indispensable in the autonomous water supply of private houses. The multi-vector design allows the use of Dzhileks products not only in wells, but also in wells and open water bodies.

Don't forget to rate the article.

A downhole pump, by definition, cannot be cheap. When working in a filter well, it is regularly exposed to particles of sand and silt, and water has to be delivered from artesian structures to a sufficiently high height.

In search of a reliable device at an affordable price, owners of private plots most often choose a water pump manufactured by Dzhileks. In this material, we will consider in detail the device and the principle of operation of the equipment, we will talk about the features of its selection and use.

Pumps "Vodomet" have a fairly wide range of applications. With their help, you can pump water from wells of various depths, as well as from wells and open reservoirs.

They perfectly cope with the autonomous water supply of a private house, are used for watering the site, garden, etc. In this case, the diameter of the well should be 100 mm or more.

The case is made of high quality stainless steel. The top point of the pump is sealed in such a way that during its operation sand and other contaminants do not enter the casing from above.

The pump motor is enclosed in a sealed glass filled with oil. This design eliminates Negative influence external factors and protects the engine from damage.

The design and dimensions of the “Vodomet” pump allow it to be installed in wells with casing pipe diameter 100 mm or more

The device is oil-filled, asynchronous, the motor rotor is squirrel-cage, mounted on rolling bearings. The motor is partially protected from overheating by a thermal protector built into the stator winding. In addition, an additional cooling factor is water passing through a special annular gap left between the housing and the motor stator.

To balance the external and internal pressure of the engine, a special membrane is used. This allows the motor seal to be unloaded. As a result, the technical characteristics allow the use of the Vodomet pump at a depth of up to 30 meters. The top and bottom covers are arranged in such a way that all components of the device are in correct position about the central axis.

An important feature of the pump design is the presence of so-called “floating” impellers, which have the ability to run in. The efficiency of traditional pumping equipment largely depends on the size of the clearance that forms between its moving and static parts.

The larger such a gap, the more internal fluid leakage occurs inside the device, and the lower its efficiency. During the operation of the pump, the moving elements are gradually erased, which increases the clearance, and the efficiency becomes even lower. The design of the "floating" impellers of the "Vodomet" pump gives them the ability to move in the axial direction.

Deciphering the markings of various models

The marking of the pump in the form of letter indices reflects the design features of individual models:

• "BK"– the cable length of this model is 1 m.
• "BUT"(automatic) - the presence of a float switch that prevents the situation of "dry running".
• "PROF"– pumps for wells without an automatic shutdown system.
• "M"(main) - equipped with a fitting that allows you to use the pump on the surface, as an element of the water supply system.
• "HOUSE"- additionally equipped with components for the organization of automated water supply of a private house.
• "H"- Availability electronic system automatic pump control.

Devices marked with the index “A” can be installed in wells or other structures where there is sufficient free space for mounting a float switch.

The range of products manufactured by GILEX includes several models of borehole pumps with different technical specifications. This equipment is intended for use as part of domestic and industrial water supply systems with water intake from wells and wells. According to users, well pumps from JILEKS LLC are among the best on the Russian market.

Rules for choosing pumping equipment

The efficiency of an autonomous water supply system with forced water supply depends on the compliance of the technical characteristics of the pumping unit used with the conditions of water use. To do this, it is necessary to make a thorough analysis of all the nuances of the upcoming operation even before ordering the equipment. If you are faced with the question of which well pump is better to choose, consider the following criteria:

• well flow rate and volume of water consumption, the maximum number of inclusions per hour;
• temperature of the pumped liquid;
• parameters of the existing electrical network;
• water quality, presence and size of mechanical impurities;
• possible immersion depth for the submersible unit.

One of the most popular borehole pumps of the JILEKS company is the VODOMET centrifugal submersible unit. This equipment is available in several modifications, which allows you to choose a device with optimal technical characteristics for specific conditions of use. Each model is distinguished by high reliability, unpretentiousness, efficiency, and has a high efficiency. When choosing, use the online consultation of our company's specialists. Channels for communication are given in the "Contacts" section.